mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 12:36:40 +07:00
4b300c362d
Fix the unregistration order in the i.MX serial driver Signed-off-by: Sreekrishnan Venkateswaran <krishhna@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
1127 lines
30 KiB
C
1127 lines
30 KiB
C
/*
|
|
* linux/drivers/serial/imx.c
|
|
*
|
|
* Driver for Motorola IMX serial ports
|
|
*
|
|
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
|
|
*
|
|
* Author: Sascha Hauer <sascha@saschahauer.de>
|
|
* Copyright (C) 2004 Pengutronix
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* [29-Mar-2005] Mike Lee
|
|
* Added hardware handshake
|
|
*/
|
|
|
|
#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
#define SUPPORT_SYSRQ
|
|
#endif
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/arch/imx-uart.h>
|
|
|
|
/* Register definitions */
|
|
#define URXD0 0x0 /* Receiver Register */
|
|
#define URTX0 0x40 /* Transmitter Register */
|
|
#define UCR1 0x80 /* Control Register 1 */
|
|
#define UCR2 0x84 /* Control Register 2 */
|
|
#define UCR3 0x88 /* Control Register 3 */
|
|
#define UCR4 0x8c /* Control Register 4 */
|
|
#define UFCR 0x90 /* FIFO Control Register */
|
|
#define USR1 0x94 /* Status Register 1 */
|
|
#define USR2 0x98 /* Status Register 2 */
|
|
#define UESC 0x9c /* Escape Character Register */
|
|
#define UTIM 0xa0 /* Escape Timer Register */
|
|
#define UBIR 0xa4 /* BRM Incremental Register */
|
|
#define UBMR 0xa8 /* BRM Modulator Register */
|
|
#define UBRC 0xac /* Baud Rate Count Register */
|
|
#define BIPR1 0xb0 /* Incremental Preset Register 1 */
|
|
#define BIPR2 0xb4 /* Incremental Preset Register 2 */
|
|
#define BIPR3 0xb8 /* Incremental Preset Register 3 */
|
|
#define BIPR4 0xbc /* Incremental Preset Register 4 */
|
|
#define BMPR1 0xc0 /* BRM Modulator Register 1 */
|
|
#define BMPR2 0xc4 /* BRM Modulator Register 2 */
|
|
#define BMPR3 0xc8 /* BRM Modulator Register 3 */
|
|
#define BMPR4 0xcc /* BRM Modulator Register 4 */
|
|
#define UTS 0xd0 /* UART Test Register */
|
|
|
|
/* UART Control Register Bit Fields.*/
|
|
#define URXD_CHARRDY (1<<15)
|
|
#define URXD_ERR (1<<14)
|
|
#define URXD_OVRRUN (1<<13)
|
|
#define URXD_FRMERR (1<<12)
|
|
#define URXD_BRK (1<<11)
|
|
#define URXD_PRERR (1<<10)
|
|
#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */
|
|
#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
|
|
#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
|
|
#define UCR1_IDEN (1<<12) /* Idle condition interrupt */
|
|
#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
|
|
#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
|
|
#define UCR1_IREN (1<<7) /* Infrared interface enable */
|
|
#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
|
|
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
|
|
#define UCR1_SNDBRK (1<<4) /* Send break */
|
|
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
|
|
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
|
|
#define UCR1_DOZE (1<<1) /* Doze */
|
|
#define UCR1_UARTEN (1<<0) /* UART enabled */
|
|
#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
|
|
#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
|
|
#define UCR2_CTSC (1<<13) /* CTS pin control */
|
|
#define UCR2_CTS (1<<12) /* Clear to send */
|
|
#define UCR2_ESCEN (1<<11) /* Escape enable */
|
|
#define UCR2_PREN (1<<8) /* Parity enable */
|
|
#define UCR2_PROE (1<<7) /* Parity odd/even */
|
|
#define UCR2_STPB (1<<6) /* Stop */
|
|
#define UCR2_WS (1<<5) /* Word size */
|
|
#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
|
|
#define UCR2_TXEN (1<<2) /* Transmitter enabled */
|
|
#define UCR2_RXEN (1<<1) /* Receiver enabled */
|
|
#define UCR2_SRST (1<<0) /* SW reset */
|
|
#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
|
|
#define UCR3_PARERREN (1<<12) /* Parity enable */
|
|
#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
|
|
#define UCR3_DSR (1<<10) /* Data set ready */
|
|
#define UCR3_DCD (1<<9) /* Data carrier detect */
|
|
#define UCR3_RI (1<<8) /* Ring indicator */
|
|
#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
|
|
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
|
|
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
|
|
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
|
|
#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
|
|
#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
|
|
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
|
|
#define UCR3_BPEN (1<<0) /* Preset registers enable */
|
|
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
|
|
#define UCR4_INVR (1<<9) /* Inverted infrared reception */
|
|
#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
|
|
#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
|
|
