We've been seeing the following sporadically throughout our fleet
panic: kernel BUG at fs/btrfs/relocation.c:4584!
netversion: 5.0-0
Backtrace:
#0 [ffffc90003adb880] machine_kexec at ffffffff81041da8
#1 [ffffc90003adb8c8] __crash_kexec at ffffffff8110396c
#2 [ffffc90003adb988] crash_kexec at ffffffff811048ad
#3 [ffffc90003adb9a0] oops_end at ffffffff8101c19a
#4 [ffffc90003adb9c0] do_trap at ffffffff81019114
#5 [ffffc90003adba00] do_error_trap at ffffffff810195d0
#6 [ffffc90003adbab0] invalid_op at ffffffff81a00a9b
[exception RIP: btrfs_reloc_cow_block+692]
RIP: ffffffff8143b614 RSP: ffffc90003adbb68 RFLAGS: 00010246
RAX: fffffffffffffff7 RBX: ffff8806b9c32000 RCX: ffff8806aad00690
RDX: ffff880850b295e0 RSI: ffff8806b9c32000 RDI: ffff88084f205bd0
RBP: ffff880849415000 R8: ffffc90003adbbe0 R9: ffff88085ac90000
R10: ffff8805f7369140 R11: 0000000000000000 R12: ffff880850b295e0
R13: ffff88084f205bd0 R14: 0000000000000000 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffc90003adbbb0] __btrfs_cow_block at ffffffff813bf1cd
#8 [ffffc90003adbc28] btrfs_cow_block at ffffffff813bf4b3
#9 [ffffc90003adbc78] btrfs_search_slot at ffffffff813c2e6c
The way relocation moves data extents is by creating a reloc inode and
preallocating extents in this inode and then copying the data into these
preallocated extents. Once we've done this for all of our extents,
we'll write out these dirty pages, which marks the extent written, and
goes into btrfs_reloc_cow_block(). From here we get our current
reloc_control, which _should_ match the reloc_control for the current
block group we're relocating.
However if we get an ENOSPC in this path at some point we'll bail out,
never initiating writeback on this inode. Not a huge deal, unless we
happen to be doing relocation on a different block group, and this block
group is now rc->stage == UPDATE_DATA_PTRS. This trips the BUG_ON() in
btrfs_reloc_cow_block(), because we expect to be done modifying the data
inode. We are in fact done modifying the metadata for the data inode
we're currently using, but not the one from the failed block group, and
thus we BUG_ON().
(This happens when writeback finishes for extents from the previous
group, when we are at btrfs_finish_ordered_io() which updates the data
reloc tree (inode item, drops/adds extent items, etc).)
Fix this by writing out the reloc data inode always, and then breaking
out of the loop after that point to keep from tripping this BUG_ON()
later.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[ add note from Filipe ]
Signed-off-by: David Sterba <dsterba@suse.com>
The uptodate parameter of btrfs_writepage_endio_finish_ordered is used
to signal whether an error has occured while writing the given page.
0 signals an error, which is propagated to callees and 1 signifies
success. In end_compressed_bio_write the ->bi_status is checked and
based on it either BLK_STS_OK (0) or BLK_STS_NOTSUPP (1) are used. While
from functional point of view this is ok it's a for the poor reader of
the code, since the block layer values are conflated with the semantics
of the parameter.
Just use plain 0 or 1. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can only get <=0 from extent_write_cache_pages, add an ASSERT() for
it just in case.
Then instead of submitting the write bio even if we got some error,
check the return value first.
If we have already hit some error, just clean up the corrupted or
half-baked bio, and return error.
If there is no error so far, then call flush_write_bio() and return the
result.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function needs some extra checks on locked pages and eb. For error
handling we need to unlock locked pages and the eb.
There is a rare >0 return value branch, where all pages get locked
while write bio is not flushed.
Thankfully it's handled by the only caller, btree_write_cache_pages(),
as later write_one_eb() call will trigger submit_one_bio(). So there
shouldn't be any problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can only get @ret <= 0. Add an ASSERT() for it just in case.
Then, instead of submitting the write bio even we got some error, check
the return value first.
If we have already hit some error, just clean up the corrupted or
half-baked bio, and return error.
