This is a preparatory patch for moving irq_data struct members.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit 0c8c0f03e3 ("x86/fpu, sched: Dynamically allocate 'struct fpu'")
moved the thread_struct to the bottom of task_struct. As a result, the
offset is now too large to be used in an immediate add on arm64 with
some kernel configs:
arch/arm64/kernel/entry.S: Assembler messages:
arch/arm64/kernel/entry.S:588: Error: immediate out of range
arch/arm64/kernel/entry.S:597: Error: immediate out of range
This patch calculates the offset using an additional register instead of
an immediate offset.
Fixes: 0c8c0f03e3 ("x86/fpu, sched: Dynamically allocate 'struct fpu'")
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This makes BPF_ANC | SKF_AD_VLAN_TAG and BPF_ANC | SKF_AD_VLAN_TAG_PRESENT
have the same behaviour as the in kernel VM and makes the test_bpf LD_VLAN_TAG
and LD_VLAN_TAG_PRESENT tests pass.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, the JIT would reject negative offsets known during code
generation and mishandle negative offsets provided at runtime.
Fix that by calling bpf_internal_load_pointer_neg_helper()
appropriately in the jit_get_skb_{b,h,w} slow path helpers and by forcing
the execution flow to the slow path helpers when the offset is
negative.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
To check whether the load should take the fast path or not, the code
would check that (r_skb_hlen - load_order) is greater than the offset
of the access using an "Unsigned higher or same" condition. For
halfword accesses and an skb length of 1 at offset 0, that test is
valid, as we end up comparing 0xffffffff(-1) and 0, so the fast path
is taken and the filter allows the load to wrongly succeed. A similar
issue exists for word loads at offset 0 and an skb length of less than
4.
Fix that by using the condition "Signed greater than or equal"
condition for the fast path code for load orders greater than 0.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
From Krzysztof Kozlowski:
1. Fix exynos3250 MIPI DSI display and MIPI CSIS-2 camera sensorx
after adding support for PMU regmap in exynos-video-mipi driver
(issue introduced in v4.0).
2. Bring back cpufreq for exynos4210 after incomplete switch to
cpufreq-dt driver in 4.2 merge window. The necessary DT changes
for exynos4210 cpufreq was not applied to the same tree as rest
of patchset because of multiple conflicts between clk and arm-soc
trees. Unfortunately without the change the exynos4210 boards
loose cpufreq feature.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=2MmH
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
Merge "Samsung fixes for v4.2" from Kukjin Kim:
From Krzysztof Kozlowski:
1. Fix exynos3250 MIPI DSI display and MIPI CSIS-2 camera sensorx
after adding support for PMU regmap in exynos-video-mipi driver
(issue introduced in v4.0).
2. Bring back cpufreq for exynos4210 after incomplete switch to
cpufreq-dt driver in 4.2 merge window. The necessary DT changes
for exynos4210 cpufreq was not applied to the same tree as rest
of patchset because of multiple conflicts between clk and arm-soc
trees. Unfortunately without the change the exynos4210 boards
loose cpufreq feature.
* tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: add CPU OPP and regulator supply property for exynos4210
ARM: dts: Update video-phy node with syscon phandle for exynos3250
Signed-off-by: Olof Johansson <olof@lixom.net>
Make WT really mean WT (rather than UC).
I can't see why commit 9cd25aac1f ("x86/mm/pat: Emulate PAT when
it is disabled") didn't make this to match its changes to
pat_init().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/55ACC3660200007800092E62@mail.emea.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Complete the set of dependent features that need disabling at
once: XSAVEC, AVX-512 and all currently known to the kernel
extensions to it, as well as MPX need to be disabled too.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/55ACC40D0200007800092E6C@mail.emea.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MPX setups private anonymous mapping, but uses vma->vm_ops too.
This can confuse core VM, as it relies on vm->vm_ops to
distinguish file VMAs from anonymous.
As result we will get SIGBUS, because handle_pte_fault() thinks
it's file VMA without vm_ops->fault and it doesn't know how to
handle the situation properly.
Let's fix that by not setting ->vm_ops.
We don't really need ->vm_ops here: MPX VMA can be detected with
VM_MPX flag. And vma_merge() will not merge MPX VMA with non-MPX
VMA, because ->vm_flags won't match.
The only thing left is name of VMA. I'm not sure if it's part of
ABI, or we can just drop it. The patch keep it by providing
arch_vma_name() on x86.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org> # Fixes: 6b7339f4 (mm: avoid setting up anonymous pages into file mapping)
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@sr71.net
Link: http://lkml.kernel.org/r/20150720212958.305CC3E9@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
flush_tlb_info->flush_start/end are both normal virtual
addresses. When calculating 'nr_pages' (only used for the
tracepoint), I neglected to put parenthesis in.
Thanks to David Koufaty for pointing this out.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@sr71.net
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20150720230153.9E834081@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For Exynos4210 platforms, add CPU operating points and CPU regulator
supply properties for migrating from Exynos specific cpufreq driver
to using generic cpufreq driver.
Cc: Doug Anderson <dianders@chromium.org>
Cc: Andreas Faerber <afaerber@suse.de>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Andreas Farber <afaerber@suse.de>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
[b.zolnierkie: removed exynos5250 and exynos5420 support for now]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[k.kozlowski: Rebased, moved cpu nodes to alphabetical position]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
As a follow-up to recent changes to Exynos mipi video phy driver,
introducing support for PMU regmap in commit e4b3d38088 ("phy:
exynos-video-mipi: Fix regression by adding support for PMU regmap")
add a syscon phandle to video-phy node to bring back to life both
MIPI DSI display and MIPI CSIS-2 camera sensor on Exynos3250.
Signed-off-by: Beata Michalska <b.michalska@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Pull s390 fix from Martin Schwidefsky:
"Fast path fix for the thread_struct breakage"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: adapt entry.S to the move of thread_struct
There are configurations which may not have LDD/STD
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
git commit 0c8c0f03e3
"x86/fpu, sched: Dynamically allocate 'struct fpu'"
moved the thread_struct to the end of the task_struct.
This causes some of the offsets used in entry.S to overflow their
instruction operand field. To fix this use aghi to create a
dedicated pointer for the thread_struct.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Being highly configurable core ARC HS among other features might be
configured with or without DIV_REM_OPTION (hardware divider).
That option when enabled adds following instructions: div, divu, rem, remu.
By default ARC HS38 has this option enabled. So we add here possibility
to disable usage of hardware divider by compiler.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Migrate arc driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Migrate avr32 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We want to call cpu_idle_poll_ctrl() in shutdown only if we were in
oneshot or resume state earlier. Create another variable to save this
information and check that in shutdown callback.
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes for 4.2.
Things are looking quite decent at this stage but the recent work on
the FPU support took its toll:
- fix an incorrect overly restrictive ifdef
- select O32 64-bit FP support for O32 binary compatibility
- remove workarounds for Sibyte SB1250 Pass1 parts. There are rare
fixing the workarounds is not worth the effort.
- patch up an outdated and now incorrect comment"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU
MIPS: SB1: Remove support for Pass 1 parts.
MIPS: Require O32 FP64 support for MIPS64 with O32 compat
MIPS: asm-offset.c: Patch up various comments refering to the old filename.
Pull parisc fix from Helge Deller:
"A memory leak fix from Christophe Jaillet which was introduced with
kernel 4.0 and which leads to kernel crashes on parisc after 1-3 days"
* 'parisc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: mm: Fix a memory leak related to pmd not attached to the pgd
By far most of the fixes here are updates to DTS files to deal with some
mostly minor bugs.
There's also a fix to deal with non-PM kernel configs on i.MX, a
regression fix for ethernet on PXA platforms and a dependency fix for OMAP.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVqyQoAAoJEIwa5zzehBx3e6EQAIUcOpKzHZ9oC6r16Cs+UwRy
cFQcYwhZqR4XhlbkI5VBOY+Ul1Kd7GoRYkH1sSN0OLIO0ippO7gwzkioAnAoeFC9
lqdHLJ/tpwahJOdpSe8doFLrJ5uGybPccoAF5vxAWOxQbV21Ck7pzWxUpHsR0pAq
8nRvz8GmM4vXQih6hnFG9pXNLhY+jSYgabE0IPR0Eb2tRknsGWcvuYH5v+X9O563
7iNjQcBLHxd/otmbtN5p3Za8SmLDo0/iwBkXlruUXdAaotagTASwfmhjFTuqXOns
Pq9v+OUy2Ls06tyo/RDrS/WZOh81YV6az7Bk+ffAkHJzzg2nxs899dti7lBeo5D8
srhA6D7gpdZcJ87fXbubIhuQrMwsIwbMEjH1O4GR8DG0jcvGB4xCutGdTnKNpaFM
i697p8JpSCr43AcPcSGcXfi67fHIRuWFe/o+EnVbmOjUhiQ7+hnOzDMh5L/0Rg1A
+NntzHtyt6QSrPLFUkqA+zCnm/t6JIuvNRVzcn5cvBJPmFBxjDqBbe71CR7ipGcc
iaGSwLWoCKSi0cD9qCAiEjaB4Zxyea9Aif9uCjq40kDV2q+YFGNi1wjZKFS0etVu
NXrEaYa373pCEbr/A5ImI5LL8JOmG8VmXc+RteKEVzc9C4PpY1coDsOKO6Pvx7yO
XnW0naVnNOmdhzyas16B
=SOgd
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"By far most of the fixes here are updates to DTS files to deal with
some mostly minor bugs.
There's also a fix to deal with non-PM kernel configs on i.MX, a
regression fix for ethernet on PXA platforms and a dependency fix for
OMAP"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: keystone: dts: rename pcie nodes to help override status
ARM: keystone: dts: fix dt bindings for PCIe
ARM: pxa: fix dm9000 platform data regression
ARM: dts: Correct audio input route & set mic bias for am335x-pepper
ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX
MAINTAINERS: digicolor: add dts files
ARM: ux500: fix MMC/SD card regression
ARM: ux500: define serial port aliases
ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs
ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs
ARM: dts: Fix frequency scaling on Gumstix Pepper
ARM: dts: configure regulators for Gumstix Pepper
ARM: dts: omap3: overo: Update LCD panel names
ARM: dts: cros-ec-keyboard: Add support for some Japanese keys
ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set
ARM: dts: imx53-qsb: fix TVE entry
ARM: dts: mx23: fix iio-hwmon support
ARM: dts: imx27: Adjust the GPT compatible string
ARM: socfpga: dts: Fix entries order
ARM: socfpga: dts: Fix adxl34x formating and compatible string
Commit 6134d94923 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6")
added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed
the 64-bit CPU case leading to FPU failures when requesting FR=1 mode
(which is always the case for MIPS R6 userland) when running a 32-bit
kernel on a 64-bit CPU. We also fix the MIPS R2 case.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: 6134d94923 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6")
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10734/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 0e0da48dee ("parisc: mm: don't count preallocated pmds")
introduced a memory leak.
After this commit, the 'return' statement in pmd_free is executed in all
cases. Even for pmd that are not attached to the pgd. So 'free_pages'
can never be called anymore, leading to a memory leak.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Helge Deller <deller@gmx.de>
This single fix reenables ethernet cards for several pxa boards,
broken by regulator addition to dm9000 driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YrDi
-----END PGP SIGNATURE-----
Merge tag 'pxa-fixes-v4.2-rc2' of https://github.com/rjarzmik/linux into fixesD
Merge "pxa fixes for v4.2" from Robert Jarzmik:
ARM: pxa: fixes for v4.2-rc2
This single fix reenables ethernet cards for several pxa boards,
broken by regulator addition to dm9000 driver.
* tag 'pxa-fixes-v4.2-rc2' of https://github.com/rjarzmik/linux:
ARM: pxa: fix dm9000 platform data regression
Pull ARM fixes from Russell King:
"A small set of ARM fixes for -rc3, most of them not far off
one-liners, with the exception of fixing the V7 cache invalidation for
incoming SMP processors which was causing problems for SoCFPGA
devices"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: fix __virt_to_idmap build error on !MMU
ARM: invalidate L1 before enabling coherency
ARM: 8404/1: dma-mapping: fix off-by-one error in bitmap size check
ARM: 8402/1: perf: Don't use of_node after putting it
ARM: 8400/1: use virt_to_idmap to get phys_reset address
Pull x86 fixes from Ingo Molnar:
"Two families of fixes:
- Fix an FPU context related boot crash on newer x86 hardware with
larger context sizes than what most people test. To fix this
without ugly kludges or extensive reverts we had to touch core task
allocator, to allow x86 to determine the task size dynamically, at
boot time.
