* Enable BD9571MWV regulator in ARM64 defconfig
This is to allow wider testing of the BD9571 PMIC which is
present on boards with Renesas R-Car Gen3 SoCs
-----BEGIN PGP SIGNATURE-----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=BkCA
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM64 Based SoC Defconfig Updates for v4.19
* Enable BD9571MWV regulator in ARM64 defconfig
This is to allow wider testing of the BD9571 PMIC which is
present on boards with Renesas R-Car Gen3 SoCs
* tag 'renesas-arm64-defconfig-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: Enable BD9571MWV regulator
Signed-off-by: Olof Johansson <olof@lixom.net>
for 4.19, please pull the following changes:
- Stefan enables the Raspberry Pi voltage sensor driver (HWMON) in the
arm64 defconfig file
- Ray enables the ARM SP805 watchdog driver in the arm64 defconfig file
-----BEGIN PGP SIGNATURE-----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=DLo+
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.19/defconfig-arm64' of https://github.com/Broadcom/stblinux into next/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig changes
for 4.19, please pull the following changes:
- Stefan enables the Raspberry Pi voltage sensor driver (HWMON) in the
arm64 defconfig file
- Ray enables the ARM SP805 watchdog driver in the arm64 defconfig file
* tag 'arm-soc/for-4.19/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG
arm64: defconfig: Enable RPi voltage sensor
Signed-off-by: Olof Johansson <olof@lixom.net>
The defconfig has drifted over time, as Kconfig entries have changed order
or default values. Several maintainers ended up running 'savedefconfig'
themselves which caused a cascade of conflicts. Let's do it once and
for all in our tree before -rc2 instead.
Signed-off-by: Olof Johansson <olof@lixom.net>
The patch enables the hwmon driver for the Raspberry Pi.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
The BD9571 PMIC is present on the Renesas Salvator-X(S) and R-Car
Starter Kit Premier/Pro development boards.
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Here are the main updates for SoC support (besides DT additions) for ARM
32- and 64-bit platforms. The branch also contains defconfig updates to
turn on drivers and options as needed on the various platforms.
The largest parts of the delta are from cleanups moving platform data
and board file setup of TI platforms to ti-sysc bus drivers. There are
also some sweeping changes of eeprom and nand setup on Davinci, i.MX
and other platforms.
Samsung is removing support for Exynos5440, which was an oddball SoC
that hasn't been seen much use in designs.
Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
Linus Walleij is also removing support for ux500 (Sony Ericsson)
U8540/9540 SoCs that never made it to significant mass production and
products.
-----BEGIN PGP SIGNATURE-----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=S5wc
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"Here are the main updates for SoC support (besides DT additions) for
ARM 32- and 64-bit platforms. The branch also contains defconfig
updates to turn on drivers and options as needed on the various
platforms.
The largest parts of the delta are from cleanups moving platform data
and board file setup of TI platforms to ti-sysc bus drivers. There are
also some sweeping changes of eeprom and nand setup on Davinci, i.MX
and other platforms.
Samsung is removing support for Exynos5440, which was an oddball SoC
that hasn't been seen much use in designs.
Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
Linus Walleij is also removing support for ux500 (Sony Ericsson)
U8540/9540 SoCs that never made it to significant mass production and
products"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
MAINTAINERS: add NXP linux team maillist as i.MX reviewer
ARM: stm32: Don't select DMA unconditionally on STM32MP157C
arm64: defconfig: Enable PCIe on msm8996 and db820c
ARM: pxa3xx: enable external wakeup pins
ARM: pxa: stargate2: use device properties for at24 eeprom
arm64: defconfig: Enable HISILICON_LPC
arm64: defconfig: enable drivers for Poplar support
arm64: defconfig: Enable UFS on msm8996
ARM: berlin: switch to SPDX license identifier
arm: berlin: remove non-necessary flush_cache_all()
ARM: berlin: extend BG2CD Kconfig entry
OMAP: CLK: CLKSRC: Add suspend resume hooks
ARM: AM43XX: Add functions to save/restore am43xx control registers
ASoC: ams_delta: use GPIO lookup table
ARM: OMAP1: ams-delta: add GPIO lookup tables
bus: ti-sysc: Fix optional clocks array access
ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
...
