There's only one instance where we pass different gfp mask to
unlock_extent_cached. Add a separate helper for that and then we can
drop the gfp parameter from unlock_extent_cached.
Signed-off-by: David Sterba <dsterba@suse.com>
The tree argument passed to extent_write_full_page is referenced from
the page being passed to the same function. Since we already have
enough information to get the reference, remove the function parameter.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is called only from submit_compressed_extents and the
io tree being passed is always that of the inode. But we are also
passing the inode, so just move getting the io tree pointer in
extent_write_locked_range to simplify the signature.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass btrfs_get_extent_fiemap and we don't expect anything
else in the context of extent_fiemap.
Signed-off-by: David Sterba <dsterba@suse.com>
All callers use GFP_NOFS, we don't have to pass it as an argument. The
built-in tests pass GFP_KERNEL, but they run only at module load time
and NOFS works there as well.
Signed-off-by: David Sterba <dsterba@suse.com>
Use __clear_extent_bit directly in case we want to pass unknown
gfp flags. Otherwise all clear_extent_bit callers use GFP_NOFS, so we
can sink them to the function and reduce argument count, at the cost
that __clear_extent_bit has to be exported.
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS uses bio->bi_vcnt to figure out page numbers, this approach is no
longer valid once we start enabling multipage bvecs.
correct once we start to enable multipage bvec.
Use bio_nr_pages() to do that instead.
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: linux-btrfs@vger.kernel.org
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=7UW+
-----END PGP SIGNATURE-----
Merge tag 'for-4.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We've collected some fixes in since the pre-merge window freeze.
There's technically only one regression fix for 4.15, but the rest
seems important and candidates for stable.
- fix missing flush bio puts in error cases (is serious, but rarely
happens)
- fix reporting stat::st_blocks for buffered append writes
- fix space cache invalidation
- fix out of bound memory access when setting zlib level
- fix potential memory corruption when fsync fails in the middle
- fix crash in integrity checker
- incremetnal send fix, path mixup for certain unlink/rename
combination
- pass flags to writeback so compressed writes can be throttled
properly
- error handling fixes"
* tag 'for-4.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: incremental send, fix wrong unlink path after renaming file
btrfs: tree-checker: Fix false panic for sanity test
Btrfs: fix list_add corruption and soft lockups in fsync
btrfs: Fix wild memory access in compression level parser
btrfs: fix deadlock when writing out space cache
btrfs: clear space cache inode generation always
Btrfs: fix reported number of inode blocks after buffered append writes
Btrfs: move definition of the function btrfs_find_new_delalloc_bytes
Btrfs: bail out gracefully rather than BUG_ON
btrfs: dev_alloc_list is not protected by RCU, use normal list_del
btrfs: add missing device::flush_bio puts
btrfs: Fix transaction abort during failure in btrfs_rm_dev_item
Btrfs: add write_flags for compression bio
The patch from commit a7e3b975a0 ("Btrfs: fix reported number of inode
blocks") introduced a regression where if we do a buffered write starting
at position equal to or greater than the file's size and then stat(2) the
file before writeback is triggered, the number of used blocks does not
change (unless there's a prealloc/unwritten extent). Example:
$ xfs_io -f -c "pwrite -S 0xab 0 64K" foobar
$ du -h foobar
0 foobar
$ sync
$ du -h foobar
64K foobar
The first version of that patch didn't had this regression and the second
version, which was the one committed, was made only to address some
performance regression detected by the intel test robots using fs_mark.
This fixes the regression by setting the new delaloc bit in the range, and
doing it at btrfs_dirty_pages() while setting the regular dealloc bit as
well, so that this way we set both bits at once avoiding navigation of the
inode's io tree twice. Doing it at btrfs_dirty_pages() is also the most
meaninful place, as we should set the new dellaloc bit when if we set the
delalloc bit, which happens only if we copied bytes into the pages at
__btrfs_buffered_write().
This was making some of LTP's du tests fail, which can be quickly run
using a command line like the following:
$ ./runltp -q -p -l /ltp.log -f commands -s du -d /mnt
Fixes: a7e3b975a0 ("Btrfs: fix reported number of inode blocks")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Compression code path has only flaged bios with REQ_OP_WRITE no matter
where the bios come from, but it could be a sync write if fsync starts
this writeback or a normal writeback write if wb kthread starts a
periodic writeback.
