For HDaudio and Skylake drivers, add module parameter "pci_binding"
When pci_binding == 0 (AUTO), the PCI class/subclass info is used to
select drivers based on the presence of the DSP.
pci_binding == 1 (LEGACY) forces the use of the HDAudio legacy driver,
even if the DSP is present.
pci_binding == 2 (ASOC) forces the use of the ASOC driver. The
information on the DSP presence is bypassed.
The value for the module parameter needs to be identical for both
drivers. This parameter is intended as a back-up solution if the
automatic detection fails or when the DSP usage fails. Such cases
should be reported on the alsa-devel mailing list for analysis.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that the SST/Skylake driver supports per platform selectors, we
can add logic to automatically select the right driver.
If the Skylake driver is selected for a specific platform, and the DSP
is detected at run-time based on the PCI class/subclass/prog-if
information, the legacy HDaudio driver aborts the probe. This will
result in a single driver probing and remove the need for modprobe
blacklists.
Follow-up patches will add a module parameter to bypass the logic if
this automatic detection fails, or if the Skylake driver is unable to
actually support the platform (firmware authentication, missing
topology file, hardware issue, etc).
The same mechanism will be used to conflicts generated by the same PCI
ID being registered by both legacy HDAuudio and SOF drivers for Intel
platforms. In other words SOF will not require changes to the HDaudio
legacy.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Not much work on the core this time around but we've seen quite a bit of
driver work, including on the generic DT drivers. There's also a large
part of the diff from a merge of the DaVinci and OMAP directories, along
with some active development there:
- Preparatory work from Morimoto-san for merging the audio-graph and
audio-graph-scu cards.
- A merge of the TI OMAP and DaVinci directories, the OMAP product line
has been merged into the DaVinci product line so there is now a lot
of IP sharing which meant that the split directories just got in the
way. This has pulled in a few architecture changes as well.
- A big cleanup of the Maxim MAX9867 driver from Ladislav Michl.
- Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx I2S
controllers.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlwY7KsTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0MFqB/4m9nlfUeXTpiSD1FgVIlMmdPNUg4V2
6Ybztaw4kRc5LuQN8PXQmaFLx020yAnLvI7Zzj7l3K8r6a9lfyFs+pKL0wtBnNK2
9QEFmOVQ3QFpt31Yb2IQeO4dfNbiyKeczjLau4mXWTl0j5dc/UH+HasE1dRZOxsC
rqJ8IsdibIVxVtQ7ZmcnU+y6XK0inBHAAh6ksMehsufShGrfrLs/nRBaXRZcRqJg
ciSFY5uYRYkDxTgogTpNRfVy4nr17N10+0sgrQ3RtaaqgG3gBXsHca1meyxKYW3Q
TssOJGIl3+uGiAMNyZqzxe5pAwwuGhZ3hAAAODtfYJQtAuAOW3/45Wqh
=phWF
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v4.21
Not much work on the core this time around but we've seen quite a bit of
driver work, including on the generic DT drivers. There's also a large
part of the diff from a merge of the DaVinci and OMAP directories, along
with some active development there:
- Preparatory work from Morimoto-san for merging the audio-graph and
audio-graph-scu cards.
- A merge of the TI OMAP and DaVinci directories, the OMAP product line
has been merged into the DaVinci product line so there is now a lot
of IP sharing which meant that the split directories just got in the
way. This has pulled in a few architecture changes as well.
- A big cleanup of the Maxim MAX9867 driver from Ladislav Michl.
- Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx I2S
controllers.
We no longer have these options used anywhere.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Create new directory to contain all Texas Instruments specific DAI,
platform and machine drivers instead of scattering them under davinci and
omap directories.
There is already inter dependency between the two directories becasue of
McASP (on dra7x it is serviced by sDMA, not EDMA).
With the upcoming AM654 we will need to introduce new platform driver for
UDMA and it does not fit under davinci, nor under omap.
With the move I have restructured the Kconfig to be more usable in the era
of simple-sound-card:
CPU DAIs can be selected individually and they will select the platform
driver they can be served with.
To avoid breakage, I have moved over deprecated Kconfig options so
defconfig builds will work without regression.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
For sound/soc/{omap => ti}:
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch add support to Display_port_rx mixers required to
select path between ASM stream and AFE ports.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support of AFE DAI for Display_port_rx port.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for Display_Port_Rx
port in AFE.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds MP3 playback support in q6asm dais, adding other codec
support should be pretty trivial.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to mp3 format in ASM module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The current SKYLAKE kconfig is a all-you-can-eat selection that will
support all known plaforms. This is however not necessarily a good
thing: most platforms for SKL and KBL don't support the DSP, but a
number of CNL/WHL ones do. Selecting this driver in all cases isn't
really smart and will require users to muck with blacklists.
