AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
901,789 Commits 1 Branch 0 Tags 2 GiB
fcf4638075
Commit Graph

182 Commits

Author SHA1 Message Date
Lyude Paul
fcf4638075 drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checks 
DisplayPort specifications are fun. For a while, it's been really
unclear to us what available_pbn actually does. There's a somewhat vague
explanation in the DisplayPort spec (starting from 1.2) that partially
explains it:

  The minimum payload bandwidth number supported by the path. Each node
  updates this number with its available payload bandwidth number if its
  payload bandwidth number is less than that in the Message Transaction
  reply.

So, it sounds like available_pbn represents the smallest link rate in
use between the source and the branch device. Cool, so full_pbn is just
the highest possible PBN that the branch device supports right?

Well, we assumed that for quite a while until Sean Paul noticed that on
some MST hubs, available_pbn will actually get set to 0 whenever there's
any active payloads on the respective branch device. This caused quite a
bit of confusion since clearing the payload ID table would end up fixing
the available_pbn value.

So, we just went with that until commit cd82d82cbc ("drm/dp_mst: Add
branch bandwidth validation to MST atomic check") started breaking
people's setups due to us getting erroneous available_pbn values. So, we
did some more digging and got confused until we finally looked at the
definition for full_pbn:

  The bandwidth of the link at the trained link rate and lane count
  between the DP Source device and the DP Sink device with no time slots
  allocated to VC Payloads, represented as a Payload Bandwidth Number. As
  with the Available_Payload_Bandwidth_Number, this number is determined
  by the link with the lowest lane count and link rate.

That's what we get for not reading specs closely enough, hehe. So, since
full_pbn is definitely what we want for doing bandwidth restriction
checks - let's start using that instead and ignore available_pbn
entirely.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: cd82d82cbc ("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-3-lyude@redhat.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
 2020-03-12 19:07:24 -04:00
Lyude Paul
b2feb1d6d3 drm/dp_mst: Rename drm_dp_mst_is_dp_mst_end_device() to be less redundant 
It's already prefixed by dp_mst, so we don't really need to repeat
ourselves here. One of the changes I should have picked up originally
when reviewing MST DSC support.

There should be no functional changes here

Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Sean Paul <seanpaul@google.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-2-lyude@redhat.com
 2020-03-12 19:07:19 -04:00
Dave Airlie
984f0103fc Fixes for v5.6: 
- Revert allow_fb_modifiers in sun4i, as it causes a regression for DE2 and DE3.
 - Fix null pointer deref in drm_dp_mst_process_up_req().
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAl49Kh8ACgkQ/lWMcqZw
 E8P6rhAAsNKEdG7iZTnqrZzqMLkNdaYdwnAMSIycCSc26UW1xbNAURBWOlxFIyPA
 Jz2eJorXdAZfSzmRIDWV2TetpRGQB7MH+9o4cgG/oTbElOOppKb6S4r86JqYLJrO
 A0NM5juJG/+K5J0uO72ya8HiLqmCaWHl8NMXLe//fhvFYPHO+lFAYzLJ+7tTwDij
 0jNMIH/svVw/HI82jKNeAK/BzIz/POJCjOD5kPEAC9E81KVU8MUlpVEIM3cXaq0w
 wXeTf+uoI83GMik4ZoyAUiUNe3L1vSqoZWKIZESjOGIIvZwHyUgcdmRJwFktu5Qq
 ARqxZhZm4pB/RzN+YEwuSrtS/+gwJzROZFp8HaTIajghed9FT8CI3mnuPS26nnmB
 s+GKg12o/Sgr1uZWyk6ckl42hUqAFgk/H+RFLmW60nC/GtLlZkd1JVIfoA0RjarR
 Ms9RAKL75p4TySncM2vlcZ9GUWHkphEqv9mpm8LLYzAj4yydX6rvGd/QkE+VINyv
 cquhjYrwQU6bojt9kM6Tce1KchYLCt7DTHiXAztnYF8IJG3Ys4Z+xEkp2tM2fE0H
 m++A0GE8eLN5/O00j6relDWagcDTJzt5qjDFIYIiRC2y5EmMdbu1wvOW7sW0LF4l
 1bEuSaZDKfpnlJ3IfqmaWQz7i1553zFmahdfblBIX3hoVqGC6tY=
 =VCDX
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2020-02-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Fixes for v5.6:
- Revert allow_fb_modifiers in sun4i, as it causes a regression for DE2 and DE3.
- Fix null pointer deref in drm_dp_mst_process_up_req().

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/672810c3-4212-0a46-337b-2cb855573fd2@linux.intel.com
 2020-02-14 12:53:00 +10:00
José Roberto de Souza
8ccb5bf761 drm/mst: Fix possible NULL pointer dereference in drm_dp_mst_process_up_req() 
According to DP specification, DP_SINK_EVENT_NOTIFY is also a
broadcast message but as this function only handles
DP_CONNECTION_STATUS_NOTIFY I will only make the static
analyzer that caught this issue happy by not calling
drm_dp_get_mst_branch_device_by_guid() with a NULL guid, causing
drm_dp_mst_process_up_req() to return in the "if (!mstb)" right
bellow.

Fixes: 9408cc94eb ("drm/dp_mst: Handle UP requests asynchronously")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
[added cc to stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129232448.84704-1-jose.souza@intel.com
 2020-01-30 16:56:50 -05:00
Linus Torvalds
9f68e3655a drm pull for 5.6-rc1 
uapi:
 - dma-buf heaps added (and fixed)
 - command line add support for panel oreientation
 - command line allow overriding penguin count
 
 drm:
 - mipi dsi definition updates
 - lockdep annotations for dma_resv
 - remove dma-buf kmap/kunmap support
 - constify fb_ops in all fbdev drivers
 - MST fix for daisy chained hotplug-
 - CTA-861-G modes with VIC >= 193 added
 - fix drm_panel_of_backlight export
 - LVDS decoder support
 - more device based logging support
 - scanline alighment for dumb buffers
 - MST DSC helpers
 
 scheduler:
 - documentation fixes
 - job distribution improvements
 
 panel:
 - Logic PD type 28 panel support
 - Jimax8729d MIPI-DSI
 - igenic JZ4770
 - generic DSI devicetree bindings
 - sony acx424AKP panel
 - Leadtek LTK500HD1829
 - xinpeng XPP055C272
 - AUO B116XAK01
 - GiantPlus GPM940B0
 - BOE NV140FHM-N49
 - Satoz SAT050AT40H12R2
 - Sharp LS020B1DD01D panels.
 
 ttm:
 - use blocking WW lock
 
 i915:
 - hw/uapi state separation
 - Lock annotation improvements
 - selftest improvements
 - ICL/TGL DSI VDSC support
 - VBT parsing improvments
 - Display refactoring
 - DSI updates + fixes
 - HDCP 2.2 for CFL
 - CML PCI ID fixes
 - GLK+ fbc fix
 - PSR fixes
 - GEN/GT refactor improvments
 - DP MST fixes
 - switch context id alloc to xarray
 - workaround updates
 - LMEM debugfs support
 - tiled monitor fixes
 - ICL+ clock gating programming removed
 - DP MST disable sequence fixed
 - LMEM discontiguous object maps
 - prefaulting for discontiguous objects
 - use LMEM for dumb buffers if possible
 - add LMEM mmap support
 
 amdgpu:
 - enable sync object timelines for vulkan
 - MST atomic routines
 - enable MST DSC support
 - add DMCUB display microengine support
 - DC OEM i2c support
 - Renoir DC fixes
 - Initial HDCP 2.x support
 - BACO support for Arcturus
 - Use BACO for runtime PM power save
 - gfxoff on navi10
 - gfx10 golden updates and fixes
 - DCN support on POWER
 - GFXOFF for raven1 refresh
 - MM engine idle handlers cleanup
 - 10bpc EDP panel fixes
 - renoir watermark fixes
 - SR-IOV fixes
 - Arcturus VCN fixes
 - GDDR6 training fixes
 - freesync fixes
 - Pollock support
 
 amdkfd:
 - unify more codepath with amdgpu
 - use KIQ to setup HIQ rather than MMIO
 
 radeon:
 - fix vma fault handler race
 - PPC DMA fix
 - register check fixes for r100/r200
 
 nouveau:
 - mmap_sem vs dma_resv fix
 - rewrite the ACR secure boot code for Turing
 - TU10x graphics engine support (TU11x pending)
 - Page kind mapping for turing
 - 10-bit LUT support
 - GP10B Tegra fixes
 - HD audio regression fix
 
 hisilicon/hibmc:
 - use generic fbdev code and helpers
 
 rockchip:
 - dsi/px30 support
 
 virtio:
 - fb damage support
 - static some functions
 
 vc4:
 - use dma_resv lock wrappers
 
 msm:
 - use dma_resv lock wrappers
 - sc7180 display + DSI support
 - a618 support
 - UBWC support improvements
 
