mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 00:40:51 +07:00
f5af19889f
commit b43ca511178ed0ab6fd2405df28cf9e100273020 upstream.
struct firmware::data is marked const, and when the firmware is
compressed with xz (default at least with Fedora) it's mapped read-only
which results in a crash:
BUG: unable to handle page fault for address: ffffae57c0ca5047
PGD 100000067 P4D 100000067 PUD 1001ce067 PMD 10165a067 PTE 8000000112bba161
Oops: 0003 [#1] SMP NOPTI
CPU: 3 PID: 204 Comm: kworker/u17:0 Not tainted 5.12.1-test+ #1
Hardware name: Dell Inc. XPS 13 9310/0F7M4C, BIOS 1.2.5 12/10/2020
Workqueue: hci0 hci_power_on [bluetooth]
RIP: 0010:qca_download_firmware+0x27c/0x4e0 [btqca]
Code: 1b 75 04 80 48 0c 01 0f b7 c6 8d 54 02 0c 41 39 d7 0f 8e 62 fe ff ff 48 63 c2 4c 01 e8 0f b7 38 0f b7 70 02 66 83 ff 11 75 d3 <80> 48 0c 80 41 83 fc 03 7e 6e 88 58 0d eb ce 41 0f b6 45 0e 48 8b
RSP: 0018:ffffae57c08dfc68 EFLAGS: 00010246
RAX: ffffae57c0ca503b RBX: 000000000000000e RCX: 0000000000000000
RDX: 0000000000000037 RSI: 0000000000000006 RDI: 0000000000000011
RBP: ffff978d9949e000 R08: ffff978d84ed7540 R09: ffffae57c0ca5000
R10: 000000000010cd00 R11: 0000000000000001 R12: 0000000000000005
R13: ffffae57c0ca5004 R14: ffff978d98ca8680 R15: 00000000000016a9
FS: 0000000000000000(0000) GS:ffff9794ef6c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffae57c0ca5047 CR3: 0000000113d5a004 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
qca_uart_setup+0x2cb/0x1390 [btqca]
? qca_read_soc_version+0x136/0x220 [btqca]
qca_setup+0x288/0xab0 [hci_uart]
hci_dev_do_open+0x1f3/0x780 [bluetooth]
? try_to_wake_up+0x1c1/0x4f0
hci_power_on+0x3f/0x200 [bluetooth]
process_one_work+0x1ec/0x380
worker_thread+0x53/0x3e0
? process_one_work+0x380/0x380
kthread+0x11b/0x140
? kthread_associate_blkcg+0xa0/0xa0
ret_from_fork+0x1f/0x30
Modules linked in: llc ip_set nf_tables nfnetlink snd_soc_skl_hda_dsp(+) ip6table_filter snd_soc_hdac_hdmi ip6_tables qrtr_mhi iptable_filter snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic s>
dell_wmi_sysman(+) dell_smbios snd dcdbas mhi vfat videobuf2_vmalloc i2c_i801 videobuf2_memops videobuf2_v4l2 dell_wmi_descriptor fat wmi_bmof soundcore i2c_smbus videobuf2_common libarc4 mei_me mei hid_se>
i2c_hid_acpi i2c_hid video pinctrl_tigerlake fuse
CR2: ffffae57c0ca5047
This also seems to fix a failure to suspend due to the firmware
download on bootup getting interrupted by the crash:
Bluetooth: hci0: SSR or FW download time out
PM: dpm_run_callback(): acpi_subsys_suspend+0x0/0x60 returns -110
PM: Device serial0-0 failed to suspend: error -110
PM: Some devices failed to suspend, or early wake event detected
Fixes: 83e8196
("Bluetooth: btqca: Introduce generic QCA ROME support")
Cc: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
566 lines
14 KiB
C
566 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Bluetooth supports for Qualcomm Atheros chips
|
|
*
|
|
* Copyright (c) 2015 The Linux Foundation. All rights reserved.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/firmware.h>
|
|
|
|
#include <net/bluetooth/bluetooth.h>
|
|
#include <net/bluetooth/hci_core.h>
|
|
|
|
#include "btqca.h"
|
|
|
|
#define VERSION "0.1"
|
|
|
|
int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
|
|
enum qca_btsoc_type soc_type)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct edl_event_hdr *edl;
|
|
struct qca_btsoc_version *ver;
|
|
char cmd;
|
|
int err = 0;
|
|
u8 event_type = HCI_EV_VENDOR;
|
|
u8 rlen = sizeof(*edl) + sizeof(*ver);
|
|
u8 rtype = EDL_APP_VER_RES_EVT;
|
|
|
|
bt_dev_dbg(hdev, "QCA Version Request");
|
|
|
|
/* Unlike other SoC's sending version command response as payload to
|
|
* VSE event. WCN3991 sends version command response as a payload to
|
|
* command complete event.
