linux_dsm_epyc7002/drivers/scsi/sd_zbc.c
Johannes Thumshirn f1cf46115a scsi: sd: sd_zbc: Don't pass GFP_NOIO to kvcalloc
[ Upstream commit 9acced3f58ad24407c1f9ebf53a8892c1e24cdb5 ]

Dan reported we're passing in GFP_NOIO to kvmalloc() which will then
fallback to doing kmalloc() instead of an optional vmalloc() if the size
exceeds kmalloc()s limits. This will break with drives that have zone
numbers exceeding PAGE_SIZE/sizeof(u32).

Instead of passing in GFP_NOIO, enter an implicit GFP_NOIO allocation
scope.

Link: https://lore.kernel.org/r/YCuvSfKw4qEQBr/t@mwanda
Link: https://lore.kernel.org/r/5a6345e2989fd06c049ac4e4627f6acb492c15b8.1613569821.git.johannes.thumshirn@wdc.com
Fixes: 5795eb4430: ("scsi: sd_zbc: emulate ZONE_APPEND commands")
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04 11:38:21 +01:00

810 lines
21 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* SCSI Zoned Block commands
*
* Copyright (C) 2014-2015 SUSE Linux GmbH
* Written by: Hannes Reinecke <hare@suse.de>
* Modified by: Damien Le Moal <damien.lemoal@hgst.com>
* Modified by: Shaun Tancheff <shaun.tancheff@seagate.com>
*/
#include <linux/blkdev.h>
#include <linux/vmalloc.h>
#include <linux/sched/mm.h>
#include <linux/mutex.h>
#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include "sd.h"
static unsigned int sd_zbc_get_zone_wp_offset(struct blk_zone *zone)
{
if (zone->type == ZBC_ZONE_TYPE_CONV)
return 0;
switch (zone->cond) {
case BLK_ZONE_COND_IMP_OPEN:
case BLK_ZONE_COND_EXP_OPEN:
case BLK_ZONE_COND_CLOSED:
return zone->wp - zone->start;
case BLK_ZONE_COND_FULL:
return zone->len;
case BLK_ZONE_COND_EMPTY:
case BLK_ZONE_COND_OFFLINE:
case BLK_ZONE_COND_READONLY:
default:
/*
* Offline and read-only zones do not have a valid
* write pointer. Use 0 as for an empty zone.
*/
return 0;
}
}
static int sd_zbc_parse_report(struct scsi_disk *sdkp, u8 *buf,
unsigned int idx, report_zones_cb cb, void *data)
{
struct scsi_device *sdp = sdkp->device;
struct blk_zone zone = { 0 };
int ret;
zone.type = buf[0] & 0x0f;
zone.cond = (buf[1] >> 4) & 0xf;
if (buf[1] & 0x01)
zone.reset = 1;
if (buf[1] & 0x02)
zone.non_seq = 1;
zone.len = logical_to_sectors(sdp, get_unaligned_be64(&buf[8]));
zone.capacity = zone.len;
zone.start = logical_to_sectors(sdp, get_unaligned_be64(&buf[16]));
zone.wp = logical_to_sectors(sdp, get_unaligned_be64(&buf[24]));
if (zone.type != ZBC_ZONE_TYPE_CONV &&
zone.cond == ZBC_ZONE_COND_FULL)
zone.wp = zone.start + zone.len;
ret = cb(&zone, idx, data);
if (ret)
return ret;
if (sdkp->rev_wp_offset)
sdkp->rev_wp_offset[idx] = sd_zbc_get_zone_wp_offset(&zone);
return 0;
}
/**
* sd_zbc_do_report_zones - Issue a REPORT ZONES scsi command.
* @sdkp: The target disk
* @buf: vmalloc-ed buffer to use for the reply
* @buflen: the buffer size
* @lba: Start LBA of the report
* @partial: Do partial report
*
* For internal use during device validation.
* Using partial=true can significantly speed up execution of a report zones
* command because the disk does not have to count all possible report matching
* zones and will only report the count of zones fitting in the command reply
* buffer.