 vmwgfx:
 - updates + new logging uapi
 
 exynos:
 - enable/disable callback cleanups
 
 etnaviv:
 - use dma_resv lock wrappers
 
 atmel-hlcdc:
 - clock fixes
 
 mediatek:
 - cmdq support
 - non-smooth cursor fixes
 - ctm property support
 
 sun4i:
 - suspend support
 - A64 mipi dsi support
 
 rcar-du:
 - Color management module support
 - LVDS encoder dual-link support
 - R8A77980 support
 
 analogic:
 - add support for an6345
 
 ast:
 - atomic modeset support
 - primary plane garbage fix
 
 arcgpu:
 - fixes for fourcc handling
 
 tegra:
 - minor fixes and improvments
 
 mcde:
 - vblank support
 
 meson:
 - OSD1 plane AFBC commit
 
 gma500:
 - add pageflip support
 - reomve global drm_dev
 
 komeda:
 - tweak debugfs output
 - d32 support
 - runtime PM suppotr
 
 udl:
 - use generic shmem helpers
 - cleanup and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJeMm6RAAoJEAx081l5xIa+vN8P/0j4jEOv+KIinAhoH+LG3EpD
 m2TUuu5OQIoBrcCoWOgFBk3wqYpw6PdMBdkXh+5sE5lfeBynp8oC3Bin+QsHJE05
 eGBpZtHe+70MQb0Eha+Aic0hchvBKzRnq6i0MYSIHn6afs76dLmF8knTjycxrvV5
 Xu1Z3WDmjzqgWF9ja5JCD6fby11seP5RrwObYKVikO35QQyJJwGSGKgu5rq/pByK
 /n0PCnCOINuL0Lz6J9qexdh/0/XYFQilRC31GJNlKbDSFuECF0GOEzEE/xUBW/pI
 dLh2YwIIygm18Gar9PgvMwXJn3BfzQ0qEJsf+HlQeNw9iLgbHpp2AsTxHTE87OGe
 R/y85taW3jGjPsNOKZOeLpvg/Ro8l8ZipLApvDCG2O22DThg/cd6NDjZxl1FJfRH
 acDG/JdgPo5MbdRAH/cM1WuFS9gEM+0BeSQ5gCjtPakF+X4Vz+ABFDLMRJoaejkJ
 q8DG32TQXELQx0RMghsqK7YCWGfl+2alA1u9w6TgJh9Rq4iVckvpDeqAZnK1Adkc
 87g957Tl0n6FA4wJj/t5jrceiLRMJAm/rBK+R3GZNfWrgx4bHbCmb4fZDZsrFzph
 nbAjNJ5kOchrFCaRR47ULby6+Q14MAFbkWq4Crfu4YDdzUkTPpep6pi2GIe8w0rV
 P0hdYOYJf6LUda0utuQX
 =oFrI
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Davbe Airlie:
 "This is the main pull request for graphics for 5.6. Usual selection of
  changes all over.

  I've got one outstanding vmwgfx pull that touches mm so kept it
  separate until after all of this lands. I'll try and get it to you
  soon after this, but it might be early next week (nothing wrong with
  code, just my schedule is messy)

  This also hits a lot of fbdev drivers with some cleanups.

  Other notables:
   - vulkan timeline semaphore support added to syncobjs
   - nouveau turing secureboot/graphics support
   - Displayport MST display stream compression support

  Detailed summary:

  uapi:
   - dma-buf heaps added (and fixed)
   - command line add support for panel oreientation
   - command line allow overriding penguin count

  drm:
   - mipi dsi definition updates
   - lockdep annotations for dma_resv
   - remove dma-buf kmap/kunmap support
   - constify fb_ops in all fbdev drivers
   - MST fix for daisy chained hotplug-
   - CTA-861-G modes with VIC >= 193 added
   - fix drm_panel_of_backlight export
   - LVDS decoder support
   - more device based logging support
   - scanline alighment for dumb buffers
   - MST DSC helpers

  scheduler:
   - documentation fixes
   - job distribution improvements

  panel:
   - Logic PD type 28 panel support
   - Jimax8729d MIPI-DSI
   - igenic JZ4770
   - generic DSI devicetree bindings
   - sony acx424AKP panel
   - Leadtek LTK500HD1829
   - xinpeng XPP055C272
   - AUO B116XAK01
   - GiantPlus GPM940B0
   - BOE NV140FHM-N49
   - Satoz SAT050AT40H12R2
   - Sharp LS020B1DD01D panels.

  ttm:
   - use blocking WW lock

  i915:
   - hw/uapi state separation
   - Lock annotation improvements
   - selftest improvements
   - ICL/TGL DSI VDSC support
   - VBT parsing improvments
   - Display refactoring
   - DSI updates + fixes
   - HDCP 2.2 for CFL
   - CML PCI ID fixes
   - GLK+ fbc fix
   - PSR fixes
   - GEN/GT refactor improvments
   - DP MST fixes
   - switch context id alloc to xarray
   - workaround updates
   - LMEM debugfs support
   - tiled monitor fixes
   - ICL+ clock gating programming removed
   - DP MST disable sequence fixed
   - LMEM discontiguous object maps
   - prefaulting for discontiguous objects
   - use LMEM for dumb buffers if possible
   - add LMEM mmap support

  amdgpu:
   - enable sync object timelines for vulkan
   - MST atomic routines
   - enable MST DSC support
   - add DMCUB display microengine support
   - DC OEM i2c support
   - Renoir DC fixes
   - Initial HDCP 2.x support
   - BACO support for Arcturus
   - Use BACO for runtime PM power save
   - gfxoff on navi10
   - gfx10 golden updates and fixes
   - DCN support on POWER
   - GFXOFF for raven1 refresh
   - MM engine idle handlers cleanup
   - 10bpc EDP panel fixes
   - renoir watermark fixes
   - SR-IOV fixes
   - Arcturus VCN fixes
   - GDDR6 training fixes
   - freesync fixes
   - Pollock support

  amdkfd:
   - unify more codepath with amdgpu
   - use KIQ to setup HIQ rather than MMIO

  radeon:
   - fix vma fault handler race
   - PPC DMA fix
   - register check fixes for r100/r200

  nouveau:
   - mmap_sem vs dma_resv fix
   - rewrite the ACR secure boot code for Turing
   - TU10x graphics engine support (TU11x pending)
   - Page kind mapping for turing
   - 10-bit LUT support
   - GP10B Tegra fixes
   - HD audio regression fix

  hisilicon/hibmc:
   - use generic fbdev code and helpers

  rockchip:
   - dsi/px30 support

  virtio:
   - fb damage support
   - static some functions

  vc4:
   - use dma_resv lock wrappers

  msm:
   - use dma_resv lock wrappers
   - sc7180 display + DSI support
   - a618 support
   - UBWC support improvements

  vmwgfx:
   - updates + new logging uapi

  exynos:
   - enable/disable callback cleanups

  etnaviv:
   - use dma_resv lock wrappers

  atmel-hlcdc:
   - clock fixes

  mediatek:
   - cmdq support
   - non-smooth cursor fixes
   - ctm property support

  sun4i:
   - suspend support
   - A64 mipi dsi support

  rcar-du:
   - Color management module support
   - LVDS encoder dual-link support
   - R8A77980 support

  analogic:
   - add support for an6345

  ast:
   - atomic modeset support
   - primary plane garbage fix

  arcgpu:
   - fixes for fourcc handling

  tegra:
   - minor fixes and improvments

  mcde:
   - vblank support

  meson:
   - OSD1 plane AFBC commit

  gma500:
   - add pageflip support
   - reomve global drm_dev

  komeda:
   - tweak debugfs output
   - d32 support
   - runtime PM suppotr

  udl:
   - use generic shmem helpers
   - cleanup and fixes"

* tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits)
  drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing
  drm/nouveau/acr: return error when registering LSF if ACR not supported
  drm/nouveau/disp/gv100-: not all channel types support reporting error codes
  drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
  drm/nouveau: support synchronous pushbuf submission
  drm/nouveau: signal pending fences when channel has been killed
  drm/nouveau: reject attempts to submit to dead channels
  drm/nouveau: zero vma pointer even if we only unreference it rather than free
  drm/nouveau: Add HD-audio component notifier support
  drm/nouveau: fix build error without CONFIG_IOMMU_API
  drm/nouveau/kms/nv04: remove set but not used variable 'width'
  drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector'
  drm/nouveau/mmu: fix comptag memory leak
  drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc
  drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping
  drm/exynos: Rename Exynos to lowercase
  drm/exynos: change callback names
  drm/mst: Don't do atomic checks over disabled managers
  drm/amdgpu: add the lost mutex_init back
  drm/amd/display: skip opp blank or unblank if test pattern enabled
  ...
 2020-01-30 08:04:01 -08:00
Dave Airlie
3d4743131b Linux 5.5-rc7 
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl4k7i8eHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvk0IAKRenVOdiudY77SQ
 VZjsteyrYTTQtPPv494ToIRjR0XQ+gYp8vyWzXTUC5Nm9Y9U3VzDqUPUjWszrSXE
 6mU+tzcMc9qwuUxnIFn8zfg64ygw+37sn/w3xqeH4QmF9Z5Wl3EX3SdXTs7jp3RS
 VxiztkUNI5ZBV2GDtla5K/9qLPqCQnUYXIiyi5lAtBtiitZDVXFp7dy7hMgEiaEO
 +78K5Kh3xlt5ndDsBFOlwIb2Oof3KL7bBXntdbSBc/bjol6IRvAgln48HWCv59G2
 jzAp2tj2KobX9GRAEPj+v4TQZEW0SXDNDi8MgQsM+3DYVCTmANsv57CBKRuf01+F
 nB1kAys=
 =zSnJ
 -----END PGP SIGNATURE-----

Backmerge v5.5-rc7 into drm-next

msm needs 5.5-rc4, go to the latest.

