Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
Note, you will get a conflict merging with your tree in the
Documentation/devicetree/bindings/serial/rs485.yaml file, but it should
be pretty obvious what to do. If not, I'm sure Rob will clean it all up
afterwards :)
All of these have been in linux-next with no issues for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzpCg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRxACgjGtOKPjahONL4lWd0F8ZYEcyw7sAn34woBCO
BDUV3kolrRQ4OYNJWsHP
=TvqG
-----END PGP SIGNATURE-----
Merge tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
All of these have been in linux-next with no issues for a while"
* tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
tty: serial: imx: clear Ageing Timer Interrupt in handler
serial: 8250_fintek: Add F81966 Support
sc16is7xx: Add flag to activate IrDA mode
dt-bindings: sc16is7xx: Add flag to activate IrDA mode
serial: 8250: Support rs485 bus termination GPIO
serial: 8520_port: Fix function param documentation
dt-bindings: serial: Add binding for rs485 bus termination GPIO
vt: keyboard: avoid signed integer overflow in k_ascii
serial: 8250: Enable 16550A variants by default on non-x86
tty: hvc_console, fix crashes on parallel open/close
serial: imx: Initialize lock for non-registered console
sc16is7xx: Read the LSR register for basic device presence check
sc16is7xx: Allow sharing the IRQ line
sc16is7xx: Use threaded IRQ
sc16is7xx: Always use falling edge IRQ
tty: n_gsm: Fix bogus i++ in gsm_data_kick
tty: n_gsm: Remove unnecessary test in gsm_print_packet()
serial: stm32: add no_console_suspend support
tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
...
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
-----BEGIN PGP SIGNATURE-----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=GKe5
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is
updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when
CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
* tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
kbuild: add variables for compression tools
Makefile: install modules.builtin even if CONFIG_MODULES=n
mksysmap: Fix the mismatch of '.L' symbols in System.map
kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
modpost: change elf_info->size to size_t
modpost: remove is_vmlinux() helper
modpost: strip .o from modname before calling new_module()
modpost: set have_vmlinux in new_module()
modpost: remove mod->skip struct member
modpost: add mod->is_vmlinux struct member
modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
modpost: remove mod->is_dot_o struct member
modpost: move -d option in scripts/Makefile.modpost
modpost: remove -s option
modpost: remove get_next_text() and make {grab,release_}file static
modpost: use read_text_file() and get_line() for reading text files
modpost: avoid false-positive file open error
modpost: fix potential mmap'ed file overrun in get_src_version()
modpost: add read_text_file() and get_line() helpers
modpost: do not call get_modinfo() for vmlinux(.o)
...
- enhance the dma pool to allow atomic allocation on x86 with AMD SEV
(David Rientjes)
- two small cleanups (Jason Yan and Peter Collingbourne)
-----BEGIN PGP SIGNATURE-----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=GT3J
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- enhance the dma pool to allow atomic allocation on x86 with AMD SEV
(David Rientjes)
- two small cleanups (Jason Yan and Peter Collingbourne)
* tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: fix comment for dma_release_from_contiguous
dma-pool: scale the default DMA coherent pool size with memory capacity
x86/mm: unencrypted non-blocking DMA allocations use coherent pools
dma-pool: add pool sizes to debugfs
dma-direct: atomic allocations must come from atomic coherent pools
dma-pool: dynamically expanding atomic pools
dma-pool: add additional coherent pools to map to gfp mask
dma-remap: separate DMA atomic pools from direct remap code
dma-debug: make __dma_entry_alloc_check_leak() static
Pull workqueue updates from Tejun Heo:
"Mostly cleanups and other trivial changes.
The only interesting change is Sebastian's rcuwait conversion for RT"
* 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: use BUILD_BUG_ON() for compile time test instead of WARN_ON()
workqueue: fix a piece of comment about reserved bits for work flags
workqueue: remove useless unlock() and lock() in series
workqueue: void unneeded requeuing the pwq in rescuer thread
workqueue: Convert the pool::lock and wq_mayday_lock to raw_spinlock_t
workqueue: Use rcuwait for wq_manager_wait
workqueue: Remove unnecessary kfree() call in rcu_free_wq()
workqueue: Fix an use after free in init_rescuer()
workqueue: Use IS_ERR and PTR_ERR instead of PTR_ERR_OR_ZERO.
Pull cgroup updates from Tejun Heo:
"Just two patches: one to add system-level cpu.stat to the root cgroup
for convenience and a trivial comment update"
* 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: add cpu.stat file to root cgroup
cgroup: Remove stale comments
Allow user to use alternative implementations of compression tools,
such as pigz, pbzip2, pxz. For example, multi-threaded tools to
speed up the build:
$ make GZIP=pigz BZIP2=pbzip2
Variables _GZIP, _BZIP2, _LZOP are used internally because original env
vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
since 2015. However, alternative implementations (e.g., pigz) still rely
on it. BZIP2, BZIP, LZOP vars are not obsolescent.
The credit goes to @grsecurity.
As a sidenote, for multi-threaded lzma, xz compression one can use:
$ export XZ_OPT="--threads=0"
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The PREEMPTIRQ_EVENTS option is unused after commit c3bc8fd637 ("tracing:
Centralize preemptirq tracepoints and unify their usage"). Remove it.
Note that this option is hazardous as it stands. It enables TRACE_IRQFLAGS
event on non-preempt configurations without the irqsoff tracer enabled.
TRACE_IRQFLAGS as it stands incurs significant overhead on each IRQ
entry/exit. This is because trace_hardirqs_[on|off] does all the per-cpu
manipulations and NMI checks even if tracing is completely disabled for
some insane reason. For example, netperf running UDP_STREAM on localhost
incurs a 4-6% performance penalty without any tracing if IRQFLAGS is
set. It can be put behind a static brach but even the function entry/exit
costs a little bit.
Link: https://lkml.kernel.org/r/20200409104034.GJ3818@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to make it
safe against parallel page table manipulations without relying on an IPI for
serialisation.
- A series of fixes & enhancements to make our machine check handling more
robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions on
Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
Sang, Xiongfeng Wang.
-----BEGIN PGP SIGNATURE-----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=o0WU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
Summary of modules changes for the 5.8 merge window:
- Harden CONFIG_STRICT_MODULE_RWX by rejecting any module that has
SHF_WRITE|SHF_EXECINSTR sections
- Remove and clean up nested #ifdefs, as it makes code hard to read
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=OlVv
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Harden CONFIG_STRICT_MODULE_RWX by rejecting any module that has
SHF_WRITE|SHF_EXECINSTR sections
- Remove and clean up nested #ifdefs, as it makes code hard to read
* tag 'modules-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Harden STRICT_MODULE_RWX
module: break nested ARCH_HAS_STRICT_MODULE_RWX and STRICT_MODULE_RWX #ifdefs
'swsusp_header_init()' is only called via 'core_initcall'.
It can be marked as __init to save a few bytes of memory.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function blk_log_remap() can be simplified by removing the
call to get_pdu_remap() that copies the values into extra variable to
print the data, which also fixes the endiannness warning reported by
sparse.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In function get_pdu_len() replace variable type from __u64 to
__be64. This fixes sparse warning.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In blk_add_trace_spliti() blk_add_trace_bio_remap() use
blk_status_to_errno() to pass the error instead of pasing the bi_status.
This fixes the sparse warning.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The status can be trivially derived from the bio itself. That also avoid
callers like NVMe to incorrectly pass a blk_status_t instead of the errno,
and the overhead of translating the blk_status_t to the errno in the I/O
completion fast path when no tracing is enabled.
Fixes: 35fe0d12c8 ("nvme: trace bio completion")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* The remainder of the code necessary to support the Kendryte K210.
* Support for building device trees into the kernel, as the K210 doesn't
have a bootloader that provides one.
* A K210 device tree and the associated defconfig update.
* Support for skipping PMP initialization on systems that trap on PMP
accesses rather than treating them as WARL.
* Support for KGDB.
* Improvements to text patching.
* Some cleanups to the SiFive L2 cache driver.
I may have a second part, but I wanted to get this out earlier rather than
later as they've been ready to go for a while now.
-----BEGIN PGP SIGNATURE-----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=keTq
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The remainder of the code necessary to support the Kendryte K210:
* Support for building device trees into the kernel, as the K210
doesn't have a bootloader that provides one
* A K210 device tree and the associated defconfig update
* Support for skipping PMP initialization on systems that trap on
PMP accesses rather than treating them as WARL
- Support for KGDB
- Improvements to text patching
- Some cleanups to the SiFive L2 cache driver
* tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
soc: sifive: l2 cache: Mark l2_get_priv_group as static
soc: sifive: l2 cache: Eliminate an unsigned zero compare warning
riscv: Add support to determine no. of L2 cache way enabled
riscv: cacheinfo: Implement cache_get_priv_group with a generic ops structure
riscv: Use text_mutex instead of patch_lock
riscv: Use NOKPROBE_SYMBOL() instead of __krpobes annotation
riscv: Remove the 'riscv_' prefix of function name
riscv: Add SW single-step support for KDB
riscv: Use the XML target descriptions to report 3 system registers
riscv: Add KGDB support
kgdb: Add kgdb_has_hit_break function
RISC-V: Skip setting up PMPs on traps
riscv: K210: Update defconfig
riscv: K210: Add a built-in device tree
riscv: Allow device trees to be built into the kernel
These are updates to SoC specific drivers that did not have
another subsystem maintainer tree to go through for some
reason:
- Some bus and memory drivers for the MIPS P5600 based
Baikal-T1 SoC that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3,
Qualcomm MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas
RZ/G1H, and Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC
as a transport.
- Mediatek platforms now use a new driver for their "MMSYS"
hardware block that controls clocks and some other aspects
in behalf of the media and gpu drivers.
- Some Tegra processors have improved power management
support, including getting woken up by the PMIC and cluster
power down during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon,
Mediatek, and Tegra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=44Jc
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
Merge yet more updates from Andrew Morton:
- More MM work. 100ish more to go. Mike Rapoport's "mm: remove
__ARCH_HAS_5LEVEL_HACK" series should fix the current ppc issue
- Various other little subsystems
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits)
lib/ubsan.c: fix gcc-10 warnings
tools/testing/selftests/vm: remove duplicate headers
selftests: vm: pkeys: fix multilib builds for x86
selftests: vm: pkeys: use the correct page size on powerpc
selftests/vm/pkeys: override access right definitions on powerpc
selftests/vm/pkeys: test correct behaviour of pkey-0
selftests/vm/pkeys: introduce a sub-page allocator
selftests/vm/pkeys: detect write violation on a mapped access-denied-key page
selftests/vm/pkeys: associate key on a mapped page and detect write violation
selftests/vm/pkeys: associate key on a mapped page and detect access violation
selftests/vm/pkeys: improve checks to determine pkey support
selftests/vm/pkeys: fix assertion in test_pkey_alloc_exhaust()
selftests/vm/pkeys: fix number of reserved powerpc pkeys
selftests/vm/pkeys: introduce powerpc support
selftests/vm/pkeys: introduce generic pkey abstractions
selftests: vm: pkeys: use the correct huge page size
selftests/vm/pkeys: fix alloc_random_pkey() to make it really random
selftests/vm/pkeys: fix assertion in pkey_disable_set/clear()
selftests/vm/pkeys: fix pkey_disable_clear()
selftests: vm: pkeys: add helpers for pkey bits
...
When reading, read_pos should start with bytes_consumed, not file->f_pos.
Because when there is more than one reader, the read_pos corresponding to
file->f_pos may have been consumed, which will cause the data that has
been consumed to be read and the bytes_consumed update error.
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jann Horn <jannh@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>e
Link: http://lkml.kernel.org/r/1579691175-28949-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alloc_percpu() may return NULL, which means chan->buf may be set to NULL.
In that case, when we do *per_cpu_ptr(chan->buf, ...), we dereference an
invalid pointer:
BUG: Unable to handle kernel data access at 0x7dae0000
Faulting instruction address: 0xc0000000003f3fec
...
NIP relay_open+0x29c/0x600
LR relay_open+0x270/0x600
Call Trace:
relay_open+0x264/0x600 (unreliable)
__blk_trace_setup+0x254/0x600
blk_trace_setup+0x68/0xa0
sg_ioctl+0x7bc/0x2e80
do_vfs_ioctl+0x13c/0x1300
ksys_ioctl+0x94/0x130
sys_ioctl+0x48/0xb0
system_call+0x5c/0x68
Check if alloc_percpu returns NULL.
This was found by syzkaller both on x86 and powerpc, and the reproducer
it found on powerpc is capable of hitting the issue as an unprivileged
user.
Fixes: 017c59c042 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Reported-by: syzbot+1e925b4b836afe85a1c6@syzkaller-ppc64.appspotmail.com
Reported-by: syzbot+587b2421926808309d21@syzkaller-ppc64.appspotmail.com
Reported-by: syzbot+58320b7171734bf79d26@syzkaller.appspotmail.com
Reported-by: syzbot+d6074fb08bdb2e010520@syzkaller.appspotmail.com
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Cc: <stable@vger.kernel.org> [4.10+]
Link: http://lkml.kernel.org/r/20191219121256.26480-1-dja@axtens.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the following sparse warning:
kernel/user.c:85:19: warning: symbol 'uidhash_table' was not declared.
Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200413082146.22737-1-yanaijie@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Memory flagged with IORESOURCE_MEM_DRIVER_MANAGED is special - it won't be
part of the initial memmap of the kexec kernel and not all memory might be
accessible. Don't place any kexec images onto it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: http://lkml.kernel.org/r/20200508084217.9160-4-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This change extends kcov remote coverage support to allow collecting
coverage from soft interrupts in addition to kernel background threads.
To collect coverage from code that is executed in softirq context, a part
of that code has to be annotated with kcov_remote_start/stop() in a
similar way as how it is done for global kernel background threads. Then
the handle used for the annotations has to be passed to the
KCOV_REMOTE_ENABLE ioctl.
Internally this patch adjusts the __sanitizer_cov_trace_pc() compiler
inserted callback to not bail out when called from softirq context.
kcov_remote_start/stop() are updated to save/restore the current per task
kcov state in a per-cpu area (in case the softirq came when the kernel was
already collecting coverage in task context). Coverage from softirqs is
collected into pre-allocated per-cpu areas, whose size is controlled by
the new CONFIG_KCOV_IRQ_AREA_SIZE.
[andreyknvl@google.com: turn current->kcov_softirq into unsigned int to fix objtool warning]
Link: http://lkml.kernel.org/r/841c778aa3849c5cb8c3761f56b87ce653a88671.1585233617.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Elver <elver@google.com>
Link: http://lkml.kernel.org/r/469bd385c431d050bc38a593296eff4baae50666.1584655448.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently kcov_remote_start() and kcov_remote_stop() check t->kcov to find
out whether the coverage is already being collected by the current task.
