/* * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP * Copyright (C) 1996 Cort Dougan * Adapted for Power Macintosh by Paul Mackerras. * Low-level exception handlers and MMU support * rewritten by Paul Mackerras. * Copyright (C) 1996 Paul Mackerras. * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net). * * This file contains the low-level support and setup for the * PowerPC platform, including trap and interrupt dispatch. * (The PPC 8xx embedded CPUs use head_8xx.S instead.) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "head_32.h" /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */ #define LOAD_BAT(n, reg, RA, RB) \ /* see the comment for clear_bats() -- Cort */ \ li RA,0; \ mtspr SPRN_IBAT##n##U,RA; \ mtspr SPRN_DBAT##n##U,RA; \ lwz RA,(n*16)+0(reg); \ lwz RB,(n*16)+4(reg); \ mtspr SPRN_IBAT##n##U,RA; \ mtspr SPRN_IBAT##n##L,RB; \ beq 1f; \ lwz RA,(n*16)+8(reg); \ lwz RB,(n*16)+12(reg); \ mtspr SPRN_DBAT##n##U,RA; \ mtspr SPRN_DBAT##n##L,RB; \ 1: __HEAD .stabs "arch/powerpc/kernel/",N_SO,0,0,0f .stabs "head_32.S",N_SO,0,0,0f 0: _ENTRY(_stext); /* * _start is defined this way because the XCOFF loader in the OpenFirmware * on the powermac expects the entry point to be a procedure descriptor. */ _ENTRY(_start); /* * These are here for legacy reasons, the kernel used to * need to look like a coff function entry for the pmac * but we're always started by some kind of bootloader now. * -- Cort */ nop /* used by __secondary_hold on prep (mtx) and chrp smp */ nop /* used by __secondary_hold on prep (mtx) and chrp smp */ nop /* PMAC * Enter here with the kernel text, data and bss loaded starting at * 0, running with virtual == physical mapping. * r5 points to the prom entry point (the client interface handler * address). Address translation is turned on, with the prom * managing the hash table. Interrupts are disabled. The stack * pointer (r1) points to just below the end of the half-meg region * from 0x380000 - 0x400000, which is mapped in already. * * If we are booted from MacOS via BootX, we enter with the kernel * image loaded somewhere, and the following values in registers: * r3: 'BooX' (0x426f6f58) * r4: virtual address of boot_infos_t * r5: 0 * * PREP * This is jumped to on prep systems right after the kernel is relocated * to its proper place in memory by the boot loader. The expected layout * of the regs is: * r3: ptr to residual data * r4: initrd_start or if no initrd then 0 * r5: initrd_end - unused if r4 is 0 * r6: Start of command line string * r7: End of command line string * * This just gets a minimal mmu environment setup so we can call * start_here() to do the real work. * -- Cort */ .globl __start __start: /* * We have to do any OF calls before we map ourselves to KERNELBASE, * because OF may have I/O devices mapped into that area * (particularly on CHRP). */ cmpwi 0,r5,0 beq 1f #ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE /* find out where we are now */ bcl 20,31,$+4 0: mflr r8 /* r8 = runtime addr here */ addis r8,r8,(_stext - 0b)@ha addi r8,r8,(_stext - 0b)@l /* current runtime base addr */ bl prom_init #endif /* CONFIG_PPC_OF_BOOT_TRAMPOLINE */ /* We never return. We also hit that trap if trying to boot * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */ trap /* * Check for BootX signature when supporting PowerMac and branch to * appropriate trampoline if it's present */ #ifdef CONFIG_PPC_PMAC 1: lis r31,0x426f ori r31,r31,0x6f58 cmpw 0,r3,r31 bne 1f bl bootx_init trap #endif /* CONFIG_PPC_PMAC */ 1: mr r31,r3 /* save device tree ptr */ li r24,0 /* cpu # */ /* * early_init() does the early machine identification and does * the necessary low-level setup and clears the BSS * -- Cort */ bl early_init /* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains * the physical address we are running at, returned by early_init() */ bl mmu_off __after_mmu_off: bl clear_bats bl flush_tlbs bl initial_bats bl load_segment_registers #ifdef