- Enable ZTE ZX family support in arm64 defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX25FiAAoJEFBXWFqHsHzOzJ4IAKAxI7W3Ubnhdxdu8akLYm6a
VHtnqSyr43kKCUEbg05+oTmPzXVF7YdnYmZpyy2mhA9+wpGC6vSwtSDM6Tj8KN8H
ZGzR5Op94GPN3RnLRyGlplltMEbH4I8l6A7SsiJ5VB4Uab2x4bmBagW/vG0O+XuP
exzGQoqlrI5N2gmiSf6P+2Y1oEM+JvClvWPdb9zkMb0B4i8kNJgh+efyNaCv7m/R
v0s9f9AhhK3Saj2TSaJuGuZNHw9vZpDUiOuyTOvnc35bJLjy0AsWqw4BfK8NegQE
4tgXiyVdZxOHvUtAQgw7b2Wkcxo+407zDJE1q6HxR2uudpuTHm0hyWxN62MuXm8=
=zgWs
-----END PGP SIGNATURE-----
Merge tag 'zte-defconfig64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/arm64
Pull "ZTE arm64 defconfig updates for 4.9" from Shawn Guo:
- Enable ZTE ZX family support in arm64 defconfig
* tag 'zte-defconfig64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable ZTE ZX related config
Enable common modules for power management; one is to enable
CPUFREQ_DT driver; the driver is used by many platforms by passing OPP
table from device tree.
Also enables thermal related drivers. Firstly we need enable
configuration CPU_THERMAL for CPU cooling device driver, this will bind
thermal zone with CPU cooling device; and enable 'power allocator'
thermal governor.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add PCIe driver for Aardvark for Armada 3700
- enable xhci-platform for A7K/A8K
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlfMQewACgkQCwYYjhRyO9WrKgCeJWuHOFUlMYoZqEYKkdA5aJ9G
iPsAoIFQivT7yCn9p7rJKzKt2NI4skoy
=jIwM
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig64-4.9-1' of git://git.infradead.org/linux-mvebu into next/arm64
Pull "mvebu defconfig64 for 4.9 (part 1)" from Gregory CLEMENT:
- add PCIe driver for Aardvark for Armada 3700
- enable xhci-platform for A7K/A8K
* tag 'mvebu-defconfig64-4.9-1' of git://git.infradead.org/linux-mvebu:
arm64: configs: enable PCIe driver for Aardvark
arm64: defconfig: enable xhci-platform
drivers/char/hw_random/Kconfig has 'default m', so
simply removing this entry from the defconfig will
enable building HW random drivers as modules.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable hisilicon SAS and XGE for hip05 and hip06
- Enable drm, powerkey, bluetooth and adv7511/adv7533 for hikey
- Add PINCTRL to HISI platform
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y80h
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi into next/arm64
Pull "ARM64: hisilicon: defconfig updates for 4.9" from Wei Xu:
- Enable hisilicon SAS and XGE for hip05 and hip06
- Enable drm, powerkey, bluetooth and adv7511/adv7533 for hikey
- Add PINCTRL to HISI platform
* tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi:
Kconfig: ARCH_HISI: Add PINCTRL to HISI platform
arm64: defconfig: enable bluetooth supports as modules
arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKey
arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey
arm64: defconfig: Enable Hisi SAS and HNS
This allows use of the SDHI SD/SDIO controller present on R-Car Gen3 SoCs
and already enabled in the DT of the r8a7795/salvator-x (H3).
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables the driver for the PCIe host controller found on the
Marvell Armada 3700 ARM64 SoCs.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Enable the following items for bluetooth mouse and speaker which base
on HCIUART.
a) CONFIG_BT_HCIUART
b) CONFIG_BT_HCIUART_LL
c) CONFIG_BT_HIDP
Enable bluetooth LED support.
d) CONFIG_BT_LEDS
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable HiSilicon kirin drm driver for HiKey: CONFIG_DRM_HISI_KIRIN
Enable adv7511/adv7533 for HiKey: CONFIG_DRM_I2C_ADV7511
Build these components as modules.
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Now that ACPI is on in the defconfig, the time seems right to enable
drivers for the SD/MMC, DMA, and pin control hardware described in the ACPI
tables of the QDF2432 server platform.
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
When CONFIG_LOCALVERSION_AUTO is disabled, the version string is
just a tag name (or with a '+' appended if HEAD is not a tagged
commit).
During the development (and especially when git-bisecting), longer
version string would be helpful to identify the commit we are running.
This is a default y option, so drop the unset to enable it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Enable options commonly needed by popular virtualization
and container applications. Use modules when possible to
avoid too much overhead for users not interested.
