# # Platform drivers # Most drivers here are currently for webcam support menuconfig V4L_PLATFORM_DRIVERS bool "V4L platform devices" depends on MEDIA_CAMERA_SUPPORT default n ---help--- Say Y here to enable support for platform-specific V4L drivers. if V4L_PLATFORM_DRIVERS source "drivers/media/platform/marvell-ccic/Kconfig" config VIDEO_VIA_CAMERA tristate "VIAFB camera controller support" depends on FB_VIA select VIDEOBUF_DMA_SG select VIDEO_OV7670 help Driver support for the integrated camera controller in VIA Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems with ov7670 sensors. # # Platform multimedia device configuration # source "drivers/media/platform/davinci/Kconfig" source "drivers/media/platform/omap/Kconfig" source "drivers/media/platform/blackfin/Kconfig" config VIDEO_SH_VOU tristate "SuperH VOU video output driver" depends on MEDIA_CAMERA_SUPPORT depends on VIDEO_DEV && I2C && HAS_DMA depends on ARCH_SHMOBILE || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG help Support for the Video Output Unit (VOU) on SuperH SoCs. config VIDEO_VIU tristate "Freescale VIU Video Driver" depends on VIDEO_V4L2 && PPC_MPC512x select VIDEOBUF_DMA_CONTIG default y ---help--- Support for Freescale VIU video driver. This device captures video data, or overlays video on DIU frame buffer. Say Y here if you want to enable VIU device on MPC5121e Rev2+. In doubt, say N. config VIDEO_M32R_AR tristate "AR devices" depends on VIDEO_V4L2 depends on M32R || COMPILE_TEST ---help--- This is a video4linux driver for the Renesas AR (Artificial Retina) camera module. config VIDEO_M32R_AR_M64278 tristate "AR device with color module M64278(VGA)" depends on PLAT_M32700UT select VIDEO_M32R_AR ---help--- This is a video4linux driver for the Renesas AR (Artificial Retina) with M64278E-800 camera module. This module supports VGA(640x480 pixels) resolutions. To compile this driver as a module, choose M here: the module will be called arv. config VIDEO_OMAP3 tristate "OMAP 3 Camera support" depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 depends on HAS_DMA && OF depends on OMAP_IOMMU select ARM_DMA_USE_IOMMU select VIDEOBUF2_DMA_CONTIG select MFD_SYSCON ---help--- Driver for an OMAP 3 camera controller. config VIDEO_OMAP3_DEBUG bool "OMAP 3 Camera debug messages" depends on VIDEO_OMAP3 ---help--- Enable debug messages on OMAP 3 camera controller driver. config VIDEO_S3C_CAMIF tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API depends on PM depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG ---help--- This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera host interface (CAMIF). To compile this driver as a module, choose M here: the module will be called s3c-camif. source "drivers/media/platform/soc_camera/Kconfig" source "drivers/media/platform/exynos4-is/Kconfig" source "drivers/media/platform/s5p-tv/Kconfig" source "drivers/media/platform/am437x/Kconfig" source "drivers/media/platform/xilinx/Kconfig" config VIDEO_TI_CAL tristate "TI CAL (Camera Adaptation Layer) driver" depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API depends on SOC_DRA7XX || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG default n ---help--- Support for the TI CAL (Camera Adaptation Layer) block found on DRA72X SoC. In TI Technical Reference Manual this module is referred as Camera Interface Subsystem (CAMSS). endif # V4L_PLATFORM_DRIVERS menuconfig V4L_MEM2MEM_DRIVERS bool "Memory-to-memory multimedia devices" depends on VIDEO_V4L2 depends on MEDIA_CAMERA_SUPPORT default n ---help--- Say Y here to enable selecting drivers for V4L devices that use system memory for both source and destination buffers, as opposed to capture and output drivers, which use memory buffers for just one of those. if V4L_MEM2MEM_DRIVERS config VIDEO_CODA tristate "Chips&Media Coda multi-standard codec IP" depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_MXC depends on HAS_DMA select SRAM select VIDEOBUF2_DMA_CONTIG