It breaks the rule that sync writes and writeback writes need to be
differentiated from each other, because from the POV of block layer,
all bios need to be recognized by these flags in order to do some
management, e.g. throttlling.
This passes writeback_control to compression write path so that it can
send bios with proper flags to block layer.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs updates from David Sterba:
"There are some new user features and the usual load of invisible
enhancements or cleanups.
New features:
- extend mount options to specify zlib compression level, -o
compress=zlib:9
- v2 of ioctl "extent to inode mapping", addressing a usecase where
we want to retrieve more but inaccurate results and do the
postprocessing in userspace, aiding defragmentation or
deduplication tools
- populate compression heuristics logic, do data sampling and try to
guess compressibility by: looking for repeated patterns, counting
unique byte values and distribution, calculating Shannon entropy;
this will need more benchmarking and possibly fine tuning, but the
base should be good enough
- enable indexing for btrfs as lower filesystem in overlayfs
- speedup page cache readahead during send on large files
Internal enhancements:
- more sanity checks of b-tree items when reading them from disk
- more EINVAL/EUCLEAN fixups, missing BLK_STS_* conversion, other
errno or error handling fixes
- remove some homegrown IO-related logic, that's been obsoleted by
core block layer changes (batching, plug/unplug, own counters)
- add ref-verify, optional debugging feature to verify extent
reference accounting
- simplify code handling outstanding extents, make it more clear
where and how the accounting is done
- make delalloc reservations per-inode, simplify the code and make
the logic more straightforward
- extensive cleanup of delayed refs code
Notable fixes:
- fix send ioctl on 32bit with 64bit kernel"
* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (102 commits)
btrfs: Fix bug for misused dev_t when lookup in dev state hash table.
Btrfs: heuristic: add Shannon entropy calculation
Btrfs: heuristic: add byte core set calculation
Btrfs: heuristic: add byte set calculation
Btrfs: heuristic: add detection of repeated data patterns
Btrfs: heuristic: implement sampling logic
Btrfs: heuristic: add bucket and sample counters and other defines
Btrfs: compression: separate heuristic/compression workspaces
btrfs: move btrfs_truncate_block out of trans handle
btrfs: don't call btrfs_start_delalloc_roots in flushoncommit
btrfs: track refs in a rb_tree instead of a list
btrfs: add a comp_refs() helper
btrfs: switch args for comp_*_refs
btrfs: make the delalloc block rsv per inode
btrfs: add tracepoints for outstanding extents mods
Btrfs: rework outstanding_extents
btrfs: increase output size for LOGICAL_INO_V2 ioctl
btrfs: add a flags argument to LOGICAL_INO and call it LOGICAL_INO_V2
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents
btrfs: send: remove unused code
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since both committing transaction and writing log-tree are doing
plugging on metadata IO, we can unify to use %sync_writers to benefit
both cases, instead of checking bio_flags while writing meta blocks of
log-tree.
We can remove this bio_flags because in order to write dirty blocks,
log tree also uses btrfs_write_marked_extents(), inside which we
have enabled %sync_writers, therefore, every write goes in a
synchronous way, so does checksuming.
Please also note that, bio_flags is applied per-context while
%sync_writers is applied per-inode, so this might incur some overhead, ie.
1) while log tree is flushing its dirty blocks via
btrfs_write_marked_extents(), in which %sync_writers is increased
by one.
2) in the meantime, some writeback operations may happen upon btrfs's
metadata inode, so these writes go synchronously, too.
However, AFAICS, the overhead is not a big one while the win is that
we unify the two places that needs synchronous way and remove a
special hack/flag.