* Enable UFS and PCIe for Qualcomm msm8996/db820c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbCHdwAAoJEFKiBbHx2RXV/5sQAIx4JnUs2HfYYnK1ILooGk5h
D95ck/OUAtnAeNfMo6pm13MPd3rMCm5Sjp8qp6vvR4JnImRuIQzPD9MD7s1kgAHm
fPQrEcENfBtPBrYs8skoJQxBuAGcQHOZSyqrTwYJYCqKMm2UymtlpS1zw/N/nWc9
h9Nh2vKc9wgF5sGdDEhCMXMnSqgWTKnAvuJQXAl7FCN1r5AIsI5myMoh1weVPZG2
PseiT2w6KAP38kZkNh/OPx5SDjcRLSrLTlK6s2i5SycAaEstYbPr/3wfsyhR26pH
nhWZzYUDZw5fBhWOBIbKv1vRmBp7Qc312sOcpODoosA7SjQn12Yqt56AC88g5krG
ijJL81Q9OePLh6MAO2oIg04pUSB2TA64b/83VaTXPdWXLxkajaQhIq4Z/JJKGXws
toiv60QaifQW3jvmpSIP2vR68iUHxVchtSu4UvWLlIqKRfCEzq2d0R+cNrwVDM4x
saOfCNee7i3eIDyWkfRzfZNk3gMIGdsmEAxJ9flvtQscNIXGvxKasOLy7bi2iWQ4
G+AXS1hmSHkugeZwU8h2RjOlKkTO5yvWQm9vi60gB/So14RLajgF120Yn2rOF5IS
r+14YXEDHZkGm3FczIgT2drdtXfEmadbYpTROvifnj3WrTi7NJDBOTsf8kV85aa6
Zc/sU/BazzUqQat30BiX
=sPLc
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig
Qualcomm ARM64 Based defconfig Updates for v4.18
* Enable UFS and PCIe for Qualcomm msm8996/db820c
* tag 'qcom-arm64-defconfig-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: defconfig: Enable PCIe on msm8996 and db820c
arm64: defconfig: Enable UFS on msm8996
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable the support of ethernet, eMMC, Combo/INNO phy
and PCIe for Hi3798CV200
- Enable the LPC for hip06 and hip07
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=l2fi
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.18v3' of git://github.com/hisilicon/linux-hisi into next/defconfig
ARM64: hisilicon: defconfig updates for 4.18
- Enable the support of ethernet, eMMC, Combo/INNO phy
and PCIe for Hi3798CV200
- Enable the LPC for hip06 and hip07
* tag 'hisi-defconfig-for-4.18v3' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable HISILICON_LPC
arm64: defconfig: enable drivers for Poplar support
Signed-off-by: Olof Johansson <olof@lixom.net>
The msm8996 PCIe sits behind the "agnoc0", which is represented as a
simple-pm-bus, so enable support for this. Then enable the QMP phy
driver.
Also enable the atl1c ethernet driver and ath10k wlan driver to support
these components on the DragonBoard820c.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Now that the driver has been merged for the HiSilicon
LPC host, enable the relevant config.
Turning on this config will also enable config
INDIRECT_PIO, which would have not been enabled
previously - see config info for more details.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
It enables driver support of Ethernet, eMMC, Combo/INNO phy and PCIe
for Hi3798CV200 Poplar platform.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Adding thermal for Armada 7K/8K and SPI for Armada 3700
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWv7/MgAKCRALBhiOFHI7
1SyaAKCbxPDR48yWie2ZLxneKc/xZu/QwQCffSpKG1EARKRgk/rz5frnF1vwUuw=
=olHS
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.18-1' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu arm64 for 4.18 (part 1)
Adding thermal for Armada 7K/8K and SPI for Armada 3700
* tag 'mvebu-arm64-4.18-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable the Armada thermal driver
arm64: defconfig: enable CONFIG_SPI_ARMADA_3700
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable in ARM64 defconfig:
- Recently mainlined support for R-Car E3 (r8a77990) SoC
- HDMI sound and depdencies.
HDMI sound is used by R-Car Gen 3. These options are enabled as
modules to avoid unnecesesarily enlarging the kernel image.
-----BEGIN PGP SIGNATURE-----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=pmB3
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM64 Based SoC Defconfig Updates for v4.18
* Enable in ARM64 defconfig:
- Recently mainlined support for R-Car E3 (r8a77990) SoC
- HDMI sound and depdencies.
HDMI sound is used by R-Car Gen 3. These options are enabled as
modules to avoid unnecesesarily enlarging the kernel image.
