// SPDX-License-Identifier: GPL-2.0 // // MCP16502 PMIC driver // // Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries // // Author: Andrei Stefanescu // // Inspired from tps65086-regulator.c #include #include #include #include #include #include #include #include #include #include #define VDD_LOW_SEL 0x0D #define VDD_HIGH_SEL 0x3F #define MCP16502_FLT BIT(7) #define MCP16502_ENS BIT(0) /* * The PMIC has four sets of registers corresponding to four power modes: * Performance, Active, Low-power, Hibernate. * * Registers: * Each regulator has a register for each power mode. To access a register * for a specific regulator and mode BASE_* and OFFSET_* need to be added. * * Operating modes: * In order for the PMIC to transition to operating modes it has to be * controlled via GPIO lines called LPM and HPM. * * The registers are fully configurable such that you can put all regulators in * a low-power state while the PMIC is in Active mode. They are supposed to be * configured at startup and then simply transition to/from a global low-power * state by setting the GPIO lpm pin high/low. * * This driver keeps the PMIC in Active mode, Low-power state is set for the * regulators by enabling/disabling operating mode (FPWM or Auto PFM). * * The PMIC's Low-power and Hibernate modes are used during standby/suspend. * To enter standby/suspend the PMIC will go to Low-power mode. From there, it * will transition to Hibernate when the PWRHLD line is set to low by the MPU. */ /* * This function is useful for iterating over all regulators and accessing their * registers in a generic way or accessing a regulator device by its id. */ #define MCP16502_BASE(i) (((i) + 1) << 4) #define MCP16502_STAT_BASE(i) ((i) + 5) #define MCP16502_OFFSET_MODE_A 0 #define MCP16502_OFFSET_MODE_LPM 1 #define MCP16502_OFFSET_MODE_HIB 2 #define MCP16502_OPMODE_ACTIVE REGULATOR_MODE_NORMAL #define MCP16502_OPMODE_LPM REGULATOR_MODE_IDLE #define MCP16502_OPMODE_HIB REGULATOR_MODE_STANDBY #define MCP16502_MODE_AUTO_PFM 0 #define MCP16502_MODE_FPWM BIT(6) #define MCP16502_VSEL 0x3F #define MCP16502_EN BIT(7) #define MCP16502_MODE BIT(6) #define MCP16502_MIN_REG 0x0 #define MCP16502_MAX_REG 0x65 static unsigned int mcp16502_of_map_mode(unsigned int mode) { if (mode == REGULATOR_MODE_NORMAL || mode == REGULATOR_MODE_IDLE) return mode; return REGULATOR_MODE_INVALID; } #define MCP16502_REGULATOR(_name, _id, _ranges, _ops) \ [_id] = { \ .name = _name, \ .regulators_node = of_match_ptr("regulators"), \ .id = _id, \ .ops = &(_ops), \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ .n_voltages = MCP16502_VSEL + 1, \ .linear_ranges = _ranges, \ .n_linear_ranges = ARRAY_SIZE(_ranges), \ .of_match = of_match_ptr(_name), \ .of_map_mode = mcp16502_of_map_mode, \ .vsel_reg = (((_id) + 1) << 4), \ .vsel_mask = MCP16502_VSEL, \ .enable_reg = (((_id) + 1) << 4), \ .enable_mask = MCP16502_EN, \ } enum { BUCK1 = 0, BUCK2, BUCK3, BUCK4, LDO1, LDO2, NUM_REGULATORS }; /* * struct mcp16502 - PMIC representation * @rdev: the regulators belonging to this chip * @rmap: regmap to be used for I2C communication * @lpm: LPM GPIO descriptor */ struct mcp16502 { struct gpio_desc *lpm; }; /* * mcp16502_gpio_set_mode() - set the GPIO corresponding value * * Used to prepare transitioning into hibernate or resuming from it. */ static void mcp16502_gpio_set_mode(struct mcp16502 *mcp, int mode) { switch (mode) { case MCP16502_OPMODE_ACTIVE: gpiod_set_value(mcp->lpm, 0); break; case MCP16502_OPMODE_LPM: case MCP16502_OPMODE_HIB: gpiod_set_value(mcp->lpm, 1); break; default: pr_err("%s: %d invalid\n", __func__, mode); } } /* * mcp16502_get_reg() - get the PMIC's configuration register for opmode * * @rdev: the regulator whose register we are searching * @opmode: the PMIC's operating mode ACTIVE, Low-power, Hibernate */ static int mcp16502_get_reg(struct regulator_dev *rdev, int opmode) { int reg = MCP16502_BASE(rdev_get_id(rdev)); switch (opmode) { case MCP16502_OPMODE_ACTIVE: return reg + MCP16502_OFFSET_MODE_A; case MCP16502_OPMODE_LPM: return reg + MCP16502_OFFSET_MODE_LPM; case MCP16502_OPMODE_HIB: return reg + MCP16502_OFFSET_MODE_HIB; default: return -EINVAL; } } /* * mcp16502_get_mode() - return the current operating mode of a regulator * * Note: all functions that are not part of entering/exiting