Commit Graph

3248 Commits

Author SHA1 Message Date
Michael Holzheu
1592a8e456 s390/kdump: fix nosmt kernel parameter
It turned out that SIGP set-multi-threading can only be done once.
Therefore switching to a different MT level after switching to
sclp.mtid_prev in the dump case fails.

As a symptom specifying the "nosmt" parameter currently fails for
the kdump kernel and the kernel starts with multi-threading enabled.

So fix this and issue diag 308 subcode 1 call after collecting the
CPU states for the dump. Also enhance the diag308_reset() function to
be usable also with enabled lowcore protection and prefix register != 0.
After the reset it is possible to switch the MT level again. We have
to do the reset very early in order not to kill the already initialized
console. Therefore instead of kmalloc() the corresponding memblock
functions have to be used. To avoid copying the sclp cpu code into
sclp_early, we now use the simple sigp loop method for CPU detection.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-25 09:39:26 +02:00
Martin Schwidefsky
d08d94306e s390/smp: cleanup core vs. cpu in the SCLP interface
The SCLP interface to query, configure and deconfigure CPUs actually
operates on cores. For a machine without the multi-threading faciltiy
a CPU and a core are equivalent but starting with System z13 a core
can have multiple hardware threads, also referred to as logical CPUs.

To avoid confusion replace the word 'cpu' with 'core' in the SCLP
interface. Also replace MAX_CPU_ADDRESS with SCLP_MAX_CORES.
The core-id is an 8-bit field, the maximum thread id is in the range
0-31. The theoretical limit for the CPU address is therefore 8191.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-25 09:39:24 +02:00
Ingo Tuchscherer
c50a160c17 s390/zcrypt: Fixed reset and interrupt handling of AP queues
In case of request timeouts an AP queue reset will be triggered to
recover and reinitialize the AP queue. The previous behavior was an
immediate reset execution regardless of current/pending requests.
Due to newly changed firmware behavior the reset may be delayed, based
on the priority of pending request. The device driver's waiting time
frame was limited, hence it did not received the reset response. As a
consequence interrupts would not be enabled afterwards.

The RAPQ (queue reset) and AQIC (interrupt control) commands will be
treated fully asynchronous now. The device driver will check the reset and
interrupt states periodically, thus it can handle the reinitialization
properly.

Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-25 09:39:23 +02:00
Linus Torvalds
e0456717e4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add TX fast path in mac80211, from Johannes Berg.

 2) Add TSO/GRO support to ibmveth, from Thomas Falcon

 3) Move away from cached routes in ipv6, just like ipv4, from Martin
    KaFai Lau.

 4) Lots of new rhashtable tests, from Thomas Graf.

 5) Run ingress qdisc lockless, from Alexei Starovoitov.

 6) Allow servers to fetch TCP packet headers for SYN packets of new
    connections, for fingerprinting.  From Eric Dumazet.

 7) Add mode parameter to pktgen, for testing receive.  From Alexei
    Starovoitov.

 8) Cache access optimizations via simplifications of build_skb(), from
    Alexander Duyck.

 9) Move page frag allocator under mm/, also from Alexander.

10) Add xmit_more support to hv_netvsc, from KY Srinivasan.

11) Add a counter guard in case we try to perform endless reclassify
    loops in the packet scheduler.

12) Extern flow dissector to be programmable and use it in new "Flower"
    classifier.  From Jiri Pirko.

13) AF_PACKET fanout rollover fixes, performance improvements, and new
    statistics.  From Willem de Bruijn.

14) Add netdev driver for GENEVE tunnels, from John W Linville.

15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso.

16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet.

17) Add an ECN retry fallback for the initial TCP handshake, from Daniel
    Borkmann.

18) Add tail call support to BPF, from Alexei Starovoitov.

19) Add several pktgen helper scripts, from Jesper Dangaard Brouer.

20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa.

21) Favor even port numbers for allocation to connect() requests, and
    odd port numbers for bind(0), in an effort to help avoid
    ip_local_port_range exhaustion.  From Eric Dumazet.

22) Add Cavium ThunderX driver, from Sunil Goutham.

23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata,
    from Alexei Starovoitov.

24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai.

25) Double TCP Small Queues default to 256K to accomodate situations
    like the XEN driver and wireless aggregation.  From Wei Liu.

26) Add more entropy inputs to flow dissector, from Tom Herbert.

27) Add CDG congestion control algorithm to TCP, from Kenneth Klette
    Jonassen.

28) Convert ipset over to RCU locking, from Jozsef Kadlecsik.

29) Track and act upon link status of ipv4 route nexthops, from Andy
    Gospodarek.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits)
  bridge: vlan: flush the dynamically learned entries on port vlan delete
  bridge: multicast: add a comment to br_port_state_selection about blocking state
  net: inet_diag: export IPV6_V6ONLY sockopt
  stmmac: troubleshoot unexpected bits in des0 & des1
  net: ipv4 sysctl option to ignore routes when nexthop link is down
  net: track link-status of ipv4 nexthops
  net: switchdev: ignore unsupported bridge flags
  net: Cavium: Fix MAC address setting in shutdown state
  drivers: net: xgene: fix for ACPI support without ACPI
  ip: report the original address of ICMP messages
  net/mlx5e: Prefetch skb data on RX
  net/mlx5e: Pop cq outside mlx5e_get_cqe
  net/mlx5e: Remove mlx5e_cq.sqrq back-pointer
  net/mlx5e: Remove extra spaces
  net/mlx5e: Avoid TX CQE generation if more xmit packets expected
  net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion
  net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()
  net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them
  net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues
  net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device
  ...
2015-06-24 16:49:49 -07:00
Linus Torvalds
4b1f2af675 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "Pretty boring for a merge window pull.

