Fix potential dtc warnings on kirkwoods files
Declare a new pin (RB) usbale for NAND controller on Armada 38x
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWjzh4yMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71c6eAKCJWCDib+4j
So2W8yQbI+glOCfjQACfaFGVosbxIilV4+l1bUZJFXHTSSk=
=uIda
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.16-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.16 (part 1)
Fix potential dtc warnings on kirkwoods files
Declare a new pin (RB) usbale for NAND controller on Armada 38x
* tag 'mvebu-dt-4.16-1' of git://git.infradead.org/linux-mvebu:
arm: kirkwood: dts: Use lower case for bindings notation
ARM: dts: armada-38x: Add NAND RB pinctrl information
Signed-off-by: Olof Johansson <olof@lixom.net>
* r8a7745 (RZ/G1E) SoC
- Enable SMP
Fabrizio Castro says "Add DT node for the Advanced Power Management
Unit (APMU), add the second CPU core, and use "renesas,apmu" as
"enable-method"."
* r8a7743 (RZ/G1M) SoC
- Add node for thermal sensor module with thermal-zone support
* r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
- Add:
+ Renesas Core Match Timer (CMT) support
+ Renesas Timer Pulse Unit PWM Controller (TPU) support
+ Renesas PWM Timer Controller (PWM) support
* r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and
r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms
- Add sound support
* r8a7743 (RZ/G1M), r8a7745 (RZ/G1E) and r8a7792 (R-Car V2H) SoCs
- Allow DTBs of boards of these SoCs to build without any warnings when
compiled with W=1 using gcc-linaro-5.4.1-2017.05
+ Move nodes which have no reg property out of bus, they don't belong there
+ Also sort sub-nodes of root node to allow for easier maintenance
* r8a7790 (R-Car H2), r8a7791 (R-Car M2-W) and r8a7793 (R-Car M2-N) SoCs
- Correct critical CPU temperature
Chris Paterson says "The current R-Car Gen2 device trees define the CPU
critical temperature as 115°C.
The R-Car hardware manuals state that Tc = –40°C to +105°C. The thermal
sensor has an accuracy of ±5°C and there can be a temperature
difference of 1 or 2 degrees between Tjmax and the thermal sensor due
to the location of the latter.
This means that 95°C is a safer value to use.
This value should also apply to r8a7792 but thermal sensor support has
not been added yet."
* r8a7740 (R-Mobile A1) SoC
- Correct TPU register block size
Geert Uytterhoven says "The Timer Pulse Unit has registers that lie
outside the declared register block. Enlarge the register block size to
fix this.
This was probably based on the old platform code, which also assumed a
register block size of 0x100."
-----BEGIN PGP SIGNATURE-----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=2oL+
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM Based SoC DT Updates for v4.16
* r8a7745 (RZ/G1E) SoC
- Enable SMP
Fabrizio Castro says "Add DT node for the Advanced Power Management
Unit (APMU), add the second CPU core, and use "renesas,apmu" as
"enable-method"."
* r8a7743 (RZ/G1M) SoC
- Add node for thermal sensor module with thermal-zone support
* r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
- Add:
+ Renesas Core Match Timer (CMT) support
+ Renesas Timer Pulse Unit PWM Controller (TPU) support
+ Renesas PWM Timer Controller (PWM) support
* r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and
r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms
- Add sound support
* r8a7743 (RZ/G1M), r8a7745 (RZ/G1E) and r8a7792 (R-Car V2H) SoCs
- Allow DTBs of boards of these SoCs to build without any warnings when
compiled with W=1 using gcc-linaro-5.4.1-2017.05
+ Move nodes which have no reg property out of bus, they don't belong there
+ Also sort sub-nodes of root node to allow for easier maintenance
* r8a7790 (R-Car H2), r8a7791 (R-Car M2-W) and r8a7793 (R-Car M2-N) SoCs
- Correct critical CPU temperature
Chris Paterson says "The current R-Car Gen2 device trees define the CPU
critical temperature as 115°C.
The R-Car hardware manuals state that Tc = –40°C to +105°C. The thermal
sensor has an accuracy of ±5°C and there can be a temperature
difference of 1 or 2 degrees between Tjmax and the thermal sensor due
to the location of the latter.