Use t->kcov_mode for that instead. This doesn't change the overall
behavior in any way, but serves as a preparation for the following softirq
coverage collection support patch.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexander Potapenko <glider@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Link: http://lkml.kernel.org/r/f70377945d1d8e6e4916cbce871a12303d6186b4.1585233617.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/ee1a1dec43059da5d7664c85c1addc89c4cd58de.1584655448.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If vmalloc() fails in kcov_remote_start() we'll access remote->kcov
without holding kcov_remote_lock, so remote might potentially be freed at
that point. Cache kcov pointer in a local variable.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexander Potapenko <glider@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Link: http://lkml.kernel.org/r/9d9134359725a965627b7e8f2652069f86f1d1fa.1585233617.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/de0d3d30ff90776a2a509cc34c7c1c7521bda125.1584655448.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This code returns success if the "info_aux" allocation fails but it
should return -ENOMEM.
Fixes: 8c1b6e69dc ("bpf: Compare BTF types of functions arguments with actual types")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200604085436.GA943001@mwanda
Pull execve updates from Eric Biederman:
"Last cycle for the Nth time I ran into bugs and quality of
implementation issues related to exec that could not be easily be
fixed because of the way exec is implemented. So I have been digging
into exec and cleanup up what I can.
I don't think I have exec sorted out enough to fix the issues I
started with but I have made some headway this cycle with 4 sets of
changes.
- promised cleanups after introducing exec_update_mutex
- trivial cleanups for exec
- control flow simplifications
- remove the recomputation of bprm->cred
The net result is code that is a bit easier to understand and work
with and a decrease in the number of lines of code (if you don't count
the added tests)"
* 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (24 commits)
exec: Compute file based creds only once
exec: Add a per bprm->file version of per_clear
binfmt_elf_fdpic: fix execfd build regression
selftests/exec: Add binfmt_script regression test
exec: Remove recursion from search_binary_handler
exec: Generic execfd support
exec/binfmt_script: Don't modify bprm->buf and then return -ENOEXEC
exec: Move the call of prepare_binprm into search_binary_handler
exec: Allow load_misc_binary to call prepare_binprm unconditionally
exec: Convert security_bprm_set_creds into security_bprm_repopulate_creds
exec: Factor security_bprm_creds_for_exec out of security_bprm_set_creds
exec: Teach prepare_exec_creds how exec treats uids & gids
exec: Set the point of no return sooner
exec: Move handling of the point of no return to the top level
exec: Run sync_mm_rss before taking exec_update_mutex
exec: Fix spelling of search_binary_handler in a comment
exec: Move the comment from above de_thread to above unshare_sighand
exec: Rename flush_old_exec begin_new_exec
exec: Move most of setup_new_exec into flush_old_exec
exec: In setup_new_exec cache current in the local variable me
...
Pull proc updates from Eric Biederman:
"This has four sets of changes:
- modernize proc to support multiple private instances
- ensure we see the exit of each process tid exactly
- remove has_group_leader_pid
- use pids not tasks in posix-cpu-timers lookup
Alexey updated proc so each mount of proc uses a new superblock. This
allows people to actually use mount options with proc with no fear of
messing up another mount of proc. Given the kernel's internal mounts
of proc for things like uml this was a real problem, and resulted in
Android's hidepid mount options being ignored and introducing security
issues.
The rest of the changes are small cleanups and fixes that came out of
my work to allow this change to proc. In essence it is swapping the
pids in de_thread during exec which removes a special case the code
had to handle. Then updating the code to stop handling that special
case"
* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: proc_pid_ns takes super_block as an argument
remove the no longer needed pid_alive() check in __task_pid_nr_ns()
posix-cpu-timers: Replace __get_task_for_clock with pid_for_clock
posix-cpu-timers: Replace cpu_timer_pid_type with clock_pid_type
posix-cpu-timers: Extend rcu_read_lock removing task_struct references
signal: Remove has_group_leader_pid
exec: Remove BUG_ON(has_group_leader_pid)
posix-cpu-timer: Unify the now redundant code in lookup_task
posix-cpu-timer: Tidy up group_leader logic in lookup_task
proc: Ensure we see the exit of each process tid exactly once
rculist: Add hlists_swap_heads_rcu
proc: Use PIDTYPE_TGID in next_tgid
Use proc_pid_ns() to get pid_namespace from the proc superblock
proc: use named enums for better readability
proc: use human-readable values for hidepid
docs: proc: add documentation for "hidepid=4" and "subset=pid" options and new mount behavior
proc: add option to mount only a pids subset
proc: instantiate only pids that we can ptrace on 'hidepid=4' mount option
proc: allow to mount many instances of proc in one pid namespace
proc: rename struct proc_fs_info to proc_fs_opts
Pull livepatching updates from Jiri Kosina:
- simplifications and improvements for issues Peter Ziljstra found
during his previous work on W^X cleanups.
This allows us to remove livepatch arch-specific .klp.arch sections
and add proper support for jump labels in patched code.
Also, this patchset removes the last module_disable_ro() usage in the
tree.
Patches from Josh Poimboeuf and Peter Zijlstra
- a few other minor cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
MAINTAINERS: add lib/livepatch to LIVE PATCHING
livepatch: add arch-specific headers to MAINTAINERS
livepatch: Make klp_apply_object_relocs static
MAINTAINERS: adjust to livepatch .klp.arch removal
module: Make module_enable_ro() static again
x86/module: Use text_mutex in apply_relocate_add()
module: Remove module_disable_ro()
livepatch: Remove module_disable_ro() usage
x86/module: Use text_poke() for late relocations
s390/module: Use s390_kernel_write() for late relocations
s390: Change s390_kernel_write() return type to match memcpy()
livepatch: Prevent module-specific KLP rela sections from referencing vmlinux symbols
livepatch: Remove .klp.arch
livepatch: Apply vmlinux-specific KLP relocations early
livepatch: Disallow vmlinux.ko
Fix the SCS debug usage check so that we report the number of bytes
used, rather than the number of entries.
Fixes: 5bbaf9d1fc ("scs: Add support for stack usage debugging")
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Will Deacon <will@kernel.org>
Merge more updates from Andrew Morton:
"More mm/ work, plenty more to come
Subsystems affected by this patch series: slub, memcg, gup, kasan,
pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs,
thp, mmap, kconfig"
* akpm: (131 commits)
arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
riscv: support DEBUG_WX
mm: add DEBUG_WX support
drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup
mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid()
powerpc/mm: drop platform defined pmd_mknotpresent()
mm: thp: don't need to drain lru cache when splitting and mlocking THP
hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs
sparc32: register memory occupied by kernel as memblock.memory
include/linux/memblock.h: fix minor typo and unclear comment
mm, mempolicy: fix up gup usage in lookup_node
tools/vm/page_owner_sort.c: filter out unneeded line
mm: swap: memcg: fix memcg stats for huge pages
mm: swap: fix vmstats for huge pages
mm: vmscan: limit the range of LRU type balancing
mm: vmscan: reclaim writepage is IO cost
mm: vmscan: determine anon/file pressure balance at the reclaim root
mm: balance LRU lists based on relative thrashing
mm: only count actual rotations as LRU reclaim cost
...
With the advent of fast random IO devices (SSDs, PMEM) and in-memory swap
devices such as zswap, it's possible for swap to be much faster than
filesystems, and for swapping to be preferable over thrashing filesystem
caches.
Allow setting swappiness - which defines the rough relative IO cost of
cache misses between page cache and swap-backed pages - to reflect such
situations by making the swap-preferred range configurable.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-4-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Swapin faults were the last event to charge pages after they had already
been put on the LRU list. Now that we charge directly on swapin, the
lrucare portion of the charge code is unused.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-19-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the page->mapping requirement gone from memcg, we can charge anon and
file-thp pages in one single step, right after they're allocated.
This removes two out of three API calls - especially the tricky commit
step that needed to happen at just the right time between when the page is
"set up" and when it's "published" - somewhat vague and fluid concepts
that varied by page type. All we need is a freshly allocated page and a
memcg context to charge.
v2: prevent double charges on pre-allocated hugepages in khugepaged
[hannes@cmpxchg.org: Fix crash - *hpage could be ERR_PTR instead of NULL]
Link: http://lkml.kernel.org/r/20200512215813.GA487759@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/20200508183105.225460-13-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Memcg maintains a private MEMCG_RSS counter. This divergence from the
generic VM accounting means unnecessary code overhead, and creates a
dependency for memcg that page->mapping is set up at the time of charging,
so that page types can be told apart.
Convert the generic accounting sites to mod_lruvec_page_state and friends
to maintain the per-cgroup vmstat counter of NR_ANON_MAPPED. We use
lock_page_memcg() to stabilize page->mem_cgroup during rmap changes, the
same way we do for NR_FILE_MAPPED.
With the previous patch removing MEMCG_CACHE and the private NR_SHMEM
counter, this patch finally eliminates the need to have page->mapping set
up at charge time. However, we need to have page->mem_cgroup set up by
the time rmap runs and does the accounting, so switch the commit and the
rmap callbacks around.
v2: fix temporary accounting bug by switching rmap<->commit (Joonsoo)
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-11-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The memcg charging API carries a boolean @compound parameter that tells
whether the page we're dealing with is a hugepage.
mem_cgroup_commit_charge() has another boolean @lrucare that indicates
whether the page needs LRU locking or not while charging. The majority of
callsites know those parameters at compile time, which results in a lot of
naked "false, false" argument lists. This makes for cryptic code and is a
breeding ground for subtle mistakes.
Thankfully, the huge page state can be inferred from the page itself and
doesn't need to be passed along. This is safe because charging completes
before the page is published and somebody may split it.
Simplify the callsites by removing @compound, and let memcg infer the
state by using hpage_nr_pages() unconditionally. That function does
PageTransHuge() to identify huge pages, which also helpfully asserts that
nobody passes in tail pages by accident.
The following patches will introduce a new charging API, best not to carry
over unnecessary weight.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-4-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sometimes the kernel doesn't take full advantage of system memory
bandwidth, leading to a single CPU spending excessive time in
initialization paths where the data scales with memory size.
Multithreading naturally addresses this problem.
Extend padata, a framework that handles many parallel yet singlethreaded
jobs, to also handle multithreaded jobs by adding support for splitting up
the work evenly, specifying a minimum amount of work that's appropriate
for one helper thread to do, load balancing between helpers, and
coordinating them.
This is inspired by work from Pavel Tatashin and Steve Sistare.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-5-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
padata allocates per-CPU, per-instance work structs for parallel jobs. A
do_parallel call assigns a job to a sequence number and hashes the number
to a CPU, where the job will eventually run using the corresponding work.
This approach fit with how padata used to bind a job to each CPU
round-robin, makes less sense after commit bfde23ce20 ("padata: unbind
parallel jobs from specific CPUs") because a work isn't bound to a
particular CPU anymore, and isn't needed at all for multithreaded jobs
because they don't have sequence numbers.
Replace the per-CPU works with a preallocated pool, which allows sharing
them between existing padata users and the upcoming multithreaded user.
The pool will also facilitate setting NUMA-aware concurrency limits with
later users.
The pool is sized according to the number of possible CPUs. With this
limit, MAX_OBJ_NUM no longer makes sense, so remove it.
If the global pool is exhausted, a parallel job is run in the current task
instead to throttle a system trying to do too much in parallel.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-4-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
padata will soon initialize the system's struct pages in parallel, so it
needs to be ready by page_alloc_init_late().
The error return from padata_driver_init() triggers an initcall warning,
so add a warning to padata_init() to avoid silent failure.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-3-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "padata: parallelize deferred page init", v3.
Deferred struct page init is a bottleneck in kernel boot--the biggest for
us and probably others. Optimizing it maximizes availability for
large-memory systems and allows spinning up short-lived VMs as needed
without having to leave them running. It also benefits bare metal
machines hosting VMs that are sensitive to downtime. In projects such as
VMM Fast Restart[1], where guest state is preserved across kexec reboot,
it helps prevent application and network timeouts in the guests.
So, multithread deferred init to take full advantage of system memory
bandwidth.
Extend padata, a framework that handles many parallel singlethreaded jobs,
to handle multithreaded jobs as well by adding support for splitting up
the work evenly, specifying a minimum amount of work that's appropriate
for one helper thread to do, load balancing between helpers, and
coordinating them. More documentation in patches 4 and 8.
This series is the first step in a project to address other memory
proportional bottlenecks in the kernel such as pmem struct page init, vfio
page pinning, hugetlb fallocate, and munmap. Deferred page init doesn't
require concurrency limits, resource control, or priority adjustments like
these other users will because it happens during boot when the system is
otherwise idle and waiting for page init to finish.
This has been run on a variety of x86 systems and speeds up kernel boot by
4% to 49%, saving up to 1.6 out of 4 seconds. Patch 6 has more numbers.
This patch (of 8):
padata_driver_exit() is unnecessary because padata isn't built as a module
and doesn't exit.
padata's init routine will soon allocate memory, so getting rid of the
exit function now avoids pointless code to free it.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-1-daniel.m.jordan@oracle.com
Link: http://lkml.kernel.org/r/20200527173608.2885243-2-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested virtualization
- Nested AMD event injection facelift, building on the rework of generic code
and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page fault
work, will come next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7VJcYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPf6QgAq4wU5wdd1lTGz/i3DIhNVJNJgJlp
ozLzRdMaJbdbn5RpAK6PEBd9+pt3+UlojpFB3gpJh2Nazv2OzV4yLQgXXXyyMEx1
5Hg7b4UCJYDrbkCiegNRv7f/4FWDkQ9dx++RZITIbxeskBBCEI+I7GnmZhGWzuC4
7kj4ytuKAySF2OEJu0VQF6u0CvrNYfYbQIRKBXjtOwuRK4Q6L63FGMJpYo159MBQ
asg3B1jB5TcuGZ9zrjL5LkuzaP4qZZHIRs+4kZsH9I6MODHGUxKonrkablfKxyKy
CFK+iaHCuEXXty5K0VmWM3nrTfvpEjVjbMc7e1QGBQ5oXsDM0pqn84syRg==
=v7Wn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested
virtualization
- Nested AMD event injection facelift, building on the rework of
generic code and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch
with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host
side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page
fault work, will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
KVM: check userspace_addr for all memslots
KVM: selftests: update hyperv_cpuid with SynDBG tests
x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
x86/kvm/hyper-v: Add support for synthetic debugger interface
x86/hyper-v: Add synthetic debugger definitions
KVM: selftests: VMX preemption timer migration test
KVM: nVMX: Fix VMX preemption timer migration
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
KVM: x86/pmu: Support full width counting
KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
KVM: x86: acknowledgment mechanism for async pf page ready notifications
KVM: x86: interrupt based APF 'page ready' event delivery
KVM: introduce kvm_read_guest_offset_cached()
KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
KVM: VMX: Replace zero-length array with flexible-array
...
By far the biggest change in this cycle are the changes that allow much
earlier debug of systems that are hooked up via UART by taking advantage
of the earlycon framework to implement the kgdb I/O hooks before handing
over to the regular polling I/O drivers once they are available. When
discussing Doug's work we also found and fixed an broken
raw_smp_processor_id() sequence in in_dbg_master().