This removes the bio_flags related stuff for writing log-tree.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have reader helpers for most of the on-disk structures that use
an extent_buffer and pointer as offset into the buffer that are
read-only. We should mark them as const and, in turn, allow consumers
of these interfaces to mark the buffers const as well.
No impact on code, but serves as documentation that a buffer is intended
not to be modified.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from David Sterba:
"We've identified and fixed a silent corruption (introduced by code in
the first pull), a fixup after the blk_status_t merge and two fixes to
incremental send that Filipe has been hunting for some time"
* 'for-4.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix unexpected return value of bio_readpage_error
btrfs: btrfs_create_repair_bio never fails, skip error handling
btrfs: cloned bios must not be iterated by bio_for_each_segment_all
Btrfs: fix write corruption due to bio cloning on raid5/6
Btrfs: incremental send, fix invalid memory access
Btrfs: incremental send, fix invalid path for link commands
With blk_status_t conversion (that are now present in master),
bio_readpage_error() may return 1 as now ->submit_bio_hook() may not set
%ret if it runs without problems.
This fixes that unexpected return value by changing
btrfs_check_repairable() to return a bool instead of updating %ret, and
patch is applicable to both codebases with and without blk_status_t.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs updates from David Sterba:
"The core updates improve error handling (mostly related to bios), with
the usual incremental work on the GFP_NOFS (mis)use removal,
refactoring or cleanups. Except the two top patches, all have been in
for-next for an extensive amount of time.
User visible changes:
- statx support
- quota override tunable
- improved compression thresholds
- obsoleted mount option alloc_start
Core updates:
- bio-related updates:
- faster bio cloning
- no allocation failures
- preallocated flush bios
- more kvzalloc use, memalloc_nofs protections, GFP_NOFS updates
- prep work for btree_inode removal
- dir-item validation
- qgoup fixes and updates
- cleanups:
- removed unused struct members, unused code, refactoring
- argument refactoring (fs_info/root, caller -> callee sink)
- SEARCH_TREE ioctl docs"
* 'for-4.13-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (115 commits)
btrfs: Remove false alert when fiemap range is smaller than on-disk extent
btrfs: Don't clear SGID when inheriting ACLs
btrfs: fix integer overflow in calc_reclaim_items_nr
btrfs: scrub: fix target device intialization while setting up scrub context
btrfs: qgroup: Fix qgroup reserved space underflow by only freeing reserved ranges
btrfs: qgroup: Introduce extent changeset for qgroup reserve functions
btrfs: qgroup: Fix qgroup reserved space underflow caused by buffered write and quotas being enabled
btrfs: qgroup: Return actually freed bytes for qgroup release or free data
btrfs: qgroup: Cleanup btrfs_qgroup_prepare_account_extents function
btrfs: qgroup: Add quick exit for non-fs extents
Btrfs: rework delayed ref total_bytes_pinned accounting
Btrfs: return old and new total ref mods when adding delayed refs
Btrfs: always account pinned bytes when dropping a tree block ref
Btrfs: update total_bytes_pinned when pinning down extents
Btrfs: make BUG_ON() in add_pinned_bytes() an ASSERT()
Btrfs: make add_pinned_bytes() take an s64 num_bytes instead of u64
btrfs: fix validation of XATTR_ITEM dir items
btrfs: Verify dir_item in iterate_object_props
btrfs: Check name_len before in btrfs_del_root_ref
btrfs: Check name_len before reading btrfs_get_name
...
Introduce a new parameter, struct extent_changeset for
btrfs_qgroup_reserved_data() and its callers.
Such extent_changeset was used in btrfs_qgroup_reserve_data() to record
which range it reserved in current reserve, so it can free it in error
paths.
The reason we need to export it to callers is, at buffered write error
path, without knowing what exactly which range we reserved in current
allocation, we can free space which is not reserved by us.
This will lead to qgroup reserved space underflow.