This means that 95°C is a safer value to use.
This value should also apply to r8a7792 but thermal sensor support has
not been added yet."
* r8a7740 (R-Mobile A1) SoC
- Correct TPU register block size
Geert Uytterhoven says "The Timer Pulse Unit has registers that lie
outside the declared register block. Enlarge the register block size to
fix this.
This was probably based on the old platform code, which also assumed a
register block size of 0x100."
* tag 'renesas-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (37 commits)
ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU core
ARM: dts: iwg22d-sodimm: Sound DMA support via DVC on DTS
ARM: dts: iwg22d-sodimm: Sound DMA support via SRC on DTS
ARM: dts: iwg22d-sodimm: Sound DMA support via BUSIF on DTS
ARM: dts: iwg22d-sodimm: Sound DMA support on DTS
ARM: dts: iwg22d-sodimm: Sound PIO support
ARM: dts: iwg22d-sodimm: Enable SGTL5000 audio codec
ARM: dts: r8a7745: Add sound support
ARM: dts: r8a7745: Add audio DMAC support
ARM: dts: r8a7745: Add audio clocks
ARM: dts: r8a7740: Correct TPU register block size
ARM: dts: r8a7743: move timer and thermal-zones nodes out of bus
ARM: dts: r8a7743: sort root sub-nodes alphabetically
ARM: dts: iwg20d-q7-common: Sound DMA support via DVC on DTS
ARM: dts: iwg20d-q7-common: Sound DMA support via SRC on DTS
ARM: dts: iwg20d-q7-common: Sound DMA support via BUSIF on DTS
ARM: dts: iwg20d-q7-common: Sound DMA support on DTS
ARM: dts: iwg20d-q7-common: Sound PIO support
ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec
ARM: dts: r8a7792: move timer node out of bus
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds a DT for the Allo.com Sparky SBC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=z7/8
-----END PGP SIGNATURE-----
Merge tag 'actions-arm-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt
Actions Semi arm based SoC DT for v4.16
This adds a DT for the Allo.com Sparky SBC.
* tag 'actions-arm-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
arm: dts: owl-s500: Add Sparky
dt-bindings: arm: actions: Add Sparky
dt-bindings: Add vendor prefix for Allo.com
Signed-off-by: Olof Johansson <olof@lixom.net>
4.16, please pull the following:
- Stefan updates the BCM283x DTS to make consistent use of the existing GPIO
defines for the polarity specifier
-----BEGIN PGP SIGNATURE-----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=Xax+
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.16/devicetree' of http://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes for
4.16, please pull the following:
- Stefan updates the BCM283x DTS to make consistent use of the existing GPIO
defines for the polarity specifier
* tag 'arm-soc/for-4.16/devicetree' of http://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Use GPIO polarity defines consistently
Signed-off-by: Olof Johansson <olof@lixom.net>
- Use Open Drain flags properly for emulated I2C
- Add the PCI bus to WBD111 and WBD222
- Enable the TVE and panel on DIR-685; the panel driver and
bindings have been merged into the DRI subsystem.
-----BEGIN PGP SIGNATURE-----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=4mrI
-----END PGP SIGNATURE-----
Merge tag 'gemini-dts-update-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
Pull "A second set of Gemini DTS updates for v4.16" from Linus Walleij:
- Use Open Drain flags properly for emulated I2C
- Add the PCI bus to WBD111 and WBD222
- Enable the TVE and panel on DIR-685; the panel driver and
bindings have been merged into the DRI subsystem.
* tag 'gemini-dts-update-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Add TVE/TVC and ILI9322 panel to DIR-685
ARM: dts: Add PCI to WBD111 and WBD222
ARM: dts: Flags D-Link DIR-685 I2C bus gpios
Add a Device Tree for the Allo.com Sparky SBC.
Acked-by: Sudeep Kumar <sudeepkumar@cem-solutions.net>
[AF: Adjusted SPDX-License-Identifier style]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This adds the TVE200/TVC TV-encoder and the Ilitek ILI9322 panel
to the DIR-685 device tree.
This brings graphics to this funky router and it is possible to
even run a console on its tiny screen.
