commit c646d10dda2dcde82c6ce5a474522621ab2b8b19 upstream.
After the blamed patch, all RX traffic gets hashed to CPU 0 because the
hashing indirection table set up in:
enetc_pf_probe
-> enetc_alloc_si_resources
-> enetc_configure_si
-> enetc_setup_default_rss_table
is overwritten later in:
enetc_pf_probe
-> enetc_init_port_rss_memory
which zero-initializes the entire port RSS table in order to avoid ECC errors.
The trouble really is that enetc_init_port_rss_memory really neads
enetc_alloc_si_resources to be called, because it depends upon
enetc_alloc_cbdr and enetc_setup_cbdr. But that whole enetc_configure_si
thing could have been better thought out, it has nothing to do in a
function called "alloc_si_resources", especially since its counterpart,
"free_si_resources", does nothing to unwind the configuration of the SI.
The point is, we need to pull out enetc_configure_si out of
enetc_alloc_resources, and move it after enetc_init_port_rss_memory.
This allows us to set up the default RSS indirection table after
initializing the memory.
Fixes: 07bf34a50e32 ("net: enetc: initialize the RFS and RSS memories")
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c91bc3d44dfef8284af384877fbe61117e8b7d1 upstream.
According to the SH7710, SH7712, SH7713 Group User's Manual: Hardware,
Rev. 3.00, the TRSCER register actually has only bit 7 valid (and named
differently), with all the other bits reserved. Apparently, this was not
the case with some early revisions of the manual as we have the other
bits declared (and set) in the original driver. Follow the suit and add
the explicit sh_eth_cpu_data::trscer_err_mask initializer for SH771x...
Fixes: 86a74ff21a ("net: sh_eth: add support for Renesas SuperH Ethernet")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9eb8bc593a5eed167dac2029abef343854c5ba75 upstream.
Commit 86dd9868b878 has several issues, but was accepted too soon
before anyone could take a look.
- Double free. dsa_slave_xmit() will free the skb if the xmit function
returns NULL, but the skb is already freed by eth_skb_pad(). Use
__skb_put_padto() to avoid that.
- Unnecessary allocation. It has been done by DSA core since commit
a3b0b6479700.
- A u16 pointer points to skb data. It should be __be16 for network
byte order.
- Typo in comments. "numer" -> "number".
Fixes: 86dd9868b878 ("net: dsa: tag_rtl4_a: Support also egress tags")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbbe7c962c3a8163bf724dbc3c9fdfc9b16d3117 upstream.
Leave it to Greg.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b1ea29bc0d7b94d420f96a0f4121403efc3dd85 upstream.
This reverts commit 8ff60eb052eeba95cfb3efe16b08c9199f8121cf.
The kernel test robot reports a huge performance regression due to the
commit, and the reason seems fairly straightforward: when there is
contention on the page list (which is what causes acquire_slab() to
fail), we do _not_ want to just loop and try again, because that will
transfer the contention to the 'n->list_lock' spinlock we hold, and
just make things even worse.
This is admittedly likely a problem only on big machines - the kernel
test robot report comes from a 96-thread dual socket Intel Xeon Gold
6252 setup, but the regression there really is quite noticeable:
-47.9% regression of stress-ng.rawpkt.ops_per_sec
and the commit that was marked as being fixed (7ced371971: "slub:
Acquire_slab() avoid loop") actually did the loop exit early very
intentionally (the hint being that "avoid loop" part of that commit
message), exactly to avoid this issue.
The correct thing to do may be to pick some kind of reasonable middle
ground: instead of breaking out of the loop on the very first sign of
contention, or trying over and over and over again, the right thing may
be to re-try _once_, and then give up on the second failure (or pick
your favorite value for "once"..).
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/20210301080404.GF12822@xsang-OptiPlex-9020/
Cc: Jann Horn <jannh@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14302ee3301b3a77b331cc14efb95bf7184c73cc upstream.
In cifs_statfs(), if server->ops->queryfs is not NULL, then we should
use its return value rather than always returning 0. Instead, use rc
variable as it is properly set to 0 in case there is no
server->ops->queryfs.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee2e3f50629f17b0752b55b2566c15ce8dafb557 upstream.
Creating a series of detached mounts, attaching them to the filesystem,
and unmounting them can be used to trigger an integer overflow in
ns->mounts causing the kernel to block any new mounts in count_mounts()
and returning ENOSPC because it falsely assumes that the maximum number
of mounts in the mount namespace has been reached, i.e. it thinks it
can't fit the new mounts into the mount namespace anymore.
