linux_dsm_epyc7002/drivers/iio/chemical/atlas-sensor.c
Matt Ranostay 0d15190f53 iio: chemical: atlas-ph-sensor: rename atlas-ph-sensor to atlas-sensor
Since the orginal scope of the driver was to only support
the pH product from Atlas it has evolved to other sensors.

Rename the file, driver name, and regmap to atlas-sensor which
reflects this, although keep CONFIG_ATLAS_PH_SENSOR to not cause
regressions with current configurations.

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-29 15:20:06 +00:00

685 lines
16 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* atlas-sensor.c - Support for Atlas Scientific OEM SM sensors
*
* Copyright (C) 2015-2019 Konsulko Group
* Author: Matt Ranostay <matt.ranostay@konsulko.com>
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/irq.h>
#include <linux/irq_work.h>
#include <linux/i2c.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/pm_runtime.h>
#define ATLAS_REGMAP_NAME "atlas_regmap"
#define ATLAS_DRV_NAME "atlas"
#define ATLAS_REG_DEV_TYPE 0x00
#define ATLAS_REG_DEV_VERSION 0x01
#define ATLAS_REG_INT_CONTROL 0x04
#define ATLAS_REG_INT_CONTROL_EN BIT(3)
#define ATLAS_REG_PWR_CONTROL 0x06
#define ATLAS_REG_PH_CALIB_STATUS 0x0d
#define ATLAS_REG_PH_CALIB_STATUS_MASK 0x07
#define ATLAS_REG_PH_CALIB_STATUS_LOW BIT(0)
#define ATLAS_REG_PH_CALIB_STATUS_MID BIT(1)
#define ATLAS_REG_PH_CALIB_STATUS_HIGH BIT(2)
#define ATLAS_REG_EC_CALIB_STATUS 0x0f
#define ATLAS_REG_EC_CALIB_STATUS_MASK 0x0f
#define ATLAS_REG_EC_CALIB_STATUS_DRY BIT(0)
#define ATLAS_REG_EC_CALIB_STATUS_SINGLE BIT(1)
#define ATLAS_REG_EC_CALIB_STATUS_LOW BIT(2)
#define ATLAS_REG_EC_CALIB_STATUS_HIGH BIT(3)
#define ATLAS_REG_PH_TEMP_DATA 0x0e
#define ATLAS_REG_PH_DATA 0x16
#define ATLAS_REG_EC_PROBE 0x08
#define ATLAS_REG_EC_TEMP_DATA 0x10
#define ATLAS_REG_EC_DATA 0x18
#define ATLAS_REG_TDS_DATA 0x1c
#define ATLAS_REG_PSS_DATA 0x20
#define ATLAS_REG_ORP_CALIB_STATUS 0x0d
#define ATLAS_REG_ORP_DATA 0x0e
#define ATLAS_PH_INT_TIME_IN_MS 450
#define ATLAS_EC_INT_TIME_IN_MS 650
#define ATLAS_ORP_INT_TIME_IN_MS 450
enum {
ATLAS_PH_SM,
ATLAS_EC_SM,
ATLAS_ORP_SM,
};
struct atlas_data {
struct i2c_client *client;
struct iio_trigger *trig;
struct atlas_device *chip;
struct regmap *regmap;
struct irq_work work;
__be32 buffer[6]; /* 96-bit data + 32-bit pad + 64-bit timestamp */
};
static const struct regmap_config atlas_regmap_config = {
.name = ATLAS_REGMAP_NAME,
.reg_bits = 8,
.val_bits = 8,
};
static const struct iio_chan_spec atlas_ph_channels[] = {
{
.type = IIO_PH,
.address = ATLAS_REG_PH_DATA,
.info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
.scan_index = 0,
.scan_type = {
.sign = 'u',
.realbits = 32,
.storagebits = 32,
.endianness = IIO_BE,
},
},
IIO_CHAN_SOFT_TIMESTAMP(1),
{
.type = IIO_TEMP,
.address = ATLAS_REG_PH_TEMP_DATA,
.info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
.output = 1,
.scan_index = -1
},
};
#define ATLAS_EC_CHANNEL(_idx, _addr) \
{\
.type = IIO_CONCENTRATION, \
.indexed = 1, \
.channel = _idx, \
.address = _addr, \
.info_mask_separate = \
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \
.scan_index = _idx + 1, \
.scan_type = { \
.sign = 'u', \
.realbits = 32, \
.storagebits = 32, \
.endianness = IIO_BE, \
}, \
}
static const struct iio_chan_spec atlas_ec_channels[] = {
{
.type = IIO_ELECTRICALCONDUCTIVITY,
.address = ATLAS_REG_EC_DATA,
.info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
.scan_index = 0,
.scan_type = {
.sign = 'u',
.realbits = 32,
.storagebits = 32,
.endianness = IIO_BE,
},
},
ATLAS_EC_CHANNEL(0, ATLAS_REG_TDS_DATA),
ATLAS_EC_CHANNEL(1, ATLAS_REG_PSS_DATA),
IIO_CHAN_SOFT_TIMESTAMP(3),
{
.type = IIO_TEMP,
.address = ATLAS_REG_EC_TEMP_DATA,
.info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
.output = 1,
.scan_index = -1
},
};