Incidentally this requires us to disable the access to the
parallel (NOR) flash, as the communication pins to the panel
are shared with the flash memory.
To access the flash, a separate kernel with the panel disabled
and the flash enabled should be booted. The pin control selecting
whether to use the lines cannot be altered at runtime due to
hardware constraints.
Cc: David Lechner <david@lechnology.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These GPIOs are used in open drain mode, so make sure to
flag them as such. Use the new separate scl/sda line
GPIO bindings.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the missing clock to CA7 CPU1 node.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlo7+7IQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgWKzCACiOs6rif6zIG6hBl29S5q8BGIwD1K234Br
4u05OIUzlol41p0cp5wBBuYyUd9jQdXhYVZLVk+iKsygOJEZY/u1jKa1gy6nVQxu
Uqb3CgVq0QjbGIMWEIssOE2oML4Rhgx9dmMhVoVYgP+A1yFiGRnevp0ZKlYc+iHM
kqaZfno2WWBARgLMuJ90kyaZhUSyjweWi3rJiFCc5Hx0oeX/ENKFyI0NftUfjkD1
2bgDAkRiOK4ieK8LqM1BbUvhKPvEP5mR/hZsqa7AykXf+oYKk9ZAxoXx2EndyCN0
dbQppp4fqvWusTDP+xi1lrEq5JVhPHuBtcR1ntzfSOF1D3K00PA8
=b8Nk
-----END PGP SIGNATURE-----
Merge tag 'v4.16-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "Rockchip dts32 changes for 4.16" from Heiko Stübner:
Just the reset property for the rk3066a-rayeager emac phy
* tag 'v4.16-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add reset property for rk3066a-rayeager emac phy
- update mmc nodes for mt7623
- mt7623 change mmc card detection pin to active low
- mt7623 set unit address to lower case
-----BEGIN PGP SIGNATURE-----
iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAlo6rUsXHG1hdHRoaWFz
LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00P2IxAAomPDaranBpoikV2bOKVdCGfv
lQaL5cDsWMBzFs6i6y2galJwiR0Ci4T6RoKsXyZViQd/D5r5SRMsG6CEV+cpU9Ea
vmFenX5lBvqerLDThc73C4OzfeyuwHknSDCjjazehoxE2XiWoFIXhjx7PWd3o+W0
wfNd6Wu4vTzukkR5K3dMXQkoCWEdJRtclZfAge2pKI9p/6q1gWadiqMOZ+uSuIE9
9VC0/aFZV6IoZGuZ1xfxeZzfmM7aXPgghQcAwx2Sh8jt6YOQJkahqgB5k4W+XeuZ
JsWbpHsFreK8r5wymqPif/BTQHaoLzUIooKQ4n/5I2ael6dfpKGKa2TsVfs5DN30
vd3NWFECi9wAtYzm3YKOzceW8n5Ku0sFTO+lY5vTRiQAysmk2ByZP5JmU0OT6YsK
w74DYIwUr8VOrD4NjjUq0CbIKsq4iW1zQZtlBA3bJ6yMV0k1xGirigTdPqleRpP+
zIJJq/csQV8clXUOCtYBQ/Yx67RgUkzZI631+xp8o+kau2PQo+iL8H7ectsRib1P
IYkwyK+OwCut3tGhm1E7YgrvwMhM923ManAn4psoG38wPzJhFNsXqL+W1jkvzSbZ
OzyMZwEdcZts1ZPWhr82H0uKyjSYGfjNhJnGdJkvdXSDhguruRJJDd+l286f1Bh3
ecfoF7L6e3yR5qtNaMs=
=d/4Y
-----END PGP SIGNATURE-----
Merge tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt
Pull "arm: Updates of armv7 DTS for v4.15-next" from Matthias Brugger:
- add reset cells mt2701 and mt7623 ethsys
- update mmc nodes for mt7623
- mt7623 change mmc card detection pin to active low
- mt7623 set unit address to lower case
* tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
dt-bindings: ARM: Mediatek: Fix ethsys documentation
arm: mt7: dts: Remove leading 0x and 0s from bindings notation
arm: dts: mt7623: fix card detection issue on bananapi-r2
arm: dts: mt7623: update mmc related nodes with the appropriate fallback
arm: dts: mt2701: Add reset-cells
arm: dts: mt7623: Update ethsys binding
These changes enable the video decoder engine found on Tegra20 SoCs.
