/* * dz.c: Serial port driver for DECstations equipped * with the DZ chipset. * * Copyright (C) 1998 Olivier A. D. Lebaillif * * Email: olivier.lebaillif@ifrsys.com * * Copyright (C) 2004, 2006 Maciej W. Rozycki * * [31-AUG-98] triemer * Changed IRQ to use Harald's dec internals interrupts.h * removed base_addr code - moving address assignment to setup.c * Changed name of dz_init to rs_init to be consistent with tc code * [13-NOV-98] triemer fixed code to receive characters * after patches by harald to irq code. * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout * field from "current" - somewhere between 2.1.121 and 2.1.131 Qua Jun 27 15:02:26 BRT 2001 * [27-JUN-2001] Arnaldo Carvalho de Melo - cleanups * * Parts (C) 1999 David Airlie, airlied@linux.ie * [07-SEP-99] Bugfixes * * [06-Jan-2002] Russell King * Converted to new serial core */ #undef DEBUG_DZ #if defined(CONFIG_SERIAL_DZ_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "dz.h" static char *dz_name = "DECstation DZ serial driver version "; static char *dz_version = "1.03"; struct dz_port { struct uart_port port; unsigned int cflag; }; static struct dz_port dz_ports[DZ_NB_PORT]; /* * ------------------------------------------------------------ * dz_in () and dz_out () * * These routines are used to access the registers of the DZ * chip, hiding relocation differences between implementation. * ------------------------------------------------------------ */ static inline unsigned short dz_in(struct dz_port *dport, unsigned offset) { volatile unsigned short *addr = (volatile unsigned short *) (dport->port.membase + offset); return *addr; } static inline void dz_out(struct dz_port *dport, unsigned offset, unsigned short value) { volatile unsigned short *addr = (volatile unsigned short *) (dport->port.membase + offset); *addr = value; } /* * ------------------------------------------------------------ * rs_stop () and rs_start () * * These routines are called before setting or resetting * tty->stopped. They enable or disable transmitter interrupts, * as necessary. * ------------------------------------------------------------ */ static void dz_stop_tx(struct uart_port *uport) { struct dz_port *dport = (struct dz_port *)uport; unsigned short tmp, mask = 1 << dport->port.line; unsigned long flags; spin_lock_irqsave(&dport->port.lock, flags); tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ tmp &= ~mask; /* clear the TX flag */ dz_out(dport, DZ_TCR, tmp); spin_unlock_irqrestore(&dport->port.lock, flags); } static void dz_start_tx(struct uart_port *uport) { struct dz_port *dport = (struct dz_port *)uport; unsigned short tmp, mask = 1 << dport->port.line; unsigned long flags; spin_lock_irqsave(&dport->port.lock, flags); tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ tmp |= mask; /* set the TX flag */ dz_out(dport, DZ_TCR, tmp); spin_unlock_irqrestore(&dport->port.lock, flags); } static void dz_stop_rx(struct uart_port *uport) { struct dz_port *dport = (struct dz_port *)uport; unsigned long flags; spin_lock_irqsave(&dport->port.lock, flags); dport->cflag &= ~DZ_CREAD; dz_out(dport, DZ_LPR, dport->cflag | dport->port.line); spin_unlock_irqrestore(&dport->port.lock, flags); } static void dz_enable_ms(struct uart_port *port) { /* nothing to do */ } /* * ------------------------------------------------------------ * * Here start the interrupt handling routines. All of the following * subroutines are declared as inline and are folded into * dz_interrupt. They were separated out for readability's sake. * * Note: dz_interrupt() is a "fast" interrupt, which means that it * runs with interrupts turned off. People who may want to modify * dz_interrupt() should try to keep