*/
static int sd_zbc_do_report_zones(struct scsi_disk *sdkp, unsigned char *buf,
unsigned int buflen, sector_t lba,
bool partial)
{
struct scsi_device *sdp = sdkp->device;
const int timeout = sdp->request_queue->rq_timeout;
struct scsi_sense_hdr sshdr;
unsigned char cmd[16];
unsigned int rep_len;
int result;
memset(cmd, 0, 16);
cmd[0] = ZBC_IN;
cmd[1] = ZI_REPORT_ZONES;
put_unaligned_be64(lba, &cmd[2]);
put_unaligned_be32(buflen, &cmd[10]);
if (partial)
cmd[14] = ZBC_REPORT_ZONE_PARTIAL;
result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
buf, buflen, &sshdr,
timeout, SD_MAX_RETRIES, NULL);
if (result) {
sd_printk(KERN_ERR, sdkp,
"REPORT ZONES start lba %llu failed\n", lba);
sd_print_result(sdkp, "REPORT ZONES", result);
if (driver_byte(result) == DRIVER_SENSE &&
scsi_sense_valid(&sshdr))
sd_print_sense_hdr(sdkp, &sshdr);
return -EIO;
}
rep_len = get_unaligned_be32(&buf[0]);
if (rep_len < 64) {
sd_printk(KERN_ERR, sdkp,
"REPORT ZONES report invalid length %u\n",
rep_len);
return -EIO;
}
return 0;
}
/**
* Allocate a buffer for report zones reply.
* @sdkp: The target disk
* @nr_zones: Maximum number of zones to report
* @buflen: Size of the buffer allocated
*
* Try to allocate a reply buffer for the number of requested zones.
* The size of the buffer allocated may be smaller than requested to
* satify the device constraint (max_hw_sectors, max_segments, etc).
*
* Return the address of the allocated buffer and update @buflen with
* the size of the allocated buffer.
*/
static void *sd_zbc_alloc_report_buffer(struct scsi_disk *sdkp,
unsigned int nr_zones, size_t *buflen)
{
struct request_queue *q = sdkp->disk->queue;
size_t bufsize;
void *buf;
/*
* Report zone buffer size should be at most 64B times the number of
* zones requested plus the 64B reply header, but should be at least
* SECTOR_SIZE for ATA devices.
* Make sure that this size does not exceed the hardware capabilities.
* Furthermore, since the report zone command cannot be split, make
* sure that the allocated buffer can always be mapped by limiting the
* number of pages allocated to the HBA max segments limit.
*/
nr_zones = min(nr_zones, sdkp->nr_zones);
bufsize = roundup((nr_zones + 1) * 64, SECTOR_SIZE);
bufsize = min_t(size_t, bufsize,
queue_max_hw_sectors(q) << SECTOR_SHIFT);
bufsize = min_t(size_t, bufsize, queue_max_segments(q) << PAGE_SHIFT);
while (bufsize >= SECTOR_SIZE) {
buf = __vmalloc(bufsize,
GFP_KERNEL | __GFP_ZERO | __GFP_NORETRY);
if (buf) {
*buflen = bufsize;
return buf;
}
bufsize >>= 1;
}
return NULL;
}
/**
* sd_zbc_zone_sectors - Get the device zone size in number of 512B sectors.
