/* * hcd_queue.c - DesignWare HS OTG Controller host queuing routines * * Copyright (C) 2004-2013 Synopsys, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The names of the above-listed copyright holders may not be used * to endorse or promote products derived from this software without * specific prior written permission. * * ALTERNATIVELY, this software may be distributed under the terms of the * GNU General Public License ("GPL") as published by the Free Software * Foundation; either version 2 of the License, or (at your option) any * later version. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This file contains the functions to manage Queue Heads and Queue * Transfer Descriptors for Host mode */ #include #include #include #include #include #include #include #include #include #include #include "core.h" #include "hcd.h" /* Wait this long before releasing periodic reservation */ #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5)) /** * dwc2_periodic_channel_available() - Checks that a channel is available for a * periodic transfer * * @hsotg: The HCD state structure for the DWC OTG controller * * Return: 0 if successful, negative error code otherwise */ static int dwc2_periodic_channel_available(struct dwc2_hsotg *hsotg) { /* * Currently assuming that there is a dedicated host channel for * each periodic transaction plus at least one host channel for * non-periodic transactions */ int status; int num_channels; num_channels = hsotg->core_params->host_channels; if (hsotg->periodic_channels + hsotg->non_periodic_channels < num_channels && hsotg->periodic_channels < num_channels - 1) { status = 0; } else { dev_dbg(hsotg->dev, "%s: Total channels: %d, Periodic: %d, " "Non-periodic: %d\n", __func__, num_channels, hsotg->periodic_channels, hsotg->non_periodic_channels); status = -ENOSPC; } return status; } /** * dwc2_check_periodic_bandwidth() - Checks that there is sufficient bandwidth * for the specified QH in the periodic schedule * * @hsotg: The HCD state structure for the DWC OTG controller * @qh: QH containing periodic bandwidth required * * Return: 0 if successful, negative error code otherwise * * For simplicity, this calculation assumes that all the transfers in the * periodic schedule may occur in the same (micro)frame */ static int dwc2_check_periodic_bandwidth(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { int status; s16 max_claimed_usecs; status = 0; if (qh->dev_speed == USB_SPEED_HIGH || qh->do_split) { /* * High speed mode * Max periodic usecs is 80% x 125 usec = 100 usec */ max_claimed_usecs = 100 - qh->host_us; } else { /* * Full speed mode * Max periodic usecs is 90% x 1000 usec = 900 usec */ max_claimed_usecs = 900 - qh->host_us; } if (hsotg->periodic_usecs > max_claimed_usecs) { dev_err(hsotg->dev, "%s: already claimed usecs %d, required usecs %d\n", __func__, hsotg->periodic_usecs, qh->host_us); status = -ENOSPC; } return status; } /** * Microframe scheduler * track the total use in hsotg->frame_usecs * keep each qh use in qh->frame_usecs * when surrendering the qh then donate the time back */ static const unsigned short max_uframe_usecs[] = { 100, 100, 100, 100, 100, 100, 30, 0 }; void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg) { int i; for (i = 0; i < 8; i++) hsotg->frame_usecs[i] = max_uframe_usecs[i]; } static int dwc2_find_single_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { unsigned short utime = qh->host_us; int i; for (i = 0; i < 8; i++) { /* At the start hsotg->frame_usecs[i] = max_uframe_usecs[i] */ if (utime <= hsotg->frame_usecs[i]) { hsotg->frame_usecs[i] -= utime; qh->frame_usecs[i] += utime; return i; } } return -ENOSPC; } /* * use this for FS apps that can span multiple uframes */ static int dwc2_find_multi_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { unsigned short utime = qh->host_us; unsigned short xtime; int t_left; int i; int j; int k; for (i = 0; i < 8; i++) { if (hsotg->frame_usecs[i] <= 0) continue; /* * we need n consecutive slots