|
|
*/
|
|
if (soc_type >= QCA_WCN3991) {
|
|
event_type = 0;
|
|
rlen += 1;
|
|
rtype = EDL_PATCH_VER_REQ_CMD;
|
|
}
|
|
|
|
cmd = EDL_PATCH_VER_REQ_CMD;
|
|
skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
|
|
&cmd, event_type, HCI_INIT_TIMEOUT);
|
|
if (IS_ERR(skb)) {
|
|
err = PTR_ERR(skb);
|
|
bt_dev_err(hdev, "Reading QCA version information failed (%d)",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
if (skb->len != rlen) {
|
|
bt_dev_err(hdev, "QCA Version size mismatch len %d", skb->len);
|
|
err = -EILSEQ;
|
|
goto out;
|
|
}
|
|
|
|
edl = (struct edl_event_hdr *)(skb->data);
|
|
if (!edl) {
|
|
bt_dev_err(hdev, "QCA TLV with no header");
|
|
err = -EILSEQ;
|
|
goto out;
|
|
}
|
|
|
|
if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
|
|
edl->rtype != rtype) {
|
|
bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
|
|
edl->rtype);
|
|
err = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
if (soc_type >= QCA_WCN3991)
|
|
memmove(&edl->data, &edl->data[1], sizeof(*ver));
|
|
|
|
ver = (struct qca_btsoc_version *)(edl->data);
|
|
|
|
bt_dev_info(hdev, "QCA Product ID :0x%08x",
|
|
le32_to_cpu(ver->product_id));
|
|
bt_dev_info(hdev, "QCA SOC Version :0x%08x",
|
|
le32_to_cpu(ver->soc_id));
|
|
bt_dev_info(hdev, "QCA ROM Version :0x%08x",
|
|
le16_to_cpu(ver->rom_ver));
|
|
bt_dev_info(hdev, "QCA Patch Version:0x%08x",
|
|
le16_to_cpu(ver->patch_ver));
|
|
|
|
/* QCA chipset version can be decided by patch and SoC
|
|
* version, combination with upper 2 bytes from SoC
|
|
* and lower 2 bytes from patch will be used.
|
|
*/
|
|
*soc_version = (le32_to_cpu(ver->soc_id) << 16) |
|
|
(le16_to_cpu(ver->rom_ver) & 0x0000ffff);
|
|
if (*soc_version == 0)
|
|
err = -EILSEQ;
|
|
|
|
out:
|
|
kfree_skb(skb);
|
|
if (err)
|
|
bt_dev_err(hdev, "QCA Failed to get version (%d)", err);
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(qca_read_soc_version);
|
|
|
|
static int qca_send_reset(struct hci_dev *hdev)
|
|
{
|
|
struct sk_buff *skb;
|
|
int err;
|
|
|
|
bt_dev_dbg(hdev, "QCA HCI_RESET");
|
|
|
|
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
|
|
if (IS_ERR(skb)) {
|
|
err = PTR_ERR(skb);
|
|
bt_dev_err(hdev, "QCA Reset failed (%d)", err);
|
|
return err;
|
|
}
|
|
|
|
kfree_skb(skb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
|
|
{
|
|
struct sk_buff *skb;
|
|
int err;
|
|
|
|
bt_dev_dbg(hdev, "QCA pre shutdown cmd");
|
|
|
|
skb = __hci_cmd_sync_ev(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
|
|
NULL, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
|
|
|
|
if (IS_ERR(skb)) {
|
|
err = PTR_ERR(skb);