Signed-off-by: Dave Airlie <airlied@redhat.com>
 2020-01-20 11:42:57 +10:00
Wayne Lin
db1a079569 drm/dp_mst: Handle SST-only branch device case 
[Why]
While handling LINK_ADDRESS reply, current code expects a peer device
can handle sideband message once the peer device type is reported as
DP_PEER_DEVICE_MST_BRANCHING. However, when the connected device is
a SST branch case, it can't handle the sideband message(MST_CAP=0 in
DPCD 00021h).

Current code will try to send LINK_ADDRESS to SST branch device and end
up with message timeout and monitor can't display normally. As the
result of that, we should take SST branch device into account.

[How]
According to DP 1.4 spec, we can use Peer_Device_Type as
DP_PEER_DEVICE_MST_BRANCHING and Message_Capability_Status as 0 to
indicate peer device as a SST-only branch device.

Fix following:
- Add the function drm_dp_mst_is_dp_mst_end_device() to decide whether a
peer device connected to a DFP is mst end device. Which also indicates
if the peer device is capable of handling message or not.
- Take SST-only branch device case into account in
drm_dp_port_set_pdt() and add a new parameter 'new_mcs'. Take sst branch
device case as the same case as DP_PEER_DEVICE_DP_LEGACY_CONV and
DP_PEER_DEVICE_SST_SINK. All original handling logics remain.
- Take SST-only branch device case into account in
drm_dp_mst_port_add_connector().
- Fix some parts in drm_dp_mst_handle_link_address_port() to have SST
branch device case into consideration.
- Fix the arguments of drm_dp_port_set_pdt() in
drm_dp_mst_handle_conn_stat().
- Have SST branch device also report
connector_status_connected when the ddps is true
in drm_dp_mst_detect_port()
- Fix the arguments of drm_dp_port_set_pdt() in
drm_dp_delayed_destroy_port()

Changes since v1:(https://patchwork.kernel.org/patch/11323079/)
* Squash previous patch into one patch and merge the commit message here.
* Combine the if statements mentioned in comments

Fixes: c485e2c97d ("drm/dp_mst: Refactor pdt setup/teardown, add more locking")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117060350.26358-2-Wayne.Lin@amd.com
 2020-01-17 19:17:00 -05:00
José Roberto de Souza
7b19914383 drm/mst: Don't do atomic checks over disabled managers 
When a main MST port is disconnected drivers should call
drm_dp_mst_topology_mgr_set_mst() disabling the MST manager, this
function will set manager mst_primary to NULL and it will cause the
crash bellow on the next atomic check when trying to access
mst_primary->port.

As there is no use in running checks over managers that are not
active this patch will skip it.

[  305.616450] [drm:drm_dp_mst_atomic_check] [MST PORT:00000000cc2049e9] releases all VCPI slots
[  305.625085] [drm:drm_dp_mst_atomic_check] [MST PORT:00000000020ab43e] releases all VCPI slots
[  305.633729] [drm:drm_dp_mst_atomic_check] [MST MGR:00000000cdd467d4] mst state 00000000b67672eb VCPI avail=63 used=0
[  305.644405] BUG: kernel NULL pointer dereference, address: 0000000000000030
[  305.651448] #PF: supervisor read access in kernel mode
[  305.656640] #PF: error_code(0x0000) - not-present page
[  305.661807] PGD 0 P4D 0
[  305.664396] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  305.668789] CPU: 3 PID: 183 Comm: kworker/3:2 Not tainted 5.5.0-rc6+ #1404
[  305.675703] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3201.A00.1905140358 05/14/2019
[  305.689425] Workqueue: events drm_dp_delayed_destroy_work
[  305.694874] RIP: 0010:drm_dp_mst_atomic_check+0x138/0x2c0
[  305.700306] Code: 00 00 00 41 29 d9 41 89 d8 4c 89 fa 4c 89 f1 48 c7 c6 b0 b1 34 82 bf 10 00 00 00 45 31 ed e8 3f 99 02 00 4d 8b bf 80 04 00 00 <49> 8b 47 30 49 8d 5f 30 4c 8d 60 e8 48 39 c3 74 35 49 8b 7c 24 28
[  305.719169] RSP: 0018:ffffc90001687b58 EFLAGS: 00010246
[  305.724434] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000
[  305.731611] RDX: 0000000000000000 RSI: ffff88849fba8cb8 RDI: 00000000ffffffff
[  305.738785] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
[  305.745962] R10: ffffc900016879a0 R11: ffffc900016879a5 R12: 0000000000000000
[  305.753139] R13: 0000000000000000 R14: ffff8884905c9bc0 R15: 0000000000000000
[  305.760315] FS:  0000000000000000(0000) GS:ffff88849fb80000(0000) knlGS:0000000000000000
[  305.768452] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  305.774263] CR2: 0000000000000030 CR3: 0000000005610006 CR4: 0000000000760ee0
[  305.781441] PKRU: 55555554
[  305.784228] Call Trace:
[  305.786739]  intel_atomic_check+0xb2e/0x2560 [i915]
[  305.791678]  ? printk+0x53/0x6a
[  305.794856]  ? drm_atomic_check_only+0x3e/0x810
[  305.799417]  ? __drm_dbg+0x82/0x90
[  305.802848]  drm_atomic_check_only+0x56a/0x810
[  305.807322]  drm_atomic_commit+0xe/0x50
[  305.811185]  drm_client_modeset_commit_atomic+0x1e2/0x250
[  305.816619]  drm_client_modeset_commit_force+0x4d/0x180
[  305.821921]  drm_fb_helper_restore_fbdev_mode_unlocked+0x46/0xa0
[  305.827963]  drm_fb_helper_set_par+0x2b/0x40
[  305.832265]  drm_fb_helper_hotplug_event.part.0+0xb2/0xd0
[  305.837755]  drm_kms_helper_hotplug_event+0x21/0x30
[  305.842694]  process_one_work+0x25b/0x5b0
[  305.846735]  worker_thread+0x4b/0x3b0
[  305.850439]  kthread+0x100/0x140
[  305.853690]  ? process_one_work+0x5b0/0x5b0
[  305.857901]  ? kthread_park+0x80/0x80
[  305.861588]  ret_from_fork+0x24/0x50
[  305.865202] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 btusb btrtl btbcm btintel bluetooth prime_numbers snd_hda_intel snd_intel_dspcfg snd_hda_codec e1000e snd_hwdep snd_hda_core thunderbolt mei_hdcp mei_me asix cdc_ether x86_pkg_temp_thermal r8152 mei coretemp usbnet snd_pcm mii crct10dif_pclmul ptp crc32_pclmul ecdh_generic ghash_clmulni_intel pps_core ecc i2c_i801 intel_lpss_pci
[  305.903096] CR2: 0000000000000030
[  305.906431] ---[ end trace 70ee364eed801cb0 ]---
[  305.940816] RIP: 0010:drm_dp_mst_atomic_check+0x138/0x2c0
[  305.946261] Code: 00 00 00 41 29 d9 41 89 d8 4c 89 fa 4c 89 f1 48 c7 c6 b0 b1 34 82 bf 10 00 00 00 45 31 ed e8 3f 99 02 00 4d 8b bf 80 04 00 00 <49> 8b 47 30 49 8d 5f 30 4c 8d 60 e8 48 39 c3 74 35 49 8b 7c 24 28
[  305.965125] RSP: 0018:ffffc90001687b58 EFLAGS: 00010246
[  305.970382] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000
[  305.977571] RDX: 0000000000000000 RSI: ffff88849fba8cb8 RDI: 00000000ffffffff
[  305.984747] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
[  305.991921] R10: ffffc900016879a0 R11: ffffc900016879a5 R12: 0000000000000000
[  305.999099] R13: 0000000000000000 R14: ffff8884905c9bc0 R15: 0000000000000000
[  306.006271] FS:  0000000000000000(0000) GS:ffff88849fb80000(0000) knlGS:0000000000000000
[  306.014407] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  306.020185] CR2: 0000000000000030 CR3: 000000048b3aa003 CR4: 0000000000760ee0
[  306.027404] PKRU: 55555554
[  306.030127] BUG: sleeping function called from invalid context at include/linux/percpu-rwsem.h:38
[  306.039049] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 183, name: kworker/3:2
[  306.047272] INFO: lockdep is turned off.
[  306.051217] irq event stamp: 77505
[  306.054647] hardirqs last  enabled at (77505): [<ffffffff81a0c147>] _raw_spin_unlock_irqrestore+0x47/0x60
[  306.064270] hardirqs last disabled at (77504): [<ffffffff81a0bedf>] _raw_spin_lock_irqsave+0xf/0x50
[  306.073404] softirqs last  enabled at (77402): [<ffffffff81e00389>] __do_softirq+0x389/0x47f
[  306.081885] softirqs last disabled at (77395): [<ffffffff810b83a9>] irq_exit+0xa9/0xc0
[  306.089859] CPU: 3 PID: 183 Comm: kworker/3:2 Tainted: G      D           5.5.0-rc6+ #1404
[  306.098167] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3201.A00.1905140358 05/14/2019
[  306.111882] Workqueue: events drm_dp_delayed_destroy_work
[  306.117314] Call Trace:
[  306.119780]  dump_stack+0x71/0xa0
[  306.123135]  ___might_sleep.cold+0xf7/0x10b
[  306.127399]  exit_signals+0x2b/0x360
[  306.131014]  do_exit+0xa7/0xc70
[  306.134189]  ? kthread+0x100/0x140
[  306.137615]  rewind_stack_do_exit+0x17/0x20