Also included are a collection of much smaller fixes and tweaks: a
couple of tweaks to ged rid of doc gen or coccicheck warnings, future
proof some internal calculations that made implicit power-of-2
assumptions and eliminate some rather weird handling of magic
environment variables in kdb.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=uLAB
-----END PGP SIGNATURE-----
Merge tag 'kgdb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"By far the biggest change in this cycle are the changes that allow
much earlier debug of systems that are hooked up via UART by taking
advantage of the earlycon framework to implement the kgdb I/O hooks
before handing over to the regular polling I/O drivers once they are
available. When discussing Doug's work we also found and fixed an
broken raw_smp_processor_id() sequence in in_dbg_master().
Also included are a collection of much smaller fixes and tweaks: a
couple of tweaks to ged rid of doc gen or coccicheck warnings, future
proof some internal calculations that made implicit power-of-2
assumptions and eliminate some rather weird handling of magic
environment variables in kdb"
* tag 'kgdb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Remove the misfeature 'KDBFLAGS'
kdb: Cleanup math with KDB_CMD_HISTORY_COUNT
serial: amba-pl011: Support kgdboc_earlycon
serial: 8250_early: Support kgdboc_earlycon
serial: qcom_geni_serial: Support kgdboc_earlycon
serial: kgdboc: Allow earlycon initialization to be deferred
Documentation: kgdboc: Document new kgdboc_earlycon parameter
kgdb: Don't call the deinit under spinlock
kgdboc: Disable all the early code when kgdboc is a module
kgdboc: Add kgdboc_earlycon to support early kgdb using boot consoles
kgdboc: Remove useless #ifdef CONFIG_KGDB_SERIAL_CONSOLE in kgdboc
kgdb: Prevent infinite recursive entries to the debugger
kgdb: Delay "kgdbwait" to dbg_late_init() by default
kgdboc: Use a platform device to handle tty drivers showing up late
Revert "kgdboc: disable the console lock when in kgdb"
kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb
kgdb: Return true in kgdb_nmi_poll_knock()
kgdb: Drop malformed kernel doc comment
kgdb: Fix spurious true from in_dbg_master()
Pull parsic updates from Helge Deller:
"Enable the sysctl file interface for panic_on_stackoverflow for
parisc, a warning fix and a bunch of documentation updates since the
parisc website is now at https://parisc.wiki.kernel.org"
* 'parisc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: MAINTAINERS: Update references to parisc website
parisc: module: Update references to parisc website
parisc: hardware: Update references to parisc website
parisc: firmware: Update references to parisc website
parisc: Kconfig: Update references to parisc website
parisc: add sysctl file interface panic_on_stackoverflow
parisc: use -fno-strict-aliasing for decompressor
parisc: suppress error messages for 'make clean'
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXtYhfgAKCRCRxhvAZXjc
oghSAP9uVX3vxYtEtNvu9WtEn1uYZcSKZoF1YrcgY7UfSmna0gEAruzyZcai4CJL
WKv+4aRq2oYk+hsqZDycAxIsEgWvNg8=
=ZWj3
-----END PGP SIGNATURE-----
Merge tag 'threads-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread updates from Christian Brauner:
"We have been discussing using pidfds to attach to namespaces for quite
a while and the patches have in one form or another already existed
for about a year. But I wanted to wait to see how the general api
would be received and adopted.
This contains the changes to make it possible to use pidfds to attach
to the namespaces of a process, i.e. they can be passed as the first
argument to the setns() syscall.
When only a single namespace type is specified the semantics are
equivalent to passing an nsfd. That means setns(nsfd, CLONE_NEWNET)
equals setns(pidfd, CLONE_NEWNET).
However, when a pidfd is passed, multiple namespace flags can be
specified in the second setns() argument and setns() will attach the
caller to all the specified namespaces all at once or to none of them.
Specifying 0 is not valid together with a pidfd. Here are just two
obvious examples:
setns(pidfd, CLONE_NEWPID | CLONE_NEWNS | CLONE_NEWNET);
setns(pidfd, CLONE_NEWUSER);
Allowing to also attach subsets of namespaces supports various
use-cases where callers setns to a subset of namespaces to retain
privilege, perform an action and then re-attach another subset of
namespaces.
Apart from significantly reducing the number of syscalls needed to
attach to all currently supported namespaces (eight "open+setns"
sequences vs just a single "setns()"), this also allows atomic setns
to a set of namespaces, i.e. either attaching to all namespaces
succeeds or we fail without having changed anything.
This is centered around a new internal struct nsset which holds all
information necessary for a task to switch to a new set of namespaces
atomically. Fwiw, with this change a pidfd becomes the only token
needed to interact with a container. I'm expecting this to be
picked-up by util-linux for nsenter rather soon.
Associated with this change is a shiny new test-suite dedicated to
setns() (for pidfds and nsfds alike)"
* tag 'threads-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests/pidfd: add pidfd setns tests
nsproxy: attach to namespaces via pidfds
nsproxy: add struct nsset
- Optimize the task wakeup CPU selection logic, to improve scalability and
reduce wakeup latency spikes
- PELT enhancements
- CFS bandwidth handling fixes
- Optimize the wakeup path by remove rq->wake_list and replacing it with ->ttwu_pending
- Optimize IPI cross-calls by making flush_smp_call_function_queue()
process sync callbacks first.
- Misc fixes and enhancements.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=C2OP
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The changes in this cycle are:
- Optimize the task wakeup CPU selection logic, to improve
scalability and reduce wakeup latency spikes
- PELT enhancements
- CFS bandwidth handling fixes
- Optimize the wakeup path by remove rq->wake_list and replacing it
with ->ttwu_pending
- Optimize IPI cross-calls by making flush_smp_call_function_queue()
process sync callbacks first.
- Misc fixes and enhancements"
* tag 'sched-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
irq_work: Define irq_work_single() on !CONFIG_IRQ_WORK too
sched/headers: Split out open-coded prototypes into kernel/sched/smp.h
sched: Replace rq::wake_list
sched: Add rq::ttwu_pending
irq_work, smp: Allow irq_work on call_single_queue
smp: Optimize send_call_function_single_ipi()
smp: Move irq_work_run() out of flush_smp_call_function_queue()
smp: Optimize flush_smp_call_function_queue()
sched: Fix smp_call_function_single_async() usage for ILB
sched/core: Offload wakee task activation if it the wakee is descheduling
sched/core: Optimize ttwu() spinning on p->on_cpu
sched: Defend cfs and rt bandwidth quota against overflow
sched/cpuacct: Fix charge cpuacct.usage_sys
sched/fair: Replace zero-length array with flexible-array
sched/pelt: Sync util/runnable_sum with PELT window when propagating
sched/cpuacct: Use __this_cpu_add() instead of this_cpu_ptr()
sched/fair: Optimize enqueue_task_fair()
sched: Make scheduler_ipi inline
sched: Clean up scheduler_ipi()
sched/core: Simplify sched_init()
...
- Cleanup of the irq_domain API
- Overhaul of the interrupt chip simulator
- The usual pile of new interrupt chip drivers
- Cleanups, improvements and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=Pi5h
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The generic interrupt departement provides:
- Cleanup of the irq_domain API
- Overhaul of the interrupt chip simulator
- The usual pile of new interrupt chip drivers
- Cleanups, improvements and fixes all over the place"
* tag 'irq-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
irqchip: Fix "Loongson HyperTransport Vector support" driver build on all non-MIPS platforms
dt-bindings: interrupt-controller: Add Loongson PCH MSI
irqchip: Add Loongson PCH MSI controller
dt-bindings: interrupt-controller: Add Loongson PCH PIC
irqchip: Add Loongson PCH PIC controller
dt-bindings: interrupt-controller: Add Loongson HTVEC
irqchip: Add Loongson HyperTransport Vector support
genirq: Check irq_data_get_irq_chip() return value before use
irqchip/sifive-plic: Improve boot prints for multiple PLIC instances
irqchip/sifive-plic: Setup cpuhp once after boot CPU handler is present
irqchip/sifive-plic: Set default irq affinity in plic_irqdomain_map()
irqchip/gic-v2, v3: Drop extra IRQ_NOAUTOEN setting for (E)PPIs
irqdomain: Allow software nodes for IRQ domain creation
irqdomain: Get rid of special treatment for ACPI in __irq_domain_add()
irqdomain: Make __irq_domain_add() less OF-dependent
iio: dummy_evgen: Fix use after free on error in iio_dummy_evgen_create()
irqchip/gic-v3-its: Balance initial LPI affinity across CPUs
irqchip/gic-v3-its: Track LPI distribution on a per CPU basis
genirq/irq_sim: Simplify the API
irqdomain: Make irq_domain_reset_irq_data() available to non-hierarchical users
...
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl7VnKEUHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMbHA/+PQmrPdzPvkLAjjf1y3LXvyEIAXIQ
h2r8SxHa7iGyF6vVPz+ya7ux0KAm8wCVdfkokWG5jxjwK7pysS6gx9JzBVK7dbhD
FsKBSoq9+to9fYlaCyX7vn85C7kK5oGrwS/ECos0BHBpij8ukLgvPQu+PDs7d4xW
1X2Nrgqnc7M4L8ayzXTQX0fDWcOkapzaN86+R+Lavb4hO/FownaYbuCFn+1mdzux
ZNBpt3/y1pM6vi5YBkI1rkauBCmkl/YSX/mf/EwDNlQ0XmcadGQ6z7iwjyiE826g
etCHWD3cgQH7Zzz6CxBNX8Xbq0nIQueHHiFYpVyy9lf4xleFvnfFDebrs8Q9TB6G
jTWU8okioUKPZyRDaRuIAmCf/LBQRsMkIYTU3w6J0ZqsBycTw3NXPiQArmlxZESM
HquxWpKoZytRiw581hiSGKNqY+R3FvA+Jroc/7bWfNOE3IdFxegvCsC3giKJf1rY
AlQitehql9a5jp7A57+477WRYOygYRnd+ntMD5KqR90QSIcQXeg0/lFKhco+zc2p
bXbWLE+aaOTGCeC+3Eow3T7FMWmrIn6ccKgM84+WT7YQYtRqUYu3RIZbnlYXN7uH
8xGXT6ccPcEwIjgyF87J0KyGhrbT1N91Jd2jMJkEry9OLAn/yr+pUBQtAa456MMi
JYevS4atZaUqgvw=
=iLfC
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Summary of the significant patches:
- Record information about binds/unbinds to the audit multicast
socket. This helps identify which processes have/had access to the
information in the audit stream.
- Cleanup and add some additional information to the netfilter
configuration events collected by audit.
- Fix some of the audit error handling code so we don't leak network
namespace references"
* tag 'audit-pr-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: add subj creds to NETFILTER_CFG record to
audit: Replace zero-length array with flexible-array
audit: make symbol 'audit_nfcfgs' static
netfilter: add audit table unregister actions
audit: tidy and extend netfilter_cfg x_tables
audit: log audit netlink multicast bind and unbind
audit: fix a net reference leak in audit_list_rules_send()
audit: fix a net reference leak in audit_send_reply()
-----BEGIN PGP SIGNATURE-----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=HYf4
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Core block changes that have been queued up for this release:
- Remove dead blk-throttle and blk-wbt code (Guoqing)
- Include pid in blktrace note traces (Jan)
- Don't spew I/O errors on wouldblock termination (me)
- Zone append addition (Johannes, Keith, Damien)
- IO accounting improvements (Konstantin, Christoph)
- blk-mq hardware map update improvements (Ming)
- Scheduler dispatch improvement (Salman)
- Inline block encryption support (Satya)
- Request map fixes and improvements (Weiping)
- blk-iocost tweaks (Tejun)
- Fix for timeout failing with error injection (Keith)
- Queue re-run fixes (Douglas)
- CPU hotplug improvements (Christoph)
- Queue entry/exit improvements (Christoph)
- Move DMA drain handling to the few drivers that use it (Christoph)
- Partition handling cleanups (Christoph)"
* tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits)
block: mark bio_wouldblock_error() bio with BIO_QUIET
blk-wbt: rename __wbt_update_limits to wbt_update_limits
blk-wbt: remove wbt_update_limits
blk-throttle: remove tg_drain_bios
blk-throttle: remove blk_throtl_drain
null_blk: force complete for timeout request
blk-mq: drain I/O when all CPUs in a hctx are offline
blk-mq: add blk_mq_all_tag_iter
blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx
blk-mq: use BLK_MQ_NO_TAG in more places
blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG
blk-mq: move more request initialization to blk_mq_rq_ctx_init
blk-mq: simplify the blk_mq_get_request calling convention
blk-mq: remove the bio argument to ->prepare_request
nvme: force complete cancelled requests
blk-mq: blk-mq: provide forced completion method
block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds
block: blk-crypto-fallback: remove redundant initialization of variable err
block: reduce part_stat_lock() scope
block: use __this_cpu_add() instead of access by smp_processor_id()
...
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in
the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
* Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
* Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
* Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
* Fix wrong compatible binding in the qcom driver (Ansuel Smith).
* Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
* Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar).
- Update cpuidle core and drivers:
* Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
* Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
* Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver
and remove an unused local MSR definition from it (Jacob Pan,
Sumeet Pawnikar).
- Update devfreq core and drivers:
* Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
* Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
* Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei).
-----BEGIN PGP SIGNATURE-----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=APdj
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the system-wide PM driver flags, make runtime switching
of cpuidle governors easier, improve the user space hibernation
interface code, add intel-speed-select interface documentation, add
more debug messages to the ACPI code handling suspend to idle, update
the cpufreq core and drivers, fix a minor issue in the cpuidle core
and update two cpuidle drivers, improve the PM-runtime framework,
update the Intel RAPL power capping driver, update devfreq core and
drivers, and clean up the cpupower utility.
Specifics:
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in the
struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
- Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
- Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
- Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
- Fix wrong compatible binding in the qcom driver (Ansuel Smith).
- Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
- Add r8a7742 SoC support to the dt cpufreq driver (Lad
Prabhakar).
- Update cpuidle core and drivers:
- Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
- Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
- Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver and
remove an unused local MSR definition from it (Jacob Pan, Sumeet
Pawnikar).
- Update devfreq core and drivers:
- Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
- Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
- Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei)"
* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
cpuidle: Fix three reference count leaks
PM: runtime: Replace pm_runtime_callbacks_present()
PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
PM / devfreq: Replace strncpy with strscpy
PM / devfreq: imx: Register interconnect device
PM / devfreq: Add generic imx bus scaling driver
PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
PM: hibernate: Restrict writes to the resume device
PM: runtime: clk: Fix clk_pm_runtime_get() error path
cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
ACPI: PM: s2idle: Print type of wakeup debug messages
powercap: RAPL: remove unused local MSR define
PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
Documentation: admin-guide: pm: Document intel-speed-select
PM: hibernate: Split off snapshot dev option
PM: hibernate: Incorporate concurrency handling
Documentation: ABI: make current_governer_ro as a candidate for removal
...
Merge updates from Andrew Morton:
"A few little subsystems and a start of a lot of MM patches.