Depending on the number of mounts in your system, this can be reproduced
on any kernel that supportes open_tree() and move_mount() by compiling
and running the following program:
/* SPDX-License-Identifier: LGPL-2.1+ */
#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <getopt.h>
#include <limits.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <unistd.h>
/* open_tree() */
#ifndef OPEN_TREE_CLONE
#define OPEN_TREE_CLONE 1
#endif
#ifndef OPEN_TREE_CLOEXEC
#define OPEN_TREE_CLOEXEC O_CLOEXEC
#endif
#ifndef __NR_open_tree
#if defined __alpha__
#define __NR_open_tree 538
#elif defined _MIPS_SIM
#if _MIPS_SIM == _MIPS_SIM_ABI32 /* o32 */
#define __NR_open_tree 4428
#endif
#if _MIPS_SIM == _MIPS_SIM_NABI32 /* n32 */
#define __NR_open_tree 6428
#endif
#if _MIPS_SIM == _MIPS_SIM_ABI64 /* n64 */
#define __NR_open_tree 5428
#endif
#elif defined __ia64__
#define __NR_open_tree (428 + 1024)
#else
#define __NR_open_tree 428
#endif
#endif
/* move_mount() */
#ifndef MOVE_MOUNT_F_EMPTY_PATH
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 /* Empty from path permitted */
#endif
#ifndef __NR_move_mount
#if defined __alpha__
#define __NR_move_mount 539
#elif defined _MIPS_SIM
#if _MIPS_SIM == _MIPS_SIM_ABI32 /* o32 */
#define __NR_move_mount 4429
#endif
#if _MIPS_SIM == _MIPS_SIM_NABI32 /* n32 */
#define __NR_move_mount 6429
#endif
#if _MIPS_SIM == _MIPS_SIM_ABI64 /* n64 */
#define __NR_move_mount 5429
#endif
#elif defined __ia64__
#define __NR_move_mount (428 + 1024)
#else
#define __NR_move_mount 429
#endif
#endif
static inline int sys_open_tree(int dfd, const char *filename, unsigned int flags)
{
return syscall(__NR_open_tree, dfd, filename, flags);
}
static inline int sys_move_mount(int from_dfd, const char *from_pathname, int to_dfd,
const char *to_pathname, unsigned int flags)
{
return syscall(__NR_move_mount, from_dfd, from_pathname, to_dfd, to_pathname, flags);
}
static bool is_shared_mountpoint(const char *path)
{
bool shared = false;
FILE *f = NULL;
char *line = NULL;
int i;
size_t len = 0;
f = fopen("/proc/self/mountinfo", "re");
if (!f)
return 0;
while (getline(&line, &len, f) > 0) {
char *slider1, *slider2;
for (slider1 = line, i = 0; slider1 && i < 4; i++)
slider1 = strchr(slider1 + 1, ' ');
if (!slider1)
continue;
slider2 = strchr(slider1 + 1, ' ');
if (!slider2)
continue;
*slider2 = '\0';
if (strcmp(slider1 + 1, path) == 0) {
/* This is the path. Is it shared? */
slider1 = strchr(slider2 + 1, ' ');
if (slider1 && strstr(slider1, "shared:")) {
shared = true;
break;
}
}
}
fclose(f);
free(line);
return shared;
}
static void usage(void)
{
const char *text = "mount-new [--recursive] <base-dir>\n";
fprintf(stderr, "%s", text);
_exit(EXIT_SUCCESS);
}
#define exit_usage(format, ...) \
({ \
fprintf(stderr, format "\n", ##__VA_ARGS__); \
usage(); \
})
#define exit_log(format, ...) \
({ \
fprintf(stderr, format "\n", ##__VA_ARGS__); \
exit(EXIT_FAILURE); \
})
static const struct option longopts[] = {
{"help", no_argument, 0, 'a'},
{ NULL, no_argument, 0, 0 },
};
int main(int argc, char *argv[])
{
int exit_code = EXIT_SUCCESS, index = 0;
int dfd, fd_tree, new_argc, ret;
char *base_dir;
char *const *new_argv;
char target[PATH_MAX];
while ((ret = getopt_long_only(argc, argv, "", longopts, &index)) != -1) {
switch (ret) {
case 'a':
/* fallthrough */
default:
usage();
}
}
new_argv = &argv[optind];
new_argc = argc - optind;
if (new_argc < 1)
exit_usage("Missing base directory\n");
base_dir = new_argv[0];
if (*base_dir != '/')
exit_log("Please specify an absolute path");
/* Ensure that target is a shared mountpoint. */
if (!is_shared_mountpoint(base_dir))
exit_log("Please ensure that \"%s\" is a shared mountpoint", base_dir);
dfd = open(base_dir, O_RDONLY | O_DIRECTORY | O_CLOEXEC);
if (dfd < 0)
exit_log("%m - Failed to open base directory \"%s\"", base_dir);
ret = mkdirat(dfd, "detached-move-mount", 0755);
if (ret < 0)
exit_log("%m - Failed to create required temporary directories");
ret = snprintf(target, sizeof(target), "%s/detached-move-mount", base_dir);
if (ret < 0 || (size_t)ret >= sizeof(target))
exit_log("%m - Failed to assemble target path");
/*
* Having a mount table with 10000 mounts is already quite excessive
* and shoult account even for weird test systems.
*/
for (size_t i = 0; i < 10000; i++) {
fd_tree = sys_open_tree(dfd, "detached-move-mount",
OPEN_TREE_CLONE |
OPEN_TREE_CLOEXEC |
AT_EMPTY_PATH);
if (fd_tree < 0) {
fprintf(stderr, "%m - Failed to open %d(detached-move-mount)", dfd);
exit_code = EXIT_FAILURE;
break;
}
ret = sys_move_mount(fd_tree, "", dfd, "detached-move-mount", MOVE_MOUNT_F_EMPTY_PATH);
if (ret < 0) {
if (errno == ENOSPC)
fprintf(stderr, "%m - Buggy mount counting");
else
fprintf(stderr, "%m - Failed to attach mount to %d(detached-move-mount)", dfd);
exit_code = EXIT_FAILURE;
break;
}
close(fd_tree);
ret = umount2(target, MNT_DETACH);
if (ret < 0) {
fprintf(stderr, "%m - Failed to unmount %s", target);
exit_code = EXIT_FAILURE;
break;
}
}
(void)unlinkat(dfd, "detached-move-mount", AT_REMOVEDIR);
close(dfd);
exit(exit_code);
}
and wait for the kernel to refuse any new mounts by returning ENOSPC.
