So it appears that commit 5427f20785 ("drm/i915: Bump wait-times for
the final CS interrupt before parking") was a little over optimistic in
its belief that it had successfully waited for all residual activity on
the engines before parking. Numerous sightings in CI since then of
<7>[ 52.542886] [IGT] core_auth: executing
<3>[ 52.561013] [drm:intel_engines_park [i915]] *ERROR* vcs0 is not idle before parking
<7>[ 52.561215] intel_engines_park vcs0
<7>[ 52.561229] intel_engines_park current seqno 98, last 98, hangcheck 0 [-247449 ms], inflight 0
<7>[ 52.561238] intel_engines_park Reset count: 0
<7>[ 52.561266] intel_engines_park Requests:
<7>[ 52.561363] intel_engines_park RING_START: 0x00000000 [0x00000000]
<7>[ 52.561377] intel_engines_park RING_HEAD: 0x00000000 [0x00000000]
<7>[ 52.561390] intel_engines_park RING_TAIL: 0x00000000 [0x00000000]
<7>[ 52.561406] intel_engines_park RING_CTL: 0x00000000
<7>[ 52.561422] intel_engines_park RING_MODE: 0x00000200 [idle]
<7>[ 52.561442] intel_engines_park ACTHD: 0x00000000_00000000
<7>[ 52.561459] intel_engines_park BBADDR: 0x00000000_00000000
<7>[ 52.561474] intel_engines_park Execlist status: 0x00000301 00000000
<7>[ 52.561489] intel_engines_park Execlist CSB read 5 [5 cached], write 5 [5 from hws], interrupt posted? no
<7>[ 52.561500] intel_engines_park ELSP[0] idle
<7>[ 52.561510] intel_engines_park ELSP[1] idle
<7>[ 52.561519] intel_engines_park HW active? 0x0
<7>[ 52.561608] intel_engines_park Idle? yes
<7>[ 52.561617] intel_engines_park
on Braswell, which indicates that the engine just needs that little bit
longer after flushing the tasklet to settle. So give it a few more
milliseconds before declaring an err and applying the emergency brake.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103479
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110112550.28909-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
intel_uncore_forcewake_reset() does forcewake puts and gets as such
we need to make sure that no-one tries to access the PUNIT->PMIC bus
(on systems where this bus is shared) while it runs, otherwise bad
things happen.
Normally this is taken care of by the i915_pmic_bus_access_notifier()
which does an intel_uncore_forcewake_get(FORCEWAKE_ALL) when some other
driver tries to access the PMIC bus, so that later forcewake gets are
no-ops (for the duration of the bus access).
But intel_uncore_forcewake_reset gets called in 3 cases:
1) Before registering the pmic_bus_access_notifier
2) After unregistering the pmic_bus_access_notifier
3) To reset forcewake state on a GPU reset
In all 3 cases the i915_pmic_bus_access_notifier() protection is
insufficient.
This commit fixes this race by calling iosf_mbi_punit_acquire() before
calling intel_uncore_forcewake_reset(). In the case where it is called
directly after unregistering the pmic_bus_access_notifier, we need to
hold the punit-lock over both calls to avoid a race where
intel_uncore_fw_release_timer() may execute between the 2 calls.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019111620.26761-3-hdegoede@redhat.com
In order to allow the mock breadcrumbs tests to run without device irqs
being enabled, move the intel_irqs_enabled() assert deeper to just
before we commit to enabling the HW irq.
v2: Add a FIXME explaining that placing the assertion so deep is not
ideal, but a compromise for mock breadcrumbs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107102003.1802-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Originally it was anticipated that timeouts would be a rare event, and
so merit a warning that the test was incomplete. However, for igt we
keep the timeout low, and hitting the timeout is intentional. It no
longer necessitates a warning, but to be expected.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110101110.12042-1-chris@chris-wilson.co.uk
Reviwed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Whenever we want to unbind a vma, we must wait on all GPU activity to
complete first. (This is what gives us the ability to do fine grained
eviction and purging by only having to wait on the VMA that we need to
unbind to proceed; though if pushed we can make it a rule that we are
only allowed to unbind already idle VMA and move the burden of the work
and organising the sleep onto the caller.) Currently, we might only
sleep if the vma is still active on the GPU, but in principle
i915_vma_unbind() always implies a sleep, so mark it up with a
might_sleep().
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=103638
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109213450.13875-2-chris@chris-wilson.co.uk
vm_free_page() may call down into set_pages_array_wb() (which itself
sleeps, on x86 at least) but only if on !llc and the caches overflow.
Since this is unlikely, we only rarely trigger the error in practice,
and so to make CI detection of this sleeping bug possible we want to
mark the common vm_free_page() as a potential sleep.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=103638
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109213450.13875-1-chris@chris-wilson.co.uk
Trying to enable printk debugging for GEM is fraught with the issue of
spam; interactions with HW are very frequent and often boring. However,
one instance where they are not so boring is just before a BUG; here
ftrace provides a facility to dump its ringbuffer on an oops. So for CI
let's enable trace_printk() to capture the last exchanges with HW as a
death rattle.
For example,
[ 79.234110] ------------[ cut here ]------------
[ 79.234137] kernel BUG at drivers/gpu/drm/i915/intel_lrc.c:907!
[ 79.234145] invalid opcode: 0000 [#1] SMP
[ 79.234153] Dumping ftrace buffer:
[ 79.234158] ---------------------------------
...
[ 79.314044] gem_conc-1059 1..s1 79203443us : intel_lrc_irq_handler: bcs0 out[0]: ctx=5.2, seqno=145
[ 79.314089] gem_conc-1059 1..s. 79220800us : intel_lrc_irq_handler: bcs0 csb[1/1]: status=0x00000018:0x00000005
[ 79.314133] gem_conc-1059 1..s. 79220803us : intel_lrc_irq_handler: bcs0 out[0]: ctx=5.1, seqno=145
[ 79.314177] gem_conc-1062 2..s1 79230458us : intel_lrc_irq_handler: bcs0 in[0]: ctx=8.1, seqno=146
[ 79.314220] gem_conc-1062 2..s1 79230515us : intel_lrc_irq_handler: bcs0 in[0]: ctx=8.2, seqno=147
[ 79.314265] gem_conc-1059 1..s1 79230951us : intel_lrc_irq_handler: bcs0 csb[2/3]: status=0x00000012:0x00000008
[ 79.314309] gem_conc-1059 1..s1 79230954us : intel_lrc_irq_handler: bcs0 out[0]: ctx=8.2, seqno=147
[ 79.314353] gem_conc-1059 1..s1 79230954us : intel_lrc_irq_handler: bcs0 csb[3/3]: status=0x00008002:0x00000008
[ 79.314396] gem_conc-1059 1..s1 79230955us : intel_lrc_irq_handler: bcs0 out[0]: ctx=8.1, seqno=147
[ 79.314402] ---------------------------------
v2: Tweak the formatting to be more consistent between in/out.
