mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 00:30:52 +07:00
bafb6cdd4f
[ Upstream commit cacf994a91d3a55c0c2f853d6429cd7b86113915 ] Although the AMD RS690 chipset has 64-bit DMA support, BIOS implementations sometimes fail to configure the memory limit registers correctly. The Acer F690GVM mainboard uses this chipset and a Marvell 88E8056 NIC. The sky2 driver programs the NIC to use 64-bit DMA, which will not work: sky2 0000:02:00.0: error interrupt status=0x8 sky2 0000:02:00.0 eth0: tx timeout sky2 0000:02:00.0 eth0: transmit ring 0 .. 22 report=0 done=0 Other drivers required by this mainboard either don't support 64-bit DMA, or have it disabled using driver specific quirks. For example, the ahci driver has quirks to enable or disable 64-bit DMA depending on the BIOS version (see ahci_sb600_enable_64bit() in ahci.c). This ahci quirk matches against the SB600 SATA controller, but the real issue is almost certainly with the RS690 PCI host that it was commonly attached to. To avoid this issue in all drivers with 64-bit DMA support, fix the configuration of the PCI host. If the kernel is aware of physical memory above 4GB, but the BIOS never configured the PCI host with this information, update the registers with our values. [bhelgaas: drop PCI_DEVICE_ID_ATI_RS690 definition] Link: https://lore.kernel.org/r/20210611214823.4898-1-mikel@mikelr.com Signed-off-by: Mikel Rychliski <mikel@mikelr.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|---|---|---|
| .. | ||
| acpi.c | ||
| amd_bus.c | ||
| broadcom_bus.c | ||
| bus_numa.c | ||
| bus_numa.h | ||
| ce4100.c | ||
| common.c | ||
| direct.c | ||
| early.c | ||
| fixup.c | ||
| i386.c | ||
| init.c | ||
| intel_mid_pci.c | ||
| irq.c | ||
| legacy.c | ||
| Makefile | ||
| mmconfig_32.c | ||
| mmconfig_64.c | ||
| mmconfig-shared.c | ||
| numachip.c | ||
| olpc.c | ||
| pcbios.c | ||
| sta2x11-fixup.c | ||
| xen.c | ||