Currently, if a test causes constant output but never reaches a
boot prompt, or crashes, the test will never stop. Add STOP_TEST_AFTER
to create a variable that will stop (and fail) the test after it has run
for this amount of time. The default is 10 minutes. Setting this
variable to -1 will disable it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Record the console of tests to both the console and the log.
Also, record the bug reports afte the test has completed.
Currently, if a kernel bug happens while running the userland
test, the test stops and will not record the kernel bug. This
makes it difficult to solve what happened.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The config STOP_AFTER_FAILURE is the number of seconds to continue
the test when a failure is detected. This lets the monitor record
more data to the logs and console that may be helpful in solving
the bug that was found.
But the test had a bug. If the failure caused multiple
"Call Trace" stack dumps, the start time to compare the
STOP_AFTER_FAILURE would constantly be reset. Only update the start
time at the first "Call Trace" instance.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the config option BISECT_FILES that allows the user to
specify what path in the kernel to run the git bisect on.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If a during a git bisect, ktest fails on something other than
what it is testing (if BISECT_TYPE is test but it fails on build),
if BISECT_SKIP is set, then it will do a "git bisect skip" instead
of just failing the bisect and letting the user find a good commit
to test.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For both git bisect and config bisect, if BISECT_MANUAL is set to 1,
then bisect will stop between iterations and ask the user for the
result. The actual result is ignored. This makes it possible to
use ktest.pl for bisecting configs and git and let the user examine
the results themselves and enter their own results.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When bisecting, one may come across a kernel that does not have
make oldnoconfig. In this case, we need to run the command "yes"
into a make oldconfig. This will select defaults instead of 'n'
into each command, but it works as a work around.
Note, "yes n" will not work because a config may have a value that
"n" is not acceptable for.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently we just look for a Call Trace to start the time out
when to reboot the box. But if the kernel panics and does not
show a Call Trace, the test will not reboot the box after
the specified timeout.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the test fails and a logfile was specified. Print the name to
let the user know where to look for more information on the
failure.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
OK, the copyright allows you to write a copy, still I think the lawyers
prefer the correct spelling.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
LKML-Reference: <1295899921-11333-1-git-send-email-u.kleine-koenig@pengutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In keeping with the notion that all tools should be simple for
all to use. I've changed ktest.pl to ask for mandatory options
instead of just failing. It will append (or create) the options
the user types in, onto the config file.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
During the config_bisect, in case of failure, it is nice to have
the last good and bad .configs that were used. This would let
us restart the config_bisect from those configs.
Copy the last good config into the output dir as config_good,
and the last bad config as config_bad.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The run_ssh handles the ssh variable $SSH_COMMAND, which was not
being used by the run_command in reboot_to function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Added the options STOP_AFTER_SUCCESS and STOP_AFTER_FAILURE to
allow the user to give a time (in seconds) to stop the monitor
after a stack trace or login has been detected. Sometimes the
kernel constantly prints out to the console and this may cause
the test to run indefinitely.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When we store failures, we create a directory that has the build_type
in it. For useconfig, it also contains the name path of the config
file it uses. This unfortunately gets its own directory on failure.
Parse off the directory name when creating the directory to store
the failures.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
By using the "use_config" for minconfig and addconfig we risk
trying to copy itself to itself, which will cause an unexpected failure.
Use a different name instead.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a compare script that makes sure that all the options in
sample.conf are used in ktest.pl, and all the options in
ktest.pl are described in sample.conf.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Added the ability to do a config_bisect. It starts with a bad
config and does the following loop.
Enable half the configs.
if none of the configs to check are not enabled
(caused by missing dependencies) enable the other half.
Run the test
if the test passes, remove the configs from the check
but enabled them for further tests (to satisfy
dependencies).
else
Remove any config that was not enabled, as we have found
a new config that can cause a failure.
loop till we have only one config left.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Updated to version 0.2.
Now have SSH_EXEC options.
Also added some cleanups for keeping track of success and
reading the config file.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Have a easy way to parse the log file for success or failure.
KTEST RESULT: ...
Suggested-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Allow a test case in the config file to undefine a default
value by specifying the option and equal sign but not assigning
it a value:
OPTION =
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Running the command "yes ''" through the make oldconfig may enable
things we do not want enabled. If something is default enabled, the
yes command with '' as an argument will enable it.
Use oldnoconfig, which runs everything as if 'no' was used.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Change the config to use TEST_START where the options after a
TEST_START automatically get the [] as it is read and they do
not need to exist in the config file;
TEST_START
MIN_CONFIG = myconfig
is the same as
MIN_CONFIG[1] = myconfig
The benefit is that you no longer need to keep track of test numbers
with tests.
Also process the commit ids that are passed to the options
to get the actually SHA1 so it is no longer relative to the branch.
Ie, saying HEAD will get the current SHA1 and then that will
be used, and will work even if another branch is checked out.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Added the options POWEROFF_AFTER_HALT to handle boxes that do not
really shut off after a halt is called.
Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that
don't reboot but get stuck during the reboot.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a POST_INSTALL option that runs after the build and install
but before rebooting to the test kernel. This alls the user to
run a script that will install an initrd (or anything else that may
be special) before booting.
An environment variable KERNEL_VERSION is set.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Added sample.conf as a nice document to show new users.
Use a %default hash to separate out the options that are default
and allow us to complain about options being set twice.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It is much better to keep the monitor running throughout a
test than to constantly start and stop it. Some console readers
will show everything that has happened before when opening the
console, and by opening it several times, causes the old content to
be read multiple times in a single test.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add option to continue after a test fails.
Add option to reset the log at start of running ktest.
Update default timeout to 2 minutes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Added the ability to do a reverse bisect.
Better logging of running commands.
Added the copyright statement.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Added patchcheck functionality. It will checkout a given SHA1
and test that commit and all commits to another given SHA1.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
REBOOT_ON_ERROR to reboot the box on error
BUILD_OPTIONS to add options to the make build (like -j40)
Added "useconfig:<config>".
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Added dodie function to have a bit more control over die calls.
BUILD_NOCLEAN to not run make mrproper or remove .config.
POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests.
Skip backtrace calls that were done by the backtrace tests.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Originally named autotest.pl, but renamed to ktest.pl now because
the autotest name is used by other projects.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