|
|
bt_dev_err(hdev, "QCA preshutdown_cmd failed (%d)", err);
|
|
return err;
|
|
}
|
|
|
|
kfree_skb(skb);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
|
|
|
|
static void qca_tlv_check_data(struct qca_fw_config *config,
|
|
u8 *fw_data, enum qca_btsoc_type soc_type)
|
|
{
|
|
const u8 *data;
|
|
u32 type_len;
|
|
u16 tag_id, tag_len;
|
|
int idx, length;
|
|
struct tlv_type_hdr *tlv;
|
|
struct tlv_type_patch *tlv_patch;
|
|
struct tlv_type_nvm *tlv_nvm;
|
|
uint8_t nvm_baud_rate = config->user_baud_rate;
|
|
|
|
tlv = (struct tlv_type_hdr *)fw_data;
|
|
|
|
type_len = le32_to_cpu(tlv->type_len);
|
|
length = (type_len >> 8) & 0x00ffffff;
|
|
|
|
BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
|
|
BT_DBG("Length\t\t : %d bytes", length);
|
|
|
|
config->dnld_mode = QCA_SKIP_EVT_NONE;
|
|
config->dnld_type = QCA_SKIP_EVT_NONE;
|
|
|
|
switch (config->type) {
|
|
case TLV_TYPE_PATCH:
|
|
tlv_patch = (struct tlv_type_patch *)tlv->data;
|
|
|
|
/* For Rome version 1.1 to 3.1, all segment commands
|
|
* are acked by a vendor specific event (VSE).
|
|
* For Rome >= 3.2, the download mode field indicates
|
|
* if VSE is skipped by the controller.
|
|
* In case VSE is skipped, only the last segment is acked.
|
|
*/
|
|
config->dnld_mode = tlv_patch->download_mode;
|
|
config->dnld_type = config->dnld_mode;
|
|
|
|
BT_DBG("Total Length : %d bytes",
|
|
le32_to_cpu(tlv_patch->total_size));
|
|
BT_DBG("Patch Data Length : %d bytes",
|
|
le32_to_cpu(tlv_patch->data_length));
|
|
BT_DBG("Signing Format Version : 0x%x",
|
|
tlv_patch->format_version);
|
|
BT_DBG("Signature Algorithm : 0x%x",
|
|
tlv_patch->signature);
|
|
BT_DBG("Download mode : 0x%x",
|
|
tlv_patch->download_mode);
|
|
BT_DBG("Reserved : 0x%x",
|
|
tlv_patch->reserved1);
|
|
BT_DBG("Product ID : 0x%04x",
|
|
le16_to_cpu(tlv_patch->product_id));
|
|
BT_DBG("Rom Build Version : 0x%04x",
|
|
le16_to_cpu(tlv_patch->rom_build));
|
|
BT_DBG("Patch Version : 0x%04x",
|
|
le16_to_cpu(tlv_patch->patch_version));
|
|
BT_DBG("Reserved : 0x%x",
|
|
le16_to_cpu(tlv_patch->reserved2));
|
|
BT_DBG("Patch Entry Address : 0x%x",
|
|
le32_to_cpu(tlv_patch->entry));
|
|
break;
|
|
|
|
case TLV_TYPE_NVM:
|
|
idx = 0;
|
|
data = tlv->data;
|
|
while (idx < length) {
|
|
tlv_nvm = (struct tlv_type_nvm *)(data + idx);
|
|
|
|
tag_id = le16_to_cpu(tlv_nvm->tag_id);
|
|
tag_len = le16_to_cpu(tlv_nvm->tag_len);
|
|
|
|
/* Update NVM tags as needed */
|
|
switch (tag_id) {
|
|
case EDL_TAG_ID_HCI:
|
|
/* HCI transport layer parameters
|
|
* enabling software inband sleep
|
|
* onto controller side.