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_qgroup_release/free_data() only returns 0 or a negative error
number (ENOMEM is the only possible error).
This is normally good enough, but sometimes we need the exact byte
count it freed/released.
Change it to return actually released/freed bytenr number instead of 0
for success.
And slightly modify related extent_changeset structure, since in btrfs
one no-hole data extent won't be larger than 128M, so "unsigned int"
is large enough for the use case.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can hardcode GFP_NOFS to btrfs_io_bio_alloc, although it means we
change it back from GFP_KERNEL in scrub. I'd rather save a few stack
bytes from not passing the gfp flags in the remaining, more imporatant,
contexts and the bio allocating API now looks more consistent.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Most callers of btrfs_bio_alloc convert from bytes to sectors. Hide that
in the helper and simplify the logic in the callsers.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass gfp_flags=GFP_NOFS and nr_vecs=BIO_MAX_PAGES.
submit_extent_page adds __GFP_HIGH that does not make a difference in
our case as it allows access to memory reserves but otherwise does not
change the constraints.
Signed-off-by: David Sterba <dsterba@suse.com>
We only pass GFP_NOFS to btrfs_bio_clone_partial, so lets hardcode it.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This adds a new helper btrfs_bio_clone_partial, it'll allocate a cloned
bio that only owns a part of the original bio's data.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead pass around the failure tree and the io tree.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Once we remove the btree_inode we won't have an inode to pass anymore,
just pass the fs_info directly and the inum since we use that to print
out the repair message.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For extent_io tree's we have carried the address_mapping of the inode
around in the io tree in order to pull the inode back out for calling
into various tree ops hooks. This works fine when everything that has
an extent_io_tree has an inode. But we are going to remove the
btree_inode, so we need to change this. Instead just have a generic
void * for private data that we can initialize with, and have all the
tree ops use that instead. This had a lot of cascading changes but
should be relatively straightforward.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor reordering of the callback prototypes ]
Signed-off-by: David Sterba <dsterba@suse.com>
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently when there are buffered writes that were not yet flushed and
they fall within allocated ranges of the file (that is, not in holes or
beyond eof assuming there are no prealloc extents beyond eof), btrfs
simply reports an incorrect number of used blocks through the stat(2)
system call (or any of its variants), regardless of mount options or
inode flags (compress, compress-force, nodatacow). This is because the
number of blocks used that is reported is based on the current number
of bytes in the vfs inode plus the number of dealloc bytes in the btrfs
inode. The later covers bytes that both fall within allocated regions
of the file and holes.
Example scenarios where the number of reported blocks is wrong while the
buffered writes are not flushed:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo1
wrote 65536/65536 bytes at offset 0
64 KiB, 16 ops; 0.0000 sec (259.336 MiB/sec and 66390.0415 ops/sec)
$ sync
$ xfs_io -c "pwrite -S 0xbb 0 64K" /mnt/sdc/foo1
wrote 65536/65536 bytes at offset 0
64 KiB, 16 ops; 0.0000 sec (192.308 MiB/sec and 49230.7692 ops/sec)
# The following should have reported 64K...
$ du -h /mnt/sdc/foo1
128K /mnt/sdc/foo1
$ sync
# After flushing the buffered write, it now reports the correct value.
$ du -h /mnt/sdc/foo1
64K /mnt/sdc/foo1
$ xfs_io -f -c "falloc -k 0 128K" -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo2
wrote 65536/65536 bytes at offset 0
64 KiB, 16 ops; 0.0000 sec (520.833 MiB/sec and 133333.3333 ops/sec)
$ sync
$ xfs_io -c "pwrite -S 0xbb 64K 64K" /mnt/sdc/foo2
wrote 65536/65536 bytes at offset 65536
64 KiB, 16 ops; 0.0000 sec (260.417 MiB/sec and 66666.6667 ops/sec)
# The following should have reported 128K...
$ du -h /mnt/sdc/foo2
192K /mnt/sdc/foo2
$ sync
# After flushing the buffered write, it now reports the correct value.
$ du -h /mnt/sdc/foo2
128K /mnt/sdc/foo2
So the number of used file blocks is simply incorrect, unlike in other
filesystems such as ext4 and xfs for example, but only while the buffered
writes are not flushed.