  One change in behaviour is the patch for dasd driver, the module which
  provides the diagnose discipline is now loaded automatically.

  The SCLP code got a nice cleanup, a new global structure replaces a
  bunch of accessor functions.

  And a couple of random, small improvements"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: improve handling of hotplug event 0x301
  s390/setup: fix DMA_API_DEBUG warnings
  s390/zcrypt: remove obsolete __constant
  s390/keyboard: avoid off-by-one when using strnlen_user()
  s390/sclp: pass timeout as HZ independent value
  s390/mm: s/specifiation/specification/, s/an specification/a specification/
  s390/sclp: Use DECLARE_BITMAP
  s390/dasd: Enable automatic loading of dasd_diag_mod
  s390/sclp: move sclp_facilities into "struct sclp"
  s390/sclp: get rid of sclp_get_mtid() and sclp_get_mtid_max()
  s390/sclp: unify basic sclp access by exposing "struct sclp"
  s390/sclp: prepare smp_fill_possible_mask for global "struct sclp"
2015-06-24 08:45:27 -07:00
Linus Torvalds
acd53127c4 SCSI misc on 20150622
This is the usual grab bag of driver updates (lpfc, hpsa,
 megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates.
 There are also one new driver: the Cisco snic; the advansys driver has
 been rewritten to get rid of the warning about converting it to the
 DMA API, the tape statistics patch got in and finally, there's a
 resuffle of SCSI header files to separate more cleanly initiator from
 target mode (and better share the common definitions).
 
 Signed-off-by: James Bottomley <JBottomley@Odin.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJViKWdAAoJEDeqqVYsXL0MAr8IAMmlA6HBVjMJJFCEOY9corHj
 e70MNQa7LUgf+JCdOtzGcvHXTiFFd4IHZAwXUJAnsC4IU2QWEfi1bjUTErlqBIGk
 LoZlXXpEHnFpmWot3OluOzzcGcxede8rVgPiKWVVdojIngBC2+LL/i2vPCJ84ri9
 WCVlk6KBvWZXuU6JuOKAb2FO9HOX7Q61wuKAMast2Qc6RNc2ksgc7VbstsITqzZ9
 FVEsjmQ5lqUj+xdxBpiUOdUpc22IJ4VcpBgQ2HrThvg6vf4aq937RJ/g4vi/g0SU
 Utk0a3bUw1H/WnYAfJVFx83nVEsS/954Z7/ERDg1sjlfLYwQtQnpov0XIbPIbZU=
 =k9IT
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is the usual grab bag of driver updates (lpfc, hpsa,
  megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates.

  There is also one new driver: the Cisco snic.  The advansys driver has
  been rewritten to get rid of the warning about converting it to the
  DMA API, the tape statistics patch got in and finally, there's a
  resuffle of SCSI header files to separate more cleanly initiator from
  target mode (and better share the common definitions)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (156 commits)
  snic: driver for Cisco SCSI HBA
  qla2xxx: Fix indentation
  qla2xxx: Comment out unreachable code
  fusion: remove dead MTRR code
  advansys: fix compilation errors and warnings when CONFIG_PCI is not set
  mptsas: fix depth param in scsi_track_queue_full
  megaraid: fix irq setup process regression
  lpfc: Update version to 10.7.0.0 for upstream patch set.
  lpfc: Fix to drop PLOGIs from fabric node till LOGO processing completes
  lpfc: Fix scsi task management error message.
  lpfc: Fix cq_id masking problem.
  lpfc: Fix scsi prep dma buf error.
  lpfc: Add support for using block multi-queue
  lpfc: Devices are not discovered during takeaway/giveback testing
  lpfc: Fix vport deletion failure.
  lpfc: Check for active portpeerbeacon.
  lpfc: Update driver version for upstream patch set 10.6.0.1.
  lpfc: Change buffer pool empty message to miscellaneous category
  lpfc: Fix incorrect log message reported for empty FCF record.
  lpfc: Fix rport leak.
  ...
2015-06-23 15:55:44 -07:00
Vaishali Thakkar
d9a5c0c65b s390/zcrypt: remove obsolete __constant
__constant_cpu_to_le16 converted to cpu_to_le16

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-18 15:45:30 +02:00
Jan Kara
8cb81811e9 s390/keyboard: avoid off-by-one when using strnlen_user()
strnlen_user() returns the length of the string including terminating 0.
So avoid counting it again and unnecessarily reducing maximum string
size by 1.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-15 10:51:12 +02:00
Nicholas Mc Guire
2e4aa2f2bd s390/sclp: pass timeout as HZ independent value
schedule_timeout takes a timeout in jiffies but the code currently is
passing in a constant SDIAS_SLEEP_TICKS, as this is otherwise unused
it is replaced by 500ms as recommended by Michael Holzheu
<holzheu@linux.vnet.ibm.com> and converted with msecs_to_jiffies();
As SDIAS_SLEEP_TICKS was only used in this one location it is dropped.

