/* * Copyright (c) 1996-2004 Russell King. * * Please note that this platform does not support 32-bit IDE IO. */ #include <linux/string.h> #include <linux/module.h> #include <linux/ioport.h> #include <linux/slab.h> #include <linux/blkdev.h> #include <linux/errno.h> #include <linux/ide.h> #include <linux/dma-mapping.h> #include <linux/device.h> #include <linux/init.h> #include <linux/scatterlist.h> #include <linux/io.h> #include <asm/dma.h> #include <asm/ecard.h> #define DRV_NAME "icside" #define ICS_IDENT_OFFSET 0x2280 #define ICS_ARCIN_V5_INTRSTAT 0x0000 #define ICS_ARCIN_V5_INTROFFSET 0x0004 #define ICS_ARCIN_V5_IDEOFFSET 0x2800 #define ICS_ARCIN_V5_IDEALTOFFSET 0x2b80 #define ICS_ARCIN_V5_IDESTEPPING 6 #define ICS_ARCIN_V6_IDEOFFSET_1 0x2000 #define ICS_ARCIN_V6_INTROFFSET_1 0x2200 #define ICS_ARCIN_V6_INTRSTAT_1 0x2290 #define ICS_ARCIN_V6_IDEALTOFFSET_1 0x2380 #define ICS_ARCIN_V6_IDEOFFSET_2 0x3000 #define ICS_ARCIN_V6_INTROFFSET_2 0x3200 #define ICS_ARCIN_V6_INTRSTAT_2 0x3290 #define ICS_ARCIN_V6_IDEALTOFFSET_2 0x3380 #define ICS_ARCIN_V6_IDESTEPPING 6 struct cardinfo { unsigned int dataoffset; unsigned int ctrloffset; unsigned int stepping; }; static struct cardinfo icside_cardinfo_v5 = { .dataoffset = ICS_ARCIN_V5_IDEOFFSET, .ctrloffset = ICS_ARCIN_V5_IDEALTOFFSET, .stepping = ICS_ARCIN_V5_IDESTEPPING, }; static struct cardinfo icside_cardinfo_v6_1 = { .dataoffset = ICS_ARCIN_V6_IDEOFFSET_1, .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_1, .stepping = ICS_ARCIN_V6_IDESTEPPING, }; static struct cardinfo icside_cardinfo_v6_2 = { .dataoffset = ICS_ARCIN_V6_IDEOFFSET_2, .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_2, .stepping = ICS_ARCIN_V6_IDESTEPPING, }; struct icside_state { unsigned int channel; unsigned int enabled; void __iomem *irq_port; void __iomem *ioc_base; unsigned int sel; unsigned int type; struct ide_host *host; }; #define ICS_TYPE_A3IN 0 #define ICS_TYPE_A3USER 1 #define ICS_TYPE_V6 3 #define ICS_TYPE_V5 15 #define ICS_TYPE_NOTYPE ((unsigned int)-1) /* ---------------- Version 5 PCB Support Functions --------------------- */ /* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr) * Purpose : enable interrupts from card */ static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr) { struct icside_state *state = ec->irq_data; writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET); } /* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr) * Purpose : disable interrupts from card */ static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr) { struct icside_state *state = ec->irq_data; readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET); } static const expansioncard_ops_t icside_ops_arcin_v5 = { .irqenable = icside_irqenable_arcin_v5, .irqdisable = icside_irqdisable_arcin_v5, }; /* ---------------- Version 6 PCB Support Functions --------------------- */ /* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) * Purpose : enable interrupts from card */ static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) { struct icside_state *state = ec->irq_data; void __iomem *base = state->irq_port; state->enabled = 1; switch (state->channel) { case 0: writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); readb(base + ICS_ARCIN_V6_INTROFFSET_2); break; case 1: writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); readb(base + ICS_ARCIN_V6_INTROFFSET_1); break; } } /* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) * Purpose : disable interrupts from card */ static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) { struct icside_state *state = ec->irq_data; state->enabled = 0; readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); } /* Prototype: icside_irqprobe(struct expansion_card *ec) * Purpose : detect an active interrupt from card */ static int icside_irqpending_arcin_v6(struct expansion_card *ec) { struct icside_state *state = ec->irq_data; return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 || readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1; } static const expansioncard_ops_t icside_ops_arcin_v6 = { .irqenable = icside_irqenable_arcin_v6, .irqdisable = icside_irqdisable_arcin_v6, .irqpending = icside_irqpending_arcin_v6, }; /* * Handle routing of interrupts. This is called before * we write the command to the drive. */ static void icside_maskproc(ide_drive_t *drive, int mask) { ide_hwif_t *hwif = drive->hwif; struct expansion_card *ec = ECARD_DEV(hwif->dev); struct icside_state *state = ecard_get_drvdata(ec); unsigned long flags; local_irq_save(flags); state->channel = hwif->channel; if (state->enabled && !mask) { switch (hwif->channel) { case 0: writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); break; case 1: writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); break; } } else { readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); } local_irq_restore(flags); } static const struct ide_port_ops icside_v6_no_dma_port_ops = { .maskproc = icside_maskproc, }; #ifdef CONFIG_BLK_DEV_IDEDMA_ICS /* * SG-DMA support. * * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers. * There is only one DMA controller per card, which means that only * one drive can be accessed at one time. NOTE! We do not enforce that * here, but we rely on the main IDE driver spotting that both * interfaces use the same IRQ, which should guarantee this. */ /* * Configure the IOMD to give the appropriate timings for the transfer * mode being requested. We take the advice of the ATA standards, and * calculate the cycle time based on the transfer mode, and the EIDE * MW DMA specs that the drive provides in the IDENTIFY command. * * We have the following IOMD DMA modes to choose from: * * Type Active Recovery Cycle * A 250 (250) 312 (550) 562 (800) * B 187 250 437 * C 125 (125) 125 (375) 250 (500) * D 62 125 187 * * (figures in brackets are actual measured timings) * * However, we also need to take care of the read/write active and * recovery timings: * * Read Write * Mode Active -- Recovery -- Cycle IOMD type * MW0 215 50 215 480 A * MW1 80 50 50 150 C * MW2 70 25 25 120 C */ static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { unsigned long cycle_time = 0; int use_dma_info = 0; const u8 xfer_mode = drive->dma_mode; switch (xfer_mode) { case XFER_MW_DMA_2: cycle_time = 250; use_dma_info = 1; break; case XFER_MW_DMA_1: cycle_time = 250; use_dma_info = 1; break; case XFER_MW_DMA_0: cycle_time = 480; break; case XFER_SW_DMA_2: case XFER_SW_DMA_1: case XFER_SW_DMA_0: cycle_time = 480; break; } /* * If we're going to be doing MW_DMA_1 or MW_DMA_2, we should * take care to note the values in the ID... */ if (use_dma_info && drive->id[ATA_ID_EIDE_DMA_TIME] > cycle_time) cycle_time = drive->id[ATA_ID_EIDE_DMA_TIME]; ide_set_drivedata(drive, (void *)cycle_time); printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n", drive->name, ide_xfer_verbose(xfer_mode), 2000 / (cycle_time ? cycle_time : (unsigned long) -1)); } static const struct ide_port_ops icside_v6_port_ops = { .set_dma_mode = icside_set_dma_mode, .maskproc = icside_maskproc, }; static void icside_dma_host_set(ide_drive_t *drive, int on) { } static int icside_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; struct expansion_card *ec = ECARD_DEV(hwif->dev); disable_dma(ec->dma); return get_dma_residue(ec->dma) != 0; } static void icside_dma_start(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; struct expansion_card *ec = ECARD_DEV(hwif->dev); /* We can not enable DMA on both channels simultaneously. */ BUG_ON(dma_channel_active(ec->dma)); enable_dma(ec->dma); } static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; struct expansion_card *ec = ECARD_DEV(hwif->dev); struct icside_state *state = ecard_get_drvdata(ec); unsigned