Fix this by tracking the number of delalloc bytes that fall within holes
and beyond eof of a file, and use instead this new counter when reporting
the number of used blocks for an inode.
Another different problem that exists is that the delalloc bytes counter
is reset when writeback starts (by clearing the EXTENT_DEALLOC flag from
the respective range in the inode's iotree) and the vfs inode's bytes
counter is only incremented when writeback finishes (through
insert_reserved_file_extent()). Therefore while writeback is ongoing we
simply report a wrong number of blocks used by an inode if the write
operation covers a range previously unallocated. While this change does
not fix this problem, it does minimizes it a lot by shortening that time
window, as the new dealloc bytes counter (new_delalloc_bytes) is only
decremented when writeback finishes right before updating the vfs inode's
bytes counter. Fully fixing this second problem is not trivial and will
be addressed later by a different patch.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make extent_io_ops::readpage_io_failed_hook callback mandatory and
define a dummy function for btrfs_extent_io_ops. As the failed IO
callback is not performance critical, the branch vs extra trade off does
not hurt.
Signed-off-by: David Sterba <dsterba@suse.com>
Some of the callbacks defined in btree_extent_io_ops and
btrfs_extent_io_ops do always exist so we don't need to check the
existence before each call. This patch just reorders the definition and
documents which are mandatory/optional.
Signed-off-by: David Sterba <dsterba@suse.com>
There's no error path in any of the instances, always return 0.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In addition to changing the signature, this patch also switches
all the functions which are used as an argument to also take btrfs_inode.
Namely those are: btrfs_get_extent and btrfs_get_extent_filemap.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can embed range_changed to the extent changeset to address following
problems:
- no need to allocate ulist dynamically, we also get rid of the GFP_NOFS
for free
- fix lack of allocation failure checking in btrfs_qgroup_reserve_data
The stack consuption where extent_changeset is used slightly increases:
before: 16
after: 16 - 8 (for pointer) + 32 (sizeof ulist) = 40
Which is bearable.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ changes to the helper separated from the following patch ]
Signed-off-by: David Sterba <dsterba@suse.com>
There are loads of functions in btrfs that accept a root parameter
but only use it to obtain an fs_info pointer. Let's convert those to
just accept an fs_info pointer directly.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We track the node sizes per-root, but they never vary from the values
in the superblock. This patch messes with the 80-column style a bit,
but subsequent patches to factor out root->fs_info into a convenience
variable fix it up again.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using copy_extent_buffer is suitable for copying betwenn buffers from an
arbitrary offset and deals with page boundaries. This is not necessary
when doing a full extent_buffer-to-extent_buffer copy. We can utilize
the copy_page helper as well.
Signed-off-by: David Sterba <dsterba@suse.com>
The only memset we do is to 0, so sink the parameter to the function and
simplify all calls. Rename the function to reflect the behaviour.
Signed-off-by: David Sterba <dsterba@suse.com>
The fsid and chunk tree uuid are always located in the first page,
we don't need the to use write_extent_buffer.
Signed-off-by: David Sterba <dsterba@suse.com>
In convert_free_space_to_{bitmaps,extents}(), we buffer the free space
bitmaps in memory and copy them directly to/from the extent buffers with
{read,write}_extent_buffer(). The extent buffer bitmap helpers use byte
granularity, which is equivalent to a little-endian bitmap. This means
that on big-endian systems, the in-memory bitmaps will be written to
disk byte-swapped. To fix this, use byte-granularity for the bitmaps in
memory.