Patch was compile tested with (s390) defconfig +
CONFIG_MARCH_Z10=y, (implies CONFIG_CRASH_DUMP=y)

Patch is against 4.1-rc5 (localversion-next is -next-20150529)

Link: http://lkml.org/lkml/2015/5/29/235
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-15 10:50:57 +02:00
Joe Perches
b8a43b045e s390/sclp: Use DECLARE_BITMAP
Use the generic mechanism to declare a bitmap instead of unsigned long.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-15 10:50:33 +02:00
Hannes Reinecke
b84b1d522f scsi: Do not set cmd_per_lun to 1 in the host template
'0' is now used as the default cmd_per_lun value,
so there's no need to explicitly set it to '1' in the
host template.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-31 18:06:28 -07:00
David S. Miller
36583eb54d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/cadence/macb.c
	drivers/net/phy/phy.c
	include/linux/skbuff.h
	net/ipv4/tcp.c
	net/switchdev/switchdev.c

Switchdev was a case of RTNH_H_{EXTERNAL --> OFFLOAD}
renaming overlapping with net-next changes of various
sorts.

phy.c was a case of two changes, one adding a local
variable to a function whilst the second was removing
one.

tcp.c overlapped a deadlock fix with the addition of new tcp_info
statistic values.

macb.c involved the addition of two zyncq device entries.

skbuff.h involved adding back ipv4_daddr to nf_bridge_info
whilst net-next changes put two other existing members of
that struct into a union.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23 01:22:35 -04:00
Jarod Wilson
a05e578055 s390/block/dasd: remove obsolete while -EBUSY loop
With the mutex_trylock bit gone from blkdev_reread_part(), the retry logic
in dasd_scan_partitions() shouldn't be necessary.

CC: Christoph Hellwig <hch@infradead.org>
CC: Jens Axboe <axboe@kernel.dk>
CC: Tejun Heo <tj@kernel.org>
CC: Alexander Viro <viro@zeniv.linux.org.uk>
CC: Markus Pargmann <mpa@pengutronix.de>
CC: Stefan Weinhuber <wein@de.ibm.com>
CC: Stefan Haberland <stefan.haberland@de.ibm.com>
CC: Sebastian Ott <sebott@linux.vnet.ibm.com>
CC: Fabian Frederick <fabf@skynet.be>
CC: Ming Lei <ming.lei@canonical.com>
CC: David Herrmann <dh.herrmann@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: nbd-general@lists.sourceforge.net
CC: linux-s390@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-20 09:06:17 -06:00
Ming Lei
6029a06c88 block: dasd_genhd: convert to blkdev_reread_part
Also remove the obsolete comment.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-20 09:06:15 -06:00
Peter Oberparleiter
89a2a8e76b s390/lcs: Fix null-pointer access in msg
An attempt to configure a CTC device as LCS results in the
following error message:

  (null): Detecting a network adapter for LCS devices failed
          with rc=-5 (0xfffffffb)

"(null)" results from access to &card->dev->dev in lcs_new_device()
which is only initialized later in the function. Fix this by using
&ccwgdev->dev instead which is initialized before lcs_new_device()
is called.

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18 12:14:18 -04:00
Eugene Crosser
ffb9525141 qeth: replace ENOSYS with EOPNOTSUPP
Since recently, `checkpatch.pl` advices that ENOSYS should not be
used for anything other than "invalid syscall nr". This patch
replaces ENOSYS return code with EOPNOTSUPP for the "unsupported
function" conditions.

Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18 12:14:17 -04:00
Eugene Crosser
ff1d929110 qeth: BRIDGEPORT "sanity check"
Forbid enabling IFF_PROMISC reflection to BRIDGEPORT when a role
is already assigned, and forbid direct manipulation of the role
when reflection mode is engaged.

Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18 12:14:17 -04:00
Eugene Crosser
9c23f4dab1 qeth: OSA version of SETBRIDGEPORT command
OSA Ethernet hardware is introducing BRIDGEPORT functionality
similar (but not identical) to HiperSockets BRIDGEPORT. This
patch makes HiperSockets BRIDGEPORT related sysfs attributes
and udev events work with OSA hardware too.

Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18 12:14:17 -04:00
Eugene Crosser
0db587b065 qeth: IFF_PROMISC flag to BRIDGE PORT mode
OSA and HiperSocket devices do not support promiscuous mode proper,
but they support "BRIDGE PORT" mode that is functionally similar.
This update introduces sysfs attribute that, when set, makes the driver
try to "reflect" setting and resetting of the IFF_PROMISC flag on the
interface into setting and resetting PRIMARY or SECONDARY bridge port
role on the underlying OSA or HiperSocket device.

Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18 12:14:17 -04:00
Eugene Crosser
d3c29a5c3f qeth: remove locks from sysfs _show
Locking is probably unnecessary in this case, and the rest of the
qeth sysfs code does not use locks in the *_show() functions.
Remove locks from the layer2 *_show() functions in which they where
accidentally introduced.

Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18 12:14:17 -04:00
Eugene Crosser
c88394e7ee qeth: fix handling of IPA return codes
Function that executes IPA commands returns the result code from the
IPA response block. If non-negative, it needs to be transformed into
errno-compatible code before returning to the caller.

Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18 12:14:17 -04:00
Thomas Richter
c7258d8637 qeth: fix rx checksum offload handling
ethtool is used to change some device driver features
such as RX/TX hardware checksum offloading.
The qeth device driver callback function to
turn on/off RX hardware check sum handling never changes
the hardware configuration.
The NETIF_F_RXCSUM bit is cleared when the feature bitset
type netdev_features_t(64bit) is assigned to 32 a bit
variable.

