linux_dsm_epyc7002/drivers/clocksource/timer-nps.c
Daniel Lezcano 1727339590 clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE
The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the
clocksource at early stage. However, this macro is also used to initialize
the clockevent if any, or the clockevent only.

It was originally suggested to declare another macro to initialize a
clockevent, so in order to separate the two entities even they belong to the
same IP. This was not accepted because of the impact on the DT where splitting
a clocksource/clockevent definition does not make sense as it is a Linux
concept not a hardware description.

On the other side, the clocksource has not interrupt declared while the
clockevent has, so it is easy from the driver to know if the description is
for a clockevent or a clocksource, IOW it could be implemented at the driver
level.

So instead of dealing with a named clocksource macro, let's use a more generic
one: TIMER_OF_DECLARE.

The patch has not functional changes.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14 11:58:45 +02:00

285 lines
7.4 KiB
C

/*
* Copyright (c) 2016, Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/interrupt.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/cpu.h>
#include <soc/nps/common.h>
#define NPS_MSU_TICK_LOW 0xC8
#define NPS_CLUSTER_OFFSET 8
#define NPS_CLUSTER_NUM 16
/* This array is per cluster of CPUs (Each NPS400 cluster got 256 CPUs) */
static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
static int __init nps_get_timer_clk(struct device_node *node,
unsigned long *timer_freq,
struct clk **clk)
{
int ret;
*clk = of_clk_get(node, 0);
ret = PTR_ERR_OR_ZERO(*clk);
if (ret) {
pr_err("timer missing clk\n");
return ret;
}
ret = clk_prepare_enable(*clk);
if (ret) {
pr_err("Couldn't enable parent clk\n");
clk_put(*clk);
return ret;
}
*timer_freq = clk_get_rate(*clk);
if (!(*timer_freq)) {
pr_err("Couldn't get clk rate\n");
clk_disable_unprepare(*clk);
clk_put(*clk);
return -EINVAL;
}
return 0;
}
static u64 nps_clksrc_read(struct clocksource *clksrc)
{
int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
return (u64)ioread32be(nps_msu_reg_low_addr[cluster]);
}
static int __init nps_setup_clocksource(struct device_node *node)
{
int ret, cluster;
struct clk *clk;
unsigned long nps_timer1_freq;
for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
nps_msu_reg_low_addr[cluster] =
nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
ret = nps_get_timer_clk(node, &nps_timer1_freq, &clk);
if (ret)
return ret;
ret = clocksource_mmio_init(nps_msu_reg_low_addr, "nps-tick",
nps_timer1_freq, 300, 32, nps_clksrc_read);
if (ret) {
pr_err("Couldn't register clock source.\n");
clk_disable_unprepare(clk);
}
return ret;
}
TIMER_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
nps_setup_clocksource);
TIMER_OF_DECLARE(ezchip_nps400_clk_src, "ezchip,nps400-timer1",
nps_setup_clocksource);
#ifdef CONFIG_EZNPS_MTM_EXT
#include <soc/nps/mtm.h>
/* Timer related Aux registers */
#define NPS_REG_TIMER0_TSI 0xFFFFF850
#define NPS_REG_TIMER0_LIMIT 0x23
#define NPS_REG_TIMER0_CTRL 0x22
#define NPS_REG_TIMER0_CNT 0x21
/*
* Interrupt Enabled (IE) - re-arm the timer
* Not Halted (NH) - is cleared when working with JTAG (for debug)
*/
#define TIMER0_CTRL_IE BIT(0)
#define TIMER0_CTRL_NH BIT(1)
static unsigned long nps_timer0_freq;
static unsigned long nps_timer0_irq;
static void nps_clkevent_rm_thread(void)
{