so use j as a start slot * j plus j+1 must be enough time (for now) */ xtime = hsotg->frame_usecs[i]; for (j = i + 1; j < 8; j++) { /* * if we add this frame remaining time to xtime we may * be OK, if not we need to test j for a complete frame */ if (xtime + hsotg->frame_usecs[j] < utime) { if (hsotg->frame_usecs[j] < max_uframe_usecs[j]) continue; } if (xtime >= utime) { t_left = utime; for (k = i; k < 8; k++) { t_left -= hsotg->frame_usecs[k]; if (t_left <= 0) { qh->frame_usecs[k] += hsotg->frame_usecs[k] + t_left; hsotg->frame_usecs[k] = -t_left; return i; } else { qh->frame_usecs[k] += hsotg->frame_usecs[k]; hsotg->frame_usecs[k] = 0; } } } /* add the frame time to x time */ xtime += hsotg->frame_usecs[j]; /* we must have a fully available next frame or break */ if (xtime < utime && hsotg->frame_usecs[j] == max_uframe_usecs[j]) continue; } } return -ENOSPC; } static int dwc2_find_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { int ret; if (qh->dev_speed == USB_SPEED_HIGH) { /* if this is a hs transaction we need a full frame */ ret = dwc2_find_single_uframe(hsotg, qh); } else { /* * if this is a fs transaction we may need a sequence * of frames */ ret = dwc2_find_multi_uframe(hsotg, qh); } return ret; } /** * dwc2_do_unreserve() - Actually release the periodic reservation * * This function actually releases the periodic bandwidth that was reserved * by the given qh. * * @hsotg: The HCD state structure for the DWC OTG controller * @qh: QH for the periodic transfer. */ static void dwc2_do_unreserve(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { assert_spin_locked(&hsotg->lock); WARN_ON(!qh->unreserve_pending); /* No more unreserve pending--we're doing it */ qh->unreserve_pending = false; if (WARN_ON(!list_empty(&qh->qh_list_entry))) list_del_init(&qh->qh_list_entry); /* Update claimed usecs per (micro)frame */ hsotg->periodic_usecs -= qh->host_us; if (hsotg->core_params->uframe_sched > 0) { int i; for (i = 0; i < 8; i++) { hsotg->frame_usecs[i] += qh->frame_usecs[i]; qh->frame_usecs[i] = 0; } } else { /* Release periodic channel reservation */ hsotg->periodic_channels--; } } /** * dwc2_unreserve_timer_fn() - Timer function to release periodic reservation * * According to the kernel doc for usb_submit_urb() (specifically the part about * "Reserved Bandwidth Transfers"), we need to keep a reservation active as * long as a device driver keeps submitting. Since we're using HCD_BH to give * back the URB we need to give the driver a little bit of time before we * release the reservation. This worker is called after the appropriate * delay. * * @work: Pointer to a qh unreserve_work. */ static void dwc2_unreserve_timer_fn(unsigned long data) { struct dwc2_qh *qh = (struct dwc2_qh *)data; struct dwc2_hsotg *hsotg = qh->hsotg; unsigned long flags; /* * Wait for the lock, or for us to be scheduled again. We * could be scheduled again if: * - We started executing but didn't get the lock yet. * - A new reservation came in, but cancel didn't take effect * because we already started executing. * - The timer has been kicked again. * In that case cancel and wait for the next call. */ while (!spin_trylock_irqsave(&hsotg->lock, flags)) { if (timer_pending(&qh->unreserve_timer)) return; } /* * Might be no more unreserve pending if: * - We started executing but didn't get the lock yet. * - A new reservation came in, but cancel didn't take effect * because we already started executing. * * We can't put this in the loop above because unreserve_pending needs * to be accessed under lock, so we can only check it once we got the * lock. */ if (qh->unreserve_pending) dwc2_do_unreserve(hsotg, qh); spin_unlock_irqrestore(&hsotg->lock, flags); } /** * dwc2_check_max_xfer_size() - Checks that the max transfer size allowed in a * host channel is large enough to handle the maximum data transfer in a single * (micro)frame for a periodic transfer * * @hsotg: The HCD state structure for the DWC OTG controller * @qh: QH for a periodic endpoint * * Return: 0 if successful, negative error code otherwise */ static int dwc2_check_max_xfer_size(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { u32 max_xfer_size; u32 max_channel_xfer_size; int status = 0; max_xfer_size = dwc2_max_packet(qh->maxp) * dwc2_hb_mult(qh->maxp); max_channel_xfer_size = hsotg->core_params->max_transfer_size; if (max_xfer_size > max_channel_xfer_size) { dev_err(hsotg->dev, "%s: Periodic xfer length %d > max xfer length for channel %d\n", __func__, max_xfer_size, max_channel_xfer_size); status = -ENOSPC; } return status; } /** * dwc2_schedule_periodic() - Schedules an interrupt or isochronous transfer in * the periodic schedule * * @hsotg: The HCD state structure for the DWC OTG controller * @qh: QH for the periodic transfer. The QH should already contain the * scheduling information. * * Return: 0 if successful, negative error code otherwise */ static int dwc2_schedule_periodic(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { int status; status = dwc2_check_max_xfer_size(hsotg, qh); if (status) { dev_dbg(hsotg->dev, "%s: Channel max transfer size too small for periodic transfer\n", __func__); return status; } /* Cancel pending unreserve; if canceled OK, unreserve was pending */ if (del_timer(&qh->unreserve_timer)) WARN_ON(!qh->unreserve_pending); /* * Only need to reserve if there's not an unreserve pending, since if an * unreserve is pending then by definition our old reservation is still * valid. Unreserve might still be pending even if we didn't cancel if * dwc2_unreserve_timer_fn() already started. Code in the timer handles * that case. */ if (!qh->unreserve_pending) { if (hsotg->core_params->uframe_sched > 0) { int frame = -1; status = dwc2_find_uframe(hsotg, qh); if (status == 0) frame = 7; else if (status > 0) frame = status - 1; /* Set the new frame up */ if (frame >= 0) { qh->next_active_frame &= ~0x7; qh->next_active_frame |= (frame & 7); dwc2_sch_dbg(hsotg, "QH=%p sched_p nxt=%04x, uf=%d\n", qh, qh->next_active_frame, frame); } if (status > 0) status = 0; } else { status = dwc2_periodic_channel_available(hsotg); if (status) { dev_info(hsotg->dev, "%s: No host channel available for periodic transfer\n", __func__); return status; } status = dwc2_check_periodic_bandwidth(hsotg, qh); } if (status) { dev_dbg(hsotg->dev, "%s: Insufficient periodic bandwidth for periodic transfer\n", __func__); return status; } if (hsotg->core_params->uframe_sched <= 0) /* Reserve periodic channel */ hsotg->periodic_channels++; /* Update claimed usecs per (micro)frame */ hsotg->periodic_usecs += qh->host_us; } qh->unreserve_pending = 0; if (hsotg->core_params->dma_desc_enable > 0) /* Don't rely on SOF and start in ready schedule */ list_add_tail(&qh->qh_list_entry, &hsotg->periodic_sched_ready); else /* Always start in inactive schedule */ list_add_tail(&qh->qh_list_entry, &hsotg->periodic_sched_inactive); return status; } /** * dwc2_deschedule_periodic() - Removes an interrupt or isochronous transfer * from the periodic schedule * * @hsotg: The HCD state structure for the DWC OTG controller * @qh: QH for the periodic transfer */ static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { bool did_modify; assert_spin_locked(&hsotg->lock); /* * Schedule the unreserve to happen in a little bit. Cases here: * - Unreserve worker might be sitting there waiting to grab the lock. * In this case it will notice it's been schedule again and will * quit. * - Unreserve worker might not be scheduled. * * We should never already be scheduled since dwc2_schedule_periodic() * should have canceled the scheduled unreserve timer (hence the * warning on did_modify). * * We add + 1 to the timer to guarantee that at least 1 jiffy has * passed (otherwise if the jiffy counter might tick right after we * read it and we'll get no delay). */ did_modify = mod_timer(&qh->unreserve_timer, jiffies + DWC2_UNRESERVE_DELAY + 1); WARN_ON(did_modify); qh->unreserve_pending = 1; list_del_init(&qh->qh_list_entry); } /** * dwc2_qh_init() - Initializes