This patch fixes the NETIF_F_RXCSUM handling.
Also there is no need to manipulate the device's features
bit set as this is done by the caller when no error occurs.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18 12:14:16 -04:00
Peter Oberparleiter
7c53fcb39f s390/dasd: Enable automatic loading of dasd_diag_mod
Enabling a DASD that was configured to use the DIAG250 access method
while the corresponding kernel module dasd_diag_mod has not been loaded
fails with an error message. To fix this, users need to manually load
the dasd_diag_mod module.

This procedure can be simplified by automatically loading the
dasd_diag_mod from within the kernel when a DASD configured for DIAG250
is set online.

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-13 09:58:19 +02:00
David Hildenbrand
78335a30e0 s390/sclp: move sclp_facilities into "struct sclp"
Let's also move the facilities into the sclp struct, so we can avoid
another separate external variable.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-13 09:58:18 +02:00
David Hildenbrand
3a9f3fe69e s390/sclp: get rid of sclp_get_mtid() and sclp_get_mtid_max()
As all relevant sclp data is now directly accessible, let's move the
logic of these two functions to the single caller.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-13 09:58:17 +02:00
David Hildenbrand
37c5f6c86c s390/sclp: unify basic sclp access by exposing "struct sclp"
Let's unify basic access to sclp fields by storing the data in an external
struct in asm/sclp.h.

The values can now directly be accessed by other components, so there is
no need for most accessor functions and external variables anymore.

The mtid, mtid_max and facility part will be cleaned up separately.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-13 09:58:17 +02:00
Ingo Tuchscherer
f60b8d449d s390/zcrypt: Fix invalid domain handling during ap module unload
Added domain checking to prevent reset failures caused by invalid
domains.
Corrected removal sequence of bus attributes and device.

Reviewed-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-13 09:57:29 +02:00
Ingo Tuchscherer
8cc2af7c53 s390/zcrypt: fixed ap poll timer behavior
The ap poll timer restart condition was wrong. Hence the poll timer
was not restarted reliable when setting a new time interval via the
poll_timeout sysfs attribute.
Added missing timer locking.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-30 13:50:35 +02:00
Christophe Jaillet
0a7c501e67 s390/3215: free memory in error path
If one memory allocation fails, there is a memory leak.

Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-23 16:55:50 +02:00
Linus Torvalds
b9bb6fb73b Some virtio internal cleanups, a new virtio device "virtio input", and
a change to allow the legacy virtio balloon.
 
 Most excitingly, some lguest work!  No seriously, I got some cleanup
 patches.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVN1SjAAoJENkgDmzRrbjxeDoP+wZnZdG4cHNc6ifiNPkSed9m
 cKWV7L6uTxczdFKcTNpDShn2MW0XqbcHc+VdBH9Exl3+cyick6fuhpi6SjLby0g6
 a40RldysRMAc/K/dK40dG4qtSUT1uwDrOYNonMDjx1RAikO3DoTGUm4YgYZKSlM/
 pKuCbAebM3dZ6EUVnaJICHWkJvY7Bk9JwGL6Z8RhF7lunVAGqIMHH9GklqSCyNiY
 LK+05hNXHv/OOIAkEO+ZmDrWSagogggGXEdRFom9s87xmu9GVse7Fzfq9pZ5nQre
 gickgBeC+gN8das1wvhlTp22F8XJslC0IRJhvbwLMQUd16hrH1YUIdvsqry/Qxds
 04GgzLTVA/Z5VVEVm9MXcKWGwcsnUBu9EChsdEKZwNgBz9UF2gs39My8Co6AZ7U/
 Ajcpksl22RXaR7OB65vRPIk23mh/NchGSzVGFbppzCwj2SkO9ONSFrDj3mAzfbhR
 9NHi32Xm0+LdN444WCo1NzahKLAX5bYCv2ZSDs5JEBDQzmW2FWKO2ZaVJ84jpG6O
 O4XppI/X8cP+dxTs8xH91qh9GGmq9Aa41iuekZh/jG/8fLFT45rhlzLJfwh2B9rI
 djcaFFLFt+in5R6kgugM9dbCNALneXgGDnzlmqy5RwOrrCTwhyGn6DMwDqRz7EHn
 gsbiiv6eSsrgX4mLHP2n
 =Wj06
 -----END PGP SIGNATURE-----

Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull virtio updates from Rusty Russell:
 "Some virtio internal cleanups, a new virtio device "virtio input", and
  a change to allow the legacy virtio balloon.

  Most excitingly, some lguest work! No seriously, I got some cleanup
  patches"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio: drop virtio_device_is_legacy_only
  virtio_pci: support non-legacy balloon devices
  virtio_mmio: support non-legacy balloon devices
  virtio_ccw: support non-legacy balloon devices
  virtio: balloon might not be a legacy device
  virtio_balloon: transitional interface
  virtio_ring: Update weak barriers to use dma_wmb/rmb
  virtio_pci_modern: switch to type-safe io accessors
  virtio_pci_modern: type-safe io accessors
  lguest: handle traps on the "interrupt suppressed" iret instruction.
  virtio: drop a useless config read
  virtio_config: reorder functions
  Add virtio-input driver.
  lguest: suppress interrupts for single insn, not range.
  lguest: simplify lguest_iret
  lguest: rename i386_head.S in the comments
  lguest: explicitly set miscdevice's private_data NULL
  lguest: fix pending interrupt test.
2015-04-22 10:55:06 -07:00
Linus Torvalds
b19a42e3cb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Martin Schwidefsky:
 "The big thing in this second merge for s390 is the new eBPF JIT from
  Michael which replaces the old 32-bit backend.