How many iterations are needed depends on the number of mounts in your
system. Assuming you have something like 50 mounts on a standard system
it should be almost instantaneous.
The root cause of this is that detached mounts aren't handled correctly
when source and target mount are identical and reside on a shared mount
causing a broken mount tree where the detached source itself is
propagated which propagation prevents for regular bind-mounts and new
mounts. This ultimately leads to a miscalculation of the number of
mounts in the mount namespace.
Detached mounts created via
open_tree(fd, path, OPEN_TREE_CLONE)
are essentially like an unattached new mount, or an unattached
bind-mount. They can then later on be attached to the filesystem via
move_mount() which calls into attach_recursive_mount(). Part of
attaching it to the filesystem is making sure that mounts get correctly
propagated in case the destination mountpoint is MS_SHARED, i.e. is a
shared mountpoint. This is done by calling into propagate_mnt() which
walks the list of peers calling propagate_one() on each mount in this
list making sure it receives the propagation event.
The propagate_one() functions thereby skips both new mounts and bind
mounts to not propagate them "into themselves". Both are identified by
checking whether the mount is already attached to any mount namespace in
mnt->mnt_ns. The is what the IS_MNT_NEW() helper is responsible for.
However, detached mounts have an anonymous mount namespace attached to
them stashed in mnt->mnt_ns which means that IS_MNT_NEW() doesn't
realize they need to be skipped causing the mount to propagate "into
itself" breaking the mount table and causing a disconnect between the
number of mounts recorded as being beneath or reachable from the target
mountpoint and the number of mounts actually recorded/counted in
ns->mounts ultimately causing an overflow which in turn prevents any new
mounts via the ENOSPC issue.
So teach propagation to handle detached mounts by making it aware of
them. I've been tracking this issue down for the last couple of days and
then verifying that the fix is correct by
unmounting everything in my current mount table leaving only /proc and
/sys mounted and running the reproducer above overnight verifying the
number of mounts counted in ns->mounts. With this fix the counts are
correct and the ENOSPC issue can't be reproduced.
This change will only have an effect on mounts created with the new
mount API since detached mounts cannot be created with the old mount API
so regressions are extremely unlikely.
Link: https://lore.kernel.org/r/20210306101010.243666-1-christian.brauner@ubuntu.com
Fixes: 2db154b3ea ("vfs: syscall: Add move_mount(2) to move mounts around")
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c119565a15a628efdfa51352f9f6c5186e506a1c upstream.
On book3s/32, page protection is defined by the PP bits in the PTE
which provide the following protection depending on the access
keys defined in the matching segment register:
- PP 00 means RW with key 0 and N/A with key 1.
- PP 01 means RW with key 0 and RO with key 1.
- PP 10 means RW with both key 0 and key 1.
- PP 11 means RO with both key 0 and key 1.
Since the implementation of kernel userspace access protection,
PP bits have been set as follows:
- PP00 for pages without _PAGE_USER
- PP01 for pages with _PAGE_USER and _PAGE_RW
- PP11 for pages with _PAGE_USER and without _PAGE_RW
For kernelspace segments, kernel accesses are performed with key 0
and user accesses are performed with key 1. As PP00 is used for
non _PAGE_USER pages, user can't access kernel pages not flagged
_PAGE_USER while kernel can.
For userspace segments, both kernel and user accesses are performed
with key 0, therefore pages not flagged _PAGE_USER are still
accessible to the user.
This shouldn't be an issue, because userspace is expected to be
accessible to the user. But unlike most other architectures, powerpc
implements PROT_NONE protection by removing _PAGE_USER flag instead of
flagging the page as not valid. This means that pages in userspace
that are not flagged _PAGE_USER shall remain inaccessible.
To get the expected behaviour, just mimic other architectures in the
TLB miss handler by checking _PAGE_USER permission on userspace
accesses as if it was the _PAGE_PRESENT bit.
Note that this problem only is only for 603 cores. The 604+ have
an hash table, and hash_page() function already implement the
verification of _PAGE_USER permission on userspace pages.
Fixes: f342adca3a ("powerpc/32s: Prepare Kernel Userspace Access Protection")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Christoph Plattner <christoph.plattner@thalesgroup.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4a0c6e3bb8f0c162457bf54d9bc6fd8d7b55129f.1612160907.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0bd52c591a1070c54dc428e926660eb4f981099 upstream.
Commit b102f0c522 ("mt76: fix array overflow on receiving too many
fragments for a packet") fixes a possible OOB access but it introduces a
memory leak since the pending frame is not released to page_frag_cache
if the frag array of skb_shared_info is full. Commit 93a1d4791c10
("mt76: dma: fix a possible memory leak in mt76_add_fragment()") fixes
the issue but does not free the truncated skb that is forwarded to
mac80211 layer. Fix the leftover issue discarding even truncated skbs.
Fixes: 93a1d4791c10 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/a03166fcc8214644333c68674a781836e0f57576.1612697217.git.lorenzo@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67eb211487f0c993d9f402d1c196ef159fd6a3b5 upstream.
The last change to ibmvnic_set_mac(), 8fc3672a8a, meant to prevent
users from setting an invalid MAC address on an ibmvnic interface
that has not been brought up yet. The change also prevented the
requested MAC address from being stored by the adapter object for an
ibmvnic interface when the state of the ibmvnic interface is
VNIC_PROBED - that is after probing has finished but before the
ibmvnic interface is brought up. The MAC address stored by the
adapter object is used and sent to the hypervisor for checking when
an ibmvnic interface is brought up.