Subsystems affected by this patch series: squashfs, ocfs2, parisc,
vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup,
swap, memcg, pagemap, memory-failure, vmalloc, kasan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
kasan: move kasan_report() into report.c
mm/mm_init.c: report kasan-tag information stored in page->flags
ubsan: entirely disable alignment checks under UBSAN_TRAP
kasan: fix clang compilation warning due to stack protector
x86/mm: remove vmalloc faulting
mm: remove vmalloc_sync_(un)mappings()
x86/mm/32: implement arch_sync_kernel_mappings()
x86/mm/64: implement arch_sync_kernel_mappings()
mm/ioremap: track which page-table levels were modified
mm/vmalloc: track which page-table levels were modified
mm: add functions to track page directory modifications
s390: use __vmalloc_node in stack_alloc
powerpc: use __vmalloc_node in alloc_vm_stack
arm64: use __vmalloc_node in arch_alloc_vmap_stack
mm: remove vmalloc_user_node_flags
mm: switch the test_vmalloc module to use __vmalloc_node
mm: remove __vmalloc_node_flags_caller
mm: remove both instances of __vmalloc_node_flags
mm: remove the prot argument to __vmalloc_node
mm: remove the pgprot argument to __vmalloc
...
These functions are not needed anymore because the vmalloc and ioremap
mappings are now synchronized when they are created or torn down.
Remove all callers and function definitions.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200515140023.25469-7-joro@8bytes.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Open code it in __bpf_map_area_alloc, which is the only caller. Also
clean up __bpf_map_area_alloc to have a single vmalloc call with slightly
different flags instead of the current two different calls.
For this to compile for the nommu case add a __vmalloc_node_range stub to
nommu.c.
[akpm@linux-foundation.org: fix nommu.c build]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200414131348.444715-27-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Just use __vmalloc_node instead which gets and extra argument. To be able
to to use __vmalloc_node in all caller make it available outside of
vmalloc and implement it in nommu.c.
[akpm@linux-foundation.org: fix nommu build]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200414131348.444715-25-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace the open coded instance of vmap with the actual function. In
the non-contiguous (IOMMU) case this requires an extra find_vm_area,
but given that this isn't a fast path function that is a small price
to pay.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-6-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PF_LESS_THROTTLE exists for loop-back nfsd (and a similar need in the
loop block driver and callers of prctl(PR_SET_IO_FLUSHER)), where a
daemon needs to write to one bdi (the final bdi) in order to free up
writes queued to another bdi (the client bdi).
The daemon sets PF_LESS_THROTTLE and gets a larger allowance of dirty
pages, so that it can still dirty pages after other processses have been
throttled. The purpose of this is to avoid deadlock that happen when
the PF_LESS_THROTTLE process must write for any dirty pages to be freed,
but it is being thottled and cannot write.
This approach was designed when all threads were blocked equally,
independently on which device they were writing to, or how fast it was.
Since that time the writeback algorithm has changed substantially with
different threads getting different allowances based on non-trivial
heuristics. This means the simple "add 25%" heuristic is no longer
reliable.
The important issue is not that the daemon needs a *larger* dirty page
allowance, but that it needs a *private* dirty page allowance, so that
dirty pages for the "client" bdi that it is helping to clear (the bdi
for an NFS filesystem or loop block device etc) do not affect the
throttling of the daemon writing to the "final" bdi.
This patch changes the heuristic so that the task is not throttled when
the bdi it is writing to has a dirty page count below below (or equal
to) the free-run threshold for that bdi. This ensures it will always be
able to have some pages in flight, and so will not deadlock.
In a steady-state, it is expected that PF_LOCAL_THROTTLE tasks might
still be throttled by global threshold, but that is acceptable as it is
only the deadlock state that is interesting for this flag.
This approach of "only throttle when target bdi is busy" is consistent
with the other use of PF_LESS_THROTTLE in current_may_throttle(), were
it causes attention to be focussed only on the target bdi.
So this patch
- renames PF_LESS_THROTTLE to PF_LOCAL_THROTTLE,
- removes the 25% bonus that that flag gives, and
- If PF_LOCAL_THROTTLE is set, don't delay at all unless the
global and the local free-run thresholds are exceeded.
Note that previously realtime threads were treated the same as
PF_LESS_THROTTLE threads. This patch does *not* change the behvaiour
for real-time threads, so it is now different from the behaviour of nfsd
and loop tasks. I don't know what is wanted for realtime.
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Chuck Lever <chuck.lever@oracle.com> [nfsd]
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: http://lkml.kernel.org/r/87ftbf7gs3.fsf@notabene.neil.brown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, 'KDBFLAGS' is an internal variable of kdb, it is combined
by 'KDBDEBUG' and state flags. It will be shown only when 'KDBDEBUG'
is set, and the user can define an environment variable named 'KDBFLAGS'
too. These are puzzling indeed.
After communication with Daniel, it seems that 'KDBFLAGS' is a misfeature.
So let's replace 'KDBFLAGS' with 'KDBDEBUG' to just show the value we
wrote into. After this modification, we can use `md4c1 kdb_flags` instead,
to observe the state flags.
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/r/20200521072125.21103-1-liwei391@huawei.com
[daniel.thompson@linaro.org: Make kdb_flags unsigned to avoid arithmetic
right shift]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
From code inspection the math in handle_ctrl_cmd() looks super sketchy
because it subjects -1 from cmdptr and then does a "%
KDB_CMD_HISTORY_COUNT". It turns out that this code works because
"cmdptr" is unsigned and KDB_CMD_HISTORY_COUNT is a nice power of 2.
Let's make this a little less sketchy.
This patch should be a no-op.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200507161125.1.I2cce9ac66e141230c3644b8174b6c15d4e769232@changeid
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
When I combined kgdboc_earlycon with an inflight patch titled ("soc:
qcom-geni-se: Add interconnect support to fix earlycon crash") [1]
things went boom. Specifically I got a crash during the transition
between kgdboc_earlycon and the main kgdboc that looked like this:
Call trace:
__schedule_bug+0x68/0x6c
__schedule+0x75c/0x924
schedule+0x8c/0xbc
schedule_timeout+0x9c/0xfc
do_wait_for_common+0xd0/0x160
wait_for_completion_timeout+0x54/0x74
rpmh_write_batch+0x1fc/0x23c
qcom_icc_bcm_voter_commit+0x1b4/0x388
qcom_icc_set+0x2c/0x3c
apply_constraints+0x5c/0x98
icc_set_bw+0x204/0x3bc
icc_put+0x30/0xf8
geni_remove_earlycon_icc_vote+0x6c/0x9c
qcom_geni_serial_earlycon_exit+0x10/0x1c
kgdboc_earlycon_deinit+0x38/0x58
kgdb_register_io_module+0x11c/0x194
configure_kgdboc+0x108/0x174
kgdboc_probe+0x38/0x60
platform_drv_probe+0x90/0xb0
really_probe+0x130/0x2fc
...
The problem was that we were holding the "kgdb_registration_lock"
while calling into code that didn't expect to be called in spinlock
context.
Let's slightly defer when we call the deinit code so that it's not
done under spinlock.
NOTE: this does mean that the "deinit" call of the old kgdb IO module
is now made _after_ the init of the new IO module, but presumably
that's OK.
[1] https://lkml.kernel.org/r/1588919619-21355-3-git-send-email-akashast@codeaurora.org
Fixes: 220995622d ("kgdboc: Add kgdboc_earlycon to support early kgdb using boot consoles")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200526142001.1.I523dc33f96589cb9956f5679976d402c8cda36fa@changeid
[daniel.thompson@linaro.org: Resolved merge issues by hand]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Some SMP platforms don't have CONFIG_IRQ_WORK defined, resulting in a link
error at build time.
Define a stub and clean up the prototype definitions.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull uaccess/coredump updates from Al Viro:
"set_fs() removal in coredump-related area - mostly Christoph's
stuff..."
* 'work.set_fs-exec' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
binfmt_elf_fdpic: remove the set_fs(KERNEL_DS) in elf_fdpic_core_dump
binfmt_elf: remove the set_fs(KERNEL_DS) in elf_core_dump
binfmt_elf: remove the set_fs in fill_siginfo_note
signal: refactor copy_siginfo_to_user32
powerpc/spufs: simplify spufs core dumping
powerpc/spufs: stop using access_ok
powerpc/spufs: fix copy_to_user while atomic
Pull uaccess/__put-user updates from Al Viro:
"Removal of __put_user() calls - misc patches that don't fit into any
other series"
* 'uaccess.__put_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
pcm_native: result of put_user() needs to be checked
scsi_ioctl.c: switch SCSI_IOCTL_GET_IDLUN to copy_to_user()
compat sysinfo(2): don't bother with field-by-field copyout
Pull uaccess/readdir updates from Al Viro:
"Finishing the conversion of readdir.c to unsafe_... API.
This includes the uaccess_{read,write}_begin series by Christophe
Leroy"
* 'uaccess.readdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
readdir.c: get rid of the last __put_user(), drop now-useless access_ok()
readdir.c: get compat_filldir() more or less in sync with filldir()
switch readdir(2) to unsafe_copy_dirent_name()
drm/i915/gem: Replace user_access_begin by user_write_access_begin
uaccess: Selectively open read or write user access
uaccess: Add user_read_access_begin/end and user_write_access_begin/end
set from Mauro toward the completion of the RST conversion. I *really*
hope we are getting close to the end of this. Meanwhile, those patches
reach pretty far afield to update document references around the tree;
there should be no actual code changes there. There will be, alas, more of
the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots of
fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd
bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7
+NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR
RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm
SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz
oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw=
=fDC/
-----END PGP SIGNATURE-----
Merge tag 'docs-5.8' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
- remove a now unnecessary usage of the KERNEL_DS for
sys_oabi_epoll_ctl()
- update my email address in a number of drivers
- decompressor EFI updates from Ard Biesheuvel
- module unwind section handling updates
- sparsemem Kconfig cleanups
- make act_mm macro respect THREAD_SIZE
-----BEGIN PGP SIGNATURE-----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=vMHE
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- remove a now unnecessary usage of the KERNEL_DS for
sys_oabi_epoll_ctl()
- update my email address in a number of drivers
- decompressor EFI updates from Ard Biesheuvel
- module unwind section handling updates
- sparsemem Kconfig cleanups
- make act_mm macro respect THREAD_SIZE
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8980/1: Allow either FLATMEM or SPARSEMEM on the multiplatform build
ARM: 8979/1: Remove redundant ARCH_SPARSEMEM_DEFAULT setting
ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE
ARM: decompressor: run decompressor in place if loaded via UEFI
ARM: decompressor: move GOT into .data for EFI enabled builds
ARM: decompressor: defer loading of the contents of the LC0 structure
ARM: decompressor: split off _edata and stack base into separate object
ARM: decompressor: move headroom variable out of LC0
ARM: 8976/1: module: allow arch overrides for .init section names
ARM: 8975/1: module: fix handling of unwind init sections
ARM: 8974/1: use SPARSMEM_STATIC when SPARSEMEM is enabled
ARM: 8971/1: replace the sole use of a symbol with its definition
ARM: 8969/1: decompressor: simplify libfdt builds
Update rmk's email address in various drivers
ARM: compat: remove KERNEL_DS usage in sys_oabi_epoll_ctl()
Failure to update a bpf_link because it has been auto-detached by a dying
cgroup currently results in EINVAL error, even though the arguments passed
to bpf() syscall are not wrong.
bpf_links attaching to netns in this case will return ENOLINK, which
carries the message that the link is no longer attached to anything.
Change cgroup bpf_links to do the same to keep the uAPI errors consistent.
Fixes: 0c991ebc8c ("bpf: Implement bpf_prog replacement for an active bpf_cgroup_link")
Suggested-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-6-jakub@cloudflare.com
Extend bpf() syscall subcommands that operate on bpf_link, that is
LINK_CREATE, LINK_UPDATE, OBJ_GET_INFO, to accept attach types tied to
network namespaces (only flow dissector at the moment).
Link-based and prog-based attachment can be used interchangeably, but only
one can exist at a time. Attempts to attach a link when a prog is already
attached directly, and the other way around, will be met with -EEXIST.
Attempts to detach a program when link exists result in -EINVAL.
Attachment of multiple links of same attach type to one netns is not
supported with the intention to lift the restriction when a use-case
presents itself. Because of that link create returns -E2BIG when trying to
create another netns link, when one already exists.
Link-based attachments to netns don't keep a netns alive by holding a ref
to it. Instead links get auto-detached from netns when the latter is being
destroyed, using a pernet pre_exit callback.
When auto-detached, link lives in defunct state as long there are open FDs
for it. -ENOLINK is returned if a user tries to update a defunct link.
Because bpf_link to netns doesn't hold a ref to struct net, special care is
taken when releasing, updating, or filling link info. The netns might be
getting torn down when any of these link operations are in progress. That
is why auto-detach and update/release/fill_info are synchronized by the
same mutex. Also, link ops have to always check if auto-detach has not
happened yet and if netns is still alive (refcnt > 0).
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-5-jakub@cloudflare.com
Move functions to manage BPF programs attached to netns that are not
specific to flow dissector to a dedicated module named
bpf/net_namespace.c.
The set of functions will grow with the addition of bpf_link support for
netns attached programs. This patch prepares ground by creating a place
for it.
This is a code move with no functional changes intended.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-4-jakub@cloudflare.com
In order to:
(1) attach more than one BPF program type to netns, or
(2) support attaching BPF programs to netns with bpf_link, or
(3) support multi-prog attach points for netns
we will need to keep more state per netns than a single pointer like we
have now for BPF flow dissector program.
Prepare for the above by extracting netns_bpf that is part of struct net,
for storing all state related to BPF programs attached to netns.
Turn flow dissector callbacks for querying/attaching/detaching a program
into generic ones that operate on netns_bpf. Next patch will move the
generic callbacks into their own module.
This is similar to how it is organized for cgroup with cgroup_bpf.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-3-jakub@cloudflare.com
- Branch Target Identification (BTI)
* Support for ARMv8.5-BTI in both user- and kernel-space. This
allows branch targets to limit the types of branch from which
they can be called and additionally prevents branching to
arbitrary code, although kernel support requires a very recent
toolchain.
* Function annotation via SYM_FUNC_START() so that assembly
functions are wrapped with the relevant "landing pad"
instructions.
* BPF and vDSO updates to use the new instructions.
* Addition of a new HWCAP and exposure of BTI capability to
userspace via ID register emulation, along with ELF loader
support for the BTI feature in .note.gnu.property.
* Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
- Shadow Call Stack (SCS)
* Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each
task that holds only return addresses. This protects function
return control flow from buffer overruns on the main stack.
* Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
* Core support for SCS, should other architectures want to use it
too.
* SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
- CPU feature detection
* Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a
concern for KVM, which disabled support for 32-bit guests on
such a system.
* Addition of new ID registers and fields as the architecture has
been extended.
- Perf and PMU drivers
* Minor fixes and cleanups to system PMU drivers.
- Hardware errata
* Unify KVM workarounds for VHE and nVHE configurations.
* Sort vendor errata entries in Kconfig.
- Secure Monitor Call Calling Convention (SMCCC)
* Update to the latest specification from Arm (v1.2).