If there is no error so far, then call flush_write_bio() and return the
result.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since __extent_writepage() will no longer return >0 value,
(ret == AOP_WRITEPAGE_ACTIVATE) will never be true.
Kill that dead branch.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btree_write_cache_pages(), we can only get @ret <= 0.
Add an ASSERT() for it just in case.
Then instead of submitting the write bio even we got some error, check
the return value first.
If we have already hit some error, just clean up the corrupted or
half-baked bio, and return error.
If there is no error so far, then call flush_write_bio() and return the
result.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since now flush_write_bio() could return error, kill the BUG_ON() first.
Then don't call flush_write_bio() unconditionally, instead we check the
return value from __extent_writepage() first.
If __extent_writepage() fails, we do cleanup, and return error without
submitting the possible corrupted or half-baked bio.
If __extent_writepage() successes, then we call flush_write_bio() and
return the result.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a BUG_ON() in flush_write_bio() to handle the return value of
submit_one_bio().
Move the BUG_ON() one level up to all its callers.
This patch will introduce temporary variable, @flush_ret to keep code
change minimal in this patch. That variable will be cleaned up when
enhancing the error handling later.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have internal report of strange transaction abort due to EUCLEAN
without any error message.
Since error message inside verify_level_key() is only enabled for
CONFIG_BTRFS_DEBUG, the error message won't be printed on most builds.
This patch will make the error message mandatory, so when problem
happens we know what's causing the problem.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When reading a file from a fuzzed image, kernel can panic like:
BTRFS warning (device loop0): csum failed root 5 ino 270 off 0 csum 0x98f94189 expected csum 0x00000000 mirror 1
assertion failed: !memcmp_extent_buffer(b, &disk_key, offsetof(struct btrfs_leaf, items[0].key), sizeof(disk_key)), file: fs/btrfs/ctree.c, line: 2544
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3500!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:btrfs_search_slot.cold.24+0x61/0x63 [btrfs]
Call Trace:
btrfs_lookup_csum+0x52/0x150 [btrfs]
__btrfs_lookup_bio_sums+0x209/0x640 [btrfs]
btrfs_submit_bio_hook+0x103/0x170 [btrfs]
submit_one_bio+0x59/0x80 [btrfs]
extent_read_full_page+0x58/0x80 [btrfs]
generic_file_read_iter+0x2f6/0x9d0
__vfs_read+0x14d/0x1a0
vfs_read+0x8d/0x140
ksys_read+0x52/0xc0
do_syscall_64+0x60/0x210
entry_SYSCALL_64_after_hwframe+0x49/0xbe
[CAUSE]
The fuzzed image has a corrupted leaf whose first key doesn't match its
parent:
checksum tree key (CSUM_TREE ROOT_ITEM 0)
node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE
fs uuid 3381d111-94a3-4ac7-8f39-611bbbdab7e6
chunk uuid 9af1c3c7-2af5-488b-8553-530bd515f14c
...
key (EXTENT_CSUM EXTENT_CSUM 79691776) block 29761536 gen 19
leaf 29761536 items 1 free space 1726 generation 19 owner CSUM_TREE
leaf 29761536 flags 0x1(WRITTEN) backref revision 1
fs uuid 3381d111-94a3-4ac7-8f39-611bbbdab7e6
chunk uuid 9af1c3c7-2af5-488b-8553-530bd515f14c
item 0 key (EXTENT_CSUM EXTENT_CSUM 8798638964736) itemoff 1751 itemsize 2244
range start 8798638964736 end 8798641262592 length 2297856
When reading the above tree block, we have extent_buffer->refs = 2 in
the context:
- initial one from __alloc_extent_buffer()
alloc_extent_buffer()
|- __alloc_extent_buffer()
|- atomic_set(&eb->refs, 1)
- one being added to fs_info->buffer_radix
alloc_extent_buffer()
|- check_buffer_tree_ref()
|- atomic_inc(&eb->refs)
So if even we call free_extent_buffer() in read_tree_block or other
similar situation, we only decrease the refs by 1, it doesn't reach 0
and won't be freed right now.
The staled eb and its corrupted content will still be kept cached.