v3: do {} while (0) stub macro protection
Suggested-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109143019.16568-1-chris@chris-wilson.co.uk
Eliminate a ton of pointless 'dev' variables in the DP code, and pass
around 'dev_priv' instead of 'dev'.
v2: Rebase
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109152758.32257-1-ville.syrjala@linux.intel.com
No need to pass 'dev' or 'dev_priv' when the function already takes
'intel_dp'. Also let's prefer passing 'dev_priv' instead of 'dev'
when we have to pass one or the other.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-10-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Replace dig_port->port with encoder->port in the BXT DPLL selection.
We can do this because both the master encoder and the fake MST encoders
have the same encoder->port value, whereas using dig_port->port only
worked for the master encoder since the fake encoders were't derived
from intel_digital_port. This eliminates the DP MST special case.
Do this by hand because spatch is having problems with the control
flow due to the dig_port assignment happening in two different
branches.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-8-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Replace crtc->config usage with the passed down crtc state.
Also take the opportunity for some s/pipe_config/crtc_state/ while at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-7-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Rather than digging through encoder->crtc and crtc->config in the
DPIO PHY functions, pass down the correct crtc state from the caller.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-6-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
When we close the VMA, we unbind it from the ppgtt and tear down the
page directory pointing at it. That may trigger us to return WC pages
back to the system, requiring conversion back to WB which itself may
sleep. That makes i915_vma_close() unsuitable for use inside the RCU
read lock, which we need to hold to iterate the radixtree.
The fix is quite simple, we can close all the VMA as we close the ppgtt,
we only need to do that instead of closing them during destruction of
the LUT.
v2: Order between closing the LUT and the ppgtt is important; we use the
vma inside the LUT as a means of retrieving the object, and so we must
clear the LUT before freeing the VMA when closing the ppgtt.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103638
Fixes: 547da76b57 ("drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr)")
Fixes: d1b48c1e71 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109085540.32264-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 94dec87159)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Apparently setting up a bunch of GT registers before we've properly
initialized the rest of the GT hardware leads to these setting being
lost. So looks like I broke HSW with commit b7048ea12f ("drm/i915:
Do .init_clock_gating() earlier to avoid it clobbering watermarks")
by doing init_clock_gating() too early. This should actually affect
other platforms as well, but apparently not to such a great degree.
What I was ultimately after in that commit was to move the
ilk_init_lp_watermarks() call earlier. So let's undo the damage and
move init_clock_gating() back to where it was, and call
ilk_init_lp_watermarks() just before the watermark state readout.
This highlights how fragile and messed up our init order really is.
I wonder why we even initialize the display before gem. The opposite
order would make much more sense to me...
v2: Keep WaRsPkgCStateDisplayPMReq:hsw early as it really must
be done before all planes might get disabled.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reported-by: Mark Janes <mark.a.janes@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103549
Fixes: b7048ea12f ("drm/i915: Do .init_clock_gating() earlier to avoid it clobbering watermarks")
References: https://lists.freedesktop.org/archives/intel-gfx/2017-November/145432.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171108133555.14091-1-ville.syrjala@linux.intel.com
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit f72b84c677)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The shared fence array is not autopruning and may continue to grow as an
object is shared between new timelines. Take the opportunity when we
think the object is idle (we have to confirm that any external fence is
also signaled) to decouple all the fences.
We apply a similar trick after waiting on an object, see commit
e54ca97747 ("drm/i915: Remove completed fences after a wait")
v2: No longer need to handle the batch pool as a special case.
v3: Need to trylock from within i915_vma_retire as this may be called
form the shrinker - and we may later try to allocate underneath the
reservation lock, so a deadlock is possible.
References: https://bugs.freedesktop.org/show_bug.cgi?id=102936
Fixes: d07f0e59b2 ("drm/i915: Move GEM activity tracking into a common struct reservation_object")
Fixes: 80b204bce8 ("drm/i915: Enable multiple timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107220656.5020-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 1ab22356b3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The handling of contexts are peculiar. Instead of tieing their vma to
activity, we pin the context. This means that we cannot simply unbind
the context object itself at will (which would normally cause us to wait
for the vma to be idle), but must manually idle the GPU and retire
requests first.
A consequence of this peculiarity is when doing a last desperate attempt
to recover memory. If the memory is tied up inside active context
objects, we will fail to recover any memory simply by trying to unbind
the objects without first doing a wait-for-idle.
A side-effect of removing the call to shrinker_lock_uninterruptible()
from i915_gem_shrinker_oom() was that we removed an unlocked
wait-for-idle, and so lost the "natural" shrinkage of context objects.
By replacing that with a locked wait from inside i915_gem_shrink(), we
not only replace it with the ability to recover all context objects, but
do so for all i915_gem_shrink_all() callers.
v2: Switching requires request allocation, which is not permitted from
inside the shrinker as it only uses ordinary allocations.
References: https://bugs.freedesktop.org/show_bug.cgi?id=102936
Fixes: f2123818ff ("drm/i915: Move dev_priv->mm.[un]bound_list to its own lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171108094400.1386-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 2f6a378383)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The watermarks it should calculate against are the old optimal watermarks.
The currently active crtc watermarks are pure fiction, and are invalid in
case of a nonblocking modeset, page flip enabling/disabling planes or any
other reason.
When the crtc is disabled or during a modeset the intermediate watermarks
don't need to be programmed separately, and could be directly assigned
to the optimal watermarks.
Changes since v1:
- Use intel_atomic_get_old_crtc_state. (ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-2-maarten.lankhorst@linux.intel.com
[mlankhorst: Add cc stable and bugzilla link, since previous patch doesn't fix issue by itself]
Cc: stable@vger.kernel.org #v4.8+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373
(cherry picked from commit b6b178a772)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When running under virtualization (vGPU active), we must disable
the lazy PPGTT page table initialization optimization introduced by
commit 1482667324 ("drm/i915: Only initialize partially filled
pagetables").