The ibmvnic driver ignoring the requested MAC address when in
VNIC_PROBED state caused LACP bonds (bonds in 802.3ad mode) with more
than one slave to malfunction. The bonding code must be able to
change the MAC address of its slaves before they are brought up
during enslaving. The inability of kernels with 8fc3672a8a to set
the MAC addresses of bonding slaves is observable in the output of
"ip address show". The MAC addresses of the slaves are the same as
the MAC address of the bond on a working system whereas the slaves
retain their original MAC addresses on a system with a malfunctioning
LACP bond.
Fixes: 8fc3672a8a ("ibmvnic: fix ibmvnic_set_mac")
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6881b07fdd24850def1f03761c66042b983ff86e upstream.
GCC 7.5 reports:
../drivers/net/ethernet/ibm/ibmvnic.c: In function 'ibmvnic_reset_init':
../drivers/net/ethernet/ibm/ibmvnic.c:5373:51: warning: 'old_num_tx_queues' may be used uninitialized in this function [-Wmaybe-uninitialized]
../drivers/net/ethernet/ibm/ibmvnic.c:5373:6: warning: 'old_num_rx_queues' may be used uninitialized in this function [-Wmaybe-uninitialized]
The variable is initialized only if(reset) and used only if(reset &&
something) so this is a false positive. However, there is no reason to
not initialize the variables unconditionally avoiding the warning.
Fixes: 635e442f4a ("ibmvnic: merge ibmvnic_reset_init and ibmvnic_init")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b2aedabc44e9660f90ccf7ba1ca2706d75f411f upstream.
xsk_lookup_bpf_maps, based on prog_fd, looks whether current prog has a
reference to XSKMAP. BPF prog can include insns that work on various BPF
maps and this is covered by iterating through map_ids.
The bpf_map_info that is passed to bpf_obj_get_info_by_fd for filling
needs to be cleared at each iteration, so that it doesn't contain any
outdated fields and that is currently missing in the function of
interest.
To fix that, zero-init map_info via memset before each
bpf_obj_get_info_by_fd call.
Also, since the area of this code is touched, in general strcmp is
considered harmful, so let's convert it to strncmp and provide the
size of the array name for current map_info.
While at it, do s/continue/break/ once we have found the xsks_map to
terminate the search.
Fixes: 5750902a6e ("libbpf: proper XSKMAP cleanup")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20210303185636.18070-4-maciej.fijalkowski@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bc6699881012b5bd5d49fa861a69a37fc01b49c upstream.
We mmap the umem region, but we never munmap it.
Add the missing call at the end of the cleanup.
Fixes: 3945b37a97 ("samples/bpf: use hugepages in xdpsock app")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20210303185636.18070-3-maciej.fijalkowski@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6185266c5a853bb0f2a459e3ff594546f277609b upstream.
The verifier test labelled "valid read map access into a read-only array
2" calls the bpf_csum_diff() helper and checks its return value. However,
architecture implementations of csum_partial() (which is what the helper
uses) differ in whether they fold the return value to 16 bit or not. For
example, x86 version has ...
if (unlikely(odd)) {
result = from32to16(result);
result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
}
... while generic lib/checksum.c does:
result = from32to16(result);
if (odd)
result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
This makes the helper return different values on different architectures,
breaking the test on non-x86. To fix this, add an additional instruction
to always mask the return value to 16 bits, and update the expected return
value accordingly.
Fixes: fb2abb73e5 ("bpf, selftest: test {rd, wr}only flags and direct value access")
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210228103017.320240-1-yauheni.kaliuta@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 557c223b643a35effec9654958d8edc62fd2603a upstream.
In bpf geneve tunnel test we set geneve option on tx side. On rx side we
only call bpf_skb_get_tunnel_opt(). Since commit 9c2e14b481 ("ip_tunnels:
Set tunnel option flag when tunnel metadata is present") geneve_rx() will
not add TUNNEL_GENEVE_OPT flag if there is no geneve option, which cause
bpf_skb_get_tunnel_opt() return ENOENT and _geneve_get_tunnel() in
test_tunnel_kern.c drop the packet.
As it should be valid that bpf_skb_get_tunnel_opt() return error when
there is not tunnel option, there is no need to drop the packet and
break all geneve rx traffic. Just set opt_class to 0 in this test and
keep returning TC_ACT_OK.
Fixes: 933a741e3b ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/bpf/20210224081403.1425474-1-liuhangbin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9032dba5a2b2bbf0fdce67c8795300ec9923b43 upstream.
If phy uses generic driver and autoneg is on, enter command
"ethtool -s eth0 speed 50" will not change phy speed actually, but
command "ethtool eth0" shows speed is 50Mb/s because phydev->speed
has been set to 50 and no update later.
And duplex setting has same problem too.
However, if autoneg is on, phy only changes speed and duplex according to
phydev->advertising, but not phydev->speed and phydev->duplex. So in this
case, phydev->speed and phydev->duplex don't need to be set in function
phy_ethtool_ksettings_set() if autoneg is on.
Fixes: 51e2a3846e ("PHY: Avoid unnecessary aneg restarts")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4372339efc06bc2a796f4cc9d0a7a929dfda4967 upstream.
There were a few remaining tunnel drivers that didn't receive the prior
conversion to icmp{,v6}_ndo_send. Knowing now that this could lead to
memory corrution (see ee576c47db60 ("net: icmp: pass zeroed opts from
icmp{,v6}_ndo_send before sending") for details), there's even more
imperative to have these all converted. So this commit goes through the
remaining cases that I could find and does a boring translation to the
ndo variety.