CONFIG_KASAN bl early_hash_table #endif #if defined(CONFIG_BOOTX_TEXT) bl setup_disp_bat #endif #ifdef CONFIG_PPC_EARLY_DEBUG_CPM bl setup_cpm_bat #endif #ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO bl setup_usbgecko_bat #endif /* * Call setup_cpu for CPU 0 and initialize 6xx Idle */ bl reloc_offset li r24,0 /* cpu# */ bl call_setup_cpu /* Call setup_cpu for this CPU */ #ifdef CONFIG_PPC_BOOK3S_32 bl reloc_offset bl init_idle_6xx #endif /* CONFIG_PPC_BOOK3S_32 */ /* * We need to run with _start at physical address 0. * On CHRP, we are loaded at 0x10000 since OF on CHRP uses * the exception vectors at 0 (and therefore this copy * overwrites OF's exception vectors with our own). * The MMU is off at this point. */ bl reloc_offset mr r26,r3 addis r4,r3,KERNELBASE@h /* current address of _start */ lis r5,PHYSICAL_START@h cmplw 0,r4,r5 /* already running at PHYSICAL_START? */ bne relocate_kernel /* * we now have the 1st 16M of ram mapped with the bats. * prep needs the mmu to be turned on here, but pmac already has it on. * this shouldn't bother the pmac since it just gets turned on again * as we jump to our code at KERNELBASE. -- Cort * Actually no, pmac doesn't have it on any more. BootX enters with MMU * off, and in other cases, we now turn it off before changing BATs above. */ turn_on_mmu: mfmsr r0 ori r0,r0,MSR_DR|MSR_IR|MSR_RI mtspr SPRN_SRR1,r0 lis r0,start_here@h ori r0,r0,start_here@l mtspr SPRN_SRR0,r0 SYNC RFI /* enables MMU */ /* * We need __secondary_hold as a place to hold the other cpus on * an SMP machine, even when we are running a UP kernel. */ . = 0xc0 /* for prep bootloader */ li r3,1 /* MTX only has 1 cpu */ .globl __secondary_hold __secondary_hold: /* tell the master we're here */ stw r3,__secondary_hold_acknowledge@l(0) #ifdef CONFIG_SMP 100: lwz r4,0(0) /* wait until we're told to start */ cmpw 0,r4,r3 bne 100b /* our cpu # was at addr 0 - go */ mr r24,r3 /* cpu # */ b __secondary_start #else b . #endif /* CONFIG_SMP */ .globl __secondary_hold_spinloop __secondary_hold_spinloop: .long 0 .globl __secondary_hold_acknowledge __secondary_hold_acknowledge: .long -1 /* System reset */ /* core99 pmac starts the seconary here by changing the vector, and putting it back to what it was (unknown_exception) when done. */ EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD) /* Machine check */ /* * On CHRP, this is complicated by the fact that we could get a * machine check inside RTAS, and we have no guarantee that certain * critical registers will have the values we expect. The set of * registers that might have bad values includes all the GPRs * and all the BATs. We indicate that we are in RTAS by putting * a non-zero value, the address of the exception frame to use, * in thread.rtas_sp. The machine check handler checks thread.rtas_sp * and uses its value if it is non-zero. * (Other exception handlers assume that r1 is a valid kernel stack * pointer when we take an exception from supervisor mode.) * -- paulus. */ . = 0x200 DO_KVM 0x200 mtspr SPRN_SPRG_SCRATCH0,r10 mtspr SPRN_SPRG_SCRATCH1,r11 mfcr r10 #ifdef CONFIG_PPC_CHRP mfspr r11, SPRN_SPRG_THREAD lwz r11, RTAS_SP(r11) cmpwi cr1, r11, 0 bne cr1, 7f #endif /* CONFIG_PPC_CHRP */ EXCEPTION_PROLOG_1 7: EXCEPTION_PROLOG_2 addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_PPC_CHRP bne cr1,1f #endif EXC_XFER_STD(0x200, machine_check_exception) #ifdef CONFIG_PPC_CHRP 1: b machine_check_in_rtas #endif /* Data access exception. */ . = 0x300 DO_KVM 0x300 DataAccess: EXCEPTION_PROLOG mfspr r10,SPRN_DSISR stw r10,_DSISR(r11) #ifdef CONFIG_PPC_KUAP andis. r0,r10,(DSISR_BAD_FAULT_32S | DSISR_DABRMATCH | DSISR_PROTFAULT)@h #else andis. r0,r10,(DSISR_BAD_FAULT_32S|DSISR_DABRMATCH)@h #endif bne 1f /* if not, try to put a PTE */ mfspr r4,SPRN_DAR /* into the hash table */ rlwinm r3,r10,32-15,21,21 /* DSISR_STORE -> _PAGE_RW */ BEGIN_MMU_FTR_SECTION bl hash_page END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE) 