I've tested it on a number of x86 platforms, and I cross-built it
to a handful of architectures:
(warns) (warns)
testing x86-64: -git: pass ( 0), -tip: pass ( 0)
testing x86-32: -git: pass ( 0), -tip: pass ( 0)
testing arm: -git: pass ( 1359), -tip: pass ( 1359)
testing cris: -git: pass ( 1031), -tip: pass ( 1031)
testing m32r: -git: pass ( 1135), -tip: pass ( 1135)
testing m68k: -git: pass ( 1471), -tip: pass ( 1471)
testing mips: -git: pass ( 1162), -tip: pass ( 1162)
testing mn10300: -git: pass ( 1058), -tip: pass ( 1058)
testing parisc: -git: pass ( 1846), -tip: pass ( 1846)
testing sparc: -git: pass ( 1185), -tip: pass ( 1185)
... so I hope the cross-arch impact 'none', as intended.
(by Dave Hansen)
- Fix various NMI handling related bugs unearthed by the big asm code
rewrite and generally make the NMI code more robust and more
maintainable while at it. These changes are a bit late in the
cycle, I hope they are still acceptable.
(by Andy Lutomirski)"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86
x86/fpu, sched: Dynamically allocate 'struct fpu'
x86/entry/64, x86/nmi/64: Add CONFIG_DEBUG_ENTRY NMI testing code
x86/nmi/64: Make the "NMI executing" variable more consistent
x86/nmi/64: Minor asm simplification
x86/nmi/64: Use DF to avoid userspace RSP confusing nested NMI detection
x86/nmi/64: Reorder nested NMI checks
x86/nmi/64: Improve nested NMI comments
x86/nmi/64: Switch stacks on userspace NMI entry
x86/nmi/64: Remove asm code that saves CR2
x86/nmi: Enable nested do_nmi() handling for 64-bit kernels
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, plus a static key fix fixing /sys/devices/cpu/rdpmc"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Really allow to specify custom CC, AR or LD
perf auxtrace: Fix misplaced check for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
perf hists browser: Take the --comm, --dsos, etc filters into account
perf symbols: Store if there is a filter in place
x86, perf: Fix static_key bug in load_mm_cr4()
tools: Copy lib/hweight.c from the kernel sources
perf tools: Fix the detached tarball wrt rbtree copy
perf thread_map: Fix the sizeof() calculation for map entries
tools lib: Improve clean target
perf stat: Fix shadow declaration of close
perf tools: Fix lockup using 32-bit compat vdso
Pull irq fixes from Ingo Molnar:
"Misc irq fixes:
- two driver fixes
- a Xen regression fix
- a nested irq thread crash fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gicv3-its: Fix mapping of LPIs to collections
genirq: Prevent resend to interrupts marked IRQ_NESTED_THREAD
genirq: Revert sparse irq locking around __cpu_up() and move it to x86 for now
gpio/davinci: Fix race in installing chained irq handler
Don't burden architectures without dynamic task_struct sizing
with the overhead of dynamic sizing.
Also optimize the x86 code a bit by caching task_struct_size.
Acked-and-Tested-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437128892-9831-3-git-send-email-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The FPU rewrite removed the dynamic allocations of 'struct fpu'.
But, this potentially wastes massive amounts of memory (2k per
task on systems that do not have AVX-512 for instance).
Instead of having a separate slab, this patch just appends the
space that we need to the 'task_struct' which we dynamically
allocate already. This saves from doing an extra slab
allocation at fork().
The only real downside here is that we have to stick everything
and the end of the task_struct. But, I think the
BUILD_BUG_ON()s I stuck in there should keep that from being too
fragile.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437128892-9831-2-git-send-email-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 2ae416b142 ("mm: new mm hook framework") introduced an empty
header file (mm-arch-hooks.h) for every architecture, even those which
doesn't need to define mm hooks.
As suggested by Geert Uytterhoeven, this could be cleaned through the use
of a generic header file included via each per architecture
asm/include/Kbuild file.
The PowerPC architecture is not impacted here since this architecture has
to defined the arch_remap MM hook.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Switch to my kernel.org alias instead of a badly named gmail address,
which I rarely use.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On s390 we only can enable hugepages if the underlying hardware/hypervisor
also does support this. Common code now would assume this to be
signaled by setting HPAGE_SHIFT to 0. But on s390, where we only
support one hugepage size, there is a link between HPAGE_SHIFT and
pageblock_order.
So instead of setting HPAGE_SHIFT to 0, we will implement the check for
the hardware capability.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heiko noticed that the current check for hugepage support on s390 is a
little bit too harsh as systems which do not support will crash.
The reason is that pageblock_order can now get negative when we set
HPAGE_SHIFT to 0. To avoid all this and to avoid opening another can of
worms with enabling HUGETLB_PAGE_SIZE_VARIABLE I think it would be best
to simply allow architectures to define their own hugepages_supported().
Revert bea41197ea ("s390/mm: make hugepages_supported a boot time
decision") in preparation.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heiko noticed that the current check for hugepage support on s390 is a
little bit too harsh as systems which do not support will crash.
The reason is that pageblock_order can now get negative when we set
HPAGE_SHIFT to 0. To avoid all this and to avoid opening another can of
worms with enabling HUGETLB_PAGE_SIZE_VARIABLE I think it would be best
to simply allow architectures to define their own hugepages_supported().
This patch (of 4): revert commit cf54e2fce5 ("s390/mm: change
HPAGE_SHIFT type to int") in preparation.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
openrisc-allnoconfig:
kernel/uid16.c: In function 'SYSC_setgroups16':
kernel/uid16.c:184:2: error: implicit declaration of function 'groups_alloc'
kernel/uid16.c:184:13: warning: assignment makes pointer from integer without a cast
openrisc shouldn't be setting CONFIG_UID16 when CONFIG_MULTIUSER=n.
Fixes: 2813893f8b ("kernel: conditionally support non-root users, groups and capabilities")
Reported-by: Fengguang Wu <fengguang.wu@gmail.com>
Cc: Iulia Manda <iulia.manda21@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
K2E EVM boot hangs because of missing serdes driver which is needed to bring up
PCIe on K2E. These couple of fixes makes the PCIE disabled on common default and
let the specific board DTS to enable it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVqC4cAAoJEHJsHOdBp5c/EPoP/0tG+A0/m/h5NLU+7knX/vZK
puZKuVwB2maEzTowcImgZi7LN9RGUpUIIHYJepcRvf6R0IEcTkWMjMxFmwz26Xn4
u4eTOX27b7kRbtsqXFxogTqsFSmXkZNrm0Juf7oEi+RcD8Bx0ku/TZ5qbIFiaAS7
aF/3Q/2vBHiCH6QzAa6eILaMnoVd3zGUCPHJL59hIygVevcLG71IOV/U4vrfDFG9
ebHAjXPlZ0LhJAOaJVXEFPyir1HrblygwQR9ECPsylv0xAonyuxw79/0fpdIXIBw
ozJ8v91p1+LQwkF9GRsbDnUVFSOQoV+fB5KJGEE9qQAPktZp5mOVh+2QAO+hHzX6
TOvGXsEGxE59wf303/6dqSotN5QjUUY3UWGOZisgddgg4kKOSAodB9w/YOyuKwpf
7l0CRsEeCmlYrQOLAlyTcok3BbG6d8PTzDJ92fI6s2lFHb/CX2x57/deZWt+AU2L
KSHDXRrhCajWaJeiuACv6yme9DPHBE9RBdunLzUH5+Wsql1swB0ikE/sug9XXcIY
1i+NhlRW4QhFvs6lN3uNW3T7raT3Q+BY0mASEz3eeuOSV9AQotaXUfPbzpqsoL2m
clhghqkQeRvJFNjvu3UUG8AOHLpH3k24YFBm/NRhi3OXbLt8Yyw1fSdX/T7dqsYW
mUOIBQAa1EcCcnOFb07h
=BEOi
-----END PGP SIGNATURE-----
Merge tag 'keystone-dts-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes
Merge "ARM: Couple of dts fixes for v4.2-rcx" from Santosh Shilimkar:
Couple of DTS fixes 4.2-rcx for Keystone EVMs:
K2E EVM boot hangs because of missing serdes driver which is needed to bring up
PCIe on K2E. These couple of fixes makes the PCIE disabled on common default and
let the specific board DTS to enable it.
* tag 'keystone-dts-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: keystone: dts: rename pcie nodes to help override status
ARM: keystone: dts: fix dt bindings for PCIe
Signed-off-by: Olof Johansson <olof@lixom.net>
Fengguang Wu reports that building ARM with !MMU results in the
following build error:
arch/arm/kernel/built-in.o: In function `__soft_restart':
>> :(.text+0x1624): undefined reference to `arch_virt_to_idmap'
Fix this by adding an appropriate IS_ENABLED(CONFIG_MMU) into the
__virt_to_idmap() inline function.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
We must invalidate the L1 cache before enabling coherency, otherwise
secondary CPUs can inject invalid cache lines into the coherent CPU
cluster, which could then be migrated to other CPUs. This fixes a
recent regression with SoCFPGA randomly failing to boot.
Fixes: 02b4e2756e ("ARM: v7 setup function should invalidate L1 cache")
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
nr_bitmaps member of mapping structure stores the number of already
allocated bitmaps and it is interpreted as loop iterator (it starts from
0 not from 1), so a comparison against number of possible bitmap
extensions should include this fact. This patch fixes this by changing
the extension failure condition. This issue has been introduced by
commit 4d852ef8c2 ("arm: dma-mapping: Add
support to extend DMA IOMMU mappings").
Reported-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Hyungwon Hwang <human.hwang@samsung.com>
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
It's possible, albeit unlikely, that using the of_node here will
reference freed memory. Call of_node_put() after printing the
name to be safe.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch is to get correct physical address of the reset function for
PAE systems, which use aliased physical memory for booting.
See the "ARM: mm: Introduce virt_to_idmap() with an arch hook" for details.
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
It turns out to be rather tedious to test the NMI nesting code.
Make it easier: add a new CONFIG_DEBUG_ENTRY option that causes
the NMI handler to pre-emptively unmask NMIs.
With this option set, errors in the repeat_nmi logic or failures
to detect that we're in a nested NMI will result in quick panics
under perf (especially if multiple counters are running at high
frequency) instead of requiring an unusual workload that
generates page faults or breakpoints inside NMIs.
I called it CONFIG_DEBUG_ENTRY instead of CONFIG_DEBUG_NMI_ENTRY
because I want to add new non-NMI checks elsewhere in the entry
code in the future, and I'd rather not add too many new config
options or add this option and then immediately rename it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, "NMI executing" is one the first time an outermost
NMI hits repeat_nmi and zero thereafter. Change it to be zero
each time for consistency.
This is intended to help NMI handling fail harder if it's buggy.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Replace LEA; MOV with an equivalent SUB. This saves one
instruction.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have a tricky bug in the nested NMI code: if we see RSP
pointing to the NMI stack on NMI entry from kernel mode, we
assume that we are executing a nested NMI.
This isn't quite true. A malicious userspace program can point
RSP at the NMI stack, issue SYSCALL, and arrange for an NMI to
happen while RSP is still pointing at the NMI stack.
Fix it with a sneaky trick. Set DF in the region of code that
the RSP check is intended to detect. IRET will clear DF
atomically.
( Note: other than paravirt, there's little need for all this
complexity. We could check RIP instead of RSP. )
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Check the repeat_nmi .. end_repeat_nmi special case first. The
next patch will rework the RSP check and, as a side effect, the
RSP check will no longer detect repeat_nmi .. end_repeat_nmi, so
we'll need this ordering of the checks.
Note: this is more subtle than it appears. The check for
repeat_nmi .. end_repeat_nmi jumps straight out of the NMI code
instead of adjusting the "iret" frame to force a repeat. This
is necessary, because the code between repeat_nmi and
end_repeat_nmi sets "NMI executing" and then writes to the
"iret" frame itself. If a nested NMI comes in and modifies the
"iret" frame while repeat_nmi is also modifying it, we'll end up
with garbage. The old code got this right, as does the new
code, but the new code is a bit more explicit.