#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
|
|
#define UCR4_IRSC (1<<5) /* IR special case */
|
|
#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
|
|
#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
|
|
#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
|
|
#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
|
|
#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
|
|
#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
|
|
#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
|
|
#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
|
|
#define USR1_RTSS (1<<14) /* RTS pin status */
|
|
#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
|
|
#define USR1_RTSD (1<<12) /* RTS delta */
|
|
#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
|
|
#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
|
|
#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
|
|
#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
|
|
#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
|
|
#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
|
|
#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
|
|
#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
|
|
#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
|
|
#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
|
|
#define USR2_IDLE (1<<12) /* Idle condition */
|
|
#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
|
|
#define USR2_WAKE (1<<7) /* Wake */
|
|
#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
|
|
#define USR2_TXDC (1<<3) /* Transmitter complete */
|
|
#define USR2_BRCD (1<<2) /* Break condition */
|
|
#define USR2_ORE (1<<1) /* Overrun error */
|
|
#define USR2_RDR (1<<0) /* Recv data ready */
|
|
#define UTS_FRCPERR (1<<13) /* Force parity error */
|
|
#define UTS_LOOP (1<<12) /* Loop tx and rx */
|
|
#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
|
|
#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
|
|
#define UTS_TXFULL (1<<4) /* TxFIFO full */
|
|
#define UTS_RXFULL (1<<3) /* RxFIFO full */
|
|
#define UTS_SOFTRST (1<<0) /* Software reset */
|
|
|
|
/* We've been assigned a range on the "Low-density serial ports" major */
|
|
#define SERIAL_IMX_MAJOR 204
|
|
#define MINOR_START 41
|
|
|
|
#define NR_PORTS 2
|
|
|
|
#define IMX_ISR_PASS_LIMIT 256
|
|
|
|
/*
|
|
* This is the size of our serial port register set.
|
|
*/
|
|
#define UART_PORT_SIZE 0x100
|
|
|
|
/*
|
|
* This determines how often we check the modem status signals
|
|
* for any change. They generally aren't connected to an IRQ
|
|
* so we have to poll them. We also check immediately before
|
|
* filling the TX fifo incase CTS has been dropped.
|
|
*/
|
|
#define MCTRL_TIMEOUT (250*HZ/1000)
|
|
|
|
#define DRIVER_NAME "IMX-uart"
|
|
|
|
struct imx_port {
|
|
struct uart_port port;
|
|
struct timer_list timer;
|
|
unsigned int old_status;
|
|
int txirq,rxirq,rtsirq;
|
|
int have_rtscts:1;
|
|
};
|
|
|
|
/*
|
|
* Handle any change of modem status signal since we were last called.
|
|
*/
|
|
static void imx_mctrl_check(struct imx_port *sport)
|
|
{
|
|
unsigned int status, changed;
|
|
|
|
status = sport->port.ops->get_mctrl(&sport->port);
|
|
changed = status ^ sport->old_status;
|
|
|
|
if (changed == 0)
|
|
return;
|
|
|
|
sport->old_status = status;
|
|
|
|
if (changed & TIOCM_RI)
|
|
sport->port.icount.rng++;
|
|
if (changed & TIOCM_DSR)
|
|
sport->port.icount.dsr++;
|
|
if (changed & TIOCM_CAR)
|
|
uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
|
|
if (changed & TIOCM_CTS)
|
|
uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
|
|
|
|
wake_up_interruptible(&sport->port.info->delta_msr_wait);
|
|
}
|
|
|
|
/*
|
|
* This is our per-port timeout handler, for checking the
|
|
* modem status signals.
|
|
*/
|
|
static void imx_timeout(unsigned long data)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)data;
|
|
unsigned long flags;
|
|
|
|
if (sport->port.info) {
|
|
spin_lock_irqsave(&sport->port.lock, flags);
|
|
imx_mctrl_check(sport);
|
|
spin_unlock_irqrestore(&sport->port.lock, flags);
|
|
|
|
mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* interrupts disabled on entry
|
|
*/
|
|
static void imx_stop_tx(struct uart_port *port)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
unsigned long temp;
|
|
|
|
temp = readl(sport->port.membase + UCR1);
|
|
writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
|
|
}
|
|
|
|
/*
|
|
* interrupts disabled on entry
|
|
*/
|
|
static void imx_stop_rx(struct uart_port *port)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
unsigned long temp;
|
|
|
|
temp = readl(sport->port.membase + UCR2);
|
|
writel(temp &~ UCR2_RXEN, sport->port.membase + UCR2);
|
|
}
|
|
|
|
/*
|
|
* Set the modem control timer to fire immediately.