the interrupt handler as fast as * possible. After you are done making modifications, it is not a bad * idea to do: * * make drivers/serial/dz.s * * and look at the resulting assemble code in dz.s. * * ------------------------------------------------------------ */ /* * ------------------------------------------------------------ * receive_char () * * This routine deals with inputs from any lines. * ------------------------------------------------------------ */ static inline void dz_receive_chars(struct dz_port *dport_in) { struct dz_port *dport; struct tty_struct *tty = NULL; struct uart_icount *icount; int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 }; unsigned short status; unsigned char ch, flag; int i; while ((status = dz_in(dport_in, DZ_RBUF)) & DZ_DVAL) { dport = &dz_ports[LINE(status)]; tty = dport->port.info->tty; /* point to the proper dev */ ch = UCHAR(status); /* grab the char */ icount = &dport->port.icount; icount->rx++; flag = TTY_NORMAL; if (status & DZ_FERR) { /* frame error */ /* * There is no separate BREAK status bit, so * treat framing errors as BREAKs for Magic SysRq * and SAK; normally, otherwise. */ if (uart_handle_break(&dport->port)) continue; if (dport->port.flags & UPF_SAK) flag = TTY_BREAK; else flag = TTY_FRAME; } else if (status & DZ_OERR) /* overrun error */ flag = TTY_OVERRUN; else if (status & DZ_PERR) /* parity error */ flag = TTY_PARITY; /* keep track of the statistics */ switch (flag) { case TTY_FRAME: icount->frame++; break; case TTY_PARITY: icount->parity++; break; case TTY_OVERRUN: icount->overrun++; break; case TTY_BREAK: icount->brk++; break; default: break; } if (uart_handle_sysrq_char(&dport->port, ch)) continue; if ((status & dport->port.ignore_status_mask) == 0) { uart_insert_char(&dport->port, status, DZ_OERR, ch, flag); lines_rx[LINE(status)] = 1; } } for (i = 0; i < DZ_NB_PORT; i++) if (lines_rx[i]) tty_flip_buffer_push(dz_ports[i].port.info->tty); } /* * ------------------------------------------------------------ * transmit_char () * * This routine deals with outputs to any lines. * ------------------------------------------------------------ */ static inline void dz_transmit_chars(struct dz_port *dport_in) { struct dz_port *dport; struct circ_buf *xmit; unsigned short status; unsigned char tmp; status = dz_in(dport_in, DZ_CSR); dport = &dz_ports[LINE(status)]; xmit = &dport->port.info->xmit; if (dport->port.x_char) { /* XON/XOFF chars */ dz_out(dport, DZ_TDR, dport->port.x_char); dport->port.icount.tx++; dport->port.x_char = 0; return; } /* If nothing to do or stopped or hardware stopped. */ if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) { dz_stop_tx(&dport->port); return; } /* * If something to do... (remember the dz has no output fifo, * so we go one char at a time) :-< */ tmp = xmit->buf[xmit->tail]; xmit->tail = (xmit->tail + 1) & (DZ_XMIT_SIZE - 1); dz_out(dport, DZ_TDR, tmp); dport->port.icount.tx++; if (uart_circ_chars_pending(xmit) < DZ_WAKEUP_CHARS) uart_write_wakeup(&dport->port); /* Are we are done. */ if (uart_circ_empty(xmit)) dz_stop_tx(&dport->port); } /* * ------------------------------------------------------------ * check_modem_status() * * DS 3100 & 5100: Only valid for the MODEM line, duh! * DS 5000/200: Valid for the MODEM and PRINTER line. * ------------------------------------------------------------ */ static inline void check_modem_status(struct dz_port *dport) { /* * FIXME: * 1. No status change interrupt; use a timer. * 2. Handle the 3100/5000 as appropriate. --macro */ unsigned short status; /* If not the modem line just return. */ if (dport->port.line != DZ_MODEM) return; status = dz_in(dport, DZ_MSR); /* it's easy, since DSR2 is the only