If we were to move the check right after the "NMI executing"
check, then we'd get it wrong and have random crashes.
( Because the "NMI executing" check would jump to the code that would
modify the "iret" frame without checking if the interrupted NMI was
currently modifying it. )
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I found the nested NMI documentation to be difficult to follow.
Improve the comments.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Returning to userspace is tricky: IRET can fail, and ESPFIX can
rearrange the stack prior to IRET.
The NMI nesting fixup relies on a precise stack layout and
atomic IRET. Rather than trying to teach the NMI nesting fixup
to handle ESPFIX and failed IRET, punt: run NMIs that came from
user mode on the normal kernel stack.
This will make some nested NMIs visible to C code, but the C
code is okay with that.
As a side effect, this should speed up perf: it eliminates an
RDMSR when NMIs come from user mode.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that do_nmi saves CR2, we don't need to save it in asm.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
32-bit kernels handle nested NMIs in C. Enable the exact same
handling on 64-bit kernels as well. This isn't currently
necessary, but it will become necessary once the asm code starts
allowing limited nesting.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix SMBIOS call handling and hwswitch state coherency in the dell-laptop driver.
Cleanups for intel_*_ipc drivers.
dell-laptop:
- Do not cache hwswitch state
- Check return value of each SMBIOS call
- Clear buffer before each SMBIOS call
intel_scu_ipc:
- Move local memory initialization out of a mutex
intel_pmc_ipc:
- Update kerneldoc formatting
- Fix compiler casting warnings
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVqCrgAAoJEKbMaAwKp364aBcIALo/ZB6JFFd3oFDBbZR9bzvp
senrgC2QSWboFlyJ2aHB09n98m6tR5x8HTE6BijT64bUyPSLTPgDZoeC9ezIu1H0
rXKJZM7GduxYVOvVgOPVKqt/yUopI55jDhpgvFmxpXgp9zaz4our2y+93VCCBkIm
9nJMHXIvK+Rg4Rg0MuEkaghLRFivJAYFuyFu6vgWQOGap1QXruPIylK6agZs2E9x
KhJAlLNjoAAfqFFkWdk7PxMO8QIgV9pLU8RlOQmUdRSe8F+CI3AAJjdn+FdPoXFN
EBirxMm8NAd9+/JlfU95fUBwPnofY+D3Q8jUyKBBxnZbDQMIA6gWtzGaA/BY/zI=
=hpkC
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.2-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Fix SMBIOS call handling and hwswitch state coherency in the
dell-laptop driver. Cleanups for intel_*_ipc drivers. Details:
dell-laptop:
- Do not cache hwswitch state
- Check return value of each SMBIOS call
- Clear buffer before each SMBIOS call
intel_scu_ipc:
- Move local memory initialization out of a mutex
intel_pmc_ipc:
- Update kerneldoc formatting
- Fix compiler casting warnings"
* tag 'platform-drivers-x86-v4.2-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
intel_scu_ipc: move local memory initialization out of a mutex
intel_pmc_ipc: Update kerneldoc formatting
dell-laptop: Do not cache hwswitch state
dell-laptop: Check return value of each SMBIOS call
dell-laptop: Clear buffer before each SMBIOS call
intel_pmc_ipc: Fix compiler casting warnings
Pull m68knommu/coldfire fixes from Greg Ungerer:
"Contains build fixes and updates for the ColdFire defconfigs.
Specifically there is a couple of fixes that address problems building
allnoconfig. Also fix for enabling PCI bus on the M54xx family of
ColdFire"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: enable PCI support for m5475evb defconfig
m68k: fix io functions for ColdFire/MMU/PCI case
m68knommu: update defconfig for ColdFire m5475evb
m68knommu: update defconfig for ColdFire m5407c3
m68knommu: update defconfig for ColdFire m5307c3
m68knommu: update defconfig for ColdFire m5275evb
m68knommu: update defconfig for ColdFire m5272c3
m68knommu: update defconfig for ColdFire m5249evb
m68knommu: update defconfig for m5208evb
m68knommu: make ColdFire SoC selection a choice
m68knommu: improve the clock configuration defaults
m68knommu: force setting of CONFIG_CLOCK_FREQ for ColdFire
Now that PCIe DT binding is disabled in SoC specific DTS,
we need a way to override it in a board specific DTS. So
rename the PCIe nodes accordingly.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Currently PCIe DT bindings are broken. PCIe driver can't function
without having a SerDes driver that provide the phy configuration.
On K2E EVM, this causes problem since the EVM has Marvell SATA
controller present and with default values in the SerDes register,
it seems to pass the PCIe link check, but causes issues since
the configuration is not correct. The manifestation is that when
EVM is booted with NFS rootfs, the boot hangs. We shouldn't enable
PCIe on this EVM since to work, SerDes driver has to be present as
well. So by default, the PCIe DT binding should be disabled in SoC
specific DTS. It can be enabled in the board specific DTS when the
SerDes device driver is also present.
So fix the status of PCIe DT bindings in the SoC specific DTS to
"disabled". To enable PCIe, the status should be set to "ok" in
the EVM DTS file when SerDes driver support becomes available in
the upstream tree.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Since dm9000 driver added support for a vcc regulator, platform data
based platforms have their ethernet broken, as the regulator claiming
returns -EPROBE_DEFER and prevents dm9000 loading.
This patch fixes this for all pxa boards using dm9000, by using the
specific regulator_has_full_constraints() function.
This was discovered and tested on the cm-x300 board.
Fixes: 7994fe55a4 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
GPMC smart idle is not really broken but it does not support
smart idle with wakeup.
Fixes: 556708fe87 ("ARM: OMAP: DRA7: hwmod: Make gpmc software supervised as the smart idle is broken")
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
- Makefile changes (top-level+ARC) reinstates -O3 builds (regression since 3.16)
- IDU intc related fixes, IRQ affinity
- patch to make bitops safer for ARC
- perf fix from Alexey to remove signed PC braino
- Futex backend gets llock/scond support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CWXf
-----END PGP SIGNATURE-----
Merge tag 'arc-v4.2-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Makefile changes (top-level+ARC) reinstates -O3 builds (regression
since 3.16)
- IDU intc related fixes, IRQ affinity
- patch to make bitops safer for ARC
- perf fix from Alexey to remove signed PC braino
- Futex backend gets llock/scond support
* tag 'arc-v4.2-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: support HS38 releases
ARC: make sure instruction_pointer() returns unsigned value
ARC: slightly refactor macros for boot logging
ARC: Add llock/scond to futex backend
arc:irqchip: prepare for drivers/irqchip/irqchip.h removal
ARC: Make ARC bitops "safer" (add anti-optimization)
ARCv2: [axs103] bump CPU frequency from 75 to 90 MHZ
ARCv2: intc: IDU: Fix potential race in installing a chained IRQ handler
ARCv2: intc: IDU: support irq affinity
ARC: fix unused var wanring
ARC: Don't memzero twice in dma_alloc_coherent for __GFP_ZERO
ARC: Override toplevel default -O2 with -O3
kbuild: Allow arch Makefiles to override {cpp,ld,c}flags
ARCv2: guard SLC DMA ops with spinlock
ARC: Kconfig: better way to disable ARC_HAS_LLSC for ARC_CPU_750D
Pull s390 fixes from Martin Schwidefsky:
"One improvement for the zcrypt driver, the quality attribute for the
hwrng device has been missing. Without it the kernel entropy seeding
will not happen automatically.
And six bug fixes, the most important one is the fix for the vector
register corruption due to machine checks"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/nmi: fix vector register corruption
s390/process: fix sfpc inline assembly
s390/dasd: fix kernel panic when alias is set offline
s390/sclp: clear upper register halves in _sclp_print_early
s390/oprofile: fix compile error
s390/sclp: fix compile error
s390/zcrypt: enable s390 hwrng to seed kernel entropy
Backmerge fixes since it's getting out of hand again with the massive
split due to atomic between -next and 4.2-rc. All the bugfixes in
4.2-rc are addressed already (by converting more towards atomic
instead of minimal duct-tape) so just always pick the version in next
for the conflicts in modeset code.
All the other conflicts are just adjacent lines changed.
Conflicts:
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem_gtt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_ringbuffer.h
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
- Fix up LCD panel name for overo boards
- Three fixes for pepper board for regulators, freqeuncy
scaling and audio input. Note that there is still one
issue being worked on for booting with multi_v7_defconfig
- Add missing #iommu-cells for omap4 and 5
- Add missing HAVE_ARM_SCU for am43xx
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MPTh
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.2/fixes-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps, all dts changes except for one:
- Fix up LCD panel name for overo boards
- Three fixes for pepper board for regulators, freqeuncy
scaling and audio input. Note that there is still one
issue being worked on for booting with multi_v7_defconfig
- Add missing #iommu-cells for omap4 and 5
- Add missing HAVE_ARM_SCU for am43xx
* tag 'omap-for-v4.2/fixes-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (210 commits)
ARM: dts: Correct audio input route & set mic bias for am335x-pepper
ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX
ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs
ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs
ARM: dts: Fix frequency scaling on Gumstix Pepper
ARM: dts: configure regulators for Gumstix Pepper
ARM: dts: omap3: overo: Update LCD panel names
+ Linux 4.2-rc2
Signed-off-by: Olof Johansson <olof@lixom.net>
Audio-in was incorrectly routed to Line In. It should be Mic3L as per
schematic.
Using mic-bias voltage at 2.0v (<0x1>) does not work for some reason. There
is no voltage seen on micbias (R127). Mic-bias voltage of 2.5v (<0x2>) works.
I see voltage of 2.475v across GND and micbias.
With these changes, I can record audio with a pair of proliferate TRRS earbuds.
Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com>
Acked-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
CONFIG_HAVE_ARM_SCU only gets selected if CONFIG_SMP is selected in an OMAP
system, however AM43XX needs this option regardless of CONFIG_SMP and also
for an AM43XX only build as it is important for controlling power in the SoC.
Without this we cannot suspend the CPU for SoC suspend or cpuidle. The
ARM Cortex A9 needs SCU CPU Power Status bits to be set to off mode in order
for the PRCM to transition the MPU to low power modes.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
- Correct compatible string for i.MX27 GPT which actually shares the
same programming model as i.MX21 GPT rather than i.MX1 one.
- Add missing #io-channel-cells property for i.MX23 LRADC device, which
is required for the device to be an IIO provider.
- Correct HSYNC/VSYNC pins and add ddc-i2c-bus property for TVE device
on imx53-qsb to work properly.
- Always enable PU domain if CONFIG_PM is not set. This fixes a couple
of failure scenarios which will hang the system if one of the devices
in the PU domain is accessed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVpSvYAAoJEFBXWFqHsHzOdmgIAIgL1Gh4S/umoKyl99W92EZi
MmHGYntT0ZYXEwdzrPeBnWhXVyqKydo6qR43OxC98vmD6hATYHC9l3U/v6HXfQ6l
k4dovYELyGWKFvPh8An8fodcGzOxQDhJCjSeTpowAzI8nYrUeiZ7TzjJqs1YezZQ
yjoI+dsbvO2SBubErgsnM4dLFYhhfyeZk6ey7P9A/HY7Beh2JTEw2OMraFPF8I11
la1bnQqfl5bAG9M54yCE86ho5V/VT9DqKsnM9dYkUMTTJoEFLhOFQ5FvqQacEh6U
BdX/ZK3JTeLBFr1kieCe0yzpSWCxfz0BEIVhps6gFpWixMRzABx4LY8LBDp23LU=
=YZv+
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Merge "ARM: imx: fixes for 4.2" from Shawn Guo:
The i.MX fixes for 4.2:
- Correct compatible string for i.MX27 GPT which actually shares the
same programming model as i.MX21 GPT rather than i.MX1 one.
- Add missing #io-channel-cells property for i.MX23 LRADC device, which
is required for the device to be an IIO provider.
- Correct HSYNC/VSYNC pins and add ddc-i2c-bus property for TVE device
on imx53-qsb to work properly.
- Always enable PU domain if CONFIG_PM is not set. This fixes a couple
of failure scenarios which will hang the system if one of the devices
in the PU domain is accessed.
* tag 'imx-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set
ARM: dts: imx53-qsb: fix TVE entry
ARM: dts: mx23: fix iio-hwmon support
ARM: dts: imx27: Adjust the GPT compatible string
Signed-off-by: Olof Johansson <olof@lixom.net>
Boris reported that the sparse_irq protection around __cpu_up() in the
generic code causes a regression on Xen. Xen allocates interrupts and
some more in the xen_cpu_up() function, so it deadlocks on the
sparse_irq_lock.