The Fixes: line below is the merge that originally added icmp{,v6}_
ndo_send and converted the first batch of icmp{,v6}_send users. The
rationale then for the change applies equally to this patch. It's just
that these drivers were left out of the initial conversion because these
network devices are hiding in net/ rather than in drivers/net/.
Cc: Florian Westphal <fw@strlen.de>
Cc: Willem de Bruijn <willemb@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Fixes: 803381f9f1 ("Merge branch 'icmp-account-for-NAT-when-sending-icmps-from-ndo-layer'")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03a3ca37e4c6478e3a84f04c8429dd5889e107fd upstream.
Under extremely rare conditions TCP early demux will retrieve the wrong
socket.
1. local machine establishes a connection to a remote server, S, on port
p.
This gives:
laddr:lport -> S:p
... both in tcp and conntrack.
2. local machine establishes a connection to host H, on port p2.
2a. TCP stack choses same laddr:lport, so we have
laddr:lport -> H:p2 from TCP point of view.
2b). There is a destination NAT rewrite in place, translating
H:p2 to S:p. This results in following conntrack entries:
I) laddr:lport -> S:p (origin) S:p -> laddr:lport (reply)
II) laddr:lport -> H:p2 (origin) S:p -> laddr:lport2 (reply)
NAT engine has rewritten laddr:lport to laddr:lport2 to map
the reply packet to the correct origin.
When server sends SYN/ACK to laddr:lport2, the PREROUTING hook
will undo-the SNAT transformation, rewriting IP header to
S:p -> laddr:lport
This causes TCP early demux to associate the skb with the TCP socket
of the first connection.
The INPUT hook will then reverse the DNAT transformation, rewriting
the IP header to H:p2 -> laddr:lport.
Because packet ends up with the wrong socket, the new connection
never completes: originator stays in SYN_SENT and conntrack entry
remains in SYN_RECV until timeout, and responder retransmits SYN/ACK
until it gives up.
To resolve this, orphan the skb after the input rewrite:
Because the source IP address changed, the socket must be incorrect.
We can't move the DNAT undo to prerouting due to backwards
compatibility, doing so will make iptables/nftables rules to no longer
match the way they did.
After orphan, the packet will be handed to the next protocol layer
(tcp, udp, ...) and that will repeat the socket lookup just like as if
early demux was disabled.
Fixes: 41063e9dd1 ("ipv4: Early TCP socket demux.")
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1427
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2107d45f17bedd7dbf4178462da0ac223835a2a7 upstream.
getsockopt(TCP_ZEROCOPY_RECEIVE) has a bug where we read a
user-provided "len" field of type signed int, and then compare the
value to the result of an "offsetofend" operation, which is unsigned.
Negative values provided by the user will be promoted to large
positive numbers; thus checking that len < offsetofend() will return
false when the intention was that it return true.
Note that while len is originally checked for negative values earlier
on in do_tcp_getsockopt(), subsequent calls to get_user() re-read the
value from userspace which may have changed in the meantime.
Therefore, re-add the check for negative values after the call to
get_user in the handler code for TCP_ZEROCOPY_RECEIVE.
Fixes: c8856c0514 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Arjun Roy <arjunroy@google.com>
Link: https://lore.kernel.org/r/20210225232628.4033281-1-arjunroy.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2712625200ed69c642b9abc3a403830c4643364c upstream.
This patch prevents a potentially destructive race condition. The
device is fully operational on the bus after entering Normal Mode, so
zeroing the MRAM after entering this mode may lead to loss of
information, e.g. new received messages.
This patch fixes the problem by first initializing the MRAM, then
bringing the device into Normale Mode.
Fixes: 5443c226ba ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Link: https://lore.kernel.org/r/20210226163440.313628-1-torin@maxiluxsystems.com
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 449052cfebf624b670faa040245d3feed770d22f upstream.
Assert HALT bit to enter freeze mode, there is a premise that FRZ bit is
asserted. This patch asserts FRZ bit in flexcan_chip_freeze, although
the reset value is 1b'1. This is a prepare patch, later patch will
invoke flexcan_chip_freeze() to enter freeze mode, which polling freeze
mode acknowledge.
Fixes: b1aa1c7a21 ("can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze")
Link: https://lore.kernel.org/r/20210218110037.16591-2-qiangqing.zhang@nxp.com
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e940e0895a82c6fbaa259f2615eb52b57ee91a7e upstream.
There are two ref count variables controlling the free()ing of a socket:
- struct sock::sk_refcnt - which is changed by sock_hold()/sock_put()
- struct sock::sk_wmem_alloc - which accounts the memory allocated by
the skbs in the send path.
In case there are still TX skbs on the fly and the socket() is closed,
the struct sock::sk_refcnt reaches 0. In the TX-path the CAN stack
clones an "echo" skb, calls sock_hold() on the original socket and
references it. This produces the following back trace:
| WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134
| refcount_t: addition on 0; use-after-free.
| Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E)
| CPU: 0 PID: 280 Comm: test_can.sh Tainted: G E 5.11.0-04577-gf8ff6603c617 #203
| Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
| Backtrace:
| [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220
| [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8)
| [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90
| [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2
| [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540
| [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50)
| [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c)
| [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600
| [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00
| [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600
| [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400
| [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534)
To fix this problem, only set skb ownership to sockets which have still
a ref count > 0.
Fixes: 0ae89beb28 ("can: add destructor for self generated skbs")
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Andre Naujoks <nautsch2@gmail.com>
Link: https://lore.kernel.org/r/20210226092456.27126-1-o.rempel@pengutronix.de
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e59e8856758eb5a2dfe1f831ef53b168fd58105 upstream.