Fixes: cd82d82cbc ("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
 2020-01-17 16:04:19 -05:00
Wayne Lin
5a64967a2f drm/dp_mst: Have DP_Tx send one msg at a time 
[Why]
Noticed this while testing MST with the 4 ports MST hub from
StarTech.com. Sometimes can't light up monitors normally and get the
error message as 'sideband msg build failed'.

Look into aux transactions, found out that source sometimes will send
out another down request before receiving the down reply of the
previous down request. On the other hand, in drm_dp_get_one_sb_msg(),
current code doesn't handle the interleaved replies case. Hence, source
can't build up message completely and can't light up monitors.

[How]
For good compatibility, enforce source to send out one down request at a
time. Add a flag, is_waiting_for_dwn_reply, to determine if the source
can send out a down request immediately or not.

- Check the flag before calling process_single_down_tx_qlock to send out
a msg
- Set the flag when successfully send out a down request
- Clear the flag when successfully build up a down reply
- Clear the flag when find erros during sending out a down request
- Clear the flag when find errors during building up a down reply
- Clear the flag when timeout occurs during waiting for a down reply
- Use drm_dp_mst_kick_tx() to try to send another down request in queue
at the end of drm_dp_mst_wait_tx_reply() (attempt to send out messages
in queue when errors occur)

Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113093649.11755-1-Wayne.Lin@amd.com
 2020-01-15 17:01:21 -05:00
Wayne Lin
7617e9621b drm/dp_mst: clear time slots for ports invalid 
[Why]
When change the connection status in a MST topology, mst device
which detect the event will send out CONNECTION_STATUS_NOTIFY messgae.

e.g. src-mst-mst-sst => src-mst (unplug) mst-sst

Currently, under the above case of unplugging device, ports which have
been allocated payloads and are no longer in the topology still occupy
time slots and recorded in proposed_vcpi[] of topology manager.

If we don't clean up the proposed_vcpi[], when code flow goes to try to
update payload table by calling drm_dp_update_payload_part1(), we will
fail at checking port validation due to there are ports with proposed
time slots but no longer in the mst topology. As the result of that, we
will also stop updating the DPCD payload table of down stream port.

[How]
While handling the CONNECTION_STATUS_NOTIFY message, add a detection to
see if the event indicates that a device is unplugged to an output port.
If the detection is true, then iterrate over all proposed_vcpi[] to
see whether a port of the proposed_vcpi[] is still in the topology or
not. If the port is invalid, set its num_slots to 0.

Thereafter, when try to update payload table by calling
drm_dp_update_payload_part1(), we can successfully update the DPCD
payload table of down stream port and clear the proposed_vcpi[] to NULL.

Changes since v1:(https://patchwork.kernel.org/patch/11275801/)
* Invert the conditional to reduce the indenting

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
[removed cc for stable - there's too many patches this depends on for
this to backport cleanly]
Link: https://patchwork.freedesktop.org/patch/msgid/20200106102158.28261-1-Wayne.Lin@amd.com
 2020-01-14 13:57:24 -05:00
Alex Deucher
9edb435aed drm/dp_mst: fix documentation of drm_dp_mst_add_affected_dsc_crtcs 
the parameter is the mst manager, not the port.

Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
 2020-01-09 18:07:48 -05:00
David (Dingchen) Zhang
c908b1c4bb drm: add dp helper to initialize remote aux channel. 
[why]
We need to minimally initialize the remote aux channel, e.g. the
crc work struct of remote aux to dump the sink's DPRX CRCs in MST
setup.

[how]
Add helper that only initializes the crc work struct of the remote
aux, hooke crc work queue to 'drm_dp_aux_crc_work'. Then call this
helper in DP MST port initialization.
This, plus David Francis' patch [1], fix the issue of MST remote
aux DPCD CRCs read.

[1] https://patchwork.kernel.org/patch/11217941/

Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: David (Dingchen) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
 2020-01-09 18:07:48 -05:00
Mikita Lipski
8ec046716c drm/dp_mst: Add helper to trigger modeset on affected DSC MST CRTCs 
[why]
Whenever a connector on an MST network is changed or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stream did not change timing.

[how]
Adding helper to trigger modesets on MST DSC connectors
by setting mode_changed flag on CRTCs in the same topology
as affected connector

v2: use drm_dp_mst_dsc_aux_for_port function to verify
if the port is DSC capable

v3: - added _must_check attribute
    - removed topology manager check
    - fix typos and indentations

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
 2020-01-09 18:07:48 -05:00
Mikita Lipski
9e5b959036 drm/dp_mst: Rename drm_dp_mst_atomic_check_topology_state 
[why]
drm_dp_mst_atomic_check_topology_state() should be renamed
to reflect more specific type of check. Since it is verifying
payload allocation limit it should be renamed into
drm_dp_mst_atomic_check_vcpi_alloc_limit()

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
 2020-01-09 18:07:47 -05:00
Mikita Lipski
cd82d82cbc drm/dp_mst: Add branch bandwidth validation to MST atomic check 
[why]
Adding PBN attribute to drm_dp_vcpi_allocation structure to
keep track of how much bandwidth each Port requires.
Adding drm_dp_mst_atomic_check_bw_limit to verify that
state's bandwidth needs doesn't exceed available bandwidth.
The funtion is called in drm_dp_mst_atomic_check after
drm_dp_mst_atomic_check_topology_state to fully verify that
the proposed topology is supported.

v2: Fixing some typos and indenting
v3: Return correct error enums if no bw space available

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
 2020-01-09 18:07:47 -05:00
Mikita Lipski
8afb7e6afa drm/dp_mst: Add DSC enablement helpers to DRM 
Adding a helper function to be called by
drivers outside of DRM to enable DSC on
the MST ports.

Function is called to recalculate VCPI allocation
if DSC is enabled and raise the DSC flag to enable.
In case of disabling DSC the flag is set to false
and recalculation of VCPI slots is expected to be done
in encoder's atomic_check.

v2: squash separate functions into one and call it per
port
v3: Fix comment typos

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
 2020-01-09 18:07:47 -05:00
Mikita Lipski
1c6c1cb5af drm/dp_mst: Manually overwrite PBN divider for calculating timeslots 
[why]
For DSC case we cannot use topology manager's PBN divider
variable. The default divider does not take FEC into account.
Therefore the driver has to calculate its own divider based
on the link rate and lane count its handling, as it is hw specific.

[how]
Pass pbn_div as an argument, which is used if its more than
zero, otherwise default topology manager's pbn_div will be used.

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
 2020-01-09 18:07:47 -05:00
Mikita Lipski
5b03f9d868 drm/dp_mst: Add new quirk for Synaptics MST hubs 
Synaptics DP1.4 hubs (BRANCH_ID 0x90CC24) do not
support virtual DPCD registers, but do support DSC.
The DSC caps can be read from the physical aux,
like in SST DSC. These hubs have many different
DEVICE_IDs.  Add a new quirk to detect this case.

v2: Fix error when checking return of drm_dp_read_desc

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
 2020-01-09 18:07:46 -05:00
David Francis
c2bc1b6eab drm/dp_mst: Add helpers for MST DSC and virtual DPCD aux 
Add drm_dp_mst_dsc_aux_for_port. To enable DSC, the DSC_ENABLED
register might have to be written on the leaf port's DPCD,
its parent's DPCD, or the MST manager's DPCD. This function
finds the correct aux for the job.