There is no simple fix for this and we really should have the
protection for all architectures, but for now the only solution is to
move it to x86 where actual wreckage due to the lack of protection has
been observed.
Reported-and-tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Fixes: a899418167 'hotplug: Prevent alloc/free of irq descriptors during cpu up/down'
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: xiao jin <jin.xiao@intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Cc: xen-devel <xen-devel@lists.xenproject.org>
Pass 1 parts had a number of significant erratas and were only available
in small numbers and under NDA. Full support also required the use of a
special toolchain that kept branches properly aligned. These workarounds
were never upstreamed and the only toolchain known to have them is
Montavista's GCC 3.0-based toolchain which completly obsoleted if not
useless these days.
So now that automated testing has tripped over the user of the
-msb1-pass1-workarounds option, rather than fixing it remove support for
pass 1 parts.
Probably nobody will notice. I seem to own the last know pass 1 board
and I haven't noticed another one in the wild in the past decade, at
least.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS32r6 code requires FP64 (ie. FR=1) support. Building a kernel with
support for MIPS32r6 binaries but without support for O32 with FP64 is
therefore a problem which can lead to incorrectly executed userland.
CONFIG_MIPS_O32_FP64_SUPPORT is already selected when the kernel is
configured for MIPS32r6, but not when the kernel is configured for
MIPS64r6 with O32 compat support. Select CONFIG_MIPS_O32_FP64_SUPPORT in
such configurations to prevent building kernels which execute MIPS32r6
userland incorrectly.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # v4.0-
Cc: linux-mips@linux-mips.org
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10674/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ux500 is regressing due to commit
a21763a0b1
"pinctrl: nomadik: activate strict mux mode" which disallows
Nomadik GPIO 5 to be muxed in as a level shifter voltage select
pin, as it is currently described as being used for RX on UART1.
The behaviour is correct, instead the hardware config has been
incorrecly specified: UART1 is indeed unused on HREFv60plus and
Snowball and that is why HREFv60plus can use the pins it would
normally occupy as the voltage select line for the MMC/SD
levelshifter (Snowball uses it for I2C4).
The reason UART1 was anyway enabled on these platforms was
probably to secure the port enumeration to userspace. This
can be solved by using aliases (done in a separate patch) so
we can now deactivate UART1 and let MMC/SD use it properly
on HREFv60plus. We explicitly activate it only for the
older HREFprev60 board.
To complete, we set up the pin configuration for these pins
properly in the sdi0 node.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This enumerates the PL011 serial ports on the Ux500. This is
necessary to do if we want to remove one of the serial ports,
since userspace depends on console to be present on ttyAMA2
and we must not break userspace.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add missing #iommu-cells property to the DSP and IPU IOMMU nodes
for OMAP5 platforms. This property is required as per the generic
iommu binding.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add missing #iommu-cells property to the DSP and IPU IOMMU nodes
for OMAP4 platforms. This property is required as per the generic
iommu binding.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The device tree for Gumstix Pepper has DCDC2 and
DCDC3 correctly labelled but the upper limit values
are wrong. The confusion is due to the hardware
quirk where the DCDC2 and DCDC3 wires are flipped
in Pepper.
Signed-off-by: Arun Bharadwaj <arun@gumstix.com>
Tested-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Boot process is halting in midway because some of the necessary voltage
regulators are deemed unused and subsequently powered off, leading to
a completely unresponsive system.
Most of the device nodes had correct voltage regulator attachments.
Yet these nodes had to set stricter enforcement on them through
'regulator-boot-on' and 'regulator-always-on' to function correctly.
The consumers of the regulators this commit affect are the followings:
DCDC1: vdd_1v8 system supply, USB-PHY, and ADC
DCDC2: Core domain
DCDC3: MPU core domain
LDO1: RTC
LDO2: 3v3 IO domain
LDO3: USB-PHY; not a boot-time requirement
LDO4: LCD [16:23]
All but LDO3 need to be always-on for the system to be functional.
Additionally regulator-name properties have been added for the kernel to
display the name from the schematic. This will improve diagnostics.
Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
For Gumstix Overo COMs, the u-boot bootloader typically passes an
argument specifying the default display via the omapdss.def_disp
parameter. When a default display is specified, DSS2 tries to match
this name with either the device tree label (e.g. label=dvi) or,
failing this, the device tree alias (e.g. label=display0). Update the
panel names for the 'lcd43' and 'lcd35' displays in the device tree
such that they match the names passed by u-boot.
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add support for 4 Japanese keys
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull networking fixes from David Miller:
1) Missing list head init in bluetooth hidp session creation, from Tedd
Ho-Jeong An.
2) Don't leak SKB in bridge netfilter error paths, from Florian
Westphal.
3) ipv6 netdevice private leak in netfilter bridging, fixed by Julien
Grall.
4) Fix regression in IP over hamradio bpq encapsulation, from Ralf
Baechle.
5) Fix race between rhashtable resize events and table walks, from Phil
Sutter.
6) Missing validation of IFLA_VF_INFO netlink attributes, fix from
Daniel Borkmann.
7) Missing security layer socket state initialization in tipc code,
from Stephen Smalley.
8) Fix shared IRQ handling in boomerang 3c59x interrupt handler, from
Denys Vlasenko.
9) Missing minor_idr destroy on module unload on macvtap driver, from
Johannes Thumshirn.
10) Various pktgen kernel thread races, from Oleg Nesterov.
11) Fix races that can cause packets to be processed in the backlog even
after a device attached to that SKB has been fully unregistered.
From Julian Anastasov.
12) bcmgenet driver doesn't account packet drops vs. errors properly,
fix from Petri Gynther.
13) Array index validation and off by one fix in DSA layer from Florian
Fainelli
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (66 commits)
can: replace timestamp as unique skb attribute
ARM: dts: dra7x-evm: Prevent glitch on DCAN1 pinmux
can: c_can: Fix default pinmux glitch at init
can: rcar_can: unify error messages
can: rcar_can: print request_irq() error code
can: rcar_can: fix typo in error message
can: rcar_can: print signed IRQ #
can: rcar_can: fix IRQ check
net: dsa: Fix off-by-one in switch address parsing
net: dsa: Test array index before use
net: switchdev: don't abort unsupported operations
net: bcmgenet: fix accounting of packet drops vs errors
cdc_ncm: update specs URL
Doc: z8530book: Fix typo in API-z8530-sync-txdma-open.html
net: inet_diag: always export IPV6_V6ONLY sockopt for listening sockets
bridge: mdb: allow the user to delete mdb entry if there's a querier
net: call rcu_read_lock early in process_backlog
net: do not process device backlog during unregistration
bridge: fix potential crash in __netdev_pick_tx()
net: axienet: Fix devm_ioremap_resource return value check
...
If a machine check happens, the machine has the vector facility installed
and the extended save area exists, the cpu will save vector register
contents into the extended save area. This is regardless of control
register 0 contents, which enables and disables the vector facility during
runtime.
On each machine check we should validate the vector registers. The current
code however tries to validate the registers only if the running task is
using vector registers in user space.
However even the current code is broken and causes vector register
corruption on machine checks, if user space uses them:
the prefix area contains a pointer (absolute address) to the machine check
extended save area. In order to save some space the save area was put into
an unused area of the second prefix page.
When validating vector register contents the code uses the absolute address
of the extended save area, which is wrong. Due to prefixing the vector
instructions will then access contents using absolute addresses instead
of real addresses, where the machine stored the contents.
If the above would work there is still the problem that register validition
would only happen if user space uses vector registers. If kernel space uses
them also, this may also lead to vector register content corruption:
if the kernel makes use of vector instructions, but the current running
user space context does not, the machine check handler will validate
floating point registers instead of vector registers.
Given the fact that writing to a floating point register may change the
upper halve of the corresponding vector register, we also experience vector
register corruption in this case.
Fix all of these issues, and always validate vector registers on each
machine check, if the machine has the vector facility installed and the
extended save area is defined.
Cc: <stable@vger.kernel.org> # 4.1+
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The sfpc inline assembly within execve_tail() may incorrectly set bits
28-31 of the sfpc instruction to a value which is not zero.
These bits however are currently unused and therefore should be zero
so we won't get surprised if these bits will be used in the future.
Therefore remove the second operand from the inline assembly.
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently instruction_pointer() returns pt_regs->ret and so return value
is of type "long", which implicitly stands for "signed long".
While that's perfectly fine when dealing with 32-bit values if return
value of instruction_pointer() gets assigned to 64-bit variable sign
extension may happen.
And at least in one real use-case it happens already.
In perf_prepare_sample() return value of perf_instruction_pointer()
(which is an alias to instruction_pointer() in case of ARC) is assigned
to (struct perf_sample_data)->ip (which type is "u64").
And what we see if instuction pointer points to user-space application
that in case of ARC lays below 0x8000_0000 "ip" gets set properly with
leading 32 zeros. But if instruction pointer points to kernel address
space that starts from 0x8000_0000 then "ip" is set with 32 leadig
"f"-s. I.e. id instruction_pointer() returns 0x8100_0000, "ip" will be
assigned with 0xffff_ffff__8100_0000. Which is obviously wrong.
In particular that issuse broke output of perf, because perf was unable
to associate addresses like 0xffff_ffff__8100_0000 with anything from
/proc/kallsyms.
That's what we used to see:
----------->8----------
6.27% ls [unknown] [k] 0xffffffff8046c5cc
2.96% ls libuClibc-0.9.34-git.so [.] memcpy
2.25% ls libuClibc-0.9.34-git.so [.] memset
1.66% ls [unknown] [k] 0xffffffff80666536
1.54% ls libuClibc-0.9.34-git.so [.] 0x000224d6
1.18% ls libuClibc-0.9.34-git.so [.] 0x00022472
----------->8----------
With that change perf output looks much better now:
----------->8----------
8.21% ls [kernel.kallsyms] [k] memset
3.52% ls libuClibc-0.9.34-git.so [.] memcpy
2.11% ls libuClibc-0.9.34-git.so [.] malloc
1.88% ls libuClibc-0.9.34-git.so [.] memset
1.64% ls [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore
1.41% ls [kernel.kallsyms] [k] __d_lookup_rcu
----------->8----------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-linux-dev@synopsys.com
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The ColdFire M5475 on the m5475evb board supports a PCI bus, lets
enable it for the defconfig to get better build and test coverage.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
The inb/outb/... family of IO methods end up being multiply defined when
building PCI support for the ColdFire. Compiling gives this:
CC init/main.o
In file included from ./arch/m68k/include/asm/io.h:4:0,
from include/linux/bio.h:30,
from include/linux/blkdev.h:18,
from init/main.c:75:
./arch/m68k/include/asm/io_mm.h:420:0: warning: "inb" redefined
./arch/m68k/include/asm/io_mm.h:108:0: note: this is the location of the previous definition
...
The ColdFire/PCI case defines its own IO access methods, so no others
should be defined or used in this case. Conditionally disable other
definitions that clash with it.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
It would be nice if we could support multiple ColdFire SoC types in a
single binary - but currently the code simply does not support it.
Change the SoC selection config options to be a choice instead of
individual selectable entries.
This fixes problems with building allnoconfig, and means that a sane
linux kernel is generated for a single ColdFire SoC type.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Create some intelligent default settings for each ColdFire SoC type
in the configuration entry for CONFIG_CLOCK_FREQ.
The ColdFire clock frequency is configurable at build time. There is a
lot of variation in the frequency of operation on specific ColdFire based
boards. But we can choose a default that matches the maximum frequency
of clock operation for a particular ColdFire part. That is typically
the most common clock setting.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
It is possible to disable the clock selection at configuration time,
but for ColdFire targets we always expect a clock frequency to be
selected. This results in the following compile time error:
CC arch/m68k/kernel/asm-offsets.s
In file included from ./arch/m68k/include/asm/timex.h:14:0,
from include/linux/timex.h:65,
from include/linux/sched.h:19,
from arch/m68k/kernel/asm-offsets.c:14:
./arch/m68k/include/asm/coldfire.h:25:2: error: #error "Don't know what your ColdFire CPU clock frequency is??"
