For compact IPCs, we will send the IPC header/command via the HIPCIDR
register and the first 32bit payload via the HIPCIDD register, no
mailbox will be used.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add snd_sof_set_d0_substate() helper for setting ADSP to a specific D0
substate, it will call into the platform specific implementation, and
update the d0_substate at success.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The configuration for D0ix in FW is platform specific, let's do this and
send IPC in the platform set_power_state() ops.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On cAVS platforms, some IPCs are required to be sent via IPC registers
only(e.g. when in D0i3, mailbox is unaccessible), add hda-ipc.h to hold
definition of those compact IPCs.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Memory windows could be powered off before receiving PM_GATE IPC reply
from FW, we can't read the mailbox to get reply.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The helper sof_send_pm_ipc() is only suitable for context save/restore
IPCs' sending, so rename it to sof_send_pm_ctx_ipc here.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parses the token from tplg file and store it to snd_sof_pcm_stream
d0i3_compatible flag, which can be used later for d0ix transition
management.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add stream token SOF_TKN_STREAM_PLAYBACK_COMPATIBLE_D0I3 and
SOF_TKN_STREAM_CAPTURE_COMPATIBLE_D0I3 to denote if the stream can be
opened at low power d0i3 status or not.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add flag d0i3_compatible to struct snd_sof_pcm_stream to denote if the
stream can tolerate a transition to the D0i3 substate while opened (thus
seen as 'active' by pm_runtime).
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using hda_dsp_set_power_state() as set_power_state() ops for apl to do
d0ix platform configuration updates.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using hda_dsp_set_power_state() as set_power_state() ops for cnl to do
d0ix platform configuration updates.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding helper to implement setting dsp to d0i3 or d0i0 status, this will
be needed for driver D0ix support.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
D0i3 is a platform-defined substate of D0, so we need a
platform-specific callback in dsp_ops to handle the relevant
configurations.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We initialize/reset d0_substate to default d0i0 value when doing
transition D3-->D0, e.g. at success of probing and resuming.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add field d0_substate to struct snd_sof_dev to store the current DSP
D0 sub-state(only meaningful when DSP in D0), which could be D0I0 or
D0I3.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
chan > 8 or chan < 0 shouldn't happen.
This patch uses WARN_ON() for such case.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2x530a4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
xrun may happen at the end of stream, the
trigger->fsl_esai_trigger_stop maybe called in the middle of
fsl_esai_hw_reset, this may cause esai in wrong state
after stop, and there may be endless xrun interrupt.
This issue may also happen with trigger->fsl_esai_trigger_start.
So Add spin lock to lock those functions.
Fixes: 7ccafa2b38 ("ASoC: fsl_esai: recover the channel swap after xrun")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/52e92c4221a83e39a84a6cd92fc3d5479b44894c.1572252321.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The output divider should align with the output sample
rate, if use ideal sample rate, there will be a lot of overload,
which would cause underrun.
The maximum divider of asrc clock is 1024, but there is no
judgement for this limitation in driver, which may cause the divider
setting not correct.
For non-ideal ratio mode, the clock rate should divide the sample
rate with no remainder, and the quotient should be less than 1024.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/23c634e4bf58afce5b3ae67f5f42e8d1cae2639a.1572252307.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The first DMIC capture always fail (zero sequence data from PCM port)
after using DSP hotwording function (i.e. Google assistant).
This rt5514 codec requires to control mclk directly in the set_bias_level
function. Implement this function in machine driver to control the
ssp1_mclk clock explicitly could fix this issue.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1571994691-20199-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 4ac85de997 ("ASoC: fsl: fsl_dma: remove snd_pcm_ops") removed
fsl_dma_ops but left a usage, leading to a build error for some
configs, eg. mpc85xx_defconfig:
sound/soc/fsl/fsl_dma.c: In function ‘fsl_soc_dma_probe’:
sound/soc/fsl/fsl_dma.c:905:18: error: ‘fsl_dma_ops’ undeclared (first use in this function)
dma->dai.ops = &fsl_dma_ops;
^~~~~~~~~~~
Remove the usage to fix the build.
Fixes: 4ac85de997 ("ASoC: fsl: fsl_dma: remove snd_pcm_ops")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191025051353.2878-1-mpe@ellerman.id.au
Signed-off-by: Mark Brown <broonie@kernel.org>
max98090 spec states that chip needs to be in turned-on state to supply
mic bias. Enable SHDN dapm widget along with MICBIAS widget to
actually turn on mic bias for proper headset button detection.
This is similar to cht_ti_jack_event in
sound/soc/intel/boards/cht_bsw_max98090_ti.c.
Note that due to ts3a227e reports the jack event right away before the
notifier is registered, if headset is plugged on boot, headset button
will not get detected until headset is unplugged and plugged. This is
still an issue to be fixed.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20191028095229.99438-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When non standard names are used it is possible that one of the directions
are not provided, thus the flags needs to be present to tell the core that
we have half duplex setup.
Fixes: 642aafea88 ("ASoC: ti: remove compat dma probing")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191028115207.5142-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the implementation of sof_set_get_large_ctrl_data() there is a memory
leak in case an error. Release partdata if sof_get_ctrl_copy_params()
fails.
Fixes: 54d198d501 ("ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properly")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20191027215330.12729-1-navid.emamdoost@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the implementation of sof_dfsentry_write() memory allocated for
string is leaked in case of an error. Go to error handling path if the
d_name.name is not valid.
Fixes: 091c12e1f5 ("ASoC: SOF: debug: add new debugfs entries for IPC flood test")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20191027194856.4056-1-navid.emamdoost@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are missing the 'CONFIG_' prefix when using the kernel configure item
SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1, here correct them.
Fixes: 43b2ab9009 ('ASoC: SOF: Intel: hda: Disable DMI L1 entry during capture')
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025221538.6668-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current position update is not precise enough for PulseAudio to
work reliably with the timer-based scheduling on Baytrail,
Cherrytrail, Broadwell.
Disable the NO_PERIOD_WAKEUP capability and use BATCH to signal that
the position is only reliable and updated during period_elapsed
events.
This will be reverted when the firmware provides a more accurate
position for those platforms.
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191024210318.30068-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the INFO_ flags such as PAUSE/NO_PERIOD_WAKEUP are defined
in the SOF PCM core, which doesn't scale. To account for platform
variations, these flags need to be set in DSP ops.
This patch only moves the definitions and does not change any
functionality.
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191024210318.30068-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We see odd FIFO overruns with this, we assume the best thing to do is
to disable the RX I2S frontend first, and then disable the FIFO that
is using it.
This also fixes an issue where using multi-word frames (TDM) have
partial samples stuck in the FIFO which then get read out when the
next capture is started.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-5-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a callback to configure TDM settings for the Tegra30 I2S ASoC 'platform'
driver.
Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: merge fix for power management]
[ben.dooks@codethink.co.uk: add review change for fsync of 1 clock]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-2-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
The tegra3 audio can support 24 and 32 bit sample sizes so add the
option to the tegra30_i2s_hw_params to configure the S24_LE or S32_LE
formats when requested.
Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: fixup merge of 24 and 32bit]
[ben.dooks@codethink.co.uk: add pm calls around ytdm config]
[ben.dooks@codethink.co.uk: drop debug printing to dev_dbg]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-3-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix bugs reported by kbuild test robot
Fixes: a0e0d13542 ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191024184026.183913-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The allocation of rt5677_dsp can potentially fail and return null, so add
a null check and return -ENOMEM on a memory allocation failure.
Addresses-Coverity: ("Dereference null return")
Fixes: a0e0d13542 ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191024124610.18182-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add platform specific data for Kahlee project.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191023212948.92246-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The devm conversion of kirkwood was incorrect; on removal, devm takes
effect after the "remove" function has returned. So, the effect of
the conversion was to change the order during remove from:
- snd_soc_unregister_component() (unpublishes interfaces)
- clk_disable_unprepare()
- cleanup resources
After the conversion, this became:
- clk_disable_unprepare() - while the device may still be active
- snd_soc_unregister_component()
- cleanup resources
Hence, it introduces a bug, where the internal clock for the device
may be shut down before the device itself has been shut down. It is
known that Marvell SoCs, including Dove, locks up if registers for a
peripheral that has its clocks disabled are accessed.
Fixes: f98fc0f815 ("ASoC: kirkwood: replace platform to component")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1iNGyP-0004oN-BA@rmk-PC.armlinux.org.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently each SSI unit's busif dma address is calculated by
following calculation formula:
0xec540000 + 0x1000 * id + busif / 4 * 0xA000 + busif % 4 * 0x400
But according to R-Car3 HW manual 41.1.4 Register Configuration,
ssi9 4/5/6/7 busif data register address
(SSI9_4_BUSIF/SSI9_5_BUSIF/SSI9_6_BUSIF/SSI9_7_BUSIF)
are out of this rule.
This patch updates the calculation formula to correct
ssi9 4/5/6/7 busif data register address.
Fixes: 5e45a6fab3 ("ASoc: rsnd: dma: Calculate dma address with consider of BUSIF")
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
[erosca: minor improvements in commit description]
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191022185429.12769-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Kconfig, PCI ID and chip info for JSL platform.
The DSP only has 2 cores for this platform.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022194705.23347-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Such traces should be extremely rare but extremely useful for debug.
Report errors for all calls to sdn_sof_dsp_read_poll_timeout(), but
only on negative values for consistency.
Add traces that enable each timeout to be uniquely identified.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022192844.21022-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a ROM timeout is detected, we still stop the DMA but will return
the initial error should the DMA stop also fail.
Likewise the cleanup is handled regardless of the status, but we
return the initial error.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022192844.21022-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=y,
below errors can be seen:
sound/soc/codecs/cros_ec_codec.o: In function `send_ec_host_command':
cros_ec_codec.c:(.text+0x534): undefined reference to `cros_ec_cmd_xfer_status'
cros_ec_codec.c:(.text+0x101c): undefined reference to `cros_ec_get_host_event'
This is because it will select SND_SOC_CROS_EC_CODEC
after commit 2cc3cd5fdc ("ASoC: mediatek: mt8183: support WoV"),
but SND_SOC_CROS_EC_CODEC depends on CROS_EC.
Fixes: 2cc3cd5fdc ("ASoC: mediatek: mt8183: support WoV")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Link: https://lore.kernel.org/r/20191023063103.44941-1-maowenan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing of_node_put() for
rsnd_parse_tdm_split_mode()
rsnd_parse_connect_graph()
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736fkyzx8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to R-Car3 HW manual 40.3.3 (Data Format on Audio Local Bus),
in case of monaural data writing or reading through Audio-DMAC,
it's always in Left Justified format, so both src and dst
DMA Bus width should be equal to physical data width.