* @sdkp: The target disk
*/
static inline sector_t sd_zbc_zone_sectors(struct scsi_disk *sdkp)
{
return logical_to_sectors(sdkp->device, sdkp->zone_blocks);
}
int sd_zbc_report_zones(struct gendisk *disk, sector_t sector,
unsigned int nr_zones, report_zones_cb cb, void *data)
{
struct scsi_disk *sdkp = scsi_disk(disk);
sector_t capacity = logical_to_sectors(sdkp->device, sdkp->capacity);
unsigned int nr, i;
unsigned char *buf;
size_t offset, buflen = 0;
int zone_idx = 0;
int ret;
if (!sd_is_zoned(sdkp))
/* Not a zoned device */
return -EOPNOTSUPP;
if (!capacity)
/* Device gone or invalid */
return -ENODEV;
buf = sd_zbc_alloc_report_buffer(sdkp, nr_zones, &buflen);
if (!buf)
return -ENOMEM;
while (zone_idx < nr_zones && sector < capacity) {
ret = sd_zbc_do_report_zones(sdkp, buf, buflen,
sectors_to_logical(sdkp->device, sector), true);
if (ret)
goto out;
offset = 0;
nr = min(nr_zones, get_unaligned_be32(&buf[0]) / 64);
if (!nr)
break;
for (i = 0; i < nr && zone_idx < nr_zones; i++) {
offset += 64;
ret = sd_zbc_parse_report(sdkp, buf + offset, zone_idx,
cb, data);
if (ret)
goto out;
zone_idx++;
}
sector += sd_zbc_zone_sectors(sdkp) * i;
}
ret = zone_idx;
out:
kvfree(buf);
return ret;
}
static blk_status_t sd_zbc_cmnd_checks(struct scsi_cmnd *cmd)
{
struct request *rq = cmd->request;
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
sector_t sector = blk_rq_pos(rq);
if (!sd_is_zoned(sdkp))
/* Not a zoned device */
return BLK_STS_IOERR;
if (sdkp->device->changed)
return BLK_STS_IOERR;
if (sector & (sd_zbc_zone_sectors(sdkp) - 1))
/* Unaligned request */
return BLK_STS_IOERR;
return BLK_STS_OK;
}
#define SD_ZBC_INVALID_WP_OFST (~0u)
#define SD_ZBC_UPDATING_WP_OFST (SD_ZBC_INVALID_WP_OFST - 1)
static int sd_zbc_update_wp_offset_cb(struct blk_zone *zone, unsigned int idx,
void *data)
{
struct scsi_disk *sdkp = data;
lockdep_assert_held(&sdkp->zones_wp_offset_lock);
sdkp->zones_wp_offset[idx] = sd_zbc_get_zone_wp_offset(zone);
return 0;
}
static void sd_zbc_update_wp_offset_workfn(struct work_struct *work)
{
struct scsi_disk *sdkp;
unsigned int zno;
int ret;
sdkp = container_of(work, struct scsi_disk, zone_wp_offset_work);
spin_lock_bh(&sdkp->zones_wp_offset_lock);
for (zno = 0; zno < sdkp->nr_zones; zno++) {
if (sdkp->zones_wp_offset[zno] != SD_ZBC_UPDATING_WP_OFST)
continue;
spin_unlock_bh(&sdkp->zones_wp_offset_lock);
ret = sd_zbc_do_report_zones(sdkp, sdkp->zone_wp_update_buf,
SD_BUF_SIZE,
zno * sdkp->zone_blocks, true);
spin_lock_bh(&sdkp->zones_wp_offset_lock);
if (!ret)
sd_zbc_parse_report(sdkp, sdkp->zone_wp_update_buf + 64,
zno, sd_zbc_update_wp_offset_cb,
sdkp);
}
spin_unlock_bh(&sdkp->zones_wp_offset_lock);
scsi_device_put(sdkp->device);
}
/**
* sd_zbc_prepare_zone_append() - Prepare an emulated ZONE_APPEND command.
* @cmd: the command to setup
* @lba: the LBA to patch
* @nr_blocks: the number of LBAs to be written
*
* Called from sd_setup_read_write_cmnd() for REQ_OP_ZONE_APPEND.
* @sd_zbc_prepare_zone_append() handles the necessary zone wrote locking and
* patching of the lba for an emulated ZONE_APPEND command.
*
* In case the cached write pointer offset is %SD_ZBC_INVALID_WP_OFST it will
* schedule a REPORT ZONES command and return BLK_STS_IOERR.