1: lwz r5,_DSISR(r11) /* get DSISR value */ mfspr r4,SPRN_DAR EXC_XFER_LITE(0x300, handle_page_fault) /* Instruction access exception. */ . = 0x400 DO_KVM 0x400 InstructionAccess: EXCEPTION_PROLOG andis. r0,r9,SRR1_ISI_NOPT@h /* no pte found? */ beq 1f /* if so, try to put a PTE */ li r3,0 /* into the hash table */ mr r4,r12 /* SRR0 is fault address */ BEGIN_MMU_FTR_SECTION bl hash_page END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE) 1: mr r4,r12 andis. r5,r9,DSISR_SRR1_MATCH_32S@h /* Filter relevant SRR1 bits */ EXC_XFER_LITE(0x400, handle_page_fault) /* External interrupt */ EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) /* Alignment exception */ . = 0x600 DO_KVM 0x600 Alignment: EXCEPTION_PROLOG mfspr r4,SPRN_DAR stw r4,_DAR(r11) mfspr r5,SPRN_DSISR stw r5,_DSISR(r11) addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE(0x600, alignment_exception) /* Program check exception */ EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD) /* Floating-point unavailable */ . = 0x800 DO_KVM 0x800 FPUnavailable: BEGIN_FTR_SECTION /* * Certain Freescale cores don't have a FPU and treat fp instructions * as a FP Unavailable exception. Redirect to illegal/emulation handling. */ b ProgramCheck END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE) EXCEPTION_PROLOG beq 1f bl load_up_fpu /* if from user, just load it up */ b fast_exception_return 1: addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception) /* Decrementer */ EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE) EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE) EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE) /* System call */ . = 0xc00 DO_KVM 0xc00 SystemCall: EXCEPTION_PROLOG EXC_XFER_EE_LITE(0xc00, DoSyscall) /* Single step - not used on 601 */ EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD) EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE) /* * The Altivec unavailable trap is at 0x0f20. Foo. * We effectively remap it to 0x3000. * We include an altivec unavailable exception vector even if * not configured for Altivec, so that you can't panic a * non-altivec kernel running on a machine with altivec just * by executing an altivec instruction. */ . = 0xf00 DO_KVM 0xf00 b PerformanceMonitor . = 0xf20 DO_KVM 0xf20 b AltiVecUnavailable /* * Handle TLB miss for instruction on 603/603e. * Note: we get an alternate set of r0 - r3 to use automatically. */ . = 0x1000 InstructionTLBMiss: /* * r0: scratch * r1: linux style pte ( later becomes ppc hardware pte ) * r2: ptr to linux-style pte * r3: scratch */ /* Get PTE (linux-style) and check access */ mfspr r3,SPRN_IMISS #if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) lis r1,PAGE_OFFSET@h /* check if kernel address */ cmplw 0,r1,r3 #endif mfspr r2, SPRN_SPRG_PGDIR #ifdef CONFIG_SWAP li r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC #else li r1,_PAGE_PRESENT | _PAGE_EXEC #endif #if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) bge- 112f lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */ addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */ #endif 112: rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */ lwz r2,0(r2) /* get pmd entry */ rlwinm. r2,r2,0,0,19 /* extract address of pte page */ beq- InstructionAddressInvalid /* return if no mapping */ rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */ lwz r0,0(r2) /* get linux-style pte */ andc. r1,r1,r0 /* check access & ~permission */ bne- InstructionAddressInvalid /* return if access not permitted */ /* Convert linux-style PTE to low word of PPC-style PTE */ rlwimi r0,r0,32-2,31,31 /* _PAGE_USER -> PP lsb */ ori r1, r1, 0xe06 /* clear out reserved bits */ andc r1, r0, r1 /* PP = user? 1 : 0 */ BEGIN_FTR_SECTION rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) mtspr SPRN_RPA,r1 tlbli r3 mfspr r3,SPRN_SRR1 /* Need to restore CR0 */ mtcrf 0x80,r3 rfi InstructionAddressInvalid: mfspr r3,SPRN_SRR1 rlwinm r1,r3,9,6,6 /* Get load/store bit */ addis r1,r1,0x2000 mtspr SPRN_DSISR,r1 /* (shouldn't be needed) */ andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */ or r2,r2,r1 mtspr SPRN_SRR1,r2 mfspr r1,SPRN_IMISS /* Get failing address */ rlwinm. r2,r2,0,31,31 /* Check for little endian access */ rlwimi r2,r2,1,30,30 /* change 1 -> 3 */ xor r1,r1,r2 mtspr SPRN_DAR,r1 /* Set fault address */ mfmsr r0 /* Restore "normal" registers */ xoris r0,r0,MSR_TGPR>>16 mtcrf 0x80,r3 /* Restore CR0 */ mtmsr r0 b InstructionAccess /* * Handle TLB miss for DATA Load operation on 603/603e */ . = 0x1100 DataLoadTLBMiss: /* * r0: scratch * r1: linux style pte ( later becomes ppc hardware pte ) * r2: ptr to linux-style pte * r3: scratch */ /* Get PTE (linux-style) and check access */ mfspr r3,SPRN_DMISS lis r1,PAGE_OFFSET@h /* check if kernel address */ cmplw 0,r1,r3 mfspr r2, SPRN_SPRG_PGDIR #ifdef CONFIG_SWAP li r1, _PAGE_PRESENT | _PAGE_ACCESSED #else li r1, _PAGE_PRESENT #endif bge- 112f lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */ addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */ 112: rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */ lwz r2,0(r2) /* get pmd entry */ rlwinm. r2,r2,0,0,19 /* extract address of pte page */ beq- DataAddressInvalid /* return if no mapping */ rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */ lwz r0,0(r2) /* get linux-style pte */ andc. r1,r1,r0 /* check access & ~permission */ bne- DataAddressInvalid /* return if access not permitted */ /* * NOTE! We are assuming this is not an SMP system, otherwise * we would need to update the pte atomically with lwarx/stwcx. */ /* Convert linux-style PTE to low word of PPC-style PTE */ rlwinm r1,r0,32-9,30,30 /* _PAGE_RW -> PP msb */ rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */ rlwimi r0,r0,32-1,31,31 /* _PAGE_USER -> PP lsb */ ori r1,r1,0xe04 /* clear out reserved bits */ andc r1,r0,r1 /* PP = user? rw? 1: 3: 0 */ BEGIN_FTR_SECTION rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) mtspr SPRN_RPA,r1 mfspr r2,SPRN_SRR1 /* Need to restore CR0 */ mtcrf 0x80,r2 BEGIN_MMU_FTR_SECTION li r0,1 mfspr r1,SPRN_SPRG_603_LRU rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */ slw r0,r0,r2 xor r1,r0,r1 srw r0,r1,r2 mtspr SPRN_SPRG_603_LRU,r1 mfspr r2,SPRN_SRR1 rlwimi r2,r0,31-14,14,14 mtspr SPRN_SRR1,r2 END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU) tlbld r3 rfi DataAddressInvalid: mfspr r3,SPRN_SRR1 rlwinm r1,r3,9,6,6 /* Get load/store bit */ addis r1,r1,0x2000 mtspr SPRN_DSISR,r1 andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */ mtspr SPRN_SRR1,r2 mfspr r1,SPRN_DMISS /* Get failing address */ rlwinm. r2,r2,0,31,31 /* Check for little endian access */ beq 20f /* Jump if big endian */ xori r1,r1,3 20: mtspr SPRN_DAR,r1 /* Set fault address */ mfmsr r0 /* Restore "normal" registers */ xoris r0,r0,MSR_TGPR>>16 mtcrf 0x80,r3 /* Restore CR0 */ mtmsr r0 b DataAccess /* * Handle TLB miss for DATA Store on 603/603e */ . = 0x1200 DataStoreTLBMiss: /* * r0: scratch * r1: linux style pte ( later becomes ppc hardware pte ) * r2: ptr to linux-style pte * r3: scratch */ /* Get PTE (linux-style) and check access */ mfspr r3,SPRN_DMISS lis r1,PAGE_OFFSET@h /* check if kernel address */ cmplw 0,r1,r3 mfspr r2, SPRN_SPRG_PGDIR #ifdef CONFIG_SWAP li r1, _PAGE_RW | _PAGE_PRESENT | _PAGE_ACCESSED #else li r1, _PAGE_RW | _PAGE_PRESENT #endif bge- 112f lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */ addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */ 112: rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */ lwz r2,0(r2) /* get pmd entry */ rlwinm. r2,r2,0,0,19 /* extract address of pte page */ beq- DataAddressInvalid /* return if no mapping */ rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */ lwz r0,0(r2) /* get linux-style pte */ andc. r1,r1,r0 /* check access & ~permission */ bne- DataAddressInvalid /* return if access not permitted */ /* * NOTE! We are assuming this is