  The remaining commits are bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: add locking for fmb access
  s390/pci: extract software counters from fmb
  s390/dasd: Fix unresumed device after suspend/resume having no paths
  s390/dasd: fix unresumed device after suspend/resume
  s390/dasd: fix inability to set a DASD device offline
  s390/mm: Fix memory hotplug for unaligned standby memory
  s390/bpf: Add s390x eBPF JIT compiler backend
  s390: Use bool function return values of true/false not 1/0
2015-04-20 10:15:33 -07:00
Joe Perches
c2f0b61d89 s390: remove use of seq_printf return value
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:25 -07:00
Linus Torvalds
6c373ca893 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add BQL support to via-rhine, from Tino Reichardt.

 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
    can support hw switch offloading.  From Floria Fainelli.

 3) Allow 'ip address' commands to initiate multicast group join/leave,
    from Madhu Challa.

 4) Many ipv4 FIB lookup optimizations from Alexander Duyck.

 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
    Borkmann.

 6) Remove the ugly compat support in ARP for ugly layers like ax25,
    rose, etc.  And use this to clean up the neigh layer, then use it to
    implement MPLS support.  All from Eric Biederman.

 7) Support L3 forwarding offloading in switches, from Scott Feldman.

 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
    up route lookups even further.  From Alexander Duyck.

 9) Many improvements and bug fixes to the rhashtable implementation,
    from Herbert Xu and Thomas Graf.  In particular, in the case where
    an rhashtable user bulk adds a large number of items into an empty
    table, we expand the table much more sanely.

10) Don't make the tcp_metrics hash table per-namespace, from Eric
    Biederman.

11) Extend EBPF to access SKB fields, from Alexei Starovoitov.

12) Split out new connection request sockets so that they can be
    established in the main hash table.  Much less false sharing since
    hash lookups go direct to the request sockets instead of having to
    go first to the listener then to the request socks hashed
    underneath.  From Eric Dumazet.

13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.

14) Support stable privacy address generation for RFC7217 in IPV6.  From
    Hannes Frederic Sowa.

15) Hash network namespace into IP frag IDs, also from Hannes Frederic
    Sowa.

16) Convert PTP get/set methods to use 64-bit time, from Richard
    Cochran.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
  fm10k: Bump driver version to 0.15.2
  fm10k: corrected VF multicast update
  fm10k: mbx_update_max_size does not drop all oversized messages
  fm10k: reset head instead of calling update_max_size
  fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
  fm10k: update xcast mode before synchronizing multicast addresses
  fm10k: start service timer on probe
  fm10k: fix function header comment
  fm10k: comment next_vf_mbx flow
  fm10k: don't handle mailbox events in iov_event path and always process mailbox
  fm10k: use separate workqueue for fm10k driver
  fm10k: Set PF queues to unlimited bandwidth during virtualization
  fm10k: expose tx_timeout_count as an ethtool stat
  fm10k: only increment tx_timeout_count in Tx hang path
  fm10k: remove extraneous "Reset interface" message
  fm10k: separate PF only stats so that VF does not display them
  fm10k: use hw->mac.max_queues for stats
  fm10k: only show actual queues, not the maximum in hardware
  fm10k: allow creation of VLAN on default vid
  fm10k: fix unused warnings
  ...
2015-04-15 09:00:47 -07:00
Stefan Haberland
df3044f1ef s390/dasd: Fix unresumed device after suspend/resume having no paths
The DASD device driver prevents I/O from being started on stopped
devices. This also prevented channel paths to be verified and so
the device was unable to be resumed.
Fix by allowing path verification requests on stopped devices.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-15 12:23:51 +02:00
Stefan Haberland
a3147a7bc2 s390/dasd: fix unresumed device after suspend/resume
The DASD device driver only has a limited amount of memory to build
I/O requests.
This memory was used by blocklayer requests leading to an inability
to build needed internal requests to resume the device.
Fix by preventing the DASD driver to fetch requests for a stopped
device.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Reference-ID: RQM 2520
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-15 12:23:51 +02:00
Stefan Haberland
f2608cd4a3 s390/dasd: fix inability to set a DASD device offline
Fix ref counting for DASD devices leading to an inability to set a
DASD device offline.
Before a worker is scheduled the DASD device driver takes a reference
to the device. If the worker was already scheduled this reference was
never freed.
Fix by giving the reference to the DASD device free when
schedule_work() returns false.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-15 12:23:50 +02:00
Michael Holzheu
8741ce6d11 s390/mm: Fix memory hotplug for unaligned standby memory
Commit 27356f54c8 ("mm/hotplug: verify hotplug memory range")
introduced a check that makes add_memory() only accept section size
aligned memory.

Therefore on z/VM systems, where standby memory is not aligned, no
standby memory is registered at all.

Example:

 #cp def store 3504M standby 2336M
 00: CP Q V STORE
 00: STORAGE = 3504M MAX = 6G INC = 8M STANDBY = 2336M RESERVED = 0

For this setup the following error message is printed:

 Section-unaligned hotplug range: start 0xdb000000, size 0x92000000

So fix this and register aligned memory in "sclp_cmd.c". This means
that for the corner cases where the standby memory is not aligned we
loose some memory.

