// SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2019 MediaTek Inc. /* * Bluetooth support for MediaTek SDIO devices * * This file is written based on btsdio.c and btmtkuart.c. * * Author: Sean Wang * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "h4_recv.h" #define VERSION "0.1" #define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin" #define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin" struct btmtksdio_data { const char *fwname; }; static const struct btmtksdio_data mt7663_data = { .fwname = FIRMWARE_MT7663, }; static const struct btmtksdio_data mt7668_data = { .fwname = FIRMWARE_MT7668, }; static const struct sdio_device_id btmtksdio_table[] = { {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, 0x7663), .driver_data = (kernel_ulong_t)&mt7663_data }, {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, 0x7668), .driver_data = (kernel_ulong_t)&mt7668_data }, { } /* Terminating entry */ }; #define MTK_REG_CHLPCR 0x4 /* W1S */ #define C_INT_EN_SET BIT(0) #define C_INT_EN_CLR BIT(1) #define C_FW_OWN_REQ_SET BIT(8) #define C_FW_OWN_REQ_CLR BIT(9) #define MTK_REG_CSDIOCSR 0x8 #define SDIO_RE_INIT_EN BIT(0) #define SDIO_INT_CTL BIT(2) #define MTK_REG_CHCR 0xc #define C_INT_CLR_CTRL BIT(1) /* CHISR have the same bits field definition with CHIER */ #define MTK_REG_CHISR 0x10 #define MTK_REG_CHIER 0x14 #define FW_OWN_BACK_INT BIT(0) #define RX_DONE_INT BIT(1) #define TX_EMPTY BIT(2) #define TX_FIFO_OVERFLOW BIT(8) #define RX_PKT_LEN GENMASK(31, 16) #define MTK_REG_CTDR 0x18 #define MTK_REG_CRDR 0x1c #define MTK_SDIO_BLOCK_SIZE 256 #define BTMTKSDIO_TX_WAIT_VND_EVT 1 enum { MTK_WMT_PATCH_DWNLD = 0x1, MTK_WMT_TEST = 0x2, MTK_WMT_WAKEUP = 0x3, MTK_WMT_HIF = 0x4, MTK_WMT_FUNC_CTRL = 0x6, MTK_WMT_RST = 0x7, MTK_WMT_SEMAPHORE = 0x17, }; enum { BTMTK_WMT_INVALID, BTMTK_WMT_PATCH_UNDONE, BTMTK_WMT_PATCH_DONE, BTMTK_WMT_ON_UNDONE, BTMTK_WMT_ON_DONE, BTMTK_WMT_ON_PROGRESS, }; struct mtkbtsdio_hdr { __le16 len; __le16 reserved; u8 bt_type; } __packed; struct mtk_wmt_hdr { u8 dir; u8 op; __le16 dlen; u8 flag; } __packed; struct mtk_hci_wmt_cmd { struct mtk_wmt_hdr hdr; u8 data[256]; } __packed; struct btmtk_hci_wmt_evt { struct hci_event_hdr hhdr; struct mtk_wmt_hdr whdr; } __packed; struct btmtk_hci_wmt_evt_funcc { struct btmtk_hci_wmt_evt hwhdr; __be16 status; } __packed; struct btmtk_tci_sleep { u8 mode; __le16 duration; __le16 host_duration; u8 host_wakeup_pin; u8 time_compensation; } __packed; struct btmtk_hci_wmt_params { u8 op; u8 flag; u16 dlen; const void *data; u32 *status; }; struct btmtksdio_dev { struct hci_dev *hdev; struct sdio_func *func; struct work_struct tx_work; unsigned long tx_state; struct sk_buff_head txq; struct sk_buff *evt_skb; const struct btmtksdio_data *data; }; static int mtk_hci_wmt_sync(struct hci_dev *hdev, struct btmtk_hci_wmt_params *wmt_params) { struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc; u32 hlen, status = BTMTK_WMT_INVALID; struct btmtk_hci_wmt_evt *wmt_evt; struct mtk_hci_wmt_cmd wc; struct mtk_wmt_hdr *hdr; int err; hlen = sizeof(*hdr) + wmt_params->dlen; if (hlen > 255) return -EINVAL; hdr = (struct mtk_wmt_hdr *)&wc; hdr->dir = 1; hdr->op = wmt_params->op; hdr->dlen = cpu_to_le16(wmt_params->dlen + 1); hdr->flag = wmt_params->flag; memcpy(wc.data, wmt_params->data, wmt_params->dlen); set_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state); err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc); if (err < 0) { clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state); return err; } /* The vendor specific WMT commands are all answered by a vendor * specific event and will not have the Command Status or Command * Complete as with usual HCI command flow control. * * After sending the command, wait for BTMTKSDIO_TX_WAIT_VND_EVT * state to be cleared. The driver specific event receive routine * will clear that state and with that indicate completion of the * WMT command. */ err = wait_on_bit_timeout(&bdev->tx_state, BTMTKSDIO_TX_WAIT_VND_EVT, TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT); if (err == -EINTR) { bt_dev_err(hdev, "Execution of wmt command interrupted"); clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state); return err; } if (err) { bt_dev_err(hdev, "Execution of wmt command timed out"); clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state); return -ETIMEDOUT; } /* Parse and handle the return WMT event */ wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data; if (wmt_evt->whdr.op != hdr->op) { bt_dev_err(hdev, "Wrong op received %d expected %d", wmt_evt->whdr.op, hdr->op); err = -EIO; goto err_free_skb; } switch (wmt_evt->whdr.op) { case MTK_WMT_SEMAPHORE: if (wmt_evt->whdr.flag == 2) status = BTMTK_WMT_PATCH_UNDONE; else status = BTMTK_WMT_PATCH_DONE; break; case MTK_WMT_FUNC_CTRL: wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt; if (be16_to_cpu(wmt_evt_funcc->status) == 0x404) status = BTMTK_WMT_ON_DONE; else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420) status = BTMTK_WMT_ON_PROGRESS; else status = BTMTK_WMT_ON_UNDONE; break; } if (wmt_params->status) *wmt_params->status = status; err_free_skb: kfree_skb(bdev->evt_skb); bdev->evt_skb = NULL; return err; } static int btmtksdio_tx_packet(struct btmtksdio_dev *bdev, struct sk_buff *skb) { struct mtkbtsdio_hdr *sdio_hdr; int err; /* Make sure that there are enough rooms for SDIO header */ if (unlikely(skb_headroom(skb) < sizeof(*sdio_hdr))) { err = pskb_expand_head(skb, sizeof(*sdio_hdr), 0, GFP_ATOMIC); if (err < 0) return err; } /* Prepend MediaTek SDIO Specific Header */ skb_push(skb, sizeof(*sdio_hdr)); sdio_hdr = (void *)skb->data; sdio_hdr->len = cpu_to_le16(skb->len); sdio_hdr->reserved = cpu_to_le16(0); sdio_hdr->bt_type = hci_skb_pkt_type(skb); err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data, round_up(skb->len, MTK_SDIO_BLOCK_SIZE)); if (err < 0) goto err_skb_pull; bdev->hdev->stat.byte_tx += skb->len; kfree_skb(skb); return 0; err_skb_pull: skb_pull(skb, sizeof(*sdio_hdr)); return err; } static u32 btmtksdio_drv_own_query(struct btmtksdio_dev *bdev) { return sdio_readl(bdev->func, MTK_REG_CHLPCR, NULL); } static void btmtksdio_tx_work(struct work_struct *work) { struct btmtksdio_dev *bdev = container_of(work, struct btmtksdio_dev, tx_work); struct sk_buff *skb; int err; sdio_claim_host(bdev->func); while ((skb = skb_dequeue(&bdev->txq))) { err = btmtksdio_tx_packet(bdev, skb); if (err < 0) { bdev->hdev->stat.err_tx++; skb_queue_head(&bdev->txq, skb); break; } } sdio_release_host(bdev->func); } static int btmtksdio_recv_event(struct hci_dev *hdev, struct sk_buff *skb) { struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); struct hci_event_hdr *hdr = (void *)skb->data; int err; /* Fix up the vendor event id with 0xff for vendor specific instead * of 0xe4 so that event