Furthermore, we have several extra cases where we either don't do first
key check or the check is not proper for all callers:
- scrub
We just don't have first key in this context.
- shared tree block
One tree block can be shared by several snapshot/subvolume trees.
In that case, the first key check for one subvolume doesn't apply to
another.
So for the above reasons, a corrupted extent buffer can sneak into the
buffer cache.
[FIX]
Call verify_level_key in read_block_for_search to do another
verification. For that purpose the function is exported.
Due to above reasons, although we can free corrupted extent buffer from
cache, we still need the check in read_block_for_search(), for scrub and
shared tree blocks.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202755
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202757
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202759
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202761
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202767
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202769
Reported-by: Yoon Jungyeon <jungyeon@gatech.edu>
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If a an eb fails to be read for whatever reason - it's corrupted on disk
and parent transid/key validations fail or IO for eb pages fail then
this buffer must be removed from the buffer cache. Currently the code
calls free_extent_buffer if an error occurs. Unfortunately this doesn't
achieve the desired behavior since btrfs_find_create_tree_block returns
with eb->refs == 2.
On the other hand free_extent_buffer will only decrement the refs once
leaving it added to the buffer cache radix tree. This enables later
code to look up the buffer from the cache and utilize it potentially
leading to a crash.
The correct way to free the buffer is call free_extent_buffer_stale.
This function will correctly call atomic_dec explicitly for the buffer
and subsequently call release_extent_buffer which will decrement the
final reference thus correctly remove the invalid buffer from buffer
cache. This change affects only newly allocated buffers since they have
eb->refs == 2.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202755
Reported-by: Jungyeon <jungyeon@gatech.edu>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
From the introduction of btrfs_(set|clear)_header_flag, there is no
usage of its return value. So just make it return void.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit d2311e6985 ("btrfs: relocation: Delay reloc tree deletion after
merge_reloc_roots()") expands the life span of root->reloc_root.
This breaks certain checs of fs_info->reloc_ctl. Before that commit, if
we have a root with valid reloc_root, then it's ensured to have
fs_info->reloc_ctl.
But now since reloc_root doesn't always mean a valid fs_info->reloc_ctl,
such check is unreliable and can cause the following NULL pointer
dereference:
BUG: unable to handle kernel NULL pointer dereference at 00000000000005c1
IP: btrfs_reloc_pre_snapshot+0x20/0x50 [btrfs]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 10379 Comm: snapperd Not tainted
Call Trace:
create_pending_snapshot+0xd7/0xfc0 [btrfs]
create_pending_snapshots+0x8e/0xb0 [btrfs]
btrfs_commit_transaction+0x2ac/0x8f0 [btrfs]
btrfs_mksubvol+0x561/0x570 [btrfs]
btrfs_ioctl_snap_create_transid+0x189/0x190 [btrfs]
btrfs_ioctl_snap_create_v2+0x102/0x150 [btrfs]
btrfs_ioctl+0x5c9/0x1e60 [btrfs]
do_vfs_ioctl+0x90/0x5f0
SyS_ioctl+0x74/0x80
do_syscall_64+0x7b/0x150
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7fd7cdab8467
Fix it by explicitly checking fs_info->reloc_ctl other than using the
implied root->reloc_root.
Fixes: d2311e6985 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In case we hit the error case for a metadata buffer in
end_bio_extent_readpage then 'ret' won't really be checked before it's
written again to. This means the -EIO in this case will never be
checked, just remove it.
Fixes-coverity-id: 1442513
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently extent_readpages (called from btrfs_readpages) will always
call __extent_readpages which tries to create contiguous range of pages
and call __do_contiguous_readpages when such contiguous range is
created.
It turns out this is unnecessary due to the fact that generic MM code
always calls filesystem's ->readpages callback (btrfs_readpages in
this case) with already contiguous pages. Armed with this knowledge it's
possible to simplify extent_readpages by eliminating the call to
__extent_readpages and directly calling contiguous_readpages.
The only edge case that needs to be handled is when
add_to_page_cache_lru fails. This is easy as all that is needed is to
submit whatever is the number of pages successfully added to the lru.