We must do this because GVT-g makes unduly assumptions about guest
behaviour, which this optimization breaks. This results in following
looking errors in the host:
ERROR gvt: guest page write error -22, gfn 0x7ada8, pa 0x7ada89a8, var 0x6, len 1
The real fix is to not to depend on i915 driver behaviour, but instead
either rely on only the contracts that i915 has with the hardware, or
add some paravirtualization. While the real fix is en route, it won't
be finished in time for 4.15, so the best option is to disable the
optimization for now when vGPU is active to avoid breaking 4.15 guests
in existing VM environments.
Fixes: 1482667324 ("drm/i915: Only initialize partially filled pagetables")
Suggested-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
[Joonas: Rewrote the commit message and added tags.]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023153209.10527-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 22a8a4fc93)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Originally we set the priority to max upon inserting the request into
the execlists queue (and removing it from the scheduler lists). We could
then use the prio==INT_MAX as a shortcut within execlists_schedule() to
detect the end of the dependency chain. Since commit 1f181225f8
("drm/i915/execlists: Keep request->priority for its lifetime") this is
no longer true as we use the request completion as an indicator the
schedule dependency chain is complete instead. (This allows us to then
reschedule requests even when its context is in flight.) However, this
makes the GEM_BUG_ON() inside execlists_schedule() racy as we may change
the rq->prio at the same time. As the assertion is useful, let's keep
the assertion and remove the micro-optimisation.
Fixes: 1f181225f8 ("drm/i915/execlists: Keep request->priority for its lifetime")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024115501.21033-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 64b80085dd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Back in commit a4b2b01523 ("drm/i915: Don't mark an execlists
context-switch when idle") we noticed the presence of late
context-switch interrupts. We were able to filter those out by looking
at whether the ELSP remained active, but in commit beecec9017
("drm/i915/execlists: Preemption!") that became problematic as we now
anticipate receiving a context-switch event for preemption while ELSP
may be empty. To restore the spurious interrupt suppression, add a
counter for the expected number of pending context-switches and skip if
we do not need to handle this interrupt to make forward progress.
v2: Don't forget to switch on for preempt.
v3: Reduce the counter to a on/off boolean tracker. Declare the HW as
active when we first submit, and idle after the final completion event
(with which we confirm the HW says it is idle), and track each source
of activity separately. With a finite number of sources, it should aide
us in debugging which gets stuck.
Fixes: beecec9017 ("drm/i915/execlists: Preemption!")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023213237.26536-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
(cherry picked from commit 4a118ecbe9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When we close the VMA, we unbind it from the ppgtt and tear down the
page directory pointing at it. That may trigger us to return WC pages
back to the system, requiring conversion back to WB which itself may
sleep. That makes i915_vma_close() unsuitable for use inside the RCU
read lock, which we need to hold to iterate the radixtree.
The fix is quite simple, we can close all the VMA as we close the ppgtt,
we only need to do that instead of closing them during destruction of
the LUT.
v2: Order between closing the LUT and the ppgtt is important; we use the
vma inside the LUT as a means of retrieving the object, and so we must
clear the LUT before freeing the VMA when closing the ppgtt.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103638
Fixes: 547da76b57 ("drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr)")
Fixes: d1b48c1e71 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109085540.32264-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We can program GUC_SHIM_CONTROL register with all expected
bits without use of extra macro defined in fwif.h
v2: rebased without pre-prod code
v3: fixed typo
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103151816.62048-4-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We don't keep the workarounds for pre-production hardware
(see intel_detect_preproduction_hw) thus we can drop some
extra steps during firmware upload needed only for unsupported
platforms.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103151816.62048-3-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We silently assumed that DMA transfer will be completed
within assumed timeout and thus we were waiting only at
last step for GuC to become ready. Add intermediate wait
to catch unexpected delays in DMA transfer.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103151816.62048-2-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Transfer of GuC firmware requires few steps that currently
are implemented in two large functions. Split this code into
smaller functions to make these steps small and clear.
Also be prepared for potential DMA xfer step failure.
v2: rename function steps (Sagar)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103151816.62048-1-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The workaround for this is described as:
"if RenderSurfaceState.Num_Multisamples > 1, disable RCC clock gating if
RenderSurfaceState.Num_Multisamples == 1, set 0x7010[14] = 1"
Further documentation in the internal bug referenced by the bspec
suggest that any of the above suggestions should suffice to fix the
issue. We are going with disabling RCC clock gating.
Unfortunately, what we are doing doesn't match the name of the
workaround, but at least it matches its description.
This change improves CNL stability by avoiding some of the hangs seen in
the platform.
v2: Only disable RCC clock gating.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103183027.5051-1-rafael.antognolli@intel.com
Apparently setting up a bunch of GT registers before we've properly
initialized the rest of the GT hardware leads to these setting being
lost. So looks like I broke HSW with commit b7048ea12f ("drm/i915:
Do .init_clock_gating() earlier to avoid it clobbering watermarks")
by doing init_clock_gating() too early. This should actually affect
other platforms as well, but apparently not to such a great degree.
What I was ultimately after in that commit was to move the
ilk_init_lp_watermarks() call earlier. So let's undo the damage and
move init_clock_gating() back to where it was, and call
ilk_init_lp_watermarks() just before the watermark state readout.
This highlights how fragile and messed up our init order really is.
I wonder why we even initialize the display before gem. The opposite
order would make much more sense to me...
v2: Keep WaRsPkgCStateDisplayPMReq:hsw early as it really must
be done before all planes might get disabled.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reported-by: Mark Janes <mark.a.janes@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103549
Fixes: b7048ea12f ("drm/i915: Do .init_clock_gating() earlier to avoid it clobbering watermarks")
References: https://lists.freedesktop.org/archives/intel-gfx/2017-November/145432.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171108133555.14091-1-ville.syrjala@linux.intel.com
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The shared fence array is not autopruning and may continue to grow as an
object is shared between new timelines. Take the opportunity when we
think the object is idle (we have to confirm that any external fence is
also signaled) to decouple all the fences.
We apply a similar trick after waiting on an object, see commit
e54ca97747 ("drm/i915: Remove completed fences after a wait")
v2: No longer need to handle the batch pool as a special case.
v3: Need to trylock from within i915_vma_retire as this may be called
form the shrinker - and we may later try to allocate underneath the
reservation lock, so a deadlock is possible.