|
|
*/
|
|
static void imx_enable_ms(struct uart_port *port)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
|
|
mod_timer(&sport->timer, jiffies);
|
|
}
|
|
|
|
static inline void imx_transmit_buffer(struct imx_port *sport)
|
|
{
|
|
struct circ_buf *xmit = &sport->port.info->xmit;
|
|
|
|
while (!(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
|
|
/* send xmit->buf[xmit->tail]
|
|
* out the port here */
|
|
writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
|
|
xmit->tail = (xmit->tail + 1) &
|
|
(UART_XMIT_SIZE - 1);
|
|
sport->port.icount.tx++;
|
|
if (uart_circ_empty(xmit))
|
|
break;
|
|
}
|
|
|
|
if (uart_circ_empty(xmit))
|
|
imx_stop_tx(&sport->port);
|
|
}
|
|
|
|
/*
|
|
* interrupts disabled on entry
|
|
*/
|
|
static void imx_start_tx(struct uart_port *port)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
unsigned long temp;
|
|
|
|
temp = readl(sport->port.membase + UCR1);
|
|
writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
|
|
|
|
if (readl(sport->port.membase + UTS) & UTS_TXEMPTY)
|
|
imx_transmit_buffer(sport);
|
|
}
|
|
|
|
static irqreturn_t imx_rtsint(int irq, void *dev_id)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)dev_id;
|
|
unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&sport->port.lock, flags);
|
|
|
|
writel(USR1_RTSD, sport->port.membase + USR1);
|
|
uart_handle_cts_change(&sport->port, !!val);
|
|
wake_up_interruptible(&sport->port.info->delta_msr_wait);
|
|
|
|
spin_unlock_irqrestore(&sport->port.lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t imx_txint(int irq, void *dev_id)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)dev_id;
|
|
struct circ_buf *xmit = &sport->port.info->xmit;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&sport->port.lock,flags);
|
|
if (sport->port.x_char)
|
|
{
|
|
/* Send next char */
|
|
writel(sport->port.x_char, sport->port.membase + URTX0);
|
|
goto out;
|
|
}
|
|
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
|
|
imx_stop_tx(&sport->port);
|
|
goto out;
|
|
}
|
|
|
|
imx_transmit_buffer(sport);
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&sport->port);
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&sport->port.lock,flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t imx_rxint(int irq, void *dev_id)
|
|
{
|
|
struct imx_port *sport = dev_id;
|
|
unsigned int rx,flg,ignored = 0;
|
|
struct tty_struct *tty = sport->port.info->tty;
|
|
unsigned long flags, temp;
|
|
|
|
rx = readl(sport->port.membase + URXD0);
|
|
spin_lock_irqsave(&sport->port.lock,flags);
|
|
|
|
do {
|
|
flg = TTY_NORMAL;
|
|
sport->port.icount.rx++;
|
|
|
|
temp = readl(sport->port.membase + USR2);
|
|
if( temp & USR2_BRCD ) {
|
|
writel(temp | USR2_BRCD, sport->port.membase + USR2);
|
|
if(uart_handle_break(&sport->port))
|
|
goto ignore_char;
|
|
}
|
|
|
|
if (uart_handle_sysrq_char
|
|
(&sport->port, (unsigned char)rx))
|
|
goto ignore_char;
|
|
|
|
if( rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) )
|
|
goto handle_error;
|
|
|
|
error_return:
|
|
tty_insert_flip_char(tty, rx, flg);
|
|
|
|
ignore_char:
|
|
rx = readl(sport->port.membase + URXD0);
|
|
} while(rx & URXD_CHARRDY);
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&sport->port.lock,flags);
|
|
tty_flip_buffer_push(tty);
|
|
return IRQ_HANDLED;
|
|
|
|
handle_error:
|
|
if (rx & URXD_PRERR)
|
|
sport->port.icount.parity++;
|
|
else if (rx & URXD_FRMERR)
|
|
sport->port.icount.frame++;
|
|
if (rx & URXD_OVRRUN)
|
|
sport->port.icount.overrun++;
|
|
|
|
if (rx & sport->port.ignore_status_mask) {
|
|
if (++ignored > 100)
|
|
goto out;
|
|
goto ignore_char;
|
|
}
|
|
|
|
rx &= sport->port.read_status_mask;
|
|
|
|
if (rx & URXD_PRERR)
|
|
flg = TTY_PARITY;
|
|
else if (rx & URXD_FRMERR)
|
|
flg = TTY_FRAME;
|
|
if (rx & URXD_OVRRUN)
|
|
flg = TTY_OVERRUN;
|
|
|
|
#ifdef SUPPORT_SYSRQ
|
|
sport->port.sysrq = 0;
|
|
#endif
|
|
goto error_return;
|
|
}
|
|
|
|
/*
|
|
* Return TIOCSER_TEMT when transmitter is not busy.