bit in the register */ if (status) dport->port.icount.dsr++; } /* * ------------------------------------------------------------ * dz_interrupt () * * this is the main interrupt routine for the DZ chip. * It deals with the multiple ports. * ------------------------------------------------------------ */ static irqreturn_t dz_interrupt(int irq, void *dev) { struct dz_port *dport = dev; unsigned short status; /* get the reason why we just got an irq */ status = dz_in(dport, DZ_CSR); if ((status & (DZ_RDONE | DZ_RIE)) == (DZ_RDONE | DZ_RIE)) dz_receive_chars(dport); if ((status & (DZ_TRDY | DZ_TIE)) == (DZ_TRDY | DZ_TIE)) dz_transmit_chars(dport); return IRQ_HANDLED; } /* * ------------------------------------------------------------------- * Here ends the DZ interrupt routines. * ------------------------------------------------------------------- */ static unsigned int dz_get_mctrl(struct uart_port *uport) { /* * FIXME: Handle the 3100/5000 as appropriate. --macro */ struct dz_port *dport = (struct dz_port *)uport; unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; if (dport->port.line == DZ_MODEM) { if (dz_in(dport, DZ_MSR) & DZ_MODEM_DSR) mctrl &= ~TIOCM_DSR; } return mctrl; } static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl) { /* * FIXME: Handle the 3100/5000 as appropriate. --macro */ struct dz_port *dport = (struct dz_port *)uport; unsigned short tmp; if (dport->port.line == DZ_MODEM) { tmp = dz_in(dport, DZ_TCR); if (mctrl & TIOCM_DTR) tmp &= ~DZ_MODEM_DTR; else tmp |= DZ_MODEM_DTR; dz_out(dport, DZ_TCR, tmp); } } /* * ------------------------------------------------------------------- * startup () * * various initialization tasks * ------------------------------------------------------------------- */ static int dz_startup(struct uart_port *uport) { struct dz_port *dport = (struct dz_port *)uport; unsigned long flags; unsigned short tmp; spin_lock_irqsave(&dport->port.lock, flags); /* enable the interrupt and the scanning */ tmp = dz_in(dport, DZ_CSR); tmp |= DZ_RIE | DZ_TIE | DZ_MSE; dz_out(dport, DZ_CSR, tmp); spin_unlock_irqrestore(&dport->port.lock, flags); return 0; } /* * ------------------------------------------------------------------- * shutdown () * * This routine will shutdown a serial port; interrupts are disabled, and * DTR is dropped if the hangup on close termio flag is on. * ------------------------------------------------------------------- */ static void dz_shutdown(struct uart_port *uport) { dz_stop_tx(uport); } /* * ------------------------------------------------------------------- * dz_tx_empty() -- get the transmitter empty status * * Purpose: Let user call ioctl() to get info when the UART physically * is emptied. On bus types like RS485, the transmitter must * release the bus after transmitting. This must be done when * the transmit shift register is empty, not be done when the * transmit holding register is empty. This functionality * allows an RS485 driver to be written in user space. * ------------------------------------------------------------------- */ static unsigned int dz_tx_empty(struct uart_port *uport) { struct dz_port *dport = (struct dz_port *)uport; unsigned short tmp, mask = 1 << dport->port.line; tmp = dz_in(dport, DZ_TCR); tmp &= mask; return tmp ? 