/* * Driver for Ntrig/Microsoft Touchscreens over SPI * * Copyright (c) 2016 Red Hat Inc. */ /* * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation; version 2 of the License. */ #include #include #include #include #include #include #include #include #include #include #include #define SURFACE3_PACKET_SIZE 264 #define SURFACE3_REPORT_TOUCH 0xd2 struct surface3_ts_data { struct spi_device *spi; struct gpio_desc *gpiod_rst[2]; struct input_dev *input_dev; u8 rd_buf[SURFACE3_PACKET_SIZE] ____cacheline_aligned; }; struct surface3_ts_data_finger { u8 status; __le16 tracking_id; __le16 x; __le16 cx; __le16 y; __le16 cy; __le16 width; __le16 height; u32 padding; } __packed; static int surface3_spi_read(struct surface3_ts_data *ts_data) { struct spi_device *spi = ts_data->spi; memset(ts_data->rd_buf, 0, sizeof(ts_data->rd_buf)); return spi_read(spi, ts_data->rd_buf, sizeof(ts_data->rd_buf)); } static void surface3_spi_report_touch(struct surface3_ts_data *ts_data, struct surface3_ts_data_finger *finger) { int st = finger->status & 0x01; int slot; slot = input_mt_get_slot_by_key(ts_data->input_dev, get_unaligned_le16(&finger->tracking_id)); if (slot < 0) return; input_mt_slot(ts_data->input_dev, slot); input_mt_report_slot_state(ts_data->input_dev, MT_TOOL_FINGER, st); if (st) { input_report_abs(ts_data->input_dev, ABS_MT_POSITION_X, get_unaligned_le16(&finger->x)); input_report_abs(ts_data->input_dev, ABS_MT_POSITION_Y, get_unaligned_le16(&finger->y)); input_report_abs(ts_data->input_dev, ABS_MT_WIDTH_MAJOR, get_unaligned_le16(&finger->width)); input_report_abs(ts_data->input_dev, ABS_MT_WIDTH_MINOR, get_unaligned_le16(&finger->height)); } } static void surface3_spi_process_touch(struct surface3_ts_data *ts_data, u8 *data) { u16 timestamp; unsigned int i; timestamp = get_unaligned_le16(&data[15]); for (i = 0; i < 13; i++) { struct surface3_ts_data_finger *finger; finger = (struct surface3_ts_data_finger *)&data[17 + i * sizeof(struct surface3_ts_data_finger)]; /* * When bit 5 of status is 1, it marks the end of the report: * - touch present: 0xe7 * - touch released: 0xe4 * - nothing valuable: 0xff */ if (finger->status & 0x10) break; surface3_spi_report_touch(ts_data, finger); } input_mt_sync_frame(ts_data->input_dev); input_sync(ts_data->input_dev); } static void surface3_spi_process(struct surface3_ts_data *ts_data) { const char header[] = { 0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01 }; u8 *data = ts_data->rd_buf; if (memcmp(header, data, sizeof(header))) dev_err(&ts_data->spi->dev, "%s header error: %*ph, ignoring...\n", __func__, (int)sizeof(header), data); if (data[9] == SURFACE3_REPORT_TOUCH) surface3_spi_process_touch(ts_data, data); else dev_err(&ts_data->spi->dev, "%s unknown packet type: %x, ignoring...\n", __func__, data[9]); } static irqreturn_t surface3_spi_irq_handler(int irq, void *dev_id) { struct surface3_ts_data *data = dev_id; if (surface3_spi_read(data)) return IRQ_HANDLED; dev_dbg(&data->spi->dev, "%s received -> %*ph\n", __func__, SURFACE3_PACKET_SIZE, data->rd_buf); surface3_spi_process(data); return IRQ_HANDLED; } static void surface3_spi_power(struct surface3_ts_data *data, bool on) { gpiod_set_value(data->gpiod_rst[0], on); gpiod_set_value(data->gpiod_rst[1], on); /* let the device settle a little */ msleep(20); } /** * surface3_spi_get_gpio_config - Get GPIO config from