|
|
*/
|
|
static unsigned int imx_tx_empty(struct uart_port *port)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
|
|
return (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0;
|
|
}
|
|
|
|
/*
|
|
* We have a modem side uart, so the meanings of RTS and CTS are inverted.
|
|
*/
|
|
static unsigned int imx_get_mctrl(struct uart_port *port)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
|
|
|
|
if (readl(sport->port.membase + USR1) & USR1_RTSS)
|
|
tmp |= TIOCM_CTS;
|
|
|
|
if (readl(sport->port.membase + UCR2) & UCR2_CTS)
|
|
tmp |= TIOCM_RTS;
|
|
|
|
return tmp;
|
|
}
|
|
|
|
static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
unsigned long temp;
|
|
|
|
temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS;
|
|
|
|
if (mctrl & TIOCM_RTS)
|
|
temp |= UCR2_CTS;
|
|
|
|
writel(temp, sport->port.membase + UCR2);
|
|
}
|
|
|
|
/*
|
|
* Interrupts always disabled.
|
|
*/
|
|
static void imx_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
unsigned long flags, temp;
|
|
|
|
spin_lock_irqsave(&sport->port.lock, flags);
|
|
|
|
temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK;
|
|
|
|
if ( break_state != 0 )
|
|
temp |= UCR1_SNDBRK;
|
|
|
|
writel(temp, sport->port.membase + UCR1);
|
|
|
|
spin_unlock_irqrestore(&sport->port.lock, flags);
|
|
}
|
|
|
|
#define TXTL 2 /* reset default */
|
|
#define RXTL 1 /* reset default */
|
|
|
|
static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
|
|
{
|
|
unsigned int val;
|
|
unsigned int ufcr_rfdiv;
|
|
|
|
/* set receiver / transmitter trigger level.
|
|
* RFDIV is set such way to satisfy requested uartclk value
|
|
*/
|
|
val = TXTL << 10 | RXTL;
|
|
ufcr_rfdiv = (imx_get_perclk1() + sport->port.uartclk / 2) / sport->port.uartclk;
|
|
|
|
if(!ufcr_rfdiv)
|
|
ufcr_rfdiv = 1;
|
|
|
|
if(ufcr_rfdiv >= 7)
|
|
ufcr_rfdiv = 6;
|
|
else
|
|
ufcr_rfdiv = 6 - ufcr_rfdiv;
|
|
|
|
val |= UFCR_RFDIV & (ufcr_rfdiv << 7);
|
|
|
|
writel(val, sport->port.membase + UFCR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx_startup(struct uart_port *port)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
int retval;
|
|
unsigned long flags, temp;
|
|
|
|
imx_setup_ufcr(sport, 0);
|
|
|
|
/* disable the DREN bit (Data Ready interrupt enable) before
|
|
* requesting IRQs
|
|
*/
|
|
temp = readl(sport->port.membase + UCR4);
|
|
writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
|
|
|
|
/*
|
|
* Allocate the IRQ
|
|
*/
|
|
retval = request_irq(sport->rxirq, imx_rxint, 0,
|
|
DRIVER_NAME, sport);
|
|
if (retval) goto error_out1;
|
|
|
|
retval = request_irq(sport->txirq, imx_txint, 0,
|
|
DRIVER_NAME, sport);
|
|
if (retval) goto error_out2;
|
|
|
|
retval = request_irq(sport->rtsirq, imx_rtsint,
|
|
(sport->rtsirq < IMX_IRQS) ? 0 :
|
|
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
DRIVER_NAME, sport);
|
|
if (retval) goto error_out3;
|
|
|
|
/*
|
|
* Finally, clear and enable interrupts
|
|
*/
|
|
writel(USR1_RTSD, sport->port.membase + USR1);
|
|
|
|
temp = readl(sport->port.membase + UCR1);
|
|
temp |= (UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
|
|
writel(temp, sport->port.membase + UCR1);
|
|
|
|
temp = readl(sport->port.membase + UCR2);
|
|
temp |= (UCR2_RXEN | UCR2_TXEN);
|
|
writel(temp, sport->port.membase + UCR2);
|
|
|
|
/*
|
|
* Enable modem status interrupts
|
|
*/
|
|
spin_lock_irqsave(&sport->port.lock,flags);
|
|
imx_enable_ms(&sport->port);
|
|
spin_unlock_irqrestore(&sport->port.lock,flags);
|
|
|
|
return 0;
|
|
|
|
error_out3:
|
|
free_irq(sport->txirq, sport);
|
|
error_out2:
|
|
free_irq(sport->rxirq, sport);
|
|
error_out1:
|
|
return retval;
|
|
}
|
|
|
|
static void imx_shutdown(struct uart_port *port)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
unsigned long temp;
|
|
|
|
/*
|
|
* Stop our timer.