-----BEGIN PGP SIGNATURE-----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=bS8w
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.16-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
Pull "ARM: tegra: Device tree changes for v4.16-rc1" from Thierry Reding:
These changes enable the video decoder engine found on Tegra20 SoCs.
* tag 'tegra-for-4.16-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add video decoder on Tegra20
ARM: tegra: Add device tree node to describe IRAM on Tegra20
1. Add sound support to Odroid XU4 (and adjustments to Odroid XU3).
2. Enable WiFi on Trats2.
3. Add CPU perf counters to Exynos54xx.
4. Add power domains to certain chipsets.
5. Add Exynos4412 ISP clock controller which finally solves freezes when
accessing ISP clocks while having the ISP power domain turned off.
6. Add Pseudo and True RNG to Exynos5.
7. Minor fixes for Trats2, Odroid XU3/XU4, Exynos5410.
8. Cleanup of some of DTC warnings
-----BEGIN PGP SIGNATURE-----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=auEd
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Pull "Samsung DTS ARM changes for 4.16" from Krzysztof Kozłowski:
1. Add sound support to Odroid XU4 (and adjustments to Odroid XU3).
2. Enable WiFi on Trats2.
3. Add CPU perf counters to Exynos54xx.
4. Add power domains to certain chipsets.
5. Add Exynos4412 ISP clock controller which finally solves freezes when
accessing ISP clocks while having the ISP power domain turned off.
6. Add Pseudo and True RNG to Exynos5.
7. Minor fixes for Trats2, Odroid XU3/XU4, Exynos5410.
8. Cleanup of some of DTC warnings
* tag 'samsung-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Use lower case hex addresses in node unit addresses
ARM: dts: exynos: Add nodes for True Random Number Generator
ARM: dts: exynos: Add DT nodes for PRNG in Exynos5 SoCs
ARM: dts: exynos: Add G3D power domain to Exynos5250
ARM: dts: exynos: Add audio power domain to Exynos5250
ARM: dts: exynos: Fix power domain node names for Exynos5250
ARM: dts: exynos: Add missing interrupt-controller properties to Exynos5410 PMU
ARM: dts: exynos: Add audio power domain support to Exynos542x SoCs
ARM: dts: exynos: Fix property values of LDO15/17 for Odroid XU3/XU4
ARM: dts: exynos: Add Exynos4412 ISP clock controller
ARM: dts: exynos: Move G2D node to exynos5.dtsi
ARM: dts: exynos: Add CPU perf counters to Exynos54xx boards
ARM: dts: exynos: Remove duplicate definitions of SSS nodes for Exynos5
ARM: dts: exynos: Add bcm4334 device node to Trats2
ARM: dts: exynos: Correct Trats2 panel reset line
ARM: dts: exynos: Add sound support for Odroid XU4
ARM: dts: exynos: Switch to dedicated Odroid XU3 sound card binding
-----BEGIN PGP SIGNATURE-----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=10ji
-----END PGP SIGNATURE-----
Merge tag 'gemni-dts-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
Gemini DTS updates, take one
* tag 'gemni-dts-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Add basic devicetree for D-Link DNS-313
ARM: dts: Add ethernet PHYs to the a bunch of Geminis
These changes are mostly improvments for various devices.
Note that these are based on my earlier fixes branch
omap-for-v4.15/fixes-dt to avoid a pointless merge conflict
between a fix and removal. The summary of changes is:
- Fix audio codec reset pin for am335x-pepper and n900, this
has been always broken and won't get fixed until the related
driver changes are also merged in for v4.16, so not urgent
- Fix tps65917 powerhold property for dra76-evm
- Changes to logicpd boards to remove MTD partition information
and to add support for omap35xx variants by setting up common
dts files for the logicpd boards
- Disable dra7 USB metastability workaround, this won't do
anything until the related driver changes are also merged
into v4.16, so not urgent
-----BEGIN PGP SIGNATURE-----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=jzFR
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Dts related changes for omaps for v4.16 merge window" from Tony
Lindgren:
These changes are mostly improvments for various devices.