In order to inform the user about the potential loss of standby memory,
we add a new message for each added standby block and print how
much of the standby memory is usable, for example:

 sclp_cmd.4336b4: Standby memory at 0x50000000 (256M of 256M usable)
 sclp_cmd.4336b4: Standby memory at 0xb0000000 (256M of 256M usable)
 sclp_cmd.4336b4: Standby memory at 0xdb000000 (2048M of 2336M usable)

We also ensure that a potential memory block that contains both "assigned"
and "standby" memory cannot be setup offline.

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-15 12:23:49 +02:00
Linus Torvalds
bdfa54dfd9 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "The major change in this merge is the removal of the support for
  31-bit kernels.  Naturally 31-bit user space will continue to work via
  the compat layer.

  And then some cleanup, some improvements and bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits)
  s390/smp: wait until secondaries are active & online
  s390/hibernate: fix save and restore of kernel text section
  s390/cacheinfo: add missing facility check
  s390/syscalls: simplify syscall_get_arch()
  s390/irq: enforce correct irqclass_sub_desc array size
  s390: remove "64" suffix from mem64.S and swsusp_asm64.S
  s390/ipl: cleanup macro usage
  s390/ipl: cleanup shutdown_action attributes
  s390/ipl: cleanup bin attr usage
  s390/uprobes: fix address space annotation
  s390: add missing arch_release_task_struct() declaration
  s390: make couple of functions and variables static
  s390/maccess: improve s390_kernel_write()
  s390/maccess: remove potentially broken probe_kernel_write()
  s390/watchdog: support for KVM hypervisors and delete pr_info messages
  s390/watchdog: enable KEEPALIVE for /dev/watchdog
  s390/dasd: remove setting of scheduler from driver
  s390/traps: panic() instead of die() on translation exception
  s390: remove test_facility(2) (== z/Architecture mode active) checks
  s390/cmpxchg: simplify cmpxchg_double
  ...
2015-04-14 20:51:44 -07:00
Michael S. Tsirkin
2003a7a5b6 virtio_ccw: support non-legacy balloon devices
As of last patch, virtio_device_is_legacy_only is always false,
drop the test from virtio ccw.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (slight reword)
2015-04-15 12:41:11 +09:30
David Rientjes
11d8336045 mm, mempool: do not allow atomic resizing
Allocating a large number of elements in atomic context could quickly
deplete memory reserves, so just disallow atomic resizing entirely.

Nothing currently uses mempool_resize() with anything other than
GFP_KERNEL, so convert existing callers to drop the gfp_mask.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Steffen Maier <maier@linux.vnet.ibm.com>	[zfcp]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 16:49:06 -07:00
Stefan Haberland
a5fd8ddce2 s390/dasd: remove setting of scheduler from driver
Remove the hard coded scheduler for the DASD device driver to enable
change of the scheduler during runtime. Set recommended deadline
scheduler via additional udev rule.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-25 11:49:40 +01:00
Heiko Carstens
86cd741bc6 s390: remove test_facility(2) (== z/Architecture mode active) checks
Given that the kernel now always runs in 64 bit mode, it is
pointless to check if the z/Architecture mode is active.
Remove the checks.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-25 11:49:37 +01:00
Heiko Carstens
5a79859ae0 s390: remove 31 bit support
Remove the 31 bit support in order to reduce maintenance cost and
effectively remove dead code. Since a couple of years there is no
distribution left that comes with a 31 bit kernel.

The 31 bit kernel also has been broken since more than a year before
anybody noticed. In addition I added a removal warning to the kernel
shown at ipl for 5 minutes: a960062e58 ("s390: add 31 bit warning
message") which let everybody know about the plan to remove 31 bit
code. We didn't get any response.

Given that the last 31 bit only machine was introduced in 1999 let's
remove the code.
Anybody with 31 bit user space code can still use the compat mode.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-25 11:49:33 +01:00
David S. Miller
3cef5c5b0b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/cadence/macb.c

Overlapping changes in macb driver, mostly fixes and cleanups
in 'net' overlapping with the integration of at91_ether into
macb in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09 23:38:02 -04:00
Stefan Raspl
ca5b20ace8 qeth: Fix command sizes
This patch adjusts two instances where we were using the (too big)
struct qeth_ipacmd_setadpparms size instead of the commands' actual
size. This didn't do any harm, but wasted a few bytes.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28 23:38:29 -05:00
Ursula Braun
83650a2edc s390: remove claw driver
claw devices are outdated and no longer supported.
This patch removes the claw driver.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28 23:38:29 -05:00
Ameen Ali
3a9f9183bd s390/dcss: array index 'i' is used before limits check.
Avoid out-of-bounds-read by checking count before indexing.

Signed-off-by : Ameen Ali <Ameenali023@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:48 +01:00
Sebastian Ott
a13ccb04af s390/scm_block: fix off by one during cluster reservation
We increase the msb_count after we're finished building the request.
That way we can always access the current request via
scmrq->request[msb_count] . But once the request is started we need
to make sure that the array index stays below msb_count.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:47 +01:00
Linus Torvalds
b9085bcbf5 Fairly small update, but there are some interesting new features.
Common: Optional support for adding a small amount of polling on each HLT
 instruction executed in the guest (or equivalent for other architectures).
 This can improve latency up to 50% on some scenarios (e.g. O_DSYNC writes
 or TCP_RR netperf tests).  This also has to be enabled manually for now,
 but the plan is to auto-tune this in the future.
 