|
|
*/
|
|
del_timer_sync(&sport->timer);
|
|
|
|
/*
|
|
* Free the interrupts
|
|
*/
|
|
free_irq(sport->rtsirq, sport);
|
|
free_irq(sport->txirq, sport);
|
|
free_irq(sport->rxirq, sport);
|
|
|
|
/*
|
|
* Disable all interrupts, port and break condition.
|
|
*/
|
|
|
|
temp = readl(sport->port.membase + UCR1);
|
|
temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
|
|
writel(temp, sport->port.membase + UCR1);
|
|
}
|
|
|
|
static void
|
|
imx_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
struct ktermios *old)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
unsigned long flags;
|
|
unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
|
|
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
|
|
|
|
/*
|
|
* If we don't support modem control lines, don't allow
|
|
* these to be set.
|
|
*/
|
|
if (0) {
|
|
termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
|
|
termios->c_cflag |= CLOCAL;
|
|
}
|
|
|
|
/*
|
|
* We only support CS7 and CS8.
|
|
*/
|
|
while ((termios->c_cflag & CSIZE) != CS7 &&
|
|
(termios->c_cflag & CSIZE) != CS8) {
|
|
termios->c_cflag &= ~CSIZE;
|
|
termios->c_cflag |= old_csize;
|
|
old_csize = CS8;
|
|
}
|
|
|
|
if ((termios->c_cflag & CSIZE) == CS8)
|
|
ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS;
|
|
else
|
|
ucr2 = UCR2_SRST | UCR2_IRTS;
|
|
|
|
if (termios->c_cflag & CRTSCTS) {
|
|
if( sport->have_rtscts ) {
|
|
ucr2 &= ~UCR2_IRTS;
|
|
ucr2 |= UCR2_CTSC;
|
|
} else {
|
|
termios->c_cflag &= ~CRTSCTS;
|
|
}
|
|
}
|
|
|
|
if (termios->c_cflag & CSTOPB)
|
|
ucr2 |= UCR2_STPB;
|
|
if (termios->c_cflag & PARENB) {
|
|
ucr2 |= UCR2_PREN;
|
|
if (termios->c_cflag & PARODD)
|
|
ucr2 |= UCR2_PROE;
|
|
}
|
|
|
|
/*
|
|
* Ask the core to calculate the divisor for us.
|
|
*/
|
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
|
|
quot = uart_get_divisor(port, baud);
|
|
|
|
spin_lock_irqsave(&sport->port.lock, flags);
|
|
|
|
sport->port.read_status_mask = 0;
|
|
if (termios->c_iflag & INPCK)
|
|
sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR);
|
|
if (termios->c_iflag & (BRKINT | PARMRK))
|
|
sport->port.read_status_mask |= URXD_BRK;
|
|
|
|
/*
|
|
* Characters to ignore
|
|
*/
|
|
sport->port.ignore_status_mask = 0;
|
|
if (termios->c_iflag & IGNPAR)
|
|
sport->port.ignore_status_mask |= URXD_PRERR;
|
|
if (termios->c_iflag & IGNBRK) {
|
|
sport->port.ignore_status_mask |= URXD_BRK;
|
|
/*
|
|
* If we're ignoring parity and break indicators,
|
|
* ignore overruns too (for real raw support).
|
|
*/
|
|
if (termios->c_iflag & IGNPAR)
|
|
sport->port.ignore_status_mask |= URXD_OVRRUN;
|
|
}
|
|
|
|
del_timer_sync(&sport->timer);
|
|
|
|
/*
|
|
* Update the per-port timeout.