Remove CONFIG_CLOCK_SELECT completely and always enable CONFIG_CLOCK_FREQ
for ColdFire.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Pull MIPS fixes from Ralf Baechle:
"A fair number of 4.2 fixes also because Markos opened the flood gates.
- Patch up the math used calculate the location for the page bitmap.
- The FDC (Not what you think, FDC stands for Fast Debug Channel) IRQ
around was causing issues on non-Malta platforms, so move the code
to a Malta specific location.
- A spelling fix replicated through several files.
- Fix to the emulation of an R2 instruction for R6 cores.
- Fix the JR emulation for R6.
- Further patching of mindless 64 bit issues.
- Ensure the kernel won't crash on CPUs with L2 caches with >= 8
ways.
- Use compat_sys_getsockopt for O32 ABI on 64 bit kernels.
- Fix cache flushing for multithreaded cores.
- A build fix"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: O32: Use compat_sys_getsockopt.
MIPS: c-r4k: Extend way_string array
MIPS: Pistachio: Support CDMM & Fast Debug Channel
MIPS: Malta: Make GIC FDC IRQ workaround Malta specific
MIPS: c-r4k: Fix cache flushing for MT cores
Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit"
MIPS: cps-vec: Use macros for various arithmetics and memory operations
MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit
MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2
MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA
MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer casting
MIPS: Fix erroneous JR emulation for MIPS R6
MIPS: Fix branch emulation for BLTC and BGEC instructions
MIPS: kernel: traps: Fix broken indentation
MIPS: bootmem: Don't use memory holes for page bitmap
MIPS: O32: Do not handle require 32 bytes from the stack to be readable.
MIPS, CPUFREQ: Fix spelling of Institute.
MIPS: Lemote 2F: Fix build caused by recent mass rename.
Driver core sets "default" pinmux on on probe and CAN driver
sets "sleep" pinmux during register. This causes a small window
where the CAN pins are in "default" state with the DCAN module
being disabled.
Change the "default" state to be like sleep so this glitch is
avoided. Add a new "active" state that is used by the driver
when CAN is actually active.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pull x86 fixes from Thomas Gleixner:
- the high latency PIT detection fix, which slipped through the cracks
for rc1
- a regression fix for the early printk mechanism
- the x86 part to plug irq/vector related hotplug races
- move the allocation of the espfix pages on cpu hotplug to non atomic
context. The current code triggers a might_sleep() warning.
- a series of KASAN fixes addressing boot crashes and usability
- a trivial typo fix for Kconfig help text
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text
x86/irq: Retrieve irq data after locking irq_desc
x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable()
x86/irq: Plug irq vector hotplug race
x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8'
x86/espfix: Init espfix on the boot CPU side
x86/espfix: Add 'cpu' parameter to init_espfix_ap()
x86/kasan: Move KASAN_SHADOW_OFFSET to the arch Kconfig
x86/kasan: Add message about KASAN being initialized
x86/kasan: Fix boot crash on AMD processors
x86/kasan: Flush TLBs after switching CR3
x86/kasan: Fix KASAN shadow region page tables
x86/init: Clear 'init_level4_pgt' earlier
x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()
Pull timer fixes from Thomas Gleixner:
"This update from the timer departement contains:
- A series of patches which address a shortcoming in the tick
broadcast code.
If the broadcast device is not available or an hrtimer emulated
broadcast device, some of the original assumptions lead to boot
failures. I rather plugged all of the corner cases instead of only
addressing the issue reported, so the change got a little larger.
Has been extensivly tested on x86 and arm.
- Get rid of the last holdouts using do_posix_clock_monotonic_gettime()
- A regression fix for the imx clocksource driver
- An update to the new state callbacks mechanism for clockevents.
This is required to simplify the conversion, which will take place
in 4.3"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/broadcast: Prevent NULL pointer dereference
time: Get rid of do_posix_clock_monotonic_gettime
cris: Replace do_posix_clock_monotonic_gettime()
tick/broadcast: Unbreak CONFIG_GENERIC_CLOCKEVENTS=n build
tick/broadcast: Handle spurious interrupts gracefully
tick/broadcast: Check for hrtimer broadcast active early
tick/broadcast: Return busy when IPI is pending
tick/broadcast: Return busy if periodic mode and hrtimer broadcast
tick/broadcast: Move the check for periodic mode inside state handling
tick/broadcast: Prevent deep idle if no broadcast device available
tick/broadcast: Make idle check independent from mode and config
tick/broadcast: Sanity check the shutdown of the local clock_event
tick/broadcast: Prevent hrtimer recursion
clockevents: Allow set-state callbacks to be optional
clocksource/imx: Define clocksource for mx27
A fairly random colletion of fixes based on -rc1 for OMAP, sunxi and
prima2 as well as a few arm64-specific DT fixes.
This series also includes a late to support a new Allwinner (sunxi)
SoC, but since it's rather simple and isolated to the
platform-specific code, it's included it for this -rc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UEUK
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Kevin Hilman:
"A fairly random colletion of fixes based on -rc1 for OMAP, sunxi and
prima2 as well as a few arm64-specific DT fixes.
This series also includes a late to support a new Allwinner (sunxi)
SoC, but since it's rather simple and isolated to the
platform-specific code, it's included it for this -rc"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG
arm: dts: vexpress: add missing CCI PMU device node to TC2
arm: dts: vexpress: describe all PMUs in TC2 dts
GICv3: Add ITS entry to THUNDER dts
arm64: dts: Add poweroff button device node for APM X-Gene platform
ARM: dts: am4372.dtsi: disable rfbi
ARM: dts: am57xx-beagle-x15: Provide supply for usb2_phy2
ARM: dts: am4372: Add emif node
Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep"
ARM: sunxi: Enable simplefb in the defconfig
ARM: Remove deprecated symbol from defconfig files
ARM: sunxi: Add Machine support for A33
ARM: sunxi: Introduce Allwinner H3 support
Documentation: sunxi: Update Allwinner SoC documentation
ARM: prima2: move to use REGMAP APIs for rtciobrg
ARM: dts: atlas7: add pinctrl and gpio descriptions
ARM: OMAP2+: Remove unnessary return statement from the void function, omap2_show_dma_caps
memory: omap-gpmc: Fix parsing of devices
Pull parisc fixes from Helge Deller:
"We have one important patch from Dave Anglin and myself which fixes
PTE/TLB race conditions which caused random segmentation faults on our
debian buildd servers, and one patch from Alex Ivanov which speeds up
the graphical text console on the STI framebuffer driver"
* 'parisc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix some PTE/TLB race conditions and optimize __flush_tlb_range based on timing results
stifb: Implement hardware accelerated copyarea
The increased use of pdtlb/pitlb instructions seemed to increase the
frequency of random segmentation faults building packages. Further, we
had a number of cases where TLB inserts would repeatedly fail and all
forward progress would stop. The Haskell ghc package caused a lot of
trouble in this area. The final indication of a race in pte handling was
this syslog entry on sibaris (C8000):
swap_free: Unused swap offset entry 00000004
BUG: Bad page map in process mysqld pte:00000100 pmd:019bbec5
addr:00000000ec464000 vm_flags:00100073 anon_vma:0000000221023828 mapping: (null) index:ec464
CPU: 1 PID: 9176 Comm: mysqld Not tainted 4.0.0-2-parisc64-smp #1 Debian 4.0.5-1
Backtrace:
[<0000000040173eb0>] show_stack+0x20/0x38
[<0000000040444424>] dump_stack+0x9c/0x110
[<00000000402a0d38>] print_bad_pte+0x1a8/0x278
[<00000000402a28b8>] unmap_single_vma+0x3d8/0x770
[<00000000402a4090>] zap_page_range+0xf0/0x198
[<00000000402ba2a4>] SyS_madvise+0x404/0x8c0
Note that the pte value is 0 except for the accessed bit 0x100. This bit
shouldn't be set without the present bit.
It should be noted that the madvise system call is probably a trigger for many
of the random segmentation faults.
In looking at the kernel code, I found the following problems:
1) The pte_clear define didn't take TLB lock when clearing a pte.
2) We didn't test pte present bit inside lock in exception support.
3) The pte and tlb locks needed to merged in order to ensure consistency
between page table and TLB. This also has the effect of serializing TLB
broadcasts on SMP systems.
The attached change implements the above and a few other tweaks to try
to improve performance. Based on the timing code, TLB purges are very
slow (e.g., ~ 209 cycles per page on rp3440). Thus, I think it
beneficial to test the split_tlb variable to avoid duplicate purges.
Probably, all PA 2.0 machines have combined TLBs.
I dropped using __flush_tlb_range in flush_tlb_mm as I realized all
applications and most threads have a stack size that is too large to
make this useful. I added some comments to this effect.
Since implementing 1 through 3, I haven't had any random segmentation
faults on mx3210 (rp3440) in about one week of building code and running
as a Debian buildd.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Helge Deller <deller@gmx.de>
- opal-prd mmap fix from Vaidy.
- Set kernel taint for MCEs from Daniel.
- Alignment exception description from Anton.
- ppc4xx_hsta_msi build fix from Daniel
- opal-elog interrupt fix from Alistair.
- core_idle_state race fix from Shreyas.
- hv-24x7 lockdep fix from Sukadev.
- Multiple cxl fixes from Daniel, Ian, Mikey & Maninder.
- Update MAINTAINERS to point at shared tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+CJX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- opal-prd mmap fix from Vaidy
- set kernel taint for MCEs from Daniel
- alignment exception description from Anton
- ppc4xx_hsta_msi build fix from Daniel
- opal-elog interrupt fix from Alistair
- core_idle_state race fix from Shreyas
- hv-24x7 lockdep fix from Sukadev
- multiple cxl fixes from Daniel, Ian, Mikey & Maninder
- update MAINTAINERS to point at shared tree
* tag 'powerpc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
cxl: Check if afu is not null in cxl_slbia
powerpc: Update MAINTAINERS to point at shared tree
powerpc/perf/24x7: Fix lockdep warning
cxl: Fix off by one error allowing subsequent mmap page to be accessed
cxl: Fail mmap if requested mapping is larger than assigned problem state area
cxl: Fix refcounting in kernel API
powerpc/powernv: Fix race in updating core_idle_state
powerpc/powernv: Fix opal-elog interrupt handler
powerpc/ppc4xx_hsta_msi: Include ppc-pci.h to fix reference to hose_list
powerpc: Add plain English description for alignment exception oopses
cxl: Test the correct mmio space before unmapping
powerpc: Set the correct kernel taint on machine check errors
cxl/vphb.c: Use phb pointer after NULL check
powerpc/powernv: Fix vma page prot flags in opal-prd driver
We currently set x27 in compat_sys_sigreturn_wrapper and
compat_sys_rt_sigreturn_wrapper, similarly to what we do with r8/why on
32-bit ARM, in an attempt to prevent sigreturns from being restarted.
However, on arm64 we have always used pt_regs::syscallno for syscall
restarting (for both native and compat tasks), and x27 is never
inspected again before being overwritten in kernel_exit.
This patch removes the pointless register assignments.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently guest MTRR is avoided if kvm_is_reserved_pfn returns true.
However, the guest could prefer a different page type than UC for
such pages. A good example is that pass-throughed VGA frame buffer is
not always UC as host expected.
This patch enables full use of virtual guest MTRRs.
Suggested-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Tested-by: Joerg Roedel <jroedel@suse.de> (on AMD)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When hardware supports the g_pat VMCB field, we can use it for emulating
the PAT configuration that the guest configures by writing to the
corresponding MSR.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, NPT page attributes are not used, and the final page
attribute depends solely on gPAT (which however is not synced
correctly), the guest MTRRs and the guest page attributes.
However, we can do better by mimicking what is done for VMX.
In the absence of PCI passthrough, the guest PAT can be ignored
and the page attributes can be just WB. If passthrough is being
used, instead, keep respecting the guest PAT, and emulate the guest
MTRRs through the PAT field of the nested page tables.
The only snag is that WP memory cannot be emulated correctly,
because Linux's default PAT setting only includes the other types.
Tested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If there are no assigned devices, the guest PAT are not providing
any useful information and can be overridden to writeback; VMX
always does this because it has the "IPAT" bit in its extended
page table entries, but SVM does not have anything similar.
Hook into VFIO and legacy device assignment so that they
provide this information to KVM.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
fpu_activate is called outside of vcpu_load(), which means it should not
touch VMCS, but fpu_activate needs to. Avoid the call by moving it to a
point where we know that the guest needs eager FPU and VMCS is loaded.