not an SMP system, otherwise * we would need to update the pte atomically with lwarx/stwcx. */ /* Convert linux-style PTE to low word of PPC-style PTE */ rlwimi r0,r0,32-2,31,31 /* _PAGE_USER -> PP lsb */ li r1,0xe06 /* clear out reserved bits & PP msb */ andc r1,r0,r1 /* PP = user? 1: 0 */ BEGIN_FTR_SECTION rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) mtspr SPRN_RPA,r1 mfspr r2,SPRN_SRR1 /* Need to restore CR0 */ mtcrf 0x80,r2 BEGIN_MMU_FTR_SECTION li r0,1 mfspr r1,SPRN_SPRG_603_LRU rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */ slw r0,r0,r2 xor r1,r0,r1 srw r0,r1,r2 mtspr SPRN_SPRG_603_LRU,r1 mfspr r2,SPRN_SRR1 rlwimi r2,r0,31-14,14,14 mtspr SPRN_SRR1,r2 END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU) tlbld r3 rfi #ifndef CONFIG_ALTIVEC #define altivec_assist_exception unknown_exception #endif EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE) EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE) EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE) EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD) EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_EE) EXCEPTION(0x2100, Trap_21, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2200, Trap_22, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2300, Trap_23, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2400, Trap_24, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2500, Trap_25, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2600, Trap_26, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2700, Trap_27, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2800, Trap_28, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2900, Trap_29, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2a00, Trap_2a, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2b00, Trap_2b, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2c00, Trap_2c, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2d00, Trap_2d, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2e00, Trap_2e, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2f00, Trap_2f, unknown_exception, EXC_XFER_EE) . = 0x3000 AltiVecUnavailable: EXCEPTION_PROLOG #ifdef CONFIG_ALTIVEC beq 1f bl load_up_altivec /* if from user, just load it up */ b fast_exception_return #endif /* CONFIG_ALTIVEC */ 1: addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception) PerformanceMonitor: EXCEPTION_PROLOG addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_STD(0xf00, performance_monitor_exception) /* * This code is jumped to from the startup code to copy * the kernel image to physical address PHYSICAL_START. */ relocate_kernel: addis r9,r26,klimit@ha /* fetch klimit */ lwz r25,klimit@l(r9) addis r25,r25,-KERNELBASE@h lis r3,PHYSICAL_START@h /* Destination base address */ li r6,0 /* Destination offset */ li r5,0x4000 /* # bytes of memory to copy */ bl copy_and_flush /* copy the first 0x4000 bytes */ addi r0,r3,4f@l /* jump to the address of 4f */ mtctr r0 /* in copy and do the rest. */ bctr /* jump to the copy */ 4: mr r5,r25 bl copy_and_flush /* copy the rest */ b turn_on_mmu /* * Copy routine used to copy the kernel to start at physical address 0 * and flush and invalidate the caches as needed. * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5. */ _ENTRY(copy_and_flush) addi r5,r5,-4 addi r6,r6,-4 4: li r0,L1_CACHE_BYTES/4 mtctr r0 3: addi r6,r6,4 /* copy a cache line */ lwzx r0,r6,r4 stwx r0,r6,r3 bdnz 3b dcbst r6,r3 /* write it to memory */ sync icbi r6,r3 /* flush the icache line */ cmplw 0,r6,r5 blt 4b sync /* additional sync needed on g4 */ isync addi r5,r5,4 addi r6,r6,4 blr #ifdef CONFIG_SMP .globl __secondary_start_mpc86xx __secondary_start_mpc86xx: mfspr r3, SPRN_PIR stw r3, __secondary_hold_acknowledge@l(0) mr r24, r3 /* cpu # */ b __secondary_start .globl __secondary_start_pmac_0 __secondary_start_pmac_0: /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */ li r24,0 b 1f li r24,1 b 1f li