Fixes: a5ed918285 ("Btrfs: implement the free space B-tree")
Cc: stable@vger.kernel.org # 4.5+
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nobody uses this, it makes no sense to do partial reads of extent buffers.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extend btrfs_set_extent_delalloc() and extent_clear_unlock_delalloc()
parameters for both in-band dedupe and subpage sector size patchset.
This should reduce conflict of both patchset and the effort to rebase
them.
Cc: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"We've queued up a few different fixes in here. These range from
enospc corners to fsync and quota fixes, and a few targeted at error
handling for corrupt metadata/fuzzing"
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix lockdep warning on deadlock against an inode's log mutex
Btrfs: detect corruption when non-root leaf has zero item
Btrfs: check btree node's nritems
btrfs: don't create or leak aliased root while cleaning up orphans
Btrfs: fix em leak in find_first_block_group
btrfs: do not background blkdev_put()
Btrfs: clarify do_chunk_alloc()'s return value
btrfs: fix fsfreeze hang caused by delayed iputs deal
btrfs: update btrfs_space_info's bytes_may_use timely
btrfs: divide btrfs_update_reserved_bytes() into two functions
btrfs: use correct offset for reloc_inode in prealloc_file_extent_cluster()
btrfs: qgroup: Fix qgroup incorrectness caused by log replay
btrfs: relocation: Fix leaking qgroups numbers on data extents
btrfs: qgroup: Refactor btrfs_qgroup_insert_dirty_extent()
btrfs: waiting on qgroup rescan should not always be interruptible
btrfs: properly track when rescan worker is running
btrfs: flush_space: treat return value of do_chunk_alloc properly
Btrfs: add ASSERT for block group's memory leak
btrfs: backref: Fix soft lockup in __merge_refs function
Btrfs: fix memory leak of reloc_root
This patch can fix some false ENOSPC errors, below test script can
reproduce one false ENOSPC error:
#!/bin/bash
dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=128
dev=$(losetup --show -f fs.img)
mkfs.btrfs -f -M $dev
mkdir /tmp/mntpoint
mount $dev /tmp/mntpoint
cd /tmp/mntpoint
xfs_io -f -c "falloc 0 $((64*1024*1024))" testfile
Above script will fail for ENOSPC reason, but indeed fs still has free
space to satisfy this request. Please see call graph:
btrfs_fallocate()
|-> btrfs_alloc_data_chunk_ondemand()
| bytes_may_use += 64M
|-> btrfs_prealloc_file_range()
|-> btrfs_reserve_extent()
|-> btrfs_add_reserved_bytes()
| alloc_type is RESERVE_ALLOC_NO_ACCOUNT, so it does not
| change bytes_may_use, and bytes_reserved += 64M. Now
| bytes_may_use + bytes_reserved == 128M, which is greater
| than btrfs_space_info's total_bytes, false enospc occurs.
| Note, the bytes_may_use decrease operation will be done in
| end of btrfs_fallocate(), which is too late.
Here is another simple case for buffered write:
CPU 1 | CPU 2
|
|-> cow_file_range() |-> __btrfs_buffered_write()
|-> btrfs_reserve_extent() | |
| | |
| | |
| ..... | |-> btrfs_check_data_free_space()
| |
| |
|-> extent_clear_unlock_delalloc() |
In CPU 1, btrfs_reserve_extent()->find_free_extent()->
btrfs_add_reserved_bytes() do not decrease bytes_may_use, the decrease
operation will be delayed to be done in extent_clear_unlock_delalloc().
Assume in this case, btrfs_reserve_extent() reserved 128MB data, CPU2's
btrfs_check_data_free_space() tries to reserve 100MB data space.
If
100MB > data_sinfo->total_bytes - data_sinfo->bytes_used -
data_sinfo->bytes_reserved - data_sinfo->bytes_pinned -
data_sinfo->bytes_readonly - data_sinfo->bytes_may_use
btrfs_check_data_free_space() will try to allcate new data chunk or call
btrfs_start_delalloc_roots(), or commit current transaction in order to
reserve some free space, obviously a lot of work. But indeed it's not
necessary as long as decreasing bytes_may_use timely, we still have
free space, decreasing 128M from bytes_may_use.