References: https://bugs.freedesktop.org/show_bug.cgi?id=102936
Fixes: d07f0e59b2 ("drm/i915: Move GEM activity tracking into a common struct reservation_object")
Fixes: 80b204bce8 ("drm/i915: Enable multiple timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107220656.5020-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The handling of contexts are peculiar. Instead of tieing their vma to
activity, we pin the context. This means that we cannot simply unbind
the context object itself at will (which would normally cause us to wait
for the vma to be idle), but must manually idle the GPU and retire
requests first.
A consequence of this peculiarity is when doing a last desperate attempt
to recover memory. If the memory is tied up inside active context
objects, we will fail to recover any memory simply by trying to unbind
the objects without first doing a wait-for-idle.
A side-effect of removing the call to shrinker_lock_uninterruptible()
from i915_gem_shrinker_oom() was that we removed an unlocked
wait-for-idle, and so lost the "natural" shrinkage of context objects.
By replacing that with a locked wait from inside i915_gem_shrink(), we
not only replace it with the ability to recover all context objects, but
do so for all i915_gem_shrink_all() callers.
v2: Switching requires request allocation, which is not permitted from
inside the shrinker as it only uses ordinary allocations.
References: https://bugs.freedesktop.org/show_bug.cgi?id=102936
Fixes: f2123818ff ("drm/i915: Move dev_priv->mm.[un]bound_list to its own lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171108094400.1386-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since the partial tiling tests are poking into the GGTT to watch the
fence registers in operation, it itself needs the device rpm wakeref in
order for the GGTT to remain accessible.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107115653.10716-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
The vma routines are responsible for acquiring the device rpm wakeref
before they poke the HW. However, some of the selftests bypass the
higher level vma routines in order to poke directly at the lowlevel GGTT
functions; these are then responsible for managing rpm themselves.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107114051.10583-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
If we only have 4k pages, we can't mix together different combinations
of hugepages to see if the world burns. However, as the loops did
nothing, we never set err to 0 and reported ENODEV aborting the test.
Teach the test to skip instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107110559.6098-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Smatch warns of
drivers/gpu/drm/i915/intel_pm.c:1161 g4x_compute_wm() warn: signedness bug returning '(-33554430)'
which is a result of it believing that wm may be INT_MAX following
g4x_tlb_miss_wa(). Just declaring g4x_tlb_miss_wa() as returning an
unsigned integer is not sufficient, we need to tell smatch that wm itself
is unsigned for it to not worry. So mark up the locals we expect to be
non-negative, and so silence smatch.
v2: Mark up vlv_compute_wm_level() as unsigned similarly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20171107140338.13748-1-chris@chris-wilson.co.uk
Older compilers (gcc-4.9) are not as able to track uninitialised
variables as well as more recent compilers. In particular,
drivers/gpu/drm/i915/intel_dpio_phy.c: In function ‘bxt_ddi_phy_init’:
drivers/gpu/drm/i915/intel_dpio_phy.c:482:25: warning: ‘was_enabled’ may be used uninitialized in this function [-Wmaybe-uninitialized]
In this case, we can rearrange code slightly to make the control flow
clearer to the reader, as well as the compiler. That is we only call
uninit using the same predicate as calling init
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107135324.28300-1-chris@chris-wilson.co.uk
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
gcc-4.7 is not very smart and can not tell that "si" is guarded by size
being 0. So it complains,
drivers/gpu/drm/i915/intel_csr.c: In function ‘csr_load_work_fn’:
drivers/gpu/drm/i915/intel_csr.c:204:3: warning: ‘si’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gpu/drm/i915/intel_csr.c:190:30: note: ‘si’ was declared in
Give in and mark si as NULL.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107145334.27154-1-chris@chris-wilson.co.uk
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue
If we move the shift into each case not only do we kill the warning from
smatch, but we shrink the code slightly:
text data bss dec hex filename
1267906 20587 3168 1291661 13b58d before
1267890 20587 3168 1291645 13b57d after
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107154055.19460-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Capturing and cleanup and modparams in error state requires
some macro tricks. Move that code into separated functions
for easier maintenance.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026173657.49648-3-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We keep details of GuC and HuC in separate error state struct.
Make GuC log part of it to group all related data together.
Since we are printing uC details at the end, with this change
GuC log will be moved there too.
v2: comment on new placement of the log (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026173657.49648-2-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Include GuC and HuC firmware details in captured error state
to provide additional debug information. To reuse existing
uc firmware pretty printer, introduce new drm-printer variant
that works with our i915_error_state_buf output. Also update
uc firmware pretty printer to accept const input.
v2: don't rely on current caps (Chris)
dump correct fw info (Michal)
v3: simplify capture of custom paths (Chris)
v4: improve 'why' comment (Joonas)
trim output if no fw path (Michal)
group code around uc error state (Michal)
v5: use error in cleanup_uc (Michal)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026173657.49648-1-michal.wajdeczko@intel.com
[ickle: allow printing uc_fw after allocation failure]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Silence smatch by demonstrating that ctch->vma is allocated
following a successful chch_init()
drivers/gpu/drm/i915/intel_guc_ct.c:204 ctch_open() error:
we previously assumed 'ctch->vma' could be null (see line 197)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106135154.52520-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Silence smatch by demonstrating that guc->stage_desc_pool is allocated
following a successful guc_stage_desc_pool_create(),
drivers/gpu/drm/i915/i915_guc_submission.c:1293 i915_guc_submission_init() error: we previously assumed 'guc->stage_desc_pool' could be null (see line 1261)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106114833.31199-1-chris@chris-wilson.co.uk
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
As we bind, and unbind on error, we want to be sure that the vma->flags
are updated to reflect the binding state so that on the next invocation
all is well.
v2: Take two.