*/
blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd, sector_t *lba,
unsigned int nr_blocks)
{
struct request *rq = cmd->request;
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
unsigned int wp_offset, zno = blk_rq_zone_no(rq);
blk_status_t ret;
ret = sd_zbc_cmnd_checks(cmd);
if (ret != BLK_STS_OK)
return ret;
if (!blk_rq_zone_is_seq(rq))
return BLK_STS_IOERR;
/* Unlock of the write lock will happen in sd_zbc_complete() */
if (!blk_req_zone_write_trylock(rq))
return BLK_STS_ZONE_RESOURCE;
spin_lock_bh(&sdkp->zones_wp_offset_lock);
wp_offset = sdkp->zones_wp_offset[zno];
switch (wp_offset) {
case SD_ZBC_INVALID_WP_OFST:
/*
* We are about to schedule work to update a zone write pointer
* offset, which will cause the zone append command to be
* requeued. So make sure that the scsi device does not go away
* while the work is being processed.
*/
if (scsi_device_get(sdkp->device)) {
ret = BLK_STS_IOERR;
break;
}
sdkp->zones_wp_offset[zno] = SD_ZBC_UPDATING_WP_OFST;
schedule_work(&sdkp->zone_wp_offset_work);
fallthrough;
case SD_ZBC_UPDATING_WP_OFST:
ret = BLK_STS_DEV_RESOURCE;
break;
default:
wp_offset = sectors_to_logical(sdkp->device, wp_offset);
if (wp_offset + nr_blocks > sdkp->zone_blocks) {
ret = BLK_STS_IOERR;
break;
}
*lba += wp_offset;
}
spin_unlock_bh(&sdkp->zones_wp_offset_lock);
if (ret)
blk_req_zone_write_unlock(rq);
return ret;
}
/**
* sd_zbc_setup_zone_mgmt_cmnd - Prepare a zone ZBC_OUT command. The operations
* can be RESET WRITE POINTER, OPEN, CLOSE or FINISH.
* @cmd: the command to setup
* @op: Operation to be performed
* @all: All zones control
*
* Called from sd_init_command() for REQ_OP_ZONE_RESET, REQ_OP_ZONE_RESET_ALL,
* REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE or REQ_OP_ZONE_FINISH requests.
*/
blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
unsigned char op, bool all)
{
struct request *rq = cmd->request;
sector_t sector = blk_rq_pos(rq);
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
sector_t block = sectors_to_logical(sdkp->device, sector);
blk_status_t ret;
ret = sd_zbc_cmnd_checks(cmd);
if (ret != BLK_STS_OK)
return ret;
cmd->cmd_len = 16;
memset(cmd->cmnd, 0, cmd->cmd_len);
cmd->cmnd[0] = ZBC_OUT;
cmd->cmnd[1] = op;
if (all)
cmd->cmnd[14] = 0x1;
else
put_unaligned_be64(block, &cmd->cmnd[2]);
rq->timeout = SD_TIMEOUT;
cmd->sc_data_direction = DMA_NONE;
cmd->transfersize = 0;
cmd->allowed = 0;
return BLK_STS_OK;
}
static bool sd_zbc_need_zone_wp_update(struct request *rq)
{
switch (req_op(rq)) {
case REQ_OP_ZONE_APPEND:
case REQ_OP_ZONE_FINISH:
case REQ_OP_ZONE_RESET:
case REQ_OP_ZONE_RESET_ALL:
return true;
case REQ_OP_WRITE:
case REQ_OP_WRITE_ZEROES:
case REQ_OP_WRITE_SAME:
return blk_rq_zone_is_seq(rq);
default:
return false;
}
}
/**
* sd_zbc_zone_wp_update - Update cached zone write pointer upon cmd completion
* @cmd: Completed command
* @good_bytes: Command reply bytes
*
* Called from sd_zbc_complete() to handle the update of the cached zone write
* pointer value in case an update is needed.