|
|
*/
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
/*
|
|
* disable interrupts and drain transmitter
|
|
*/
|
|
old_ucr1 = readl(sport->port.membase + UCR1);
|
|
writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
|
|
sport->port.membase + UCR1);
|
|
|
|
while ( !(readl(sport->port.membase + USR2) & USR2_TXDC))
|
|
barrier();
|
|
|
|
/* then, disable everything */
|
|
old_txrxen = readl(sport->port.membase + UCR2);
|
|
writel(old_txrxen & ~( UCR2_TXEN | UCR2_RXEN),
|
|
sport->port.membase + UCR2);
|
|
old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
|
|
|
|
/* set the baud rate. We assume uartclk = 16 MHz
|
|
*
|
|
* baud * 16 UBIR - 1
|
|
* --------- = --------
|
|
* uartclk UBMR - 1
|
|
*/
|
|
writel((baud / 100) - 1, sport->port.membase + UBIR);
|
|
writel(10000 - 1, sport->port.membase + UBMR);
|
|
|
|
writel(old_ucr1, sport->port.membase + UCR1);
|
|
|
|
/* set the parity, stop bits and data size */
|
|
writel(ucr2 | old_txrxen, sport->port.membase + UCR2);
|
|
|
|
if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
|
|
imx_enable_ms(&sport->port);
|
|
|
|
spin_unlock_irqrestore(&sport->port.lock, flags);
|
|
}
|
|
|
|
static const char *imx_type(struct uart_port *port)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
|
|
return sport->port.type == PORT_IMX ? "IMX" : NULL;
|
|
}
|
|
|
|
/*
|
|
* Release the memory region(s) being used by 'port'.
|
|
*/
|
|
static void imx_release_port(struct uart_port *port)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
|
|
release_mem_region(sport->port.mapbase, UART_PORT_SIZE);
|
|
}
|
|
|
|
/*
|
|
* Request the memory region(s) being used by 'port'.
|
|
*/
|
|
static int imx_request_port(struct uart_port *port)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
|
|
return request_mem_region(sport->port.mapbase, UART_PORT_SIZE,
|
|
"imx-uart") != NULL ? 0 : -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Configure/autoconfigure the port.
|
|
*/
|
|
static void imx_config_port(struct uart_port *port, int flags)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
|
|
if (flags & UART_CONFIG_TYPE &&
|
|
imx_request_port(&sport->port) == 0)
|
|
sport->port.type = PORT_IMX;
|
|
}
|
|
|
|
/*
|
|
* Verify the new serial_struct (for TIOCSSERIAL).
|
|
* The only change we allow are to the flags and type, and
|
|
* even then only between PORT_IMX and PORT_UNKNOWN
|
|
*/
|
|
static int
|
|
imx_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
int ret = 0;
|
|
|
|
if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX)
|
|
ret = -EINVAL;
|
|
if (sport->port.irq != ser->irq)
|
|
ret = -EINVAL;
|
|
if (ser->io_type != UPIO_MEM)
|
|
ret = -EINVAL;
|
|
if (sport->port.uartclk / 16 != ser->baud_base)
|
|
ret = -EINVAL;
|
|
if ((void *)sport->port.mapbase != ser->iomem_base)
|
|
ret = -EINVAL;
|
|
if (sport->port.iobase != ser->port)
|
|
ret = -EINVAL;
|
|
if (ser->hub6 != 0)
|
|
ret = -EINVAL;
|
|
return ret;
|
|
}
|
|
|
|
static struct uart_ops imx_pops = {
|
|
.tx_empty = imx_tx_empty,
|
|
.set_mctrl = imx_set_mctrl,
|
|
.get_mctrl = imx_get_mctrl,
|
|
.stop_tx = imx_stop_tx,
|
|
.start_tx = imx_start_tx,
|
|
.stop_rx = imx_stop_rx,
|
|
.enable_ms = imx_enable_ms,
|
|
.break_ctl = imx_break_ctl,
|
|
.startup = imx_startup,
|
|
.shutdown = imx_shutdown,
|
|
.set_termios = imx_set_termios,
|
|
.type = imx_type,
|
|
.release_port = imx_release_port,
|
|
.request_port = imx_request_port,
|
|
.config_port = imx_config_port,
|
|
.verify_port = imx_verify_port,
|
|
};
|
|
|
|
static struct imx_port imx_ports[] = {
|
|
{
|
|
.txirq = UART1_MINT_TX,
|
|
.rxirq = UART1_MINT_RX,
|
|
.rtsirq = UART1_MINT_RTS,
|
|
.port = {
|
|
.type = PORT_IMX,
|
|
.iotype = UPIO_MEM,
|
|
.membase = (void *)IMX_UART1_BASE,
|
|
.mapbase = IMX_UART1_BASE, /* FIXME */
|
|
.irq = UART1_MINT_RX,
|
|
.uartclk = 16000000,
|
|
.fifosize = 32,
|
|
.flags = UPF_BOOT_AUTOCONF,
|
|
.ops = &imx_pops,
|
|
.line = 0,
|
|
},
|
|
}, {
|
|
.txirq = UART2_MINT_TX,
|
|
.rxirq = UART2_MINT_RX,
|
|
.rtsirq = UART2_MINT_RTS,
|
|
.port = {
|
|
.type = PORT_IMX,
|
|
.iotype = UPIO_MEM,
|
|
.membase = (void *)IMX_UART2_BASE,
|
|
.mapbase = IMX_UART2_BASE, /* FIXME */
|
|
.irq = UART2_MINT_RX,
|
|
.uartclk = 16000000,
|
|
.fifosize = 32,
|
|
.flags = UPF_BOOT_AUTOCONF,
|
|
.ops = &imx_pops,
|
|
.line = 1,
|
|
},
|
|
}
|
|
};
|
|
|
|
/*
|
|
* Setup the IMX serial ports.