v3: Take three; vma-misplaced is checking map-and-fenceable so keep it
last!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171105124550.32715-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
- PSR state tracking in crtc state (Ville)
- Fix eviction when the GGTT is idle but full (Chris)
- BDW DP aux channel timeout fix (James)
- LSPCON detection fixes (Shashank)
- Use for_each_pipe to iterate over pipes (Mika Kahola)
- Replace *_reference/unreference() or *_ref/unref with _get/put() (Harsha)
- Refactoring and preparation for DDI encoder type cleanup (Ville)
- Broadwell DDI FDI buf translation fix (Chris)
- Read CSB and CSB write pointer from HWSP in GVT-g VM if available (Weinan)
- GuC/HuC firmware loader refactoring (Michal)
- Make shrinking more effective and not stall so much (Chris)
- Cannonlake PLL fixes (Rodrigo)
- DP MST connector error propagation fixes (James)
- Convert timers to use timer_setup (Kees Cook)
- Skylake plane enable/disable unification (Juha-Pekka)
- Fix to actually free driver internal objects when requested (Chris)
- DDI buf trans refactoring (Ville)
- Skip waking the device to service pwrite (Chris)
- Improve DSI VBT backlight parsing abstraction (Madhav)
- Cannonlake VBT DDC pin mapping fix (Rodrigo)
-----BEGIN PGP SIGNATURE-----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=fQeu
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2017-10-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
This time really the last i915 batch for v4.15:
- PSR state tracking in crtc state (Ville)
- Fix eviction when the GGTT is idle but full (Chris)
- BDW DP aux channel timeout fix (James)
- LSPCON detection fixes (Shashank)
- Use for_each_pipe to iterate over pipes (Mika Kahola)
- Replace *_reference/unreference() or *_ref/unref with _get/put() (Harsha)
- Refactoring and preparation for DDI encoder type cleanup (Ville)
- Broadwell DDI FDI buf translation fix (Chris)
- Read CSB and CSB write pointer from HWSP in GVT-g VM if available (Weinan)
- GuC/HuC firmware loader refactoring (Michal)
- Make shrinking more effective and not stall so much (Chris)
- Cannonlake PLL fixes (Rodrigo)
- DP MST connector error propagation fixes (James)
- Convert timers to use timer_setup (Kees Cook)
- Skylake plane enable/disable unification (Juha-Pekka)
- Fix to actually free driver internal objects when requested (Chris)
- DDI buf trans refactoring (Ville)
- Skip waking the device to service pwrite (Chris)
- Improve DSI VBT backlight parsing abstraction (Madhav)
- Cannonlake VBT DDC pin mapping fix (Rodrigo)
* tag 'drm-intel-next-2017-10-23' of git://anongit.freedesktop.org/drm/drm-intel: (87 commits)
drm/i915: Update DRIVER_DATE to 20171023
drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.
drm/i915: Let's use more enum intel_dpll_id pll_id.
drm/i915: Use existing DSI backlight ports info
drm/i915: Parse DSI backlight/cabc ports.
drm/i915: Skip waking the device to service pwrite
drm/i915/crt: split compute_config hook by platforms
drm/i915: remove g4x lowfreq_avail and has_pipe_cxsr
drm/i915: Drop the redundant hdmi prefix/suffix from a lot of variables
drm/i915: Unify error handling for missing DDI buf trans tables
drm/i915: Centralize the SKL DDI A/E vs. B/C/D buf trans handling
drm/i915: Kill off the BXT buf_trans default_index
drm/i915: Pass encoder type to cnl_ddi_vswing_sequence() explicitly
drm/i915: Integrate BXT into intel_ddi_dp_voltage_max()
drm/i915: Pass the level to intel_prepare_hdmi_ddi_buffers()
drm/i915: Pass the encoder type explicitly to skl_set_iboost()
drm/i915: Extract intel_ddi_get_buf_trans_hdmi()
drm/i915: Relocate intel_ddi_get_buf_trans_*() functions
drm/i915: Flush the idle-worker for debugfs/i915_drop_caches
drm/i915: adjust get_crtc_fence_y_offset() to use base.y instead of crtc.y
...
After a reset, we may immediately begin executing requests on restarting
the engines. Ergo this has to be last step with all re-initialisation
completed beforehand. The mocs setup was after we started executing the
requests; do it earlier!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102131430.22328-1-chris@chris-wilson.co.uk
GEM_BUG_ON if the packed bits do not fit into the specified width.
v2: Avoid using the macro argument twice.
v3: Drop unnecessary braces. (Joonas)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103090538.14474-1-tvrtko.ursulin@linux.intel.com
We have to reject unknown flags for uAPI considerations, and also
because the curent implementation limits their i915 storage space
to two bits.
v2: (Chris Wilson)
* Fix fail in ABI check.
* Added unknown flags and BUILD_BUG_ON.
v3:
* Use ARCH_KMALLOC_MINALIGN instead of alignof. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: cf6e7bac63 ("drm/i915: Add support for drm syncobjs")
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031102326.9738-1-tvrtko.ursulin@linux.intel.com
Because dev_priv is 0-ed it's not currently an issue, but since we
have dev_priv->perf.oa.test_config.uuid size at uuid + 1, we could
just copy the null character.
v2: Use strlcpy instead of strncpy (Chris)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102121827.436-1-lionel.g.landwerlin@intel.com
There is a possibility on gen9 hardware to miss the forcewake ack
message. The recommended workaround is to use another free
bit and toggle it until original bit is successfully acknowledged.
Some future gen9 revs might or might not fix the underlying issue but
using fallback forcewake bit dance can be considered as harmless:
without the ack timeout we never reach the fallback bit forcewake.
Thus as of now we adopt a blanket approach for all gen9 and leave
the bypassing the fallback bit approach for future patches if
corresponding hw revisions do appear.
Commit 83e3337204 ("drm/i915: Increase maximum polling time to 50ms
for forcewake request/clear ack") did increase the forcewake timeout.
If the issue was a delayed ack, future work could include finding
a suitable timeout value both for primary ack and reserve toggle
to reduce the worst case latency.
v2: use bit 15, naming, comment (Chris), only wait fallback ack
v3: fix return on fallback, backoff after fallback write (Chris)
v4: udelay on first pass, grammar (Chris)
v4: s/reserve/fallback
References: HSDES #1604254524
References: https://bugs.freedesktop.org/show_bug.cgi?id=102051
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102094836.2506-1-mika.kuoppala@linux.intel.com
This patch adds per engine reset and recovery (TDR) support when GuC is
used to submit workloads to GPU.
In the case of i915 directly submission to ELSP, driver manages hang
detection, recovery and resubmission. With GuC submission these tasks
are shared between driver and GuC. i915 is still responsible for detecting
a hang, and when it does it only requests GuC to reset that Engine. GuC
internally manages acquiring forcewake and idling the engine before
resetting it.
Once the reset is successful, i915 takes over again and handles the
resubmission. The scheduler in i915 knows which requests are pending so
after resetting a engine, pending workloads/requests are resubmitted
again.
v2: s/i915_guc_request_engine_reset/i915_guc_reset_engine/ to match the
non-guc function names.
v3: Removed debug message about engine restarting from which request,
since the new baseline do it regardless of submission mode. (Chris)
v4: Rebase.
v5: Do not pass unnecessary reporting flags to the fw (Jeff);
tasklet_schedule(&execlists->irq_tasklet) handles the resubmit; rebase.
v6: Rename the existing reset engine function and share a similar
interface between guc and non-guc paths (Chris).