send via monitoring socket can be parsed * properly. */ if (hdr->evt == 0xe4) hdr->evt = HCI_EV_VENDOR; /* When someone waits for the WMT event, the skb is being cloned * and being processed the events from there then. */ if (test_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state)) { bdev->evt_skb = skb_clone(skb, GFP_KERNEL); if (!bdev->evt_skb) { err = -ENOMEM; goto err_out; } } err = hci_recv_frame(hdev, skb); if (err < 0) goto err_free_skb; if (hdr->evt == HCI_EV_VENDOR) { if (test_and_clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state)) { /* Barrier to sync with other CPUs */ smp_mb__after_atomic(); wake_up_bit(&bdev->tx_state, BTMTKSDIO_TX_WAIT_VND_EVT); } } return 0; err_free_skb: kfree_skb(bdev->evt_skb); bdev->evt_skb = NULL; err_out: return err; } static const struct h4_recv_pkt mtk_recv_pkts[] = { { H4_RECV_ACL, .recv = hci_recv_frame }, { H4_RECV_SCO, .recv = hci_recv_frame }, { H4_RECV_EVENT, .recv = btmtksdio_recv_event }, }; static int btmtksdio_rx_packet(struct btmtksdio_dev *bdev, u16 rx_size) { const struct h4_recv_pkt *pkts = mtk_recv_pkts; int pkts_count = ARRAY_SIZE(mtk_recv_pkts); struct mtkbtsdio_hdr *sdio_hdr; int err, i, pad_size; struct sk_buff *skb; u16 dlen; if (rx_size < sizeof(*sdio_hdr)) return -EILSEQ; /* A SDIO packet is exactly containing a Bluetooth packet */ skb = bt_skb_alloc(rx_size, GFP_KERNEL); if (!skb) return -ENOMEM; skb_put(skb, rx_size); err = sdio_readsb(bdev->func, skb->data, MTK_REG_CRDR, rx_size); if (err < 0) goto err_kfree_skb; bdev->hdev->stat.byte_rx += rx_size; sdio_hdr = (void *)skb->data; /* We assume the default error as -EILSEQ simply to make the error path * be cleaner. */ err = -EILSEQ; if (rx_size != le16_to_cpu(sdio_hdr->len)) { bt_dev_err(bdev->hdev, "Rx size in sdio header is mismatched "); goto err_kfree_skb; } hci_skb_pkt_type(skb) = sdio_hdr->bt_type; /* Remove MediaTek SDIO header */ skb_pull(skb, sizeof(*sdio_hdr)); /* We have to dig into the packet to get payload size and then know how * many padding bytes at the tail, these padding bytes should be removed * before the packet is indicated to the core layer. */ for (i = 0; i < pkts_count; i++) { if (sdio_hdr->bt_type == (&pkts[i])->type) break; } if (i >= pkts_count) { bt_dev_err(bdev->hdev, "Invalid bt type 0x%02x", sdio_hdr->bt_type); goto err_kfree_skb; } /* Remaining bytes cannot hold a header*/ if (skb->len < (&pkts[i])->hlen) { bt_dev_err(bdev->hdev, "The size of bt header is mismatched"); goto err_kfree_skb; } switch ((&pkts[i])->lsize) { case 1: dlen = skb->data[(&pkts[i])->loff]; break; case 2: dlen = get_unaligned_le16(skb->data + (&pkts[i])->loff); break; default: goto err_kfree_skb; } pad_size = skb->len - (&pkts[i])->hlen - dlen; /* Remaining bytes cannot hold a payload */ if (pad_size < 0) { bt_dev_err(bdev->hdev, "The size of bt payload is mismatched"); goto err_kfree_skb; } /* Remove padding bytes */ skb_trim(skb, skb->len - pad_size); /* Complete frame */ (&pkts[i])->recv(bdev->hdev, skb); return 0; err_kfree_skb: kfree_skb(skb); return err; } static void btmtksdio_interrupt(struct sdio_func *func) { struct btmtksdio_dev *bdev = sdio_get_drvdata(func); u32 int_status; u16 rx_size; /* Disable interrupt */ sdio_writel(func, C_INT_EN_CLR, MTK_REG_CHLPCR, 0); int_status = sdio_readl(func, MTK_REG_CHISR, NULL); /* Ack an interrupt as soon as possible before any operation on * hardware. * * Note that