As part of this, add drm_dp_mst_is_virtual_dpcd. Virtual DPCD
is a DP feature new in DP v1.4, which exposes certain DPCD
registers on virtual ports.

v2: Remember to unlock mutex on all paths
v3: Refactor to match coding style and increase brevity
v4: - Check DSC capable MST sink connected directly to the device.
    - Check branch's port_parent to be set

Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
 2020-01-09 18:07:46 -05:00
David Francis
b1dee9a716 drm/dp_mst: Fill branch->num_ports 
This field on drm_dp_mst_branch was never filled

It is initialized to zero when the port is kzallocced.
When a port is added to the list, increment num_ports,
and when a port is removed from the list, decrement num_ports.

v2: remember to decrement on port removal
v3: don't explicitly init to 0
v4: move decrement of num_ports to unlink_port function

Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
 2020-01-09 18:07:46 -05:00
David Francis
a3c2b0ffc0 drm/dp_mst: Parse FEC capability on MST ports 
As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating
if FEC can be supported up to that point in the MST network.

The bit is the first byte of the ENUM_PATH_RESOURCES ack reply,
bottom-most bit (refer to section 2.11.9.4 of DP standard,
v1.4)

That value is needed for FEC and DSC support

Store it on drm_dp_mst_port

Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
 2020-01-09 18:07:46 -05:00
David Francis
dc48529fb1 drm/dp_mst: Add PBN calculation for DSC modes 
With DSC, bpp can be fractional in multiples of 1/16.

Change drm_dp_calc_pbn_mode to reflect this, adding a new
parameter bool dsc. When this parameter is true, treat the
bpp parameter as having units not of bits per pixel, but
1/16 of a bit per pixel

v2: Don't add separate function for this
v3: In the equation divide bpp by 16 as it is expected
not to leave any remainder
v4: Added DSC test parameters for selftest

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
 2020-01-09 18:07:46 -05:00
Wayne Lin
c4e4fccc5d drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ 
[Why]
According to DP spec, it should shift left 4 digits for NO_STOP_BIT
in REMOTE_I2C_READ message. Not 5 digits.

In current code, NO_STOP_BIT is always set to zero which means I2C
master is always generating a I2C stop at the end of each I2C write
transaction while handling REMOTE_I2C_READ sideband message. This issue
might have the generated I2C signal not meeting the requirement. Take
random read in I2C for instance, I2C master should generate a repeat
start to start to read data after writing the read address. This issue
will cause the I2C master to generate a stop-start rather than a
re-start which is not expected in I2C random read.

[How]
Correct the shifting value of NO_STOP_BIT for DP_REMOTE_I2C_READ case in
drm_dp_encode_sideband_req().

Changes since v1:(https://patchwork.kernel.org/patch/11312667/)
* Add more descriptions in commit and cc to stable

Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200103055001.10287-1-Wayne.Lin@amd.com
 2020-01-03 16:56:23 -05:00
Daniel Vetter
6c56e8adc0 drm-misc-next for v5.6: 
UAPI Changes:
 - Add support for DMA-BUF HEAPS.
 
 Cross-subsystem Changes:
 - mipi dsi definition updates, pulled into drm-intel as well.
 - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
 - Remove support for dma-buf kmap/kunmap.
 - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
 
 Core Changes:
 - Small cleanups to ttm.
 - Fix SCDC definition.
 - Assorted cleanups to core.
 - Add todo to remove load/unload hooks, and use generic fbdev emulation.
 - Assorted documentation updates.
 - Use blocking ww lock in ttm fault handler.
 - Remove drm_fb_helper_fbdev_setup/teardown.
 - Warning fixes with W=1 for atomic.
 - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
 - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
 - Various kconfig indentation fixes in core and drivers.
 - Fix freeing transactions in dp-mst correctly.
 - Sean Paul is steping down as core maintainer. :-(
 - Add lockdep annotations for atomic locks vs dma-resv.
 - Prevent use-after-free for a bad job in drm_scheduler.
 - Fill out all block sizes in the P01x and P210 definitions.
 - Avoid division by zero in drm/rect, and fix bounds.
 - Add drm/rect selftests.
 - Add aspect ratio and alternate clocks for HDMI 4k modes.
 - Add todo for drm_framebuffer_funcs and fb_create cleanup.
 - Drop DRM_AUTH for prime import/export ioctls.
 - Clear DP-MST payload id tables downstream when initializating.
 - Fix for DSC throughput definition.
 - Add extra FEC definitions.
 - Fix fake offset in drm_gem_object_funs.mmap.
 - Stop using encoder->bridge in core directly
 - Handle bridge chaining slightly better.
 - Add backlight support to drm/panel, and use it in many panel drivers.
 - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
 
 Driver Changes:
 - Small fixes all over.
 - Fix documentation in vkms.
 - Fix mmap_sem vs dma_resv in nouveau.
 - Small cleanup in komeda.
 - Add page flip support in gma500 for psb/cdv.
 - Add ddc symlink in the connector sysfs directory for many drivers.
 - Add support for analogic an6345, and fix small bugs in it.
 - Add atomic modesetting support to ast.
 - Fix radeon fault handler VMA race.
 - Switch udl to use generic shmem helpers.
 - Unconditional vblank handling for mcde.
 - Miscellaneous fixes to mcde.
 - Tweak debug output from komeda using debugfs.
 - Add gamma and color transform support to komeda for DOU-IPS.
 - Add support for sony acx424AKP panel.
 - Various small cleanups to gma500.
 - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
 - Add support for Logic PD Type 28 panel.
 - Use drm_panel_* wrapper functions in exynos/tegra/msm.
 - Add devicetree bindings for generic DSI panels.
 - Don't include drm_pci.h directly in many drivers.
 - Add support for begin/end_cpu_access in udmabuf.
 - Stop using drm_get_pci_dev in gma500 and mga200.
 - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
 - Add devfreq thermal support to panfrost.
 - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
 - meson: Add support for OSD1 plane AFBC commit.
 - Stop displaying garbage when toggling ast primary plane on/off.
 - More cleanups and fixes to UDL.
 - Add D32 suport to komeda.
 - Remove globle copy of drm_dev in gma500.
 - Add support for Boe Himax8279d MIPI-DSI LCD panel.
 - Add support for ingenic JZ4770 panel.
 - Small null pointer deference fix in ingenic.
 - Remove support for the special tfp420 driver, as there is a generic way to do it.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAl34lkkACgkQ/lWMcqZw
 E8M76g//WRYl9fWnV063s44FBVJYjGxaus0vQJSGidaPCIE6Ep6TNjXp8DVzV82M
 HR79P9glL02DC9B8pflioNNXdIRGSVk/FJcKVB2seFAqEFCAknvWDM/X/y+mOUpp
 fUeFl+Znlwx3YlM8f4Qujdbm+CbTewfbya4VAWeWd8XG2V8jfq5cmODPPlUMNenZ
 J6Ja+W3ph741uSIfAKaP69LVJgOcuUjXINE4SWhRk/i5QF3GIRej/A7ZjWGLQ/t2
 2zUUF7EiCzhPomM40H3ddKtXb4ZjNJuc5pOD4GpxR8ciNbe2gUOHEZ5aenwYBdsU
 5MwbxNKyMbKXATtn3yv3fSc4jH3DtmEKpmovONeO8ZDBrQBnxeYa3tQvfkNghA2f
 acoZMzYUImV+ft6DMIgpXppASvo7mQYDAbLPOGEJ9E44AL4UP00jesEjnK5FOHSR
 3BEzGUnK/6QL5zFNPni8YZQ8dan4jDIno1mqIV+cQ4WCGlaKckzIWO6243Bf13b/
 kROSJpgWkiK6Ngq0ofhD0MHyT/m1QnqUzWRKTJhRtPflSWRBsDZqWCQ5Vx1QlNIE
 /HfTNbTpXWwa+5wXbbB8TkDw5t9cQGnR+QcrEd9HgoIec7B5Re8rx9i0TJAT4N05
 03RCQCecSfD8gwKd2wgaFIpFGRl9lTdLYSpffSmyL2X5a20lZhM=
 =b15X
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.6:

UAPI Changes:
- Add support for DMA-BUF HEAPS.

Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.

Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.

Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
 2019-12-17 13:57:54 +01:00
Wayne Lin
64e62bdf04 drm/dp_mst: Remove VCPI while disabling topology mgr 
[Why]

This patch is trying to address the issue observed when hotplug DP
daisy chain monitors.

e.g.
src-mstb-mstb-sst -> src (unplug) mstb-mstb-sst -> src-mstb-mstb-sst
(plug in again)

Once unplug a DP MST capable device, driver will call
drm_dp_mst_topology_mgr_set_mst() to disable MST. In this function,
it cleans data of topology manager while disabling mst_state. However,
it doesn't clean up the proposed_vcpis of topology manager.
If proposed_vcpi is not reset, once plug in MST daisy chain monitors
later, code will fail at checking port validation while trying to
allocate payloads.