 ARM/ARM64: the highlights are support for GICv3 emulation and dirty page
 tracking
 
 s390: several optimizations and bugfixes.  Also a first: a feature
 exposed by KVM (UUID and long guest name in /proc/sysinfo) before
 it is available in IBM's hypervisor! :)
 
 MIPS: Bugfixes.
 
 x86: Support for PML (page modification logging, a new feature in
 Broadwell Xeons that speeds up dirty page tracking), nested virtualization
 improvements (nested APICv---a nice optimization), usual round of emulation
 fixes.  There is also a new option to reduce latency of the TSC deadline
 timer in the guest; this needs to be tuned manually.
 
 Some commits are common between this pull and Catalin's; I see you
 have already included his tree.
 
 ARM has other conflicts where functions are added in the same place
 by 3.19-rc and 3.20 patches.  These are not large though, and entirely
 within KVM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJU28rkAAoJEL/70l94x66DXqQH/1TDOfJIjW7P2kb0Sw7Fy1wi
 cEX1KO/VFxAqc8R0E/0Wb55CXyPjQJM6xBXuFr5cUDaIjQ8ULSktL4pEwXyyv/s5
 DBDkN65mriry2w5VuEaRLVcuX9Wy+tqLQXWNkEySfyb4uhZChWWHvKEcgw5SqCyg
 NlpeHurYESIoNyov3jWqvBjr4OmaQENyv7t2c6q5ErIgG02V+iCux5QGbphM2IC9
 LFtPKxoqhfeB2xFxTOIt8HJiXrZNwflsTejIlCl/NSEiDVLLxxHCxK2tWK/tUXMn
 JfLD9ytXBWtNMwInvtFm4fPmDouv2VDyR0xnK2db+/axsJZnbxqjGu1um4Dqbak=
 =7gdx
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM update from Paolo Bonzini:
 "Fairly small update, but there are some interesting new features.

  Common:
     Optional support for adding a small amount of polling on each HLT
     instruction executed in the guest (or equivalent for other
     architectures).  This can improve latency up to 50% on some
     scenarios (e.g. O_DSYNC writes or TCP_RR netperf tests).  This
     also has to be enabled manually for now, but the plan is to
     auto-tune this in the future.

  ARM/ARM64:
     The highlights are support for GICv3 emulation and dirty page
     tracking

  s390:
     Several optimizations and bugfixes.  Also a first: a feature
     exposed by KVM (UUID and long guest name in /proc/sysinfo) before
     it is available in IBM's hypervisor! :)

  MIPS:
     Bugfixes.

  x86:
     Support for PML (page modification logging, a new feature in
     Broadwell Xeons that speeds up dirty page tracking), nested
     virtualization improvements (nested APICv---a nice optimization),
     usual round of emulation fixes.

     There is also a new option to reduce latency of the TSC deadline
     timer in the guest; this needs to be tuned manually.

     Some commits are common between this pull and Catalin's; I see you
     have already included his tree.

  Powerpc:
     Nothing yet.

     The KVM/PPC changes will come in through the PPC maintainers,
     because I haven't received them yet and I might end up being
     offline for some part of next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (130 commits)
  KVM: ia64: drop kvm.h from installed user headers
  KVM: x86: fix build with !CONFIG_SMP
  KVM: x86: emulate: correct page fault error code for NoWrite instructions
  KVM: Disable compat ioctl for s390
  KVM: s390: add cpu model support
  KVM: s390: use facilities and cpu_id per KVM
  KVM: s390/CPACF: Choose crypto control block format
  s390/kernel: Update /proc/sysinfo file with Extended Name and UUID
  KVM: s390: reenable LPP facility
  KVM: s390: floating irqs: fix user triggerable endless loop
  kvm: add halt_poll_ns module parameter
  kvm: remove KVM_MMIO_SIZE
  KVM: MIPS: Don't leak FPU/DSP to guest
  KVM: MIPS: Disable HTW while in guest
  KVM: nVMX: Enable nested posted interrupt processing
  KVM: nVMX: Enable nested virtual interrupt delivery
  KVM: nVMX: Enable nested apic register virtualization
  KVM: nVMX: Make nested control MSRs per-cpu
  KVM: nVMX: Enable nested virtualize x2apic mode
  KVM: nVMX: Prepare for using hardware MSR bitmap
  ...
2015-02-13 09:55:09 -08:00
Linus Torvalds
3e12cefbe1 Merge branch 'for-3.20/core' of git://git.kernel.dk/linux-block
Pull core block IO changes from Jens Axboe:
 "This contains:

   - A series from Christoph that cleans up and refactors various parts
     of the REQ_BLOCK_PC handling.  Contributions in that series from
     Dongsu Park and Kent Overstreet as well.

   - CFQ:
        - A bug fix for cfq for realtime IO scheduling from Jeff Moyer.
        - A stable patch fixing a potential crash in CFQ in OOM
          situations.  From Konstantin Khlebnikov.

   - blk-mq:
        - Add support for tag allocation policies, from Shaohua. This is
          a prep patch enabling libata (and other SCSI parts) to use the
          blk-mq tagging, instead of rolling their own.
        - Various little tweaks from Keith and Mike, in preparation for
          DM blk-mq support.
        - Minor little fixes or tweaks from me.
        - A double free error fix from Tony Battersby.

   - The partition 4k issue fixes from Matthew and Boaz.