Therefore set src and dst's DMA bus width to:
- [monaural case] data width
- [non-monaural case] 32bits (as prior applying the patch)
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191022185518.12838-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has for_each_rtdcom() which is link list for
rtd-component which is called as rtdcom. The relationship image is like below
rtdcom rtdcom rtdcom
component component component
rtd->component_list -> list -> list -> list ...
Here, the pointer get via normal link list is rtdcom,
Thus, current for_each loop is like below, and need to get
component via rtdcom->component
for_each_rtdcom(rtd, rtdcom) {
component = rtdcom->component;
...
}
but usually, user want to get pointer from for_each_xxx is component
directly, like below.
for_each_rtd_component(rtd, rtdcom, component) {
...
}
This patch expands list_for_each_entry manually, and enable to get
component directly from for_each macro.
Because of it, the macro becoming difficult to read,
but macro itself becoming useful.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878spm64m4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When our call to get the external clock fails, we forget to clean up
the enabled internal clock correctly. Enable the clock after we have
obtained all our resources.
Fixes: 84aac6c79b ("ASoC: kirkwood: fix loss of external clock at probe time")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1iNGyK-0004oF-6A@rmk-PC.armlinux.org.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
For distributions, we need one place where we can decide
which driver will be activated for the auto-configation of the
Intel's HDA hardware with DSP. Actually, we cover three drivers:
* Legacy HDA
* Intel SST
* Intel Sound Open Firmware (SOF)
All those drivers registers similar PCI IDs, so the first
driver probed from the PCI stack can win. But... it is not
guaranteed that the correct driver wins.
This commit changes Intel's NHLT ACPI module to a common
DSP probe module for the Intel's hardware. All above sound
drivers calls this code. The user can force another behaviour
using the module parameter 'dsp_driver' located in
the 'snd-intel-dspcfg' module.
This change allows to add specific dmi checks for the specific
systems. The examples are taken from the pull request:
https://github.com/thesofproject/linux/pull/927
Tested on Lenovo Carbon X1 7th gen.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022174313.29087-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
soc_remove_link_components() will be called from
soc_cleanup_card_resources(). This patch removes duplicate call.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e5664lz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_prune_paths() is checking widget at 2 parts.
(A) is for CPU, (B) is for Codec.
If we focus to (A) part, continue at (a) is for (1) loop. But,
if we focus to (B) part, continue at (b) is for (2) loop, not for (1).
This is bug.
This patch fixup this issue.
static int dpcm_prune_paths(...)
{
...
(1) for_each_dpcm_be(fe, stream, dpcm) {
...
^ widget = dai_get_widget(...);
|
(A) if (widget && widget_in_list(...))
| (a) continue;
v
^ (2) for_each_rtd_codec_dai(...) {
| widget = dai_get_widget(...);
(B)
| if (widget && widget_in_list(...))
v (b) continue;
}
...
Fixes: 2e5894d737 ("ASoC: pcm: Add support for DAI multicodec")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blui64mf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch implements a PCM interface for streaming hotword
phrases over SPI. Userspace can open the PCM device at anytime.
The stream is blocked when no hotword is detected. The mic
audio buffer on the DSP is a ~128KByte ring buffer that holds
~4sec of audio samples recorded from the DMIC (S16_LE, mono,
16KHz). After a hotword is detected, previous 2 seconds of audio
(containing the detected hotword) is streamed first, then live
capture continues until userspace closes the PCM stream.
When transferring, copy one period at a time then call
snd_pcm_period_elapsed(). This reduces the latency of transferring
the initial ~2sec of audio after hotword detect since audio samples
are available for userspace earlier.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191018200449.141123-2-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
1. Get EC codec's capabilities.
2. Get and set SHM address if any.
3. Transmit language model to EC codec if needed.
4. Start to read audio data from EC codec if receives host event.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20191019143504.1.I5388b69a7a9c551078fed216a77440cee6dedf49@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
PM8916 supports an earpiece as another (small) speaker.
The earpiece is routed through RX MIX1 similarly to
the headphones, except that RDAC2 MUX is set to RX1.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191020153007.206070-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the PM8916 Hardware Register Description,
CDC_D_CDC_CONN_HPHR_DAC_CTL has only a single bit (RX_SEL)
to switch between RX1 (0) and RX2 (1). It is not possible to
disable it entirely to achieve the "ZERO" state.
However, at the moment the "RDAC2 MUX" mixer defines three possible
values ("ZERO", "RX2" and "RX1"). Setting the mixer to "ZERO"
actually configures it to RX1. Setting the mixer to "RX1" has
(seemingly) no effect.
Remove "ZERO" and replace it with "RX1" to fix this.
Fixes: 585e881e5b ("ASoC: codecs: Add msm8916-wcd analog codec")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191020153007.206070-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of fixes that have arrived since the merge window. There
are a small number of core fixes here but they are smaller ones around
error handling.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl2tmNgTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Mp7B/9TN2O39/jS2Rjg7jUtHHqpBSv2a4Tq
oyJ6l69C2aeS2HLqJc5PkFRXw2C2pOdMdCjY7XXNC3M02zIC9Eh5b2Y2FlYPhMUz
LMHVZ69IU0vMgW/9AWi140h7h0pDoNzqagsIpzm1+UDkk0ITH7NORUyc4BKCLJiG
MzgWtExa7MiakkriS23LPPNDspx05aRKul+wB20GBKCB1W5LjBDiiH5JUmyx9C23
Gto04TrDbJrRmQeVcJJfuzWQRcQVhocdjqqjI5lrvYPqB8eawBIN+x/DHBkjnmBw
JOZaQqAlOmCV5sJhkX/KW9nE+SqELPVMDE1LgNIQXspxKL3vXX1OqQ7i
=EmvC
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.4-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.4
A collection of fixes that have arrived since the merge window. There
are a small number of core fixes here but they are smaller ones around
error handling.
There is no need to keep a pointer to the platform device. Currently there are
no users of it directly, and if there will be in the future we may restore it
from pointer to the struct device.
Convert all users at the same time.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191018105429.82782-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Read max DMIC gain from EC codec instead of DTS. Also removes the
dt-binding of max-dmic-gain.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191017213539.05.Id4657c864d544634f2b5c1c9b34fa8232ecba44d@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
aic32x4_set_dai_sysclk misses a check for devm_clk_get and may miss the
failure.
Add a check to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191018081448.8486-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor by the following items:
- reformat copyright declaration
- use more specific name "i2s rx"
- use verbose symbol names to separate namespaces
- make some short functions inline
- remove unused TDM-related code
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Acked-By: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20191014180059.02.I43373b9a66dbb70196b3f216b3aa86111c410836@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
All the kcontrol put() functions are currently returning 0 when
successful. This does not go well with alsamixer as it does
not seem to get notified on SND_CTL_EVENT_MASK_VALUE callbacks
when values change for (some of) the sof kcontrols.
This patch fixes that by returning true for volume, switch
and enum type kcontrols when values do change in put().
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191018123806.18063-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit below, adds a call to sysclk callback on shutdown.
This introduces a regression in stm32 SAI driver, as some clock
services are called twice, leading to unbalanced calls.
Move processing related to mclk from shutdown to sysclk callback.
When requested frequency is 0, assume shutdown and release mclk.
Fixes: 2458adb8f9 ("SoC: simple-card-utils: set 0Hz to sysclk when shutdown")
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191018082040.31022-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_audio_probe misses a check for devm_clk_get and may cause problems.
Add a check for it to fix the bug.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191017025044.31474-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Unlike other format-related DAI parameters, rdai->bit_clk_inv flag
is not properly re-initialized when setting format for new stream
processing. The inversion, if requested, is then applied not to default,
but to a previous value, which leads to SCKP bit in SSICR register being
set incorrectly.
Fix this by re-setting the flag to its initial value, determined by format.
Fixes: 1a7889ca8a ("ASoC: rsnd: fixup SND_SOC_DAIFMT_xB_xF behavior")
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Timo Wischer <twischer@de.adit-jv.com>
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Junya Monden <jmonden@jp.adit-jv.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191016124255.7442-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As said in commit f2c2cbcc35 ("powerpc: Use pr_warn instead of
pr_warning"), removing pr_warning so all logging messages use a
consistent <prefix>_warn style. Let's do it.
Link: http://lkml.kernel.org/r/20191018031850.48498-28-wangkefeng.wang@huawei.com
To: linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Typically, the r0 (calibration data) and temperature were measured in the factory.
This information is written into the non-volatile area
where keeps data whether factory reset or OS update.
In Chromium OS case, the coreboot will read the info from VPD and create
the device property for each rt1011.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Tested-By: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20191016085845.11672-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the memcpy/be32_to_cpu() code by simply using
get_unaligned_be32() throughout and makes the code nicer
to look at.
This fixes the following warnings from sparse:
sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191016120149.5860-1-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
fmt 0 is perfectly valid (PCM3168A_FMT_I2S). Remove the return in case
fmt == 0.
Fixes: ("ASoC: pcm3168a: Use fixup instead of constraint for channels and formats")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191015090037.23271-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rt5663 and rt5514 needs mclk/sclk early to synchronize its internal
clocks.
Signed-off-by: Naveen M <naveen.m@intel.com>
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1571070480-25666-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When LEDS_TRIGGER_AUDIO is m and SND_SOC_SOF is y,
sound/soc/sof/control.o: In function `snd_sof_switch_put':
control.c:(.text+0x587): undefined reference to `ledtrig_audio_set'
control.c:(.text+0x593): undefined reference to `ledtrig_audio_set'
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 5d43001ae4 ("ASoC: SOF: acpi led support for switch controls")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191014091308.23688-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_parse_tokens() returns a value that is checked on every call
except for LED tokens, fix with explicit test.
Detected with cppcheck warning:
sound/soc/sof/topology.c:973:6: style: Variable 'ret' is assigned a
value that is never used. [unreadVariable]
ret = sof_parse_tokens(scomp, &scontrol->led_ctl, led_tokens,
^
Fixes: 5d43001ae4 ("ASoC: SOF: acpi led support for switch controls")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191011164312.7988-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Address cppcheck warning:
sound/soc/sof/topology.c:2322:6: style: Condition 'pcm' is always true
[knownConditionTrueFalse]
if (pcm) {
^
sound/soc/sof/topology.c:2311:6: note: Assuming that condition '!pcm'
is not redundant
if (!pcm)
^
sound/soc/sof/topology.c:2322:6: note: Condition 'pcm' is always true
if (pcm) {
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191011164312.7988-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
gcc warn about this:
sound/soc/fsl/fsl_mqs.c:146:1: warning:
static is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20191011143538.15300-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When STM32 SPDIFRX is in sync state, allow multiple
synchro attempts, instead of exiting on first unsuccessful
trial. This is useful when spdif signal is not immediately
available on input. This also allows Pulseaudio to check
iec capture device availability when no signal is present.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191011084816.14279-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ESAI parameters are read for topology file, packed into
sof_ipc_dai_esai_parms struct and then sent to DSP.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently sof doesn't support acpi leds with mute switches. So implement
acpi leds following quite shamelessly existing HDA implementation by
Takashi Iwai.