This can happen when the page is already in the range, so it does not
need to be read again, and we can't do anything else in case of other
errors.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The member is tracking simple status of the lock, we can use bool for
that and make some room for further space reduction in the structure.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::write_locks become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The write_locks are a simple counter to track locking balance and used
to assert tree locks. Add helpers to make it conditionally work only in
DEBUG builds. Will be used in followup patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::read_locks become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The read_locks are a simple counter to track locking balance and used to
assert tree locks. Add helpers to make it conditionally work only in
DEBUG builds. Will be used in followup patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::spining_readers become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add helpers for conditional DEBUG build to assert that the extent buffer
spinning_readers constraints are met. Will be used in followup patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::spining_writers become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add helpers for conditional DEBUG build to assert that the extent buffer
spinning_writers constraints are met. Will be used in followup patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
This flag just became synonymous to EXTENT_LOCKED, so just remove it and
used EXTENT_LOCKED directly. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This flag was introduced in a52d9a8033 ("Btrfs: Extent based page
cache code.") and subsequently it's usage effectively was removed by
1edbb734b4 ("Btrfs: reduce CPU usage in the extent_state tree") and
f2a97a9dbd ("btrfs: remove all unused functions"). Just remove it,
no functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When building with -Wsometimes-uninitialized, Clang warns:
fs/btrfs/uuid-tree.c:129:13: warning: variable 'eb' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
fs/btrfs/uuid-tree.c:129:13: warning: variable 'offset' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
Clang can't tell that all cases are covered with this final else if.
Just turn it into an else so that it is clear.
Link: https://github.com/ClangBuiltLinux/linux/issues/385
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_set_prop() takes transaction pointer as the first argument,
however in ioctl.c for the purpose of setting the compression property,
we call btrfs_set_prop() with NULL transaction pointer. Down in
the call chain btrfs_setxattr() starts transaction to update the
attribute and also to update the inode.
So for clarity, create btrfs_set_prop_trans() with no transaction
pointer as argument, in preparation to start transaction here instead of
doing it down the call chain at btrfs_setxattr().
Also now the btrfs_set_prop() is a static function.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
fs_info is commonly used to represent struct fs_info *, rename
to fs_private to avoid confusion.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Drop forward declaration of the functions:
- prop_compression_validate
- prop_compression_apply
- prop_compression_extract
No functional changes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_set_prop() is a redirect to __btrfs_set_prop() with the
transaction handle equal to NULL. __btrfs_set_prop() in turn passes
this to do_setxattr() which then transaction is actually created.
Instead merge __btrfs_set_prop() to btrfs_set_prop(), and update the
caller with NULL argument.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit c40a3d38af ("Btrfs: Compute and look up csums based on
sectorsized blocks") we do a kmap_atomic() on the contents of a bvec.
The code before c40a3d38af had the kmap region just around the
checksumming too.
kmap_atomic() in turn does a preempt_disable() and pagefault_disable(),
so we shouldn't map the data for too long. Reduce the time the bvec's
page is mapped to when we actually need it.
Performance wise it doesn't seem to make a huge difference with a 2 vcpu VM
on a /dev/zram device:
vanilla patched delta
write 17.4MiB/s 17.8MiB/s +0.4MiB/s (+2%)
read 40.6MiB/s 41.5MiB/s +0.9MiB/s (+2%)
The following fio job profile was used in the comparision:
[global]
ioengine=libaio
direct=1
sync=1
norandommap
time_based
runtime=10m
size=100m
group_reporting
numjobs=2
[test]
filename=/mnt/test/fio
rw=randrw
rwmixread=70
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although btrfs heavily relies on extent_io_tree, we don't really have
any good trace events for them.
This patch will add the folowing trace events:
- trace_btrfs_set_extent_bit()
- trace_btrfs_clear_extent_bit()
- trace_btrfs_convert_extent_bit()
Since selftests could create temporary extent_io_tree without fs_info,
modify TP_fast_assign_fsid() to accept NULL as fs_info. NULL fs_info
will lead to all zero fsid.