- add namespace and cgroup options needed
- add seccomp - optional, but enhances Qemu etc
- bridge, nat, veth, macvtap and multicast for routing
guests and containers
- btfrs and overlayfs modules for container COW backends
- while near it, make fuse a module instead of built-in.
Generated with make saveconfig and dropping unrelated spurious
change hunks while commiting. bloat-o-meter old-vmlinux vmlinux:
add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652)
....
Total: Before=10515408, After=10604060, chg +0.84%
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some ARM64 platforms (for example the Marvell Armada 7K/8K) use the
generic XHCI platform driver, so it makes sense to enable
CONFIG_USB_XHCI_PLATFORM=y in the defconfig to support XHCI on such
platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes to platform code for 64-bit ARM platforms.
Nearlt all of these are defconfig updates to enable new drivers or old
drivers still used on these 64-bit platforms.
Added platforms for this release are:
- Broadcom BCM2837
- Renesas R8A7796
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vsam
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull 64-bit ARM SoC updates from Olof Johansson:
"Changes to platform code for 64-bit ARM platforms.
Nearly all of these are defconfig updates to enable new drivers or old
drivers still used on these 64-bit platforms.
Added platforms for this release are:
- Broadcom BCM2837
- Renesas R8A7796"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
arm64: remove duplicate PWM entry in defconfig
arm64: Update default configuration
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433
arm64: amlogic: select gxbb clk driver
arm64: defconfig: Enable S2MPS11 clock and S3C RTC driver
arm64: marvell: enable Armada 3700 clock drivers
arm64: defconfig: enable msm8996 pinctrl support
arm64: defconfig: Enable qcom msm8996 clk drivers
arm: defconfig: Enable PM8941 pwr key
arm64: defconfig: enable stmmac and realtek PHY as modules
arm64: Kconfig: select PM{,_GENERIC_DOMAINS} for ARCH_VEXPRESS
arm64: defconfig: enable SENSORS_ARM_SCPI
arm64: defconfig: enable Generic on-chip SRAM driver
arm64: configs: enable PCIe driver for Armada 7K/8K
arm64: Add platform selection for BCM2835.
arm64: defconfig: disable plain NEON implementation of AES
arm64: Allow for different DMA and CPU bus offsets
arm64: defconfig: enable Renesas R8A7796 SoC
arm64: defconfig: Enable Cadence MACB/GEM support
ARM64: Kconfig: Select the Amlogic Meson pin controller driver
...
We merged two patches that both enabled CONFIG_PWM, leading to a harmless
warning:
arch/arm64/configs/defconfig:352:warning: override: reassigning to symbol PWM
This removes one of the two identical lines to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable a bunch of configuration options to enable PMIC, regulators, DSI,
HDMI, XUSB and the GPU on Jetson TX1 as well as a few new features that
are now functional on the Google Pixel C.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJXg7cpAAoJEN0jrNd/PrOhZxQP/ivrqi+21lLdzFzIyuVgtOOe
i+5mVoqfrIx/QCXsRqzgRj4PiTttGaUJKPRLxp3z6bJLRnFRrcuCPF7hTN8Ln+nr
XXMO2rAanvWJ00rYFmqTF/9j4zkHyfbpEjugSh7yO5nrT7QupYQe0RAE7C6d4tGa
QyAr5FZChSPBYIKSKPZ9A+Fhn+cUCTJT0AJdcwcM4W42HR4cgaMniFniK3KJHqZp
3jw3PDgh5+hW7x2axOrhGxWi49lToUytsmCOYaW6x0OuKmiUfRLoBW5+LGhg/xVt
ZZQTyFrIoCiNM1xqufMNwC9tOurtE7D7CHaSxWuTSOa0mljDPgsacRiz3HLpZqFd
3MRlT3vGeeG2XPBMxOdJYrpqn9RP59mex8rDNKOqDEBWHRPfJkCkfy9/uM1qYYl6
8aMehNITnvfqCr+Y7AQHp/Vz2PJRwo8vK0eksrL/K2j7hgFwYAyKDm3qmcwpLooQ
4rQEb0iH5IU4DCL56IqmI0yuHiF2EbxeNjbvywyUJZRPBCCzETCTD1VzaUUO3A2e
5daZIwGwvt5/ZEf+rv99JRa8FNzscpnsivLaiC9u6I3nGUb8J/oZDZmAeP0NDzG9
N6BftJpAuQ5CTLYKna4ADNjF+L2pk/vNWR5EW2aP13BFIiQ99iiJFhJcUbvelkVy
ED4DXclrwVLP/QBYS9QJ
=483Z
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.8-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/arm64
Merge "arm64: tegra: Default configuration updates for v4.8-rc1" from Thierry Reding:
Enable a bunch of configuration options to enable PMIC, regulators, DSI,
HDMI, XUSB and the GPU on Jetson TX1 as well as a few new features that
are now functional on the Google Pixel C.