This will get rid of the following trace
vmwrite error: reg 6800 value 0 (err 1)
[<ffffffff8162035b>] dump_stack+0x19/0x1b
[<ffffffffa046c701>] vmwrite_error+0x2c/0x2e [kvm_intel]
[<ffffffffa045f26f>] vmcs_writel+0x1f/0x30 [kvm_intel]
[<ffffffffa04617e5>] vmx_fpu_activate.part.61+0x45/0xb0 [kvm_intel]
[<ffffffffa0461865>] vmx_fpu_activate+0x15/0x20 [kvm_intel]
[<ffffffffa0560b91>] kvm_arch_vcpu_create+0x51/0x70 [kvm]
[<ffffffffa0548011>] kvm_vm_ioctl+0x1c1/0x760 [kvm]
[<ffffffff8118b55a>] ? handle_mm_fault+0x49a/0xec0
[<ffffffff811e47d5>] do_vfs_ioctl+0x2e5/0x4c0
[<ffffffff8127abbe>] ? file_has_perm+0xae/0xc0
[<ffffffff811e4a51>] SyS_ioctl+0xa1/0xc0
[<ffffffff81630949>] system_call_fastpath+0x16/0x1b
(Note: we also unconditionally activate FPU in vmx_vcpu_reset(), so the
removed code added nothing.)
Fixes: c447e76b4c ("kvm/fpu: Enable eager restore kvm FPU for MPX")
Cc: <stable@vger.kernel.org>
Reported-by: Vlastimil Holer <vlastimil.holer@gmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The call to get_mt_mask was really using kvm_is_reserved_pfn to
detect an MMIO-backed page. In this case, we want "false" to be
returned for the zero page.
Reintroduce a separate kvm_is_mmio_pfn predicate for this use
only.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We were using the native syscall and that results in subtle breakage.
This is the same issue as fixed in 077d0e6561
(MIPS: N32: Use compat getsockopt syscall) but that commit did fix it only
for N32.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=100291
The L2 cache in the I6400 core has 16 ways, so extend the way_string
array to take such caches into account.
[ralf@linux-mips.org: Other already supported CPUs are free to support
more than 8 ways of cache as well.]
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10640/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Implement the mips_cdmm_phys_base() platform callback to provide a
default Common Device Memory Map (CDMM) physical base address for the
Pistachio SoC. This allows the CDMM in each VPE to be configured and
probed for devices, such as the Fast Debug Channel (FDC).
The physical address chosen is just below the default CPC address, which
appears to also be unallocated.
The FDC IRQ is also usable on Pistachio, and is routed through the GIC,
so implement the get_c0_fdc_int() platform callback using
gic_get_c0_fdc_int(), so the FDC driver doesn't have to fall back to
polling.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: linux-mips@linux-mips.org
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Patchwork: http://patchwork.linux-mips.org/patch/9749/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Wider testing reveals that the Fast Debug Channel (FDC) interrupt is
routed through the GIC just fine on Pistachio SoC, even though it
contains interAptiv cores. Clearly the FDC interrupt routing problems
previously observed on interAptiv and proAptiv cores are specific to the
Malta FPGA bitstreams.
Move the workaround for interAptiv and proAptiv out of
gic_get_c0_fdc_int() in the GIC irqchip driver into Malta's
get_c0_fdc_int() platform callback, to allow the Pistachio SoC to use
the FDC interrupt.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Patchwork: http://patchwork.linux-mips.org/patch/9748/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MT_SMP is not the only SMP option for MT cores. The MT_SMP option
allows more than one VPE per core to appear as a secondary CPU in the
system. Because of how CM works, it propagates the address-based
cache ops to the secondary cores but not the index-based ones.
Because of that, the code does not use IPIs to flush the L1 caches on
secondary cores because the CM would have done that already. However,
the CM functionality is independent of the type of SMP kernel so even in
non-MT kernels, IPIs are not necessary. As a result of which, we change
the conditional to depend on the CM presence. Moreover, since VPEs on
the same core share the same L1 caches, there is no need to send an
IPI on all of them so we calculate a suitable cpumask with only one
VPE per core.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # 3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10654/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Mikulas reported his K6-3 not booting. This is because the
static_key API confusion struck and bit Andy, this wants to be
static_key_false().
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Vince Weaver <vince@deater.net>
Cc: hillf.zj <hillf.zj@alibaba-inc.com>
Fixes: a66734297f ("perf/x86: Add /sys/devices/cpu/rdpmc=2 to allow rdpmc for all tasks")
Link: http://lkml.kernel.org/r/20150709172338.GC19282@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
except for a GPMC fix to not use names for probing devices. Also a
one liner clean-up to remove unecessary return from a void function.
The summary for the changes being:
- Fix probe for GPMC devices by reoving limitations based on device
name
- Remove unnecessary return from a void function
- Revert beaglebone RTC sleep fix, we now have a better fix merged
- Add am4372 EMIF node to fix a warning
- Add am57xx-beagle-x15 power supply to fix USB2 if USB1 is disabled
- Disable rfbi for am4372 as it does not have a driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uoa8
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.2/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Merge "omap fixes against v4.2-rc1" from Tony Lindgren:
Minor fixes for omaps against v4.2-rc1. Mostly just minor dts changes
except for a GPMC fix to not use names for probing devices. Also a
one liner clean-up to remove unecessary return from a void function.
The summary for the changes being:
- Fix probe for GPMC devices by reoving limitations based on device
name
- Remove unnecessary return from a void function
- Revert beaglebone RTC sleep fix, we now have a better fix merged
- Add am4372 EMIF node to fix a warning
- Add am57xx-beagle-x15 power supply to fix USB2 if USB1 is disabled
- Disable rfbi for am4372 as it does not have a driver
* tag 'omap-for-v4.2/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am4372.dtsi: disable rfbi
ARM: dts: am57xx-beagle-x15: Provide supply for usb2_phy2
ARM: dts: am4372: Add emif node
Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep"
ARM: OMAP2+: Remove unnessary return statement from the void function, omap2_show_dma_caps
memory: omap-gpmc: Fix parsing of devices
A bunch of defconfig changes, and some patches to make the Allwinner H3 and
A33 boot properly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=m0CY
-----END PGP SIGNATURE-----
Merge tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Merge "Allwinner late changes for 4.2" from Maxime Ripard:
Allwinner late changes for 4.2
A bunch of defconfig changes, and some patches to make the Allwinner H3 and
A33 boot properly.
* tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Enable simplefb in the defconfig
ARM: Remove deprecated symbol from defconfig files
ARM: sunxi: Add Machine support for A33
ARM: sunxi: Introduce Allwinner H3 support
Documentation: sunxi: Update Allwinner SoC documentation
The IRQCHIP_DECLARE macro migrated to 'include/linux/irqchip.h'.
See commit 91e20b5040
("irqchip: Move IRQCHIP_DECLARE macro to include/linux/irqchip.h").
This patch removes the inclusions of private header 'drivers/irqchip/irqchip.h'
and if necessary replaces them with inclusions of 'include/linux/irqchip.h'.
Signed-off-by: Joel Porquet <joel@porquet.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
ARCompact/ARCv2 ISA provide that any instructions which deals with
bitpos/count operand ASL, LSL, BSET, BCLR, BMSK .... will only consider
lower 5 bits. i.e. auto-clamp the pos to 0-31.
ARC Linux bitops exploited this fact by NOT explicitly masking out upper
bits for @nr operand in general, saving a bunch of AND/BMSK instructions
in generated code around bitops.
While this micro-optimization has worked well over years it is NOT safe
as shifting a number with a value, greater than native size is
"undefined" per "C" spec.
So as it turns outm EZChip ran into this eventually, in their massive
muti-core SMP build with 64 cpus. There was a test_bit() inside a loop
from 63 to 0 and gcc was weirdly optimizing away the first iteration
(so it was really adhering to standard by implementing undefined behaviour
vs. removing all the iterations which were phony i.e. (1 << [63..32])
| for i = 63 to 0
| X = ( 1 << i )
| if X == 0
| continue
So fix the code to do the explicit masking at the expense of generating
additional instructions. Fortunately, this can be mitigated to a large
extent as gcc has SHIFT_COUNT_TRUNCATED which allows combiner to fold
masking into shift operation itself. It is currently not enabled in ARC
gcc backend, but could be done after a bit of testing.
Fixes STAR 9000866918 ("unsafe "undefined behavior" code in kernel")
Reported-by: Noam Camus <noamc@ezchip.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
With up-to-date FPGA builds ARC cores are supposed to correctly operate
even with 90 MHz clock (which is a target frequency for AXS103 release).
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-linux-dev@synopsys.com
Replace lw/sw and various arithmetic instructions with macros so the
code can work on 64-bit kernels as well.
Cc: <stable@vger.kernel.org> # 3.16+
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10591/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In preparation for 64-bit CPS support, we replace KSEG0 with CKSEG0
so 64-bit kernels can be supported.
Cc: <stable@vger.kernel.org> # 3.16+
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10590/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This
breaks the build on 64-bit. As a result of which, use the pseudo-registers
ta0-ta3 to make the code compatible with 64-bit.
Cc: <stable@vger.kernel.org> # 3.16+
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10589/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
mips32r2 is a subset of mips64r2, so we replace mips32r2 with mips64r2
in preparation for 64-bit CPS support.
Cc: <stable@vger.kernel.org> # 3.16+
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10588/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The PTR_LA macro will pick the correct "la" or "dla" macro to
load an address to a register. This gets rids of the following
warnings (and others) when building a 64-bit CPS kernel:
arch/mips/kernel/cps-vec.S:63: Warning: la used to load 64-bit address
arch/mips/kernel/cps-vec.S:159: Warning: la used to load 64-bit address
arch/mips/kernel/cps-vec.S:220: Warning: la used to load 64-bit address
arch/mips/kernel/cps-vec.S:240: Warning: la used to load 64-bit address
[...]
Cc: <stable@vger.kernel.org> # 3.16+
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10587/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 1d8f1f5a78 ("MIPS: smp-cps: hotplug support") added hotplug
support in the SMP/CPS implementation but it introduced a few build problems
on 64-bit kernels due to pointer being casted to and from 'int' C types. We
fix this problem by using 'unsigned long' instead which should match the size
of the pointers in 32/64-bit kernels. Finally, we fix the comment since the
CM base address is loaded to v1($3) instead of v0.
Fixes the following build problems:
arch/mips/kernel/smp-cps.c: In function 'wait_for_sibling_halt':
arch/mips/kernel/smp-cps.c:366:17: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
[...]
arch/mips/kernel/smp-cps.c: In function 'cps_cpu_die':
arch/mips/kernel/smp-cps.c:427:13: error: cast to pointer
from integer of different size [-Werror=int-to-pointer-cast]
cc1: all warnings being treated as errors
Fixes: 1d8f1f5a78 ("MIPS: smp-cps: hotplug support")
Cc: <stable@vger.kernel.org> # 3.16+
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10586/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 5f9f41c474 ("MIPS: kernel: Prepare
the JR instruction for emulation on MIPS R6") added support for
emulating the JR instruction on MIPS R6 cores but that introduced a bug
which could be triggered when hitting a JALR opcode because the code used
the wrong field in the 'r_format' struct to determine the instruction
opcode. This lead to crashes because an emulated JALR instruction was
treated as a JR one when the R6 emulator was turned off.
Fixes: 5f9f41c474 ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6")
Cc: <stable@vger.kernel.org> # 4.0+
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10583/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commits f1b44067c1 ("MIPS: Emulate the
new MIPS R6 B{L,G}T{Z,}{AL,}C instructions") and commit
a8ff66f52d ("MIPS: Emulate the new MIPS
R6 B{L,G}E{Z,}{AL,}C instructions") added support for emulating various
branch compact instructions. However, it missed the case for those which
use the old BLEZL and BGTZL opcodes leading to random crashes when the R6
emulator is disabled. We fix this by ensuring that the 'rt' field is not
zero which is always true for these branch compact instructions.