0 : TIOCSER_TEMT; } static void dz_break_ctl(struct uart_port *uport, int break_state) { /* * FIXME: Can't access BREAK bits in TDR easily; * reuse the code for polled TX. --macro */ struct dz_port *dport = (struct dz_port *)uport; unsigned long flags; unsigned short tmp, mask = 1 << dport->port.line; spin_lock_irqsave(&uport->lock, flags); tmp = dz_in(dport, DZ_TCR); if (break_state) tmp |= mask; else tmp &= ~mask; dz_out(dport, DZ_TCR, tmp); spin_unlock_irqrestore(&uport->lock, flags); } static void dz_set_termios(struct uart_port *uport, struct ktermios *termios, struct ktermios *old_termios) { struct dz_port *dport = (struct dz_port *)uport; unsigned long flags; unsigned int cflag, baud; cflag = dport->port.line; switch (termios->c_cflag & CSIZE) { case CS5: cflag |= DZ_CS5; break; case CS6: cflag |= DZ_CS6; break; case CS7: cflag |= DZ_CS7; break; case CS8: default: cflag |= DZ_CS8; } if (termios->c_cflag & CSTOPB) cflag |= DZ_CSTOPB; if (termios->c_cflag & PARENB) cflag |= DZ_PARENB; if (termios->c_cflag & PARODD) cflag |= DZ_PARODD; baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600); switch (baud) { case 50: cflag |= DZ_B50; break; case 75: cflag |= DZ_B75; break; case 110: cflag |= DZ_B110; break; case 134: cflag |= DZ_B134; break; case 150: cflag |= DZ_B150; break; case 300: cflag |= DZ_B300; break; case 600: cflag |= DZ_B600; break; case 1200: cflag |= DZ_B1200; break; case 1800: cflag |= DZ_B1800; break; case 2000: cflag |= DZ_B2000; break; case 2400: cflag |= DZ_B2400; break; case 3600: cflag |= DZ_B3600; break; case 4800: cflag |= DZ_B4800; break; case 7200: cflag |= DZ_B7200; break; case 9600: default: cflag |= DZ_B9600; } if (termios->c_cflag & CREAD) cflag |= DZ_RXENAB; spin_lock_irqsave(&dport->port.lock, flags); dz_out(dport, DZ_LPR, cflag | dport->port.line); dport->cflag = cflag; /* setup accept flag */ dport->port.read_status_mask = DZ_OERR; if (termios->c_iflag & INPCK) dport->port.read_status_mask |= DZ_FERR | DZ_PERR; /* characters to ignore */ uport->ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR; spin_unlock_irqrestore(&dport->port.lock, flags); } static const char *dz_type(struct uart_port *port) { return "DZ"; } static void dz_release_port(struct uart_port *port) { /* nothing to do */ } static int dz_request_port(struct uart_port *port) { return 0; } static void dz_config_port(struct uart_port *port, int flags) { if (flags & UART_CONFIG_TYPE) port->type = PORT_DZ; } /* * verify the new serial_struct (for TIOCSSERIAL). */ static int dz_verify_port(struct uart_port *port, struct serial_struct *ser) { int ret = 0; if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ) ret = -EINVAL; if (ser->irq != port->irq) ret = -EINVAL; return ret; } static struct uart_ops dz_ops = { .tx_empty = dz_tx_empty, .get_mctrl = dz_get_mctrl, .set_mctrl = dz_set_mctrl, .stop_tx = dz_stop_tx, .start_tx = dz_start_tx, .stop_rx = dz_stop_rx, .enable_ms = dz_enable_ms, .break_ctl = dz_break_ctl, .startup = dz_startup, .shutdown = dz_shutdown, .set_termios = dz_set_termios, .type = dz_type, .release_port = dz_release_port, .request_port = dz_request_port, .config_port = dz_config_port, .verify_port = dz_verify_port, }; static void __init dz_init_ports(void) { static int first = 1; struct dz_port *dport; unsigned long base; int i; if (!first) return; first = 0; if (mips_machtype == MACH_DS23100 || mips_machtype == MACH_DS5100) base = CKSEG1ADDR(KN01_SLOT_BASE + KN01_DZ11); else base = CKSEG1ADDR(KN02_SLOT_BASE + KN02_DZ11); for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) { spin_lock_init(&dport->port.lock); dport->port.membase = (char *) base; dport->port.iotype = UPIO_MEM; dport->port.irq = dec_interrupt[DEC_IRQ_DZ11]; dport->port.line = i; dport->port.fifosize = 1; dport->port.ops = &dz_ops; dport->port.flags = UPF_BOOT_AUTOCONF; } } static void dz_reset(struct dz_port *dport) { dz_out(dport, DZ_CSR, DZ_CLR); while (dz_in(dport, DZ_CSR) & DZ_CLR); iob(); /* enable scanning */ dz_out(dport, DZ_CSR, DZ_MSE); } #ifdef CONFIG_SERIAL_DZ_CONSOLE /* * ------------------------------------------------------------------- * dz_console_putchar() -- transmit