Commit 5ee759cda5 ("l2tp: use standard API for warning log messages")
changed a number of warnings about invalid packets in the receive path
so that they are always shown, instead of only when a special L2TP debug
flag is set. Even with rate limiting these warnings can easily cause
significant log spam - potentially triggered by a malicious party
sending invalid packets on purpose.
In addition these warnings were noticed by projects like Tunneldigger [1],
which uses L2TP for its data path, but implements its own control
protocol (which is sufficiently different from L2TP data packets that it
would always be passed up to userspace even with future extensions of
L2TP).
Some of the warnings were already redundant, as l2tp_stats has a counter
for these packets. This commit adds one additional counter for invalid
packets that are passed up to userspace. Packets with unknown session are
not counted as invalid, as there is nothing wrong with the format of
these packets.
With the additional counter, all of these messages are either redundant
or benign, so we reduce them to pr_debug_ratelimited().
[1] https://github.com/wlanslovenija/tunneldigger/issues/160
Fixes: 5ee759cda5 ("l2tp: use standard API for warning log messages")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d348ede32e99d3a04863e9f9b28d224456118c27 upstream.
A packet with skb_inner_network_header(skb) == skb_network_header(skb)
and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers
from the packet. Subsequently, the call to skb_mac_gso_segment will
again call mpls_gso_segment with the same packet leading to an infinite
loop. In addition, ensure that the header length is a multiple of four,
which should hold irrespective of the number of stacked labels.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 924a9bc362a5223cd448ca08c3dde21235adc310 upstream.
For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't
set) based on the type in the virtio net hdr, but the skb could contain
anything since it could come from packet_snd through a raw socket. If
there is a mismatch between what virtio_net_hdr_set_proto sets and
the actual protocol, then the skb could be handled incorrectly later
on.
An example where this poses an issue is with the subsequent call to
skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set
correctly. A specially crafted packet could fool
skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned.
Avoid blindly trusting the information provided by the virtio net header
by checking that the protocol in the packet actually matches the
protocol set by virtio_net_hdr_set_proto. Note that since the protocol
is only checked if skb->dev implements header_ops->parse_protocol,
packets from devices without the implementation are not checked at this
stage.
Fixes: 9274124f02 ("net: stricter validation of untrusted gso packets")
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89e5c58fc1e2857ccdaae506fb8bc5fed57ee063 upstream.
We noticed a GRO issue for UDP-based encaps such as vxlan/geneve when the
csum for the UDP header itself is 0. In that case, GRO aggregation does
not take place on the phys dev, but instead is deferred to the vxlan/geneve
driver (see trace below).
The reason is essentially that GRO aggregation bails out in udp_gro_receive()
for such case when drivers marked the skb with CHECKSUM_UNNECESSARY (ice, i40e,
others) where for non-zero csums 2abb7cdc0d ("udp: Add support for doing
checksum unnecessary conversion") promotes those skbs to CHECKSUM_COMPLETE
and napi context has csum_valid set. This is however not the case for zero
UDP csum (here: csum_cnt is still 0 and csum_valid continues to be false).
At the same time 57c67ff4bd ("udp: additional GRO support") added matches
on !uh->check ^ !uh2->check as part to determine candidates for aggregation,
so it certainly is expected to handle zero csums in udp_gro_receive(). The
purpose of the check added via 662880f442 ("net: Allow GRO to use and set
levels of checksum unnecessary") seems to catch bad csum and stop aggregation
right away.
One way to fix aggregation in the zero case is to only perform the !csum_valid
check in udp_gro_receive() if uh->check is infact non-zero.
Before:
[...]
swapper 0 [008] 731.946506: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100400 len=1500 (1)
swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100200 len=1500
swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101100 len=1500
swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101700 len=1500
swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101b00 len=1500
swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100600 len=1500
swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100f00 len=1500
swapper 0 [008] 731.946509: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100a00 len=1500
swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100500 len=1500
swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100700 len=1500
swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101d00 len=1500 (2)
swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101000 len=1500
swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101c00 len=1500
swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101400 len=1500
swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100e00 len=1500
swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101600 len=1500
swapper 0 [008] 731.946521: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100800 len=774
swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497100400 len=14032 (1)
swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497101d00 len=9112 (2)
[...]
# netperf -H 10.55.10.4 -t TCP_STREAM -l 20
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 20.01 13129.24
After:
[...]
swapper 0 [026] 521.862641: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479000 len=11286 (1)
swapper 0 [026] 521.862643: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479000 len=11236 (1)
swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d478500 len=2898 (2)
swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479f00 len=8490 (3)
swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d478500 len=2848 (2)
swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479f00 len=8440 (3)
[...]
# netperf -H 10.55.10.4 -t TCP_STREAM -l 20
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 20.01 24576.53
Fixes: 57c67ff4bd ("udp: additional GRO support")
Fixes: 662880f442 ("net: Allow GRO to use and set levels of checksum unnecessary")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tom Herbert <tom@herbertland.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20210226212248.8300-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b9ea7206d7e1fdd7419cbd10badd3b2c80d04b4 upstream.
When transmitting to a receiver in dynamic SMPS mode, all transmissions that
use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to
give the receiver's extra chains some time to wake up.
This fixes the tx rate getting stuck at <= MCS7 for some clients, especially
Intel ones, which make aggressive use of SMPS.