When MST capable device is plugged in again and try to allocate
payloads by calling drm_dp_update_payload_part1(), this
function will iterate over all proposed virtual channels to see if
any proposed VCPI's num_slots is greater than 0. If any proposed
VCPI's num_slots is greater than 0 and the port which the
specific virtual channel directed to is not in the topology, code then
fails at the port validation. Since there are stale VCPI allocations
from the previous topology enablement in proposed_vcpi[], code will fail
at port validation and reurn EINVAL.

[How]

Clean up the data of stale proposed_vcpi[] and reset mgr->proposed_vcpis
to NULL while disabling mst in drm_dp_mst_topology_mgr_set_mst().

Changes since v1:
*Add on more details in commit message to describe the issue which the
patch is trying to fix

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
[added cc to stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205090043.7580-1-Wayne.Lin@amd.com
Cc: <stable@vger.kernel.org> # v3.17+
 2019-12-06 14:51:12 -05:00
Sean Paul
f79489074c drm/dp_mst: Clear all payload id tables downstream when initializing 
It seems that on certain MST hubs, namely the CableMatters USB-C 2x DP
hub, using the DP_PAYLOAD_ALLOCATE_SET and DP_PAYLOAD_TABLE_UPDATE_STATUS
register ranges to clear any pre-existing payload allocations on the hub isn't
always enough to reset things if the source device has been reset unexpectedly.

Or at least, that's the current running theory. The precise behavior appears to
be that when the source device gets reset unexpectedly, the hub begins reporting
an available_pbn value of 0 for all of its ports. This is a bit inconsistent
with the our theory, since this seems to happen even if previously set PBN
allocations should have resulted in a non-zero available_pbn value. So, it's
possible that something else may be going on here.

Strangely though, sending a CLEAR_PAYLOAD_ID_TABLE broadcast request when
initializing the MST topology seems to bring things into working order and make
available_pbn work again. Since this is a pretty safe solution, let's go ahead
and implement it.

Changes since v1:
* Change indenting on drm_dp_send_clear_payload_id_table() prototype
* Remove some braces in drm_dp_send_clear_payload_id_table()
* Reorganize some variable declarations in drm_dp_send_clear_payload_id_table()
* Don't forget to handle DP_CLEAR_PAYLOAD_ID_TABLE in
  drm_dp_sideband_parse_reply()
* Move drm_dp_send_clear_payload_id_table() call into
  drm_dp_mst_link_probe_work(), since we can't send sideband messages
  while under lock in drm_dp_mst_topology_mgr_set_mst()
* Change commit message

Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829000944.20722-1-lyude@redhat.com
 2019-12-05 13:13:46 -05:00
Wayne Lin
e5a6ca27eb drm/dp_mst: Correct the bug in drm_dp_update_payload_part1() 
[Why]
If the payload_state is DP_PAYLOAD_DELETE_LOCAL in series, current
code doesn't delete the payload at current index and just move the
index to next one after shuffling payloads.

[How]
Drop the i++ increasing part in for loop head and decide whether
to increase the index or not according to payload_state of current
payload.

Changes since v1:
* Refine the code to have it easy reading
* Amend the commit message to meet the way code is modified now.

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Fixes: 706246c761 ("drm/dp_mst: Refactor drm_dp_update_payload_part1()")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Juston Li <juston.li@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.1+
[Added cc for stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203042423.5961-1-Wayne.Lin@amd.com
 2019-12-04 15:31:16 -05:00
Colin Ian King
2c8bc91488 drm/dp_mst: fix multiple frees of tx->bytes 
Currently tx->bytes is being freed r->num_transactions number of
times because tx is not being set correctly. Fix this by setting
tx to &r->transactions[i] so that the correct objects are being
freed on each loop iteration.

Addresses-Coverity: ("Double free")
Fixes: 2f015ec6ea ("drm/dp_mst: Add sideband down request tracing + selftests")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120173509.347490-1-colin.king@canonical.com
 2019-11-20 14:16:15 -05:00
Sean Paul
b149cbfeec drm/mst: Fix up u64 division 
Change rem_nsec to u32 since that's what do_div returns, this avoids the
u64 divide in the drm_print args.

Changes in v2:
- Instead of doing do_div in drm_print, make rem_nsec u32 (Ville)

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20191106173622.15573-1-sean@poorly.run

Fixes: 12a280c728 ("drm/dp_mst: Add topology ref history tracking for debugging")
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106194121.164458-1-sean@poorly.run
 2019-11-06 15:20:37 -05:00
Chenwandun
68acde7629 drm/dp_mst: fix gcc compile error 
drivers/gpu/drm/drm_dp_mst_topology.c: In function __topology_ref_save:
drivers/gpu/drm/drm_dp_mst_topology.c:1424:6: error: implicit declaration of function stack_trace_save; did you mean stack_depot_save? [-Werror=implicit-function-declaration]
  n = stack_trace_save(stack_entries, ARRAY_SIZE(stack_entries), 1);
      ^~~~~~~~~~~~~~~~
      stack_depot_save
drivers/gpu/drm/drm_dp_mst_topology.c: In function __dump_topology_ref_history:
drivers/gpu/drm/drm_dp_mst_topology.c:1513:3: error: implicit declaration of function stack_trace_snprint; did you mean acpi_trace_point? [-Werror=implicit-function-declaration]
   stack_trace_snprint(buf, PAGE_SIZE, entries, nr_entries, 4);
   ^~~~~~~~~~~~~~~~~~~
   acpi_trace_point

stack_trace_save and stack_trace_snprint are declared in <linux/stacktrace.h>,
so there is need to include it, and <linux/stackdepot.h> is already included
by practices, so just replace <linux/stackdepot.h> by <linux/stacktrace.h>.

Signed-off-by: Chenwandun <chenwandun@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1572515029-42087-1-git-send-email-chenwandun@huawei.com
 2019-11-06 05:45:29 +10:00
Dave Airlie
57c2af791b Merge tag 'topic/mst-suspend-resume-reprobe-2019-10-29-2' of git://anongit.freedesktop.org/drm/drm-misc into drm-next 
UAPI Changes:

Cross-subsystem Changes:

Core Changes:
* Handle UP requests asynchronously in the DP MST helpers, fixing
  hotplug notifications and allowing us to implement suspend/resume
  reprobing
* Add basic suspend/resume reprobing to the DP MST helpers
* Improve locking for link address reprobing and connection status
  request handling in the DP MST helpers
* Miscellaneous refactoring in the DP MST helpers
* Add a Kconfig option to the DP MST helpers to enable tracking of
  gets/puts for topology references for debugging purposes

Driver Changes:
* nouveau: Resume hotplug interrupts earlier, so that sideband
  messages may be transmitted during resume and thus allow
  suspend/resume reprobing for DP MST to work
* nouveau: Avoid grabbing runtime PM references when handling short DP
  pulses, so that handling sideband messages in resume codepaths with the
  DP MST helpers doesn't deadlock us
* i915, nouveau, amdgpu, radeon: Use detect_ctx for probing MST
  connectors, so that we can grab the topology manager's atomic lock

Note: there's some amdgpu patches that I didn't realize were pushed
upstream already when creating this topic branch. When they fail to
apply, you can just ignore and skip them.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a74c6446bc960190d195a751cb6d8a00a98f3974.camel@redhat.com
 2019-10-30 09:51:03 +10:00
Lyude Paul
12a280c728 drm/dp_mst: Add topology ref history tracking for debugging 
For very subtle mistakes with topology refs, it can be rather difficult
to trace them down with the debugging info that we already have. I had
one such issue recently while trying to implement suspend/resume
reprobing for MST, and ended up coming up with this.

Inspired by Chris Wilson's wakeref tracking for i915, this adds a very
similar feature to the DP MST helpers, which allows for partial tracking
of topology refs for both ports and branch devices. This is a lot less
advanced then wakeref tracking: we merely keep a count of all of the
spots where a topology ref has been grabbed or dropped, then dump out
that history in chronological order when a port or branch device's
topology refcount reaches 0. So far, I've found this incredibly useful
for debugging topology refcount errors.

Since this has the potential to be somewhat slow and loud, we add an
expert kernel config option to enable or disable this feature,
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS.

Changes since v1:
* Don't forget to destroy topology_ref_history_lock
Changes since v4:
* Correct order of kref_put()/topology_ref_history_unlock - we can't
  unlock the history after kref_put() since the memory might have been
  freed by that point
* Don't print message on allocation error failures, the kernel already
  does this for us
Changes since v5:
* Get rid of some leftover usages of %px
* Remove a leftover empty return; statement

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-15-lyude@redhat.com
 2019-10-24 14:36:13 -04:00
Lyude Paul
6f85f73821 drm/dp_mst: Add basic topology reprobing when resuming 
Finally! For a very long time, our MST helpers have had one very
annoying issue: They don't know how to reprobe the topology state when
coming out of suspend. This means that if a user has a machine connected
to an MST topology and decides to suspend their machine, we lose all
topology changes that happened during that period. That can be a big
problem if the machine was connected to a different topology on the same
port before resuming, as we won't bother reprobing any of the ports and
likely cause the user's monitors not to come back up as expected.