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031225309.10888-1-michel.thierry@intel.com
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
intel_guc_reset sounds more like the microcontroller is the one performing
a reset, while in this case is the opposite. intel_reset_guc not only
makes it clearer, it follows the other intel_reset functions available.
v2: Print error message in English (Tvrtko).
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030185616.32836-2-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
If GuC firmware performs an engine reset while that engine had a
preemption pending, it will set the terminated attribute bit on our
preemption stage descriptor. GuC firmware retains all pending work
items for a high-priority GuC client, unlike the normal-priority GuC
client where work items are dropped. It wants to make sure the preempt-
to-idle work doesn't run when scheduling resumes, and uses this bit to
inform its scheduler and presumably us as well. Our job is to clear it
for the next preemption after reset, otherwise that and future
preemptions will never complete. We'll just clear it every time.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101221630.25086-1-jeff.mcgee@intel.com
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZ9kEFAAoJEHm+PkMAQRiGw6wH/0j197qyGd0hkVFMJO6LAgN3
KQWS4nZ5BkVDocwv0RVnUJTtXqU1eozFgdVEtSoaFXpzlHGuptR2Tau9efDCJ7w3
/utZxqvhGebZd2T+j+/o/LE8BRQxhADBNJq2D/o0WNt8ecxuG0GIkhkEYt/o3z1v
/sxlwVwzXB7Dc/h1WcgGJG7cS6L9KzzAzGAS/iNvdFrPOygHBv8c0MxVZIiBIeeK
1nZdyvbyM8uenSyG+prGt9ENrqXZxxfwUxIchi2V7A9m1WmD5zijNkf1JCWji/O+
UsA1auxna7MwoxjxqZuGm4MlKOwZ+8xutk4JGgc+aP/ulndJbJYu+4op/3vaFBM=
=Mhx+
-----END PGP SIGNATURE-----
Backmerge tag 'v4.14-rc7' into drm-next
Linux 4.14-rc7
Requested by Ben Skeggs for nouveau to avoid major conflicts,
and things were getting a bit conflicty already, esp around amdgpu
reverts.
For Cannonlake the number of scalers for each pipe is 2. Let's increase
the number of scalers for pipe C.
v2: Use INTEL_GEN() instead of IS_CANNONLAKE()
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1509530930-24960-1-git-send-email-mika.kahola@intel.com
We will want to break this down to give detailed per-engine warnings as
to why we still think we are active as we attempt to park the engines.
For the first step, just move the warning verbatim from the idle-worker
to intel_engines_park().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027110617.31745-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
We will disarm the breadcrumb interrupt if we see a user interrupt
whilst no one is waiting. This may race with the call to
intel_engine_disarm_breadcrumbs() triggering an assert that we aren't
trying to do the same job twice. Prevent this by checking that the irq
is still armed after flushing the interrupt (for the irq spinlock).
Fixes: bcbd5c33a3 ("drm/i915/guc: Always enable the breadcrumbs irq")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031122235.1395-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In case the object has changed tiling between calls to execbuf, we need
to check if the existing offset inside the GTT matches the new tiling
constraint. We even need to do this for "unfenced" tiled objects, where
the 3D commands use an implied fence and so the object still needs to
match the physical fence restrictions on alignment (only required for
gen2 and early gen3).
In commit 2889caa923 ("drm/i915: Eliminate lots of iterations over
the execobjects array"), the idea was to remove the second guessing and
only set the NEEDS_MAP flag when required. However, the entire check
for an unusable offset for fencing was removed and not just the
secondary check. I.e.
/* avoid costly ping-pong once a batch bo ended up non-mappable */
if (entry->flags & __EXEC_OBJECT_NEEDS_MAP &&
!i915_vma_is_map_and_fenceable(vma))
return !only_mappable_for_reloc(entry->flags);
was entirely removed as the ping-pong between execbuf passes was fixed,
but its primary purpose in forcing unaligned unfenced access to be
rebound was forgotten.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103502
Fixes: 2889caa923 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031103607.17836-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
There is no need check if PPGTT is disabled because that not possible
in CNL. Execlists and GuC submission modes rely on at least aliasing
PPGTT and even intel_sanitize_enable_ppgtt says: "We don't allow disabling
PPGTT for gen9+ as it's a requirement for execlists, the sole mechanism
available to submit work."
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027223207.7869-1-michel.thierry@intel.com
encoder->type isn't genreally safe around DDI ports, so let's
replace some uses in the audio code with the crtc state's
output_types instead.
Actually in these cases encoder->type would work since the DP
SST case is only relevant for VLV/CHV and encoder->type==DP
is a thing on those platforms. The DP MST cases would work
as well since MST encoder->type==DP_MST always. But I think
it's best to try and minimize the encoder->type use in general
to avoid showing a bad example to people.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030184654.17429-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Explicitly pass the crtc and connector states into the audio
code enable/disable hooks, and plumb them all the way down.
This gets rid of almost all crtc->config and encoder->crtc
uses. The one place where we still use them is
i915_audio_component_sync_audio_rate() since that gets called from
the audio driver and we don't have explicit states around then.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030184654.17429-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
To quote kbuild/makefiles.txt:
cc-disable-warning checks if gcc supports a given warning and returns
the commandline switch to disable it. This special function is needed,
because gcc 4.4 and later accept any unknown -Wno-* option and only
warn about it if there is another warning in the source file.
This is exactly what we were trying to achieve with cc-option -Wno-foo and
failed miserably.
Reported-by: kbuild-all@01.org
Fixes: 39bf4de89f ("drm/i915: Add -Wall -Wextra to our build, set warnings to full")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030172927.18158-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Eliminate the partially duplicated DDI readout code from MST, and
instead just call intel_ddi_get_config(). As a nice bonus we get
more cross checking as intel_ddi_get_config() will populate
output_types based on the actual mode of the DDI port.
Additonally intel_ddi_get_config() must be changed to get the crtc
from the passed in crtc state rather than from the encoder->crtc link.
encoder->crtc really shouldn't be used anyway.
v2: Rebased on BXT MST latency_optim fix
Make intel_ddi_clock_get() static
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-7-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Pass an old crtc state to intel_ddi_post_disable() from the MST code.