Mute leds can be enabled in topology by adding led and direction token
in switch control private data.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add debug parameter for snd-sof-pci.
One of the usages for this debug parameter to disable pm_runtime,
which can be useful for platform bringup, or keep the parent device
active while enabling pm_runtime for child devices (e.g. with
SoundWire or MFD). This can also be useful to measure suspend-resume
latencies or child devices.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add debug parameter for snd-sof-acpi.
One of the usages for this debug parameter to disable pm_runtime,
which can be useful for platform bringup, or keep the parent device
active while enabling pm_runtime for child devices (e.g. with
SoundWire or MFD). This can also be useful to measure suspend-resume
latencies or child devices.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 64ca9d9fcb.
The workaround is no longer needed after configuring HDAC
bus with sync_write=1.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently sof pga element supports only 1 kcontrol and you can't create
for example a mixer element with combined volume slider and mute switch.
So enable sof pga to have more than 1 kcontrol associated with it. Also
check for possible NULL tlv pointer as switch element might not have it.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Align SOF HDA implementation with snd-hda-intel driver and enable
sync_write flag for all supported Intel platforms in SOF. When set,
a sync is issued after each verb write.
Sync after write has helped to overcome intermittent delays in
system resume flow on Intel Coffee Lake systems, and most recently
probe errors related to the HDMI codec on Ice Lake systems.
Matches the snd-hda-intel driver change done in commit 2756d9143a
("ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips").
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the 8 channel PDM-to-I2S/TDM converter. The
ADAU7118 converts four stereo pulse density modulation (PDM) bitstreams
into one pulse code modulation (PCM) output stream. The source for the PDM
data can be eight microphones or other PDM sources. The PCM audio data is
output on a serial audio interface port in either inter-IC serial (I2S) or
time domain multiplexed (TDM) format.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20191010074234.7344-1-nuno.sa@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing MIX2 path on RX1/2 which take IIR1 and
IIR2 as inputs.
Without this patch sound card fails to intialize with below warning:
ASoC: no sink widget found for RX1 MIX2 INP1
ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX2 INP1
ASoC: no sink widget found for RX2 MIX2 INP1
ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX2 INP1
ASoC: no sink widget found for RX1 MIX2 INP1
ASoC: Failed to add route IIR2 -> IIR2 -> RX1 MIX2 INP1
ASoC: no sink widget found for RX2 MIX2 INP1
ASoC: Failed to add route IIR2 -> IIR2 -> RX2 MIX2 INP1
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191009111944.28069-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 67ad656bdd ("ASoC: jz4740: Use
of_device_get_match_data()"), the match local variable is unused and the
compiler rightly warns.
sound/soc/jz4740/jz4740-i2s.c: In function 'jz4740_i2s_dev_probe':
sound/soc/jz4740/jz4740-i2s.c:500:29: warning: unused variable 'match' [-Wunused-variable]
500 | const struct of_device_id *match;
Drop it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: <alsa-devel@alsa-project.org>
Fixes: 67ad656bdd ("ASoC: jz4740: Use of_device_get_match_data()")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191008235212.228856-1-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_rtdcom_lookup() will be removed.
It is used at fsl_dma_isr(), but it is just for dev_err(dev..).
rtd->dev is very enough for it.
This patch replace component->dev to rtd->dev
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e5n90cn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_ops is no longer needed.
Let's use component driver callback.
*Note*
Only Intel skl-pcm has .get_time_info implementation, but ALSA SoC
framework doesn't call it so far.
To keep its implementation, this patch keeps .get_time_info,
but it is still not called.
Intel guy need to support it in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o8yzaf2f.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_component_driver has pcm_new/pcm_free, but,
it doesn't have "component" at parameter.
Thus, each callback can't know it is called for which component.
Each callback currently is getting "component" by using
snd_soc_rtdcom_lookup() with driver name.
It works today, but, will not work in the future if we support multi
CPU/Codec/Platform, because 1 rtd might have multiple same driver
name component.
To solve this issue, each callback need to be called with component.
This patch adds new pcm_construct/pcm_destruct with "component"
parameter.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgobaf3g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_component_driver has snd_pcm_ops, and each driver can
have callback via it (1).
But, it is mainly created for ALSA, thus, it doesn't have "component"
as parameter for ALSA SoC (1)(2).
Thus, each callback can't know it is called for which component.
Thus, each callback currently is getting "component" by using
snd_soc_rtdcom_lookup() with driver name (3).
--- ALSA SoC ---
...
if (component->driver->ops &&
component->driver->ops->open)
(1) return component->driver->ops->open(substream);
...
--- driver ---
(2) static int xxx_open(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
(3) struct snd_soc_component *component = snd_soc_rtdcom_lookup(..);
...
}
It works today, but, will not work in the future if we support multi
CPU/Codec/Platform, because 1 rtd might have multiple components which
have same driver name.
To solve this issue, each callback needs to be called with component.
We already have many component driver callback.
This patch copies each snd_pcm_ops member under component driver,
and having "component" as parameter.
--- ALSA SoC ---
...
if (component->driver->open)
=> return component->driver->open(component, substream);
...
--- driver ---
=> static int xxx_open(struct snd_soc_component *component,
struct snd_pcm_substream *substream)
{
...
}
*Note*
Only Intel skl-pcm has .get_time_info implementation, but ALSA SoC
framework doesn't call it so far.
To keep its implementation, this patch keeps .get_time_info,
but it is still not called.
Intel guy need to support it in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tv8raf3r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before regmap_reinit_cache we must reset audio regs as default values.
So we use reset controller unit(toprgu) to reset audio hw.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Link: https://lore.kernel.org/r/1569580317-21181-5-git-send-email-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_pcm_hw_constraint_minmax() works fine when a single codec is
connected to a single CPU DAI, but in multicodec or DPCM setup the
constraints placed by the driver will apply to the whole PCM stream (FE
included) and thus prevents more than 8 playback channels for example.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191008115720.7135-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According the documentation for snd_soc_update_bits the API
will return a 1 if the update was successful with a value change,
a 0 if the update was successful with no value change or a negative
if the command just failed.
So the value of return in the driver needs to be checked for being less
then 0 or the caller may indicate failure when the value actually
changed.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20191007171157.17813-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unused defines and structure variables that are not
referenced by the code. If these are needed for future
enhancements then they should be added at that time.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20191007171157.17813-3-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the unneeded and incorrect read of the TDM_CFG3 register.
The read is done but the value is never used.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20191007171157.17813-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are several problems in the error handling in fsl_mqs_probe().
1) "ret" isn't initialized on some paths. GCC has a feature which
warns about uninitialized variables but the code initializes "ret"
to zero at the start of the function so the checking is turned off.
2) "gpr_np" is a pointer so initializing it to zero is confusing and
generates a Sparse warning.
3) of_parse_phandle() doesn't return error pointers on error, it returns
NULL.
4) If devm_snd_soc_register_component() fails then the function should
free the "gpr_np".
Fixes: 9e28f6532c ("ASoC: fsl_mqs: Add MQS component driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20191004102208.GB823@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes gcc '-Wunused-but-set-variable' warning:
sound/soc/fsl/fsl_mqs.c: In function fsl_mqs_hw_params:
sound/soc/fsl/fsl_mqs.c:54:6: warning: variable bclk set but not used [-Wunused-but-set-variable]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20191006105522.58560-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If GPIOLIB is not set, building fails:
sound/soc/codecs/tas2770.c: In function tas2770_reset:
sound/soc/codecs/tas2770.c:38:3: error: implicit declaration of function gpiod_set_value_cansleep; did you mean gpio_set_value_cansleep? [-Werror=implicit-function-declaration]
gpiod_set_value_cansleep(tas2770->reset_gpio, 0);
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_set_value_cansleep
sound/soc/codecs/tas2770.c: In function tas2770_i2c_probe:
sound/soc/codecs/tas2770.c:749:24: error: implicit declaration of function devm_gpiod_get_optional; did you mean devm_regulator_get_optional? [-Werror=implicit-function-declaration]
tas2770->reset_gpio = devm_gpiod_get_optional(tas2770->dev,
^~~~~~~~~~~~~~~~~~~~~~~
devm_regulator_get_optional
sound/soc/codecs/tas2770.c:751:13: error: GPIOD_OUT_HIGH undeclared (first use in this function); did you mean GPIOF_INIT_HIGH?
GPIOD_OUT_HIGH);
^~~~~~~~~~~~~~
GPIOF_INIT_HIGH
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1a476abc72 ("tas2770: add tas2770 smart PA kernel driver")
Suggested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20191006104631.60608-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This probe function is only called if the device is backed by a DT node,
so switch this call to of_device_get_match_data() to reduce code size
and simplify a bit. This also avoids needing to reference a potentially
undefined variable because of_device_get_match_data() doesn't need to
know anything beyond the struct device to find the match table.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: <alsa-devel@alsa-project.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191004214334.149976-8-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We can have 2 dcpm-s with the same backend and frontend name
(capture + playback pair), this causes the following debugfs error
on Intel Bay Trail systems:
[ 298.969049] debugfs: Directory 'SSP2-Codec' with parent 'Baytrail Audio Port' already present!
This commit adds a ":playback" or ":capture" postfix to the debugfs dir
name fixing this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20191005212202.5206-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191004144931.3851-1-krzk@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_soc_limit_volume() is finding snd_kcontrol by using original coding,
but we already have snd_soc_card_get_kcontrol().
Let's use existing function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2y3afgd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
card->rtd_num is used to count rtd. Initialize it at
snd_soc_instantiate_card() is very natural and less confusion.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhijafgk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai / component related resources are created when component is
registered, and it will be freed when component was unregistered.
These resources are not re-used after that.
This means, we can use devm_xxx for dai / component, without
thinking about kfree().
This patch uses devm_xxx for these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736gbbu1a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA needs to setup shortname, longname, and driver.
These methods are very similar.
This patch adds new soc_setup_card_name() and setup these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874l0rbu1i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
soc_cleanup_card_resources() (a) which is paired function of
snd_soc_instantiate_card() (A) is calling soc_remove_dai_links() (*)
to remove card related resources, but it is breaking
add/remove balance (B)(b)(C)(c)(D)(d), in other words
these should be called from soc_cleanup_card_resources() (a)
from balance point of view.