* Allow PSCI code to query the SMCCC version.
- Software Delegated Exception Interface (SDEI)
* Unexport a bunch of unused symbols.
* Minor fixes to handling of firmware data.
- Pointer authentication
* Add support for dumping the kernel PAC mask in vmcoreinfo so
that the stack can be unwound by tools such as kdump.
* Simplification of key initialisation during CPU bringup.
- BPF backend
* Improve immediate generation for logical and add/sub
instructions.
- vDSO
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
- ACPI
- Work around for an ambiguity in the IORT specification relating
to the "num_ids" field.
- Support _DMA method for all named components rather than only
PCIe root complexes.
- Minor other IORT-related fixes.
- Miscellaneous
* Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
* Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
* Refactoring and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl7U9csQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLBHCACs/YU4SM7Om5f+7QnxIKao5DBr2CnGGvdC
yTfDghFDTLQVv3MufLlfno3yBe5G8sQpcZfcc+hewfcGoMzVZXu8s7LzH6VSn9T9
jmT3KjDMrg0RjSHzyumJp2McyelTk0a4FiKArSIIKsJSXUyb1uPSgm7SvKVDwEwU
JGDzL9IGilmq59GiXfDzGhTZgmC37QdwRoRxDuqtqWQe5CHoRXYexg87HwBKOQxx
HgU9L7ehri4MRZfpyjaDrr6quJo3TVnAAKXNBh3mZAskVS9ZrfKpEH0kYWYuqybv
znKyHRecl/rrGePV8RTMtrwnSdU26zMXE/omsVVauDfG9hqzqm+Q
=w3qi
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A sizeable pile of arm64 updates for 5.8.
Summary below, but the big two features are support for Branch Target
Identification and Clang's Shadow Call stack. The latter is currently
arm64-only, but the high-level parts are all in core code so it could
easily be adopted by other architectures pending toolchain support
Branch Target Identification (BTI):
- Support for ARMv8.5-BTI in both user- and kernel-space. This allows
branch targets to limit the types of branch from which they can be
called and additionally prevents branching to arbitrary code,
although kernel support requires a very recent toolchain.
- Function annotation via SYM_FUNC_START() so that assembly functions
are wrapped with the relevant "landing pad" instructions.
- BPF and vDSO updates to use the new instructions.
- Addition of a new HWCAP and exposure of BTI capability to userspace
via ID register emulation, along with ELF loader support for the
BTI feature in .note.gnu.property.
- Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
Shadow Call Stack (SCS):
- Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each task
that holds only return addresses. This protects function return
control flow from buffer overruns on the main stack.
- Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
- Core support for SCS, should other architectures want to use it
too.
- SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
CPU feature detection:
- Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a concern
for KVM, which disabled support for 32-bit guests on such a system.
- Addition of new ID registers and fields as the architecture has
been extended.
Perf and PMU drivers:
- Minor fixes and cleanups to system PMU drivers.
Hardware errata:
- Unify KVM workarounds for VHE and nVHE configurations.
- Sort vendor errata entries in Kconfig.
Secure Monitor Call Calling Convention (SMCCC):
- Update to the latest specification from Arm (v1.2).
- Allow PSCI code to query the SMCCC version.
Software Delegated Exception Interface (SDEI):
- Unexport a bunch of unused symbols.
- Minor fixes to handling of firmware data.
Pointer authentication:
- Add support for dumping the kernel PAC mask in vmcoreinfo so that
the stack can be unwound by tools such as kdump.
- Simplification of key initialisation during CPU bringup.
BPF backend:
- Improve immediate generation for logical and add/sub instructions.
vDSO:
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
ACPI:
- Work around for an ambiguity in the IORT specification relating to
the "num_ids" field.
- Support _DMA method for all named components rather than only PCIe
root complexes.
- Minor other IORT-related fixes.
Miscellaneous:
- Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
- Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
ACPI/IORT: Remove the unused __get_pci_rid()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64: mm: Add asid_gen_match() helper
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
...
Currenty lsm uses bpf_tracing_func_proto helpers which do
not include stack trace or perf event output. It's useful
to have those for bpftrace lsm support [1].
Using tracing_prog_func_proto helpers for lsm programs.
[1] https://github.com/iovisor/bpftrace/pull/1347
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200531154255.896551-1-jolsa@kernel.org
In order to use standard 'xdp' prefix, rename convert_to_xdp_frame
utility routine in xdp_convert_buff_to_frame and replace all the
occurrences
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/6344f739be0d1a08ab2b9607584c4d5478c8c083.1590698295.git.lorenzo@kernel.org
buf_prevkey in generic_map_lookup_batch() is allocated with
kmalloc(). It's safe to free it with kfree().
Fixes: cb4d03ab49 ("bpf: Add generic support for lookup batch op")
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200601162814.17426-1-efremov@linux.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add xdp_txq_info as the Tx counterpart to xdp_rxq_info. At the
moment only the device is added. Other fields (queue_index)
can be added as use cases arise.
>From a UAPI perspective, add egress_ifindex to xdp context for
bpf programs to see the Tx device.
Update the verifier to only allow accesses to egress_ifindex by
XDP programs with BPF_XDP_DEVMAP expected attach type.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200529220716.75383-4-dsahern@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add BPF_XDP_DEVMAP attach type for use with programs associated with a
DEVMAP entry.
Allow DEVMAPs to associate a program with a device entry by adding
a bpf_prog.fd to 'struct bpf_devmap_val'. Values read show the program
id, so the fd and id are a union. bpf programs can get access to the
struct via vmlinux.h.
The program associated with the fd must have type XDP with expected
attach type BPF_XDP_DEVMAP. When a program is associated with a device
index, the program is run on an XDP_REDIRECT and before the buffer is
added to the per-cpu queue. At this point rxq data is still valid; the
next patch adds tx device information allowing the prorgam to see both
ingress and egress device indices.
XDP generic is skb based and XDP programs do not work with skb's. Block
the use case by walking maps used by a program that is to be attached
via xdpgeneric and fail if any of them are DEVMAP / DEVMAP_HASH with
Block attach of BPF_XDP_DEVMAP programs to devices.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200529220716.75383-3-dsahern@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add 'struct bpf_devmap_val' to formalize the expected values that can
be passed in for a DEVMAP. Update devmap code to use the struct.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200529220716.75383-2-dsahern@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In bpf_seq_printf() helper, when user specified a "%s" in the
format string, strncpy_from_unsafe() is used to read the actual string
to a buffer. The string could be a format string or a string in
the kernel data structure. It is really unlikely that the string
will reside in the user memory.
This is different from Commit b2a5212fb6 ("bpf: Restrict bpf_trace_printk()'s %s
usage and add %pks, %pus specifier") which still used
strncpy_from_unsafe() for "%s" to preserve the old behavior.
If in the future, bpf_seq_printf() indeed needs to read user
memory, we can implement "%pus" format string.
Based on discussion in [1], if the intent is to read kernel memory,
strncpy_from_unsafe_strict() should be used. So this patch
changed to use strncpy_from_unsafe_strict().
[1]: https://lore.kernel.org/bpf/20200521152301.2587579-1-hch@lst.de/T/
Fixes: 492e639f0c ("bpf: Add bpf_seq_printf and bpf_seq_write helpers")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/bpf/20200529004810.3352219-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds a new MPSC ring buffer implementation into BPF ecosystem,
which allows multiple CPUs to submit data to a single shared ring buffer. On
the consumption side, only single consumer is assumed.
Motivation
----------
There are two distinctive motivators for this work, which are not satisfied by
existing perf buffer, which prompted creation of a new ring buffer
implementation.
- more efficient memory utilization by sharing ring buffer across CPUs;
- preserving ordering of events that happen sequentially in time, even
across multiple CPUs (e.g., fork/exec/exit events for a task).
These two problems are independent, but perf buffer fails to satisfy both.
Both are a result of a choice to have per-CPU perf ring buffer. Both can be
also solved by having an MPSC implementation of ring buffer. The ordering
problem could technically be solved for perf buffer with some in-kernel
counting, but given the first one requires an MPSC buffer, the same solution
would solve the second problem automatically.
Semantics and APIs
------------------
Single ring buffer is presented to BPF programs as an instance of BPF map of
type BPF_MAP_TYPE_RINGBUF. Two other alternatives considered, but ultimately
rejected.
One way would be to, similar to BPF_MAP_TYPE_PERF_EVENT_ARRAY, make
BPF_MAP_TYPE_RINGBUF could represent an array of ring buffers, but not enforce
"same CPU only" rule. This would be more familiar interface compatible with
existing perf buffer use in BPF, but would fail if application needed more
advanced logic to lookup ring buffer by arbitrary key. HASH_OF_MAPS addresses
this with current approach. Additionally, given the performance of BPF
ringbuf, many use cases would just opt into a simple single ring buffer shared
among all CPUs, for which current approach would be an overkill.
Another approach could introduce a new concept, alongside BPF map, to
represent generic "container" object, which doesn't necessarily have key/value
interface with lookup/update/delete operations. This approach would add a lot
of extra infrastructure that has to be built for observability and verifier
support. It would also add another concept that BPF developers would have to
familiarize themselves with, new syntax in libbpf, etc. But then would really
provide no additional benefits over the approach of using a map.
BPF_MAP_TYPE_RINGBUF doesn't support lookup/update/delete operations, but so
doesn't few other map types (e.g., queue and stack; array doesn't support
delete, etc).
The approach chosen has an advantage of re-using existing BPF map
infrastructure (introspection APIs in kernel, libbpf support, etc), being
familiar concept (no need to teach users a new type of object in BPF program),
and utilizing existing tooling (bpftool). For common scenario of using
a single ring buffer for all CPUs, it's as simple and straightforward, as
would be with a dedicated "container" object. On the other hand, by being
a map, it can be combined with ARRAY_OF_MAPS and HASH_OF_MAPS map-in-maps to
implement a wide variety of topologies, from one ring buffer for each CPU
(e.g., as a replacement for perf buffer use cases), to a complicated
application hashing/sharding of ring buffers (e.g., having a small pool of
ring buffers with hashed task's tgid being a look up key to preserve order,
but reduce contention).
Key and value sizes are enforced to be zero. max_entries is used to specify
the size of ring buffer and has to be a power of 2 value.
There are a bunch of similarities between perf buffer
(BPF_MAP_TYPE_PERF_EVENT_ARRAY) and new BPF ring buffer semantics:
- variable-length records;
- if there is no more space left in ring buffer, reservation fails, no
blocking;
- memory-mappable data area for user-space applications for ease of
consumption and high performance;
- epoll notifications for new incoming data;
- but still the ability to do busy polling for new data to achieve the
lowest latency, if necessary.
BPF ringbuf provides two sets of APIs to BPF programs:
- bpf_ringbuf_output() allows to *copy* data from one place to a ring
buffer, similarly to bpf_perf_event_output();
- bpf_ringbuf_reserve()/bpf_ringbuf_commit()/bpf_ringbuf_discard() APIs
split the whole process into two steps. First, a fixed amount of space is
reserved. If successful, a pointer to a data inside ring buffer data area
is returned, which BPF programs can use similarly to a data inside
array/hash maps. Once ready, this piece of memory is either committed or
discarded. Discard is similar to commit, but makes consumer ignore the
record.
bpf_ringbuf_output() has disadvantage of incurring extra memory copy, because
record has to be prepared in some other place first. But it allows to submit
records of the length that's not known to verifier beforehand. It also closely
matches bpf_perf_event_output(), so will simplify migration significantly.
bpf_ringbuf_reserve() avoids the extra copy of memory by providing a memory
pointer directly to ring buffer memory. In a lot of cases records are larger
than BPF stack space allows, so many programs have use extra per-CPU array as
a temporary heap for preparing sample. bpf_ringbuf_reserve() avoid this needs
completely. But in exchange, it only allows a known constant size of memory to
be reserved, such that verifier can verify that BPF program can't access
memory outside its reserved record space. bpf_ringbuf_output(), while slightly
slower due to extra memory copy, covers some use cases that are not suitable
for bpf_ringbuf_reserve().
The difference between commit and discard is very small. Discard just marks
a record as discarded, and such records are supposed to be ignored by consumer
code. Discard is useful for some advanced use-cases, such as ensuring
all-or-nothing multi-record submission, or emulating temporary malloc()/free()
within single BPF program invocation.
Each reserved record is tracked by verifier through existing
reference-tracking logic, similar to socket ref-tracking. It is thus
impossible to reserve a record, but forget to submit (or discard) it.
bpf_ringbuf_query() helper allows to query various properties of ring buffer.
Currently 4 are supported:
- BPF_RB_AVAIL_DATA returns amount of unconsumed data in ring buffer;
- BPF_RB_RING_SIZE returns the size of ring buffer;
- BPF_RB_CONS_POS/BPF_RB_PROD_POS returns current logical possition of
consumer/producer, respectively.
Returned values are momentarily snapshots of ring buffer state and could be
off by the time helper returns, so this should be used only for
debugging/reporting reasons or for implementing various heuristics, that take
into account highly-changeable nature of some of those characteristics.
One such heuristic might involve more fine-grained control over poll/epoll
notifications about new data availability in ring buffer. Together with
BPF_RB_NO_WAKEUP/BPF_RB_FORCE_WAKEUP flags for output/commit/discard helpers,
it allows BPF program a high degree of control and, e.g., more efficient
batched notifications. Default self-balancing strategy, though, should be
adequate for most applications and will work reliable and efficiently already.
Design and implementation
-------------------------
This reserve/commit schema allows a natural way for multiple producers, either
on different CPUs or even on the same CPU/in the same BPF program, to reserve
independent records and work with them without blocking other producers. This
means that if BPF program was interruped by another BPF program sharing the
same ring buffer, they will both get a record reserved (provided there is
enough space left) and can work with it and submit it independently. This
applies to NMI context as well, except that due to using a spinlock during
reservation, in NMI context, bpf_ringbuf_reserve() might fail to get a lock,
in which case reservation will fail even if ring buffer is not full.
The ring buffer itself internally is implemented as a power-of-2 sized
circular buffer, with two logical and ever-increasing counters (which might
wrap around on 32-bit architectures, that's not a problem):
- consumer counter shows up to which logical position consumer consumed the
data;
- producer counter denotes amount of data reserved by all producers.
Each time a record is reserved, producer that "owns" the record will
successfully advance producer counter. At that point, data is still not yet
ready to be consumed, though. Each record has 8 byte header, which contains
the length of reserved record, as well as two extra bits: busy bit to denote
that record is still being worked on, and discard bit, which might be set at
commit time if record is discarded. In the latter case, consumer is supposed
to skip the record and move on to the next one. Record header also encodes
record's relative offset from the beginning of ring buffer data area (in
pages). This allows bpf_ringbuf_commit()/bpf_ringbuf_discard() to accept only
the pointer to the record itself, without requiring also the pointer to ring
buffer itself. Ring buffer memory location will be restored from record
metadata header. This significantly simplifies verifier, as well as improving
API usability.