a QH structure * * @hsotg: The HCD state structure for the DWC OTG controller * @qh: The QH to init * @urb: Holds the information about the device/endpoint needed to initialize * the QH */ #define SCHEDULE_SLOP 10 static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, struct dwc2_hcd_urb *urb) { int dev_speed, hub_addr, hub_port; char *speed, *type; dev_vdbg(hsotg->dev, "%s()\n", __func__); /* Initialize QH */ qh->hsotg = hsotg; setup_timer(&qh->unreserve_timer, dwc2_unreserve_timer_fn, (unsigned long)qh); qh->ep_type = dwc2_hcd_get_pipe_type(&urb->pipe_info); qh->ep_is_in = dwc2_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0; qh->data_toggle = DWC2_HC_PID_DATA0; qh->maxp = dwc2_hcd_get_mps(&urb->pipe_info); INIT_LIST_HEAD(&qh->qtd_list); INIT_LIST_HEAD(&qh->qh_list_entry); /* FS/LS Endpoint on HS Hub, NOT virtual root hub */ dev_speed = dwc2_host_get_speed(hsotg, urb->priv); dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port); if ((dev_speed == USB_SPEED_LOW || dev_speed == USB_SPEED_FULL) && hub_addr != 0 && hub_addr != 1) { dev_vdbg(hsotg->dev, "QH init: EP %d: TT found at hub addr %d, for port %d\n", dwc2_hcd_get_ep_num(&urb->pipe_info), hub_addr, hub_port); qh->do_split = 1; } if (qh->ep_type == USB_ENDPOINT_XFER_INT || qh->ep_type == USB_ENDPOINT_XFER_ISOC) { /* Compute scheduling parameters once and save them */ u32 hprt, prtspd; /* Todo: Account for split transfers in the bus time */ int bytecount = dwc2_hb_mult(qh->maxp) * dwc2_max_packet(qh->maxp); qh->host_us = NS_TO_US(usb_calc_bus_time(qh->do_split ? USB_SPEED_HIGH : dev_speed, qh->ep_is_in, qh->ep_type == USB_ENDPOINT_XFER_ISOC, bytecount)); /* Ensure frame_number corresponds to the reality */ hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg); /* Start in a slightly future (micro)frame */ qh->next_active_frame = dwc2_frame_num_inc(hsotg->frame_number, SCHEDULE_SLOP); qh->host_interval = urb->interval; dwc2_sch_dbg(hsotg, "QH=%p init nxt=%04x, fn=%04x, int=%#x\n", qh, qh->next_active_frame, hsotg->frame_number, qh->host_interval); #if 0 /* Increase interrupt polling rate for debugging */ if (qh->ep_type == USB_ENDPOINT_XFER_INT) qh->host_interval = 8; #endif hprt = dwc2_readl(hsotg->regs + HPRT0); prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; if (prtspd == HPRT0_SPD_HIGH_SPEED && (dev_speed == USB_SPEED_LOW || dev_speed == USB_SPEED_FULL)) { qh->host_interval *= 8; qh->next_active_frame |= 0x7; qh->start_split_frame = qh->next_active_frame; dwc2_sch_dbg(hsotg, "QH=%p init*8 nxt=%04x, fn=%04x, int=%#x\n", qh, qh->next_active_frame, hsotg->frame_number, qh->host_interval); } dev_dbg(hsotg->dev, "interval=%d\n", qh->host_interval); } dev_vdbg(hsotg->dev, "DWC OTG HCD QH Initialized\n"); dev_vdbg(hsotg->dev, "DWC OTG HCD QH - qh = %p\n", qh); dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Device Address = %d\n", dwc2_hcd_get_dev_addr(&urb->pipe_info)); dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Endpoint %d, %s\n", dwc2_hcd_get_ep_num(&urb->pipe_info), dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"); qh->dev_speed = dev_speed; switch (dev_speed) { case USB_SPEED_LOW: speed = "low"; break; case USB_SPEED_FULL: speed = "full"; break; case USB_SPEED_HIGH: speed = "high"; break; default: speed = "?"; break; } dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Speed = %s\n", speed); switch (qh->ep_type) { case USB_ENDPOINT_XFER_ISOC: type = "isochronous"; break; case USB_ENDPOINT_XFER_INT: type = "interrupt"; break; case USB_ENDPOINT_XFER_CONTROL: type = "control"; break; case USB_ENDPOINT_XFER_BULK: type = "bulk"; break; default: type = "?"; break; } dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Type = %s\n", type); if (qh->ep_type == USB_ENDPOINT_XFER_INT) { dev_vdbg(hsotg->dev, "DWC OTG HCD QH - usecs = %d\n", qh->host_us); dev_vdbg(hsotg->dev, "DWC OTG HCD QH - interval = %d\n", qh->host_interval); } } /** * dwc2_hcd_qh_create() - Allocates and initializes a QH * * @hsotg: The