More headacke is that it is using original removing method for
dai_link even though we already have snd_soc_remove_dai_link()
which is the function for it (d).
This patch removes snd_soc_remove_dai_links() and balance up code.
static void soc_remove_dai_links(...)
{
...
(b) soc_remove_link_dais(card);
(c) soc_remove_link_components(card);
for_each_card_links_safe(card, link, _link) {
...
/* it should use snd_soc_remove_dai_link() here */
(d) list_del(&link->list);
}
}
(a) static int soc_cleanup_card_resources(...)
{
...
/* remove and free each DAI */
(*) soc_remove_dai_links(card);
...
}
(A) static int snd_soc_instantiate_card(struct snd_soc_card *card)
{
...
/* add predefined DAI links to the list */
for_each_card_prelinks(card, i, dai_link)
(B) snd_soc_add_dai_link(card, dai_link);
...
/* probe all components used by DAI links on this card */
(C) ret = soc_probe_link_components(card);
...
/* probe all DAI links on this card */
(D) ret = soc_probe_link_dais(card);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zl7bu1r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rtd, rtd->dev, rtd->codec_dais are created by normal kzalloc(),
but we want to use devm_kzalloc() as much as possible.
Created rtd->dev is registered by device_register() at
soc_new_pcm_runtime(), and it will be freed at
soc_free_pcm_runtime() by device_unregister().
This means, if we can use devm_kzalloc(rtd->dev, xxx) for
rtd / rtd->codec_dais, all these are automatically freed
via soc_free_pcm_runtime().
This patch uses devm_kzalloc(rtd->dev, xxx) for rtd / rtd->codec_dais.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e5nbu1z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/tas2770.c:796:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Fixes: 1a476abc72 ("tas2770: add tas2770 smart PA kernel driver")
CC: Frank Shi <shifu0704@thundersoft.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20191001175504.ufhyxh66psrht42k@332d0cec05f4
Signed-off-by: Mark Brown <broonie@kernel.org>
If rockchip_pcm_platform_register() fails, e.g. upon deferring to wait
for an absent DMA channel, we return without disabling RPM, which makes
subsequent re-probe attempts scream with errors about the unbalanced
enable. Don't do that.
Fixes: ebb75c0bdb ("ASoC: rockchip: i2s: Adjust devm usage")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/bcb12a849a05437fb18372bc7536c649b94bdf07.1570029862.git.robin.murphy@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
User space always expects to be able to read ALSA controls, so ensure
no kcontrols are generated without an appropriate READ flag. In the case
of a read of such a control zeros will be returned.
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191002084240.21589-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename arndale_rt5631.c to just arnddale.c as we support other CODECs
than RT5631. While at it replace spaces in Kconfig with tabs.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20191002105652.24821-3-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Arndale boards come with different types of the audio daughter
board. In order to support the WM1811 one we add new definition of
an ASoC card which will be registered when the driver matches on
"samsung,arndale-wm1811" compatible. There is no runtime detection of
the audio daughter board type at the moment, compatible string of the
audio card needs to be adjusted in DT, e.g. by the bootloader,
depending on actual audio board (CODEC) used.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20191002105652.24821-2-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is only one DAI link so we can drop an unnecessary loop statement.
Use card->dai_link in place of direct static arndale_rt5631_dai[] array
dereference as a prerequisite for adding support for other CODECs.
Unnecessary assignment of dai_link->codecs->name to NULL is removed.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20191002105652.24821-1-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Helps with FW debug as it provides DSP IPC processing context.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch prevents the reset of host period bytes
and uses no_stream_position to record requests
for stream position.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fw_ready should be a mandatory op. Make sure fw_ready ops is set
during probe.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add config option to prevent DSP entering D3 after any FW exception.
This can then be used to dump FW context for debug.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In a number of debug cases, the DMA-based trace can add problems
(e.g. with HDaudio channel allocation). It also generates additional
traffic on the bus and if the DMA handling is unreliable will prevent
audio use-cases from working normally. Using the trace also requires
tools to be installed on the target.
The trace can be instead handled as dynamic debug. We can use a
Kconfig to force the trace to be enabled in all cases, or use a module
parameter to enable it on a need-basis, e.g. by setting "options
snd_sof sof_debug=0x1" in a /etc/modprobe.d file.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When removing sof module the support_button_press function will oops
because hp_jack pointer is not checked for NULL. So add a check to fix
this.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927201408.925-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When removing sof module the rt5682 jack handler will oops
if jack detection is not disabled. So add remove function,
which disables the jack detection.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927201408.925-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a known issue on some Intel platforms which causes
pause/release to run into xrun's during capture usecases.
The suggested workaround to address the issue is to
disable the entry of lower power L1 state in the physical
DMI link when there is a capture stream open.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW mailbox offset was not set before use and HDR size was not validated.
Fix this.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "snd_pcm_substream" handle was not initialized properly
in hda-loader.c for firmware load.
When the HDA DMAs were used to load the firmware,
the interrupts related to firmware load also triggered
calls to snd_sof_pcm_period_elapsed() on a non-existent ALSA
PCM stream.
This caused runtime kernel warnings from
pcm_lib.c:snd_pcm_period_elapsed().
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The old STOP sequence is: 1. stop DMA 2. send STOP ipc
If delay happen before the steps 1 and 2, the DMA buffer will be empty in
short time and cause pipeline xrun then stop the pipeline.
Then the step 2 ipc stop will return error as pipeline is already stopped.
Suggested change to avoid the issue is to switch the order of steps 1 and 2
for the stop sequence.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a bug in sof_pcm_hw_free() where some cleanup actions were
skipped if STREAM_PCM_FREE IPC was already successfully sent to
DSP when the stream was stopped or suspended. This is incorrect
as hw_free should clean up also other resources, including pcm
lib page allocations, period elapsed work queue and call to
platform hw_free.
Fixes: c29d96c3b9b4 ("ASoC: SOF: reset DMA state in prepare")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are using sof_parse_word_tokens() to parse tokens with
bool/byte/short/word tuple types, here add the missing check, to fix the
parsing failure at byte/bool tuple types.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we fail to boot the firmware, we encounter a kernel oops in
hda_dsp_get_registers(), which is called conditionally in
hda_dsp_dump() when the sdev_>boot_complete flag is set.
Setting this flag _after_ dumping the data fixes the issue and does
not change the programming flow.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix potential NULL pointer dereference for alg_region in
wm_adsp_buffer_parse_legacy. In practice this can never happen as
loading the firmware should have failed at the wm_adsp2_setup_algs
stage, however probably better for the code to be robust against
future changes and this is more helpful for static analysis.
Signed-off-by: Li Xu <li.xu@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191001130911.19238-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Below Oops is caused in a system which uses ACPI instead of device node:
of_get_named_gpiod_flags: can't parse 'maxim,reset-gpio' property of node '(null)[0]'
BUG: kernel NULL pointer dereference, address: 0000000000000010
This patch avoids NULL pointer deferencing by adding a check before parsing
and initializes to make reset-gpio pin as invalid.
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Link: https://lore.kernel.org/r/1569702150-11976-1-git-send-email-sathyanarayana.nujella@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On stream stop currently we stop the DMA first followed by the CPU DAI.
This can cause underflow (playback) or overflow (capture) on the DAI side
as the DMA is no longer feeding data while the DAI is still active.
It can be observed easily if the DAI side does not have FIFO (or it is
disabled) to survive the time while the DMA is stopped, but still can
happen on relatively slow CPUs when relatively high sampling rate is used:
the FIFO is drained between the time the DMA is stopped and the DAI is
stopped.
It can only fixed by using different sequence within trigger for 'stop' and
'start':
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
Trigger order: dai_link, DMA, CPU DAI then the codec
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
Trigger order: codec, CPU DAI, DMA then dai_link
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927071646.22319-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is error "aplay: pcm_write:2023: write error: Input/output error"
on i.MX8QM/i.MX8QXP platform for S24_3LE format.
In i.MX8QM/i.MX8QXP, the DMA is EDMA, which don't support 24bit
sample, but we didn't add any constraint, that cause issues.
So we need to query the caps of dma, then update the hw parameters
according to the caps.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/b6a4de2bbf960ef291ee902afe4388bd0fc1d347.1569493933.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When set the runtime hardware parameters, we may need to query
the capability of DMA to complete the parameters.
This patch is to Extract this operation from
dmaengine_pcm_set_runtime_hwparams function to a separate function
snd_dmaengine_pcm_refine_runtime_hwparams, that other components
which need this feature can call this function.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/d728f65194e9978cbec4132b522d4fed420d704a.1569493933.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASRC support 24bit/16bit/8bit input width, which is
data width, not slot width.
For the S20_3LE format, the data with is 20bit, slot width
is 24bit, if we set ASRMCR1n.IWD to be 24bits, the result
is the volume is lower than expected, it likes 24bit data
right shift 4 bits
So replace S20_3LE with S24_3LE in supported list and add S8
format in TX supported list
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/45a7c383f43cc1dd9d0934846447aee653278c03.1569493933.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_format_t is more formal than enum asrc_word_width, which has
two property, width and physical width, which is more accurate than
enum asrc_word_width. So it is better to use in(out)put_format
instead of in(out)put_word_width.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/7937c1404ee327ce141cb03b3575b02ea01a740c.1569493933.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The adau1761 has a automatic level control block that can adjust the gain
for the differential input PGA. This patch adds ALSA controls for enabling
and changing the parameter settings for the ALC.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20190926115012.24049-2-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PGA Slew Time control allows to configure the rate with which the PGA
gain control ramps up/down to the target setting.
The PGA slew control is done via the ALC Control 0 register. There are 2
bits on that reg, that control PGA slew time, while the other bits control
parts of the ALC (automatic level control) block.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20190926115012.24049-1-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For a sound card ignore_machine means that existing FEs links should be
ignored and existing BEs links should be overridden with some information
from the matching component driver.
Current code make some confusions about this so fix it!
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20190925183358.11955-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we can use devm_kzalloc(rtd->dev, xxx) for rtdcom,
we don't need to call snd_soc_rtdcom_del_all() for kfree().
This patch uses devm_kzalloc(rtd->dev, xxx) for rtdcom,
and remove snd_soc_rtdcom_del_all().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zlyf7ln.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch allocs dev first at soc_new_pcm_runtime().
This is prepare for rtd->dev, rtd->codec_dais alloc cleanup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e6ef7m1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"rtd" is handled by soc_xxx_pcm_runtime(), and
"rtd->dev" is handled by soc_rtd_xxx().