Producer counter increments are serialized under spinlock, so there is
a strict ordering between reservations. Commits, on the other hand, are
completely lockless and independent. All records become available to consumer
in the order of reservations, but only after all previous records where
already committed. It is thus possible for slow producers to temporarily hold
off submitted records, that were reserved later.
Reservation/commit/consumer protocol is verified by litmus tests in
Documentation/litmus-test/bpf-rb.
One interesting implementation bit, that significantly simplifies (and thus
speeds up as well) implementation of both producers and consumers is how data
area is mapped twice contiguously back-to-back in the virtual memory. This
allows to not take any special measures for samples that have to wrap around
at the end of the circular buffer data area, because the next page after the
last data page would be first data page again, and thus the sample will still
appear completely contiguous in virtual memory. See comment and a simple ASCII
diagram showing this visually in bpf_ringbuf_area_alloc().
Another feature that distinguishes BPF ringbuf from perf ring buffer is
a self-pacing notifications of new data being availability.
bpf_ringbuf_commit() implementation will send a notification of new record
being available after commit only if consumer has already caught up right up
to the record being committed. If not, consumer still has to catch up and thus
will see new data anyways without needing an extra poll notification.
Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c) show that
this allows to achieve a very high throughput without having to resort to
tricks like "notify only every Nth sample", which are necessary with perf
buffer. For extreme cases, when BPF program wants more manual control of
notifications, commit/discard/output helpers accept BPF_RB_NO_WAKEUP and
BPF_RB_FORCE_WAKEUP flags, which give full control over notifications of data
availability, but require extra caution and diligence in using this API.
Comparison to alternatives
--------------------------
Before considering implementing BPF ring buffer from scratch existing
alternatives in kernel were evaluated, but didn't seem to meet the needs. They
largely fell into few categores:
- per-CPU buffers (perf, ftrace, etc), which don't satisfy two motivations
outlined above (ordering and memory consumption);
- linked list-based implementations; while some were multi-producer designs,
consuming these from user-space would be very complicated and most
probably not performant; memory-mapping contiguous piece of memory is
simpler and more performant for user-space consumers;
- io_uring is SPSC, but also requires fixed-sized elements. Naively turning
SPSC queue into MPSC w/ lock would have subpar performance compared to
locked reserve + lockless commit, as with BPF ring buffer. Fixed sized
elements would be too limiting for BPF programs, given existing BPF
programs heavily rely on variable-sized perf buffer already;
- specialized implementations (like a new printk ring buffer, [0]) with lots
of printk-specific limitations and implications, that didn't seem to fit
well for intended use with BPF programs.
[0] https://lwn.net/Articles/779550/
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-2-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The map_lookup_and_delete_elem() function should check for both FMODE_CAN_WRITE
and FMODE_CAN_READ permissions because it returns a map element to user space.
Fixes: bd513cd08f ("bpf: add MAP_LOOKUP_AND_DELETE_ELEM syscall")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200527185700.14658-5-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Often it is useful when applying policy to know something about the
task. If the administrator has CAP_SYS_ADMIN rights then they can
use kprobe + networking hook and link the two programs together to
accomplish this. However, this is a bit clunky and also means we have
to call both the network program and kprobe program when we could just
use a single program and avoid passing metadata through sk_msg/skb->cb,
socket, maps, etc.
To accomplish this add probe_* helpers to bpf_base_func_proto programs
guarded by a perfmon_capable() check. New supported helpers are the
following,
BPF_FUNC_get_current_task
BPF_FUNC_probe_read_user
BPF_FUNC_probe_read_kernel
BPF_FUNC_probe_read_user_str
BPF_FUNC_probe_read_kernel_str
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/159033905529.12355.4368381069655254932.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
System calls encode returned errors as negative values. Fix a typo that
breaks this convention for bpf(LINK_UPDATE) when bpf_link doesn't support
update operation.
Fixes: f9d041271c ("bpf: Refactor bpf_link update handling")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200525122928.1164495-1-jakub@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0ZQd
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups, with an emphasis on removing obsolete/dead code"
* tag 'x86-cleanups-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/spinlock: Remove obsolete ticket spinlock macros and types
x86/mm: Drop deprecated DISCONTIGMEM support for 32-bit
x86/apb_timer: Drop unused declaration and macro
x86/apb_timer: Drop unused TSC calibration
x86/io_apic: Remove unused function mp_init_irq_at_boot()
x86/mm: Stop printing BRK addresses
x86/audit: Fix a -Wmissing-prototypes warning for ia32_classify_syscall()
x86/nmi: Remove edac.h include leftover
mm: Remove MPX leftovers
x86/mm/mmap: Fix -Wmissing-prototypes warnings
x86/early_printk: Remove unused includes
crash_dump: Remove no longer used saved_max_pfn
x86/smpboot: Remove the last ICPU() macro
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
perf record:
- Introduce --switch-output-event to use arbitrary events to be setup
and read from a side band thread and, when they take place a signal
be sent to the main 'perf record' thread, reusing the --switch-output
code to take perf.data snapshots from the --overwrite ring buffer, e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
- Add --num-synthesize-threads option to control degree of parallelism of the
synthesize_mmap() code which is scanning /proc/PID/task/PID/maps and can be
time consuming. This mimics pre-existing behaviour in 'perf top'.
perf bench:
- Add a multi-threaded synthesize benchmark.
- Add kallsyms parsing benchmark.
Intel PT support:
- Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
- Allow using Intel PT to synthesize callchains for regular events.
- Add support for synthesizing branch stacks for regular events (cycles,
instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=i27M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
- perf record:
Introduce '--switch-output-event' to use arbitrary events to be
setup and read from a side band thread and, when they take place a
signal be sent to the main 'perf record' thread, reusing the core
for '--switch-output' to take perf.data snapshots from the ring
buffer used for '--overwrite', e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
Add '--num-synthesize-threads' option to control degree of
parallelism of the synthesize_mmap() code which is scanning
/proc/PID/task/PID/maps and can be time consuming. This mimics
pre-existing behaviour in 'perf top'.
- perf bench:
Add a multi-threaded synthesize benchmark and kallsyms parsing
benchmark.
- Intel PT support:
Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
Allow using Intel PT to synthesize callchains for regular events.
Add support for synthesizing branch stacks for regular events
(cycles, instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details
Also, since over the last couple of years perf tooling has matured and
decoupled from the kernel perf changes to a large degree, going
forward Arnaldo is going to send perf tooling changes via direct pull
requests"
* tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (163 commits)
perf/x86/rapl: Add AMD Fam17h RAPL support
perf/x86/rapl: Make perf_probe_msr() more robust and flexible
perf/x86/rapl: Flip logic on default events visibility
perf/x86/rapl: Refactor to share the RAPL code between Intel and AMD CPUs
perf/x86/rapl: Move RAPL support to common x86 code
perf/core: Replace zero-length array with flexible-array
perf/x86: Replace zero-length array with flexible-array
perf/x86/intel: Add more available bits for OFFCORE_RESPONSE of Intel Tremont
perf/x86/rapl: Add Ice Lake RAPL support
perf flamegraph: Use /bin/bash for report and record scripts
perf cs-etm: Move definition of 'traceid_list' global variable from header file
libsymbols kallsyms: Move hex2u64 out of header
libsymbols kallsyms: Parse using io api
perf bench: Add kallsyms parsing
perf: cs-etm: Update to build with latest opencsd version.
perf symbol: Fix kernel symbol address display
perf inject: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf annotate: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf trace: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf script: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
...
of local_lock_t - this primitive comes from the -rt project and identifies
CPU-local locking dependencies normally handled opaquely beind preempt_disable()
or local_irq_save/disable() critical sections.
The generated code on mainline kernels doesn't change as a result, but still there
are benefits: improved debugging and better documentation of data structure
accesses.
The new local_lock_t primitives are introduced and then utilized in a couple of
kernel subsystems. No change in functionality is intended.
There's also other smaller changes and cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TBTY
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The biggest change to core locking facilities in this cycle is the
introduction of local_lock_t - this primitive comes from the -rt
project and identifies CPU-local locking dependencies normally handled
opaquely beind preempt_disable() or local_irq_save/disable() critical
sections.
The generated code on mainline kernels doesn't change as a result, but
still there are benefits: improved debugging and better documentation
of data structure accesses.
The new local_lock_t primitives are introduced and then utilized in a
couple of kernel subsystems. No change in functionality is intended.
There's also other smaller changes and cleanups"
* tag 'locking-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
zram: Use local lock to protect per-CPU data
zram: Allocate struct zcomp_strm as per-CPU memory
connector/cn_proc: Protect send_msg() with a local lock
squashfs: Make use of local lock in multi_cpu decompressor
mm/swap: Use local_lock for protection
radix-tree: Use local_lock for protection
locking: Introduce local_lock()
locking/lockdep: Replace zero-length array with flexible-array
locking/rtmutex: Remove unused rt_mutex_cmpxchg_relaxed()
- RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Yisx
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The RCU updates for this cycle were:
- RCU-tasks update, including addition of RCU Tasks Trace for BPF use
and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates"
* tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
rcu: Allow for smp_call_function() running callbacks from idle
rcu: Provide rcu_irq_exit_check_preempt()
rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()
rcu: Provide __rcu_is_watching()
rcu: Provide rcu_irq_exit_preempt()
rcu: Make RCU IRQ enter/exit functions rely on in_nmi()
rcu/tree: Mark the idle relevant functions noinstr
x86: Replace ist_enter() with nmi_enter()
x86/mce: Send #MC singal from task work
x86/entry: Get rid of ist_begin/end_non_atomic()
sched,rcu,tracing: Avoid tracing before in_nmi() is correct
sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception
lockdep: Always inline lockdep_{off,on}()
hardirq/nmi: Allow nested nmi_enter()
arm64: Prepare arch_nmi_enter() for recursion
printk: Disallow instrumenting print_nmi_enter()
printk: Prepare for nested printk_nmi_enter()
rcutorture: Convert ULONG_CMP_LT() to time_before()
torture: Add a --kasan argument
torture: Save a few lines by using config_override_param initially
...
logic, instead of the current per debug facility blacklist, use the more generic
.noinstr.text approach, combined with a 'noinstr' marker for functions.
Also add instrumentation_begin()/end() to better manage the exact place in entry
code where instrumentation may be used.
Also add a kprobes blacklist for modules.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=25Vr
-----END PGP SIGNATURE-----
Merge tag 'core-kprobes-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kprobes updates from Ingo Molnar:
"Various kprobes updates, mostly centered around cleaning up the
no-instrumentation logic.
Instead of the current per debug facility blacklist, use the more
generic .noinstr.text approach, combined with a 'noinstr' marker for
functions.
Also add instrumentation_begin()/end() to better manage the exact
place in entry code where instrumentation may be used.
And add a kprobes blacklist for modules"
* tag 'core-kprobes-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes: Prevent probes in .noinstr.text section
vmlinux.lds.h: Create section for protection against instrumentation
samples/kprobes: Add __kprobes and NOKPROBE_SYMBOL() for handlers.
kprobes: Support NOKPROBE_SYMBOL() in modules
kprobes: Support __kprobes blacklist in modules
kprobes: Lock kprobe_mutex while showing kprobe_blacklist
-----BEGIN PGP SIGNATURE-----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=pUBG
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Benjamin Herrenschmidt solved a problem with non-matched console
aliases by first checking consoles defined on the command line. It is
a more conservative approach than the previous attempts.
- Benjamin also made sure that the console accessible via /dev/console
always has CON_CONSDEV flag.
- Andy Shevchenko added the %ptT modifier for printing struct time64_t.
It extends the existing %ptR handling for struct rtc_time.
- Bruno Meneguele fixed /dev/kmsg error value returned by unsupported
SEEK_CUR.
- Tetsuo Handa removed unused pr_cont_once().
... and a few small fixes.
* tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove pr_cont_once()
printk: handle blank console arguments passed in.
kernel/printk: add kmsg SEEK_CUR handling
printk: Fix a typo in comment "interator"->"iterator"
usb: pulse8-cec: Switch to use %ptT
ARM: bcm2835: Switch to use %ptT
lib/vsprintf: Print time64_t in human readable format
lib/vsprintf: update comment about simple_strto<foo>() functions
printk: Correctly set CON_CONSDEV even when preferred console was not registered
printk: Fix preferred console selection with multiple matches
printk: Move console matching logic into a separate function
printk: Convert a use of sprintf to snprintf in console_unlock
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage (WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)
-----BEGIN PGP SIGNATURE-----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=7s1u
-----END PGP SIGNATURE-----
Merge tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"Fixes and new features for pstore.
This is a pretty big set of changes (relative to past pstore pulls),
but it has been in -next for a while. The biggest change here is the
ability to support a block device as a pstore backend, which has been
desired for a while. A lot of additional fixes and refactorings are
also included, mostly in support of the new features.
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees
Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage
(WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)"
* tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits)
mtd: Support kmsg dumper based on pstore/blk
pstore/blk: Introduce "best_effort" mode
pstore/blk: Support non-block storage devices
pstore/blk: Provide way to query pstore configuration
pstore/zone: Provide way to skip "broken" zone for MTD devices
Documentation: Add details for pstore/blk
pstore/zone,blk: Add ftrace frontend support
pstore/zone,blk: Add console frontend support
pstore/zone,blk: Add support for pmsg frontend
pstore/blk: Introduce backend for block devices
pstore/zone: Introduce common layer to manage storage zones
ramoops: Add "max-reason" optional field to ramoops DT node
pstore/ram: Introduce max_reason and convert dump_oops
pstore/platform: Pass max_reason to kmesg dump
printk: Introduce kmsg_dump_reason_str()
printk: honor the max_reason field in kmsg_dumper
printk: Collapse shutdown types into a single dump reason
pstore/ftrace: Provide ftrace log merging routine
pstore/ram: Refactor ftrace buffer merging
pstore/ram: Refactor DT size parsing
...
Pull crypto updates from Herbert Xu:
"API:
- Introduce crypto_shash_tfm_digest() and use it wherever possible.
- Fix use-after-free and race in crypto_spawn_alg.
- Add support for parallel and batch requests to crypto_engine.
Algorithms:
- Update jitter RNG for SP800-90B compliance.
- Always use jitter RNG as seed in drbg.
Drivers:
- Add Arm CryptoCell driver cctrng.
- Add support for SEV-ES to the PSP driver in ccp"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits)
crypto: hisilicon - fix driver compatibility issue with different versions of devices
crypto: engine - do not requeue in case of fatal error
crypto: cavium/nitrox - Fix a typo in a comment
crypto: hisilicon/qm - change debugfs file name from qm_regs to regs
crypto: hisilicon/qm - add DebugFS for xQC and xQE dump
crypto: hisilicon/zip - add debugfs for Hisilicon ZIP
crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE
crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC
crypto: hisilicon/qm - add debugfs to the QM state machine
crypto: hisilicon/qm - add debugfs for QM
crypto: stm32/crc32 - protect from concurrent accesses
crypto: stm32/crc32 - don't sleep in runtime pm
crypto: stm32/crc32 - fix multi-instance
crypto: stm32/crc32 - fix run-time self test issue.
crypto: stm32/crc32 - fix ext4 chksum BUG_ON()
crypto: hisilicon/zip - Use temporary sqe when doing work
crypto: hisilicon - add device error report through abnormal irq
crypto: hisilicon - remove codes of directly report device errors through MSI
crypto: hisilicon - QM memory management optimization
crypto: hisilicon - unify initial value assignment into QM
...