int thread;
unsigned int cflags, enabled_threads;
hw_schd_save(&cflags);
enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
/* remove thread from TSI1 */
thread = read_aux_reg(CTOP_AUX_THREAD_ID);
enabled_threads &= ~(1 << thread);
write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
/* Acknowledge and if needed re-arm the timer */
if (!enabled_threads)
write_aux_reg(NPS_REG_TIMER0_CTRL, TIMER0_CTRL_NH);
else
write_aux_reg(NPS_REG_TIMER0_CTRL,
TIMER0_CTRL_IE | TIMER0_CTRL_NH);
hw_schd_restore(cflags);
}
static void nps_clkevent_add_thread(unsigned long delta)
{
int thread;
unsigned int cflags, enabled_threads;
hw_schd_save(&cflags);
/* add thread to TSI1 */
thread = read_aux_reg(CTOP_AUX_THREAD_ID);
enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
enabled_threads |= (1 << thread);
write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
/* set next timer event */
write_aux_reg(NPS_REG_TIMER0_LIMIT, delta);
write_aux_reg(NPS_REG_TIMER0_CNT, 0);
write_aux_reg(NPS_REG_TIMER0_CTRL,
TIMER0_CTRL_IE | TIMER0_CTRL_NH);
hw_schd_restore(cflags);
}
/*
* Whenever anyone tries to change modes, we just mask interrupts
* and wait for the next event to get set.
*/
static int nps_clkevent_set_state(struct clock_event_device *dev)
{
nps_clkevent_rm_thread();
disable_percpu_irq(nps_timer0_irq);
return 0;
}
static int nps_clkevent_set_next_event(unsigned long delta,
struct clock_event_device *dev)
{
nps_clkevent_add_thread(delta);
enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
return 0;
}
static DEFINE_PER_CPU(struct clock_event_device, nps_clockevent_device) = {
.name = "NPS Timer0",
.features = CLOCK_EVT_FEAT_ONESHOT,
.rating = 300,
.set_next_event = nps_clkevent_set_next_event,
.set_state_oneshot = nps_clkevent_set_state,
.set_state_oneshot_stopped = nps_clkevent_set_state,
.set_state_shutdown = nps_clkevent_set_state,
.tick_resume = nps_clkevent_set_state,
};
static irqreturn_t timer_irq_handler(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
nps_clkevent_rm_thread();
evt->event_handler(evt);
return IRQ_HANDLED;
}
static int nps_timer_starting_cpu(unsigned int cpu)
{
struct clock_event_device *evt = this_cpu_ptr(&nps_clockevent_device);
evt->cpumask = cpumask_of(smp_processor_id());
clockevents_config_and_register(evt, nps_timer0_freq, 0, ULONG_MAX);
enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
return 0;
}
static int nps_timer_dying_cpu(unsigned int cpu)
{
disable_percpu_irq(nps_timer0_irq);
return 0;
}
static int __init nps_setup_clockevent(struct device_node *node)
{
struct clk *clk;
int ret;
nps_timer0_irq = irq_of_parse_and_map(node, 0);
if (nps_timer0_irq <= 0) {
pr_err("clockevent: missing irq\n");
return -EINVAL;
}
ret = nps_get_timer_clk(node, &nps_timer0_freq, &clk);
if (ret)
return ret;
/* Needs apriori irq_set_percpu_devid() done in intc map function */
ret = request_percpu_irq(nps_timer0_irq, timer_irq_handler,
"Timer0 (per-cpu-tick)",
&nps_clockevent_device);
if (ret) {
pr_err("Couldn't request irq\n");
clk_disable_unprepare(clk);
return ret;
}
ret = cpuhp_setup_state(CPUHP_AP_ARC_TIMER_STARTING,
"clockevents/nps:starting",
nps_timer_starting_cpu,
nps_timer_dying_cpu);
if (ret) {
pr_err("Failed to setup hotplug state\n");
clk_disable_unprepare(clk);
free_percpu_irq(nps_timer0_irq, &nps_clockevent_device);
return ret;
}
return 0;
}
TIMER_OF_DECLARE(ezchip_nps400_clk_evt, "ezchip,nps400-timer0",
nps_setup_clockevent);
#endif /* CONFIG_EZNPS_MTM_EXT */