/* QLogic qed NIC Driver * * Copyright (c) 2015 QLogic Corporation * * This software is available under the terms of the GNU General Public License * (GPL) Version 2, available from the file COPYING in the main directory of * this source tree. */ #ifndef _QED_IF_H #define _QED_IF_H #include #include #include #include #include #include #include #include #include #include #include #include #include #include enum qed_led_mode { QED_LED_MODE_OFF, QED_LED_MODE_ON, QED_LED_MODE_RESTORE }; #define DIRECT_REG_WR(reg_addr, val) writel((u32)val, \ (void __iomem *)(reg_addr)) #define DIRECT_REG_RD(reg_addr) readl((void __iomem *)(reg_addr)) #define QED_COALESCE_MAX 0xFF /* forward */ struct qed_dev; struct qed_eth_pf_params { /* The following parameters are used during HW-init * and these parameters need to be passed as arguments * to update_pf_params routine invoked before slowpath start */ u16 num_cons; }; struct qed_pf_params { struct qed_eth_pf_params eth_pf_params; }; enum qed_int_mode { QED_INT_MODE_INTA, QED_INT_MODE_MSIX, QED_INT_MODE_MSI, QED_INT_MODE_POLL, }; struct qed_sb_info { struct status_block *sb_virt; dma_addr_t sb_phys; u32 sb_ack; /* Last given ack */ u16 igu_sb_id; void __iomem *igu_addr; u8 flags; #define QED_SB_INFO_INIT 0x1 #define QED_SB_INFO_SETUP 0x2 struct qed_dev *cdev; }; struct qed_dev_info { unsigned long pci_mem_start; unsigned long pci_mem_end; unsigned int pci_irq; u8 num_hwfns; u8 hw_mac[ETH_ALEN]; bool is_mf_default; /* FW version */ u16 fw_major; u16 fw_minor; u16 fw_rev; u16 fw_eng; /* MFW version */ u32 mfw_rev; u32 flash_size; u8 mf_mode; }; enum qed_sb_type { QED_SB_TYPE_L2_QUEUE, }; enum qed_protocol { QED_PROTOCOL_ETH, }; struct qed_link_params { bool link_up; #define QED_LINK_OVERRIDE_SPEED_AUTONEG BIT(0) #define QED_LINK_OVERRIDE_SPEED_ADV_SPEEDS BIT(1) #define QED_LINK_OVERRIDE_SPEED_FORCED_SPEED BIT(2) #define QED_LINK_OVERRIDE_PAUSE_CONFIG BIT(3) u32 override_flags; bool autoneg; u32 adv_speeds; u32 forced_speed; #define QED_LINK_PAUSE_AUTONEG_ENABLE BIT(0) #define QED_LINK_PAUSE_RX_ENABLE BIT(1) #define QED_LINK_PAUSE_TX_ENABLE BIT(2) u32 pause_config; }; struct qed_link_output { bool link_up; u32 supported_caps; /* In SUPPORTED defs */ u32 advertised_caps; /* In ADVERTISED defs */ u32 lp_caps; /* In ADVERTISED defs */ u32 speed; /* In Mb/s */ u8 duplex; /* In DUPLEX defs */ u8 port; /* In PORT defs */ bool autoneg; u32 pause_config; }; #define QED_DRV_VER_STR_SIZE 12 struct qed_slowpath_params { u32 int_mode; u8 drv_major; u8 drv_minor; u8 drv_rev; u8 drv_eng; u8 name[QED_DRV_VER_STR_SIZE]; }; #define ILT_PAGE_SIZE_TCFC 0x8000 /* 32KB */ struct qed_int_info { struct msix_entry *msix; u8 msix_cnt; /* This should be updated by the protocol driver */ u8 used_cnt; }; struct qed_common_cb_ops { void (*link_update)(void *dev, struct qed_link_output *link); }; struct qed_common_ops { struct qed_dev* (*probe)(struct pci_dev *dev, enum qed_protocol protocol, u32 dp_module, u8 dp_level); void (*remove)(struct qed_dev *cdev); int (*set_power_state)(struct qed_dev *cdev, pci_power_t state); void (*set_id)(struct qed_dev *cdev, char name[], char ver_str[]); /* Client drivers need to make this call before slowpath_start. * PF params required for the call before slowpath_start is * documented within the qed_pf_params structure definition. */ void (*update_pf_params)(struct qed_dev *cdev, struct qed_pf_params *params); int (*slowpath_start)(struct qed_dev *cdev, struct qed_slowpath_params *params); int (*slowpath_stop)(struct qed_dev *cdev); /* Requests to use `cnt' interrupts for fastpath. * upon success, returns number of