|
|
*/
|
|
tlv_nvm->data[0] |= 0x80;
|
|
|
|
/* UART Baud Rate */
|
|
if (soc_type >= QCA_WCN3991)
|
|
tlv_nvm->data[1] = nvm_baud_rate;
|
|
else
|
|
tlv_nvm->data[2] = nvm_baud_rate;
|
|
|
|
break;
|
|
|
|
case EDL_TAG_ID_DEEP_SLEEP:
|
|
/* Sleep enable mask
|
|
* enabling deep sleep feature on controller.
|
|
*/
|
|
tlv_nvm->data[0] |= 0x01;
|
|
|
|
break;
|
|
}
|
|
|
|
idx += (sizeof(u16) + sizeof(u16) + 8 + tag_len);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
BT_ERR("Unknown TLV type %d", config->type);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
|
|
const u8 *data, enum qca_tlv_dnld_mode mode,
|
|
enum qca_btsoc_type soc_type)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct edl_event_hdr *edl;
|
|
struct tlv_seg_resp *tlv_resp;
|
|
u8 cmd[MAX_SIZE_PER_TLV_SEGMENT + 2];
|
|
int err = 0;
|
|
u8 event_type = HCI_EV_VENDOR;
|
|
u8 rlen = (sizeof(*edl) + sizeof(*tlv_resp));
|
|
u8 rtype = EDL_TVL_DNLD_RES_EVT;
|
|
|
|
cmd[0] = EDL_PATCH_TLV_REQ_CMD;
|
|
cmd[1] = seg_size;
|
|
memcpy(cmd + 2, data, seg_size);
|
|
|
|
if (mode == QCA_SKIP_EVT_VSE_CC || mode == QCA_SKIP_EVT_VSE)
|
|
return __hci_cmd_send(hdev, EDL_PATCH_CMD_OPCODE, seg_size + 2,
|
|
cmd);
|
|
|
|
/* Unlike other SoC's sending version command response as payload to
|
|
* VSE event. WCN3991 sends version command response as a payload to
|
|
* command complete event.
|
|
*/
|
|
if (soc_type >= QCA_WCN3991) {
|
|
event_type = 0;
|
|
rlen = sizeof(*edl);
|
|
rtype = EDL_PATCH_TLV_REQ_CMD;
|
|
}
|
|
|
|
skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, seg_size + 2, cmd,
|
|
event_type, HCI_INIT_TIMEOUT);
|
|
if (IS_ERR(skb)) {
|
|
err = PTR_ERR(skb);
|
|
bt_dev_err(hdev, "QCA Failed to send TLV segment (%d)", err);
|
|
return err;
|
|
}
|
|
|
|
if (skb->len != rlen) {
|
|
bt_dev_err(hdev, "QCA TLV response size mismatch");
|
|
err = -EILSEQ;
|
|
goto out;
|
|
}
|
|
|
|
edl = (struct edl_event_hdr *)(skb->data);
|
|
if (!edl) {
|
|
bt_dev_err(hdev, "TLV with no header");
|
|
err = -EILSEQ;
|
|
goto out;
|
|
}
|
|
|
|
if (edl->cresp != EDL_CMD_REQ_RES_EVT || edl->rtype != rtype) {
|
|
bt_dev_err(hdev, "QCA TLV with error stat 0x%x rtype 0x%x",
|
|
edl->cresp, edl->rtype);
|
|
err = -EIO;
|
|
}
|
|
|
|
if (soc_type >= QCA_WCN3991)
|
|
goto out;
|
|
|
|
tlv_resp = (struct tlv_seg_resp *)(edl->data);
|
|
if (tlv_resp->result) {
|
|
bt_dev_err(hdev, "QCA TLV with error stat 0x%x rtype 0x%x (0x%x)",
|
|
edl->cresp, edl->rtype, tlv_resp->result);
|
|
}
|
|
|
|
out:
|
|
kfree_skb(skb);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int qca_inject_cmd_complete_event(struct hci_dev *hdev)
|
|
{
|
|
struct hci_event_hdr *hdr;
|
|
struct hci_ev_cmd_complete *evt;
|
|
struct sk_buff *skb;
|
|
|
|
skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
|
|
hdr = skb_put(skb, sizeof(*hdr));
|
|
hdr->evt = HCI_EV_CMD_COMPLETE;
|
|
hdr->plen = sizeof(*evt) + 1;
|
|
|
|
evt = skb_put(skb, sizeof(*evt));
|
|
evt->ncmd = 1;
|
|
evt->opcode = cpu_to_le16(QCA_HCI_CC_OPCODE);
|
|
|
|
skb_put_u8(skb, QCA_HCI_CC_SUCCESS);
|
|
|
|
hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
|
|
|
|
return hci_recv_frame(hdev, skb);
|
|
}
|
|
|
|
static int qca_download_firmware(struct hci_dev *hdev,
|
|
struct qca_fw_config *config,
|
|
enum qca_btsoc_type soc_type)
|
|
{
|
|
const struct firmware *fw;
|
|
u8 *data;