* tag 'renesas-arm64-defconfig-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: enable R8A77990 SoC
arm64: defconfig: Enable CONFIG_SND_AUDIO_GRAPH_CARD
arm64: defconfig: makes SND_SIMPLE_CARD to module
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable GLINK RPM so that we get RPM regulators and clocks and enable the
UFS host controller driver and the Qualcomm UFS platform driver. The UFS
phy is selected by the Qualcomm UFS driver.
The simple ondemand devfreq governor must be builtin, as there's no
mechanism for automatically loading it, causing UFS HCD initialization
to fail.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch enables the Armada thermal driver to support thermal
management on Marvell EBU Armada SoCs (7K,8K).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Enable the Renesas R-Car E3 (R8A77990) SoC in the ARM64 defconfig.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
as well as general cros-ec, hid, touchscreen bluetooth and wifi-drivers
on 64bit arm platforms.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlr5d3UQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgV6yB/9Xckx6aeyzem9wP6qFBX5v3hGit9inN+F9
mCf/0HlWpMs1TvB5HIraXf63Z8xRlqD+X+SQjKOjzyXPbFtPW7Ib++rpZAjod/GZ
THyEPnniW0KnxOqPRG0AkZZLpxUxpC2895VI1E+o8DMA6Pxt5cVqaxEktXdMFoqW
3zsJSGMKa8Cyih+K/ZZGyQTmnxEd8o4nkZS7tjx3YSINVKKoFPKg2kLABTqHr5Ru
kZZ/hhfSkrn+j4l3aZ+gVDeHDpjy5sJZ4w5O+xxuTcnDPhGgRcTwI3Qr6x24Bzqi
HPFjZuf7Utxl4LYXqKebdpQLYC9v4k7GMZKfFm00ur8pE6Iwt7ja
=+n7b
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/defconfig
Enablement of Rockchip-specific efuse, io-domain and typec drivers
as well as general cros-ec, hid, touchscreen bluetooth and wifi-drivers
on 64bit arm platforms.
* tag 'v4.18-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: enable rockchip efuse
arm64: defconfig: Enable bluetooth USB support
arm64: defconfig: Enable Marvell WiFi-Ex PCIe driver
arm64: defconfig: Enable Atmel Maxtouch driver
arm64: defconfig: Enable HID over I2C drivers
arm64: defconfig: Enable ChromeOS EC drivers for supported Chromebooks.
arm64: defconfig: Enable Rockchip io-domain driver
arm64: defconfig: Enable typec-phy and extcon-usbc-cros-ec for rk3399
Signed-off-by: Olof Johansson <olof@lixom.net>
The VC4 needs more memory than the default setting (16 MB):
vc4-drm soc:gpu: swiotlb: coherent allocation failed, size=16777216
[drm:vc4_bo_create [vc4]] *ERROR* Failed to allocate from CMA:
vc4_v3d 3fc00000.v3d: Failed to allocate memory for tile binning: -12.
You may need to enable CMA or give it more memory.
vc4-drm soc:gpu: failed to bind 3fc00000.v3d (ops vc4_v3d_ops [vc4]): -12
vc4-drm soc:gpu: master bind failed: -12
vc4-drm: probe of soc:gpu failed with error -12
So increase the value to 32 MB and fix this issue.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Now Rockchip PCIe drivers could support both of RC mode and EP
mode, so we need to rename the config name. This patch updates
defconfig to reflect the fact that we want to build Rockchip PCIe
controller as RC mode, into a module as before.
Cc: linux-arm-kernel@lists.infradead.org
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The efuses on Rockchip socs often contain informations
about specifics of the chip its running on (leakage currents etc)
which components might want to read to adjust settings accordingly.
So enable the efuse early for that.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
CONFIG_SND_AUDIO_GRAPH_CARD is needed to use HDMI sound with video
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Recently kernelCI reported the board mt7622-rfb1 has a fail test with
kernel: ERROR: did not start booting whose details could be seen at [1].
The cause is that UART0 can't output anything when it's missing a proper
pin setup with current DTS, so the essential driver is always getting
enabled to fix up the issue.
