/* * Copyright 2012 Freescale Semiconductor, Inc. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ #include <dt-bindings/gpio/gpio.h> #include "imx28-pinfunc.h" / { #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&icoll>; /* * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &mac0; ethernet1 = &mac1; gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; gpio3 = &gpio3; gpio4 = &gpio4; saif0 = &saif0; saif1 = &saif1; serial0 = &auart0; serial1 = &auart1; serial2 = &auart2; serial3 = &auart3; serial4 = &auart4; spi0 = &ssp1; spi1 = &ssp2; usbphy0 = &usbphy0; usbphy1 = &usbphy1; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; reg = <0>; }; }; apb@80000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x80000000 0x80000>; ranges; apbh@80000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x80000000 0x3c900>; ranges; icoll: interrupt-controller@80000000 { compatible = "fsl,imx28-icoll", "fsl,icoll"; interrupt-controller; #interrupt-cells = <1>; reg = <0x80000000 0x2000>; }; hsadc: hsadc@80002000 { reg = <0x80002000 0x2000>; interrupts = <13>; dmas = <&dma_apbh 12>; dma-names = "rx"; status = "disabled"; }; dma_apbh: dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; reg = <0x80004000 0x2000>; interrupts = <82 83 84 85 88 88 88 88 88 88 88 88 87 86 0 0>; interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3", "gpmi0", "gmpi1", "gpmi2", "gmpi3", "gpmi4", "gmpi5", "gpmi6", "gmpi7", "hsadc", "lcdif", "empty", "empty"; #dma-cells = <1>; dma-channels = <16>; clocks = <&clks 25>; }; perfmon: perfmon@80006000 { reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; gpmi: gpmi-nand@8000c000 { compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <41>; interrupt-names = "bch"; clocks = <&clks 50>; clock-names = "gpmi_io"; dmas = <&dma_apbh 4>; dma-names = "rx-tx"; status = "disabled"; }; ssp0: ssp@80010000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80010000 0x2000>; interrupts = <96>; clocks = <&clks 46>; dmas = <&dma_apbh 0>; dma-names = "rx-tx"; status = "disabled"; }; ssp1: ssp@80012000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80012000 0x2000>; interrupts = <97>; clocks = <&clks 47>; dmas = <&dma_apbh 1>; dma-names = "rx-tx"; status = "disabled"; }; ssp2: ssp@80014000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80014000 0x2000>; interrupts = <98>; clocks = <&clks 48>; dmas = <&dma_apbh 2>; dma-names = "rx-tx"; status = "disabled"; }; ssp3: ssp@80016000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80016000 0x2000>; interrupts = <99>; clocks = <&clks 49>; dmas = <&dma_apbh 3>; dma-names = "rx-tx"; status = "disabled"; }; pinctrl: pinctrl@80018000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; reg = <0>; interrupts = <127>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio1: gpio@1 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; reg = <1>; interrupts = <126>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio2: gpio@2 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; reg = <2>; interrupts = <125>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio3: gpio@3 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; reg = <3>; interrupts = <124>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio4: gpio@4 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; reg = <4>; interrupts = <123>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; duart_pins_a: duart@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_PWM0__DUART_RX MX28_PAD_PWM1__DUART_TX >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; duart_pins_b: duart@1 { reg = <1>; fsl,pinmux-ids = < MX28_PAD_AUART0_CTS__DUART_RX MX28_PAD_AUART0_RTS__DUART_TX >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; duart_4pins_a: duart-4pins@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART0_CTS__DUART_RX MX28_PAD_AUART0_RTS__DUART_TX MX28_PAD_AUART0_RX__DUART_CTS MX28_PAD_AUART0_TX__DUART_RTS >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; gpmi_pins_a: gpmi-nand@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_GPMI_D00__GPMI_D0 MX28_PAD_GPMI_D01__GPMI_D1 MX28_PAD_GPMI_D02__GPMI_D2 MX28_PAD_GPMI_D03__GPMI_D3 MX28_PAD_GPMI_D04__GPMI_D4 MX28_PAD_GPMI_D05__GPMI_D5 MX28_PAD_GPMI_D06__GPMI_D6 MX28_PAD_GPMI_D07__GPMI_D7 MX28_PAD_GPMI_CE0N__GPMI_CE0N MX28_PAD_GPMI_RDY0__GPMI_READY0 MX28_PAD_GPMI_RDN__GPMI_RDN MX28_PAD_GPMI_WRN__GPMI_WRN MX28_PAD_GPMI_ALE__GPMI_ALE MX28_PAD_GPMI_CLE__GPMI_CLE MX28_PAD_GPMI_RESETN__GPMI_RESETN >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; gpmi_status_cfg: gpmi-status-cfg { fsl,pinmux-ids = < MX28_PAD_GPMI_RDN__GPMI_RDN MX28_PAD_GPMI_WRN__GPMI_WRN MX28_PAD_GPMI_RESETN__GPMI_RESETN >; fsl,drive-strength = <MXS_DRIVE_12mA>; }; auart0_pins_a: auart0@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART0_RX__AUART0_RX MX28_PAD_AUART0_TX__AUART0_TX MX28_PAD_AUART0_CTS__AUART0_CTS MX28_PAD_AUART0_RTS__AUART0_RTS >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; auart0_2pins_a: auart0-2pins@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART0_RX__AUART0_RX MX28_PAD_AUART0_TX__AUART0_TX >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; auart1_pins_a: auart1@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART1_RX__AUART1_RX MX28_PAD_AUART1_TX__AUART1_TX MX28_PAD_AUART1_CTS__AUART1_CTS MX28_PAD_AUART1_RTS__AUART1_RTS >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; auart1_2pins_a: auart1-2pins@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART1_RX__AUART1_RX MX28_PAD_AUART1_TX__AUART1_TX >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; auart2_2pins_a: auart2-2pins@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP2_SCK__AUART2_RX MX28_PAD_SSP2_MOSI__AUART2_TX >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; auart2_2pins_b: auart2-2pins@1 { reg = <1>; fsl,pinmux-ids = < MX28_PAD_AUART2_RX__AUART2_RX MX28_PAD_AUART2_TX__AUART2_TX >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; auart2_pins_a: auart2-pins@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART2_RX__AUART2_RX MX28_PAD_AUART2_TX__AUART2_TX MX28_PAD_AUART2_CTS__AUART2_CTS MX28_PAD_AUART2_RTS__AUART2_RTS >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; auart3_pins_a: auart3@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART3_RX__AUART3_RX MX28_PAD_AUART3_TX__AUART3_TX MX28_PAD_AUART3_CTS__AUART3_CTS MX28_PAD_AUART3_RTS__AUART3_RTS >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; auart3_2pins_a: auart3-2pins@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP2_MISO__AUART3_RX MX28_PAD_SSP2_SS0__AUART3_TX >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; auart3_2pins_b: auart3-2pins@1 { reg = <1>; fsl,pinmux-ids = < MX28_PAD_AUART3_RX__AUART3_RX MX28_PAD_AUART3_TX__AUART3_TX >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; auart4_2pins_a: auart4@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP3_SCK__AUART4_TX MX28_PAD_SSP3_MOSI__AUART4_RX >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; auart4_2pins_b: auart4@1 { reg = <1>; fsl,pinmux-ids = < MX28_PAD_AUART0_CTS__AUART4_RX MX28_PAD_AUART0_RTS__AUART4_TX >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; mac0_pins_a: mac0@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_ENET0_MDC__ENET0_MDC MX28_PAD_ENET0_MDIO__ENET0_MDIO MX28_PAD_ENET0_RX_EN__ENET0_RX_EN MX28_PAD_ENET0_RXD0__ENET0_RXD0 MX28_PAD_ENET0_RXD1__ENET0_RXD1 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN MX28_PAD_ENET0_TXD0__ENET0_TXD0 MX28_PAD_ENET0_TXD1__ENET0_TXD1 MX28_PAD_ENET_CLK__CLKCTRL_ENET >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; mac0_pins_b: mac0@1 { reg = <1>; fsl,pinmux-ids = < MX28_PAD_ENET0_MDC__ENET0_MDC MX28_PAD_ENET0_MDIO__ENET0_MDIO MX28_PAD_ENET0_RX_EN__ENET0_RX_EN MX28_PAD_ENET0_RXD0__ENET0_RXD0 MX28_PAD_ENET0_RXD1__ENET0_RXD1 MX28_PAD_ENET0_RXD2__ENET0_RXD2 MX28_PAD_ENET0_RXD3__ENET0_RXD3 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN MX28_PAD_ENET0_TXD0__ENET0_TXD0 MX28_PAD_ENET0_TXD1__ENET0_TXD1 MX28_PAD_ENET0_TXD2__ENET0_TXD2 MX28_PAD_ENET0_TXD3__ENET0_TXD3 MX28_PAD_ENET_CLK__CLKCTRL_ENET MX28_PAD_ENET0_COL__ENET0_COL MX28_PAD_ENET0_CRS__ENET0_CRS MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; mac1_pins_a: mac1@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_ENET0_CRS__ENET1_RX_EN MX28_PAD_ENET0_RXD2__ENET1_RXD0 MX28_PAD_ENET0_RXD3__ENET1_RXD1 MX28_PAD_ENET0_COL__ENET1_TX_EN MX28_PAD_ENET0_TXD2__ENET1_TXD0 MX28_PAD_ENET0_TXD3__ENET1_TXD1 >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP0_DATA0__SSP0_D0 MX28_PAD_SSP0_DATA1__SSP0_D1 MX28_PAD_SSP0_DATA2__SSP0_D2 MX28_PAD_SSP0_DATA3__SSP0_D3 MX28_PAD_SSP0_DATA4__SSP0_D4 MX28_PAD_SSP0_DATA5__SSP0_D5 MX28_PAD_SSP0_DATA6__SSP0_D6 MX28_PAD_SSP0_DATA7__SSP0_D7 MX28_PAD_SSP0_CMD__SSP0_CMD MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MX28_PAD_SSP0_SCK__SSP0_SCK >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc0_4bit_pins_a: mmc0-4bit@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP0_DATA0__SSP0_D0 MX28_PAD_SSP0_DATA1__SSP0_D1 MX28_PAD_SSP0_DATA2__SSP0_D2 MX28_PAD_SSP0_DATA3__SSP0_D3 MX28_PAD_SSP0_CMD__SSP0_CMD MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MX28_PAD_SSP0_SCK__SSP0_SCK >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc0_cd_cfg: mmc0-cd-cfg { fsl,pinmux-ids = < MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT >; fsl,pull-up = <MXS_PULL_DISABLE>; }; mmc0_sck_cfg: mmc0-sck-cfg { fsl,pinmux-ids = < MX28_PAD_SSP0_SCK__SSP0_SCK >; fsl,drive-strength = <MXS_DRIVE_12mA>; fsl,pull-up = <MXS_PULL_DISABLE>; }; mmc1_4bit_pins_a: mmc1-4bit@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_GPMI_D00__SSP1_D0 MX28_PAD_GPMI_D01__SSP1_D1 MX28_PAD_GPMI_D02__SSP1_D2 MX28_PAD_GPMI_D03__SSP1_D3 MX28_PAD_GPMI_RDY1__SSP1_CMD MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT MX28_PAD_GPMI_WRN__SSP1_SCK >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc1_cd_cfg: mmc1-cd-cfg { fsl,pinmux-ids = < MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT >; fsl,pull-up = <MXS_PULL_DISABLE>; }; mmc1_sck_cfg: mmc1-sck-cfg { fsl,pinmux-ids = < MX28_PAD_GPMI_WRN__SSP1_SCK >; fsl,drive-strength = <MXS_DRIVE_12mA>; fsl,pull-up = <MXS_PULL_DISABLE>; }; mmc2_4bit_pins_a: mmc2-4bit@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP0_DATA4__SSP2_D0 