|
|
const u8 *segment;
|
|
int ret, size, remain, i = 0;
|
|
|
|
bt_dev_info(hdev, "QCA Downloading %s", config->fwname);
|
|
|
|
ret = request_firmware(&fw, config->fwname, &hdev->dev);
|
|
if (ret) {
|
|
bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",
|
|
config->fwname, ret);
|
|
return ret;
|
|
}
|
|
|
|
size = fw->size;
|
|
data = vmalloc(fw->size);
|
|
if (!data) {
|
|
bt_dev_err(hdev, "QCA Failed to allocate memory for file: %s",
|
|
config->fwname);
|
|
release_firmware(fw);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memcpy(data, fw->data, size);
|
|
release_firmware(fw);
|
|
|
|
qca_tlv_check_data(config, data, soc_type);
|
|
|
|
segment = data;
|
|
remain = size;
|
|
while (remain > 0) {
|
|
int segsize = min(MAX_SIZE_PER_TLV_SEGMENT, remain);
|
|
|
|
bt_dev_dbg(hdev, "Send segment %d, size %d", i++, segsize);
|
|
|
|
remain -= segsize;
|
|
/* The last segment is always acked regardless download mode */
|
|
if (!remain || segsize < MAX_SIZE_PER_TLV_SEGMENT)
|
|
config->dnld_mode = QCA_SKIP_EVT_NONE;
|
|
|
|
ret = qca_tlv_send_segment(hdev, segsize, segment,
|
|
config->dnld_mode, soc_type);
|
|
if (ret)
|
|
goto out;
|
|
|
|
segment += segsize;
|
|
}
|
|
|
|
/* Latest qualcomm chipsets are not sending a command complete event
|
|
* for every fw packet sent. They only respond with a vendor specific
|
|
* event for the last packet. This optimization in the chip will
|
|
* decrease the BT in initialization time. Here we will inject a command
|
|
* complete event to avoid a command timeout error message.
|
|
*/
|
|
if (config->dnld_type == QCA_SKIP_EVT_VSE_CC ||
|
|
config->dnld_type == QCA_SKIP_EVT_VSE)
|
|
ret = qca_inject_cmd_complete_event(hdev);
|
|
|
|
out:
|
|
vfree(data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qca_disable_soc_logging(struct hci_dev *hdev)
|
|
{
|
|
struct sk_buff *skb;
|
|
u8 cmd[2];
|
|
int err;
|
|
|
|
cmd[0] = QCA_DISABLE_LOGGING_SUB_OP;
|
|
cmd[1] = 0x00;
|
|
skb = __hci_cmd_sync_ev(hdev, QCA_DISABLE_LOGGING, sizeof(cmd), cmd,
|
|
HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
|
|
if (IS_ERR(skb)) {
|
|
err = PTR_ERR(skb);
|
|
bt_dev_err(hdev, "QCA Failed to disable soc logging(%d)", err);
|
|
return err;
|
|
}
|
|
|
|
kfree_skb(skb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
|
|
{
|
|
struct sk_buff *skb;
|
|
u8 cmd[9];
|
|
int err;
|
|
|
|
cmd[0] = EDL_NVM_ACCESS_SET_REQ_CMD;
|
|
cmd[1] = 0x02; /* TAG ID */
|
|
cmd[2] = sizeof(bdaddr_t); /* size */
|
|
memcpy(cmd + 3, bdaddr, sizeof(bdaddr_t));
|
|
skb = __hci_cmd_sync_ev(hdev, EDL_NVM_ACCESS_OPCODE, sizeof(cmd), cmd,
|
|
HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
|
|
if (IS_ERR(skb)) {
|
|
err = PTR_ERR(skb);
|
|
bt_dev_err(hdev, "QCA Change address command failed (%d)", err);
|
|
return err;
|
|
}
|
|
|
|
kfree_skb(skb);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
|
|
|
|
int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
|
|
enum qca_btsoc_type soc_type, u32 soc_ver,
|
|
const char *firmware_name)
|
|
{
|
|
struct qca_fw_config config;
|
|
int err;
|
|
u8 rom_ver = 0;
|
|
|
|
bt_dev_dbg(hdev, "QCA setup on UART");
|
|
|
|
config.user_baud_rate = baudrate;
|
|
|
|
/* Download rampatch file */
|
|
config.type = TLV_TYPE_PATCH;
|
|
if (qca_is_wcn399x(soc_type)) {
|
|
/* Firmware files to download are based on ROM version.