a character * * Polled transmission. This is tricky. We need to mask transmit * interrupts so that they do not interfere, enable the transmitter * for the line requested and then wait till the transmit scanner * requests data for this line. But it may request data for another * line first, in which case we have to disable its transmitter and * repeat waiting till our line pops up. Only then the character may * be transmitted. Finally, the state of the transmitter mask is * restored. Welcome to the world of PDP-11! * ------------------------------------------------------------------- */ static void dz_console_putchar(struct uart_port *uport, int ch) { struct dz_port *dport = (struct dz_port *)uport; unsigned long flags; unsigned short csr, tcr, trdy, mask; int loops = 10000; spin_lock_irqsave(&dport->port.lock, flags); csr = dz_in(dport, DZ_CSR); dz_out(dport, DZ_CSR, csr & ~DZ_TIE); tcr = dz_in(dport, DZ_TCR); tcr |= 1 << dport->port.line; mask = tcr; dz_out(dport, DZ_TCR, mask); iob(); spin_unlock_irqrestore(&dport->port.lock, flags); do { trdy = dz_in(dport, DZ_CSR); if (!(trdy & DZ_TRDY)) continue; trdy = (trdy & DZ_TLINE) >> 8; if (trdy == dport->port.line) break; mask &= ~(1 << trdy); dz_out(dport, DZ_TCR, mask); iob(); udelay(2); } while (loops--); if (loops) /* Cannot send otherwise. */ dz_out(dport, DZ_TDR, ch); dz_out(dport, DZ_TCR, tcr); dz_out(dport, DZ_CSR, csr); } /* * ------------------------------------------------------------------- * dz_console_print () * * dz_console_print is registered for printk. * The console must be locked when we get here. * ------------------------------------------------------------------- */ static void dz_console_print(struct console *co, const char *str, unsigned int count) { struct dz_port *dport = &dz_ports[co->index]; #ifdef DEBUG_DZ prom_printf((char *) str); #endif uart_console_write(&dport->port, str, count, dz_console_putchar); } static int __init dz_console_setup(struct console *co, char *options) { struct dz_port *dport = &dz_ports[co->index]; int baud = 9600; int bits = 8; int parity = 'n'; int flow = 'n'; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); dz_reset(dport); return uart_set_options(&dport->port, co, baud, parity, bits, flow); } static struct uart_driver dz_reg; static struct console dz_sercons = { .name = "ttyS", .write = dz_console_print, .device = uart_console_device, .setup = dz_console_setup, .flags = CON_PRINTBUFFER, .index = -1, .data = &dz_reg, }; static int __init dz_serial_console_init(void) { if (!IOASIC) { dz_init_ports(); register_console(&dz_sercons); return 0; } else return -ENXIO; } console_initcall(dz_serial_console_init); #define SERIAL_DZ_CONSOLE &dz_sercons #else #define SERIAL_DZ_CONSOLE NULL #endif /* CONFIG_SERIAL_DZ_CONSOLE */ static struct uart_driver dz_reg = { .owner = THIS_MODULE, .driver_name = "serial", .dev_name = "ttyS", .major = TTY_MAJOR, .minor = 64, .nr = DZ_NB_PORT, .cons = SERIAL_DZ_CONSOLE, }; static int __init dz_init(void) { int ret, i; if (IOASIC) return -ENXIO; printk("%s%s\n", dz_name, dz_version); dz_init_ports(); #ifndef CONFIG_SERIAL_DZ_CONSOLE /* reset the chip */ dz_reset(&dz_ports[0]); #endif ret = uart_register_driver(&dz_reg); if (ret != 0) goto out; ret = request_irq(dz_ports[0].port.irq, dz_interrupt, IRQF_DISABLED, "DZ", &dz_ports[0]); if (ret != 0) { printk(KERN_ERR "dz: Cannot get IRQ %d!\n", dz_ports[0].port.irq); goto out_unregister; } for (i = 0; i < DZ_NB_PORT; i++) uart_add_one_port(&dz_reg, &dz_ports[i].port); return ret; out_unregister: uart_unregister_driver(&dz_reg); out: return ret; } module_init(dz_init); MODULE_DESCRIPTION("DECstation DZ serial driver"); MODULE_LICENSE("GPL");