linux_dsm_epyc7002/drivers/gnss/serial.c
Johan Hovold 0bbf0a88fa serdev: make synchronous write return bytes written
Make the synchronous serdev_device_write() helper behave analogous to
the asynchronous serdev_device_write_buf() by returning the number of
bytes written (or rather buffered) also on timeout.

This will allow drivers to distinguish the case where data was partially
written from the case where no data was written.

Also update the only two users that checked the return value.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27 19:44:21 +01:00

277 lines
6.2 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Generic serial GNSS receiver driver
*
* Copyright (C) 2018 Johan Hovold <johan@kernel.org>
*/
#include <linux/errno.h>
#include <linux/gnss.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/sched.h>
#include <linux/serdev.h>
#include <linux/slab.h>
#include "serial.h"
static int gnss_serial_open(struct gnss_device *gdev)
{
struct gnss_serial *gserial = gnss_get_drvdata(gdev);
struct serdev_device *serdev = gserial->serdev;
int ret;
ret = serdev_device_open(serdev);
if (ret)
return ret;
serdev_device_set_baudrate(serdev, gserial->speed);
serdev_device_set_flow_control(serdev, false);
ret = pm_runtime_get_sync(&serdev->dev);
if (ret < 0) {
pm_runtime_put_noidle(&serdev->dev);
goto err_close;
}
return 0;
err_close:
serdev_device_close(serdev);
return ret;
}
static void gnss_serial_close(struct gnss_device *gdev)
{
struct gnss_serial *gserial = gnss_get_drvdata(gdev);
struct serdev_device *serdev = gserial->serdev;
serdev_device_close(serdev);
pm_runtime_put(&serdev->dev);
}
static int gnss_serial_write_raw(struct gnss_device *gdev,
const unsigned char *buf, size_t count)
{
struct gnss_serial *gserial = gnss_get_drvdata(gdev);
struct serdev_device *serdev = gserial->serdev;
int ret;
/* write is only buffered synchronously */
ret = serdev_device_write(serdev, buf, count, MAX_SCHEDULE_TIMEOUT);
if (ret < 0 || ret < count)
return ret;
/* FIXME: determine if interrupted? */
serdev_device_wait_until_sent(serdev, 0);
return count;
}
static const struct gnss_operations gnss_serial_gnss_ops = {
.open = gnss_serial_open,
.close = gnss_serial_close,
.write_raw = gnss_serial_write_raw,
};
static int gnss_serial_receive_buf(struct serdev_device *serdev,
const unsigned char *buf, size_t count)
{
struct gnss_serial *gserial = serdev_device_get_drvdata(serdev);
struct gnss_device *gdev = gserial->gdev;
return gnss_insert_raw(gdev, buf, count);
}
static const struct serdev_device_ops gnss_serial_serdev_ops = {
.receive_buf = gnss_serial_receive_buf,
.write_wakeup = serdev_device_write_wakeup,
};
static int gnss_serial_set_power(struct gnss_serial *gserial,
enum gnss_serial_pm_state state)
{
if (!gserial->ops || !gserial->ops->set_power)
return 0;
return gserial->ops->set_power(gserial, state);
}
/*
* FIXME: need to provide subdriver defaults or separate dt parsing from
* allocation.
*/
static int gnss_serial_parse_dt(struct serdev_device *serdev)
{
struct gnss_serial *gserial = serdev_device_get_drvdata(serdev);
struct device_node *node = serdev->dev.of_node;
u32 speed = 4800;
of_property_read_u32(node, "current-speed", &speed);
gserial->speed = speed;
return 0;
}
struct gnss_serial *gnss_serial_allocate(struct serdev_device *serdev,