Cc: stable@vger.kernel.org
Reported-by: Martin Kennedy <hurricos@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210214184911.96702-1-nbd@nbd.name
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c810cf20feef0d4338e9b424ab7f2644a8b353e upstream.
The MIPS Poly1305 implementation is generic MIPS code written such as to
support down to the original MIPS I and MIPS III ISA for the 32-bit and
64-bit variant respectively. Lift the current limitation then to enable
code for MIPSr1 ISA or newer processors only and have it available for
all MIPS processors.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: a11d055e7a ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation")
Cc: stable@vger.kernel.org # v5.5+
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9619d5e5174867536b7e558683bc4408eab833f upstream.
Depending on the number of online CPUs in the original kernel, it is
likely for CPU #0 to be offline in a kdump kernel. The associated IRQs
in the affinity mappings provided by irq_create_affinity_masks() are
thus not started by irq_startup(), as per-design with managed IRQs.
This can be a problem with multi-queue block devices driven by blk-mq :
such a non-started IRQ is very likely paired with the single queue
enforced by blk-mq during kdump (see blk_mq_alloc_tag_set()). This
causes the device to remain silent and likely hangs the guest at
some point.
This is a regression caused by commit 9ea69a55b3 ("powerpc/pseries:
Pass MSI affinity to irq_create_mapping()"). Note that this only happens
with the XIVE interrupt controller because XICS has a workaround to bypass
affinity, which is activated during kdump with the "noirqdistrib" kernel
parameter.
The issue comes from a combination of factors:
- discrepancy between the number of queues detected by the multi-queue
block driver, that was used to create the MSI vectors, and the single
queue mode enforced later on by blk-mq because of kdump (i.e. keeping
all queues fixes the issue)
- CPU#0 offline (i.e. kdump always succeed with CPU#0)
Given that I couldn't reproduce on x86, which seems to always have CPU#0
online even during kdump, I'm not sure where this should be fixed. Hence
going for another approach : fine-grained affinity is for performance
and we don't really care about that during kdump. Simply revert to the
previous working behavior of ignoring affinity masks in this case only.
Fixes: 9ea69a55b3 ("powerpc/pseries: Pass MSI affinity to irq_create_mapping()")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210215094506.1196119-1-groug@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ae5fbd2107959b68ac69a8b75412208663aea88 upstream.
Running "perf mem record" in powerpc platforms with selinux enabled
resulted in soft lockup's. Below call-trace was seen in the logs:
CPU: 58 PID: 3751 Comm: sssd_nss Not tainted 5.11.0-rc7+ #2
NIP: c000000000dff3d4 LR: c000000000dff3d0 CTR: 0000000000000000
REGS: c000007fffab7d60 TRAP: 0100 Not tainted (5.11.0-rc7+)
...
NIP _raw_spin_lock_irqsave+0x94/0x120
LR _raw_spin_lock_irqsave+0x90/0x120
Call Trace:
0xc00000000fd47260 (unreliable)
skb_queue_tail+0x3c/0x90
audit_log_end+0x6c/0x180
common_lsm_audit+0xb0/0xe0
slow_avc_audit+0xa4/0x110
avc_has_perm+0x1c4/0x260
selinux_perf_event_open+0x74/0xd0
security_perf_event_open+0x68/0xc0
record_and_restart+0x6e8/0x7f0
perf_event_interrupt+0x22c/0x560
performance_monitor_exception0x4c/0x60
performance_monitor_common_virt+0x1c8/0x1d0
interrupt: f00 at _raw_spin_lock_irqsave+0x38/0x120
NIP: c000000000dff378 LR: c000000000b5fbbc CTR: c0000000007d47f0
REGS: c00000000fd47860 TRAP: 0f00 Not tainted (5.11.0-rc7+)
...
NIP _raw_spin_lock_irqsave+0x38/0x120
LR skb_queue_tail+0x3c/0x90
interrupt: f00
0x38 (unreliable)
0xc00000000aae6200
audit_log_end+0x6c/0x180
audit_log_exit+0x344/0xf80
__audit_syscall_exit+0x2c0/0x320
do_syscall_trace_leave+0x148/0x200
syscall_exit_prepare+0x324/0x390
system_call_common+0xfc/0x27c
The above trace shows that while the CPU was handling a performance
monitor exception, there was a call to security_perf_event_open()
function. In powerpc core-book3s, this function is called from
perf_allow_kernel() check during recording of data address in the
sample via perf_get_data_addr().
Commit da97e18458 ("perf_event: Add support for LSM and SELinux
checks") introduced security enhancements to perf. As part of this
commit, the new security hook for perf_event_open() was added in all
places where perf paranoid check was previously used. In powerpc
core-book3s code, originally had paranoid checks in
perf_get_data_addr() and power_pmu_bhrb_read(). So
perf_paranoid_kernel() checks were replaced with perf_allow_kernel()
in these PMU helper functions as well.
The intention of paranoid checks in core-book3s was to verify
privilege access before capturing some of the sample data. Along with
paranoid checks, perf_allow_kernel() also does a
security_perf_event_open(). Since these functions are accessed while
recording a sample, we end up calling selinux_perf_event_open() in PMI
context. Some of the security functions use spinlock like
sidtab_sid2str_put(). If a perf interrupt hits under a spin lock and
if we end up in calling selinux hook functions in PMI handler, this
could cause a dead lock.
Since the purpose of this security hook is to control access to
perf_event_open(), it is not right to call this in interrupt context.
The paranoid checks in powerpc core-book3s were done at interrupt time
which is also not correct.