Fixes: f1b44067c1 ("MIPS: Emulate the new MIPS R6 B{L,G}T{Z,}{AL,}C instructions")
Fixes: a8ff66f52d ("MIPS: Emulate the new MIPS R6 B{L,G}E{Z,}{AL,}C instructions")
Cc: <stable@vger.kernel.org> # 4.0+
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/10582/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit f9a7febd leads to a fact that mapstart and therefore a page bitmap for
bootmem allocator immediately follows initrd_end. This doesn't always work
well on Octeon, where there are holes in PFN ranges (refer to 5b3b1688 and
4MB-aligned PFN allocation). Depending on the inird location it could happen,
that mapstart would be in an area not allocated by plat_mem_setup() in
arch/mips/cavium-octeon/setup.c, but in the alignment hole between initrd and
the next PFN area. Later on this memory will be unconditionally made available
to buddy allocator at the end of free_all_bootmem_core() (mm/bootmem.c).
All of this results in Linux using the memory not designated for Linux in
Octeon's plat_mem_setup(), which in turn means corruption of the memory used
by another OS/baremetal code on the same SoC.
It doesn't look to me as a problem of Octeon platform code, but rather as an
inability of f9a7febd to deal correctly with the fragmented memory-mappings.
Proposed fix moves the check for initrd address to the same calculation-loop
in bootmem_init() (arch/mips/kernel/setup.c), which also accounts for kernel
code location. This should result in mapstart located starting from the first
PFN area after kernel code AND initrd.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: linux-mips@linux-mips.org
Cc: David Daney <david.daney@cavium.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
Cc: Joe Perches <joe@perches.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Yusuf Khan <yusuf.khan@nokia.com>
Cc: Michael Kreuzer <michael.kreuzer@nokia.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Patchwork: https://patchwork.linux-mips.org/patch/10594/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull arch/tile fix from Chris Metcalf:
"This fix eliminates a "section mismatch" warning caused by the new
__ex_table checking code in modpost"
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
modpost: work correctly with tile coldtext sections
The tilegx and tilepro compilers use .coldtext for their unlikely
executed text section name, so an __attribute__((cold)) function
will (when compiled with higher optimization levels) land in
the .coldtext section.
Modify modpost to add .coldtext to the set of OTHER_TEXT_SECTIONS
so we don't get warnings about referencing such a section in an
__ex_table block, and then also modify arch/tile/lib/memcpy_user_64.c
so that it uses plain ".coldtext" instead of ".coldtext.memcpy".
The latter naming is a relic of an earlier use of -ffunction-sections,
which we no longer use by default.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Add a DTS file for the MP2 Cortex-A53 Soft Macrocell Model implemented
on a LogicTile Express 20MG (V2F-1XV7) daughterboard. This is based on
the version that's currently available from the ARM DTS repository [1].
[1] git://linux-arm.org/arm-dts.git
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
The CCI device node was added to vexpress CA15_A7(i.e. TC2) much before
the CCI PMU support and binding was added. This patch adds the missing
PMU node so that CCI PMUs can be used on TC2.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
The dts for the CoreTile Express A15x2 A7x3 (TC2) only describes the
PMUs of the Cortex-A15 CPUs, and not the Cortex-A7 CPUs.
Now that we have a mechanism for describing disparate PMUs and their
interrupts in device tree, this patch makes use of these to describe the
PMUs for all CPUs in the system. For consistency, the existing A15 PMU
interrupt-affinity property is reflowed across two lines.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
The PCIe host controller uses MSIs provided by GICv3 ITS. Enable it on
Thunder SoCs by adding an entry to DT.
Signed-off-by: Tirumalesh Chalamarla <tchalamarla@cavium.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
this moves to general APIs, and all drivers will be changed based
on it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Beg0
-----END PGP SIGNATURE-----
Merge tag 'sirf-iobrg2regmap-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into fixes
Merge "CSR SiRFSoC rtc iobrg move to regmap for 4.2" from Barry Song:
move CSR rtc iobrg read/write API to be regmap
this moves to general APIs, and all drivers will be changed based
on it.
* tag 'sirf-iobrg2regmap-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux:
ARM: prima2: move to use REGMAP APIs for rtciobrg
This patch adds poweroff button device node to support poweroff feature
on APM X-Gene Mustang platform.
Signed-off-by: Y Vo <yvo@apm.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Currently we enable debug exceptions before reading ESR_EL1 in both
el0_inv and el1_inv. If a debug exception is taken before we read
ESR_EL1, the value will have been corrupted.
As el*_inv is typically fatal, an intervening debug exception results in
misleading debug information being logged to the console, but is not
otherwise harmful.
As with the other entry paths, we can use the ESR_EL1 value stashed
earlier in the exception entry (in x25 for el0_sync{,_compat}, and x1
for el1_sync), giving us better error reporting in this case.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If CONFIG_PM is not set the PU power domain needs to be enabled always,
otherwise there are two failure scenarios which will hang the system if
one of the devices in the PU domain is accessed.
1. New DTs (4.1+) drop the "always-on" property from the PU regulator, so
if it isn't properly enabled by the GPC code it will be disabled at the
end of boot.
2. If the bootloader already disabled the PU domain the GPC explicitly
needs to enable it again, even if the kernel doesn't do any power
management. This is a bit hypothetical, as it requires to boot a
mainline kernel on a downstream bootloader, as no mainline bootloader
disables the PM domains.
Cc: <stable@vger.kernel.org> # 4.1
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
In order to get iio-hwmon support, the lradc must be declared as an
iio provider. So fix this issue by adding the #io-channel-cells property.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: bd798f9c7b ("ARM: dts: mxs: Add iio-hwmon to mx23 soc")
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
include/soc/imx/timer.h describes well the different versions of
the GPT block among the imx family:
enum imx_gpt_type {
GPT_TYPE_IMX1, /* i.MX1 */
GPT_TYPE_IMX21, /* i.MX21/27 */
GPT_TYPE_IMX31, /* i.MX31/35/25/37/51/6Q */
GPT_TYPE_IMX6DL, /* i.MX6DL/SX/SL */
};
So the proper compatible string for the MX27 case should be
"fsl,imx21-gpt".
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Commit 46e12c07b3 (MIPS: O32 / 32-bit:
Always copy 4 stack arguments.) change the O32 syscall handler to always
load four arguments from the userspace stack even for syscalls that
require fewer or no arguments to be copied. This removes a large table
from kernel space and need to maintain it. It appeared that it was ok
the implementation chosen requires 16 bytes of readable stack space
above the user stack pointer.
Turned out a few threading implementations munmap the user stack before
the thread exits resulting in errors due to the unreadable stack.
We now treat any failed load as a if the loaded value was zero and let
the actual syscall deal with the situation.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull ARM updates from Russell King:
"These are late by a week; they should have been merged during the
merge window, but unfortunately, the ARM kernel build/boot farms were
indicating random failures, and it wasn't clear whether the cause was
something in these changes or something during the merge window.
This is a set of merge window fixes with some documentation additions"
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: avoid unwanted GCC memset()/memcpy() optimisations for IO variants
ARM: pgtable: document mapping types
ARM: io: convert ioremap*() to functions
ARM: io: fix ioremap_wt() implementation
ARM: io: document ARM specific behaviour of ioremap*() implementations
ARM: fix lockdep unannotated irqs-off warning
ARM: 8397/1: fix vdsomunge not to depend on glibc specific error.h
ARM: add helpful message when truncating physical memory
ARM: add help text for HIGHPTE configuration entry
ARM: fix DEBUG_SET_MODULE_RONX build dependencies
ARM: 8396/1: use phys_addr_t in pfn_to_kaddr()
ARM: 8394/1: update memblock limit after mapping lowmem
ARM: 8393/1: smp: Fix suspicious RCU usage with ipi tracepoints
CC arch/mips/loongson64/lemote-2f/clock.o
/home/ralf/src/linux/linux-mips/arch/mips/loongson64/lemote-2f/clock.c:18:40: fatal error: asm/mach-loongson/loongson.h: No such file or directory
#include <asm/mach-loongson/loongson.h>
^
compilation terminated.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch reorders the nodes alphabetically
Signed-off-by: Walter Lozano <walter@vanguardiasur.com.ar>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
For those parts of the arm64 ACPI code that need to check GICC subtables
in the MADT, use the new BAD_MADT_GICC_ENTRY macro instead of the previous
BAD_MADT_ENTRY. The new macro takes into account differences in the size
of the GICC subtable that the old macro did not; this caused failures even
though the subtable entries are valid.
Fixes: aeb823bbac ("ACPICA: ACPI 6.0: Add changes for FADT table.")
Signed-off-by: Al Stone <al.stone@linaro.org>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The BAD_MADT_ENTRY() macro is designed to work for all of the subtables
of the MADT. In the ACPI 5.1 version of the spec, the struct for the
GICC subtable (struct acpi_madt_generic_interrupt) is 76 bytes long; in
ACPI 6.0, the struct is 80 bytes long. But, there is only one definition
in ACPICA for this struct -- and that is the 6.0 version. Hence, when
BAD_MADT_ENTRY() compares the struct size to the length in the GICC
subtable, it fails if 5.1 structs are in use, and there are systems in
the wild that have them.
This patch adds the BAD_MADT_GICC_ENTRY() that checks the GICC subtable
only, accounting for the difference in specification versions that are
possible. The BAD_MADT_ENTRY() will continue to work as is for all other
MADT subtables.
This code is being added to an arm64 header file since that is currently
the only architecture using the GICC subtable of the MADT. As a GIC is
specific to ARM, it is also unlikely the subtable will be used elsewhere.
Fixes: aeb823bbac ("ACPICA: ACPI 6.0: Add changes for FADT table.")
Signed-off-by: Al Stone <al.stone@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
[catalin.marinas@arm.com: extra brackets around macro arguments]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch fixes the formating of DTS bindings for the adxl34x digital
accelerometer, and updates the compatible string after the deprecation
of "adxl345x" compatible string.
Signed-off-by: Walter Lozano <walter@vanguardiasur.com.ar>
Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
irq_data is protected by irq_desc->lock, so retrieving the irq chip
from irq_data outside the lock is racy vs. an concurrent update. Move
it into the lock held region.
While at it add a comment why the vector walk does not require
vector_lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: xiao jin <jin.xiao@intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Link: http://lkml.kernel.org/r/20150705171102.331320612@linutronix.de
It's unsafe to examine fields in the irq descriptor w/o holding the
descriptor lock. Add proper locking.
While at it add a comment why the vector check can run lock less
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: xiao jin <jin.xiao@intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Link: http://lkml.kernel.org/r/20150705171102.236544164@linutronix.de
Jin debugged a nasty cpu hotplug race which results in leaking a irq
vector on the newly hotplugged cpu.
cpu N cpu M
native_cpu_up device_shutdown
do_boot_cpu free_msi_irqs
start_secondary arch_teardown_msi_irqs
smp_callin default_teardown_msi_irqs
setup_vector_irq arch_teardown_msi_irq
__setup_vector_irq native_teardown_msi_irq
lock(vector_lock) destroy_irq
install vectors
unlock(vector_lock)
lock(vector_lock)
---> __clear_irq_vector
unlock(vector_lock)
lock(vector_lock)
set_cpu_online
unlock(vector_lock)
This leaves the irq vector(s) which are torn down on CPU M stale in
the vector array of CPU N, because CPU M does not see CPU N online
yet. There is a similar issue with concurrent newly setup interrupts.
The alloc/free protection of irq descriptors does not prevent the
above race, because it merily prevents interrupt descriptors from
going away or changing concurrently.
Prevent this by moving the call to setup_vector_irq() into the
vector_lock held region which protects set_cpu_online():
cpu N cpu M
native_cpu_up device_shutdown
do_boot_cpu free_msi_irqs
start_secondary arch_teardown_msi_irqs
smp_callin default_teardown_msi_irqs
lock(vector_lock) arch_teardown_msi_irq
setup_vector_irq()
__setup_vector_irq native_teardown_msi_irq
install vectors destroy_irq
set_cpu_online
unlock(vector_lock)
lock(vector_lock)
__clear_irq_vector
unlock(vector_lock)
So cpu M either sees the cpu N online before clearing the vector or
cpu N installs the vectors after cpu M has cleared it.
Reported-by: xiao jin <jin.xiao@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Link: http://lkml.kernel.org/r/20150705171102.141898931@linutronix.de
If the kernel is compiled with gcc 5.1 and the XZ compression option
the decompress_kernel function calls _sclp_print_early in 64-bit mode
while the content of the upper register half of %r6 is non-zero.
This causes a specification exception on the servc instruction in
_sclp_servc.