The output would be:
btrfs_set_extent_bit: <FDID>: io_tree=INODE_IO ino=1 root=1 start=22036480 len=4096 set_bits=LOCKED
btrfs_set_extent_bit: <FSID>: io_tree=INODE_IO ino=1 root=1 start=22040576 len=4096 set_bits=LOCKED
btrfs_set_extent_bit: <FSID>: io_tree=INODE_IO ino=1 root=1 start=22044672 len=4096 set_bits=LOCKED
btrfs_set_extent_bit: <FSID>: io_tree=INODE_IO ino=1 root=1 start=22048768 len=4096 set_bits=LOCKED
btrfs_clear_extent_bit: <FSID>: io_tree=INODE_IO ino=1 root=1 start=22036480 len=16384 clear_bits=LOCKED
^^^ Extent buffer 22036480 read from disk, the locking progress
btrfs_set_extent_bit: <FSID>: io_tree=TRANS_DIRTY_PAGES ino=1 root=1 start=30425088 len=16384 set_bits=DIRTY
btrfs_set_extent_bit: <FSID>: io_tree=TRANS_DIRTY_PAGES ino=1 root=1 start=30441472 len=16384 set_bits=DIRTY
^^^ 2 new tree blocks allocated in one transaction
btrfs_set_extent_bit: <FSID>: io_tree=FREED_EXTENTS0 ino=0 root=0 start=30523392 len=16384 set_bits=DIRTY
btrfs_set_extent_bit: <FSID>: io_tree=FREED_EXTENTS0 ino=0 root=0 start=30556160 len=16384 set_bits=DIRTY
^^^ 2 old tree blocks get pinned down
There is one point which need attention:
1) Those trace events can be pretty heavy:
The following workload would generate over 400 trace events.
mkfs.btrfs -f $dev
start_trace
mount $dev $mnt -o enospc_debug
sync
touch $mnt/file1
touch $mnt/file2
touch $mnt/file3
xfs_io -f -c "pwrite 0 16k" $mnt/file4
umount $mnt
end_trace
It's not recommended to use them in real world environment.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ rename enums ]
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs has the following different extent_io_trees used:
- fs_info::free_extents[2]
- btrfs_inode::io_tree - for both normal inodes and the btree inode
- btrfs_inode::io_failure_tree
- btrfs_transaction::dirty_pages
- btrfs_root::dirty_log_pages
If we want to trace changes in those trees, it will be pretty hard to
distinguish them.
Instead of using hard-to-read pointer address, this patch will introduce
a new member extent_io_tree::owner to track the owner.
This modification needs all the callers of extent_io_tree_init() to
accept a new parameter @owner.
This patch provides the basis for later trace events.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch is split from the following one "btrfs: Introduce
extent_io_tree::owner to distinguish different io_trees" from Qu, so the
different changes are not mixed together.
Signed-off-by: David Sterba <dsterba@suse.com>
This patch will add a new member fs_info to extent_io_tree.
This provides the basis for later trace events to distinguish the output
between different btrfs filesystems. While this increases the size of
the structure, we want to know the source of the trace events and
passing the fs_info as an argument to all contexts is not possible.
The selftests are now allowed to set it to NULL as they don't use the
tracepoints.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit db2462a6ad ("btrfs: don't run delayed refs in the end transaction
logic") removed its last use, so now it does absolutely nothing, therefore
remove it.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While calling functions inside zstd, we don't need to use the
indirection provided by the workspace_manager. Forward declarations are
added to maintain the function order of btrfs_compress_op.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The error code used here is wrong as it's not invalid to try to start
scrub when umount has begun. Returning EAGAIN is more user friendly as
it's recoverable.
Signed-off-by: David Sterba <dsterba@suse.com>
inode->i_op is initialized multiple times. Perform it once. This was
left by 4779cc0424 ("Btrfs: get rid of btrfs_symlink_aops").
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we failed to find a root key in btrfs_update_root(), we just panic.
That's definitely not cool, fix it by outputting an unique error
message, aborting current transaction and return -EUCLEAN. This should
not normally happen as the root has been used by the callers in some
way.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit d2e174d5d3 ("btrfs: document extent mapping assumptions in
checksum") we have a comment in place why map_private_extent_buffer()
can't return 1 in the csum_tree_block() case.