r24,2 b 1f li r24,3 1: /* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0 set to map the 0xf0000000 - 0xffffffff region */ mfmsr r0 rlwinm r0,r0,0,28,26 /* clear DR (0x10) */ SYNC mtmsr r0 isync .globl __secondary_start __secondary_start: /* Copy some CPU settings from CPU 0 */ bl __restore_cpu_setup lis r3,-KERNELBASE@h mr r4,r24 bl call_setup_cpu /* Call setup_cpu for this CPU */ #ifdef CONFIG_PPC_BOOK3S_32 lis r3,-KERNELBASE@h bl init_idle_6xx #endif /* CONFIG_PPC_BOOK3S_32 */ /* get current's stack and current */ lis r2,secondary_current@ha tophys(r2,r2) lwz r2,secondary_current@l(r2) tophys(r1,r2) lwz r1,TASK_STACK(r1) /* stack */ addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD li r0,0 tophys(r3,r1) stw r0,0(r3) /* load up the MMU */ bl load_up_mmu /* ptr to phys current thread */ tophys(r4,r2) addi r4,r4,THREAD /* phys address of our thread_struct */ mtspr SPRN_SPRG_THREAD,r4 lis r4, (swapper_pg_dir - PAGE_OFFSET)@h ori r4, r4, (swapper_pg_dir - PAGE_OFFSET)@l mtspr SPRN_SPRG_PGDIR, r4 /* enable MMU and jump to start_secondary */ li r4,MSR_KERNEL lis r3,start_secondary@h ori r3,r3,start_secondary@l mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 SYNC RFI #endif /* CONFIG_SMP */ #ifdef CONFIG_KVM_BOOK3S_HANDLER #include "../kvm/book3s_rmhandlers.S" #endif /* * Those generic dummy functions are kept for CPUs not * included in CONFIG_PPC_BOOK3S_32 */ #if !defined(CONFIG_PPC_BOOK3S_32) _ENTRY(__save_cpu_setup) blr _ENTRY(__restore_cpu_setup) blr #endif /* !defined(CONFIG_PPC_BOOK3S_32) */ /* * Load stuff into the MMU. Intended to be called with * IR=0 and DR=0. */ #ifdef CONFIG_KASAN early_hash_table: sync /* Force all PTE updates to finish */ isync tlbia /* Clear all TLB entries */ sync /* wait for tlbia/tlbie to finish */ TLBSYNC /* ... on all CPUs */ /* Load the SDR1 register (hash table base & size) */ lis r6, early_hash - PAGE_OFFSET@h ori r6, r6, 3 /* 256kB table */ mtspr SPRN_SDR1, r6 blr #endif load_up_mmu: sync /* Force all PTE updates to finish */ isync tlbia /* Clear all TLB entries */ sync /* wait for tlbia/tlbie to finish */ TLBSYNC /* ... on all CPUs */ /* Load the SDR1 register (hash table base & size) */ lis r6,_SDR1@ha tophys(r6,r6) lwz r6,_SDR1@l(r6) mtspr SPRN_SDR1,r6 /* Load the BAT registers with the values set up by MMU_init. MMU_init takes care of whether we're on a 601 or not. */ mfpvr r3 srwi r3,r3,16 cmpwi r3,1 lis r3,BATS@ha addi r3,r3,BATS@l tophys(r3,r3) LOAD_BAT(0,r3,r4,r5) LOAD_BAT(1,r3,r4,r5) LOAD_BAT(2,r3,r4,r5) LOAD_BAT(3,r3,r4,r5) BEGIN_MMU_FTR_SECTION LOAD_BAT(4,r3,r4,r5) LOAD_BAT(5,r3,r4,r5) LOAD_BAT(6,r3,r4,r5) LOAD_BAT(7,r3,r4,r5) END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) blr load_segment_registers: li r0, NUM_USER_SEGMENTS /* load up user segment register values */ mtctr r0 /* for context 0 */ li r3, 0 /* Kp = 0, Ks = 0, VSID = 0 */ #ifdef CONFIG_PPC_KUEP oris r3, r3, SR_NX@h /* Set Nx */ #endif #ifdef CONFIG_PPC_KUAP oris r3, r3, SR_KS@h /* Set Ks */ #endif li r4, 0 3: mtsrin r3, r4 addi r3, r3, 0x111 /* increment VSID */ addis r4, r4, 0x1000 /* address of next segment */ bdnz 3b li r0, 16 - NUM_USER_SEGMENTS /* load up kernel segment registers */ mtctr r0 /* for context 0 */ rlwinm r3, r3, 0, ~SR_NX /* Nx = 0 */ rlwinm r3, r3, 0, ~SR_KS /* Ks = 0 */ oris r3, r3, SR_KP@h /* Kp = 1 */ 3: mtsrin r3, r4 addi r3, r3, 0x111 /* increment VSID */ addis r4, r4, 0x1000 /* address of next segment */ bdnz 3b blr /* * This is where the main kernel code starts. */ start_here: /* ptr to current */ lis r2,init_task@h ori r2,r2,init_task@l /* Set up for using our exception vectors */ /* ptr to phys current thread */ tophys(r4,r2) addi r4,r4,THREAD /* init task's THREAD */ mtspr SPRN_SPRG_THREAD,r4 lis r4, (swapper_pg_dir - PAGE_OFFSET)@h ori r4, r4, (swapper_pg_dir - PAGE_OFFSET)@l mtspr SPRN_SPRG_PGDIR, r4 /* stack */ lis r1,init_thread_union@ha addi r1,r1,init_thread_union@l li r0,0 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) /* * Do