Note that these are based on my earlier fixes branch
omap-for-v4.15/fixes-dt to avoid a pointless merge conflict
between a fix and removal. The summary of changes is:
- Fix audio codec reset pin for am335x-pepper and n900, this
has been always broken and won't get fixed until the related
driver changes are also merged in for v4.16, so not urgent
- Fix tps65917 powerhold property for dra76-evm
- Changes to logicpd boards to remove MTD partition information
and to add support for omap35xx variants by setting up common
dts files for the logicpd boards
- Disable dra7 USB metastability workaround, this won't do
anything until the related driver changes are also merged
into v4.16, so not urgent
* tag 'omap-for-v4.16/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Move move WiFi bindings to logicpd-torpedo-37xx-devkit
ARM: dts: Add minimal support for LogicPD OMAP35xx Torpedo devkit
ARM: dts: Move most of logicpd-torpedo-37xx-devkit to logicpd-torpedo-baseboard
ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit
ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi
ARM: dts: dra7: Add missing hdmi audio DMA channel information
ARM: dts: dra7: Disable USB metastability workaround for USB2
ARM: dts: omap3: logicpd kits: Remove partition information
ARM: dts: DRA76-EVM: Set powerhold property for tps65917
ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin
This branch contains a series of dts changes from Tero Kristo to
start using clkctrl clocks.
Note that this branch is based on a merge of omap-for-v4.16/soc-signed
and an immutable commit from Tero Kristo fe7020e64f ("clk: ti: omap4:
clkctrl data fixes for opt-clocks") that is also in clk-next.
-----BEGIN PGP SIGNATURE-----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=uhHY
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/dt-clk-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Clock related dts changes for omaps for v4.16 merge window" from
Tony Lindgren:
This branch contains a series of dts changes from Tero Kristo to
start using clkctrl clocks.
Note that this branch is based on a merge of omap-for-v4.16/soc-signed
and an immutable commit from Tero Kristo fe7020e64f ("clk: ti: omap4:
clkctrl data fixes for opt-clocks") that is also in clk-next.
* tag 'omap-for-v4.16/dt-clk-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (57 commits)
ARM: dts: dm816x: add clkctrl nodes
ARM: dts: dm814x: add clkctrl nodes
ARM: dts: am43xx: add clkctrl nodes
ARM: dts: am33xx: add clkctrl nodes
ARM: dts: dra7: add clkctrl nodes
ARM: dts: omap5: add clkctrl nodes
ARM: dts: omap4: add clkctrl nodes
ARM: dts: dm816x: add bus functionality to base PRCM node
ARM: dts: am43xx: add bus functionality to base PRCM node
ARM: dts: am33xx: add bus functionality to base PRCM node
ARM: dts: dra7: add bus functionality to base PRCM nodes
ARM: dts: omap4: add bus functionality to base PRCM nodes
ARM: dts: omap5: add bus functionality to base PRCM nodes
ARM: dts: dm816x: add fck under timers1/2
ARM: dts: dm814x: add fck under timers1/2
ARM: dts: dra7: add fck under timer1
ARM: dts: am43xx: add fck under timers1/2
ARM: dts: am33xx: add fck under timers1/2
ARM: dts: omap4: add fck under timer1
ARM: dts: omap5: add fck under timer1
...
* Convert to named i2c-gpio bindings
Geert Uytterhoeven says "Commits 7d29f509d2 ("dt-bindings: i2c:
i2c-gpio: Add support for named gpios") and 05c7477885 ("i2c: gpio:
Add support for named gpios in DT") introduced named i2c-gpio DT
bindings, and deprecated the more error-prone unnamed variant.
This patch series switches all Renesas boards to the new bindings, and
adds the missing GPIO_OPEN_DRAIN I/O flags, which were implicitly
assumed before..."
... Note that after this series is applied, the i2c-gpio buses are no
longer detected when booting new DTBs on old (v4.14 and older) kernels,
which should not be an issue. Booting old DTBs on new kernels is not
affected."
* Update DTS for CMT DT binding rework
Geert Uytterhoeven says "This patch series updates the CMT device nodes
in the various Renesas DTS files sh_cmt clocksource driver for the recent
DT binding rework that was merged in v4.14-rc1 and v4.15-rc1..."