To fix this issue, this patch chooses to update bytes_may_use for both
data and metadata in btrfs_add_reserved_bytes(). For compress path, real
extent length may not be equal to file content length, so introduce a
ram_bytes argument for btrfs_reserve_extent(), find_free_extent() and
btrfs_add_reserved_bytes(), it's becasue bytes_may_use is increased by
file content length. Then compress path can update bytes_may_use
correctly. Also now we can discard RESERVE_ALLOC_NO_ACCOUNT, RESERVE_ALLOC
and RESERVE_FREE.
As we know, usually EXTENT_DO_ACCOUNTING is used for error path. In
run_delalloc_nocow(), for inode marked as NODATACOW or extent marked as
PREALLOC, we also need to update bytes_may_use, but can not pass
EXTENT_DO_ACCOUNTING, because it also clears metadata reservation, so
here we introduce EXTENT_CLEAR_DATA_RESV flag to indicate btrfs_clear_bit_hook()
to update btrfs_space_info's bytes_may_use.
Meanwhile __btrfs_prealloc_file_range() will call
btrfs_free_reserved_data_space() internally for both sucessful and failed
path, btrfs_prealloc_file_range()'s callers does not need to call
btrfs_free_reserved_data_space() any more.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull core block updates from Jens Axboe:
- the big change is the cleanup from Mike Christie, cleaning up our
uses of command types and modified flags. This is what will throw
some merge conflicts
- regression fix for the above for btrfs, from Vincent
- following up to the above, better packing of struct request from
Christoph
- a 2038 fix for blktrace from Arnd
- a few trivial/spelling fixes from Bart Van Assche
- a front merge check fix from Damien, which could cause issues on
SMR drives
- Atari partition fix from Gabriel
- convert cfq to highres timers, since jiffies isn't granular enough
for some devices these days. From Jan and Jeff
- CFQ priority boost fix idle classes, from me
- cleanup series from Ming, improving our bio/bvec iteration
- a direct issue fix for blk-mq from Omar
- fix for plug merging not involving the IO scheduler, like we do for
other types of merges. From Tahsin
- expose DAX type internally and through sysfs. From Toshi and Yigal
* 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits)
block: Fix front merge check
block: do not merge requests without consulting with io scheduler
block: Fix spelling in a source code comment
block: expose QUEUE_FLAG_DAX in sysfs
block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
Btrfs: fix comparison in __btrfs_map_block()
block: atari: Return early for unsupported sector size
Doc: block: Fix a typo in queue-sysfs.txt
cfq-iosched: Charge at least 1 jiffie instead of 1 ns
cfq-iosched: Fix regression in bonnie++ rewrite performance
cfq-iosched: Convert slice_resid from u64 to s64
block: Convert fifo_time from ulong to u64
blktrace: avoid using timespec
block/blk-cgroup.c: Declare local symbols static
block/bio-integrity.c: Add #include "blk.h"
block/partition-generic.c: Remove a set-but-not-used variable
block: bio: kill BIO_MAX_SIZE
cfq-iosched: temporarily boost queue priority for idle classes
block: drbd: avoid to use BIO_MAX_SIZE
block: bio: remove BIO_MAX_SECTORS
...
The bio REQ_OP and bi_rw rq_flag_bits are now always setup, so there is
no need to pass around the rq_flag_bits bits too. btrfs users should
should access the bio insead.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
self-tests code assumes 4k as the sectorsize and nodesize. This commit
fix hardcoded 4K. Enables the self-tests code to be executed on non-4k
page sized systems (e.g. ppc64).
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It seems to be long time unused, since 2008 and
6885f308b5 ("Btrfs: Misc 2.6.25 updates").
Propagating the removal touches some code but has no functional effect.
Signed-off-by: David Sterba <dsterba@suse.com>
Single caller passes GFP_NOFS. We can get rid of the
gfpflags_allow_blocking checks as NOFS can block but does not recurse to
filesystem through reclaim.