There is no reason to separate these, and it makes code complex.
We can free these in the same time.
Here soc_rtd_free() (A) which frees rtd->dev is called from
soc_remove_link_dais() many times (1).
Then, it is using dev_registered flags to avoid multi kfree() (2).
This is no longer needed if we can merge these functions.
static void soc_remove_link_dais(...)
{
...
(1) for_each_comp_order(order) {
(1) for_each_card_rtds(card, rtd) {
(A) soc_rtd_free(rtd);
...
}
}
}
(A) static void soc_rtd_free(...)
{
(2) if (rtd->dev_registered) {
/* we don't need to call kfree() for rtd->dev */
device_unregister(rtd->dev);
(2) rtd->dev_registered = 0;
}
}
This patch merges soc_rtd_free() into soc_free_pcm_runtime().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878squf7oi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"rtd" is handled by soc_xxx_pcm_runtime(), and
"rtd->dev" is handled by soc_rtd_xxx().
There is no reason to separate these, and it makes code complex.
We can create these in the same time.
This patch merges soc_rtd_init() into soc_new_pcm_runtime().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a7baf7pz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_new_pcm_runtime() allocs rtd and rtd->codec_dais.
This patch allocs both first, and setup these after that.
This is prepare for soc_new_pcm_runtime() cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blvqf7qz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC is calling list_del(&rtd->list) at (1)
static void soc_remove_pcm_runtimes(...)
{
...
for_each_card_rtds_safe(card, rtd, _rtd) {
(1) list_del(&rtd->list);
(2) soc_free_pcm_runtime(rtd);
}
...
}
But, we will call soc_free_pcm_runtime() after that (2).
&rtd->list is connected at soc_new_pcm_runtime(),
Thus, it should be disconnected at soc_free_pcm_runtime().
This patch calls list_del(&rtd->list) at soc_free_pcm_runtime().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87d0g6f7s5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have soc_new_pcm_runtime() which allocs rtd and its related memory,
and soc_add_pcm_runtime() which connects rtd to card.
But we don't need to separate these, we can alloc and connect rtd
in the same time.
Current implementation is just makes code complex.
This patch merges these into one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ef0mf7sl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves soc_free_pcm_runtime() next to soc_new_pcm_runtime().
This is prepare for soc_xxx_pcm_runtime() cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ftl2f7sx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As an intermediate step before covering the clocking subsystem
of the CODEC entirely by the clk API add handling of external CODEC's
master clocks in DAPM events when the AIFn clocks are sourced directly
from MCLKn; when FLLn are used we enable/disable respective MCLKn
before/after FLLn is enabled/disabled.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20190920130218.32690-5-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the set_sysclk() handler so we also set frequency of the MCLK1,
MCLK2 clocks through clk API when those clocks are specified in DT.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20190920130218.32690-4-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify this function implementation by using a known wrapper function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/8f7cf483-6ab3-d00f-5606-863e9f5b31fc@web.de
Signed-off-by: Mark Brown <broonie@kernel.org>
As of commit 648e921888 ("clk: x86: Stop marking clocks as
CLK_IS_CRITICAL"), the cht_bsw_rt5645 driver needs to enable the clock
it's using for the codec's mclk. It does this from commit 7735bce05a
("ASoC: Intel: boards: use devm_clk_get() unconditionally"), enabling
pmc_plt_clk_3. However, Strago family Chromebooks use pmc_plt_clk_0 for
the codec mclk, resulting in white noise with some digital microphones.
Add a DMI-based quirk for Strago family Chromebooks to use pmc_plt_clk_0
instead - mirroring the changes made to cht_bsw_max98090_ti in
commit a182ecd380 ("ASoC: intel: cht_bsw_max98090_ti: Add quirk for
boards using pmc_plt_clk_0") and making use of the existing
dmi_check_system() call and related infrastructure added in
commit 22af29114e ("ASoC: Intel: cht-bsw-rt5645: add quirks for
SSP0/AIF1/AIF2 routing").
Signed-off-by: Sam McNally <sammc@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190917054933.209335-1-sammc@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
MQS (medium quality sound), is used to generate medium quality
audio via a standard digital output pin. It can be used to
connect stereo speakers or headphones simply via power amplifier
stages without an additional DAC chip. It only accepts 2-channel,
LSB-valid 16bit, MSB shift-out first, frame sync asserting with
the first bit of the frame, data shifted with the posedge of
bit clock, 44.1 kHz or 48 kHz signals from SAI1 in left justified
format; and it provides the SNR target as no more than 20dB for
the signals below 10 kHz. The signals above 10 kHz will have
worse THD+N values.
MQS provides only simple audio reproduction. No internal pop,
click or distortion artifact reduction methods are provided.
The MQS receives the audio data from the SAI1 Tx section.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/74dfc73a92d2df4213225abe7d2a3db82672fe0f.1568367274.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "template.id" variable is an enum and in this context GCC will
treat it as an unsigned int so it can never be less than zero.
Fixes: 8a9782346d ("ASoC: topology: Add topology core")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20190925110624.GR3264@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
A few small remaining wrap-up for this merge window.
Most of patches are device-specific (HD-audio and USB-audio quirks,
FireWire, pcm316a, fsl, rsnd, Atmel, and TI fixes), while there is
a simple fix (actually two commits) for ASoC core.
-----BEGIN PGP SIGNATURE-----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=mOJY
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few small remaining wrap-up for this merge window.
Most of patches are device-specific (HD-audio and USB-audio quirks,
FireWire, pcm316a, fsl, rsnd, Atmel, and TI fixes), while there is a
simple fix (actually two commits) for ASoC core"
* tag 'sound-fix-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add DSD support for EVGA NU Audio
ALSA: hda - Add laptop imic fixup for ASUS M9V laptop
ASoC: ti: fix SND_SOC_DM365_VOICE_CODEC dependencies
ASoC: pcm3168a: The codec does not support S32_LE
ASoC: core: use list_del_init and move it back to soc_cleanup_component
ALSA: hda/realtek - PCI quirk for Medion E4254
ALSA: hda - Apply AMD controller workaround for Raven platform
ASoC: rsnd: do error check after rsnd_channel_normalization()
ASoC: atmel_ssc_dai: Remove wrong spinlock usage
ASoC: core: delete component->card_list in soc_remove_component only
ASoC: fsl_sai: Fix noise when using EDMA
ALSA: usb-audio: Add Hiby device family to quirks for native DSD support
ALSA: hda/realtek - Fix alienware headset mic
ALSA: dice: fix wrong packet parameter for Alesis iO26
There were a couple places where the return value wasn't assigned so the
error handling wouldn't trigger.
Fixes: 5c0769af4c ("ASoC: soc-dai: add snd_soc_dai_bespoke_trigger()")
Fixes: 95aef35533 ("ASoC: soc-dai: add snd_soc_dai_trigger()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20190923142257.GB31251@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of WM1811 device there are currently being registered controls
referring to registers not existing on that device.
It has been noticed when getting values of "AIF1ADC2 Volume", "AIF1DAC2
Volume" controls was failing during ALSA state restoring at boot time:
"amixer: Mixer hw:0 load error: Device or resource busy"
Reading some registers through I2C was failing with EBUSY error and
indeed these registers were not available according to the datasheet.
To fix this controls not available on WM1811 are moved to a separate
array and registered only for WM8994 and WM8958.
There are some further differences between WM8994 and WM1811,
e.g. registers 603h, 604h, 605h, which are not covered in this patch.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20190920130218.32690-2-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ensure there is no OF node references kept when the driver
is removed/unbound.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20190920130218.32690-3-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A small smattering of ASoC fixes for v5.4 - nothing too exciting
here, all small standalone things.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl2JCfITHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0GP1B/wImLx7u5jHiiAAzeW9kig7R+m91/wm
+QMwcguVLsrTiI8qz2YnH8bMEbLU66bHsy7faKl5hG1r6vnSEct6MTw236eM7l5/
XqLRmnn6W2GtxnpShL/eL3F73i7HYdSUBNsdeV5V9loTMJKehDJ/AqK7k+eMZt0y
5xxEpkiTZilu1ue+GwWN2bhKHu4HnBmESkmbO2Adsws1ZKUNfuhye+IkorllJFeG
v9FmP8j37Z5YKMAUaKmdy4uaecvwJZVpWNuaNNS7A02+6OpeIdrYtNUbj4dnPqGF
U+mOs+Xsnsv09ykBEBdFBk50sKjZnIMeO+cxz/tjT8nL9QI+LCFonf72
=Ijmx
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.4-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.4
A small smattering of ASoC fixes for v5.4 - nothing too exciting
here, all small standalone things.
- boot_mem_map is removed, providing a nice cleanup made possible by the
recent removal of bootmem.
- Some fixes to atomics, in general providing compiler barriers for
smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or
MIPS32 systems using cmpxchg64().
- Conversion to the new generic VDSO infrastructure courtesy of Vincenzo
Frascino.
- Removal of undefined behavior in set_io_port_base(), fixing the
behavior of some MIPS kernel configurations when built with recent
clang versions.
- Initial MIPS32 huge page support, functional on at least Ingenic SoCs.
- pte_special() is now supported for some configurations, allowing among
other things generic fast GUP to be used.
- Miscellaneous fixes & cleanups.
And platform specific changes:
- Major improvements to Ingenic SoC support from Paul Cercueil, mostly
enabled by the inclusion of the new TCU (timer-counter unit) drivers
he's spent a very patient year or so working on. Plus some fixes for
X1000 SoCs from Zhou Yanjie.
- Netgear R6200 v1 systems are now supported by the bcm47xx platform.
- DT updates for BMIPS, Lantiq & Microsemi Ocelot systems.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXYaqpRUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN2JUQD+PQGFIlq9bo/3vLyqsXJffm+DhwVQ
4WSCSeN5brPkO8EA/153sRJBlRtG+KK5p9f7WYKUuBfbcEawuc1uwmKuy7cG
=lWlM
-----END PGP SIGNATURE-----
Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:
"Main MIPS changes:
- boot_mem_map is removed, providing a nice cleanup made possible by
the recent removal of bootmem.
- Some fixes to atomics, in general providing compiler barriers for
smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs
or MIPS32 systems using cmpxchg64().
- Conversion to the new generic VDSO infrastructure courtesy of
Vincenzo Frascino.
- Removal of undefined behavior in set_io_port_base(), fixing the
behavior of some MIPS kernel configurations when built with recent
clang versions.
- Initial MIPS32 huge page support, functional on at least Ingenic
SoCs.
- pte_special() is now supported for some configurations, allowing
among other things generic fast GUP to be used.
- Miscellaneous fixes & cleanups.