So, we start fixing this by teaching our MST helpers how to reprobe the
link addresses of each connected topology when resuming. As it turns
out, the behavior that we want here is identical to the behavior we want
when initially probing a newly connected MST topology, with a couple of
important differences:

- We need to be more careful about handling the potential races between
  events from the MST hub that could change the topology state as we're
  performing the link address reprobe
- We need to be more careful about handling unlikely state changes on
  ports - such as an input port turning into an output port, something
  that would be far more likely to happen in situations like the MST hub
  we're connected to being changed while we're suspend

Both of which have been solved by previous commits. That leaves one
requirement:

- We need to prune any MST ports in our in-memory topology state that
  were present when suspending, but have not appeared in the post-resume
  link address response from their parent branch device

Which we can now handle in this commit by modifying
drm_dp_send_link_address(). We then introduce suspend/resume reprobing
by introducing drm_dp_mst_topology_mgr_invalidate_mstb(), which we call
in drm_dp_mst_topology_mgr_suspend() to traverse the in-memory topology
state to indicate that each mstb needs it's link address resent and PBN
resources reprobed.

On resume, we start back up &mgr->work and have it reprobe the topology
in the same way we would on a hotplug, removing any leftover ports that
no longer appear in the topology state.

Changes since v4:
* Split indenting changes in drm_dp_mst_topology_mgr_resume() into a
  separate patch
* Only fire hotplugs when something has actually changed after a link
  address probe
* Don't try to change port->connector at all on ports, just throw out
  ports that need their connectors removed to make things easier.

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-14-lyude@redhat.com
 2019-10-24 14:29:48 -04:00
Lyude Paul
79413ed4a1 drm/dp_mst: Lessen indenting in drm_dp_mst_topology_mgr_resume() 
Does what it says on the tin.

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-9-lyude@redhat.com
 2019-10-24 14:26:32 -04:00
Lyude Paul
dad7d84f88 drm/dp_mst: Don't forget to update port->input in drm_dp_mst_handle_conn_stat() 
This probably hasn't caused any problems up until now since it's
probably nearly impossible to encounter this in the wild, however if we
were to receive a connection status notification from the MST hub after
resume while we're in the middle of reprobing the link addresses for a
topology then there's a much larger chance that a port could have
changed from being an output port to input port (or vice versa). If we
forget to update this bit of information, we'll potentially ignore a
valid PDT change on a downstream port because we think it's an input
port.

So, make sure we read the input_port field in connection status
notifications in drm_dp_mst_handle_conn_stat() to prevent this from
happening once we've implemented suspend/resume reprobing.

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-8-lyude@redhat.com
 2019-10-24 14:26:12 -04:00
Lyude Paul
3f9b3f02dd drm/dp_mst: Protect drm_dp_mst_port members with locking 
This is a complicated one. Essentially, there's currently a problem in the MST
core that hasn't really caused any issues that we're aware of (emphasis on "that
we're aware of"): locking.

When we go through and probe the link addresses and path resources in a
topology, we hold no locks when updating ports with said information. The
members I'm referring to in particular are:

- ldps
- ddps
- mcs
- pdt
- dpcd_rev
- num_sdp_streams
- num_sdp_stream_sinks
- available_pbn
- input
- connector

Now that we're handling UP requests asynchronously and will be using some of
the struct members mentioned above in atomic modesetting in the future for
features such as PBN validation, this is going to become a lot more important.
As well, the next few commits that prepare us for and introduce suspend/resume
reprobing will also need clear locking in order to prevent from additional
racing hilarities that we never could have hit in the past.

So, let's solve this issue by using &mgr->base.lock, the modesetting
lock which currently only protects &mgr->base.state. This works
perfectly because it allows us to avoid blocking connection_mutex
unnecessarily, and we can grab this in connector detection paths since
it's a ww mutex. We start by having drm_dp_mst_handle_up_req() hold this
when updating ports. For drm_dp_mst_handle_link_address_port() things
are a bit more complicated. As I've learned the hard way, we can grab
&mgr->lock.base for everything except for port->connector. See, our
normal driver probing paths end up generating this rather obvious
lockdep chain:

&drm->mode_config.mutex
  -> crtc_ww_class_mutex/crtc_ww_class_acquire
    -> &connector->mutex

However, sysfs grabs &drm->mode_config.mutex in order to protect itself
from connector state changing under it. Because this entails grabbing
kn->count, e.g. the lock that the kernel provides for protecting sysfs
contexts, we end up grabbing kn->count followed by
&drm->mode_config.mutex. This ends up creating an extremely rude chain:

&kn->count
  -> &drm->mode_config.mutex
    -> crtc_ww_class_mutex/crtc_ww_class_acquire
      -> &connector->mutex

I mean, look at that thing! It's just evil!!! This gross thing ends up
making any calls to drm_connector_register()/drm_connector_unregister()
impossible when holding any kind of modesetting lock. This is annoying
because ideally, we always want to ensure that
drm_dp_mst_port->connector never changes when doing an atomic commit or
check that would affect the atomic topology state so that it can
reliably and easily be used from future DRM DP MST helpers to assist
with tasks such as scanning through the current VCPI allocations and
adding connectors which need to have their allocations updated in
response to a bandwidth change or the like.

Being able to hold &mgr->base.lock throughout the entire link probe
process would have been _great_, since we could prevent userspace from
ever seeing any states in-between individual port changes and as a
result likely end up with a much faster probe and more consistent
results from said probes. But without some rework of how we handle
connector probing in sysfs it's not at all currently possible. In the
future, maybe we can try using the sysfs locks to protect updates to
connector probing state and fix this mess.

So for now, to protect everything other than port->connector under
&mgr->base.lock and ensure that we still have the guarantee that atomic
check/commit contexts will never see port->connector change we use a
silly trick. See: port->connector only needs to change in order to
ensure that input ports (see the MST spec) never have a ghost connector
associated with them. But, there's nothing stopping us from simply
throwing the entire port out and creating a new one in order to maintain
that requirement while still keeping port->connector consistent across
the lifetime of the port in atomic check/commit contexts. For all
intended purposes this works fine, as we validate ports in any contexts
we care about before using them and as such will end up reporting the
connector as disconnected until it's port's destruction finalizes. So,
we just do that in cases where we detect port->input has transitioned
from true->false. We don't need to worry about the other direction,
since a port without a connector isn't visible to userspace and as such
doesn't need to be protected by &mgr->base.lock until we finish
registering a connector for it.

For updating members of drm_dp_mst_port other than port->connector, we
simply grab &mgr->base.lock in drm_dp_mst_link_probe_work() for already
registered ports, update said members and drop the lock before
potentially registering a connector and probing the link address of it's
children.

Finally, we modify drm_dp_mst_detect_port() to take a modesetting lock
acquisition context in order to acquire &mgr->base.lock under
&connection_mutex and convert all it's users over to using the
.detect_ctx probe hooks.

With that, we finally have well defined locking.

Changes since v4:
* Get rid of port->mutex, stop using connection_mutex and just use our own
  modesetting lock - mgr->base.lock. Also, add a probe_lock that comes
  before this patch.
* Just throw out ports that get changed from an output to an input, and
  replace them with new ports. This lets us ensure that modesetting
  contexts never see port->connector go from having a connector to being
  NULL.
* Write an extremely detailed explanation of what problems this is
  trying to fix, since there's a _lot_ of context here and I honestly
  forgot some of it myself a couple times.
* Don't grab mgr->lock when reading port->mstb in
  drm_dp_mst_handle_link_address_port(). It's not needed.

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-7-lyude@redhat.com
 2019-10-24 14:25:47 -04:00
Lyude Paul
14692a3637 drm/dp_mst: Add probe_lock 
Currently, MST lacks locking in a lot of places that really should have
some sort of locking. Hotplugging and link address code paths are some
of the offenders here, as there is actually nothing preventing us from
running a link address probe while at the same time handling a
connection status update request - something that's likely always been
possible but never seen in the wild because hotplugging has been broken
for ages now (with the exception of amdgpu, for reasons I don't think
are worth digging into very far).

Note: I'm going to start using the term "in-memory topology layout" here
to refer to drm_dp_mst_port->mstb and drm_dp_mst_branch->ports.

Locking in these places is a little tougher then it looks though.
Generally we protect anything having to do with the in-memory topology
layout under &mgr->lock. But this becomes nearly impossible to do from
the context of link address probes due to the fact that &mgr->lock is
usually grabbed under random various modesetting locks, meaning that
there's no way we can just invert the &mgr->lock order and keep it
locked throughout the whole process of updating the topology.

Luckily there are only two workers which can modify the in-memory
topology layout: drm_dp_mst_up_req_work() and
drm_dp_mst_link_probe_work(), meaning as long as we prevent these two
workers from traveling the topology layout in parallel with the intent
of updating it we don't need to worry about grabbing &mgr->lock in these
workers for reads. We only need to grab &mgr->lock in these workers for
writes, so that readers outside these two workers are still protected
from the topology layout changing beneath them.