size_t data_size)
{
struct gnss_serial *gserial;
struct gnss_device *gdev;
int ret;
gserial = kzalloc(sizeof(*gserial) + data_size, GFP_KERNEL);
if (!gserial)
return ERR_PTR(-ENOMEM);
gdev = gnss_allocate_device(&serdev->dev);
if (!gdev) {
ret = -ENOMEM;
goto err_free_gserial;
}
gdev->ops = &gnss_serial_gnss_ops;
gnss_set_drvdata(gdev, gserial);
gserial->serdev = serdev;
gserial->gdev = gdev;
serdev_device_set_drvdata(serdev, gserial);
serdev_device_set_client_ops(serdev, &gnss_serial_serdev_ops);
ret = gnss_serial_parse_dt(serdev);
if (ret)
goto err_put_device;
return gserial;
err_put_device:
gnss_put_device(gserial->gdev);
err_free_gserial:
kfree(gserial);
return ERR_PTR(ret);
}
EXPORT_SYMBOL_GPL(gnss_serial_allocate);
void gnss_serial_free(struct gnss_serial *gserial)
{
gnss_put_device(gserial->gdev);
kfree(gserial);
};
EXPORT_SYMBOL_GPL(gnss_serial_free);
int gnss_serial_register(struct gnss_serial *gserial)
{
struct serdev_device *serdev = gserial->serdev;
int ret;
if (IS_ENABLED(CONFIG_PM)) {
pm_runtime_enable(&serdev->dev);
} else {
ret = gnss_serial_set_power(gserial, GNSS_SERIAL_ACTIVE);
if (ret < 0)
return ret;
}
ret = gnss_register_device(gserial->gdev);
if (ret)
goto err_disable_rpm;
return 0;
err_disable_rpm:
if (IS_ENABLED(CONFIG_PM))
pm_runtime_disable(&serdev->dev);
else
gnss_serial_set_power(gserial, GNSS_SERIAL_OFF);
return ret;
}
EXPORT_SYMBOL_GPL(gnss_serial_register);
void gnss_serial_deregister(struct gnss_serial *gserial)
{
struct serdev_device *serdev = gserial->serdev;
gnss_deregister_device(gserial->gdev);
if (IS_ENABLED(CONFIG_PM))
pm_runtime_disable(&serdev->dev);
else
gnss_serial_set_power(gserial, GNSS_SERIAL_OFF);
}
EXPORT_SYMBOL_GPL(gnss_serial_deregister);
#ifdef CONFIG_PM
static int gnss_serial_runtime_suspend(struct device *dev)
{
struct gnss_serial *gserial = dev_get_drvdata(dev);
return gnss_serial_set_power(gserial, GNSS_SERIAL_STANDBY);
}
static int gnss_serial_runtime_resume(struct device *dev)
{
struct gnss_serial *gserial = dev_get_drvdata(dev);
return gnss_serial_set_power(gserial, GNSS_SERIAL_ACTIVE);
}
#endif /* CONFIG_PM */
static int gnss_serial_prepare(struct device *dev)
{
if (pm_runtime_suspended(dev))
return 1;
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int gnss_serial_suspend(struct device *dev)
{
struct gnss_serial *gserial = dev_get_drvdata(dev);
int ret = 0;
/*
* FIXME: serdev currently lacks support for managing the underlying
* device's wakeup settings. A workaround would be to close the serdev
* device here if it is open.
*/
if (!pm_runtime_suspended(dev))
ret = gnss_serial_set_power(gserial, GNSS_SERIAL_STANDBY);
return ret;
}
static int gnss_serial_resume(struct device *dev)
{
struct gnss_serial *gserial = dev_get_drvdata(dev);
int ret = 0;
if (!pm_runtime_suspended(dev))
ret = gnss_serial_set_power(gserial, GNSS_SERIAL_ACTIVE);
return ret;
}
#endif /* CONFIG_PM_SLEEP */
const struct dev_pm_ops gnss_serial_pm_ops = {
.prepare = gnss_serial_prepare,
SET_SYSTEM_SLEEP_PM_OPS(gnss_serial_suspend, gnss_serial_resume)
SET_RUNTIME_PM_OPS(gnss_serial_runtime_suspend, gnss_serial_runtime_resume, NULL)
};
EXPORT_SYMBOL_GPL(gnss_serial_pm_ops);
MODULE_AUTHOR("Johan Hovold <johan@kernel.org>");
MODULE_DESCRIPTION("Generic serial GNSS receiver driver");
MODULE_LICENSE("GPL v2");