interrupts allocated for fastpath. */ int (*set_fp_int)(struct qed_dev *cdev, u16 cnt); /* Fills `info' with pointers required for utilizing interrupts */ int (*get_fp_int)(struct qed_dev *cdev, struct qed_int_info *info); u32 (*sb_init)(struct qed_dev *cdev, struct qed_sb_info *sb_info, void *sb_virt_addr, dma_addr_t sb_phy_addr, u16 sb_id, enum qed_sb_type type); u32 (*sb_release)(struct qed_dev *cdev, struct qed_sb_info *sb_info, u16 sb_id); void (*simd_handler_config)(struct qed_dev *cdev, void *token, int index, void (*handler)(void *)); void (*simd_handler_clean)(struct qed_dev *cdev, int index); /** * @brief set_link - set links according to params * * @param cdev * @param params - values used to override the default link configuration * * @return 0 on success, error otherwise. */ int (*set_link)(struct qed_dev *cdev, struct qed_link_params *params); /** * @brief get_link - returns the current link state. * * @param cdev * @param if_link - structure to be filled with current link configuration. */ void (*get_link)(struct qed_dev *cdev, struct qed_link_output *if_link); /** * @brief - drains chip in case Tx completions fail to arrive due to pause. * * @param cdev */ int (*drain)(struct qed_dev *cdev); /** * @brief update_msglvl - update module debug level * * @param cdev * @param dp_module * @param dp_level */ void (*update_msglvl)(struct qed_dev *cdev, u32 dp_module, u8 dp_level); int (*chain_alloc)(struct qed_dev *cdev, enum qed_chain_use_mode intended_use, enum qed_chain_mode mode, u16 num_elems, size_t elem_size, struct qed_chain *p_chain); void (*chain_free)(struct qed_dev *cdev, struct qed_chain *p_chain); /** * @brief set_led - Configure LED mode * * @param cdev * @param mode - LED mode * * @return 0 on success, error otherwise. */ int (*set_led)(struct qed_dev *cdev, enum qed_led_mode mode); }; #define MASK_FIELD(_name, _value) \ ((_value) &= (_name ## _MASK)) #define FIELD_VALUE(_name, _value) \ ((_value & _name ## _MASK) << _name ## _SHIFT) #define SET_FIELD(value, name, flag) \ do { \ (value) &= ~(name ## _MASK << name ## _SHIFT); \ (value) |= (((u64)flag) << (name ## _SHIFT)); \ } while (0) #define GET_FIELD(value, name) \ (((value) >> (name ## _SHIFT)) & name ## _MASK) /* Debug print definitions */ #define DP_ERR(cdev, fmt, ...) \ pr_err("[%s:%d(%s)]" fmt, \ __func__, __LINE__, \ DP_NAME(cdev) ? DP_NAME(cdev) : "", \ ## __VA_ARGS__) \ #define DP_NOTICE(cdev, fmt, ...) \ do { \ if (unlikely((cdev)->dp_level <= QED_LEVEL_NOTICE)) { \ pr_notice("[%s:%d(%s)]" fmt, \ __func__, __LINE__, \ DP_NAME(cdev) ? DP_NAME(cdev) : "", \ ## __VA_ARGS__); \ \ } \ } while (0) #define DP_INFO(cdev, fmt, ...) \ do { \ if (unlikely((cdev)->dp_level <= QED_LEVEL_INFO)) { \ pr_notice("[%s:%d(%s)]" fmt, \ __func__, __LINE__, \ DP_NAME(cdev) ? DP_NAME(cdev) : "", \ ## __VA_ARGS__); \ } \ } while (0) #define DP_VERBOSE(cdev, module, fmt, ...) \ do { \ if (unlikely(((cdev)->dp_level <= QED_LEVEL_VERBOSE) && \ ((cdev)->dp_module & module))) { \ pr_notice("[%s:%d(%s)]" fmt, \ __func__, __LINE__, \ DP_NAME(cdev) ? DP_NAME(cdev) : "", \ ## __VA_ARGS__); \ } \ } while (0) enum DP_LEVEL { QED_LEVEL_VERBOSE = 0x0, QED_LEVEL_INFO = 0x1, QED_LEVEL_NOTICE = 0x2, QED_LEVEL_ERR = 0x3, }; #define QED_LOG_LEVEL_SHIFT (30) #define QED_LOG_VERBOSE_MASK (0x3fffffff) #define QED_LOG_INFO_MASK (0x40000000) #define QED_LOG_NOTICE_MASK (0x80000000) enum DP_MODULE { QED_MSG_SPQ = 0x10000, QED_MSG_STATS = 0x20000, QED_MSG_DCB = 0x40000, QED_MSG_IOV = 0x80000, QED_MSG_SP = 0x100000, QED_MSG_STORAGE = 0x200000, QED_MSG_CXT = 0x800000, QED_MSG_ILT = 0x2000000, QED_MSG_ROCE = 