So, add the new &mgr->probe_lock and use it in both
drm_dp_mst_link_probe_work() and drm_dp_mst_up_req_work(). Additionally,
add some more detailed explanations for how this locking is intended to
work to drm_dp_mst_port->mstb and drm_dp_mst_branch->ports.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-6-lyude@redhat.com
 2019-10-24 14:24:40 -04:00
Lyude Paul
9408cc94eb drm/dp_mst: Handle UP requests asynchronously 
Once upon a time, hotplugging devices on MST branches actually worked in
DRM. Now, it only works in amdgpu (likely because of how it's hotplug
handlers are implemented). On both i915 and nouveau, hotplug
notifications from MST branches are noticed - but trying to respond to
them causes messaging timeouts and causes the whole topology state to go
out of sync with reality, usually resulting in the user needing to
replug the entire topology in hopes that it actually fixes things.

The reason for this is because the way we currently handle UP requests
in MST is completely bogus. drm_dp_mst_handle_up_req() is called from
drm_dp_mst_hpd_irq(), which is usually called from the driver's hotplug
handler. Because we handle sending the hotplug event from this function,
we actually cause the driver's hotplug handler (and in turn, all
sideband transactions) to block on
drm_device->mode_config.connection_mutex. This makes it impossible to
send any sideband messages from the driver's connector probing
functions, resulting in the aforementioned sideband message timeout.

There's even more problems with this beyond breaking hotplugging on MST
branch devices. It also makes it almost impossible to protect
drm_dp_mst_port struct members under a lock because we then have to
worry about dealing with all of the lock dependency issues that ensue.

So, let's finally actually fix this issue by handling the processing of
up requests asyncronously. This way we can send sideband messages from
most contexts without having to deal with getting blocked if we hold
connection_mutex. This also fixes MST branch device hotplugging on i915,
finally!

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-5-lyude@redhat.com
 2019-10-24 14:24:21 -04:00
Lyude Paul
c485e2c97d drm/dp_mst: Refactor pdt setup/teardown, add more locking 
Since we're going to be implementing suspend/resume reprobing very soon,
we need to make sure we are extra careful to ensure that our locking
actually protects the topology state where we expect it to. Turns out
this isn't the case with drm_dp_port_setup_pdt() and
drm_dp_port_teardown_pdt(), both of which change port->mstb without
grabbing &mgr->lock.

Additionally, since most callers of these functions are just using it to
teardown the port's previous PDT and setup a new one we can simplify
things a bit and combine drm_dp_port_setup_pdt() and
drm_dp_port_teardown_pdt() into a single function:
drm_dp_port_set_pdt(). This function also handles actually ensuring that
we grab the correct locks when we need to modify port->mstb.

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-4-lyude@redhat.com
 2019-10-24 14:23:55 -04:00
Lyude Paul
d29333cf5c drm/dp_mst: Remove PDT teardown in drm_dp_destroy_port() and refactor 
This will allow us to add some locking for port->* members, in
particular the PDT and ->connector, which can't be done from
drm_dp_destroy_port() since we don't know what locks the caller might be
holding.

Note that we already do this in delayed_destroy_work (renamed from
destroy_connector_work in this patch) for ports, we're just making it so
mstbs are also destroyed in this worker.

Changes since v2:
* Clarify commit message
Changes since v4:
* Clarify commit message more

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-3-lyude@redhat.com
 2019-10-24 14:23:29 -04:00
Lyude Paul
7cb12d4831 drm/dp_mst: Destroy MSTBs asynchronously 
When reprobing an MST topology during resume, we have to account for the
fact that while we were suspended it's possible that mstbs may have been
removed from any ports in the topology. Since iterating downwards in the
topology requires that we hold &mgr->lock, destroying MSTBs from this
context would result in attempting to lock &mgr->lock a second time and
deadlocking.

So, fix this by first moving destruction of MSTBs into
destroy_connector_work, then rename destroy_connector_work and friends
to reflect that they now destroy both ports and mstbs.

Note that even though this means that MSTBs will still be accessible for
a short period of time between their removal from the topology and
delayed destruction, we are still protected against referencing a MSTB
with a refcount of 0 since we use kref_get_unless_zero() in most places.

Changes since v1:
* s/destroy_connector_list/destroy_port_list/
  s/connector_destroy_lock/delayed_destroy_lock/
  s/connector_destroy_work/delayed_destroy_work/
  s/drm_dp_finish_destroy_branch_device/drm_dp_delayed_destroy_mstb/
  s/drm_dp_finish_destroy_port/drm_dp_delayed_destroy_port/
  - danvet
* Use two loops in drm_dp_delayed_destroy_work() - danvet
* Better explain why we need to do this - danvet
* Use cancel_work_sync() instead of flush_work() - flush_work() doesn't
  account for work requeing

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-2-lyude@redhat.com
 2019-10-24 14:21:55 -04:00
Wambui Karuga
ddd9b54dee drm: remove unnecessary return variable 
Remove unnecessary variable `ret` in drm_dp_atomic_find_vcpi_slots()
only used to hold the function return value and have the function
return the value directly.
Issue found by coccinelle:
@@
local idexpression ret;
expression e;
@@

-ret =
+return
     e;
-return ret;

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191019071840.16877-1-wambui@karuga.xyz
 2019-10-22 11:17:43 +02:00
Lucas De Marchi
67c698fc5e drm/dp-mst: fix warning on unused var 
Fixes: 83fa9842af ("drm/dp-mst: Drop connection_mutex check")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011010907.103309-8-lucas.demarchi@intel.com
 2019-10-14 19:48:07 +02:00
Daniel Vetter
83fa9842af drm/dp-mst: Drop connection_mutex check 
Private atomic objects have grown their own locking with

commit b962a12050
Author: Rob Clark <robdclark@gmail.com>
Date:   Mon Oct 22 14:31:22 2018 +0200

    drm/atomic: integrate modeset lock with private objects

which means we're no longer relying on connection_mutex for mst state
locking needs.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009224113.5432-1-daniel.vetter@ffwll.ch
 2019-10-10 15:40:35 +02:00
Jani Nikula
f0a8f533ad drm/print: add drm_debug_enabled() 
Add helper to check if a drm debug category is enabled. Convert drm core
to use it. No functional changes.

v2: Move unlikely() to drm_debug_enabled() (Eric)

v3: Keep unlikely() when combined with other conditions (Eric)

Cc: Eric Engestrom <eric@engestrom.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001140614.26909-1-jani.nikula@intel.com
 2019-10-02 16:28:55 +03:00
Ville Syrjälä
ed20b7d5c6 drm/dp/mst: Replace the fixed point thing with straight calculation 
Get rid of the drm_fixp_from_fraction() usage and just do the
straightforward calculation directly.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925141442.23236-3-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
 2019-09-30 20:57:42 +03:00
Ville Syrjälä
0c3bb15cfc drm/dp/mst: Handle arbitrary DP_LINK_BW values 
Make drm_dp_get_vc_payload() tolerate arbitrary DP_LINK_BW_*
values, just like drm_dp_bw_code_to_link_rate() does since commit
57a1b08937 ("drm: Make the bw/link rate calculations more forgiving").

Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925141442.23236-2-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
 2019-09-30 20:56:11 +03:00
Ville Syrjälä
db0cc143b6 drm/dp/mst: Reduce nested ifs 
Replace the nested ifs with a single if and a logical AND.

Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925141442.23236-1-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
 2019-09-30 20:54:20 +03:00
Matt Roper
caf81ec6cd drm: Destroy the correct mutex name in drm_dp_mst_topology_mgr_destroy 
It looks like one of the topology manager mutexes may have been renamed
during a rebase, but the destruction function wasn't updated with the
new name:

   error: ‘struct drm_dp_mst_topology_mgr’ has no member named
   ‘delayed_destroy_lock’

Fixes: 50094b5dcd ("drm/dp_mst: Destroy topology_mgr mutexes")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925224617.24027-1-matthew.d.roper@intel.com
 2019-09-25 19:28:59 -04:00
Lyude Paul
e2839ff692 drm/dp_mst: Rename drm_dp_add_port and drm_dp_update_port 
The names for these functions are rather confusing. drm_dp_add_port()
sounds like a function that would simply create a port and add it to a
topology, and do nothing more. Similarly, drm_dp_update_port() would be
assumed to be the function that should be used to update port
information after initial creation.

While those assumptions are currently correct in how these functions are
used, a quick glance at drm_dp_add_port() reveals that drm_dp_add_port()
can also update the information on a port, and seems explicitly designed
to do so. This can be explained pretty simply by the fact that there's
more situations that would involve updating the port information based
on a link address response as opposed to a connection status
notification than the driver's initial topology probe. Case in point:
reprobing link addresses after suspend/resume.

Since we're about to start using drm_dp_add_port() differently for
suspend/resume reprobing, let's rename both functions to clarify what
they actually do.

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-18-lyude@redhat.com
 2019-09-25 16:35:15 -04:00