static const struct iio_chan_spec atlas_orp_channels[] = {
{
.type = IIO_VOLTAGE,
.address = ATLAS_REG_ORP_DATA,
.info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
.scan_index = 0,
.scan_type = {
.sign = 's',
.realbits = 32,
.storagebits = 32,
.endianness = IIO_BE,
},
},
IIO_CHAN_SOFT_TIMESTAMP(1),
};
static int atlas_check_ph_calibration(struct atlas_data *data)
{
struct device *dev = &data->client->dev;
int ret;
unsigned int val;
ret = regmap_read(data->regmap, ATLAS_REG_PH_CALIB_STATUS, &val);
if (ret)
return ret;
if (!(val & ATLAS_REG_PH_CALIB_STATUS_MASK)) {
dev_warn(dev, "device has not been calibrated\n");
return 0;
}
if (!(val & ATLAS_REG_PH_CALIB_STATUS_LOW))
dev_warn(dev, "device missing low point calibration\n");
if (!(val & ATLAS_REG_PH_CALIB_STATUS_MID))
dev_warn(dev, "device missing mid point calibration\n");
if (!(val & ATLAS_REG_PH_CALIB_STATUS_HIGH))
dev_warn(dev, "device missing high point calibration\n");
return 0;
}
static int atlas_check_ec_calibration(struct atlas_data *data)
{
struct device *dev = &data->client->dev;
int ret;
unsigned int val;
__be16 rval;
ret = regmap_bulk_read(data->regmap, ATLAS_REG_EC_PROBE, &rval, 2);
if (ret)
return ret;
val = be16_to_cpu(rval);
dev_info(dev, "probe set to K = %d.%.2d", val / 100, val % 100);
ret = regmap_read(data->regmap, ATLAS_REG_EC_CALIB_STATUS, &val);
if (ret)
return ret;
if (!(val & ATLAS_REG_EC_CALIB_STATUS_MASK)) {
dev_warn(dev, "device has not been calibrated\n");
return 0;
}
if (!(val & ATLAS_REG_EC_CALIB_STATUS_DRY))
dev_warn(dev, "device missing dry point calibration\n");
if (val & ATLAS_REG_EC_CALIB_STATUS_SINGLE) {
dev_warn(dev, "device using single point calibration\n");
} else {
if (!(val & ATLAS_REG_EC_CALIB_STATUS_LOW))
dev_warn(dev, "device missing low point calibration\n");
if (!(val & ATLAS_REG_EC_CALIB_STATUS_HIGH))
dev_warn(dev, "device missing high point calibration\n");
}
return 0;
}
static int atlas_check_orp_calibration(struct atlas_data *data)
{
struct device *dev = &data->client->dev;
int ret;
unsigned int val;
ret = regmap_read(data->regmap, ATLAS_REG_ORP_CALIB_STATUS, &val);
if (ret)
return ret;
if (!val)
dev_warn(dev, "device has not been calibrated\n");
return 0;
};
struct atlas_device {
const struct iio_chan_spec *channels;
int num_channels;
int data_reg;
int (*calibration)(struct atlas_data *data);
int delay;
};
static struct atlas_device atlas_devices[] = {
[ATLAS_PH_SM] = {
.channels = atlas_ph_channels,
.num_channels = 3,
.data_reg = ATLAS_REG_PH_DATA,
.calibration = &atlas_check_ph_calibration,
.delay = ATLAS_PH_INT_TIME_IN_MS,
},
[ATLAS_EC_SM] = {
.channels = atlas_ec_channels,
.num_channels = 5,
.data_reg = ATLAS_REG_EC_DATA,
.calibration = &atlas_check_ec_calibration,
.delay = ATLAS_EC_INT_TIME_IN_MS,
},
[ATLAS_ORP_SM] = {
.channels = atlas_orp_channels,
.num_channels = 2,
.data_reg = ATLAS_REG_ORP_DATA,
.calibration = &atlas_check_orp_calibration,
.delay = ATLAS_ORP_INT_TIME_IN_MS,
},
};
static int atlas_set_powermode(struct atlas_data *data, int on)
{
return regmap_write(data->regmap, ATLAS_REG_PWR_CONTROL, on);
}
static int atlas_set_interrupt(struct atlas_data *data, bool state)
{
return regmap_update_bits(data->regmap, ATLAS_REG_INT_CONTROL,
ATLAS_REG_INT_CONTROL_EN,
state ? ATLAS_REG_INT_CONTROL_EN : 0);
}
static int atlas_buffer_postenable(struct iio_dev *indio_dev)
{
struct atlas_data *data = iio_priv(indio_dev);
int ret;
ret = iio_triggered_buffer_postenable(indio_dev);
if (ret)
return ret;
ret = pm_runtime_get_sync(&data->client->dev);
if (ret < 0) {
pm_runtime_put_noidle(&data->client->dev);
return ret;
}
return atlas_set_interrupt(data, true);
}
static int atlas_buffer_predisable(struct iio_dev *indio_dev)
{
struct atlas_data *data = iio_priv(indio_dev);
int ret;
ret = atlas_set_interrupt(data, false);
if (ret)
return ret;