Partition the configs to allow distributions to select on which
platform this driver is used. Keep the existing SND_SOC_INTEL_SKYLAKE
config to select everything for backwards compatibility. This patch does
not provide new functionality, only finer-grained choices in supported
platforms.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple-card is handling "prefix" by many ways.
But, it is not useful and readable.
We want to do is that allow having it everywere.
This patch supports it.
It will be overwrote if lower node has it.
sound {
simple-audio-card,prefix = "xxx"; // initial
simple-audio-card,dai-link {
prefix = "xxx"; // overwrite
cpu {
...
};
codec {
prefix = "xxx"; // overwrite
};
};
};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple-card is handling "convert_rate/channel"
by many ways. But, it is not useful and readable.
We want to do is that allow having it everywere.
This patch support it.
It will be overwrote if lower node has it.
sound {
simple-audio-card,convert_channels = <xxx>; // initial
simple-audio-card,dai-link {
convert_channels = <xxx>; // overwrite
cpu {
convert_channels = <xxx>; // overwrite
};
codec {
convert_channels = <xxx>; // overwrite
};
};
};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple-card is handling "mclk-fs" by many way.
But, it is not useful and readable.
We want to do is that allow having mclk-fs everywere.
This patch support it.
It will be overwrote if lower node has it.
sound {
simple-audio-card,mclk-fs = <xxx>; // for initial
simple-audio-card,dai-link {
mclk-fs = <xxx>; // overwrite
cpu {
mclk-fs = <xxx>; // overwrite
};
codec {
mclk-fs = <xxx>; // overwrite
};
};
};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card and simple-scu-card are very similar driver,
but the former is supporting normal sound card,
the latter is supporting DPCM sound card.
We couldn't use normal sound and DPCM sound in same time by
one sound card. This patch merges both sound card into
simple-card. Now we can use both feature on same driver.
simple-card is now supporting .compatible = "simple-scu-audio-card".
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card is handling "prefix" by many ways.
But, it is not useful and readable.
We want to do is that allow having it everywere.
This patch supports it.
It will be overwrote if lower node has it.
sound {
prefix = "xxx"; // initial
};
codec {
audio-graph-card,prefix = "xxx"; // overwrite
ports {
prefix = "xxx"; // overwrite
port {
prefix = "xxx"; // overwrite
};
};
};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card is handling "convert_rate/channel"
by many ways. But, it is not useful and readable.
We want to do is that allow having it everywere.
This patch support it.
It will be overwrote if lower node has it.
sound {
convert-channels = <xxx>; // initial
};
codec {
audio-graph-card,convert-channels = <xxx>; // overwrite
ports {
convert_channels = <xxx>; // overwrite
port {
convert_channels = <xxx>; // overwrite
endpoint {
convert_channels = <xxx>; // overwrite
};
};
};
};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card is handling "mclk-fs" by many way.
But, it is not useful and readable.
We want to do is that allow having mclk-fs everywere.
This patch support it.
It will be overwrote if lower node has it.
sound {
mclk-fs = <xxx>; // initial
};
codec {
ports {
mclk-fs = <xxx>; // overwrite
port {
mclk-fs = <xxx>; // overwrite
endpoint {
mclk-fs = <xxx>; // overwrite
};
};
};
};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card and audio-graph-scu-card are very similar driver,
but the former is supporting normal sound card,
the latter is supporting DPCM sound card.
We couldn't use normal sound and DPCM sound in same sound card by
audio-graph-card.
This patch merges both sound card into it.
Now we can use both feature on same driver.
audio-grap-card is now supporting .compatible = "audio-graph-scu-card".
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit b6f3fc005a ("ASoC: simple-card-utils: fixup
asoc_simple_card_get_dai_id() counting") fixuped getting DAI ID method.
It will get DAI ID from OF graph "port", but, we want to consider about
"endpoint", too.
And, we also want to keep compatibility.
