linux_dsm_epyc7002/drivers/clocksource/dw_apb_timer_of.c
Serge Semin 6d2e16a318 clocksource: dw_apb_timer_of: Fix missing clockevent timers
Commit 1002148899 ("clocksource: dw_apb_timer_of: use
clocksource_of_init") replaced a publicly available driver
initialization method with one called by the timer_probe() method
available after CLKSRC_OF. In current implementation it traverses
all the timers available in the system and calls their initialization
methods if corresponding devices were either in dtb or in acpi. But
if before the commit any number of available timers would be installed
as clockevent and clocksource devices, after that there would be at most
two. The rest are just ignored since default case branch doesn't do
anything. I don't see a reason of such behaviour, neither the commit
message explains it. Moreover this might be wrong if on some platforms
these timers might be used for different purpose, as virtually CPU-local
clockevent timers and as an independent broadcast timer. So in order
to keep the compatibility with the platforms where the order of the
timers detection has some meaning, lets add the secondly discovered
timer to be of clocksource/sched_clock type, while the very first and
the others would provide the clockevents service.

Fixes: 1002148899 ("clocksource: dw_apb_timer_of: use clocksource_of_init")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-7-Sergey.Semin@baikalelectronics.ru
2020-05-23 00:02:59 +02:00

173 lines
4.2 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Altera Corporation
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* Modified from mach-picoxcell/time.c
*/
#include <linux/delay.h>
#include <linux/dw_apb_timer.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/clk.h>
#include <linux/reset.h>
#include <linux/sched_clock.h>
static void __init timer_get_base_and_rate(struct device_node *np,
void __iomem **base, u32 *rate)
{
struct clk *timer_clk;
struct clk *pclk;
struct reset_control *rstc;
*base = of_iomap(np, 0);
if (!*base)
panic("Unable to map regs for %pOFn", np);
/*
* Reset the timer if the reset control is available, wiping
* out the state the firmware may have left it
*/
rstc = of_reset_control_get(np, NULL);
if (!IS_ERR(rstc)) {
reset_control_assert(rstc);
reset_control_deassert(rstc);
}
/*
* Not all implementations use a periphal clock, so don't panic
* if it's not present
*/
pclk = of_clk_get_by_name(np, "pclk");
if (!IS_ERR(pclk))
if (clk_prepare_enable(pclk))
pr_warn("pclk for %pOFn is present, but could not be activated\n",
np);
timer_clk = of_clk_get_by_name(np, "timer");
if (IS_ERR(timer_clk))
goto try_clock_freq;
if (!clk_prepare_enable(timer_clk)) {
*rate = clk_get_rate(timer_clk);
return;
}
try_clock_freq:
if (of_property_read_u32(np, "clock-freq", rate) &&
of_property_read_u32(np, "clock-frequency", rate))
panic("No clock nor clock-frequency property for %pOFn", np);
}
static void __init add_clockevent(struct device_node *event_timer)
{
void __iomem *iobase;
struct dw_apb_clock_event_device *ced;
u32 irq, rate;
irq = irq_of_parse_and_map(event_timer, 0);
if (irq == 0)
panic("No IRQ for clock event timer");
timer_get_base_and_rate(event_timer, &iobase, &rate);
ced = dw_apb_clockevent_init(-1, event_timer->name, 300, iobase, irq,
rate);
if (!ced)
panic("Unable to initialise clockevent device");
dw_apb_clockevent_register(ced);
}
static void __iomem *sched_io_base;
static u32 sched_rate;
static void __init add_clocksource(struct device_node *source_timer)
{
void __iomem *iobase;
struct dw_apb_clocksource *cs;
u32 rate;
timer_get_base_and_rate(source_timer, &iobase, &rate);
cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
if (!cs)
panic("Unable to initialise clocksource device");
dw_apb_clocksource_start(cs);
dw_apb_clocksource_register(cs);
/*
* Fallback to use the clocksource as sched_clock if no separate
* timer is found. sched_io_base then points to the current_value
* register of the clocksource timer.
*/
sched_io_base = iobase + 0x04;
sched_rate = rate;
}
static u64 notrace read_sched_clock(void)
{
return ~readl_relaxed(sched_io_base);
}
static const struct of_device_id sptimer_ids[] __initconst = {
{ .compatible = "picochip,pc3x2-rtc" },
{ /* Sentinel */ },
};
static void __init init_sched_clock(void)
{
struct device_node *sched_timer;
sched_timer = of_find_matching_node(NULL, sptimer_ids);
if (sched_timer) {
timer_get_base_and_rate(sched_timer, &sched_io_base,
&sched_rate);
of_node_put(sched_timer);
}
sched_clock_register(read_sched_clock, 32, sched_rate);
}
#ifdef CONFIG_ARM
static unsigned long dw_apb_delay_timer_read(void)
{
return ~readl_relaxed(sched_io_base);
}
static struct delay_timer dw_apb_delay_timer = {
.read_current_timer = dw_apb_delay_timer_read,
};
#endif
static int num_called;
static int __init dw_apb_timer_init(struct device_node *timer)
{
switch (num_called) {
case 1:
pr_debug("%s: found clocksource timer\n", __func__);
add_clocksource(timer);
init_sched_clock();
#ifdef CONFIG_ARM
dw_apb_delay_timer.freq = sched_rate;
register_current_timer_delay(&dw_apb_delay_timer);
#endif
break;
default:
pr_debug("%s: found clockevent timer\n", __func__);
add_clockevent(timer);
break;
}
num_called++;
return 0;
}
TIMER_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
TIMER_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init);
TIMER_OF_DECLARE(apb_timer_sp, "snps,dw-apb-timer-sp", dw_apb_timer_init);
TIMER_OF_DECLARE(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init);