/****************************************************************************/

/*
 *	coldfire.h -- Motorola ColdFire CPU sepecific defines
 *
 *	(C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com)
 *	(C) Copyright 2000, Lineo (www.lineo.com)
 */

/****************************************************************************/
#ifndef	coldfire_h
#define	coldfire_h
/****************************************************************************/


/*
 *	Define master clock frequency. This is essentially done at config
 *	time now. No point enumerating dozens of possible clock options
 *	here. Also the peripheral clock (bus clock) divide ratio is set
 *	at config time too.
 */
#ifdef CONFIG_CLOCK_SET
#define	MCF_CLK		CONFIG_CLOCK_FREQ
#define	MCF_BUSCLK	(CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV)
#else
#error "Don't know what your ColdFire CPU clock frequency is??"
#endif

/*
 *	Define the processor internal peripherals base address.
 *
 *	The majority of ColdFire parts use an MBAR register to set
 *	the base address. Some have an IPSBAR register instead, and it
 *	has slightly different rules on its size and alignment. Some
 *	parts have fixed addresses and the internal peripherals cannot
 *	be relocated in the address space.
 *
 *	This is generally setup by the boards start up code.
 */
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
#define	MCF_IPSBAR	0x40000000
#else
#define	MCF_MBAR	0x10000000
#endif

/****************************************************************************/
#endif	/* coldfire_h */