pm_runtime_mark_last_busy(&data->client->dev);
ret = pm_runtime_put_autosuspend(&data->client->dev);
if (ret)
return ret;
return iio_triggered_buffer_predisable(indio_dev);
}
static const struct iio_trigger_ops atlas_interrupt_trigger_ops = {
};
static const struct iio_buffer_setup_ops atlas_buffer_setup_ops = {
.postenable = atlas_buffer_postenable,
.predisable = atlas_buffer_predisable,
};
static void atlas_work_handler(struct irq_work *work)
{
struct atlas_data *data = container_of(work, struct atlas_data, work);
iio_trigger_poll(data->trig);
}
static irqreturn_t atlas_trigger_handler(int irq, void *private)
{
struct iio_poll_func *pf = private;
struct iio_dev *indio_dev = pf->indio_dev;
struct atlas_data *data = iio_priv(indio_dev);
int ret;
ret = regmap_bulk_read(data->regmap, data->chip->data_reg,
(u8 *) &data->buffer,
sizeof(__be32) * (data->chip->num_channels - 2));
if (!ret)
iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
iio_get_time_ns(indio_dev));
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static irqreturn_t atlas_interrupt_handler(int irq, void *private)
{
struct iio_dev *indio_dev = private;
struct atlas_data *data = iio_priv(indio_dev);
irq_work_queue(&data->work);
return IRQ_HANDLED;
}
static int atlas_read_measurement(struct atlas_data *data, int reg, __be32 *val)
{
struct device *dev = &data->client->dev;
int suspended = pm_runtime_suspended(dev);
int ret;
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
pm_runtime_put_noidle(dev);
return ret;
}
if (suspended)
msleep(data->chip->delay);
ret = regmap_bulk_read(data->regmap, reg, (u8 *) val, sizeof(*val));
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
return ret;
}
static int atlas_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct atlas_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW: {
int ret;
__be32 reg;
switch (chan->type) {
case IIO_TEMP:
ret = regmap_bulk_read(data->regmap, chan->address,
(u8 *) &reg, sizeof(reg));
break;
case IIO_PH:
case IIO_CONCENTRATION:
case IIO_ELECTRICALCONDUCTIVITY:
case IIO_VOLTAGE:
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
ret = atlas_read_measurement(data, chan->address, &reg);
iio_device_release_direct_mode(indio_dev);
break;
default:
ret = -EINVAL;
}
if (!ret) {
*val = be32_to_cpu(reg);
ret = IIO_VAL_INT;
}
return ret;
}
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_TEMP:
*val = 10;
return IIO_VAL_INT;
case IIO_PH:
*val = 1; /* 0.001 */
*val2 = 1000;
break;
case IIO_ELECTRICALCONDUCTIVITY:
*val = 1; /* 0.00001 */
*val2 = 100000;
break;
case IIO_CONCENTRATION:
*val = 0; /* 0.000000001 */
*val2 = 1000;
return IIO_VAL_INT_PLUS_NANO;
case IIO_VOLTAGE:
*val = 1; /* 0.1 */
*val2 = 10;
break;
default:
return -EINVAL;
}
return IIO_VAL_FRACTIONAL;
}
return -EINVAL;
}
static int atlas_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct atlas_data *data = iio_priv(indio_dev);
__be32 reg = cpu_to_be32(val / 10);
if (val2 != 0 || val < 0 || val > 20000)
return -EINVAL;
if (mask != IIO_CHAN_INFO_RAW || chan->type != IIO_TEMP)
return -EINVAL;
return regmap_bulk_write(data->regmap, chan->address,
&reg, sizeof(reg));
}
static const struct iio_info atlas_info = {
.read_raw = atlas_read_raw,
.write_raw = atlas_write_raw,
};
static const struct i2c_device_id atlas_id[] = {
{ "atlas-ph-sm", ATLAS_PH_SM},
{ "atlas-ec-sm", ATLAS_EC_SM},
{ "atlas-orp-sm", ATLAS_ORP_SM},
{}
};
MODULE_DEVICE_TABLE(i2c, atlas_id);
static const struct of_device_id atlas_dt_ids[] = {
{ .compatible = "atlas,ph-sm", .data = (void *)ATLAS_PH_SM, },
{ .compatible = "atlas,ec-sm", .data = (void *)ATLAS_EC_SM, },
{ .compatible = "atlas,orp-sm", .data = (void *)ATLAS_ORP_SM, },
{ }
};
MODULE_DEVICE_TABLE(of, atlas_dt_ids);
static int atlas_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct atlas_data *data;
struct atlas_device *chip;