*/
static unsigned int sd_zbc_zone_wp_update(struct scsi_cmnd *cmd,
unsigned int good_bytes)
{
int result = cmd->result;
struct request *rq = cmd->request;
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
unsigned int zno = blk_rq_zone_no(rq);
enum req_opf op = req_op(rq);
/*
* If we got an error for a command that needs updating the write
* pointer offset cache, we must mark the zone wp offset entry as
* invalid to force an update from disk the next time a zone append
* command is issued.
*/
spin_lock_bh(&sdkp->zones_wp_offset_lock);
if (result && op != REQ_OP_ZONE_RESET_ALL) {
if (op == REQ_OP_ZONE_APPEND) {
/* Force complete completion (no retry) */
good_bytes = 0;
scsi_set_resid(cmd, blk_rq_bytes(rq));
}
/*
* Force an update of the zone write pointer offset on
* the next zone append access.
*/
if (sdkp->zones_wp_offset[zno] != SD_ZBC_UPDATING_WP_OFST)
sdkp->zones_wp_offset[zno] = SD_ZBC_INVALID_WP_OFST;
goto unlock_wp_offset;
}
switch (op) {
case REQ_OP_ZONE_APPEND:
rq->__sector += sdkp->zones_wp_offset[zno];
fallthrough;
case REQ_OP_WRITE_ZEROES:
case REQ_OP_WRITE_SAME:
case REQ_OP_WRITE:
if (sdkp->zones_wp_offset[zno] < sd_zbc_zone_sectors(sdkp))
sdkp->zones_wp_offset[zno] +=
good_bytes >> SECTOR_SHIFT;
break;
case REQ_OP_ZONE_RESET:
sdkp->zones_wp_offset[zno] = 0;
break;
case REQ_OP_ZONE_FINISH:
sdkp->zones_wp_offset[zno] = sd_zbc_zone_sectors(sdkp);
break;
case REQ_OP_ZONE_RESET_ALL:
memset(sdkp->zones_wp_offset, 0,
sdkp->nr_zones * sizeof(unsigned int));
break;
default:
break;
}
unlock_wp_offset:
spin_unlock_bh(&sdkp->zones_wp_offset_lock);
return good_bytes;
}
/**
* sd_zbc_complete - ZBC command post processing.
* @cmd: Completed command
* @good_bytes: Command reply bytes
* @sshdr: command sense header
*
* Called from sd_done() to handle zone commands errors and updates to the
* device queue zone write pointer offset cahce.
*/
unsigned int sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
struct scsi_sense_hdr *sshdr)
{
int result = cmd->result;
struct request *rq = cmd->request;
if (op_is_zone_mgmt(req_op(rq)) &&
result &&
sshdr->sense_key == ILLEGAL_REQUEST &&
sshdr->asc == 0x24) {
/*
* INVALID FIELD IN CDB error: a zone management command was
* attempted on a conventional zone. Nothing to worry about,
* so be quiet about the error.
*/
rq->rq_flags |= RQF_QUIET;
} else if (sd_zbc_need_zone_wp_update(rq))
good_bytes = sd_zbc_zone_wp_update(cmd, good_bytes);
if (req_op(rq) == REQ_OP_ZONE_APPEND)
blk_req_zone_write_unlock(rq);
return good_bytes;
}
/**
* sd_zbc_check_zoned_characteristics - Check zoned block device characteristics
* @sdkp: Target disk
* @buf: Buffer where to store the VPD page data
*
* Read VPD page B6, get information and check that reads are unconstrained.
*/
static int sd_zbc_check_zoned_characteristics(struct scsi_disk *sdkp,
unsigned char *buf)
{
if (scsi_get_vpd_page(sdkp->device, 0xb6, buf, 64)) {
sd_printk(KERN_NOTICE, sdkp,
"Read zoned characteristics VPD page failed\n");
return -ENODEV;
}
if (sdkp->device->type != TYPE_ZBC) {
/* Host-aware */
sdkp->urswrz = 1;
sdkp->zones_optimal_open = get_unaligned_be32(&buf[8]);
sdkp->zones_optimal_nonseq = get_unaligned_be32(&buf[12]);
sdkp->zones_max_open = 0;
} else {
/* Host-managed */
sdkp->urswrz = buf[4] & 1;
sdkp->zones_optimal_open = 0;
sdkp->zones_optimal_nonseq = 0;
sdkp->zones_max_open = get_unaligned_be32(&buf[16]);
}
/*
* Check for unconstrained reads: host-managed devices with
* constrained reads (drives failing read after write pointer)
* are not supported.