ACPI/DT * * @ts: surface3_spi_ts_data pointer */ static int surface3_spi_get_gpio_config(struct surface3_ts_data *data) { int error; struct device *dev; struct gpio_desc *gpiod; int i; dev = &data->spi->dev; /* Get the reset lines GPIO pin number */ for (i = 0; i < 2; i++) { gpiod = devm_gpiod_get_index(dev, NULL, i, GPIOD_OUT_LOW); if (IS_ERR(gpiod)) { error = PTR_ERR(gpiod); if (error != -EPROBE_DEFER) dev_err(dev, "Failed to get power GPIO %d: %d\n", i, error); return error; } data->gpiod_rst[i] = gpiod; } return 0; } static int surface3_spi_create_touch_input(struct surface3_ts_data *data) { struct input_dev *input; int error; input = devm_input_allocate_device(&data->spi->dev); if (!input) return -ENOMEM; data->input_dev = input; input_set_abs_params(input, ABS_MT_POSITION_X, 0, 9600, 0, 0); input_abs_set_res(input, ABS_MT_POSITION_X, 40); input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 7200, 0, 0); input_abs_set_res(input, ABS_MT_POSITION_Y, 48); input_set_abs_params(input, ABS_MT_WIDTH_MAJOR, 0, 1024, 0, 0); input_set_abs_params(input, ABS_MT_WIDTH_MINOR, 0, 1024, 0, 0); input_mt_init_slots(input, 10, INPUT_MT_DIRECT); input->name = "Surface3 SPI Capacitive TouchScreen"; input->phys = "input/ts"; input->id.bustype = BUS_SPI; input->id.vendor = 0x045e; /* Microsoft */ input->id.product = 0x0001; input->id.version = 0x0000; error = input_register_device(input); if (error) { dev_err(&data->spi->dev, "Failed to register input device: %d", error); return error; } return 0; } static int surface3_spi_probe(struct spi_device *spi) { struct surface3_ts_data *data; int error; /* Set up SPI*/ spi->bits_per_word = 8; spi->mode = SPI_MODE_0; error = spi_setup(spi); if (error) return error; data = devm_kzalloc(&spi->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; data->spi = spi; spi_set_drvdata(spi, data); error = surface3_spi_get_gpio_config(data); if (error) return error; surface3_spi_power(data, true); surface3_spi_power(data, false); surface3_spi_power(data, true); error = surface3_spi_create_touch_input(data); if (error) return error; error = devm_request_threaded_irq(&spi->dev, spi->irq, NULL, surface3_spi_irq_handler, IRQF_ONESHOT, "Surface3-irq", data); if (error) return error; return 0; } static int __maybe_unused surface3_spi_suspend(struct device *dev) { struct spi_device *spi = to_spi_device(dev); struct surface3_ts_data *data = spi_get_drvdata(spi); disable_irq(data->spi->irq); surface3_spi_power(data, false); return 0; } static int __maybe_unused surface3_spi_resume(struct device *dev) { struct spi_device *spi = to_spi_device(dev); struct surface3_ts_data *data = spi_get_drvdata(spi); surface3_spi_power(data, true); enable_irq(data->spi->irq); return 0; } static SIMPLE_DEV_PM_OPS(surface3_spi_pm_ops, surface3_spi_suspend, surface3_spi_resume); #ifdef CONFIG_ACPI static const struct acpi_device_id surface3_spi_acpi_match[] = { { "MSHW0037", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, surface3_spi_acpi_match); #endif static struct spi_driver surface3_spi_driver = { .driver = { .name = "Surface3-spi", .acpi_match_table = ACPI_PTR(surface3_spi_acpi_match), .pm = &surface3_spi_pm_ops, }, .probe = surface3_spi_probe, }; module_spi_driver(surface3_spi_driver); MODULE_AUTHOR("Benjamin Tissoires "); MODULE_DESCRIPTION("Surface 3 SPI touchscreen driver"); MODULE_LICENSE("GPL v2");