we don't ack any status during operations to avoid race * condition between the host and the device such as it's possible to * mistakenly ack RX_DONE for the next packet and then cause interrupts * not be raised again but there is still pending data in the hardware * FIFO. */ sdio_writel(func, int_status, MTK_REG_CHISR, NULL); if (unlikely(!int_status)) bt_dev_err(bdev->hdev, "CHISR is 0\n"); if (int_status & FW_OWN_BACK_INT) bt_dev_dbg(bdev->hdev, "Get fw own back\n"); if (int_status & TX_EMPTY) schedule_work(&bdev->tx_work); else if (unlikely(int_status & TX_FIFO_OVERFLOW)) bt_dev_warn(bdev->hdev, "Tx fifo overflow\n"); if (int_status & RX_DONE_INT) { rx_size = (int_status & RX_PKT_LEN) >> 16; if (btmtksdio_rx_packet(bdev, rx_size) < 0) bdev->hdev->stat.err_rx++; } /* Enable interrupt */ sdio_writel(func, C_INT_EN_SET, MTK_REG_CHLPCR, 0); } static int btmtksdio_open(struct hci_dev *hdev) { struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); int err; u32 status; sdio_claim_host(bdev->func); err = sdio_enable_func(bdev->func); if (err < 0) goto err_release_host; /* Get ownership from the device */ sdio_writel(bdev->func, C_FW_OWN_REQ_CLR, MTK_REG_CHLPCR, &err); if (err < 0) goto err_disable_func; err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status, status & C_FW_OWN_REQ_SET, 2000, 1000000); if (err < 0) { bt_dev_err(bdev->hdev, "Cannot get ownership from device"); goto err_disable_func; } /* Disable interrupt & mask out all interrupt sources */ sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, &err); if (err < 0) goto err_disable_func; sdio_writel(bdev->func, 0, MTK_REG_CHIER, &err); if (err < 0) goto err_disable_func; err = sdio_claim_irq(bdev->func, btmtksdio_interrupt); if (err < 0) goto err_disable_func; err = sdio_set_block_size(bdev->func, MTK_SDIO_BLOCK_SIZE); if (err < 0) goto err_release_irq; /* SDIO CMD 5 allows the SDIO device back to idle state an * synchronous interrupt is supported in SDIO 4-bit mode */ sdio_writel(bdev->func, SDIO_INT_CTL | SDIO_RE_INIT_EN, MTK_REG_CSDIOCSR, &err); if (err < 0) goto err_release_irq; /* Setup write-1-clear for CHISR register */ sdio_writel(bdev->func, C_INT_CLR_CTRL, MTK_REG_CHCR, &err); if (err < 0) goto err_release_irq; /* Setup interrupt sources */ sdio_writel(bdev->func, RX_DONE_INT | TX_EMPTY | TX_FIFO_OVERFLOW, MTK_REG_CHIER, &err); if (err < 0) goto err_release_irq; /* Enable interrupt */ sdio_writel(bdev->func, C_INT_EN_SET, MTK_REG_CHLPCR, &err); if (err < 0) goto err_release_irq; sdio_release_host(bdev->func); return 0; err_release_irq: sdio_release_irq(bdev->func); err_disable_func: sdio_disable_func(bdev->func); err_release_host: sdio_release_host(bdev->func); return err; } static int btmtksdio_close(struct hci_dev *hdev) { struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); u32 status; int err; sdio_claim_host(bdev->func); /* Disable interrupt */ sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, NULL); sdio_release_irq(bdev->func); /* Return ownership to the device */ sdio_writel(bdev->func, C_FW_OWN_REQ_SET, MTK_REG_CHLPCR, NULL); err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status, !