*/
if (!sdkp->urswrz) {
if (sdkp->first_scan)
sd_printk(KERN_NOTICE, sdkp,
"constrained reads devices are not supported\n");
return -ENODEV;
}
return 0;
}
/**
* sd_zbc_check_capacity - Check the device capacity
* @sdkp: Target disk
* @buf: command buffer
* @zblocks: zone size in number of blocks
*
* Get the device zone size and check that the device capacity as reported
* by READ CAPACITY matches the max_lba value (plus one) of the report zones
* command reply for devices with RC_BASIS == 0.
*
* Returns 0 upon success or an error code upon failure.
*/
static int sd_zbc_check_capacity(struct scsi_disk *sdkp, unsigned char *buf,
u32 *zblocks)
{
u64 zone_blocks;
sector_t max_lba;
unsigned char *rec;
int ret;
/* Do a report zone to get max_lba and the size of the first zone */
ret = sd_zbc_do_report_zones(sdkp, buf, SD_BUF_SIZE, 0, false);
if (ret)
return ret;
if (sdkp->rc_basis == 0) {
/* The max_lba field is the capacity of this device */
max_lba = get_unaligned_be64(&buf[8]);
if (sdkp->capacity != max_lba + 1) {
if (sdkp->first_scan)
sd_printk(KERN_WARNING, sdkp,
"Changing capacity from %llu to max LBA+1 %llu\n",
(unsigned long long)sdkp->capacity,
(unsigned long long)max_lba + 1);
sdkp->capacity = max_lba + 1;
}
}
/* Get the size of the first reported zone */
rec = buf + 64;
zone_blocks = get_unaligned_be64(&rec[8]);
if (logical_to_sectors(sdkp->device, zone_blocks) > UINT_MAX) {
if (sdkp->first_scan)
sd_printk(KERN_NOTICE, sdkp,
"Zone size too large\n");
return -EFBIG;
}
*zblocks = zone_blocks;
return 0;
}
static void sd_zbc_print_zones(struct scsi_disk *sdkp)
{
if (!sd_is_zoned(sdkp) || !sdkp->capacity)
return;
if (sdkp->capacity & (sdkp->zone_blocks - 1))
sd_printk(KERN_NOTICE, sdkp,
"%u zones of %u logical blocks + 1 runt zone\n",
sdkp->nr_zones - 1,
sdkp->zone_blocks);
else
sd_printk(KERN_NOTICE, sdkp,
"%u zones of %u logical blocks\n",
sdkp->nr_zones,
sdkp->zone_blocks);
}
static int sd_zbc_init_disk(struct scsi_disk *sdkp)
{
sdkp->zones_wp_offset = NULL;
spin_lock_init(&sdkp->zones_wp_offset_lock);
sdkp->rev_wp_offset = NULL;
mutex_init(&sdkp->rev_mutex);
INIT_WORK(&sdkp->zone_wp_offset_work, sd_zbc_update_wp_offset_workfn);
sdkp->zone_wp_update_buf = kzalloc(SD_BUF_SIZE, GFP_KERNEL);
if (!sdkp->zone_wp_update_buf)
return -ENOMEM;
return 0;
}
void sd_zbc_release_disk(struct scsi_disk *sdkp)
{
kvfree(sdkp->zones_wp_offset);
sdkp->zones_wp_offset = NULL;
kfree(sdkp->zone_wp_update_buf);
sdkp->zone_wp_update_buf = NULL;
}
static void sd_zbc_revalidate_zones_cb(struct gendisk *disk)
{
struct scsi_disk *sdkp = scsi_disk(disk);
swap(sdkp->zones_wp_offset, sdkp->rev_wp_offset);
}
int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
{
struct gendisk *disk = sdkp->disk;
struct request_queue *q = disk->queue;
u32 zone_blocks = sdkp->rev_zone_blocks;
unsigned int nr_zones = sdkp->rev_nr_zones;
u32 max_append;
int ret = 0;
unsigned int flags;
/*
* For all zoned disks, initialize zone append emulation data if not
* already done. This is necessary also for host-aware disks used as
* regular disks due to the presence of partitions as these partitions
* may be deleted and the disk zoned model changed back from
* BLK_ZONED_NONE to BLK_ZONED_HA.