And platform specific changes:
- Major improvements to Ingenic SoC support from Paul Cercueil,
mostly enabled by the inclusion of the new TCU (timer-counter unit)
drivers he's spent a very patient year or so working on. Plus some
fixes for X1000 SoCs from Zhou Yanjie.
- Netgear R6200 v1 systems are now supported by the bcm47xx platform.
- DT updates for BMIPS, Lantiq & Microsemi Ocelot systems"
* tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits)
MIPS: Detect bad _PFN_SHIFT values
MIPS: Disable pte_special() for MIPS32 with RiXi
MIPS: ralink: deactivate PCI support for SOC_MT7621
mips: compat: vdso: Use legacy syscalls as fallback
MIPS: Drop Loongson _CACHE_* definitions
MIPS: tlbex: Remove cpu_has_local_ebase
MIPS: tlbex: Simplify r3k check
MIPS: Select R3k-style TLB in Kconfig
MIPS: PCI: refactor ioc3 special handling
mips: remove ioremap_cachable
mips/atomic: Fix smp_mb__{before,after}_atomic()
mips/atomic: Fix loongson_llsc_mb() wreckage
mips/atomic: Fix cmpxchg64 barriers
MIPS: Octeon: remove duplicated include from dma-octeon.c
firmware: bcm47xx_nvram: Allow COMPILE_TEST
firmware: bcm47xx_nvram: Correct size_t printf format
MIPS: Treat Loongson Extensions as ASEs
MIPS: Remove dev_err() usage after platform_get_irq()
MIPS: dts: mscc: describe the PTP ready interrupt
MIPS: dts: mscc: describe the PTP register range
...
SND_SOC_DM365_VOICE_CODEC is a 'bool' option in a choice statement,
meaning it cannot be set to =m, but it selects two other drivers
that we may want to be loadable modules after all:
WARNING: unmet direct dependencies detected for SND_SOC_CQ0093VC
Depends on [m]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m]
Selected by [y]:
- SND_SOC_DM365_VOICE_CODEC [=y] && <choice>
Selected by [m]:
- SND_SOC_ALL_CODECS [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMPILE_TEST [=y]
Add an intermediate symbol that sets SND_SOC_CQ0093VC and
MFD_DAVINCI_VOICECODEC to =m if SND_SOC=m.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190920075046.3210393-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
24 bits is supported in all modes and 16 bit only when the codec is slave
and the DAI is set to RIGHT_J.
Remove the unsupported sample format.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190919071652.31724-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit a0a4bf57a9 ("ASoC: core: delete component->card_list in soc_remove_component only")
was trying to fix a kernel oops when list_del was called twice without
re-init the list. Use list_del_init() can solve it, too. Besides, it
will be more readable if we cleanup all component related resource at
soc_cleanup_component().
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20190918133131.15045-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SSI need to use rsnd_channel_normalization() for TDM-split mode,
thus, channel check need to do after that.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874l1aw39d.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A potential bug was reported in the email "[BUG] atmel_ssc_dai: a
possible sleep-in-atomic bug in atmel_ssc_shutdown"[1]
Indeed in the function atmel_ssc_shutdown() free_irq() was called in a
critical section protected by spinlock.
However this spinlock is only used in atmel_ssc_shutdown() and
atmel_ssc_startup() functions. After further analysis, it occurred that
the call to these function are already protected by mutex used on the
calling functions.
Then we can remove the spinlock which will fix this bug as a side
effect. Thanks to this patch the following message disappears:
"BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:909"
[1]: https://www.spinics.net/lists/alsa-devel/msg71286.html
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20190918100344.23629-1-gregory.clement@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXYAIeQAKCRBiEGxRG/Sl
2/SzAQDEnoNxzV/R5kWFd+2kmFeY3cll0d99KMrWJ8om+kje6QD/cXxZHzFm+T1L
UPF66k76oOODV7cyndjXnTnRXbeCRAM=
=Szby
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this cycle we've finally managed to contribute the patch set
sorting out LED naming issues. Besides that there are many changes
scattered among various LED class drivers and triggers.
LED naming related improvements:
- add new 'function' and 'color' fwnode properties and deprecate
'label' property which has been frequently abused for conveying
vendor specific names that have been available in sysfs anyway
- introduce a set of standard LED_FUNCTION* definitions
- introduce a set of standard LED_COLOR_ID* definitions
- add a new {devm_}led_classdev_register_ext() API with the
capability of automatic LED name composition basing on the
properties available in the passed fwnode; the function is
backwards compatible in a sense that it uses 'label' data, if
present in the fwnode, for creating LED name
- add tools/leds/get_led_device_info.sh script for retrieving LED
vendor, product and bus names, if applicable; it also performs
basic validation of an LED name
- update following drivers and their DT bindings to use the new LED
registration API:
- leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt
Other LED class improvements:
- replace {devm_}led_classdev_register() macros with inlines
- allow to call led_classdev_unregister() unconditionally
- switch to use fwnode instead of be stuck with OF one
LED triggers improvements:
- led-triggers:
- fix dereferencing of null pointer
- fix a memory leak bug
- ledtrig-gpio:
- GPIO 0 is valid
Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
more complete driver exists, based on a generic driver for the AMD
SOCs gpio-controller, supporting LEDs as well other devices:
- drop profile field from priv data
- drop iosize field from priv data
- drop enum_apu_led_platform_types
- drop superseeded apu2/3 led support
- add pr_fmt prefix for better log output
- fix error message on probing failure
Other misc fixes and improvements to existing LED class drivers:
- leds-ns2, leds-max77650:
- add of_node_put() before return
- leds-pwm, leds-is31fl32xx:
- use struct_size() helper
- leds-lm3697, leds-lm36274, leds-lm3532:
- switch to use fwnode_property_count_uXX()
- leds-lm3532:
- fix brightness control for i2c mode
- change the define for the fs current register
- fixes for the driver for stability
- add full scale current configuration
- dt: Add property for full scale current.
- avoid potentially unpaired regulator calls
- move static keyword to the front of declarations
- fix optional led-max-microamp prop error handling
- leds-max77650:
- add of_node_put() before return
- add MODULE_ALIAS()
- Switch to fwnode property API
- leds-as3645a:
- fix misuse of strlcpy
- leds-netxbig:
- add of_node_put() in netxbig_leds_get_of_pdata()
- remove legacy board-file support
- leds-is31fl319x:
- simplify getting the adapter of a client
- leds-ti-lmu-common:
- fix coccinelle issue
- move static keyword to the front of declaration
- leds-syscon:
- use resource managed variant of device register
- leds-ktd2692:
- fix a typo in the name of a constant
- leds-lp5562:
- allow firmware files up to the maximum length
- leds-an30259a:
- fix typo
- leds-pca953x:
- include the right header"
* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
leds: lm3532: Fix optional led-max-microamp prop error handling
led: triggers: Fix dereferencing of null pointer
leds: ti-lmu-common: Move static keyword to the front of declaration
leds: lm3532: Move static keyword to the front of declarations
leds: trigger: gpio: GPIO 0 is valid
leds: pwm: Use struct_size() helper
leds: is31fl32xx: Use struct_size() helper
leds: ti-lmu-common: Fix coccinelle issue in TI LMU
leds: lm3532: Avoid potentially unpaired regulator calls
leds: syscon: Use resource managed variant of device register
leds: Replace {devm_}led_classdev_register() macros with inlines
leds: Allow to call led_classdev_unregister() unconditionally
leds: lm3532: Add full scale current configuration
dt: lm3532: Add property for full scale current.
leds: lm3532: Fixes for the driver for stability
leds: lm3532: Change the define for the fs current register
leds: lm3532: Fix brightness control for i2c mode
leds: Switch to use fwnode instead of be stuck with OF one
leds: max77650: Switch to fwnode property API
led: triggers: Fix a memory leak bug
...
As shown in diffstat and logs, it was again a busy development
cycle at this time, too. The most significant changes are still
on-going refactoring / modernization works for ASoC core and
drivers, but there are lots of other changes as well. Here we go,
some highlights below:
ASoC:
- Quite lots of cleanup / refactoring of ASoC core and APIs;
most of them are systematic, but also including cleanups and
modernization
- A bulk of updates for some ASoC platforms, Freescale, sunxi and
Intel SST/SOF
- Initial support for Sound Open Firmware on i.MX8
- Removal of deprecated w90x900 and nuc900 drivers
- New support for Cirrus Logic CS47L15 and CS47L92, Freescale i.MX
7ULP and 8MQ, Meson G12A and NXP UDA1334
USB-audio:
- More validations of descriptor units for hardening against bugs
reported by fuzzers
- PCM device assignment workaround for a past call-order change
- Scarlett Gen2 mixer interface, a few more more quirks
HD-audio:
- Support for audio component with AMD/ATI and Nvidia HDMI codecs
- Clean up HD-audio core and remove indirect access ops for Intel SOF
- DMIC detection at probe; it would make systems automatically falling
back to SST/SOF driver on devices that need DMIC handling.
Needs a new Kconfig to set, and beware that it's still new and a bit
experimental
FireWire:
- Lots of code refactoring and cleanups
-----BEGIN PGP SIGNATURE-----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=/+1Q
-----END PGP SIGNATURE-----
Merge tag 'sound-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"As shown in diffstat and logs, it was again a busy development cycle
at this time, too. The most significant changes are still on-going
refactoring / modernization works for ASoC core and drivers, but there
are lots of other changes as well. Here we go, some highlights below:
ASoC:
- Quite a lot of cleanup / refactoring of ASoC core and APIs; most of
them are systematic, but also including cleanups and modernization
- A bulk of updates for some ASoC platforms, Freescale, sunxi and
Intel SST/SOF
- Initial support for Sound Open Firmware on i.MX8
- Removal of deprecated w90x900 and nuc900 drivers
- New support for Cirrus Logic CS47L15 and CS47L92, Freescale i.MX
7ULP and 8MQ, Meson G12A and NXP UDA1334
USB-audio:
- More validations of descriptor units for hardening against bugs
reported by fuzzers
- PCM device assignment workaround for a past call-order change
- Scarlett Gen2 mixer interface, a few more more quirks
HD-audio:
- Support for audio component with AMD/ATI and Nvidia HDMI codecs
- Clean up HD-audio core and remove indirect access ops for Intel SOF
- DMIC detection at probe; it would make systems automatically
falling back to SST/SOF driver on devices that need DMIC handling.