(status & C_FW_OWN_REQ_SET), 2000, 1000000); if (err < 0) bt_dev_err(bdev->hdev, "Cannot return ownership to device"); sdio_disable_func(bdev->func); sdio_release_host(bdev->func); return 0; } static int btmtksdio_flush(struct hci_dev *hdev) { struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); skb_queue_purge(&bdev->txq); cancel_work_sync(&bdev->tx_work); return 0; } static int btmtksdio_func_query(struct hci_dev *hdev) { struct btmtk_hci_wmt_params wmt_params; int status, err; u8 param = 0; /* Query whether the function is enabled */ wmt_params.op = MTK_WMT_FUNC_CTRL; wmt_params.flag = 4; wmt_params.dlen = sizeof(param); wmt_params.data = ¶m; wmt_params.status = &status; err = mtk_hci_wmt_sync(hdev, &wmt_params); if (err < 0) { bt_dev_err(hdev, "Failed to query function status (%d)", err); return err; } return status; } static int mtk_setup_firmware(struct hci_dev *hdev, const char *fwname) { struct btmtk_hci_wmt_params wmt_params; const struct firmware *fw; const u8 *fw_ptr; size_t fw_size; int err, dlen; u8 flag; err = request_firmware(&fw, fwname, &hdev->dev); if (err < 0) { bt_dev_err(hdev, "Failed to load firmware file (%d)", err); return err; } fw_ptr = fw->data; fw_size = fw->size; /* The size of patch header is 30 bytes, should be skip */ if (fw_size < 30) { err = -EINVAL; goto free_fw; } fw_size -= 30; fw_ptr += 30; flag = 1; wmt_params.op = MTK_WMT_PATCH_DWNLD; wmt_params.status = NULL; while (fw_size > 0) { dlen = min_t(int, 250, fw_size); /* Tell device the position in sequence */ if (fw_size - dlen <= 0) flag = 3; else if (fw_size < fw->size - 30) flag = 2; wmt_params.flag = flag; wmt_params.dlen = dlen; wmt_params.data = fw_ptr; err = mtk_hci_wmt_sync(hdev, &wmt_params); if (err < 0) { bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)", err); goto free_fw; } fw_size -= dlen; fw_ptr += dlen; } wmt_params.op = MTK_WMT_RST; wmt_params.flag = 4; wmt_params.dlen = 0; wmt_params.data = NULL; wmt_params.status = NULL; /* Activate funciton the firmware providing to */ err = mtk_hci_wmt_sync(hdev, &wmt_params); if (err < 0) { bt_dev_err(hdev, "Failed to send wmt rst (%d)", err); goto free_fw; } /* Wait a few moments for firmware activation done */ usleep_range(10000, 12000); free_fw: release_firmware(fw); return err; } static int btmtksdio_setup(struct hci_dev *hdev) { struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); struct btmtk_hci_wmt_params wmt_params; ktime_t calltime, delta, rettime; struct btmtk_tci_sleep tci_sleep; unsigned long long duration; struct sk_buff *skb; int err, status; u8 param = 0x1; calltime = ktime_get(); /* Query whether the firmware is already download */ wmt_params.op = MTK_WMT_SEMAPHORE; wmt_params.flag = 1; wmt_params.dlen = 0; wmt_params.data = NULL; wmt_params.status = &status; err = mtk_hci_wmt_sync(hdev, &wmt_params); if (err < 0) { bt_dev_err(hdev, "Failed to query firmware status (%d)", err); return err; } if (status == BTMTK_WMT_PATCH_DONE) { bt_dev_info(hdev, "Firmware already downloaded"); goto ignore_setup_fw; } /* Setup a firmware which the device definitely requires */ err = mtk_setup_firmware(hdev, bdev->data->fwname); if (err < 0) return err; ignore_setup_fw: /* Query whether the device is already enabled */ err = readx_poll_timeout(btmtksdio_func_query, hdev, status, status < 0 || status != BTMTK_WMT_ON_PROGRESS, 2000, 5000000); /* -ETIMEDOUT happens */ if (err < 0) return err; /* The other errors happen in btusb_mtk_func_query */ if (status < 0) return status; if (status == BTMTK_WMT_ON_DONE) { bt_dev_info(hdev, "function already on"); goto ignore_func_on; } /* Enable Bluetooth protocol */ wmt_params.op = MTK_WMT_FUNC_CTRL; wmt_params.flag = 0; wmt_params.dlen = sizeof(param); wmt_params.data = ¶m; wmt_params.status = NULL; err = mtk_hci_wmt_sync(hdev, &wmt_params); if (err < 0) { bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); return err; } ignore_func_on: /* Apply the low power environment setup */ tci_sleep.mode = 0x5; tci_sleep.duration = cpu_to_le16(0x640); tci_sleep.host_duration = cpu_to_le16(0x640); tci_sleep.host_wakeup_pin = 0; tci_sleep.time_compensation = 0; skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { err = PTR_ERR(skb); bt_dev_err(hdev, "Failed to apply low power setting (%d)", err); return err; } kfree_skb(skb); rettime = ktime_get(); delta = ktime_sub(rettime, calltime); duration = (unsigned long long)ktime_to_ns(delta) >> 10; bt_dev_info(hdev, "Device setup in %llu usecs", duration); return 0; } static int btmtksdio_shutdown(struct hci_dev *hdev) { struct btmtk_hci_wmt_params wmt_params; u8 param = 0x0; int err; /* Disable the device */ wmt_params.op = MTK_WMT_FUNC_CTRL; wmt_params.flag = 0; wmt_params.dlen = sizeof(param); wmt_params.data = ¶m; wmt_params.status = NULL; err = mtk_hci_wmt_sync(hdev, &wmt_params); if (err < 0) { bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); return err; } return 0; } static int btmtksdio_send_frame(struct hci_dev *hdev, struct sk_buff *skb) { struct btmtksdio_dev *bdev = hci_get_drvdata(hdev); switch (hci_skb_pkt_type(skb)) { case HCI_COMMAND_PKT: hdev->stat.cmd_tx++; break; case HCI_ACLDATA_PKT: hdev->stat.acl_tx++; break; case HCI_SCODATA_PKT: hdev->stat.sco_tx++; break; default: return -EILSEQ; } skb_queue_tail(&bdev->txq, skb); schedule_work(&bdev->tx_work); return 0; } static int btmtksdio_probe(struct sdio_func *func, const struct sdio_device_id *id) { struct btmtksdio_dev *bdev; struct hci_dev *hdev; int err; bdev = devm_kzalloc(&func->dev, sizeof(*bdev), GFP_KERNEL); if (!bdev) return -ENOMEM; bdev->data = (void *)id->driver_data; if (!bdev->data) return -ENODEV; bdev->func = func; INIT_WORK(&bdev->tx_work, btmtksdio_tx_work); skb_queue_head_init(&bdev->txq); /* Initialize and register HCI device */ hdev = hci_alloc_dev(); if (!hdev) { dev_err(&func->dev, "Can't allocate HCI device\n"); return -ENOMEM; } bdev->hdev = hdev; hdev->bus = HCI_SDIO; hci_set_drvdata(hdev, bdev); hdev->open = btmtksdio_open; hdev->close = btmtksdio_close; hdev->flush = btmtksdio_flush; hdev->setup = btmtksdio_setup; hdev->shutdown = btmtksdio_shutdown; hdev->send = btmtksdio_send_frame; SET_HCIDEV_DEV(hdev, &func->dev); hdev->manufacturer = 70; set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks); err = hci_register_dev(hdev); if (err < 0) { dev_err(&func->dev, "Can't register HCI device\n"); hci_free_dev(hdev); return err; } sdio_set_drvdata(func, bdev); return 0; } static void btmtksdio_remove(struct sdio_func *func) { struct btmtksdio_dev *bdev = sdio_get_drvdata(func); struct hci_dev *hdev; if (!bdev) return; hdev = bdev->hdev; sdio_set_drvdata(func, NULL); hci_unregister_dev(hdev); hci_free_dev(hdev); } static struct sdio_driver btmtksdio_driver = { .name = "btmtksdio", .probe = btmtksdio_probe, .remove = btmtksdio_remove, .id_table = btmtksdio_table, }; module_sdio_driver(btmtksdio_driver); MODULE_AUTHOR("Sean Wang "); MODULE_DESCRIPTION("MediaTek Bluetooth SDIO driver ver " VERSION); MODULE_VERSION(VERSION); MODULE_LICENSE("GPL"); MODULE_FIRMWARE(FIRMWARE_MT7663); MODULE_FIRMWARE(FIRMWARE_MT7668);