/* * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ /dts-v1/; #include "dra72x.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "dra7-mmc-iodelay.dtsi" #include "dra72x-mmc-iodelay.dtsi" #include "am57xx-idk-common.dtsi" / { model = "TI AM5718 IDK"; compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"; memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x40000000>; }; leds { compatible = "gpio-leds"; cpu0-led { label = "status0:red:cpu0"; gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "cpu0"; }; usr0-led { label = "status0:green:usr"; gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; default-state = "off"; }; heartbeat-led { label = "status0:blue:heartbeat"; gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "heartbeat"; }; usr1-led { label = "status1:red:usr"; gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; default-state = "off"; }; usr2-led { label = "status1:green:usr"; gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; default-state = "off"; }; mmc0-led { label = "status1:blue:mmc0"; gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "mmc0"; }; }; }; &extcon_usb2 { id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; }; &mailbox5 { status = "okay"; mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { status = "okay"; }; mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { status = "okay"; }; }; &mailbox6 { status = "okay"; mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { status = "okay"; }; }; &pcie1_rc { status = "okay"; gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; }; &pcie1_ep { gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; }; &mmc1 { pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; pinctrl-1 = <&mmc1_pins_hs>; pinctrl-2 = <&mmc1_pins_sdr12>; pinctrl-3 = <&mmc1_pins_sdr25>; pinctrl-4 = <&mmc1_pins_sdr50>; pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; }; &mmc2 { pinctrl-names = "default", "hs", "ddr_3_3v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; }; &cpu0 { vdd-supply = <&smps12_reg>; };