early platform-specific initialization, * and set up the MMU. */ #ifdef CONFIG_KASAN bl kasan_early_init #endif li r3,0 mr r4,r31 bl machine_init bl __save_cpu_setup bl MMU_init BEGIN_MMU_FTR_SECTION bl MMU_init_hw_patch END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE) /* * Go back to running unmapped so we can load up new values * for SDR1 (hash table pointer) and the segment registers * and change to using our exception vectors. */ lis r4,2f@h ori r4,r4,2f@l tophys(r4,r4) li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR) mtspr SPRN_SRR0,r4 mtspr SPRN_SRR1,r3 SYNC RFI /* Load up the kernel context */ 2: bl load_up_mmu #ifdef CONFIG_BDI_SWITCH /* Add helper information for the Abatron bdiGDB debugger. * We do this here because we know the mmu is disabled, and * will be enabled for real in just a few instructions. */ lis r5, abatron_pteptrs@h ori r5, r5, abatron_pteptrs@l stw r5, 0xf0(r0) /* This much match your Abatron config */ lis r6, swapper_pg_dir@h ori r6, r6, swapper_pg_dir@l tophys(r5, r5) stw r6, 0(r5) #endif /* CONFIG_BDI_SWITCH */ /* Now turn on the MMU for real! */ li r4,MSR_KERNEL lis r3,start_kernel@h ori r3,r3,start_kernel@l mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 SYNC RFI /* * void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next); * * Set up the segment registers for a new context. */ _ENTRY(switch_mmu_context) lwz r3,MMCONTEXTID(r4) cmpwi cr0,r3,0 blt- 4f mulli r3,r3,897 /* multiply context by skew factor */ rlwinm r3,r3,4,8,27 /* VSID = (context & 0xfffff) << 4 */ #ifdef CONFIG_PPC_KUEP oris r3, r3, SR_NX@h /* Set Nx */ #endif #ifdef CONFIG_PPC_KUAP oris r3, r3, SR_KS@h /* Set Ks */ #endif li r0,NUM_USER_SEGMENTS mtctr r0 lwz r4, MM_PGD(r4) #ifdef CONFIG_BDI_SWITCH /* Context switch the PTE pointer for the Abatron BDI2000. * The PGDIR is passed as second argument. */ lis r5, abatron_pteptrs@ha stw r4, abatron_pteptrs@l + 0x4(r5) #endif tophys(r4, r4) mtspr SPRN_SPRG_PGDIR, r4 li r4,0 isync 3: mtsrin r3,r4 addi r3,r3,0x111 /* next VSID */ rlwinm r3,r3,0,8,3 /* clear out any overflow from VSID field */ addis r4,r4,0x1000 /* address of next segment */ bdnz 3b sync isync blr 4: trap EMIT_BUG_ENTRY 4b,__FILE__,__LINE__,0 blr EXPORT_SYMBOL(switch_mmu_context) /* * An undocumented "feature" of 604e requires that the v bit * be cleared before changing BAT values. * * Also, newer IBM firmware does not clear bat3 and 4 so * this makes sure it's done. * -- Cort */ clear_bats: li r10,0 mfspr r9,SPRN_PVR rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */ cmpwi r9, 1 beq 1f mtspr SPRN_DBAT0U,r10 mtspr SPRN_DBAT0L,r10 mtspr SPRN_DBAT1U,r10 mtspr SPRN_DBAT1L,r10 mtspr SPRN_DBAT2U,r10 mtspr SPRN_DBAT2L,r10 mtspr SPRN_DBAT3U,r10 mtspr SPRN_DBAT3L,r10 1: mtspr SPRN_IBAT0U,r10 mtspr SPRN_IBAT0L,r10 mtspr SPRN_IBAT1U,r10 mtspr SPRN_IBAT1L,r10 mtspr SPRN_IBAT2U,r10 mtspr SPRN_IBAT2L,r10 mtspr SPRN_IBAT3U,r10 mtspr SPRN_IBAT3L,r10 BEGIN_MMU_FTR_SECTION /* Here's a tweak: at this point, CPU setup have * not been called yet, so HIGH_BAT_EN may not be * set in HID0 for the 745x processors. However, it * seems that doesn't affect our ability to actually * write to these SPRs. */ mtspr SPRN_DBAT4U,r10 mtspr SPRN_DBAT4L,r10 mtspr SPRN_DBAT5U,r10 mtspr SPRN_DBAT5L,r10 mtspr SPRN_DBAT6U,r10 mtspr SPRN_DBAT6L,r10 mtspr SPRN_DBAT7U,r10 mtspr SPRN_DBAT7L,r10 mtspr SPRN_IBAT4U,r10 mtspr SPRN_IBAT4L,r10 mtspr SPRN_IBAT5U,r10 mtspr SPRN_IBAT5L,r10 mtspr SPRN_IBAT6U,r10 mtspr SPRN_IBAT6L,r10 mtspr SPRN_IBAT7U,r10 mtspr SPRN_IBAT7L,r10 END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) blr _ENTRY(update_bats) lis r4, 1f@h ori r4, r4, 1f@l tophys(r4, r4) mfmsr r6 mflr r7 li r3, MSR_KERNEL & ~(MSR_IR | MSR_DR) rlwinm r0, r6, 0, ~MSR_RI rlwinm r0, r0, 0, ~MSR_EE mtmsr r0 mtspr SPRN_SRR0, r4 mtspr SPRN_SRR1, r3 SYNC RFI 1: bl clear_bats lis r3, BATS@ha addi r3, r3, BATS@l