0x4000000, QED_MSG_DEBUG = 0x8000000, /* to be added...up to 0x8000000 */ }; enum qed_mf_mode { QED_MF_DEFAULT, QED_MF_OVLAN, QED_MF_NPAR, }; struct qed_eth_stats { u64 no_buff_discards; u64 packet_too_big_discard; u64 ttl0_discard; u64 rx_ucast_bytes; u64 rx_mcast_bytes; u64 rx_bcast_bytes; u64 rx_ucast_pkts; u64 rx_mcast_pkts; u64 rx_bcast_pkts; u64 mftag_filter_discards; u64 mac_filter_discards; u64 tx_ucast_bytes; u64 tx_mcast_bytes; u64 tx_bcast_bytes; u64 tx_ucast_pkts; u64 tx_mcast_pkts; u64 tx_bcast_pkts; u64 tx_err_drop_pkts; u64 tpa_coalesced_pkts; u64 tpa_coalesced_events; u64 tpa_aborts_num; u64 tpa_not_coalesced_pkts; u64 tpa_coalesced_bytes; /* port */ u64 rx_64_byte_packets; u64 rx_127_byte_packets; u64 rx_255_byte_packets; u64 rx_511_byte_packets; u64 rx_1023_byte_packets; u64 rx_1518_byte_packets; u64 rx_1522_byte_packets; u64 rx_2047_byte_packets; u64 rx_4095_byte_packets; u64 rx_9216_byte_packets; u64 rx_16383_byte_packets; u64 rx_crc_errors; u64 rx_mac_crtl_frames; u64 rx_pause_frames; u64 rx_pfc_frames; u64 rx_align_errors; u64 rx_carrier_errors; u64 rx_oversize_packets; u64 rx_jabbers; u64 rx_undersize_packets; u64 rx_fragments; u64 tx_64_byte_packets; u64 tx_65_to_127_byte_packets; u64 tx_128_to_255_byte_packets; u64 tx_256_to_511_byte_packets; u64 tx_512_to_1023_byte_packets; u64 tx_1024_to_1518_byte_packets; u64 tx_1519_to_2047_byte_packets; u64 tx_2048_to_4095_byte_packets; u64 tx_4096_to_9216_byte_packets; u64 tx_9217_to_16383_byte_packets; u64 tx_pause_frames; u64 tx_pfc_frames; u64 tx_lpi_entry_count; u64 tx_total_collisions; u64 brb_truncates; u64 brb_discards; u64 rx_mac_bytes; u64 rx_mac_uc_packets; u64 rx_mac_mc_packets; u64 rx_mac_bc_packets; u64 rx_mac_frames_ok; u64 tx_mac_bytes; u64 tx_mac_uc_packets; u64 tx_mac_mc_packets; u64 tx_mac_bc_packets; u64 tx_mac_ctrl_frames; }; #define QED_SB_IDX 0x0002 #define RX_PI 0 #define TX_PI(tc) (RX_PI + 1 + tc) struct qed_sb_cnt_info { int sb_cnt; int sb_iov_cnt; int sb_free_blk; }; static inline u16 qed_sb_update_sb_idx(struct qed_sb_info *sb_info) { u32 prod = 0; u16 rc = 0; prod = le32_to_cpu(sb_info->sb_virt->prod_index) & STATUS_BLOCK_PROD_INDEX_MASK; if (sb_info->sb_ack != prod) { sb_info->sb_ack = prod; rc |= QED_SB_IDX; } /* Let SB update */ mmiowb(); return rc; } /** * * @brief This function creates an update command for interrupts that is * written to the IGU. * * @param sb_info - This is the structure allocated and * initialized per status block. Assumption is * that it was initialized using qed_sb_init * @param int_cmd - Enable/Disable/Nop * @param upd_flg - whether igu consumer should be * updated. * * @return inline void */ static inline void qed_sb_ack(struct qed_sb_info *sb_info, enum igu_int_cmd int_cmd, u8 upd_flg) { struct igu_prod_cons_update igu_ack = { 0 }; igu_ack.sb_id_and_flags = ((sb_info->sb_ack << IGU_PROD_CONS_UPDATE_SB_INDEX_SHIFT) | (upd_flg << IGU_PROD_CONS_UPDATE_UPDATE_FLAG_SHIFT) | (int_cmd << IGU_PROD_CONS_UPDATE_ENABLE_INT_SHIFT) | (IGU_SEG_ACCESS_REG << IGU_PROD_CONS_UPDATE_SEGMENT_ACCESS_SHIFT)); DIRECT_REG_WR(sb_info->igu_addr, igu_ack.sb_id_and_flags); /* Both segments (interrupts & acks) are written to same place address; * Need to guarantee all commands will be received (in-order) by HW. */ mmiowb(); barrier(); } static inline void __internal_ram_wr(void *p_hwfn, void __iomem *addr, int size, u32 *data) { unsigned int i; for (i = 0; i < size / sizeof(*data); i++) DIRECT_REG_WR(&((u32 __iomem *)addr)[i], data[i]); } static inline void internal_ram_wr(void __iomem *addr, int size, u32 *data) { __internal_ram_wr(NULL, addr, size, data); } #endif