|
|
* Note also that we support "console=ttySMXx" where "x" is either 0 or 1.
|
|
* Which serial port this ends up being depends on the machine you're
|
|
* running this kernel on. I'm not convinced that this is a good idea,
|
|
* but that's the way it traditionally works.
|
|
*
|
|
*/
|
|
static void __init imx_init_ports(void)
|
|
{
|
|
static int first = 1;
|
|
int i;
|
|
|
|
if (!first)
|
|
return;
|
|
first = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(imx_ports); i++) {
|
|
init_timer(&imx_ports[i].timer);
|
|
imx_ports[i].timer.function = imx_timeout;
|
|
imx_ports[i].timer.data = (unsigned long)&imx_ports[i];
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_IMX_CONSOLE
|
|
static void imx_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
struct imx_port *sport = (struct imx_port *)port;
|
|
|
|
while (readl(sport->port.membase + UTS) & UTS_TXFULL)
|
|
barrier();
|
|
|
|
writel(ch, sport->port.membase + URTX0);
|
|
}
|
|
|
|
/*
|
|
* Interrupts are disabled on entering
|
|
*/
|
|
static void
|
|
imx_console_write(struct console *co, const char *s, unsigned int count)
|
|
{
|
|
struct imx_port *sport = &imx_ports[co->index];
|
|
unsigned int old_ucr1, old_ucr2;
|
|
|
|
/*
|
|
* First, save UCR1/2 and then disable interrupts
|
|
*/
|
|
old_ucr1 = readl(sport->port.membase + UCR1);
|
|
old_ucr2 = readl(sport->port.membase + UCR2);
|
|
|
|
writel((old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN) &
|
|
~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
|
|
sport->port.membase + UCR1);
|
|
|
|
writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2);
|
|
|
|
uart_console_write(&sport->port, s, count, imx_console_putchar);
|
|
|
|
/*
|
|
* Finally, wait for transmitter to become empty
|
|
* and restore UCR1/2
|
|
*/
|
|
while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
|
|
|
|
writel(old_ucr1, sport->port.membase + UCR1);
|
|
writel(old_ucr2, sport->port.membase + UCR2);
|
|
}
|
|
|
|
/*
|
|
* If the port was already initialised (eg, by a boot loader),
|
|
* try to determine the current setup.
|
|
*/
|
|
static void __init
|
|
imx_console_get_options(struct imx_port *sport, int *baud,
|
|
int *parity, int *bits)
|
|
{
|
|
|
|
if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) {
|
|
/* ok, the port was enabled */
|
|
unsigned int ucr2, ubir,ubmr, uartclk;
|
|
unsigned int baud_raw;
|
|
unsigned int ucfr_rfdiv;
|
|
|
|
ucr2 = readl(sport->port.membase + UCR2);
|
|
|
|
*parity = 'n';
|
|
if (ucr2 & UCR2_PREN) {
|
|
if (ucr2 & UCR2_PROE)
|
|
*parity = 'o';
|
|
else
|
|
*parity = 'e';
|
|
}
|
|
|
|
if (ucr2 & UCR2_WS)
|
|
*bits = 8;
|
|
else
|
|
*bits = 7;
|
|
|
|
ubir = readl(sport->port.membase + UBIR) & 0xffff;
|
|
ubmr = readl(sport->port.membase + UBMR) & 0xffff;
|
|
|
|
ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7;
|
|
if (ucfr_rfdiv == 6)
|
|
ucfr_rfdiv = 7;
|
|
else
|
|
ucfr_rfdiv = 6 - ucfr_rfdiv;
|
|
|
|
uartclk = imx_get_perclk1();
|
|
uartclk /= ucfr_rfdiv;
|
|
|
|
{ /*
|
|
* The next code provides exact computation of
|
|
* baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1))
|
|
* without need of float support or long long division,
|
|
* which would be required to prevent 32bit arithmetic overflow
|
|
*/
|
|
unsigned int mul = ubir + 1;
|
|
unsigned int div = 16 * (ubmr + 1);
|
|
unsigned int rem = uartclk % div;
|
|
|
|
baud_raw = (uartclk / div) * mul;
|
|
baud_raw += (rem * mul + div / 2) / div;
|
|
*baud = (baud_raw + 50) / 100 * 100;
|
|
}
|
|
|
|
if(*baud != baud_raw)
|
|
printk(KERN_INFO "Serial: Console IMX rounded baud rate from %d to %d\n",
|
|
baud_raw, *baud);
|
|
}
|
|
}
|
|
|
|
static int __init
|
|
imx_console_setup(struct console *co, char *options)
|
|
{
|
|
struct imx_port *sport;
|
|
int baud = 9600;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
/*
|
|
* Check whether an invalid uart number has been specified, and
|
|
* if so, search for the first available port that does have
|
|
* console support.