Any runtime WARN_ON() has to be fixed, and BUILD_BUG_ON() can
help you nitice it earlier.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When "traceoff_on_warning" is enabled and a warning happens, there can still
be many trace events happening on other CPUs between the time the warning
occurred and the last trace event on that same CPU. This can cause confusion
in examining the trace, as it may not be obvious where the warning happened.
By adding a trace print into the trace just before disabling tracing, it
makes it obvious where the warning occurred, and the developer doesn't have
to look at other means to see what CPU it occurred on.
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With the addition of the in-kernel synthetic event API, synthetic
events are no longer specifically tied to the histogram triggers.
The synthetic event code is also making trace_event_hist.c very
bloated, so for those reasons, move it to a separate file,
trace_events_synth.c, along with a new trace_synth.h header file.
Because synthetic events are now independent from hist triggers, add a
new CONFIG_SYNTH_EVENTS config option, and have CONFIG_HIST_TRIGGERS
select it, and have CONFIG_SYNTH_EVENT_GEN_TEST depend on it.
Link: http://lkml.kernel.org/r/4d1fa1f85ed5982706ac44844ac92451dcb04715.1590693308.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a new "hist_debug" file for each trace event, which when read will
dump out a bunch of internal details about the hist triggers defined
on that event.
This is normally off but can be enabled by saying 'y' to the new
CONFIG_HIST_TRIGGERS_DEBUG config option.
This is in support of the new Documentation file describing histogram
internals, Documentation/trace/histogram-design.rst, which was
requested by developers trying to understand the internals when
extending or making use of the hist triggers for higher-level tools.
The histogram-design.rst documentation refers to the hist_debug files
and demonstrates their use with output in the test examples.
Link: http://lkml.kernel.org/r/77914c22b0ba493d9783c53bbfbc6087d6a7e1b1.1585941485.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since trace_state.disabled is set in __synth_event_trace_start() at
the same time -ENOENT is returned, don't bother returning -ENOENT -
just have callers check trace_state.disabled instead, and avoid the
extra return val munging.
Link: http://lkml.kernel.org/r/87315c3889af870e8370e82b76cf48b426d70130.1585941485.git.zanussi@kernel.org
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@godmis.org>
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
current->mm check is not reliable as the mm might be temporary
due to use_mm() in a kthread. Check for PF_KTHREAD explictely.
-----BEGIN PGP SIGNATURE-----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=GfbN
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix preventing a crash in NUMA balancing.
The current->mm check is not reliable as the mm might be temporary due
to use_mm() in a kthread. Check for PF_KTHREAD explictly"
* tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Don't NUMA balance for kthreads
Pull networking fixes from David Miller:
"Another week, another set of bug fixes:
1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long.
2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin
Long.
3) Re-arm discovery timer properly in mac80211 mesh code, from Linus
Lüssing.
4) Prevent buffer overflows in nf_conntrack_pptp debug code, from
Pablo Neira Ayuso.
5) Fix race in ktls code between tls_sw_recvmsg() and
tls_decrypt_done(), from Vinay Kumar Yadav.
6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni.
7) More validation is necessary of untrusted GSO packets coming from
virtualization devices, from Willem de Bruijn.
8) Fix endianness of bnxt_en firmware message length accesses, from
Edwin Peer.
9) Fix infinite loop in sch_fq_pie, from Davide Caratti.
10) Fix lockdep splat in DSA by setting lockless TX in netdev features
for slave ports, from Vladimir Oltean.
11) Fix suspend/resume crashes in mlx5, from Mark Bloch.
12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov.
13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu.
14) Fix leak in inetdev_init(), from Yang Yingliang.
15) Don't try to use inet hash and unhash in l2tp code, results in
crashes. From Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
l2tp: add sk_family checks to l2tp_validate_socket
l2tp: do not use inet_hash()/inet_unhash()
net: qrtr: Allocate workqueue before kernel_bind
mptcp: remove msk from the token container at destruction time.
mptcp: fix race between MP_JOIN and close
mptcp: fix unblocking connect()
net/sched: act_ct: add nat mangle action only for NAT-conntrack
devinet: fix memleak in inetdev_init()
virtio_vsock: Fix race condition in virtio_transport_recv_pkt
drivers/net/ibmvnic: Update VNIC protocol version reporting
NFC: st21nfca: add missed kfree_skb() in an error path
neigh: fix ARP retransmit timer guard
bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones
bpf, selftests: Verifier bounds tests need to be updated
bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones
bpf: Fix use-after-free in fmod_ret check
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
net/mlx5e: Fix MLX5_TC_CT dependencies
net/mlx5e: Properly set default values when disabling adaptive moderation
net/mlx5e: Fix arch depending casting issue in FEC
...
The pstore subsystem already had a private version of this function.
With the coming addition of the pstore/zone driver, this needs to be
shared. As it really should live with printk, move it there instead.
Link: https://lore.kernel.org/lkml/20200515184434.8470-4-keescook@chromium.org/
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
kmsg_dump() allows to dump kmesg buffer for various system events: oops,
panic, reboot, etc. It provides an interface to register a callback
call for clients, and in that callback interface there is a field
"max_reason", but it was getting ignored when set to any "reason"
higher than KMSG_DUMP_OOPS unless "always_kmsg_dump" was passed as
kernel parameter.
Allow clients to actually control their "max_reason", and keep the
current behavior when "max_reason" is not set.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-3-keescook@chromium.org/
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
- A few new drivers for the Loongson MIPS platform (HTVEC, PIC, MSI)
- A cleanup of the __irq_domain_add() API
- A cleanup of the IRQ simulator to actually use some of
the irq infrastructure
- Some fixes for the Sifive PLIC when used in a multi-controller
context
- Fixes for the GICv3 ITS to spread interrupts according to the
load of each CPU, and to honor managed interrupts
- Numerous cleanups and documentation fixes
-----BEGIN PGP SIGNATURE-----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=RX31
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- A few new drivers for the Loongson MIPS platform (HTVEC, PIC, MSI)
- A cleanup of the __irq_domain_add() API
- A cleanup of the IRQ simulator to actually use some of
the irq infrastructure
- Some fixes for the Sifive PLIC when used in a multi-controller
context
- Fixes for the GICv3 ITS to spread interrupts according to the
load of each CPU, and to honor managed interrupts
- Numerous cleanups and documentation fixes
Alexei Starovoitov says:
====================
pull-request: bpf 2020-05-29
The following pull-request contains BPF updates for your *net* tree.
We've added 6 non-merge commits during the last 7 day(s) which contain
a total of 4 files changed, 55 insertions(+), 34 deletions(-).
The main changes are:
1) minor verifier fix for fmod_ret progs, from Alexei.
2) af_xdp overflow check, from Bjorn.
3) minor verifier fix for 32bit assignment, from John.
4) powerpc has non-overlapping addr space, from Petr.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
With the latest trunk llvm (llvm 11), I hit a verifier issue for
test_prog subtest test_verif_scale1.
The following simplified example illustrate the issue:
w9 = 0 /* R9_w=inv0 */
r8 = *(u32 *)(r1 + 80) /* __sk_buff->data_end */
r7 = *(u32 *)(r1 + 76) /* __sk_buff->data */
......
w2 = w9 /* R2_w=inv0 */
r6 = r7 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */
r6 += r2 /* R6_w=inv(id=0) */
r3 = r6 /* R3_w=inv(id=0) */
r3 += 14 /* R3_w=inv(id=0) */
if r3 > r8 goto end
r5 = *(u32 *)(r6 + 0) /* R6_w=inv(id=0) */
<== error here: R6 invalid mem access 'inv'
...
end:
In real test_verif_scale1 code, "w9 = 0" and "w2 = w9" are in
different basic blocks.
In the above, after "r6 += r2", r6 becomes a scalar, which eventually
caused the memory access error. The correct register state should be
a pkt pointer.
The inprecise register state starts at "w2 = w9".
The 32bit register w9 is 0, in __reg_assign_32_into_64(),
the 64bit reg->smax_value is assigned to be U32_MAX.
The 64bit reg->smin_value is 0 and the 64bit register
itself remains constant based on reg->var_off.
In adjust_ptr_min_max_vals(), the verifier checks for a known constant,
smin_val must be equal to smax_val. Since they are not equal,
the verifier decides r6 is a unknown scalar, which caused later failure.
The llvm10 does not have this issue as it generates different code:
w9 = 0 /* R9_w=inv0 */
r8 = *(u32 *)(r1 + 80) /* __sk_buff->data_end */
r7 = *(u32 *)(r1 + 76) /* __sk_buff->data */
......
r6 = r7 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */
r6 += r9 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */
r3 = r6 /* R3_w=pkt(id=0,off=0,r=0,imm=0) */
r3 += 14 /* R3_w=pkt(id=0,off=14,r=0,imm=0) */
if r3 > r8 goto end
...
To fix the above issue, we can include zero in the test condition for
assigning the s32_max_value and s32_min_value to their 64-bit equivalents
smax_value and smin_value.
Further, fix the condition to avoid doing zero extension bounds checks
when s32_min_value <= 0. This could allow for the case where bounds
32-bit bounds (-1,1) get incorrectly translated to (0,1) 64-bit bounds.
When in-fact the -1 min value needs to force U32_MAX bound.
Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/159077331983.6014.5758956193749002737.stgit@john-Precision-5820-Tower
This is no point to unlock() and then lock() the same mutex
back to back.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
008847f66c ("workqueue: allow rescuer thread to do more work.") made
the rescuer worker requeue the pwq immediately if there may be more
work items which need rescuing instead of waiting for the next mayday
timer expiration. Unfortunately, it checks only whether the pool needs
help from rescuers, but it doesn't check whether the pwq has work items
in the pool (the real reason that this rescuer can help for the pool).
The patch adds the check and void unneeded requeuing.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The workqueue code has it's internal spinlocks (pool::lock), which
are acquired on most workqueue operations. These spinlocks are
converted to 'sleeping' spinlocks on a RT-kernel.
Workqueue functions can be invoked from contexts which are truly atomic
even on a PREEMPT_RT enabled kernel. Taking sleeping locks from such
contexts is forbidden.
The pool::lock hold times are bound and the code sections are
relatively short, which allows to convert pool::lock and as a
consequence wq_mayday_lock to raw spinlocks which are truly spinning
locks even on a PREEMPT_RT kernel.
With the previous conversion of the manager waitqueue to a simple
waitqueue workqueues are now fully RT compliant.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The workqueue code has it's internal spinlock (pool::lock) and also
implicit spinlock usage in the wq_manager waitqueue. These spinlocks
are converted to 'sleeping' spinlocks on a RT-kernel.
Workqueue functions can be invoked from contexts which are truly atomic
even on a PREEMPT_RT enabled kernel. Taking sleeping locks from such
contexts is forbidden.
pool::lock can be converted to a raw spinlock as the lock held times
are short. But the workqueue manager waitqueue is handled inside of
pool::lock held regions which again violates the lock nesting rules
of raw and regular spinlocks.
The manager waitqueue has no special requirements like custom wakeup
callbacks or mass wakeups. While it does not use exclusive wait mode
explicitly there is no strict requirement to queue the waiters in a
particular order as there is only one waiter at a time.
This allows to replace the waitqueue with rcuwait which solves the
locking problem because rcuwait relies on existing locking.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, the root cgroup does not have a cpu.stat file. Add one which
is consistent with /proc/stat to capture global cpu statistics that
might not fall under cgroup accounting.
We haven't done this in the past because the data are already presented
in /proc/stat and we didn't want to add overhead from collecting root
cgroup stats when cgroups are configured, but no cgroups have been
created.
By keeping the data consistent with /proc/stat, I think we avoid the
first problem, while improving the usability of cgroups stats.
We avoid the second problem by computing the contents of cpu.stat from
existing data collected for /proc/stat anyway.
Signed-off-by: Boris Burkov <boris@bur.io>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
irq_data_get_irq_chip() can return NULL, however it is expected that this
never happens. If a buggy driver leads to NULL being returned from
irq_data_get_irq_chip(), warn about it instead of crashing the machine.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-arm-kernel@lists.infradead.org
Move the prototypes for sched_ttwu_pending() and send_call_function_single_ipi()
into the newly created kernel/sched/smp.h header, to make sure they are all
the same, and to architectures happy that use -Wmissing-prototypes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The recent commit: 90b5363acd ("sched: Clean up scheduler_ipi()")
got smp_call_function_single_async() subtly wrong. Even though it will
return -EBUSY when trying to re-use a csd, that condition is not
atomic and still requires external serialization.
The change in ttwu_queue_remote() got this wrong.
While on first reading ttwu_queue_remote() has an atomic test-and-set
that appears to serialize the use, the matching 'release' is not in
the right place to actually guarantee this serialization.
The actual race is vs the sched_ttwu_pending() call in the idle loop;
that can run the wakeup-list without consuming the CSD.
Instead of trying to chain the lists, merge them.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200526161908.129371594@infradead.org
In preparation of removing rq->wake_list, replace the
!list_empty(rq->wake_list) with rq->ttwu_pending. This is not fully
equivalent as this new variable is racy.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200526161908.070399698@infradead.org
Currently irq_work_queue_on() will issue an unconditional
arch_send_call_function_single_ipi() and has the handler do
irq_work_run().
This is unfortunate in that it makes the IPI handler look at a second
cacheline and it misses the opportunity to avoid the IPI. Instead note
that struct irq_work and struct __call_single_data are very similar in
layout, so use a few bits in the flags word to encode a type and stick
the irq_work on the call_single_queue list.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200526161908.011635912@infradead.org
Just like the ttwu_queue_remote() IPI, make use of _TIF_POLLING_NRFLAG
to avoid sending IPIs to idle CPUs.
[ mingo: Fix UP build bug. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200526161907.953304789@infradead.org
This ensures flush_smp_call_function_queue() is strictly about
call_single_queue.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200526161907.895109676@infradead.org
The call_single_queue can contain (two) different callbacks,
synchronous and asynchronous. The current interrupt handler runs them
in-order, which means that remote CPUs that are waiting for their
synchronous call can be delayed by running asynchronous callbacks.
Rework the interrupt handler to first run the synchonous callbacks.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200526161907.836818381@infradead.org
The recent commit: 90b5363acd ("sched: Clean up scheduler_ipi()")
got smp_call_function_single_async() subtly wrong. Even though it will
return -EBUSY when trying to re-use a csd, that condition is not
atomic and still requires external serialization.
The change in kick_ilb() got this wrong.
While on first reading kick_ilb() has an atomic test-and-set that
appears to serialize the use, the matching 'release' is not in the
right place to actually guarantee this serialization.
Rework the nohz_idle_balance() trigger so that the release is in the
IPI callback and thus guarantees the required serialization for the
CSD.