int dma_mode; if (cmd->tf_flags & IDE_TFLAG_WRITE) dma_mode = DMA_MODE_WRITE; else dma_mode = DMA_MODE_READ; /* * We can not enable DMA on both channels. */ BUG_ON(dma_channel_active(ec->dma)); /* * Ensure that we have the right interrupt routed. */ icside_maskproc(drive, 0); /* * Route the DMA signals to the correct interface. */ writeb(state->sel | hwif->channel, state->ioc_base); /* * Select the correct timing for this drive. */ set_dma_speed(ec->dma, (unsigned long)ide_get_drivedata(drive)); /* * Tell the DMA engine about the SG table and * data direction. */ set_dma_sg(ec->dma, hwif->sg_table, cmd->sg_nents); set_dma_mode(ec->dma, dma_mode); return 0; } static int icside_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; struct expansion_card *ec = ECARD_DEV(hwif->dev); struct icside_state *state = ecard_get_drvdata(ec); return readb(state->irq_port + (hwif->channel ? ICS_ARCIN_V6_INTRSTAT_2 : ICS_ARCIN_V6_INTRSTAT_1)) & 1; } static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d) { hwif->dmatable_cpu = NULL; hwif->dmatable_dma = 0; return 0; } static const struct ide_dma_ops icside_v6_dma_ops = { .dma_host_set = icside_dma_host_set, .dma_setup = icside_dma_setup, .dma_start = icside_dma_start, .dma_end = icside_dma_end, .dma_test_irq = icside_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, }; #endif static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d) { return -EOPNOTSUPP; } static void icside_setup_ports(struct ide_hw *hw, void __iomem *base, struct cardinfo *info, struct expansion_card *ec) { unsigned long port = (unsigned long)base + info->dataoffset; hw->io_ports.data_addr = port; hw->io_ports.error_addr = port + (1 << info->stepping); hw->io_ports.nsect_addr = port + (2 << info->stepping); hw->io_ports.lbal_addr = port + (3 << info->stepping); hw->io_ports.lbam_addr = port + (4 << info->stepping); hw->io_ports.lbah_addr = port + (5 << info->stepping); hw->io_ports.device_addr = port + (6 << info->stepping); hw->io_ports.status_addr = port + (7 << info->stepping); hw->io_ports.ctl_addr = (unsigned long)base + info->ctrloffset; hw->irq = ec->irq; hw->dev = &ec->dev; } static const struct ide_port_info icside_v5_port_info = { .host_flags = IDE_HFLAG_NO_DMA, .chipset = ide_acorn, }; static int icside_register_v5(struct icside_state *state, struct expansion_card *ec) { void __iomem *base; struct ide_host *host; struct ide_hw hw, *hws[] = { &hw }; int ret; base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0); if (!base) return -ENOMEM; state->irq_port = base; ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT; ec->irqmask = 1; ecard_setirq(ec, &icside_ops_arcin_v5, state); /* * Be on the safe side - disable interrupts */ icside_irqdisable_arcin_v5(ec, 0); icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec); host = ide_host_alloc(&icside_v5_port_info, hws, 1); if (host == NULL) return -ENODEV; state->host = host; ecard_set_drvdata(ec, state); ret = ide_host_register(host, &icside_v5_port_info, hws); if (ret) goto err_free; return 0; err_free: ide_host_free(host); ecard_set_drvdata(ec, NULL); return ret; } static const struct ide_port_info icside_v6_port_info = { .init_dma = icside_dma_off_init, .port_ops = &icside_v6_no_dma_port_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO, .mwdma_mask = ATA_MWDMA2, .swdma_mask = ATA_SWDMA2, .chipset = ide_acorn, }; static int icside_register_v6(struct icside_state *state, struct expansion_card *ec) { void __iomem *ioc_base, *easi_base; struct ide_host *host; unsigned int sel = 0; int ret; struct ide_hw hw[2], *hws[] = { &hw[0], &hw[1] }; struct ide_port_info d = icside_v6_port_info; ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); if (!ioc_base) { ret = -ENOMEM; goto out; } easi_base = ioc_base; if (ecard_resource_flags(ec, ECARD_RES_EASI)) { easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0); if (!easi_base) { ret = -ENOMEM; goto out; } /* * Enable access to the EASI region. */ sel = 1 << 5; } writeb(sel, ioc_base); ecard_setirq(ec, &icside_ops_arcin_v6, state); state->irq_port = easi_base; state->ioc_base = ioc_base; state->sel = sel; /* * Be on the safe side - disable interrupts */ icside_irqdisable_arcin_v6(ec, 0); icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec); icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec); host = ide_host_alloc(&d, hws, 2); if (host == NULL) return -ENODEV; state->host = host; ecard_set_drvdata(ec, state); #ifdef CONFIG_BLK_DEV_IDEDMA_ICS if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { d.init_dma = icside_dma_init; d.port_ops = &icside_v6_port_ops; d.dma_ops = &icside_v6_dma_ops; } #endif ret = ide_host_register(host, &d, hws); if (ret) goto err_free; return 0; err_free: ide_host_free(host); if (d.dma_ops) free_dma(ec->dma); ecard_set_drvdata(ec, NULL); out: return ret; } static int icside_probe(struct expansion_card *ec, const struct ecard_id *id) { struct icside_state *state; void __iomem *idmem; int ret; ret = ecard_request_resources(ec); if (ret) goto out; state = kzalloc(sizeof(struct icside_state), GFP_KERNEL); if (!state) { ret = -ENOMEM; goto release; } state->type = ICS_TYPE_NOTYPE; idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); if (idmem) { unsigned int type; type = readb(idmem + ICS_IDENT_OFFSET) & 1; type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1; type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2; type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3; ecardm_iounmap(ec, idmem); state->type = type; } switch (state->type) { case ICS_TYPE_A3IN: dev_warn(&ec->dev, "A3IN unsupported\n"); ret = -ENODEV; break; case ICS_TYPE_A3USER: dev_warn(&ec->dev, "A3USER unsupported\n"); ret = -ENODEV; break; case ICS_TYPE_V5: ret = icside_register_v5(state, ec); break; case ICS_TYPE_V6: ret = icside_register_v6(state, ec); break; default: dev_warn(&ec->dev, "unknown interface type\n"); ret = -ENODEV; break; } if (ret == 0) goto out; kfree(state); release: ecard_release_resources(ec); out: return ret; } static void icside_remove(struct expansion_card *ec) { struct icside_state *state = ecard_get_drvdata(ec); switch (state->type) { case ICS_TYPE_V5: /* FIXME: tell IDE to stop using the interface */ /* Disable interrupts */ icside_irqdisable_arcin_v5(ec, 0); break; case ICS_TYPE_V6: /* FIXME: tell IDE to stop using the interface */ if (ec->dma != NO_DMA) free_dma(ec->dma); /* Disable interrupts */ icside_irqdisable_arcin_v6(ec, 0); /* Reset the ROM pointer/EASI selection */ writeb(0, state->ioc_base); break; } ecard_set_drvdata(ec, NULL); kfree(state); ecard_release_resources(ec); } static void icside_shutdown(struct expansion_card *ec) { struct icside_state *state = ecard_get_drvdata(ec); unsigned long flags; /* * Disable interrupts from this card. We need to do * this before disabling EASI since we may be accessing * this register via that region. */ local_irq_save(flags); ec->ops->irqdisable(ec, 0); local_irq_restore(flags); /* * Reset the ROM pointer so that we can read the ROM * after a soft reboot. This also disables access to * the IDE taskfile via the EASI region. */ if (state->ioc_base) writeb(0, state->ioc_base); } static const struct ecard_id icside_ids[] = { { MANU_ICS, PROD_ICS_IDE }, { MANU_ICS2, PROD_ICS2_IDE }, { 0xffff, 0xffff } }; static struct ecard_driver icside_driver = { .probe = icside_probe, .remove = icside_remove, .shutdown = icside_shutdown, .id_table = icside_ids, .drv = { .name = "icside", }, }; static int __init icside_init(void) { return ecard_register_driver(&icside_driver); } static void __exit icside_exit(void) { ecard_remove_driver(&icside_driver); } MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("ICS IDE driver"); module_init(icside_init); module_exit(icside_exit);