// SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include "kirkwood.dtsi" #include "kirkwood-6281.dtsi" / { model = "Iomega Iconnect"; compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; reg = <0x00000000 0x10000000>; }; chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; stdout-path = &uart0; linux,initrd-start = <0x4500040>; linux,initrd-end = <0x4800000>; }; ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_button_reset: pmx-button-reset { marvell,pins = "mpp12"; marvell,function = "gpio"; }; pmx_button_otb: pmx-button-otb { marvell,pins = "mpp35"; marvell,function = "gpio"; }; pmx_led_level: pmx-led-level { marvell,pins = "mpp41"; marvell,function = "gpio"; }; pmx_led_power_blue: pmx-led-power-blue { marvell,pins = "mpp42"; marvell,function = "gpio"; }; pmx_led_power_red: pmx-power-red { marvell,pins = "mpp43"; marvell,function = "gpio"; }; pmx_led_usb1: pmx-led-usb1 { marvell,pins = "mpp44"; marvell,function = "gpio"; }; pmx_led_usb2: pmx-led-usb2 { marvell,pins = "mpp45"; marvell,function = "gpio"; }; pmx_led_usb3: pmx-led-usb3 { marvell,pins = "mpp46"; marvell,function = "gpio"; }; pmx_led_usb4: pmx-led-usb4 { marvell,pins = "mpp47"; marvell,function = "gpio"; }; pmx_led_otb: pmx-led-otb { marvell,pins = "mpp48"; marvell,function = "gpio"; }; }; i2c@11000 { status = "okay"; lm63: lm63@4c { compatible = "national,lm63"; reg = <0x4c>; }; }; serial@12000 { status = "ok"; }; }; gpio-leds { compatible = "gpio-leds"; pinctrl-0 = < &pmx_led_level &pmx_led_power_blue &pmx_led_power_red &pmx_led_usb1 &pmx_led_usb2 &pmx_led_usb3 &pmx_led_usb4 &pmx_led_otb >; pinctrl-names = "default"; led-level { label = "led_level"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; power-blue { label = "power:blue"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; power-red { label = "power:red"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; usb1 { label = "usb1:blue"; gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; usb2 { label = "usb2:blue"; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; usb3 { label = "usb3:blue"; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; usb4 { label = "usb4:blue"; gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; otb { label = "otb:blue"; gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; }; gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; pinctrl-0 = < &pmx_button_reset &pmx_button_otb >; pinctrl-names = "default"; otb { label = "OTB Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; }; }; &nand { status = "okay"; partition@0 { label = "uboot"; reg = <0x0000000 0xc0000>; }; partition@a0000 { label = "env"; reg = <0xa0000 0x20000>; }; partition@100000 { label = "zImage"; reg = <0x100000 0x300000>; }; partition@540000 { label = "initrd"; reg = <0x540000 0x300000>; }; partition@980000 { label = "boot"; reg = <0x980000 0x1f400000>; }; }; &mdio { status = "okay"; ethphy0: ethernet-phy@11 { reg = <11>; }; }; ð0 { status = "okay"; ethernet0-port@0 { phy-handle = <ðphy0>; }; }; &pciec { status = "okay"; }; &pcie0 { status = "okay"; };