* tag 'tegra-for-4.8-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: Update default configuration
Enable a couple of drivers that are used on Jetson TX1:
* GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO
expander are used on Jetson TX1 to expand the number of usable GPIOs
on the I/O board. Enable the driver for this expander along with IRQ
support.
* MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620,
RTC_DRV_MAX77686: Enable support for the PMIC and various of its
components found on the Jetson TX1 processor module (p2180).
* RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on
boards, but it can be useful as a wakeup source from suspend to RAM.
* REGULATOR_PWM: The GPU is supplied by a regulator controlled via one
of the Tegra's PWM channels.
* DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an
optional DSI panel on Jetson TX1 as well as the GPU.
* BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if
shipped with a display module, is driver by an LP8557.
* PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on
Jetson TX1.
* PWM, PWM_TEGRA: One of the PWM channels is used to control the
voltage supplied to the GPU.
* NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol
to increase compatibility with distributions.
* MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable
the ChromeOS Embedded Controller and the I2C tunnel that allows the
EC to function as an I2C bridge.
* BATTERY_BQ27XXX: Support the battery charger and monitor found on
the Google Pixel C.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable more drivers for IP blocks for existing Exynos7 and upcoming
Exynos5433:
1. SPI,
2. Watchdog,
3. USB: DWC3, Exynos EHCI and OHCI,
4. Exynos ADC,
5. Samsung PWM.
These are already used by Exynos7 Espresso board or will be used by
Exynos5433 based board.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
The S3C RTC controller on Exynos7 platform uses RTC source clock
from S2MPS11 PMIC. This patch enables the required drivers to make
RTC work on Exynos7 Espresso board.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
1. Enable support for SCPI based sensors(temperature, voltage,
current and power)
2. Enable the Generic on-chip SRAM driver. SRAM is used for SCPI based
communication with SCP on Juno
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r5Ie
-----END PGP SIGNATURE-----
Merge tag 'juno-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/arm64
ARMv8 Juno/Vexpress defconfig updates for v4.8
1. Enable support for SCPI based sensors(temperature, voltage,
current and power)
2. Enable the Generic on-chip SRAM driver. SRAM is used for SCPI based
communication with SCP on Juno
* tag 'juno-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: defconfig: enable SENSORS_ARM_SCPI
arm64: defconfig: enable Generic on-chip SRAM driver
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable the PCIe host controller found on the Armada 7K/8K SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAldpA7YACgkQCwYYjhRyO9UpFwCgoVM2L6jaF0AU9Yg+aR8xeHrF
5xUAnRCe8B0TYqE0Bucj+MwmKXbWTLU7
=sEoy
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig64-4.8-1' of git://git.infradead.org/linux-mvebu into next/arm64
mvebu defconfig64 for 4.8 (part 1)
- Enable the PCIe host controller found on the Armada 7K/8K SoCs
* tag 'mvebu-defconfig64-4.8-1' of git://git.infradead.org/linux-mvebu:
arm64: configs: enable PCIe driver for Armada 7K/8K
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch enables pinctrl support required to boot msm8996/apq8096
boards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable the clk drivers on msm8996. This allows us to boot and
test most device drivers on this SoC.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Some Amlogic GXBB boards use the stmmac ethernet driver. Also, enable
the realtek PHY used on meson-gxbb-odroidc2. The micrel PHY used on the
meson-gxbb-p20x boards is already enabled.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
ARM SCPI Sensors were merged for v4.4 and they are defined in the Juno
dts. Enable it in the defconfig to get them registered automatically in
Juno by default.
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Most of the ARM SoCs have small SRAM memory used for various purposes
that require faster access to data compared to normal DDR.
This patch enables the Generic on-chip SRAM driver on ARM64.
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This patch enables the driver for the PCIe host controller found on
the Marvell Armada 7K/8K ARM64 SoCs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The plain NEON implementation of AES is only suited for v8 cores that lack
the ARMv8 Crypto Extensions but have an implementation of the NEON tbl/tbx
instruction that is not pathetically slow. Unfortunately, this is currently
the empty set, so there is no point in including this implementation by
default. So disable it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch enables the Renesas R8A7796 SoC in the arm64 defconfig.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch enables the cadence MACB/GEM support that is needed
by lg1k SoCs.