This patch fixup it as
if (driver has specified DAI ID)
use it as DAI ID
else if (OF graph endpoint has reg)
use it as DAI ID
else if (OF graph port has reg)
use it as DAI ID
else
use endpoint count as DAI ID
Fixes: commit b6f3fc005a ("ASoC: simple-card-utils: fixup asoc_simple_card_get_dai_id() counting")
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove no_pcm check to invoke pcm_new() for backend dai-links
too. This fixes crash in hdmi codec driver during hdmi_codec_startup()
while accessing chmap_info struct. chmap_info struct memory is
allocated in pcm_new() of hdmi codec driver which is not invoked
in case of DPCM when hdmi codec driver is part of backend dai-link.
Below is the crash stack:
[ 61.635493] Unable to handle kernel NULL pointer dereference at virtual address 00000018
..
[ 61.666696] CM = 0, WnR = 1
[ 61.669778] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffc0d6633000
[ 61.676526] [0000000000000018] *pgd=0000000153fc8003, *pud=0000000153fc8003, *pmd=0000000000000000
[ 61.685793] Internal error: Oops: 96000046 [#1] PREEMPT SMP
[ 61.722955] CPU: 7 PID: 2238 Comm: aplay Not tainted 4.14.72 #21
..
[ 61.740269] PC is at hdmi_codec_startup+0x124/0x164
[ 61.745308] LR is at hdmi_codec_startup+0xe4/0x164
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Clicks and pops of various volumes can be produced while the device is
opened, closed, put into and taken out of standby, or reconfigured.
Fix this, by implementing the digital_mute interface, so that the
output is muted during such operations.
Signed-off-by: Dimitris Papavasiliou <dpapavas@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Even if this spdif input driver is only supposed to be used on 64bits
platform, there is possible problem with 32bits and do_div, as reported
by the kbuild robot. Just fix it.
Fixes: 5ce5658375 ("ASoC: meson: add axg spdif input")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add error logs to make probe debug easier.
Also remove hard-coded dependency on NHLT. NHLT literally stands for
NonHdaudioLinkTable and is only required for SSP/DMIC interfaces.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
bus->ppcap is now tested upfront, there is no need to re-check if the
hardware is exposed as needed. Remove tests and remove indentation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Check immediately if required HDaudio capabilities can't be found (no
PPCAP or no streams exposed in GCAP), and move all DMA inits after the
error tests.
PPCAP and GCAP are not reliable indicators of DSP presence, but if
they don't exist then the driver will not work.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing PPCAP and GCAP fields cannot be used reliably to
determine if the DSP is enabled by the BIOS. Instead rely on the
class/subclass information to find out if this driver can run or
not. The values in the code don't seem to be documented in publicly
available documents but are part of recommendations made to BIOS
writers and have been verified to be accurate on a number of
platforms.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It's with CNP, supposed to be equivalent with CNL entry.
Keep the existing declaration style for now, at a later point we may
transition and use PCI_DEVICE_DATA().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
I2S IP instance can work in transmitter/playback or receiver/capture mode
exclusively. The patch registers corresponding instance as ASoC component
with audio framework.
Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The new Dell IoT platform uses kabylake + alc3277 codec, and alc3277
shares the driver with the codec rt5660, here we generate a new
machine driver based on kbl_da7219_max98357a.
The audio design on this IoT platform is as below:
- Intel kabylake platform
- connect the codec ALC3277 via SSP0
- line-out and line-in with Micbias jacks
- line-out mute control and jack detection of line-out and line-in
- two HDMI ports with audio capability
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the spdif input decoder of the axg SoC family
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
add IEC958_SUBFRAME_LE to the list of format accepted by the fifo frontend.
As opposed to what was initially noted in the toddr dai driver, the spdifin
does not place the msb at bit 28, it just output a whole spdif subframe.
Placing the msb at bit 28 in the toddr driver just filters out the parity,
user, channel status and validity bits. It is better to just provide the
whole spdif subframe to the userspace and let the iec958 plugin deal with
it.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 4fb7f4df49 ("ASoC: simple-card: use cpu/codec pointer on
simple_dai_props") updated {cpu,codec}_dai to be pointers in struct
simple_dai_props but didn't update these locations to dereference the
pointers.
This patch fixup it for non DT simple-card use case.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
eukrea-tlv320.c machine driver runs on non-DT platforms
and include <asm/mach-types.h> header file in order to be able
to use some machine_is_eukrea_xxx() macros.
Building it for ARM64 causes the following build error:
sound/soc/fsl/eukrea-tlv320.c:28:10: fatal error: asm/mach-types.h: No such file or directory
Avoid this error by not allowing to build the SND_SOC_EUKREA_TLV320
driver when ARM64 is selected.
This is needed in preparation for the i.MX8M support.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd is using RSND_REG_xxx for register naming,
and using RSND_REG_##f style macro for read/write.
