/* * Device Tree Include file for Marvell Armada 398 Development Board * * Copyright (C) 2015 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "armada-398.dtsi" / { model = "Marvell Armada 398 Development Board"; compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390"; chosen { stdout-path = "serial0:115200n8"; }; memory { device_type = "memory"; reg = <0x00000000 0x80000000>; /* 2 GB */ }; soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; internal-regs { i2c@11000 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; status = "okay"; clock-frequency = <100000>; }; serial@12000 { pinctrl-0 = <&uart0_pins>; pinctrl-names = "default"; status = "okay"; }; serial@12100 { pinctrl-0 = <&uart1_pins>; pinctrl-names = "default"; status = "okay"; }; usb@58000 { status = "okay"; }; flash@d0000 { status = "okay"; pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; num-cs = <1>; marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; nand-ecc-strength = <8>; nand-ecc-step-size = <512>; partition@0 { label = "U-Boot"; reg = <0 0x800000>; }; partition@800000 { label = "Linux"; reg = <0x800000 0x800000>; }; partition@1000000 { label = "Filesystem"; reg = <0x1000000 0x3f000000>; }; }; usb3@f8000 { status = "okay"; }; }; pcie { status = "okay"; pcie@1,0 { status = "okay"; }; pcie@2,0 { status = "okay"; }; pcie@3,0 { status = "okay"; }; }; }; }; &spi1 { status = "okay"; pinctrl-0 = <&spi1_pins>; pinctrl-names = "default"; spi-flash@0 { #address-cells = <1>; #size-cells = <0>; compatible = "n25q128a13", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <108000000>; partition@0 { label = "U-Boot"; reg = <0 0x400000>; }; partition@400000 { label = "Filesystem"; reg = <0x400000 0x1000000>; }; }; };