Signed-off-by: David Sterba <dsterba@suse.com>
Callers pass GFP_NOFS and tests pass GFP_KERNEL, but using NOFS there
does not hurt. No need to pass the flags around.
Signed-off-by: David Sterba <dsterba@suse.com>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Not needed after the previous patch named
"Btrfs: fix page reading in extent_same ioctl leading to csum errors".
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Sanity test the extent buffer bitmap operations (test, set, and clear)
against the equivalent standard kernel operations.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Does not return any errors, nor anything from the callgraph. There's a
BUG_ON but it's a sanity check and not an error condition we could
recover from.
Signed-off-by: David Sterba <dsterba@suse.com>
Does not return any errors, nor anything from the callgraph. There's a
BUG_ON but it's a sanity check and not an error condition we could
recover from.
Signed-off-by: David Sterba <dsterba@suse.com>
Does not return any errors, nor anything from the callgraph. The branch
in end_bio_extent_writepage has been skipped since
5fd0204355 ("Btrfs: finish ordered extents in their own thread").
Signed-off-by: David Sterba <dsterba@suse.com>
The funcions just wrap the clear_extent_bit API and generate function
calls. This increases stack consumption and may negatively affect
performance due to icache misses. We can simply make the helpers static
inline and keep the type checking and API untouched. The code slightly
decreases:
text data bss dec hex filename
938667 43670 23144 1005481 f57a9 fs/btrfs/btrfs.ko.before
939651 43670 23144 1006465 f5b81 fs/btrfs/btrfs.ko.after
Signed-off-by: David Sterba <dsterba@suse.com>
The funcions just wrap the set_extent_bit API and generate function
calls. This increases stack consumption and may negatively affect
performance due to icache misses. We can simply make the helpers static
inline and keep the type checking and API untouched. The code slightly
increases:
text data bss dec hex filename
938427 43670 23144 1005241 f56b9 fs/btrfs/btrfs.ko.before
938667 43670 23144 1005481 f57a9 fs/btrfs/btrfs.ko
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new function, btrfs_qgroup_reserve_data(), which will use
io_tree to accurate qgroup reserve, to avoid reserved space leaking.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Introduce new function clear_record_extent_bits(), which will clear bits
for given range and record the details about which ranges are cleared
and how many bytes in total it changes.
This provides the basis for later qgroup reserve codes.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Introduce new function set_record_extent_bits(), which will not only set
given bits, but also record how many bytes are changed, and detailed
range info.
This is quite important for later qgroup reserve framework.
The number of bytes will be used to do qgroup reserve, and detailed
range info will be used to cleanup for EQUOT case.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add a new structure, extent_change_set, to record how many bytes are
changed in one set/clear_extent_bits() operation, with detailed changed
ranges info.
This provides the needed facilities for later qgroup reserve framework.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
There are some op tables that can be easily made const, similarly the
sysfs feature and raid tables. This is motivated by PaX CONSTIFY plugin.
Signed-off-by: David Sterba <dsterba@suse.cz>
Currently there's a 4B hole in the structure between refs and state and there
are only 16 bits used so we can make it unsigned. This will get a better
packing and may save some stack space for local variables.
The size of extent_state gets reduced by 8B and there are usually a lot
of slab objects.
struct extent_state {
u64 start; /* 0 8 */
u64 end; /* 8 8 */
struct rb_node rb_node; /* 16 24 */
wait_queue_head_t wq; /* 40 24 */
/* --- cacheline 1 boundary (64 bytes) --- */
atomic_t refs; /* 64 4 */
/* XXX 4 bytes hole, try to pack */
long unsigned int state; /* 72 8 */
u64 private; /* 80 8 */
/* size: 88, cachelines: 2, members: 7 */
/* sum members: 84, holes: 1, sum holes: 4 */
/* last cacheline: 24 bytes */
};
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