* Add SMP support to r8a7794 (R-Car E2) SoC
Sergei Shtylyov says "Add the device tree node for the Advanced Power
Management Unit (APMU). Use the "enable-method" prop to point out that
the APMU should be used for the SMP support."
* Correct primary compatible value for eeprom
on r7s72100 (RZ/A1H) genmai and r8a7791 (R-Car M2-W) koelsh boards
Geert Uytterhoeven says "The Renesas part numbers of the two-wire serial
interface EEPROMs do not follow the 24Cxx pattern, but the R1EX24xxx
pattern.
Hence change the primary compatible values to the appropriate variant of
"renesas,r1ex24xxx", like is already done on Gose.""
* Move cec_clock to root node on r8a7791 (R-Car M2-W) koelsh board
r8a7791 (R-Car M2-W) koelsh board
* Use R-Car SDHI and Ether Gen1 and 2 fallback compat strings
Use recently posted R-Car SDHI and Ether Gen 1 and 2 fallback
compat strings in the DT of Renesas ARM based SoCs.
* Add IIC cores to dtsi of r8a7745 (RZ/G1E) SoC
* Rework DT architecture for r8a7745 (RZ/G1E) iW-RainboW-G22D development
platform and add serial support.
Fabrizio Castro says "... define a new DT architecture for the
iW-RainboW-G22D SODIMM Development Platform to include the configuration
with the HDMI daughter board and to define the serial interfaces."
* Add USB function support to
r8a7745 (RZ/G1E) iW-RainboW-G22D development platform
* Add PCIEC and ttySC3 support to r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM
* Add VIN support to r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
* Add CAN and HDMI support to r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and
r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms
-----BEGIN PGP SIGNATURE-----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=Yk5x
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Renesas ARM Based SoC DT Updates for v4.16" from Simon Horman:
* Convert to named i2c-gpio bindings
Geert Uytterhoeven says "Commits 7d29f509d2 ("dt-bindings: i2c:
i2c-gpio: Add support for named gpios") and 05c7477885 ("i2c: gpio:
Add support for named gpios in DT") introduced named i2c-gpio DT
bindings, and deprecated the more error-prone unnamed variant.
This patch series switches all Renesas boards to the new bindings, and
adds the missing GPIO_OPEN_DRAIN I/O flags, which were implicitly
assumed before..."
... Note that after this series is applied, the i2c-gpio buses are no
longer detected when booting new DTBs on old (v4.14 and older) kernels,
which should not be an issue. Booting old DTBs on new kernels is not
affected."
* Update DTS for CMT DT binding rework
Geert Uytterhoeven says "This patch series updates the CMT device nodes
in the various Renesas DTS files sh_cmt clocksource driver for the recent
DT binding rework that was merged in v4.14-rc1 and v4.15-rc1..."
* Add SMP support to r8a7794 (R-Car E2) SoC
Sergei Shtylyov says "Add the device tree node for the Advanced Power
Management Unit (APMU). Use the "enable-method" prop to point out that
the APMU should be used for the SMP support."
* Correct primary compatible value for eeprom
on r7s72100 (RZ/A1H) genmai and r8a7791 (R-Car M2-W) koelsh boards
Geert Uytterhoeven says "The Renesas part numbers of the two-wire serial
interface EEPROMs do not follow the 24Cxx pattern, but the R1EX24xxx
pattern.
Hence change the primary compatible values to the appropriate variant of
"renesas,r1ex24xxx", like is already done on Gose.""
* Move cec_clock to root node on r8a7791 (R-Car M2-W) koelsh board
r8a7791 (R-Car M2-W) koelsh board
* Use R-Car SDHI and Ether Gen1 and 2 fallback compat strings
Use recently posted R-Car SDHI and Ether Gen 1 and 2 fallback
compat strings in the DT of Renesas ARM based SoCs.
* Add IIC cores to dtsi of r8a7745 (RZ/G1E) SoC
* Rework DT architecture for r8a7745 (RZ/G1E) iW-RainboW-G22D development
platform and add serial support.