const struct of_device_id *of_id;
struct iio_trigger *trig;
struct iio_dev *indio_dev;
int ret;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
of_id = of_match_device(atlas_dt_ids, &client->dev);
if (!of_id)
chip = &atlas_devices[id->driver_data];
else
chip = &atlas_devices[(unsigned long)of_id->data];
indio_dev->info = &atlas_info;
indio_dev->name = ATLAS_DRV_NAME;
indio_dev->channels = chip->channels;
indio_dev->num_channels = chip->num_channels;
indio_dev->modes = INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE;
indio_dev->dev.parent = &client->dev;
trig = devm_iio_trigger_alloc(&client->dev, "%s-dev%d",
indio_dev->name, indio_dev->id);
if (!trig)
return -ENOMEM;
data = iio_priv(indio_dev);
data->client = client;
data->trig = trig;
data->chip = chip;
trig->dev.parent = indio_dev->dev.parent;
trig->ops = &atlas_interrupt_trigger_ops;
iio_trigger_set_drvdata(trig, indio_dev);
i2c_set_clientdata(client, indio_dev);
data->regmap = devm_regmap_init_i2c(client, &atlas_regmap_config);
if (IS_ERR(data->regmap)) {
dev_err(&client->dev, "regmap initialization failed\n");
return PTR_ERR(data->regmap);
}
ret = pm_runtime_set_active(&client->dev);
if (ret)
return ret;
if (client->irq <= 0) {
dev_err(&client->dev, "no valid irq defined\n");
return -EINVAL;
}
ret = chip->calibration(data);
if (ret)
return ret;
ret = iio_trigger_register(trig);
if (ret) {
dev_err(&client->dev, "failed to register trigger\n");
return ret;
}
ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
&atlas_trigger_handler, &atlas_buffer_setup_ops);
if (ret) {
dev_err(&client->dev, "cannot setup iio trigger\n");
goto unregister_trigger;
}
init_irq_work(&data->work, atlas_work_handler);
/* interrupt pin toggles on new conversion */
ret = devm_request_threaded_irq(&client->dev, client->irq,
NULL, atlas_interrupt_handler,
IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"atlas_irq",
indio_dev);
if (ret) {
dev_err(&client->dev, "request irq (%d) failed\n", client->irq);
goto unregister_buffer;
}
ret = atlas_set_powermode(data, 1);
if (ret) {
dev_err(&client->dev, "cannot power device on");
goto unregister_buffer;
}
pm_runtime_enable(&client->dev);
pm_runtime_set_autosuspend_delay(&client->dev, 2500);
pm_runtime_use_autosuspend(&client->dev);
ret = iio_device_register(indio_dev);
if (ret) {
dev_err(&client->dev, "unable to register device\n");
goto unregister_pm;
}
return 0;
unregister_pm:
pm_runtime_disable(&client->dev);
atlas_set_powermode(data, 0);
unregister_buffer:
iio_triggered_buffer_cleanup(indio_dev);
unregister_trigger:
iio_trigger_unregister(data->trig);
return ret;
}
static int atlas_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct atlas_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
iio_trigger_unregister(data->trig);
pm_runtime_disable(&client->dev);
pm_runtime_set_suspended(&client->dev);
pm_runtime_put_noidle(&client->dev);
return atlas_set_powermode(data, 0);
}
#ifdef CONFIG_PM
static int atlas_runtime_suspend(struct device *dev)
{
struct atlas_data *data =
iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
return atlas_set_powermode(data, 0);
}
static int atlas_runtime_resume(struct device *dev)
{
struct atlas_data *data =
iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
return atlas_set_powermode(data, 1);
}
#endif
static const struct dev_pm_ops atlas_pm_ops = {
SET_RUNTIME_PM_OPS(atlas_runtime_suspend,
atlas_runtime_resume, NULL)
};
static struct i2c_driver atlas_driver = {
.driver = {
.name = ATLAS_DRV_NAME,
.of_match_table = of_match_ptr(atlas_dt_ids),
.pm = &atlas_pm_ops,
},
.probe = atlas_probe,
.remove = atlas_remove,
.id_table = atlas_id,
};
module_i2c_driver(atlas_driver);
MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
MODULE_DESCRIPTION("Atlas Scientific SM sensors");
MODULE_LICENSE("GPL");