HCD state structure for the DWC OTG controller * @urb: Holds the information about the device/endpoint needed * to initialize the QH * @atomic_alloc: Flag to do atomic allocation if needed * * Return: Pointer to the newly allocated QH, or NULL on error */ struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg, struct dwc2_hcd_urb *urb, gfp_t mem_flags) { struct dwc2_qh *qh; if (!urb->priv) return NULL; /* Allocate memory */ qh = kzalloc(sizeof(*qh), mem_flags); if (!qh) return NULL; dwc2_qh_init(hsotg, qh, urb); if (hsotg->core_params->dma_desc_enable > 0 && dwc2_hcd_qh_init_ddma(hsotg, qh, mem_flags) < 0) { dwc2_hcd_qh_free(hsotg, qh); return NULL; } return qh; } /** * dwc2_hcd_qh_free() - Frees the QH * * @hsotg: HCD instance * @qh: The QH to free * * QH should already be removed from the list. QTD list should already be empty * if called from URB Dequeue. * * Must NOT be called with interrupt disabled or spinlock held */ void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { /* Make sure any unreserve work is finished. */ if (del_timer_sync(&qh->unreserve_timer)) { unsigned long flags; spin_lock_irqsave(&hsotg->lock, flags); dwc2_do_unreserve(hsotg, qh); spin_unlock_irqrestore(&hsotg->lock, flags); } if (qh->desc_list) dwc2_hcd_qh_free_ddma(hsotg, qh); kfree(qh); } /** * dwc2_hcd_qh_add() - Adds a QH to either the non periodic or periodic * schedule if it is not already in the schedule. If the QH is already in * the schedule, no action is taken. * * @hsotg: The HCD state structure for the DWC OTG controller * @qh: The QH to add * * Return: 0 if successful, negative error code otherwise */ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { int status; u32 intr_mask; if (dbg_qh(qh)) dev_vdbg(hsotg->dev, "%s()\n", __func__); if (!list_empty(&qh->qh_list_entry)) /* QH already in a schedule */ return 0; if (!dwc2_frame_num_le(qh->next_active_frame, hsotg->frame_number) && !hsotg->frame_number) { u16 new_frame; dev_dbg(hsotg->dev, "reset frame number counter\n"); new_frame = dwc2_frame_num_inc(hsotg->frame_number, SCHEDULE_SLOP); dwc2_sch_vdbg(hsotg, "QH=%p reset nxt=%04x=>%04x\n", qh, qh->next_active_frame, new_frame); qh->next_active_frame = new_frame; } /* Add the new QH to the appropriate schedule */ if (dwc2_qh_is_non_per(qh)) { /* Always start in inactive schedule */ list_add_tail(&qh->qh_list_entry, &hsotg->non_periodic_sched_inactive); return 0; } status = dwc2_schedule_periodic(hsotg, qh); if (status) return status; if (!hsotg->periodic_qh_count) { intr_mask = dwc2_readl(hsotg->regs + GINTMSK); intr_mask |= GINTSTS_SOF; dwc2_writel(intr_mask, hsotg->regs + GINTMSK); } hsotg->periodic_qh_count++; return 0; } /** * dwc2_hcd_qh_unlink() - Removes a QH from either the non-periodic or periodic * schedule. Memory is not freed. * * @hsotg: The HCD state structure * @qh: QH to remove from schedule */ void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { u32 intr_mask; dev_vdbg(hsotg->dev, "%s()\n", __func__); if (list_empty(&qh->qh_list_entry)) /* QH is not in a schedule */ return; if (dwc2_qh_is_non_per(qh)) { if (hsotg->non_periodic_qh_ptr == &qh->qh_list_entry) hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; list_del_init(&qh->qh_list_entry); return; } dwc2_deschedule_periodic(hsotg, qh); hsotg->periodic_qh_count--; if (!hsotg->periodic_qh_count) { intr_mask = dwc2_readl(hsotg->regs + GINTMSK); intr_mask &= ~GINTSTS_SOF; dwc2_writel(intr_mask, hsotg->regs + GINTMSK); } } /* * Schedule the next continuing periodic split transfer */ static void dwc2_sched_periodic_split(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, u16 frame_number, int sched_next_periodic_split) { u16 incr; u16 old_frame = qh->next_active_frame; if (sched_next_periodic_split) { qh->next_active_frame = frame_number; incr = dwc2_frame_num_inc(qh->start_split_frame, 1); if (dwc2_frame_num_le(frame_number, incr)) { /* * Allow one frame to elapse after start split * microframe before scheduling complete split, but * DON'T if we