tophys(r3, r3) LOAD_BAT(0, r3, r4, r5) LOAD_BAT(1, r3, r4, r5) LOAD_BAT(2, r3, r4, r5) LOAD_BAT(3, r3, r4, r5) BEGIN_MMU_FTR_SECTION LOAD_BAT(4, r3, r4, r5) LOAD_BAT(5, r3, r4, r5) LOAD_BAT(6, r3, r4, r5) LOAD_BAT(7, r3, r4, r5) END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) li r3, MSR_KERNEL & ~(MSR_IR | MSR_DR | MSR_RI) mtmsr r3 mtspr SPRN_SRR0, r7 mtspr SPRN_SRR1, r6 SYNC RFI flush_tlbs: lis r10, 0x40 1: addic. r10, r10, -0x1000 tlbie r10 bgt 1b sync blr mmu_off: addi r4, r3, __after_mmu_off - _start mfmsr r3 andi. r0,r3,MSR_DR|MSR_IR /* MMU enabled? */ beqlr andc r3,r3,r0 mtspr SPRN_SRR0,r4 mtspr SPRN_SRR1,r3 sync RFI /* * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET * (we keep one for debugging) and on others, we use one 256M BAT. */ initial_bats: lis r11,PAGE_OFFSET@h mfspr r9,SPRN_PVR rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */ cmpwi 0,r9,1 bne 4f ori r11,r11,4 /* set up BAT registers for 601 */ li r8,0x7f /* valid, block length = 8MB */ mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */ mtspr SPRN_IBAT0L,r8 /* lower BAT register */ addis r11,r11,0x800000@h addis r8,r8,0x800000@h mtspr SPRN_IBAT1U,r11 mtspr SPRN_IBAT1L,r8 addis r11,r11,0x800000@h addis r8,r8,0x800000@h mtspr SPRN_IBAT2U,r11 mtspr SPRN_IBAT2L,r8 isync blr 4: tophys(r8,r11) #ifdef CONFIG_SMP ori r8,r8,0x12 /* R/W access, M=1 */ #else ori r8,r8,2 /* R/W access */ #endif /* CONFIG_SMP */ ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */ mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */ mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */ mtspr SPRN_IBAT0L,r8 mtspr SPRN_IBAT0U,r11 isync blr #ifdef CONFIG_BOOTX_TEXT setup_disp_bat: /* * setup the display bat prepared for us in prom.c */ mflr r8 bl reloc_offset mtlr r8 addis r8,r3,disp_BAT@ha addi r8,r8,disp_BAT@l cmpwi cr0,r8,0 beqlr lwz r11,0(r8) lwz r8,4(r8) mfspr r9,SPRN_PVR rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */ cmpwi 0,r9,1 beq 1f mtspr SPRN_DBAT3L,r8 mtspr SPRN_DBAT3U,r11 blr 1: mtspr SPRN_IBAT3L,r8 mtspr SPRN_IBAT3U,r11 blr #endif /* CONFIG_BOOTX_TEXT */ #ifdef CONFIG_PPC_EARLY_DEBUG_CPM setup_cpm_bat: lis r8, 0xf000 ori r8, r8, 0x002a mtspr SPRN_DBAT1L, r8 lis r11, 0xf000 ori r11, r11, (BL_1M << 2) | 2 mtspr SPRN_DBAT1U, r11 blr #endif #ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO setup_usbgecko_bat: /* prepare a BAT for early io */ #if defined(CONFIG_GAMECUBE) lis r8, 0x0c00 #elif defined(CONFIG_WII) lis r8, 0x0d00 #else #error Invalid platform for USB Gecko based early debugging. #endif /* * The virtual address used must match the virtual address * associated to the fixmap entry FIX_EARLY_DEBUG_BASE. */ lis r11, 0xfffe /* top 128K */ ori r8, r8, 0x002a /* uncached, guarded ,rw */ ori r11, r11, 0x2 /* 128K, Vs=1, Vp=0 */ mtspr SPRN_DBAT1L, r8 mtspr SPRN_DBAT1U, r11 blr #endif #ifdef CONFIG_8260 /* Jump into the system reset for the rom. * We first disable the MMU, and then jump to the ROM reset address. * * r3 is the board info structure, r4 is the location for starting. * I use this for building a small kernel that can load other kernels, * rather than trying to write or rely on a rom monitor that can tftp load. */ .globl m8260_gorom m8260_gorom: mfmsr r0 rlwinm r0,r0,0,17,15 /* clear MSR_EE in r0 */ sync mtmsr r0 sync mfspr r11, SPRN_HID0 lis r10, 0 ori r10,r10,HID0_ICE|HID0_DCE andc r11, r11, r10 mtspr SPRN_HID0, r11 isync li r5, MSR_ME|MSR_RI lis r6,2f@h addis r6,r6,-KERNELBASE@h ori r6,r6,2f@l mtspr SPRN_SRR0,r6 mtspr SPRN_SRR1,r5 isync sync rfi 2: mtlr r4 blr #endif /* * We put a few things here that have to be page-aligned. * This stuff goes at the beginning of the data segment, * which is page-aligned. */ .data .globl sdata sdata: .globl empty_zero_page empty_zero_page: .space 4096 EXPORT_SYMBOL(empty_zero_page) .globl swapper_pg_dir swapper_pg_dir: .space PGD_TABLE_SIZE /* Room for two PTE pointers, usually the kernel and current user pointers * to their respective root page table. */ abatron_pteptrs: .space 8