The biggest reason why it uses this style is that
we can avoid non-existing register access.
But, its demerit is sequential register access code will
be very ugly.
Current rsnd driver is well tested, so, let's remove RSND_REG_
from rsnd_reg, and cleanup sequential register access code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple-scu-card didn't care about codec_conf
for multi DPCM case. This patch cares it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In DPCM case, it uses CPU-dummy / dummy-Codec dai links, and
non DPCM case, it uses CPU-Codec dai links.
Now, we want to merge simple-card and simple-scu-card.
These sound cards are using silimar but not same logic on each functions.
Then, of course we want to share same logic.
To compromise, this patch uses cpu/codec pointer on simple-scu-card.
It is same logic with simple-card, thus easy merging.
This is prepare for merging simple card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-scu-card.c is supporting "convert-rate/channels" which is
used for DPCM.
But, sound card might have multi codecs, and each codec might need
each convert-rate/channels.
This patch supports each codec's convert-rate/channles support.
top node convert-rate/channels will overwrite settings if exist.
It can't support each codec's convert-rate/channels if sound card had
multi codecs without this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In DPCM case, it uses CPU-dummy / dummy-Codec dai links.
If sound card is caring only DPCM, link count = dai count,
but, if non DPCM case, link count != dai count.
Now, we want to merge simple-card and simple-scu-card,
then, we need to care both link / dai count more carefly
This patch cares it, and prepare for merging simple card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card is supporting dai-link support, but simple-scu-card
doesn't have it.
This patch support it. This is prepare for merging simple-card
and simple-scu-card.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The display power is in unbalance at removing the driver since it
misses the snd_hdac_display_power(OFF) call.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After the recent refactoring, snd_hdac_display_power() doesn't return
any error, hence it can be defined to return void.
This makes many error checks redundant and allows us to reduce them
gracefully.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current HD-audio code manages the DRM audio power via too complex
redirections, and this seems even still unbalanced in a corner case as
Intel DRM CI has been intermittently reporting. This patch is a big
surgery for addressing the complexity and the possible unbalance.
Basically the patch changes the display PM in the following ways:
- Both HD-audio controller and codec drivers call a single helper,
snd_hdac_display_power(). (Formerly, the display power control from
a codec was done indirectly via link_power bus ops.)
- snd_hdac_display_power() receives the codec address index. For
turning on/off from the controller, pass HDA_CODEC_IDX_CONTROLLER.
- snd_hdac_display_power() doesn't manage refcounts any longer, but
keeps the power status in bitmap. If any of controller or codecs is
turned on, the function updates the DRM power state via get_power()
or put_power().
Also this refactor allows us more cleanup:
- The link_power bus ops is dropped, so there is no longer indirect
management, as mentioned in the above.
- hdac_device link_power_control flag is moved to hda_codec
display_power_control flag, as it's only for HDA legacy.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106525
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current simple-scu-card driver is parsing codec position for DPCM
and consider DAI format. But, current operation is doing totally pointless,
because it should be called for each CPU/Codec pair.
Let's tidyup asoc_simple_card_parse_daifmt() timing.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In DPCM case, it uses CPU-dummy / dummy-Codec dai links, and
non DPCM case, it uses CPU-Codec dai links.
Now, we want to merge simple-card and simple-scu-card.
These sound cards are using silimar but not same logic on each functions.
Then, of course we want to share same logic.
To compromise, this patch uses cpu/codec pointer on simple-card.
It is same logic with simple-scu-card, thus easy merging.
This is prepare for merging audio card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_OF is disabled, of_graph_parse_endpoint() does not
initialize 'info', and gcc can see that:
sound/soc/generic/simple-card-utils.c: In function 'asoc_simple_card_parse_graph_dai':
sound/soc/generic/simple-card-utils.c:284:13: error: 'info.port' may be used uninitialized in this function [-Werror=maybe-uninitialized]
It's probably best to check the return code anyway, and that also
takes care of the warning.
Fixes: b6f3fc005a ("ASoC: simple-card-utils: fixup asoc_simple_card_get_dai_id() counting")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Calling into the codec driver adds a dependency on that being reachable
from the module:
ERROR: "rt5663_sel_asrc_clk_src" [sound/soc/qcom/snd-soc-sdm845.ko]
undefined!
Add the corresponding select statement, as it is done in the other user
(Intel).
Fixes: f7485875a687 ("ASoC: sdm845: Add configuration for headset codec")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