Needs a new Kconfig to set, and beware that it's still new and a
bit experimental
FireWire:
- Lots of code refactoring and cleanups"
* tag 'sound-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (521 commits)
ASoC: sdm845: remove unneeded semicolon
ASoC: fsl_sai: Implement set_bclk_ratio
ASoC: dmaengine: Replace strncpy() with strscpy_pad() for pcm->name
ASoC: wcd9335: remove redundant use of ret variable
ALSA: firewire-tascam: check intermediate state of clock status and retry
ALSA: firewire-tascam: handle error code when getting current source of clock
ASoC: hdmi-codec: Add an op to set callback function for plug event
ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFF
ASoC: rt5677: Remove magic number register writes
ASoC: soc-core: self contained soc_unbind_aux_dev()
ASoC: soc-core: add soc_unbind_aux_dev()
ASoC: soc-core: self contained soc_bind_aux_dev()
ASoC: soc-core: move soc_probe_link_dais() next to soc_remove_link_dais()
ASoC: soc-core: self contained soc_probe_link_dais()
ASoC: soc-core: add new soc_link_init()
ASoC: soc-core: move soc_probe_dai() next to soc_remove_dai()
ASoC: soc-core: self contained soc_remove_link_dais()
ASoC: soc-core: self contained soc_remove_link_components()
ASoC: soc-core: self contained soc_probe_link_components()
ASoC: rt1308: make array pd static const, makes object smaller
...
We add component->card_list in the end of soc_probe_component(). In
other words, component->card_list will not be added if there is an
error in the soc_probe_component() function. So we can't delete
component->card_list in the error handling of soc_probe_component().
Fixes: 22d1423187 ("ASoC: soc-core: add soc_cleanup_component()")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190916210353.6318-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
EDMA requires the period size to be multiple of maxburst. Otherwise the
remaining bytes are not transferred and thus noise is produced.
We can handle this issue by adding a constraint on
SNDRV_PCM_HW_PARAM_PERIOD_SIZE to be multiple of tx/rx maxburst value.
Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190913192807.8423-2-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is to allow machine drivers to set a certain bitclk rate
which might not be exactly rate * frame size.
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190830215910.31590-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While it is safe to use strncpy in this case, the advice is to move to
strscpy or strscpy_pad.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190911083331.16801-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All these functions declares and initializes variable ret with
'0' and without modifying 'ret' variable, it is returned.
This patch removes this redundancy and returns '0' directly.
Signed-off-by: Saiyam Doshi <saiyamdoshi.in@gmail.com>
Link: https://lore.kernel.org/r/20190909174541.GA22718@SD
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an op in hdmi_codec_ops so codec driver can register callback
function to handle plug event.
Driver in DRM can use this callback function to report connector status.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20190717083327.47646-2-cychiang@chromium.org
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of clearing RT5677_PWR_ANLG2 (MX-64h) to 0 at SND_SOC_BIAS_OFF,
we only clear the RT5677_PWR_CORE bit which is set at SND_SOC_BIAS_PREPARE.
MICBIAS control bits are left unchanged.
This fixed the bug where if MICBIAS1 widget is forced on, MICBIAS
control bits will be cleared at suspend and never turned back on again,
since DAPM thinks the widget is always on.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20190906194636.217881-3-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to simplify understanding what register values are being
written to the codec for debugging more advanced features (such as
hotwording) it is best to remove magic numbers
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20190906194636.217881-2-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_unbind_aux_dev() implementation is very half,
thus it is very unreadable.
for_each_comp_order(order) {
for_each_card_auxs_safe(card, comp, _comp) {
(1) if (comp->driver->remove_order == order) {
...
=> soc_unbind_aux_dev(comp);
}
}
soc_unbind_aux_dev() itself is not related to remove_order (1).
And, it is called from soc_remove_aux_devices(), even though
its paired function soc_bind_aux_dev() is called from
snd_soc_instantiate_card().
It is very unbalance, and very difficult to understand.
This patch do
1) update soc_bind_aux_dev() to self contained
2) call it from soc_cleanup_card_resources() to make up balance
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r24wor0z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
soc-core.c has soc_bind_aux_dev(), but, there is no its paired
soc_unbind_aux_dev().
This patch adds soc_unbind_aux_dev().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgpcor14.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_bind_aux_dev() implementation is very half,
thus it is very unreadable.
for_each_card_pre_auxs(xxx) {
=> ret = soc_bind_aux_dev(xxx);
...
}
This patch does all for_each_xxx() under soc_bind_aux_dev(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tv9sor1b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
This patch moves soc_probe_link_dais() next to soc_remove_link_dais()
which is paired function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9u8or1g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_probe_link_dais() implementation is very half,
thus it is very difficult to read.
for_each_comp_order(xxx) {
for_each_card_rtds(xxx)
=> soc_probe_link_dais(xxx);
}
This patch does all for_each_xxx() under soc_probe_link_dais(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87woeoor1m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_probe_link_dais() (1) is called under probe_order (2),
and it will initialize dai_link related settings at *Last* turn (3)(B).
It is very complex code.
static int soc_probe_link_dais(..., order)
{
(A) /* probe DAIs here */
...
(3) if (order != SND_SOC_COMP_ORDER_LAST)
return 0;
(B) /* initialize dai_link related settings */
...
}
static int snd_soc_instantiate_card(...)
{
...
(2) for_each_comp_order(order) {
for_each_card_rtds(...) {
(1) ret = soc_probe_link_dais(..., order);
}
}
}
This patch separes soc_probe_link_dais() into "DAI probe" portion (A),
and dai_link settings portion (B).
The later is named as soc_link_init() by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2z4or1r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
This patch moves soc_probe_dai() next to soc_remove_dai() which is
paired function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhjkor1x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_remove_link_dais() implementation is very half,
thus it is very difficult to read.
for_each_comp_order(xxx) {
for_each_card_rtds(xxx)
=> soc_remove_link_dais(xxx);
}
This patch does all for_each_xxx() under soc_remove_link_dais(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rwwq5mm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_remove_link_components() implementation is very half,
thus it is very difficult to read.
for_each_comp_order(xxx) {
for_each_card_rtds(xxx)
=> soc_remove_link_components(xxx);
}
This patch does all for_each_xxx() under soc_remove_link_components(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736hcq5ms.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_probe_link_components() implementation is very half,
thus it is very difficult to read.
for_each_comp_order(xxx) {
for_each_card_rtds(xxx) {
=> ret = soc_probe_link_components(xxx);
...
}
}
This patch does all for_each_xxx() under soc_probe_link_components(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874l1sq5mx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 82 bytes.
Before:
text data bss dec hex filename
26548 7288 64 33900 846c sound/soc/codecs/rt1308.o
After:
text data bss dec hex filename
26370 7384 64 33818 841a sound/soc/codecs/rt1308.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907074634.22144-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 93 bytes.
Before:
text data bss dec hex filename
38961 9784 64 48809 bea9 sound/soc/codecs/rt1305.o
After:
text data bss dec hex filename
38804 9848 64 48716 be4c sound/soc/codecs/rt1305.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907074156.21907-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 100 bytes.
Before:
text data bss dec hex filename
51463 13016 128 64607 fc5f sound/soc/codecs/rt1011.o
After:
text data bss dec hex filename
51299 13080 128 64507 fbfb sound/soc/codecs/rt1011.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907073717.21632-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch set 0Hz to sysclk when shutdown the card.
Some codecs set rate constraints that derives from sysclk. This
mechanism works correctly if machine drivers give fixed frequency.
But simple-audio and audio-graph card set variable clock rate if
'mclk-fs' property exists. In this case, rate constraints will go
bad scenario. For example a codec accepts three limited rates
(mclk / 256, mclk / 384, mclk / 512).
Bad scenario as follows (mclk-fs = 256):
- Initialize sysclk by correct value (Ex. 12.288MHz)
- Codec set constraints of PCM rate by sysclk
48kHz (1/256), 32kHz (1/384), 24kHz (1/512)
- Play 48kHz sound, it's acceptable
- Sysclk is not changed
- Play 32kHz sound, it's acceptable
- Set sysclk to 8.192MHz (= fs * mclk-fs = 32k * 256)
- Codec set constraints of PCM rate by sysclk
32kHz (1/256), 21.33kHz (1/384), 16kHz (1/512)
- Play 48kHz again, but it's NOT acceptable because constraints
do not allow 48kHz
So codecs treat 0Hz sysclk as signal of applying no constraints to
avoid this problem.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907174501.19833-1-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch ignores sysclk setting if it is 0Hz.
Some codecs treat 0Hz sysclk as signal of applying no constraints.
This driver does not have such feature but current implementation
outputs 'Failed to set mclk' error message if machine driver sets
0Hz sysclk to this driver.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907174332.19586-1-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the arrays on the stack but instead make them
static const. Makes the object code smaller by 37 bytes.
Before:
text data bss dec hex filename
16253 7200 0 23453 5b9d sound/soc/codecs/ad193x.o
After:
text data bss dec hex filename
16056 7360 0 23416 5b78 sound/soc/codecs/ad193x.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190906161404.1440-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch supports some type of machine drivers that set 0 to mclk
when sound device goes to idle state. After applied this patch,
sysclk == 0 means there is no constraint of sound rate and other
values will set constraints which is derived by sysclk setting.
Original code refuses sysclk == 0 setting. But some boards and SoC
(such as RockPro64 and RockChip I2S) has connected SoC MCLK out to
ES8316 MCLK in. In this case, SoC side I2S will choose suitable
frequency of MCLK such as fs * mclk-fs when user starts playing or
capturing.
Bad scenario as follows (mclk-fs = 256):
- Initialize sysclk by correct value (Ex. 12.288MHz)
- ES8316 set constraints of PCM rate by sysclk
48kHz (1/256), 32kHz (1/384), 30.720kHz (1/400),
24kHz (1/512), 16kHz (1/768), 12kHz (1/1024)
- Play 48kHz sound, it's acceptable
- Sysclk is not changed
- Play 32kHz sound, it's acceptable
- Set sysclk by 8.192MHz (= fs * mclk-fs = 32k * 256)
- ES8316 set constraints of PCM rate by sysclk
32kHz (1/256), 21.33kHz (1/384), 20.48kHz (1/400),
16kHz (1/512), 10.66kHz (1/768), 8kHz (1/1024)
- Play 48kHz again, but it's NOT acceptable because constraints
list does not allow 48kHz
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907163653.9382-2-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removes redundant null checks for optional MCLK clock.
And fix DT binding document for changing clock property to optional
from required.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907163653.9382-1-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 1137ceee76 ("ARM: OMAP1: ams-delta: Don't request unused
GPIOs"), on-board audio has appeared muted. It has been discovered that
believed to be unused GPIO pins "hookflash1" and "hookflash2" need to be
set low for audible sound in handsfree and handset mode respectively.
According to Amstrad E3 wiki, the purpose of both pins hasn't been
clearly identified. Original Amstrad software used to produce a high
pulse on them when the phone was taken off hook or recall was pressed.