standby/suspend * use the Active mode registers. * * Note: this is different from the PMIC's operatig mode, it is the * MODE bit from the regulator's register. */ static unsigned int mcp16502_get_mode(struct regulator_dev *rdev) { unsigned int val; int ret, reg; reg = mcp16502_get_reg(rdev, MCP16502_OPMODE_ACTIVE); if (reg < 0) return reg; ret = regmap_read(rdev->regmap, reg, &val); if (ret) return ret; switch (val & MCP16502_MODE) { case MCP16502_MODE_FPWM: return REGULATOR_MODE_NORMAL; case MCP16502_MODE_AUTO_PFM: return REGULATOR_MODE_IDLE; default: return REGULATOR_MODE_INVALID; } } /* * _mcp16502_set_mode() - helper for set_mode and set_suspend_mode * * @rdev: the regulator for which we are setting the mode * @mode: the regulator's mode (the one from MODE bit) * @opmode: the PMIC's operating mode: Active/Low-power/Hibernate */ static int _mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode, unsigned int op_mode) { int val; int reg; reg = mcp16502_get_reg(rdev, op_mode); if (reg < 0) return reg; switch (mode) { case REGULATOR_MODE_NORMAL: val = MCP16502_MODE_FPWM; break; case REGULATOR_MODE_IDLE: val = MCP16502_MODE_AUTO_PFM; break; default: return -EINVAL; } reg = regmap_update_bits(rdev->regmap, reg, MCP16502_MODE, val); return reg; } /* * mcp16502_set_mode() - regulator_ops set_mode */ static int mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode) { return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_ACTIVE); } /* * mcp16502_get_status() - regulator_ops get_status */ static int mcp16502_get_status(struct regulator_dev *rdev) { int ret; unsigned int val; ret = regmap_read(rdev->regmap, MCP16502_STAT_BASE(rdev_get_id(rdev)), &val); if (ret) return ret; if (val & MCP16502_FLT) return REGULATOR_STATUS_ERROR; else if (val & MCP16502_ENS) return REGULATOR_STATUS_ON; else if (!(val & MCP16502_ENS)) return REGULATOR_STATUS_OFF; return REGULATOR_STATUS_UNDEFINED; } #ifdef CONFIG_SUSPEND /* * mcp16502_suspend_get_target_reg() - get the reg of the target suspend PMIC * mode */ static int mcp16502_suspend_get_target_reg(struct regulator_dev *rdev) { switch (pm_suspend_target_state) { case PM_SUSPEND_STANDBY: return mcp16502_get_reg(rdev, MCP16502_OPMODE_LPM); case PM_SUSPEND_ON: case PM_SUSPEND_MEM: return mcp16502_get_reg(rdev, MCP16502_OPMODE_HIB); default: dev_err(&rdev->dev, "invalid suspend target: %d\n", pm_suspend_target_state); } return -EINVAL; } /* * mcp16502_set_suspend_voltage() - regulator_ops set_suspend_voltage */ static int mcp16502_set_suspend_voltage(struct regulator_dev *rdev, int uV) { int sel = regulator_map_voltage_linear_range(rdev, uV, uV); int reg = mcp16502_suspend_get_target_reg(rdev); if (sel < 0) return sel; if (reg < 0) return reg; return regmap_update_bits(rdev->regmap, reg, MCP16502_VSEL, sel); } /* * mcp16502_set_suspend_mode() - regulator_ops set_suspend_mode */ static int mcp16502_set_suspend_mode(struct regulator_dev *rdev, unsigned int mode) { switch (pm_suspend_target_state) { case PM_SUSPEND_STANDBY: return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_LPM); case PM_SUSPEND_ON: case PM_SUSPEND_MEM: return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_HIB); default: dev_err(&rdev->dev, "invalid suspend target: %d\n", pm_suspend_target_state); } return -EINVAL; } /* * mcp16502_set_suspend_enable() - regulator_ops set_suspend_enable */ static int mcp16502_set_suspend_enable(struct regulator_dev *rdev) { int reg = mcp16502_suspend_get_target_reg(rdev); if (reg < 0) return reg; return regmap_update_bits(rdev->regmap, reg, MCP16502_EN, MCP16502_EN); } /* * mcp16502_set_suspend_disable() - regulator_ops set_suspend_disable */ static int mcp16502_set_suspend_disable(struct regulator_dev *rdev) { int reg = mcp16502_suspend_get_target_reg(rdev); if (reg < 0) return reg; return regmap_update_bits(rdev->regmap, reg, MCP16502_EN, 0); } #endif /* CONFIG_SUSPEND */ static const struct regulator_ops mcp16502_buck_ops = { .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .get_status = mcp16502_get_status, .set_mode = mcp16502_set_mode, .get_mode = mcp16502_get_mode, #ifdef CONFIG_SUSPEND .set_suspend_voltage = mcp16502_set_suspend_voltage, .set_suspend_mode = mcp16502_set_suspend_mode, .set_suspend_enable = mcp16502_set_suspend_enable, .set_suspend_disable = mcp16502_set_suspend_disable, #endif /* CONFIG_SUSPEND */ }; /* * LDOs cannot change operating modes. */ static const struct regulator_ops mcp16502_ldo_ops = { .