select VIDEOBUF2_VMALLOC select V4L2_MEM2MEM_DEV select GENERIC_ALLOCATOR ---help--- Coda is a range of video codec IPs that supports H.264, MPEG-4, and other video formats. config VIDEO_MEM2MEM_DEINTERLACE tristate "Deinterlace support" depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help Generic deinterlacing V4L2 driver. config VIDEO_SAMSUNG_S5P_G2D tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" depends on VIDEO_DEV && VIDEO_V4L2 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV default n ---help--- This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D 2d graphics accelerator. config VIDEO_SAMSUNG_S5P_JPEG tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver" depends on VIDEO_DEV && VIDEO_V4L2 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV ---help--- This is a v4l2 driver for Samsung S5P, EXYNOS3250 and EXYNOS4 JPEG codec config VIDEO_SAMSUNG_S5P_MFC tristate "Samsung S5P MFC Video Codec" depends on VIDEO_DEV && VIDEO_V4L2 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG default n help MFC 5.1 and 6.x driver for V4L2 config VIDEO_MX2_EMMAPRP tristate "MX2 eMMa-PrP support" depends on VIDEO_DEV && VIDEO_V4L2 depends on SOC_IMX27 || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help MX2X chips have a PrP that can be used to process buffers from memory to memory. Operations include resizing and format conversion. config VIDEO_SAMSUNG_EXYNOS_GSC tristate "Samsung Exynos G-Scaler driver" depends on VIDEO_DEV && VIDEO_V4L2 depends on ARCH_EXYNOS5 || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler. config VIDEO_STI_BDISP tristate "STMicroelectronics BDISP 2D blitter driver" depends on VIDEO_DEV && VIDEO_V4L2 depends on HAS_DMA depends on ARCH_STI || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help This v4l2 mem2mem driver is a 2D blitter for STMicroelectronics SoC. config VIDEO_SH_VEU tristate "SuperH VEU mem2mem video processing driver" depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help Support for the Video Engine Unit (VEU) on SuperH and SH-Mobile SoCs. config VIDEO_RENESAS_JPU tristate "Renesas JPEG Processing Unit" depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA depends on ARCH_SHMOBILE || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV ---help--- This is a V4L2 driver for the Renesas JPEG Processing Unit. To compile this driver as a module, choose M here: the module will be called rcar_jpu. config VIDEO_RENESAS_VSP1 tristate "Renesas VSP1 Video Processing Engine" depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAS_DMA depends on (ARCH_SHMOBILE && OF) || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG ---help--- This is a V4L2 driver for the Renesas VSP1 video processing engine. To compile this driver as a module, choose M here: the module will be called vsp1. config VIDEO_TI_VPE tristate "TI VPE (Video Processing Engine) driver" depends on VIDEO_DEV && VIDEO_V4L2 depends on SOC_DRA7XX || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV default n ---help--- Support for the TI VPE(Video Processing Engine) block found on DRA7XX SoC. config VIDEO_TI_VPE_DEBUG bool "VPE debug messages" depends on VIDEO_TI_VPE ---help--- Enable debug messages on VPE driver. endif # V4L_MEM2MEM_DRIVERS menuconfig V4L_TEST_DRIVERS bool "Media test drivers" depends on MEDIA_CAMERA_SUPPORT if V4L_TEST_DRIVERS source "drivers/media/platform/vivid/Kconfig" config VIDEO_VIM2M tristate "Virtual Memory-to-Memory Driver" depends on VIDEO_DEV && VIDEO_V4L2 select VIDEOBUF2_VMALLOC select V4L2_MEM2MEM_DEV default n ---help--- This is a virtual test device for the memory-to-memory driver framework. endif #V4L_TEST_DRIVERS menuconfig DVB_PLATFORM_DRIVERS bool "DVB platform devices" depends on MEDIA_DIGITAL_TV_SUPPORT default n ---help--- Say Y here to enable support for platform-specific Digital TV drivers. if DVB_PLATFORM_DRIVERS source "drivers/media/platform/sti/c8sectpfe/Kconfig" endif #DVB_PLATFORM_DRIVERS