Note that this crtc state won't necessaitly match the one that was
passed to intel_ddi_pre_enable() if the first stream to be enabled isn't
the last stream to be disabled. But this is fine since the states should
be identical in every important way. This does mean people frobbing
the DDI pre_enable/post_disable hooks have to pay attention in what
parts of the state they consult.
The alternative would be to inline the relevant code into the MST code.
That is actually what we used to do for pre_enable before
commit e081c8463a ("drm/i915: Remove duplicate DDI enabling logic
from MST path"). For post_disable we've always called the DDI hook.
v2: Pimp up the comments explaining the MST issues
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
We should be using the DPLL hw state we got from the current crtc state
to determine the corresponding port clock frequency rather than getting
it via the current state programmed into the DPLL.
v2: Rebase due to intel_dpll_id changes
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-5-ville.syrjala@linux.intel.com
encoder->port works for FDI, and it also works for MST (regardless of
whether we're dealing with the "fake" MST encoder, or mst->primary).
So let's eliminate intel_ddi_get_encoder_port().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-4-ville.syrjala@linux.intel.com
Currently the DDI encoder->type will change at runtime depending on
what kind of hotplugs we've processed. That's quite bad since we can't
really trust that that current value of encoder->type actually matches
the type of signal we're trying to drive through it.
Let's eliminate that problem by declaring that non-eDP DDI port will
always have the encoder type as INTEL_OUTPUT_DDI. This means the code
can no longer try to distinguish DP vs. HDMI based on encoder->type.
We'll leave eDP as INTEL_OUTPUT_EDP, since it'll never change and
there's a bunch of code that relies on that value to identify eDP
encoders.
We'll introduce a new encoder .compute_output_type() hook. This allows
us to compute the full output_types before any encoder .compute_config()
hooks get called, thus those hooks can rely on output_types being
correct, which is useful for cloning on oldr platforms. For now we'll
just look at the connector type and pick the correct mode based on that.
In the future the new hook could be used to implement dynamic switching
between LS and PCON modes for LSPCON.
v2: Fix BXT/GLK PPS explosion with DSI/MST encoders
v3: Avoid the PPS warn on pure HDMI/DVI DDI encoders by checking dp.output_reg
v4: Rebase
v5: Populate output_types in .get_config() rather than in the caller
v5: Split out populating output_types in .get_config() (Maarten)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Rather than having the caller of .get_config() set output_types based on
encoder->type, let's just have .get_config() itself populate
output_types. This way we are isolated from encoder->type, which won't
be useable for this purpose anyway soon (at least for DDI encoders).
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Starting from version 204 VBT can specify the max TMDS clock we are
allowed to use with HDMI ports. Parse that information and take it
into account when filtering modes and computing a crtc state.
Also take the opportunity to sort the platform check if ladder
from new to old.
v2: Add defines for the values into intel_vbt_defs.h (Jani)
Don't fall back to 0 silently for unknown values (Jani)
Skip the debug print for the 0 case (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030145702.23662-1-ville.syrjala@linux.intel.com
Move the crtc state related 12bpc checks into hdmi_12bpc_possible()
since that one already examines other parts of the crtc state.
Note that we can drop the !force_dvi check since
crtc_state->has_hdmi_sink already accounts for that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026151405.30710-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
DP dongles may signal downstream HPD via short HPD pulses. Setting the
sink to DPMS off apparently kills the downstream HPD (at least on my
DP->VGA dongle), so skip the DPMS off for such dongles when we turn
off the port.
v2: Deal with DDI as well by moving the check into
intel_dp_sink_dpms() (Dhinakaran)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Pablo <pablodebiase@nanalysis.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103472
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99114
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027094523.9317-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Call the DDI .pre_pll_enable() hook from the MST code so that BXT gets
the correct lane latency optimal setting applied. And we obviously need
to compute the correct value, and read it out to keep the state checker
happy.
While at it drop the useless 'encoder' parameter to
bxt_ddi_phy_calc_lane_lat_optim_mask()
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027134348.31190-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Kasan spotted
[IGT] gem_tiled_pread_pwrite: exiting, ret=0
==================================================================
BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182
CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1
Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017
Workqueue: events __i915_gem_free_work [i915]
Call Trace:
dump_stack+0x68/0xa0
print_address_description+0x78/0x290
? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
kasan_report+0x23d/0x350
__asan_report_load8_noabort+0x19/0x20
__i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
? i915_gem_object_truncate+0x100/0x100 [i915]
? lock_acquire+0x380/0x380
__i915_gem_object_put_pages+0x30d/0x530 [i915]
__i915_gem_free_objects+0x551/0xbd0 [i915]
? lock_acquire+0x13e/0x380
__i915_gem_free_work+0x4e/0x70 [i915]
process_one_work+0x6f6/0x1590
? pwq_dec_nr_in_flight+0x2b0/0x2b0
worker_thread+0xe6/0xe90
? pci_mmcfg_check_reserved+0x110/0x110
kthread+0x309/0x410
? process_one_work+0x1590/0x1590
? kthread_create_on_node+0xb0/0xb0
ret_from_fork+0x27/0x40
Allocated by task 1801:
save_stack_trace+0x1b/0x20
kasan_kmalloc+0xee/0x190
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0xdc/0x2e0
radix_tree_node_alloc.constprop.12+0x48/0x330
__radix_tree_create+0x274/0x480
__radix_tree_insert+0xa2/0x610
i915_gem_object_get_sg+0x224/0x670 [i915]
i915_gem_object_get_page+0xb5/0x1c0 [i915]
i915_gem_pread_ioctl+0x822/0xf60 [i915]
drm_ioctl_kernel+0x13f/0x1c0
drm_ioctl+0x6cf/0x980
do_vfs_ioctl+0x184/0xf30
SyS_ioctl+0x41/0x70
entry_SYSCALL_64_fastpath+0x1c/0xb1
Freed by task 37:
save_stack_trace+0x1b/0x20
kasan_slab_free+0xaf/0x190
kmem_cache_free+0xbf/0x340
radix_tree_node_rcu_free+0x79/0x90
rcu_process_callbacks+0x46d/0xf40
__do_softirq+0x21c/0x8d3
The buggy address belongs to the object at ffff8801359da0f0
which belongs to the cache radix_tree_node of size 576
The buggy address is located 544 bytes inside of
576-byte region [ffff8801359da0f0, ffff8801359da330)
The buggy address belongs to the page:
page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x8000000000008100(slab|head)
raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011
raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
^
ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
which looks like the slab containing the radixtree iter was freed as we
traversed the tree, taking the rcu read lock across the loop should
prevent that (deferring all the frees until the end).