Fabrizio Castro says "... define a new DT architecture for the
iW-RainboW-G22D SODIMM Development Platform to include the configuration
with the HDMI daughter board and to define the serial interfaces."
* Add USB function support to
r8a7745 (RZ/G1E) iW-RainboW-G22D development platform
* Add PCIEC and ttySC3 support to r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM
* Add VIN support to r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
* Add CAN and HDMI support to r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and
r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms
* tag 'renesas-dt-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (61 commits)
ARM: dts: alt: Convert to named i2c-gpio bindings
ARM: dts: koelsch: Convert to named i2c-gpio bindings
ARM: dts: lager: Convert to named i2c-gpio bindings
ARM: dts: armadillo800eva: Convert to named i2c-gpio bindings
ARM: dts: sh73a0: Remove CMT renesas,channels-mask
ARM: dts: r8a7794: Remove CMT renesas,channels-mask
ARM: dts: r8a7793: Remove CMT renesas,channels-mask
ARM: dts: r8a7791: Remove CMT renesas,channels-mask
ARM: dts: r8a7790: Remove CMT renesas,channels-mask
ARM: dts: r8a7740: Remove CMT renesas,channels-mask
ARM: dts: r8a73a4: Remove CMT renesas,channels-mask
ARM: dts: r8a7794: Update CMT compat strings
ARM: dts: r8a7793: Update CMT compat strings
ARM: dts: r8a7791: Update CMT compat strings
ARM: dts: r8a7790: Update CMT compat strings
ARM: dts: r8a73a4: Update CMT compat string
ARM: dts: r8a7794: Add SMP support
ARM: dts: genmai: Correct primary compatible value for eeprom
ARM: dts: koelsch: Correct primary compatible value for eeprom
ARM: dts: r8a7745: add VIN dt support
...
ARCH_S3C24XX is a very exceptional platform that some DT files in
arch/arm/boot/dts/, but does not select USE_OF.
All the other platforms with DT files correctly select USE_OF
directly or indirectly (Most of them are either ARCH_MULTIPLATFORM
or ARM_SINGLE_ARMV7M).
With ARCH_S3C24XX fixed, "ifeq ($(CONFIG_OF),y)" in DT Makefile
can be deleted.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable sound PIO support on carrier board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic r8a7745(RZ/G1E) part of the sound device node.
This patch is based on the r8a7794 sound work by Sergei Shtylyov.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe the external audio clocks required by the sound driver.
Boards that provide audio clocks need to override the clock frequencies.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Timer Pulse Unit has registers that lie outside the declared
register block. Enlarge the register block size to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device tree node for the Video Decoder Engine found on Tegra20
SoCs.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All Tegra20 SoCs contain 256 KiB IRAM, which is used to store resume
code and by the video decoder engine.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The timer and thermal-zones nodes do not have any register properties and
thus shouldn't be placed on the bus.
This problem is flagged by the compiler as follows:
$ make
DTC arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dtb
arch/arm/boot/dts/r8a7743-iwg20d-q7.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
arch/arm/boot/dts/r8a7743-iwg20d-q7.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
DTC arch/arm/boot/dts/r8a7743-sk-rzg1m.dtb
arch/arm/boot/dts/r8a7743-sk-rzg1m.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
arch/arm/boot/dts/r8a7743-sk-rzg1m.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort root sub-nodes alphabetically to allow for easier maintenance
of this file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable sound PIO support on carrier board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables SGTL5000 audio codec on the carrier board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The timer node does not have any register properties and thus shouldn't be
placed on the bus.
This problem is flagged by the compiler as follows:
$ make dtbs W=1
...
DTC arch/arm/boot/dts/r8a7792-wheat.dtb
arch/arm/boot/dts/r8a7792-blanche.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm/boot/dts/r8a7792-wheat.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort root sub-nodes alphabetically to allow for easier maintenance
of this file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
The timer node does not have any register properties and thus shouldn't be
placed on the bus.
This problem is flagged by the compiler as follows:
$ make dtbs W=1
...
arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
DTC arch/arm/boot/dts/r8a7745-sk-rzg1e.dtb
arch/arm/boot/dts/r8a7745-sk-rzg1e.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort root sub-nodes alphabetically to allow for easier maintenance
of this file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