With the current findings, we can assume the pins provide a kind of
audio mute function, separately for handset and handsfree operation
modes.
Commit 2afdb4c41d ("ARM: OMAP1: ams-delta: Fix audio permanently
muted") attempted to fix the issue temporarily by hogging the GPIO pin
"hookflash1" renamed to "audio_mute", however the fix occurred
incomplete as it restored audible sound only for handsfree mode.
Stop hogging that pin, rename the pins to "handsfree_mute" and
"handset_mute" respectively and implement appropriate DAPM event
callbacks for "Speaker" and "Earpiece" DAPM widgets.
Fixes: 1137ceee76 ("ARM: OMAP1: ams-delta: Don't request unused GPIOs")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190907111650.15440-1-jmkrzyszt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some tools use the snd_pcm_info_get_name() to try to identify PCMs or for
other purposes.
Currently it is left empty with the dmaengine-pcm, in this case copy the
pcm->id string as pcm->name.
For example IGT is using this to find the HDMI PCM for testing audio on it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reported-by: Arthur She <arthur.she@linaro.org>
Link: https://lore.kernel.org/r/20190906055524.7393-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When do compile test, if SND_SOC_SOF_OF is not set, we get:
sound/soc/sof/imx/imx8.o: In function `imx8_dsp_handle_request':
imx8.c:(.text+0xb0): undefined reference to `snd_sof_ipc_msgs_rx'
sound/soc/sof/imx/imx8.o: In function `imx8_ipc_msg_data':
imx8.c:(.text+0xf4): undefined reference to `sof_mailbox_read'
sound/soc/sof/imx/imx8.o: In function `imx8_dsp_handle_reply':
imx8.c:(.text+0x160): undefined reference to `sof_mailbox_read'
Make SND_SOC_SOF_IMX_TOPLEVEL always depends on SND_SOC_SOF_OF
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 202acc565a ("ASoC: SOF: imx: Add i.MX8 HW support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190905064400.24800-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the sm1, the TDMOUT number of input is extended and the
the gain enable bit moved to accommodate this extension
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-9-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TDMIN component, as it, has a maximum of 16 input. Depending on
the SoC, these may not all be connected.
Instead of decribing only the connected inputs of each SoC, describe
them all and let ASoC routing do the rest.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-6-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TODDR component, as it, has a maximum of 8 input. Depending on
the SoC, these may not all be connected or some input components may
not be supported
Instead of decribing only the connected inputs, describe them all
and let ASoC routing do the rest.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-5-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FRDDR component, as it, has a maximum of 8 outputs. Depending on
the SoC, these may not all be connected.
Instead of decribing only the connected outputs of each SoC, describe
them all and let ASoC routing do the rest.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reading out the link-name earlier and including it in the various error
messages makes it much more convenient to figure out what links have
unmet dependencies.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20190905040306.21399-1-bjorn.andersson@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Basically, driver which setups snd_soc_component_set_jack() need
to release it by themselves. But, as framework level robustness,
soc_remove_component() also releases it.
To avoid code reader confuse, this patch makes it clarify.
This patch makes it clarify.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zm8q5n8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190904083909.18804-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190904083412.18700-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190904082507.24300-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190904074833.23572-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch introduce clock property for MCLK master freq control.
Driver will set rate of MCLK master if set_sysclk is called and
changing sysclk by board driver.
[Modified slightly to apply without an earlier patch in the series due
to context diffs -- broonie]
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190903165322.20791-2-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC try to rebind Sound Card if Card/CPU/Codec/Platform
were unbinded and re-binded again.
But, Audio Graph Card might can't rebind again if user do for example
unbind CPU or Codec driver
bind CPU or Codec driver
Because Audio Graph Card is still pointing old/unbinded
CPU or Codec driver's DAI name at dlc->dai_name.
To avoid this issue, it needs to alloc memory and keep DAI name
even though if CPU or Codec driver was unbinded.
Or, always do unbind/bind at Sound Card.
For now, this patch indicates this issue as FIXME.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgpdu75m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC try to rebind Sound Card if Card/CPU/Codec/Platform
were unbinded and re-binded again.
But, Simple Card might can't rebind again if user do for example
unbind CPU or Codec driver
bind CPU or Codec driver
Because Simple Card is still pointing old/unbinded
CPU or Codec driver's DAI name at dlc->dai_name.
To avoid this issue, it needs to alloc memory and keep DAI name
even though if CPU or Codec driver was unbinded.
Or, always do unbind/bind at Sound Card.
For now, this patch indicates this issue as FIXME.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tv9tu75x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
soc_probe_link_components() has paired soc_remove_link_components(),
but, these are implemented at different place.
So it is difficult to confirm code.
This patch moves soc_probe_link_components() next to
soc_remove_link_components().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o90g7lbd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
soc-dapm has snd_soc_dapm_free() which cleanups debugfs, widgets, list.
But, there is no paired initialize function.
This patch adds snd_soc_dapm_init() and initilaizing dapm
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pnkw7lbj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC setups some dapm related member at
snd_soc_component_initialize() which is called when component was
registered, and setups remaining member at soc_probe_component()
which is called when component was probed.
This kind of setup separation is no meanings, and it is very
difficult to read and confusable.
This patch setups all dapm settings at one place.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r25c7lbo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
soc_probe_comonent() has paired soc_remove_comonent(),
but, these are implemented at different place.
So it is difficult to confirm code.
This patch moves soc_probe_component() next to
soc_remove_component().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgps7lbt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
soc_rtd_init() was soc_post_component_init(), but there was no
its paired soc_post_component_free(), but it is done at
soc_remove_link_dais().
This means it is difficult to find related code.
This patch adds soc_rtd_free() which is paired soc_rtd_init().
soc_rtd_xxx() will be more cleanuped in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tva87lby.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a bit of mess between cros-ec mfd includes and platform
includes. For example, we have a linux/mfd/cros_ec.h include that
exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
we have a linux/mfd/cros_ec_commands.h file that is non related to the
multifunction device (in the sense that is not exporting any function of
the mfd device). This causes crossed includes between mfd and
platform/chrome subsystems and makes the code difficult to read, apart
from creating 'curious' situations where a platform/chrome driver includes
a linux/mfd/cros_ec.h file just to get the exported functions that are
implemented in another platform/chrome driver.
In order to have a better separation on what the cros-ec multifunction
driver does and what the cros-ec core provides move and rework the
affected includes doing:
- Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
- Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
driver from include/linux/mfd/cros_ec.h to a new file
include/linux/platform_data/cros_ec_proto.h
- Update all the drivers with the new includes, so
- Drivers that only need to know about the protocol include
- linux/platform_data/cros_ec_proto.h
- linux/platform_data/cros_ec_commands.h
- Drivers that need to know about the cros-ec mfd device also include
- linux/mfd/cros_ec.h
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Series changes: 3
- Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Now, the ChromeOS EC core driver has nothing related to an MFD device, so
move that driver from the MFD subsystem to the platform/chrome subsystem.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The forward declaration of mt8183_mt6358_ts3a227_max98357_headset_init
is for cyclic dependency between card, headset_dev, and headset_init.
It used to be:
- card depends on headset_dev
- headset_dev depends on headset_init
- headset_init depends on card
Commit a962a809e5 ("ASoC: mediatek: mt8183: make headset codec
optional") removed the cyclic dependency.
Thus, it is safe to remove the forward declaration.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20190830074240.195166-4-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move headset jack descriptor from module global scope to card-specific
storage to make its ownership more explicit.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20190830074240.195166-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move private structure to the beginning of file to declare earlier
so that most functions can see it.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20190830074240.195166-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should only select SND_INTEL_NHLT when ACPI is defined. This was
done for the legacy HDAudio driver but not for DSP-enabled cases,
leading to compilation errors with randconfig.
Fix by aligning on the same solution.
For the Skylake driver this is overkill since there is a top-level
dependency on ACPI, but it doesn't hurt and it's better to have
consistency.
Fixes: 68b953aeb5 ('ASoC: SOF: Intel: hda: fixup HDaudio topology name with DMIC number')
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190829214213.11653-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With legacy ADSP private context adjusted, there is no need for double
safety.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190822113616.22702-5-cezary.rojewski@intel.com
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
With legacy ADSP private context adjusted, there is no need for double
safety.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190822113616.22702-4-cezary.rojewski@intel.com
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
With legacy ADSP private context adjusted, there is no need for double
safety.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190822113616.22702-3-cezary.rojewski@intel.com
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Apart from Haswell machines, all other devices have their private data
set to snd_soc_acpi_mach instance.
Changes for HSW/ BDW boards introduced with series:
https://patchwork.kernel.org/cover/10782035/
added support for dai_link platform_name adjustments within card probe
routines. These take for granted private_data points to
snd_soc_acpi_mach whereas for Haswell, it's sst_pdata instead. Change
private context of platform_device - representing machine board - to
address this.
Fixes: e87055d732 ("ASoC: Intel: haswell: platform name fixup support")
Fixes: 7e40ddcf97 ("ASoC: Intel: bdw-rt5677: platform name fixup support")
Fixes: 2d067b2807 ("ASoC: Intel: broadwell: platform name fixup support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190822113616.22702-2-cezary.rojewski@intel.com
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The davinci McBSP (davinci-i2s) driver does not implement the set_sysclk
callback, which is fine and should not be treated as error.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190830103841.25128-5-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the daVinci devices does not boot with DT. In this case the DMA
channel is looked up with dma_slave_map and for that the chan_names[]
must be configured.
Both McASP and ASP/McBSP uses "tx" and "rx" as channel names, so we can
just do this when the dev->of_node is not valid.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190830103841.25128-4-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASP/McBSP can support 8/16/20/24/32 bits word in theory. I have only tested
S16_LE and S32_LE, the other formats might not work so only extend the
supported formats with S32_LE for now.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190830103841.25128-2-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the driver uses snd_soc_rtdcom_lookup() in it's mcbsp_start
function to try to stop/restart the DMA as the initial XSYNCERR workaround
need to be done before the DMA is armed.
There are couple of things wrong with this:
- the driver crashes with NULL pointer dereference as the
component->driver->ops is actually NULL
- the driver should not use snd_soc_rtdcom_lookup() in the first place
- Fiddling with DMA is never a good thing
Move the workaround handling to .prepare which is called before the DMA is
armed, so it complies with the requirements.
Reported-by (usage of snd_soc_rtdcom_lookup): Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190830103841.25128-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append fallthrough statement to fix warning reported during compilation.
Fixes: b80d19c166 ("ASoC: Intel: Restore Baytrail ADSP streams only when ADSP was in reset")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190828095102.15737-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