The _sclp_print_early function saves and restores the upper registers
halves but it fails to clear them for the 31-bit code of the mini sclp
driver.
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
core_idle_state is maintained for each core. It uses 0-7 bits to track
whether a thread in the core has entered fastsleep or winkle. 8th bit is
used as a lock bit.
The lock bit is set in these 2 scenarios-
- The thread is first in subcore to wakeup from sleep/winkle.
- If its the last thread in the core about to enter sleep/winkle
While the lock bit is set, if any other thread in the core wakes up, it
loops until the lock bit is cleared before proceeding in the wakeup
path. This helps prevent race conditions w.r.t fastsleep workaround and
prevents threads from switching to process context before core/subcore
resources are restored.
But, in the path to sleep/winkle entry, we currently don't check for
lock-bit. This exposes us to following race when running with subcore
on-
First thread in the subcorea Another thread in the same
waking up core entering sleep/winkle
lwarx r15,0,r14
ori r15,r15,PNV_CORE_IDLE_LOCK_BIT
stwcx. r15,0,r14
[Code to restore subcore state]
lwarx r15,0,r14
[clear thread bit]
stwcx. r15,0,r14
andi. r15,r15,PNV_CORE_IDLE_THREAD_BITS
stw r15,0(r14)
Here, after the thread entering sleep clears its thread bit in
core_idle_state, the value is overwritten by the thread waking up.
In such cases when the core enters fastsleep, code mistakes an idle
thread as running. Because of this, the first thread waking up from
fastsleep which is supposed to resync timebase skips it. So we can
end up having a core with stale timebase value.
This patch fixes the above race by looping on the lock bit even while
entering the idle states.
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Fixes: 7b54e9f213f76 'powernv/powerpc: Add winkle support for offline cpus'
Cc: stable@vger.kernel.org # 3.19+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The Ceva ahci controller is available on the Xilinx Zynq UltraScale+
MPSoC.
Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[catalin.marinas@arm.com: removed unnecessary defconfig changes]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Patch 63a4aea556 ("of: clean-up unnecessary libfdt include paths")
removed all explicit libfdt include paths, since those are no longer
necessary after the latest dtc upgrade. However, this one snuck in
during the same merge window. Remove it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When I enable early_printk on a kernel, I cut and paste the
console= input and add to earlyprintk parameter. But I notice
recently that ktest has not been detecting triple faults. The
way it detects it, is by seeing the kernel banner "Linux version
.." with a different kernel version pop up. Then I noticed that
early printk was no longer working on my console, which was why
ktest was not seeing it.
I bisected it down and it was added to 4.0 with this commit:
ea9e9d8029 ("Specify PCI based UART for earlyprintk")
because it converted the simple_strtoul() that converts the baud
number into a kstrtoul(). The problem with this is, I had as my
baud rate, 115200n8 (acceptable for console=ttyS0), but because
of the "n8", the kstrtoul() doesn't parse the baud rate and
returns an error, which sets the baud rate to the default 9600.
This explains the garbage on my screen.
Now, earlyprintk= kernel parameter does not say it accepts that
format. Thus, one answer would simply be me changing my kernel
parameters to remove the "n8" since it isn't parsed anyway. But
I wonder if other people run into this, and it seems strange
that the two consoles for serial accepts different input.
I could also extend this to have earlyprintk do something with
that "n8" or whatever it has and have it match the console
parsing (which, BTW, still uses simple_strtoul(), as I guess it
has to).
This patch just makes my old kernel parameter parsing work like
it use to.
Although, simple_strtoull() is considered obsolete, it is the
only standard string parsing function that parses a number that
is attached to text. Ironically, commit ea9e9d8029 also added
several calls to simple_strtoul()!
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stuart R. Anderson <stuart.r.anderson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150706101434.5f6a351b@gandalf.local.home
[ Cleaned it up a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As we alloc pages with GFP_KERNEL in init_espfix_ap() which is
called before we enable local irqs, so the lockdep sub-system
would (correctly) trigger a warning about the potentially
blocking API.
So we allocate them on the boot CPU side when the secondary CPU is
brought up by the boot CPU, and hand them over to the secondary
CPU.
And we use alloc_pages_node() with the secondary CPU's node, to
make sure the espfix stack is NUMA-local to the CPU that is
going to use it.
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Cc: <bp@alien8.de>
Cc: <luto@amacapital.net>
Cc: <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c97add2670e9abebb90095369f0cfc172373ac94.1435824469.git.zhugh.fnst@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a CPU index parameter to init_espfix_ap(), so that the
parameter could be propagated to the function for espfix
page allocation.
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Cc: <bp@alien8.de>
Cc: <luto@amacapital.net>
Cc: <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/cde3fcf1b3211f3f03feb1a995bce3fee850f0fc.1435824469.git.zhugh.fnst@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
KASAN_SHADOW_OFFSET is purely arch specific setting,
so it should be in arch's Kconfig file.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Alexander Popov <alpopov@ptsecurity.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1435828178-10975-7-git-send-email-a.ryabinin@samsung.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While populating zero shadow wrong bits in upper level page
tables used. __PAGE_KERNEL_RO that was used for pgd/pud/pmd has
_PAGE_BIT_GLOBAL set. Global bit is present only in the lowest
level of the page translation hierarchy (ptes), and it should be
zero in upper levels.
This bug seems doesn't cause any troubles on Intel cpus, while
on AMDs it cause kernel crash on boot.
Use _KERNPG_TABLE bits for pgds/puds/pmds to fix this.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: <stable@vger.kernel.org> # 4.0+
Cc: Alexander Popov <alpopov@ptsecurity.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1435828178-10975-5-git-send-email-a.ryabinin@samsung.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
load_cr3() doesn't cause tlb_flush if PGE enabled.
This may cause tons of false positive reports spamming the
kernel to death.
To fix this __flush_tlb_all() should be called explicitly
after CR3 changed.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: <stable@vger.kernel.org> # 4.0+
Cc: Alexander Popov <alpopov@ptsecurity.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1435828178-10975-4-git-send-email-a.ryabinin@samsung.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently KASAN shadow region page tables created without
respect of physical offset (phys_base). This causes kernel halt
when phys_base is not zero.
So let's initialize KASAN shadow region page tables in
kasan_early_init() using __pa_nodebug() which considers
phys_base.
This patch also separates x86_64_start_kernel() from KASAN low
level details by moving kasan_map_early_shadow(init_level4_pgt)
into kasan_early_init().
Remove the comment before clear_bss() which stopped bringing
much profit to the code readability. Otherwise describing all
the new order dependencies would be too verbose.
Signed-off-by: Alexander Popov <alpopov@ptsecurity.com>
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: <stable@vger.kernel.org> # 4.0+
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1435828178-10975-3-git-send-email-a.ryabinin@samsung.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently x86_64_start_kernel() has two KASAN related
function calls. The first call maps shadow to early_level4_pgt,
the second maps shadow to init_level4_pgt.
If we move clear_page(init_level4_pgt) earlier, we could hide
KASAN low level detail from generic x86_64 initialization code.
The next patch will do it.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: <stable@vger.kernel.org> # 4.0+
Cc: Alexander Popov <alpopov@ptsecurity.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1435828178-10975-2-git-send-email-a.ryabinin@samsung.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When DSS nodes were added to am4372.dtsi, the rfbi node was not marked
as disabled. This should have been done, as the rule of thumb is to
disable all DSS nodes that are not used, and especially rfbi, as we
don't have a driver for rfbi.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Without this USB2 breaks if USB1 is disabled or USB1
initializes after USB2 e.g. due to deferred probing.
Fixes: 5a0f93c657 ("ARM: dts: Add am57xx-beagle-x15")
Signed-off-by: Roger Quadros <rogerq@ti.com>
Cc: stable@vger.kernel.org (v3.19+)
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add node for TI AM4372 EMIF. Without this we get a warning with the
recent commit fabbe6df (ARM: OMAP: AM43xx hwmod: Add data for am43xx
emif hwmod).
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Tested-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This reverts commit 3d76be5b93.
The latest revision of Beaglebone Black does not support RTC-only mode.
To avoid potential hardware damage, RTC-only mode was disabled by
default by commit 7a6cb0abe1 ("ARM: dts: am335x-boneblack: disable
RTC-only sleep to avoid hardware damage").
Unfortunately, an incorrect fix had already been applied, which instead
of just disabling RTC-only mode, prevents the Beaglebone from powering
down at all.
Revert this patch to fix the power-off regression.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 0a196848ca ("perf: Fix arch_perf_out_copy_user default"),
changes copy_from_user_nmi() to return the number of
remaining bytes so that it behave like copy_from_user().
Unfortunately, when the range is outside of the process
memory, the return value is still the number of byte
copied, eg. 0, instead of the remaining bytes.
As all users of copy_from_user_nmi() were modified as
part of commit 0a196848ca, the function should be
fixed to return the total number of bytes if range is
not correct.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1435001923-30986-1-git-send-email-ydroneaud@opteya.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The conversion of opal events to a proper irqchip means that handlers
are called until the relevant opal event has been cleared by
processing it. Events that queue work should therefore use a threaded
handler to mask the event until processing is complete.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
An earlier commit referenced 'hose_list' in sysdev/ppc4xx_hsta_msi.c.
hose_list is defined in ppc-pci.h, which was not included in that
file. Include it, fixing the build for the akebono defconfig used
by the kbuild test robot.
Fixes: f2c800aace ("powerpc/ppc4xx_hsta_msi: Move MSI-related ops to pci_controller_ops")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If we take an alignment exception which we cannot fix, the oops
currently prints:
Unable to handle kernel paging request for unknown fault
Lets print something more useful:
Unable to handle kernel paging request for unaligned access at address 0xc0000000f77bba8f
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This means the 'M' flag will work properly when the kernel prints a backtrace.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If it takes longer than 12us to read the PIT counter lsb/msb,
then the error margin will never fall below 500ppm within 50ms,
and Fast TSC calibration will always fail.
This patch detects when that will happen and fails fast. Note
the failure message is not printed in that case because:
1. it will always happen on that class of hardware
2. the absence of the message is more informative than its
presence
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/556EB717.9070607@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
With this nsim standlone / OSCI have working irq affinity - AXS103 still
needs some work as IDU is not visible in intc hierarchy yet !
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
alloc_pages_exact() get gfp flags and handle zero'ing already
And while it, fix the case where ioremap fails: return rightaway.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
ARC kernels have historically been built with -O3, despite top level
Makefile defaulting to -O2. This was facilitated by implicitly ordering
of arch makefile include AFTER top level assigned -O2.
An upstream fix to top level a1c48bb160 ("Makefile: Fix unrecognized
cross-compiler command line options") changed the ordering, making ARC
-O3 defunct.
Fix that by NOT relying on any ordering whatsoever and use the proper
arch override facility now present in kbuild (ARCH_*FLAGS)
Depends-on: ("kbuild: Allow arch Makefiles to override {cpp,ld,c}flags")
Suggested-by: Michal Marek <mmarek@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
SLC maintenance ops need to be serialized by software as there is no
inherent buffering / quequing of aux commands. It can silently ignore a
new aux operation if previous one is still ongoing (SLC_CTRL_BUSY)
So gaurd the SLC op using a spin lock
The spin lock doesn't seem to be contended even in heavy workloads such
as iperf. On FPGA @ 75 MHz.
[1] Before this change:
============================================================
# iperf -c 10.42.0.1
------------------------------------------------------------
Client connecting to 10.42.0.1, TCP port 5001
TCP window size: 43.8 KByte (default)
------------------------------------------------------------
[ 3] local 10.42.0.110 port 38935 connected with 10.42.0.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 48.4 MBytes 40.6 Mbits/sec
============================================================
[2] After this change:
============================================================
# iperf -c 10.42.0.1
------------------------------------------------------------
Client connecting to 10.42.0.1, TCP port 5001
TCP window size: 43.8 KByte (default)
------------------------------------------------------------
[ 3] local 10.42.0.243 port 60248 connected with 10.42.0.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 47.5 MBytes 39.8 Mbits/sec
# iperf -c 10.42.0.1
------------------------------------------------------------
Client connecting to 10.42.0.1, TCP port 5001
TCP window size: 43.8 KByte (default)
------------------------------------------------------------
[ 3] local 10.42.0.243 port 60249 connected with 10.42.0.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 54.9 MBytes 46.0 Mbits/sec
============================================================
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-linux-dev@synopsys.com
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