*/
if (sd_is_zoned(sdkp) && !sdkp->zone_wp_update_buf) {
ret = sd_zbc_init_disk(sdkp);
if (ret)
return ret;
}
/*
* There is nothing to do for regular disks, including host-aware disks
* that have partitions.
*/
if (!blk_queue_is_zoned(q))
return 0;
/*
* Make sure revalidate zones are serialized to ensure exclusive
* updates of the scsi disk data.
*/
mutex_lock(&sdkp->rev_mutex);
if (sdkp->zone_blocks == zone_blocks &&
sdkp->nr_zones == nr_zones &&
disk->queue->nr_zones == nr_zones)
goto unlock;
flags = memalloc_noio_save();
sdkp->zone_blocks = zone_blocks;
sdkp->nr_zones = nr_zones;
sdkp->rev_wp_offset = kvcalloc(nr_zones, sizeof(u32), GFP_KERNEL);
if (!sdkp->rev_wp_offset) {
ret = -ENOMEM;
memalloc_noio_restore(flags);
goto unlock;
}
ret = blk_revalidate_disk_zones(disk, sd_zbc_revalidate_zones_cb);
memalloc_noio_restore(flags);
kvfree(sdkp->rev_wp_offset);
sdkp->rev_wp_offset = NULL;
if (ret) {
sdkp->zone_blocks = 0;
sdkp->nr_zones = 0;
sdkp->capacity = 0;
goto unlock;
}
max_append = min_t(u32, logical_to_sectors(sdkp->device, zone_blocks),
q->limits.max_segments << (PAGE_SHIFT - 9));
max_append = min_t(u32, max_append, queue_max_hw_sectors(q));
blk_queue_max_zone_append_sectors(q, max_append);
sd_zbc_print_zones(sdkp);
unlock:
mutex_unlock(&sdkp->rev_mutex);
return ret;
}
int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf)
{
struct gendisk *disk = sdkp->disk;
struct request_queue *q = disk->queue;
unsigned int nr_zones;
u32 zone_blocks = 0;
int ret;
if (!sd_is_zoned(sdkp))
/*
* Device managed or normal SCSI disk,
* no special handling required
*/
return 0;
/* Check zoned block device characteristics (unconstrained reads) */
ret = sd_zbc_check_zoned_characteristics(sdkp, buf);
if (ret)
goto err;
/* Check the device capacity reported by report zones */
ret = sd_zbc_check_capacity(sdkp, buf, &zone_blocks);
if (ret != 0)
goto err;
/* The drive satisfies the kernel restrictions: set it up */
blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
blk_queue_required_elevator_features(q, ELEVATOR_F_ZBD_SEQ_WRITE);
if (sdkp->zones_max_open == U32_MAX)
blk_queue_max_open_zones(q, 0);
else
blk_queue_max_open_zones(q, sdkp->zones_max_open);
blk_queue_max_active_zones(q, 0);
nr_zones = round_up(sdkp->capacity, zone_blocks) >> ilog2(zone_blocks);
/* READ16/WRITE16 is mandatory for ZBC disks */
sdkp->device->use_16_for_rw = 1;
sdkp->device->use_10_for_rw = 0;
sdkp->rev_nr_zones = nr_zones;
sdkp->rev_zone_blocks = zone_blocks;
return 0;
err:
sdkp->capacity = 0;
return ret;
}