Make this a bit more explicit and WARN_ON() in case this this assumption
breaks.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently csum_tree_block() does two things, first it as it's name
suggests it calculates the checksum for a tree-block. But it also writes
this checksum to disk or reads an extent_buffer from disk and compares the
checksum with the calculated checksum, depending on the verify argument.
Furthermore one of the two callers passes in '1' for the verify argument,
the other one passes in '0'.
For clarity and less layering violations, factor out the second stage in
csum_tree_block()'s callers.
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=efvr
-----END PGP SIGNATURE-----
Merge tag 'for-5.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One patch to fix a crash in io submission path, due to memory
allocation errors.
In short, the multipage bio work that landed in 5.1 caused larger bios
that in turn require larger temporary memory for checksums. The patch
is a workaround, we're going to rework the allocation so it does not
require the vmalloc fallback.
It took a while to identify that it's caused by patches in 5.1 and not
a patchset that did some changes in error handling in the code. I've
tested it on various memory/cpu combinations, it could hit OOM but
does not crash.
The timestamp of the patch is less than a day due to updates in the
changelog, tests were running meanwhile"
* tag 'for-5.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Switch memory allocations in async csum calculation path to kvmalloc
Recent multi-page biovec rework allowed creation of bios that can span
large regions - up to 128 megabytes in the case of btrfs. OTOH btrfs'
submission path currently allocates a contiguous array to store the
checksums for every bio submitted. This means we can request up to
(128mb / BTRFS_SECTOR_SIZE) * 4 bytes + 32bytes of memory from kmalloc.
On busy systems with possibly fragmented memory said kmalloc can fail
which will trigger BUG_ON due to improper error handling IO submission
context in btrfs.
Until error handling is improved or bios in btrfs limited to a more
manageable size (e.g. 1m) let's use kvmalloc to fallback to vmalloc for
such large allocations. There is no hard requirement that the memory
allocated for checksums during IO submission has to be contiguous, but
this is a simple fix that does not require several non-contiguous
allocations.
For small writes this is unlikely to have any visible effect since
kmalloc will still satisfy allocation requests as usual. For larger
requests the code will just fallback to vmalloc.
We've performed evaluation on several workload types and there was no
significant difference kmalloc vs kvmalloc.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=fYo9
-----END PGP SIGNATURE-----
Merge tag 'for-5.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix parsing of compression algorithm when set as a inode property,
this could end up with eg. 'zst' or 'zli' in the value
- don't allow trim on a filesystem with unreplayed log, this could
cause data loss if there are pending updates to the block groups that
would not be subject to trim after replay
* tag 'for-5.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prop: fix vanished compression property after failed set
btrfs: prop: fix zstd compression parameter validation
Btrfs: do not allow trimming when a fs is mounted with the nologreplay option
The compression property resets to NULL, instead of the old value if we
fail to set the new compression parameter.
$ btrfs prop get /btrfs compression
compression=lzo
$ btrfs prop set /btrfs compression zli
ERROR: failed to set compression for /btrfs: Invalid argument
$ btrfs prop get /btrfs compression
This is because the compression property ->validate() is successful for
'zli' as the strncmp() used the length passed from the userspace.
Fix it by using the expected string length in strncmp().
Fixes: 63541927c8 ("Btrfs: add support for inode properties")
Fixes: 5c1aab1dd5 ("btrfs: Add zstd support")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We let pass zstd compression parameter even if it is not fully valid.
For example:
$ btrfs prop set /btrfs compression zst
$ btrfs prop get /btrfs compression
compression=zst
zlib and lzo are fine.
Fix it by checking the correct prefix length.
Fixes: 5c1aab1dd5 ("btrfs: Add zstd support")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Whan a filesystem is mounted with the nologreplay mount option, which
requires it to be mounted in RO mode as well, we can not allow discard on
free space inside block groups, because log trees refer to extents that
are not pinned in a block group's free space cache (pinning the extents is
precisely the first phase of replaying a log tree).
So do not allow the fitrim ioctl to do anything when the filesystem is
mounted with the nologreplay option, because later it can be mounted RW
without that option, which causes log replay to happen and result in
either a failure to replay the log trees (leading to a mount failure), a
crash or some silent corruption.
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Fixes: 96da09192c ("btrfs: Introduce new mount option to disable tree log replay")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>