MX28_PAD_SSP1_SCK__SSP2_D1 MX28_PAD_SSP1_CMD__SSP2_D2 MX28_PAD_SSP0_DATA5__SSP2_D3 MX28_PAD_SSP0_DATA6__SSP2_CMD MX28_PAD_AUART1_RX__SSP2_CARD_DETECT MX28_PAD_SSP0_DATA7__SSP2_SCK >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc2_4bit_pins_b: mmc2-4bit@1 { reg = <1>; fsl,pinmux-ids = < MX28_PAD_SSP2_SCK__SSP2_SCK MX28_PAD_SSP2_MOSI__SSP2_CMD MX28_PAD_SSP2_MISO__SSP2_D0 MX28_PAD_SSP2_SS0__SSP2_D3 MX28_PAD_SSP2_SS1__SSP2_D1 MX28_PAD_SSP2_SS2__SSP2_D2 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc2_cd_cfg: mmc2-cd-cfg { fsl,pinmux-ids = < MX28_PAD_AUART1_RX__SSP2_CARD_DETECT >; fsl,pull-up = <MXS_PULL_DISABLE>; }; mmc2_sck_cfg_a: mmc2-sck-cfg@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP0_DATA7__SSP2_SCK >; fsl,drive-strength = <MXS_DRIVE_12mA>; fsl,pull-up = <MXS_PULL_DISABLE>; }; mmc2_sck_cfg_b: mmc2-sck-cfg@1 { reg = <1>; fsl,pinmux-ids = < MX28_PAD_SSP2_SCK__SSP2_SCK >; fsl,drive-strength = <MXS_DRIVE_12mA>; fsl,pull-up = <MXS_PULL_DISABLE>; }; i2c0_pins_a: i2c0@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_I2C0_SCL__I2C0_SCL MX28_PAD_I2C0_SDA__I2C0_SDA >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; i2c0_pins_b: i2c0@1 { reg = <1>; fsl,pinmux-ids = < MX28_PAD_AUART0_RX__I2C0_SCL MX28_PAD_AUART0_TX__I2C0_SDA >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; i2c1_pins_a: i2c1@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_PWM0__I2C1_SCL MX28_PAD_PWM1__I2C1_SDA >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; i2c1_pins_b: i2c1@1 { reg = <1>; fsl,pinmux-ids = < MX28_PAD_AUART2_CTS__I2C1_SCL MX28_PAD_AUART2_RTS__I2C1_SDA >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; saif0_pins_a: saif0@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_SAIF0_MCLK__SAIF0_MCLK MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 >; fsl,drive-strength = <MXS_DRIVE_12mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; saif0_pins_b: saif0@1 { reg = <1>; fsl,pinmux-ids = < MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 >; fsl,drive-strength = <MXS_DRIVE_12mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; saif1_pins_a: saif1@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 >; fsl,drive-strength = <MXS_DRIVE_12mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; pwm0_pins_a: pwm0@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_PWM0__PWM_0 >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm2_pins_a: pwm2@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_PWM2__PWM_2 >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm3_pins_a: pwm3@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_PWM3__PWM_3 >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm3_pins_b: pwm3@1 { reg = <1>; fsl,pinmux-ids = < MX28_PAD_SAIF0_MCLK__PWM_3 >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm4_pins_a: pwm4@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_PWM4__PWM_4 >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_24bit_pins_a: lcdif-24bit@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_LCD_D00__LCD_D0 MX28_PAD_LCD_D01__LCD_D1 MX28_PAD_LCD_D02__LCD_D2 MX28_PAD_LCD_D03__LCD_D3 MX28_PAD_LCD_D04__LCD_D4 MX28_PAD_LCD_D05__LCD_D5 MX28_PAD_LCD_D06__LCD_D6 MX28_PAD_LCD_D07__LCD_D7 MX28_PAD_LCD_D08__LCD_D8 MX28_PAD_LCD_D09__LCD_D9 MX28_PAD_LCD_D10__LCD_D10 MX28_PAD_LCD_D11__LCD_D11 MX28_PAD_LCD_D12__LCD_D12 MX28_PAD_LCD_D13__LCD_D13 