Fixes: 90b5363acd ("sched: Clean up scheduler_ipi()")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: mgorman@techsingularity.net
Link: https://lore.kernel.org/r/20200526161907.778543557@infradead.org
We are going to rely on the loosening of RCU callback semantics,
introduced by this commit:
806f04e9fd: ("rcu: Allow for smp_call_function() running callbacks from idle")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Current RCU hard relies on smp_call_function() callbacks running from
interrupt context. A pending optimization is going to break that, it
will allow idle CPUs to run the callbacks from the idle loop. This
avoids raising the IPI on the requesting CPU and avoids handling an
exception on the receiving CPU.
Change rcu_is_cpu_rrupt_from_idle() to also accept task context,
provided it is the idle task.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20200527171236.GC706495@hirez.programming.kicks-ass.net
Pull cgroup fixes from Tejun Heo:
- Reverted stricter synchronization for cgroup recursive stats which
was prepping it for event counter usage which never got merged. The
change was causing performation regressions in some cases.
- Restore bpf-based device-cgroup operation even when cgroup1 device
cgroup is disabled.
- An out-param init fix.
* 'for-5.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
device_cgroup: Cleanup cgroup eBPF device filter code
xattr: fix uninitialized out-param
Revert "cgroup: Add memory barriers to plug cgroup_rstat_updated() race window"
Hibernation via snapshot device requires write permission to the swap
block device, the one that more often (but not necessarily) is used to
store the hibernation image.
With this patch, such permissions are granted iff:
1) snapshot device config option is enabled
2) swap partition is used as resume device
In other circumstances the swap device is not writable from userspace.
In order to achieve this, every write attempt to a swap device is
checked against the device configured as part of the uswsusp API [0]
using a pointer to the inode struct in memory. If the swap device being
written was not configured for resuming, the write request is denied.
NOTE: this implementation works only for swap block devices, where the
inode configured by swapon (which sets S_SWAPFILE) is the same used
by SNAPSHOT_SET_SWAP_AREA.
In case of swap file, SNAPSHOT_SET_SWAP_AREA indeed receives the inode
of the block device containing the filesystem where the swap file is
located (+ offset in it) which is never passed to swapon and then has
not set S_SWAPFILE.
As result, the swap file itself (as a file) has never an option to be
written from userspace. Instead it remains writable if accessed directly
from the containing block device, which is always writeable from root.
[0] Documentation/power/userland-swsusp.rst
v2:
- rename is_hibernate_snapshot_dev() to is_hibernate_resume_dev()
- fix description so to correctly refer to the resume device
Signed-off-by: Domenico Andreoli <domenico.andreoli@linux.com>
Acked-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The data structure member "wq->rescuer" was reset to a null pointer
in one if branch. It was passed to a call of the function "kfree"
in the callback function "rcu_free_wq" (which was eventually executed).
The function "kfree" does not perform more meaningful data processing
for a passed null pointer (besides immediately returning from such a call).
Thus delete this function call which became unnecessary with the referenced
software update.
Fixes: def98c84b6 ("workqueue: Fix spurious sanity check failures in destroy_workqueue()")
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Zhang Qiang <qiang.zhang@windriver.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Close the hole of holding a mapping over kernel driver takeover event of
a given address range.
Commit 90a545e981 ("restrict /dev/mem to idle io memory ranges")
introduced CONFIG_IO_STRICT_DEVMEM with the goal of protecting the
kernel against scenarios where a /dev/mem user tramples memory that a
kernel driver owns. However, this protection only prevents *new* read(),
write() and mmap() requests. Established mappings prior to the driver
calling request_mem_region() are left alone.
Especially with persistent memory, and the core kernel metadata that is
stored there, there are plentiful scenarios for a /dev/mem user to
violate the expectations of the driver and cause amplified damage.
Teach request_mem_region() to find and shoot down active /dev/mem
mappings that it believes it has successfully claimed for the exclusive
use of the driver. Effectively a driver call to request_mem_region()
becomes a hole-punch on the /dev/mem device.
The typical usage of unmap_mapping_range() is part of
truncate_pagecache() to punch a hole in a file, but in this case the
implementation is only doing the "first half" of a hole punch. Namely it
is just evacuating current established mappings of the "hole", and it
relies on the fact that /dev/mem establishes mappings in terms of
absolute physical address offsets. Once existing mmap users are
invalidated they can attempt to re-establish the mapping, or attempt to
continue issuing read(2) / write(2) to the invalidated extent, but they
will then be subject to the CONFIG_IO_STRICT_DEVMEM checking that can
block those subsequent accesses.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 90a545e981 ("restrict /dev/mem to idle io memory ranges")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/159009507306.847224.8502634072429766747.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- The default root is where we can create v2 cgroups.
- The __DEVEL__sane_behavior mount option has been removed long long ago.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Provide a debug check which can be invoked from exception return to kernel
mode before an attempt is made to schedule. Warn if RCU is not ready for
this.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20200521202117.089709607@linutronix.de
There will likely be exception handlers that can sleep, which rules
out the usual approach of invoking rcu_nmi_enter() on entry and also
rcu_nmi_exit() on all exit paths. However, the alternative approach of
just not calling anything can prevent RCU from coaxing quiescent states
from nohz_full CPUs that are looping in the kernel: RCU must instead
IPI them explicitly. It would be better to enable the scheduler tick
on such CPUs to interact with RCU in a lighter-weight manner, and this
enabling is one of the things that rcu_nmi_enter() currently does.
What is needed is something that helps RCU coax quiescent states while
not preventing subsequent sleeps. This commit therefore splits out the
nohz_full scheduler-tick enabling from the rest of the rcu_nmi_enter()
logic into a new function named rcu_irq_enter_check_tick().
[ tglx: Renamed the function and made it a nop when context tracking is off ]
[ mingo: Fixed a CONFIG_NO_HZ_FULL assumption, harmonized and fixed all the
comment blocks and cleaned up rcu_nmi_enter()/exit() definitions. ]
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200521202116.996113173@linutronix.de
Stefano reported a crash with using SQPOLL with io_uring:
BUG: kernel NULL pointer dereference, address: 00000000000003b0
CPU: 2 PID: 1307 Comm: io_uring-sq Not tainted 5.7.0-rc7 #11
RIP: 0010:task_numa_work+0x4f/0x2c0
Call Trace:
task_work_run+0x68/0xa0
io_sq_thread+0x252/0x3d0
kthread+0xf9/0x130
ret_from_fork+0x35/0x40
which is task_numa_work() oopsing on current->mm being NULL.
The task work is queued by task_tick_numa(), which checks if current->mm is
NULL at the time of the call. But this state isn't necessarily persistent,
if the kthread is using use_mm() to temporarily adopt the mm of a task.
Change the task_tick_numa() check to exclude kernel threads in general,
as it doesn't make sense to attempt ot balance for kthreads anyway.
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/865de121-8190-5d30-ece5-3b097dc74431@kernel.dk
This contains a large set of cleanups, bug fixes, general improvements
and documentation fixes for the RPMH driver. It adds a debugfs mechanism
for inspecting Command DB. Socinfo got the "soc_id" attribute defines
and definitions for a various variants of MSM8939.
RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH
had to be reverted due to a compilation issue when tracing is enabled.
RPMHPD gained power-domains for the SM8250 voltage corners.
The SCM driver gained fixes for two build warnings and the SMP2P had an
unnecessary error print removed.
-----BEGIN PGP SIGNATURE-----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=tkhb
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.8
This contains a large set of cleanups, bug fixes, general improvements
and documentation fixes for the RPMH driver. It adds a debugfs mechanism
for inspecting Command DB. Socinfo got the "soc_id" attribute defines
and definitions for a various variants of MSM8939.
RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH
had to be reverted due to a compilation issue when tracing is enabled.
RPMHPD gained power-domains for the SM8250 voltage corners.
The SCM driver gained fixes for two build warnings and the SMP2P had an
unnecessary error print removed.
* tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (42 commits)
Revert "soc: qcom: rpmh: Allow RPMH driver to be loaded as a module"
soc: qcom: rpmh-rsc: Remove the pm_lock
soc: qcom: rpmh-rsc: Simplify locking by eliminating the per-TCS lock
kernel/cpu_pm: Fix uninitted local in cpu_pm
soc: qcom: rpmh-rsc: We aren't notified of our own failure w/ NOTIFY_BAD
soc: qcom: rpmh-rsc: Correctly ignore CPU_CLUSTER_PM notifications
firmware: qcom_scm-legacy: Replace zero-length array with flexible-array
soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync()
soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation
soc: qcom: socinfo: add msm8936/39 and apq8036/39 soc ids
soc: qcom: aoss: Add SM8250 compatible
soc: qcom: pdr: Remove impossible error condition
soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner
soc: qcom: rpmhpd: Add SM8250 power domains
firmware: qcom_scm: fix bogous abuse of dma-direct internals
dt-bindings: soc: qcom: apr: Use generic node names for APR services
firmware: qcom_scm: Remove unneeded conversion to bool
soc: qcom: cmd-db: Properly endian swap the slv_id for debugfs
soc: qcom: cmd-db: Use 5 digits for printing address
soc: qcom: cmd-db: Cast sizeof() to int to silence field width warning
...
Link: https://lore.kernel.org/r/20200519052533.1250024-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The previous commit:
c6e7bd7afa: ("sched/core: Optimize ttwu() spinning on p->on_cpu")
avoids spinning on p->on_rq when the task is descheduling, but only if the
wakee is on a CPU that does not share cache with the waker.
This patch offloads the activation of the wakee to the CPU that is about to
go idle if the task is the only one on the runqueue. This potentially allows
the waker task to continue making progress when the wakeup is not strictly
synchronous.
This is very obvious with netperf UDP_STREAM running on localhost. The
waker is sending packets as quickly as possible without waiting for any
reply. It frequently wakes the server for the processing of packets and
when netserver is using local memory, it quickly completes the processing
and goes back to idle. The waker often observes that netserver is on_rq
and spins excessively leading to a drop in throughput.
This is a comparison of 5.7-rc6 against "sched: Optimize ttwu() spinning
on p->on_cpu" and against this patch labeled vanilla, optttwu-v1r1 and
localwakelist-v1r2 respectively.
5.7.0-rc6 5.7.0-rc6 5.7.0-rc6
vanilla optttwu-v1r1 localwakelist-v1r2
Hmean send-64 251.49 ( 0.00%) 258.05 * 2.61%* 305.59 * 21.51%*
Hmean send-128 497.86 ( 0.00%) 519.89 * 4.43%* 600.25 * 20.57%*
Hmean send-256 944.90 ( 0.00%) 997.45 * 5.56%* 1140.19 * 20.67%*
Hmean send-1024 3779.03 ( 0.00%) 3859.18 * 2.12%* 4518.19 * 19.56%*
Hmean send-2048 7030.81 ( 0.00%) 7315.99 * 4.06%* 8683.01 * 23.50%*
Hmean send-3312 10847.44 ( 0.00%) 11149.43 * 2.78%* 12896.71 * 18.89%*
Hmean send-4096 13436.19 ( 0.00%) 13614.09 ( 1.32%) 15041.09 * 11.94%*
Hmean send-8192 22624.49 ( 0.00%) 23265.32 * 2.83%* 24534.96 * 8.44%*
Hmean send-16384 34441.87 ( 0.00%) 36457.15 * 5.85%* 35986.21 * 4.48%*
Note that this benefit is not universal to all wakeups, it only applies
to the case where the waker often spins on p->on_rq.
The impact can be seen from a "perf sched latency" report generated from
a single iteration of one packet size:
-----------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at |
-----------------------------------------------------------------------------------------------------------------
vanilla
netperf:4337 | 21709.193 ms | 2932 | avg: 0.002 ms | max: 0.041 ms | max at: 112.154512 s
netserver:4338 | 14629.459 ms | 5146990 | avg: 0.001 ms | max: 1615.864 ms | max at: 140.134496 s
localwakelist-v1r2
netperf:4339 | 29789.717 ms | 2460 | avg: 0.002 ms | max: 0.059 ms | max at: 138.205389 s
netserver:4340 | 18858.767 ms | 7279005 | avg: 0.001 ms | max: 0.362 ms | max at: 135.709683 s
-----------------------------------------------------------------------------------------------------------------
Note that the average wakeup delay is quite small on both the vanilla
kernel and with the two patches applied. However, there are significant
outliers with the vanilla kernel with the maximum one measured as 1615
milliseconds with a vanilla kernel but never worse than 0.362 ms with
both patches applied and a much higher rate of context switching.
Similarly a separate profile of cycles showed that 2.83% of all cycles
were spent in try_to_wake_up() with almost half of the cycles spent
on spinning on p->on_rq. With the two patches, the percentage of cycles
spent in try_to_wake_up() drops to 1.13%
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: valentin.schneider@arm.com
Cc: Hillf Danton <hdanton@sina.com>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20200524202956.27665-3-mgorman@techsingularity.net
Both Rik and Mel reported seeing ttwu() spend significant time on:
smp_cond_load_acquire(&p->on_cpu, !VAL);
Attempt to avoid this by queueing the wakeup on the CPU that owns the
p->on_cpu value. This will then allow the ttwu() to complete without
further waiting.
Since we run schedule() with interrupts disabled, the IPI is
guaranteed to happen after p->on_cpu is cleared, this is what makes it
safe to queue early.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: valentin.schneider@arm.com
Cc: Hillf Danton <hdanton@sina.com>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20200524202956.27665-2-mgorman@techsingularity.net
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix handling of throttled parents in enqueue_task_fair() completely. The
recent fix overlooked a corner case where the first iteration terminates
do a entiry being on rq which makes the list management incomplete and
later triggers the assertion which checks for completeness.
- Fix a similar problem in unthrottle_cfs_rq().
- Show the correct uclamp values in procfs which prints the effective
value twice instead of requested and effective.
-----BEGIN PGP SIGNATURE-----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=akes
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A set of fixes for the scheduler:
- Fix handling of throttled parents in enqueue_task_fair() completely.
The recent fix overlooked a corner case where the first iteration
terminates due to an entity already being on the runqueue which
makes the list management incomplete and later triggers the
assertion which checks for completeness.
- Fix a similar problem in unthrottle_cfs_rq().
- Show the correct uclamp values in procfs which prints the effective
value twice instead of requested and effective"
* tag 'sched-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix unthrottle_cfs_rq() for leaf_cfs_rq list
sched/debug: Fix requested task uclamp values shown in procfs
sched/fair: Fix enqueue_task_fair() warning some more
If uboot passes a blank string to console_setup then it results in
a trashed memory. Ultimately, the kernel crashes during freeing up
the memory.
This fix checks if there is a blank parameter being
passed to console_setup from uboot. In case it detects that
the console parameter is blank then it doesn't setup the serial
device and it gracefully exits.
Link: https://lore.kernel.org/r/20200522065306.83-1-shreyas.joshi@biamp.com
Signed-off-by: Shreyas Joshi <shreyas.joshi@biamp.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: Better format the commit message and code, remove unnecessary brackets.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