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .get_status = mcp16502_get_status, #ifdef CONFIG_SUSPEND .set_suspend_voltage = mcp16502_set_suspend_voltage, .set_suspend_enable = mcp16502_set_suspend_enable, .set_suspend_disable = mcp16502_set_suspend_disable, #endif /* CONFIG_SUSPEND */ }; static const struct of_device_id mcp16502_ids[] = { { .compatible = "microchip,mcp16502", }, {} }; MODULE_DEVICE_TABLE(of, mcp16502_ids); static const struct regulator_linear_range b1l12_ranges[] = { REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000), }; static const struct regulator_linear_range b234_ranges[] = { REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000), }; static const struct regulator_desc mcp16502_desc[] = { /* MCP16502_REGULATOR(_name, _id, ranges, regulator_ops) */ MCP16502_REGULATOR("VDD_IO", BUCK1, b1l12_ranges, mcp16502_buck_ops), MCP16502_REGULATOR("VDD_DDR", BUCK2, b234_ranges, mcp16502_buck_ops), MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops), MCP16502_REGULATOR("VDD_OTHER", BUCK4, b234_ranges, mcp16502_buck_ops), MCP16502_REGULATOR("LDO1", LDO1, b1l12_ranges, mcp16502_ldo_ops), MCP16502_REGULATOR("LDO2", LDO2, b1l12_ranges, mcp16502_ldo_ops) }; static const struct regmap_range mcp16502_ranges[] = { regmap_reg_range(MCP16502_MIN_REG, MCP16502_MAX_REG) }; static const struct regmap_access_table mcp16502_yes_reg_table = { .yes_ranges = mcp16502_ranges, .n_yes_ranges = ARRAY_SIZE(mcp16502_ranges), }; static const struct regmap_config mcp16502_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = MCP16502_MAX_REG, .cache_type = REGCACHE_NONE, .rd_table = &mcp16502_yes_reg_table, .wr_table = &mcp16502_yes_reg_table, }; /* * set_up_regulators() - initialize all regulators */ static int setup_regulators(struct mcp16502 *mcp, struct device *dev, struct regulator_config config) { struct regulator_dev *rdev; int i; for (i = 0; i < NUM_REGULATORS; i++) { rdev = devm_regulator_register(dev, &mcp16502_desc[i], &config); if (IS_ERR(rdev)) { dev_err(dev, "failed to register %s regulator %ld\n", mcp16502_desc[i].name, PTR_ERR(rdev)); return PTR_ERR(rdev); } } return 0; } static int mcp16502_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct regulator_config config = { }; struct device *dev; struct mcp16502 *mcp; struct regmap *rmap; int ret = 0; dev = &client->dev; config.dev = dev; mcp = devm_kzalloc(dev, sizeof(*mcp), GFP_KERNEL); if (!mcp) return -ENOMEM; rmap = devm_regmap_init_i2c(client, &mcp16502_regmap_config); if (IS_ERR(rmap)) { ret = PTR_ERR(rmap); dev_err(dev, "regmap init failed: %d\n", ret); return ret; } i2c_set_clientdata(client, mcp); config.regmap = rmap; config.driver_data = mcp; mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW); if (IS_ERR(mcp->lpm)) { dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm)); return PTR_ERR(mcp->lpm); } ret = setup_regulators(mcp, dev, config); if (ret != 0) return ret; mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE); return 0; } #ifdef CONFIG_PM_SLEEP static int mcp16502_suspend_noirq(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct mcp16502 *mcp = i2c_get_clientdata(client); mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_LPM); return 0; } static int mcp16502_resume_noirq(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct mcp16502 *mcp = i2c_get_clientdata(client); mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE); return 0; } #endif #ifdef CONFIG_PM static const struct dev_pm_ops mcp16502_pm_ops = { SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend_noirq, mcp16502_resume_noirq) }; #endif static const struct i2c_device_id mcp16502_i2c_id[] = { { "mcp16502", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, mcp16502_i2c_id); static struct i2c_driver mcp16502_drv = { .probe = mcp16502_probe, .driver = { .name = "mcp16502-regulator", .of_match_table = of_match_ptr(mcp16502_ids), #ifdef CONFIG_PM .pm = &mcp16502_pm_ops, #endif }, .id_table = mcp16502_i2c_id, }; module_i2c_driver(mcp16502_drv); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("MCP16502 PMIC driver"); MODULE_AUTHOR("Andrei Stefanescu andrei.stefanescu@microchip.com");