|
|
* ROM version is derived from last two bytes of soc_ver.
|
|
*/
|
|
rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
|
|
(soc_ver & 0x0000000f);
|
|
snprintf(config.fwname, sizeof(config.fwname),
|
|
"qca/crbtfw%02x.tlv", rom_ver);
|
|
} else if (soc_type == QCA_QCA6390) {
|
|
rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
|
|
(soc_ver & 0x0000000f);
|
|
snprintf(config.fwname, sizeof(config.fwname),
|
|
"qca/htbtfw%02x.tlv", rom_ver);
|
|
} else {
|
|
snprintf(config.fwname, sizeof(config.fwname),
|
|
"qca/rampatch_%08x.bin", soc_ver);
|
|
}
|
|
|
|
err = qca_download_firmware(hdev, &config, soc_type);
|
|
if (err < 0) {
|
|
bt_dev_err(hdev, "QCA Failed to download patch (%d)", err);
|
|
return err;
|
|
}
|
|
|
|
/* Give the controller some time to get ready to receive the NVM */
|
|
msleep(10);
|
|
|
|
/* Download NVM configuration */
|
|
config.type = TLV_TYPE_NVM;
|
|
if (firmware_name)
|
|
snprintf(config.fwname, sizeof(config.fwname),
|
|
"qca/%s", firmware_name);
|
|
else if (qca_is_wcn399x(soc_type))
|
|
snprintf(config.fwname, sizeof(config.fwname),
|
|
"qca/crnv%02x.bin", rom_ver);
|
|
else if (soc_type == QCA_QCA6390)
|
|
snprintf(config.fwname, sizeof(config.fwname),
|
|
"qca/htnv%02x.bin", rom_ver);
|
|
else
|
|
snprintf(config.fwname, sizeof(config.fwname),
|
|
"qca/nvm_%08x.bin", soc_ver);
|
|
|
|
err = qca_download_firmware(hdev, &config, soc_type);
|
|
if (err < 0) {
|
|
bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);
|
|
return err;
|
|
}
|
|
|
|
if (soc_type >= QCA_WCN3991) {
|
|
err = qca_disable_soc_logging(hdev);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
/* Perform HCI reset */
|
|
err = qca_send_reset(hdev);
|
|
if (err < 0) {
|
|
bt_dev_err(hdev, "QCA Failed to run HCI_RESET (%d)", err);
|
|
return err;
|
|
}
|
|
|
|
bt_dev_info(hdev, "QCA setup on UART is completed");
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(qca_uart_setup);
|
|
|
|
int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
|
|
{
|
|
struct sk_buff *skb;
|
|
int err;
|
|
|
|
skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
|
|
HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
|
|
if (IS_ERR(skb)) {
|
|
err = PTR_ERR(skb);
|
|
bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
|
|
return err;
|
|
}
|
|
|
|
kfree_skb(skb);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(qca_set_bdaddr);
|
|
|
|
|
|
MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
|
|
MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
|
|
MODULE_VERSION(VERSION);
|
|
MODULE_LICENSE("GPL");
|