Reference commits:
Commit cd1231d703 ("powerpc/perf: Prevent kernel address leak via perf_get_data_addr()")
Commit bb19af8160 ("powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer")
We only allow creation of events that have already passed the
privilege checks in perf_event_open(). So these paranoid checks are
not needed at event time. As a fix, patch uses
'event->attr.exclude_kernel' check to prevent exposing kernel address
for userspace only sampling.
Fixes: cd1231d703 ("powerpc/perf: Prevent kernel address leak via perf_get_data_addr()")
Cc: stable@vger.kernel.org # v4.17+
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1614247839-1428-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c33cb0020ee6dd96cc9976d6085a7d8422f6dbed upstream.
Apparently, <linux/netfilter/nfnetlink_cthelper.h> and
<linux/netfilter/nfnetlink_acct.h> could not be included into the same
compilation unit because of a cut-and-paste typo in the former header.
Fixes: 12f7a50533 ("netfilter: add user-space connection tracking helper infrastructure")
Cc: <stable@vger.kernel.org> # v3.6
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6e6a6828c517fb6819479bf5187df5f39084eb9e ]
Add the NVME_QUIRK_NO_NS_DESC_LIST and NVME_QUIRK_IGNORE_DEV_SUBNQN
quirks for this buggy device.
Reported and tested in https://bugs.mageia.org/show_bug.cgi?id=28417
Signed-off-by: Pascal Terjan <pterjan@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e46f6c6c959d9bb45445c2e8f04a75324a0dfd0 ]
This problem was reported on a SVM guest while executing kexec.
Kexec fails to load the new kernel when the PCID feature is enabled.
When kexec starts loading the new kernel, it starts the process by
resetting the vCPU's and then bringing each vCPU online one by one.
The vCPU reset is supposed to reset all the register states before the
vCPUs are brought online. However, the CR4 register is not reset during
this process. If this register is already setup during the last boot,
all the flags can remain intact. The X86_CR4_PCIDE bit can only be
enabled in long mode. So, it must be enabled much later in SMP
initialization. Having the X86_CR4_PCIDE bit set during SMP boot can
cause a boot failures.
Fix the issue by resetting the CR4 register in init_vmcb().
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <161471109108.30811.6392805173629704166.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d92e279dee56b4b65c1af21f972413f172a9734a ]
This set of devices has SoundWire support along with DMICs.
The DMI information was provided by users for 3 separate skus.
BugLink: https://github.com/thesofproject/linux/issues/2700
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d09cf8d0d791a41a75123e135f604d59f4aa870 ]
The quirk table is a mess, let's reorganize it by generation before
making sure that the quirks are consistent for each generation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4740b969aaf58adeca6829947a3ad8da423976cf ]
Cadence controller will not initiate autonomous speed change if strapped
as Gen2. The Retrain Link bit is set as quirk to enable this speed change.
Link: https://lore.kernel.org/r/20210209144622.26683-3-nadeem@cadence.com
Signed-off-by: Nadeem Athani <nadeem@cadence.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fee03efc69345344c8851596d74d93199b175bfe ]
This commit adds mixer quirks for the Pioneer DJM-900NXS2 mixer. This
device has 6 capture channels, 5 of them allow setting the signal
source. This adds controls for these, similar to the DJM-250Mk2.
However, playpack channels are not controllable via software like on the
250Mk2, as they can only be set manually on the mixing console.
Read-only controls showing the currently selected playback channels are
omitted.
Signed-off-by: Fabian Lesniak <fabian@lesniak-it.de>
Link: https://lore.kernel.org/r/20210205215116.258724-2-fabian@lesniak-it.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a07df82c799013236aa90a140785775eda9f9523 ]
This allows for N different devices to use the pioneer mixer quirk for
setting capture/record type and recording level. The impementation has
not changed much with the exception of an additional mask on
private_value to allow storing of a device index:
DEVICE MASK 0xff000000
GROUP_MASK 0x00ff0000
VALUE_MASK 0x0000ffff
This could be improved by changing the arrays of wValues for each
channel to contain named definitions (e.g. SND_DJM_CAP_LINE). It would
improve readability and perhaps would allow using the same array for
multiple channels. The channel number can be specified on the control
next to the wIndex.
Feedback is very much appreciated as I'm not the most proficient C
programmer but am learning as I go.
Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://lore.kernel.org/r/20210205184256.10201-2-livvy@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc6a31b00739356809dd566e16f2c4325a63285d ]
The ITE8568 EC on the Voyo Winpad A15 presents itself as an I2C-HID
attached keyboard and mouse (which seems to never send any events).
This needs the I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirk, otherwise we get
the following errors:
[ 3688.770850] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3694.915865] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3701.059717] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3707.205944] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3708.227940] i2c_hid i2c-ITE8568:00: can't add hid device: -61
[ 3708.236518] i2c_hid: probe of i2c-ITE8568:00 failed with error -61
Which leads to a significant boot delay.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f7dfda4f2cec580c135fd81d96a05006651c128 ]
The SDHCI_PRESET_FOR_* registers are not set(all read as zeros), so
set the quirk.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20201210165510.76b917e5@xhacker.debian
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f03c30cb814213e36032084a01f49a9e604a3e3 ]
The PC_DBG_ECO_CNTL register on the Adreno A5xx family gets
programmed to some different values on a per-model basis.
At least, this is what we intend to do here;
Unfortunately, though, this register is being overwritten with a
static magic number, right after applying the GPU-specific
configuration (including the GPU-specific quirks) and that is
effectively nullifying the efforts.
Let's remove the redundant and wrong write to the PC_DBG_ECO_CNTL
register in order to retain the wanted configuration for the
target GPU.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