are doing the next start split in the * same frame for an ISOC out */ if (qh->ep_type != USB_ENDPOINT_XFER_ISOC || qh->ep_is_in != 0) { qh->next_active_frame = dwc2_frame_num_inc( qh->next_active_frame, 1); } } } else { qh->next_active_frame = dwc2_frame_num_inc(qh->start_split_frame, qh->host_interval); if (dwc2_frame_num_le(qh->next_active_frame, frame_number)) qh->next_active_frame = frame_number; qh->next_active_frame |= 0x7; qh->start_split_frame = qh->next_active_frame; } dwc2_sch_vdbg(hsotg, "QH=%p next(%d) fn=%04x, nxt=%04x=>%04x (%+d)\n", qh, sched_next_periodic_split, frame_number, old_frame, qh->next_active_frame, dwc2_frame_num_dec(qh->next_active_frame, old_frame)); } /* * Deactivates a QH. For non-periodic QHs, removes the QH from the active * non-periodic schedule. The QH is added to the inactive non-periodic * schedule if any QTDs are still attached to the QH. * * For periodic QHs, the QH is removed from the periodic queued schedule. If * there are any QTDs still attached to the QH, the QH is added to either the * periodic inactive schedule or the periodic ready schedule and its next * scheduled frame is calculated. The QH is placed in the ready schedule if * the scheduled frame has been reached already. Otherwise it's placed in the * inactive schedule. If there are no QTDs attached to the QH, the QH is * completely removed from the periodic schedule. */ void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, int sched_next_periodic_split) { u16 frame_number; if (dbg_qh(qh)) dev_vdbg(hsotg->dev, "%s()\n", __func__); if (dwc2_qh_is_non_per(qh)) { dwc2_hcd_qh_unlink(hsotg, qh); if (!list_empty(&qh->qtd_list)) /* Add back to inactive non-periodic schedule */ dwc2_hcd_qh_add(hsotg, qh); return; } frame_number = dwc2_hcd_get_frame_number(hsotg); if (qh->do_split) { dwc2_sched_periodic_split(hsotg, qh, frame_number, sched_next_periodic_split); } else { qh->next_active_frame = dwc2_frame_num_inc( qh->next_active_frame, qh->host_interval); if (dwc2_frame_num_le(qh->next_active_frame, frame_number)) qh->next_active_frame = frame_number; } if (list_empty(&qh->qtd_list)) { dwc2_hcd_qh_unlink(hsotg, qh); return; } /* * Remove from periodic_sched_queued and move to * appropriate queue */ if ((hsotg->core_params->uframe_sched > 0 && dwc2_frame_num_le(qh->next_active_frame, frame_number)) || (hsotg->core_params->uframe_sched <= 0 && qh->next_active_frame == frame_number)) list_move_tail(&qh->qh_list_entry, &hsotg->periodic_sched_ready); else list_move_tail(&qh->qh_list_entry, &hsotg->periodic_sched_inactive); } /** * dwc2_hcd_qtd_init() - Initializes a QTD structure * * @qtd: The QTD to initialize * @urb: The associated URB */ void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb) { qtd->urb = urb; if (dwc2_hcd_get_pipe_type(&urb->pipe_info) == USB_ENDPOINT_XFER_CONTROL) { /* * The only time the QTD data toggle is used is on the data * phase of control transfers. This phase always starts with * DATA1. */ qtd->data_toggle = DWC2_HC_PID_DATA1; qtd->control_phase = DWC2_CONTROL_SETUP; } /* Start split */ qtd->complete_split = 0; qtd->isoc_split_pos = DWC2_HCSPLT_XACTPOS_ALL; qtd->isoc_split_offset = 0; qtd->in_process = 0; /* Store the qtd ptr in the urb to reference the QTD */ urb->qtd = qtd; } /** * dwc2_hcd_qtd_add() - Adds a QTD to the QTD-list of a QH * Caller must hold driver lock. * * @hsotg: The DWC HCD structure * @qtd: The QTD to add * @qh: Queue head to add qtd to * * Return: 0 if successful, negative error code otherwise * * If the QH to which the QTD is added is not currently scheduled, it is placed * into the proper schedule based on its EP type. */ int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, struct dwc2_qh *qh) { int retval; if (unlikely(!qh)) { dev_err(hsotg->dev, "%s: Invalid QH\n", __func__); retval = -EINVAL; goto fail; } retval = dwc2_hcd_qh_add(hsotg, qh); if (retval) goto fail; qtd->qh = qh; list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list); return 0; fail: return retval; }