[1] https://kernelci.org/boot/id/5ad7d62759b51461bfb1f829/
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: stable@vger.kernel.org
Fixes: ae457b7679 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable the Bluetooth USB controller which is present
in the RK3399 Kevin Chromebook.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the wireless network driver to support the WiFi adapter
present in RK3399 Kevin Chromebooks. Note that this also
enables Bluetooth via USB.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the Atmel Maxtouch driver to support the touchscreen
and touchpad present in RK3399 Kevin Chromebooks.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the HID-I2C driver to support the stylus
present in RK3399 Kevin Chromebooks.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Heiko Stübner justified pretty well the change in commit e330eb86ba
("ARM: multi_v7_defconfig: enable Rockchip io-domain driver"). This
change is also needed for arm64 rockchip boards, so, do the same for arm64.
The io-domain driver is necessary to notify the soc about voltages
changes happening on supplying regulators. Probably the most important
user right now is the mmc tuning code, where the soc needs to get
notified when the voltage is dropped to the 1.8V point.
As this option is necessary to successfully tune UHS cards etc, it
should get built in. Otherwise, tuning will fail with,
dwmmc_rockchip fe320000.dwmmc: All phases bad!
mmc0: tuning execution failed: -5
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enables typec phyter and extcon driver for cable detection that is used by
USB 3.0 controller for Rockchip rk3399 SoCs.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and
a Cypress CYW43455 (connect via UART). This patch enables the necessary
drivers.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Enable the following to allow them to be more widely exercised:
* Newly added R8A77965 and R8A77980 SoCs
* PWM and USB as used on R-Car Gen3 SoCs
-----BEGIN PGP SIGNATURE-----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=heZq
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM64 Based SoC Defconfig Updates for v4.17" from Simon Horman:
Enable the following to allow them to be more widely exercised:
* Newly added R8A77965 and R8A77980 SoCs
* PWM and USB as used on R-Car Gen3 SoCs
* tag 'renesas-arm64-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: enable R8A77965 SoC
arm64: defconfig: Enable PWM and USB for R-Car
arm64: defconfig: enable R8A77980 SoC
Enable the BPMP thermal and CPU frequency drivers as well as make sure
that the Tegra SMMU is enabled by default because there's no fun without
it. Also enable initial Tegra194 support.
-----BEGIN PGP SIGNATURE-----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=Lnk+
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.17-arm64-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
Pull "arm64: Default configuration updates for v4.17-rc1" from Thierry Reding:
Enable the BPMP thermal and CPU frequency drivers as well as make sure
that the Tegra SMMU is enabled by default because there's no fun without
it. Also enable initial Tegra194 support.
* tag 'tegra-for-4.17-arm64-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable the Tegra SMMU by default
arm64: defconfig: Enable CONFIG_TEGRA_BPMP_THERMAL
arm64: defconfig: Enable CONFIG_ARM_TEGRA186_CPUFREQ
arm64: defconfig: Enable NVIDIA Tegra194 support
This patch enables the CONFIG_STMMAC_ETH to the default arm64 defconfig:
-CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_ETH=y
+CONFIG_DWMAC_IPQ806X=m
+CONFIG_DWMAC_MESON=m
+CONFIG_DWMAC_ROCKCHIP=m
+CONFIG_DWMAC_SUNXI=m
+CONFIG_DWMAC_SUN8I=m
The STMMAC ethernet controller is on the Stratix10 platform, and thus needs
driver to be in the kernel image for NFS to work.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Display and graphics can't work together without an SMMU, so it is
effectively always getting enabled anyway.
Signed-off-by: Thierry Reding <treding@nvidia.com>
- Enable deadline IO scheduler to improve the performnace for some
usecaese without changing the default IO scheduler
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BscW
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.17' of git://github.com/hisilicon/linux-hisi into next/soc
Pull "ARM64: hisilicon: defconfig updates for 4.17" from Wei Xu:
- Enable deadline IO scheduler to improve the performnace for some
usecaese without changing the default IO scheduler
* tag 'hisi-defconfig-for-4.17' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: enable IOSCHED_DEADLINE
Enable Tegra BPMP thermal sensor support by default, built as a module.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable Tegra186 CPU frequency scaling support by default.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the various CPUFREQ governors and statistics to ease development.
Don't change the default governor - performance governor.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable the driver for the TSENS IP that is present across several QCOM
SoCs.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The APCS block is present on several Qualcomm SoCs e.g. 8916, 8996. On the
8916 it is needed to enable the clock controller that in turn enables
cpufreq on the platform while on the 8996 it is needed for communication
with RPM.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