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Fixes: d1b48c1e71 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-2-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Kasan spotted
[IGT] gem_tiled_pread_pwrite: exiting, ret=0
==================================================================
BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182
CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1
Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017
Workqueue: events __i915_gem_free_work [i915]
Call Trace:
dump_stack+0x68/0xa0
print_address_description+0x78/0x290
? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
kasan_report+0x23d/0x350
__asan_report_load8_noabort+0x19/0x20
__i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
? i915_gem_object_truncate+0x100/0x100 [i915]
? lock_acquire+0x380/0x380
__i915_gem_object_put_pages+0x30d/0x530 [i915]
__i915_gem_free_objects+0x551/0xbd0 [i915]
? lock_acquire+0x13e/0x380
__i915_gem_free_work+0x4e/0x70 [i915]
process_one_work+0x6f6/0x1590
? pwq_dec_nr_in_flight+0x2b0/0x2b0
worker_thread+0xe6/0xe90
? pci_mmcfg_check_reserved+0x110/0x110
kthread+0x309/0x410
? process_one_work+0x1590/0x1590
? kthread_create_on_node+0xb0/0xb0
ret_from_fork+0x27/0x40
Allocated by task 1801:
save_stack_trace+0x1b/0x20
kasan_kmalloc+0xee/0x190
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0xdc/0x2e0
radix_tree_node_alloc.constprop.12+0x48/0x330
__radix_tree_create+0x274/0x480
__radix_tree_insert+0xa2/0x610
i915_gem_object_get_sg+0x224/0x670 [i915]
i915_gem_object_get_page+0xb5/0x1c0 [i915]
i915_gem_pread_ioctl+0x822/0xf60 [i915]
drm_ioctl_kernel+0x13f/0x1c0
drm_ioctl+0x6cf/0x980
do_vfs_ioctl+0x184/0xf30
SyS_ioctl+0x41/0x70
entry_SYSCALL_64_fastpath+0x1c/0xb1
Freed by task 37:
save_stack_trace+0x1b/0x20
kasan_slab_free+0xaf/0x190
kmem_cache_free+0xbf/0x340
radix_tree_node_rcu_free+0x79/0x90
rcu_process_callbacks+0x46d/0xf40
__do_softirq+0x21c/0x8d3
The buggy address belongs to the object at ffff8801359da0f0
which belongs to the cache radix_tree_node of size 576
The buggy address is located 544 bytes inside of
576-byte region [ffff8801359da0f0, ffff8801359da330)
The buggy address belongs to the page:
page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x8000000000008100(slab|head)
raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011
raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
^
ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
which looks like the slab containing the radixtree iter was freed as we
traversed the tree, taking the rcu read lock across the loop should
prevent that (deferring all the frees until the end).
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Fixes: 96d7763452 ("drm/i915: Use a radixtree for random access to the object's backing storage")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
An interesting snippet from Sandybridge's prm:
"Although a Ring Buffer can be enabled in the non-empty state, it must
not be disabled unless it is empty. Attempting to disable a Ring Buffer
in the non-empty state is UNDEFINED."
Let's avoid the undefined behaviour as we disable the rings prior to
reset and resume.
v2: Tell HEAD to catch up to TAIL (empty ring) first, then reset both to
0 (supposedly while stopped).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027094311.30380-1-chris@chris-wilson.co.uk
Per my reading of the eDP spec, DP_DPCD_DISPLAY_CONTROL_CAPABLE bit in
DP_EDP_CONFIGURATION_CAP should be set if the eDP display control
registers starting at offset DP_EDP_DPCD_REV are "enabled". Currently we
check the bit before reading the registers, and DP_EDP_DPCD_REV is the
only way to detect eDP revision.
Turns out there are (likely buggy) displays that require eDP 1.4+
features, such as supported link rates and link rate select, but do not
have the bit set. Read the display control registers
unconditionally. They are supposed to read zero anyway if they are not
supported, so there should be no harm in this.
This fixes the referenced bug by enabling the eDP version check, and
thus reading of the supported link rates. The panel in question has 0 in
DP_MAX_LINK_RATE which is only supported in eDP 1.4+. Without the
supported link rates method we default to RBR which is insufficient for
the panel native mode. As a curiosity, the panel also has a bogus value
of 0x12 in DP_EDP_DPCD_REV, but that passes our check for >= DP_EDP_14
(which is 0x03).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103400
Reported-and-tested-by: Nicolas P. <issun.artiste@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026142932.17737-1-jani.nikula@intel.com
The watermarks it should calculate against are the old optimal watermarks.
The currently active crtc watermarks are pure fiction, and are invalid in
case of a nonblocking modeset, page flip enabling/disabling planes or any
other reason.
When the crtc is disabled or during a modeset the intermediate watermarks
don't need to be programmed separately, and could be directly assigned
to the optimal watermarks.
Changes since v1:
- Use intel_atomic_get_old_crtc_state. (ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-2-maarten.lankhorst@linux.intel.com
[mlankhorst: Add cc stable and bugzilla link, since previous patch doesn't fix issue by itself]
Cc: stable@vger.kernel.org #v4.8+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373
The original intent was to preserve watermarks as much as possible
in intel_pipe_wm.raw_wm, and put the validated ones in intel_pipe_wm.wm.
It seems this approach is insufficient and we don't always preserve
the raw watermarks, so just use the atomic iterator we're already using
to get a const pointer to all bound planes on the crtc.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org #v4.8+
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-1-maarten.lankhorst@linux.intel.com
Recently W=1 on gcc-7.2 (-Wunused-const-variable) caught a regression
that had been lurking for 6 months, so lets try enabling the full set of
warnings for CI builds. This means more patches will be rejected early
that contain trivial and sometimes not so trivial bugs. However, our
code does not yet compile cleanly with W=1, so we have to apply a filter
to the set of warnings until we can eliminate the mistakes. It also
means that developers will have to be running the full gamut of gcc to
ensure that as warnings come and go with gcc updates, we have the CI
build prepared.
v2: Use fine-grained -Wno overrides. Inside the makefile, we can
specify CFLAGS on a per-object level, which allows us to limit the scope
of any particular warning override.
v3: Place per-file overrides after the main enabling block.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024181547.27889-1-chris@chris-wilson.co.uk
Acked-by: Jani Nikula <jani.nikula@intel.com>
Knowing the RING_MODE flags is useful for checking the state of the
engine, such as whether the CS is idle after trying to stop the engines
before reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026115048.20144-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