|
|
*/
|
|
if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
|
|
co->index = 0;
|
|
sport = &imx_ports[co->index];
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
else
|
|
imx_console_get_options(sport, &baud, &parity, &bits);
|
|
|
|
imx_setup_ufcr(sport, 0);
|
|
|
|
return uart_set_options(&sport->port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct uart_driver imx_reg;
|
|
static struct console imx_console = {
|
|
.name = "ttySMX",
|
|
.write = imx_console_write,
|
|
.device = uart_console_device,
|
|
.setup = imx_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &imx_reg,
|
|
};
|
|
|
|
static int __init imx_rs_console_init(void)
|
|
{
|
|
imx_init_ports();
|
|
register_console(&imx_console);
|
|
return 0;
|
|
}
|
|
console_initcall(imx_rs_console_init);
|
|
|
|
#define IMX_CONSOLE &imx_console
|
|
#else
|
|
#define IMX_CONSOLE NULL
|
|
#endif
|
|
|
|
static struct uart_driver imx_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = DRIVER_NAME,
|
|
.dev_name = "ttySMX",
|
|
.major = SERIAL_IMX_MAJOR,
|
|
.minor = MINOR_START,
|
|
.nr = ARRAY_SIZE(imx_ports),
|
|
.cons = IMX_CONSOLE,
|
|
};
|
|
|
|
static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
|
|
{
|
|
struct imx_port *sport = platform_get_drvdata(dev);
|
|
|
|
if (sport)
|
|
uart_suspend_port(&imx_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int serial_imx_resume(struct platform_device *dev)
|
|
{
|
|
struct imx_port *sport = platform_get_drvdata(dev);
|
|
|
|
if (sport)
|
|
uart_resume_port(&imx_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int serial_imx_probe(struct platform_device *dev)
|
|
{
|
|
struct imxuart_platform_data *pdata;
|
|
|
|
imx_ports[dev->id].port.dev = &dev->dev;
|
|
|
|
pdata = (struct imxuart_platform_data *)dev->dev.platform_data;
|
|
if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
|
|
imx_ports[dev->id].have_rtscts = 1;
|
|
|
|
uart_add_one_port(&imx_reg, &imx_ports[dev->id].port);
|
|
platform_set_drvdata(dev, &imx_ports[dev->id]);
|
|
return 0;
|
|
}
|
|
|
|
static int serial_imx_remove(struct platform_device *dev)
|
|
{
|
|
struct imx_port *sport = platform_get_drvdata(dev);
|
|
|
|
platform_set_drvdata(dev, NULL);
|
|
|
|
if (sport)
|
|
uart_remove_one_port(&imx_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver serial_imx_driver = {
|
|
.probe = serial_imx_probe,
|
|
.remove = serial_imx_remove,
|
|
|
|
.suspend = serial_imx_suspend,
|
|
.resume = serial_imx_resume,
|
|
.driver = {
|
|
.name = "imx-uart",
|
|
},
|
|
};
|
|
|
|
static int __init imx_serial_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk(KERN_INFO "Serial: IMX driver\n");
|
|
|
|
imx_init_ports();
|
|
|
|
ret = uart_register_driver(&imx_reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = platform_driver_register(&serial_imx_driver);
|
|
if (ret != 0)
|
|
uart_unregister_driver(&imx_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit imx_serial_exit(void)
|
|
{
|
|
platform_driver_unregister(&serial_imx_driver);
|
|
uart_unregister_driver(&imx_reg);
|
|
}
|
|
|
|
module_init(imx_serial_init);
|
|
module_exit(imx_serial_exit);
|
|
|
|
MODULE_AUTHOR("Sascha Hauer");
|
|
MODULE_DESCRIPTION("IMX generic serial port driver");
|
|
MODULE_LICENSE("GPL");
|