MX28_PAD_LCD_D14__LCD_D14 MX28_PAD_LCD_D15__LCD_D15 MX28_PAD_LCD_D16__LCD_D16 MX28_PAD_LCD_D17__LCD_D17 MX28_PAD_LCD_D18__LCD_D18 MX28_PAD_LCD_D19__LCD_D19 MX28_PAD_LCD_D20__LCD_D20 MX28_PAD_LCD_D21__LCD_D21 MX28_PAD_LCD_D22__LCD_D22 MX28_PAD_LCD_D23__LCD_D23 >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_18bit_pins_a: lcdif-18bit@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_LCD_D00__LCD_D0 MX28_PAD_LCD_D01__LCD_D1 MX28_PAD_LCD_D02__LCD_D2 MX28_PAD_LCD_D03__LCD_D3 MX28_PAD_LCD_D04__LCD_D4 MX28_PAD_LCD_D05__LCD_D5 MX28_PAD_LCD_D06__LCD_D6 MX28_PAD_LCD_D07__LCD_D7 MX28_PAD_LCD_D08__LCD_D8 MX28_PAD_LCD_D09__LCD_D9 MX28_PAD_LCD_D10__LCD_D10 MX28_PAD_LCD_D11__LCD_D11 MX28_PAD_LCD_D12__LCD_D12 MX28_PAD_LCD_D13__LCD_D13 MX28_PAD_LCD_D14__LCD_D14 MX28_PAD_LCD_D15__LCD_D15 MX28_PAD_LCD_D16__LCD_D16 MX28_PAD_LCD_D17__LCD_D17 >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_16bit_pins_a: lcdif-16bit@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_LCD_D00__LCD_D0 MX28_PAD_LCD_D01__LCD_D1 MX28_PAD_LCD_D02__LCD_D2 MX28_PAD_LCD_D03__LCD_D3 MX28_PAD_LCD_D04__LCD_D4 MX28_PAD_LCD_D05__LCD_D5 MX28_PAD_LCD_D06__LCD_D6 MX28_PAD_LCD_D07__LCD_D7 MX28_PAD_LCD_D08__LCD_D8 MX28_PAD_LCD_D09__LCD_D9 MX28_PAD_LCD_D10__LCD_D10 MX28_PAD_LCD_D11__LCD_D11 MX28_PAD_LCD_D12__LCD_D12 MX28_PAD_LCD_D13__LCD_D13 MX28_PAD_LCD_D14__LCD_D14 MX28_PAD_LCD_D15__LCD_D15 >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_sync_pins_a: lcdif-sync@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_RD_E__LCD_VSYNC MX28_PAD_LCD_WR_RWN__LCD_HSYNC >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; can0_pins_a: can0@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_GPMI_RDY2__CAN0_TX MX28_PAD_GPMI_RDY3__CAN0_RX >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; can1_pins_a: can1@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_GPMI_CE2N__CAN1_TX MX28_PAD_GPMI_CE3N__CAN1_RX >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; spi2_pins_a: spi2@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP2_SCK__SSP2_SCK MX28_PAD_SSP2_MOSI__SSP2_CMD MX28_PAD_SSP2_MISO__SSP2_D0 MX28_PAD_SSP2_SS0__SSP2_D3 >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; spi3_pins_a: spi3@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART2_RX__SSP3_D4 MX28_PAD_AUART2_TX__SSP3_D5 MX28_PAD_SSP3_SCK__SSP3_SCK MX28_PAD_SSP3_MOSI__SSP3_CMD MX28_PAD_SSP3_MISO__SSP3_D0 MX28_PAD_SSP3_SS0__SSP3_D3 >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; spi3_pins_b: spi3@1 { reg = <1>; fsl,pinmux-ids = < MX28_PAD_SSP3_SCK__SSP3_SCK MX28_PAD_SSP3_MOSI__SSP3_CMD MX28_PAD_SSP3_MISO__SSP3_D0 MX28_PAD_SSP3_SS0__SSP3_D3 >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; usb0_pins_a: usb0@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP2_SS2__USB0_OVERCURRENT >; fsl,drive-strength = <MXS_DRIVE_12mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; usb0_pins_b: usb0@1 { reg = <1>; fsl,pinmux-ids = < MX28_PAD_AUART1_CTS__USB0_OVERCURRENT >; fsl,drive-strength = <MXS_DRIVE_12mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; usb1_pins_a: usb1@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP2_SS1__USB1_OVERCURRENT >; fsl,drive-strength = <MXS_DRIVE_12mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; usb0_id_pins_a: usb0id@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART1_RTS__USB0_ID >; fsl,drive-strength = <MXS_DRIVE_12mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; usb0_id_pins_b: usb0id1@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_PWM2__USB0_ID >; fsl,drive-strength = <MXS_DRIVE_12mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; }; digctl: digctl@8001c000 { compatible = "fsl,imx28-digctl", "fsl,imx23-digctl"; reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; etm: etm@80022000 { reg = <0x80022000 0x2000>; status = "disabled"; }; dma_apbx: dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; reg = <0x80024000 0x2000>; interrupts = <78 79 66 0 80 81 68 69 70 71 72 73 74 75 76 77>; interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty", "saif0", "saif1", "i2c0", "i2c1", "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; #dma-cells = <1>; dma-channels = <16>; clocks = <&clks 26>; }; dcp: dcp@80028000 { compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; reg = <0x80028000 0x2000>; interrupts = <52 53 54>; status = "okay"; }; pxp: pxp@8002a000 { reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; ocotp: ocotp@8002c000 { compatible = "fsl,imx28-ocotp", "fsl,ocotp"; #address-cells = <1>; #size-cells = <1>; reg = <0x8002c000 0x2000>; clocks = <&clks 25>; }; axi-ahb@8002e000 { reg = <0x8002e000 0x2000>; status = "disabled"; }; lcdif: lcdif@80030000 { compatible = "fsl,imx28-lcdif"; reg = <0x80030000 0x2000>; interrupts = <38>; clocks = <&clks 55>; dmas = <&dma_apbh 13>; dma-names = "rx"; status = "disabled"; }; can0: can@80032000 { compatible = "fsl,imx28-flexcan"; reg = <0x80032000 0x2000>; interrupts = <8>; clocks = <&clks 58>, <&clks 58>; clock-names = "ipg", "per"; status = "disabled"; }; can1: can@80034000 { compatible = "fsl,imx28-flexcan"; reg = <0x80034000 0x2000>; interrupts = <9>; clocks = <&clks 59>, <&clks 59>; clock-names = "ipg", "per"; status = "disabled"; }; simdbg: simdbg@8003c000 { reg = <0x8003c000 0x200>; status = "disabled"; }; simgpmisel: simgpmisel@8003c200 { reg = <0x8003c200 0x100>; status = "disabled"; }; simsspsel: simsspsel@8003c300 { reg = <0x8003c300 0x100>; status = "disabled"; }; simmemsel: simmemsel@8003c400 { reg = <0x8003c400 0x100>; status = "disabled"; }; gpiomon: gpiomon@8003c500 { reg = <0x8003c500 0x100>; status = "disabled"; }; simenet: simenet@8003c700 { reg = <0x8003c700 0x100>; status = "disabled"; }; armjtag: armjtag@8003c800 { reg = <0x8003c800 0x100>; status = "disabled"; }; }; apbx@80040000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x80040000 0x40000>; ranges; clks: clkctrl@80040000 { compatible = "fsl,imx28-clkctrl", "fsl,clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; saif0: saif@80042000 { #sound-dai-cells = <0>; compatible = "fsl,imx28-saif"; reg = <0x80042000 0x2000>; interrupts = <59>; #clock-cells = <0>; clocks = <&clks 53>; dmas = <&dma_apbx 4>; dma-names = "rx-tx"; status = "disabled"; }; power: power@80044000 { reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { #sound-dai-cells = <0>; compatible = "fsl,imx28-saif"; reg = <0x80046000 0x2000>; interrupts = <58>; clocks = <&clks 54>; dmas = <&dma_apbx 5>; dma-names = "rx-tx"; status = "disabled"; }; lradc: lradc@80050000 { compatible = "fsl,imx28-lradc"; reg = <0x80050000 0x2000>; interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; status = "disabled"; clocks = <&clks 41>; #io-channel-cells = <1>; }; spdif: spdif@80054000 { reg = <0x80054000 0x2000>; interrupts = <45>; dmas = <&dma_apbx 2>; dma-names = "tx"; status = "disabled"; }; mxs_rtc: rtc@80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; reg = <0x80056000 0x2000>; interrupts = <29>; }; i2c0: i2c@80058000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; reg = <0x80058000 0x2000>; interrupts = <111>; clock-frequency = <100000>; dmas = <&dma_apbx 6>; dma-names = "rx-tx"; status = "disabled"; }; i2c1: i2c@8005a000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; reg = <0x8005a000 0x2000>; interrupts = <110>; clock-frequency = <100000>; dmas = <&dma_apbx 7>; dma-names = "rx-tx"; status = "disabled"; }; pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; reg = <0x80064000 0x2000>; clocks = <&clks 44>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; }; timer: timrot@80068000 { compatible = "fsl,imx28-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; interrupts = <48 49 50 51>; clocks = <&clks 26>; }; auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112>; dmas = <&dma_apbx 8>, <&dma_apbx 9>; dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; auart1: serial@8006c000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <113>; dmas = <&dma_apbx 10>, <&dma_apbx 11>; dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; auart2: serial@8006e000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <114>; dmas = <&dma_apbx 12>, <&dma_apbx 13>; dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; auart3: serial@80070000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; interrupts = <115>; dmas = <&dma_apbx 14>, <&dma_apbx 15>; dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; auart4: serial@80072000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; interrupts = <116>; dmas = <&dma_apbx 0>, <&dma_apbx 1>; dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; duart: serial@80074000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80074000 0x1000>; interrupts = <47>; clocks = <&clks 45>, <&clks 26>; clock-names = "uart", "apb_pclk"; status = "disabled"; }; usbphy0: usbphy@8007c000 { compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007c000 0x2000>; clocks = <&clks 62>; status = "disabled"; }; usbphy1: usbphy@8007e000 { compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007e000 0x2000>; clocks = <&clks 63>; status = "disabled"; }; }; }; ahb@80080000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x80080000 0x80000>; ranges; usb0: usb@80080000 { compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80080000 0x10000>; interrupts = <93>; clocks = <&clks 60>; fsl,usbphy = <&usbphy0>; status = "disabled"; }; usb1: usb@80090000 { compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80090000 0x10000>; interrupts = <92>; clocks = <&clks 61>; fsl,usbphy = <&usbphy1>; dr_mode = "host"; status = "disabled"; }; dflpt: dflpt@800c0000 { reg = <0x800c0000 0x10000>; status = "disabled"; }; mac0: ethernet@800f0000 { compatible = "fsl,imx28-fec"; reg = <0x800f0000 0x4000>; interrupts = <101>; clocks = <&clks 57>, <&clks 57>, <&clks 64>; clock-names = "ipg", "ahb", "enet_out"; status = "disabled"; }; mac1: ethernet@800f4000 { compatible = "fsl,imx28-fec"; reg = <0x800f4000 0x4000>; interrupts = <102>; clocks = <&clks 57>, <&clks 57>; clock-names = "ipg", "ahb"; status = "disabled"; }; etn_switch: switch@800f8000 { reg = <0x800f8000 0x8000>; status = "disabled"; }; }; iio-hwmon { compatible = "iio-hwmon"; io-channels = <&lradc 8>; }; };