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull watchdog updates from Wim Van Sebroeck:
- add support for Fintek F81865 Super-IO chip
- add support for watchdogs (RWDT and SWDT) found on RCar Gen3 based
SoCs from Renesas
- octeon: Handle the FROZEN hot plug notifier actions
- f71808e_wdt fixes and cleanups
- some small improvements in code and documentation
* git://www.linux-watchdog.org/linux-watchdog:
MAINTAINERS: Add file patterns for watchdog device tree bindings
Documentation: Add ebc-c384_wdt watchdog-parameters.txt entry
watchdog: shwdt: Use setup_timer()
watchdog: cpwd: Use setup_timer()
arm64: defconfig: enable Renesas Watchdog Timer
watchdog: renesas-wdt: add driver
watchdog: remove error message when unable to allocate watchdog device
watchdog: f71808e_wdt: Fix WDTMOUT_STS register read
watchdog: f71808e_wdt: Fix typo
watchdog: f71808e_wdt: Add F81865 support
watchdog: sp5100_tco: properly check for new register layouts
watchdog: core: Fix circular locking dependency
watchdog: core: fix trivial typo in a comment
watchdog: hpwdt: Adjust documentation to match latest kernel module parameters.
watchdog: imx2_wdt: add external reset support via dt prop
watchdog: octeon: Handle the FROZEN hot plug notifier actions.
watchdog: qcom: Report reboot reason
As usual, a bunch of commits, mostly adding drivers and other options to
defconfigs.
We are adding three new defconfig files for the newly added 32-bit
machines (aspeed and mps2), the rest is mainly housekeeping.
The changes outside of arch/arm/config/ are for a Kconfig symbol
that got renamed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ecJp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a bunch of commits, mostly adding drivers and other options
to defconfigs.
We are adding three new defconfig files for the newly added 32-bit
machines (aspeed and mps2), the rest is mainly housekeeping.
The changes outside of arch/arm/config/ are for a Kconfig symbol that
got renamed"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits)
ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME
ARM: u8500_defconfig: update sensor config
ARM: u8500_defconfig: remove staging from defconfig
ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT
ARM: at91/defconfig: sama5: add CONFIG_FHANDLE
arm/configs: Add Aspeed defconfig
arm/configs/multi_v5: Add Aspeed ast2400
ARM: at91: sama5: Update defconfig
ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
ARM: multi_v7: Enable Tegra XUSB controller in defconfig
ARM: tegra: Enable XUSB controller in defconfig
ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver
ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC
ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver
ARM: multi_v7_defconfig: add Atmel watchdog timers
ARM: multi_v7_defconfig: add HLCDC drivers as modules
ARM: at91/defconfig: add PDMIC driver to sama5_defconfig
ARM: at91/defconfig: add HLCDC driver to sama5_defconfig
...
One new platform gets added this time: The Cortex-A53 based LG Electronics
LG1K platform used in digital TVs.
The other changes are mostly smaller updates to the defconfig files, to
enable additional platform specific drivers, as they get merged through
the subsystem trees.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ISkf
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes from Arnd Bergmann:
"One new platform gets added this time: The Cortex-A53 based LG
Electronics LG1K platform used in digital TVs.
The other changes are mostly smaller updates to the defconfig files,
to enable additional platform specific drivers, as they get merged
through the subsystem trees"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: configs: add options useful for Armada 7K/8K support
arm64: defconfig: Add Juno SATA controller
arm64: defconfig: enable freescale/nxp config options
arm64: defconfig: enable 48-bit virtual addresses
arm64: defconfig: cleanup the defconfig
MAINTAINERS: update entry for Marvell ARM platform maintainers
arm64: marvell: enable AP806 and CP110 syscon driver
arm64: Kconfig: select sp804 timer for ARCH_HISI
arm64: defconfig: enable configs for WLAN and TI WL1835 as modules
arm64: defconfig: enable several common USB network adapters
arm64: defconfig: add CONFIG_SPI_SPIDEV as module
arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKey
arm64: defconfig: Add Renesas R-Car USB 3.0 driver support
MAINTAINERS: add Chanho Min as ARM/LG1K maintainer
arm64: defconfig: enable ARCH_LG1K
arm64: add Kconfig entry for LG1K SoC family
arm64: defconfig: Enable PL330 DMA controller
arm64: defconfig: enable basic boot for Amlogic meson
- update arm64 defconfig with options useful for Armada 7K/8K support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlcx85oACgkQCwYYjhRyO9VvdACfZUGxgpLlq3bpu0TymeLZfbfn
4qYAmwT6iwH3Vnu/mYeXRUP81EsBUNyk
=hgwZ
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig64-4.7-1' of git://git.infradead.org/linux-mvebu into next/arm64
Merge "mvebu defconfig for arm64 for 4.7" from Gregory CLEMENT:
- update arm64 defconfig with options useful for Armada 7K/8K support
* tag 'mvebu-defconfig64-4.7-1' of git://git.infradead.org/linux-mvebu:
arm64: configs: add options useful for Armada 7K/8K support
This commit updates the ARM64 defconfig to include additional options
useful to support the Armada 7K/8K platforms:
- the SPI controller driver, spi-orion
- the support for SPI flashes
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