   - Add support for zero+unprovision for blkdev_issue_zeroout() from
     Martin"

* 'for-3.20/core' of git://git.kernel.dk/linux-block: (27 commits)
  block: remove unused function blk_bio_map_sg
  block: handle the null_mapped flag correctly in blk_rq_map_user_iov
  blk-mq: fix double-free in error path
  block: prevent request-to-request merging with gaps if not allowed
  blk-mq: make blk_mq_run_queues() static
  dm: fix multipath regression due to initializing wrong request
  cfq-iosched: handle failure of cfq group allocation
  block: Quiesce zeroout wrapper
  block: rewrite and split __bio_copy_iov()
  block: merge __bio_map_user_iov into bio_map_user_iov
  block: merge __bio_map_kern into bio_map_kern
  block: pass iov_iter to the BLOCK_PC mapping functions
  block: add a helper to free bio bounce buffer pages
  block: use blk_rq_map_user_iov to implement blk_rq_map_user
  block: simplify bio_map_kern
  block: mark blk-mq devices as stackable
  block: keep established cmd_flags when cloning into a blk-mq request
  block: add blk-mq support to blk_insert_cloned_request()
  block: require blk_rq_prep_clone() be given an initialized clone request
  blk-mq: add tag allocation policy
  ...
2015-02-12 14:13:23 -08:00
Linus Torvalds
b3d6524ff7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:

 - The remaining patches for the z13 machine support: kernel build
   option for z13, the cache synonym avoidance, SMT support,
   compare-and-delay for spinloops and the CES5S crypto adapater.

 - The ftrace support for function tracing with the gcc hotpatch option.
   This touches common code Makefiles, Steven is ok with the changes.

 - The hypfs file system gets an extension to access diagnose 0x0c data
   in user space for performance analysis for Linux running under z/VM.

 - The iucv hvc console gets wildcard spport for the user id filtering.

 - The cacheinfo code is converted to use the generic infrastructure.

 - Cleanup and bug fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits)
  s390/process: free vx save area when releasing tasks
  s390/hypfs: Eliminate hypfs interval
  s390/hypfs: Add diagnose 0c support
  s390/cacheinfo: don't use smp_processor_id() in preemptible context
  s390/zcrypt: fixed domain scanning problem (again)
  s390/smp: increase maximum value of NR_CPUS to 512
  s390/jump label: use different nop instruction
  s390/jump label: add sanity checks
  s390/mm: correct missing space when reporting user process faults
  s390/dasd: cleanup profiling
  s390/dasd: add locking for global_profile access
  s390/ftrace: hotpatch support for function tracing
  ftrace: let notrace function attribute disable hotpatching if necessary
  ftrace: allow architectures to specify ftrace compile options
  s390: reintroduce diag 44 calls for cpu_relax()
  s390/zcrypt: Add support for new crypto express (CEX5S) adapter.
  s390/zcrypt: Number of supported ap domains is not retrievable.
  s390/spinlock: add compare-and-delay to lock wait loops
  s390/tape: remove redundant if statement
  s390/hvc_iucv: add simple wildcard matches to the iucv allow filter
  ...
2015-02-11 17:42:32 -08:00
Ingo Tuchscherer
ea96f78813 s390/zcrypt: fixed domain scanning problem (again)
Older machines with more then 16 domains need a special check before
PQAP instructions can be processed. With commit 5bc334bff9 this
check was reverted by accident. This patch re-establishes the additional
code needed for checking the extended domains for older machines.

Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-04 09:03:19 +01:00
Sebastian Ott
6765cc2ac6 s390/dasd: cleanup profiling
The dasd driver has a lot of duplicated code to handle
dasd_global_profile. With this patch we use the same code for the
global and the per device profiling data. Note that dasd_stats_write
had to change slightly to maintain some odd differences between
A) per device and global profile and B) proc and sysfs interface
usage.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-29 09:19:29 +01:00
Sebastian Ott
8ea55c95c3 s390/dasd: add locking for global_profile access
Access to DASDs global statistics is done without locking which
can lead to inconsistent data. Add locking to fix this. Also move
the relevant structs in a global dasd_profile struct.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-29 09:19:27 +01:00
David S. Miller
95f873f2ff Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	arch/arm/boot/dts/imx6sx-sdb.dts
	net/sched/cls_bpf.c

Two simple sets of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27 16:59:56 -08:00
Thomas Richter
1aec42bcc0 390/qeth: Fix locking warning during qeth device setup
Do not wait for channel command buffers in IPA commands.
The potential wait could be done while holding a spin lock and causes
in recent kernels such a bug if kernel lock debugging is enabled:

kernel: BUG: sleeping function called from invalid context at drivers/s390/net/qeth_core_main.c:
794
kernel: in_atomic(): 1, irqs_disabled(): 0, pid: 2031, name: NetworkManager
kernel: 2 locks held by NetworkManager/2031:
kernel:  #0:  (rtnl_mutex){+.+.+.}, at: [<00000000006e0d7a>] rtnetlink_rcv+0x32/0x50
kernel:  #1:  (_xmit_ETHER){+.....}, at: [<00000000006cfe90>] dev_set_rx_mode+0x30/0x50
kernel: CPU: 0 PID: 2031 Comm: NetworkManager Not tainted 3.18.0-rc5-next-20141124 #1
kernel:        00000000275fb1f0 00000000275fb280 0000000000000002 0000000000000000
               00000000275fb320 00000000275fb298 00000000275fb298 00000000007e326a
               0000000000000000 000000000099ce2c 00000000009b4988 000000000000000b
               00000000275fb2e0 00000000275fb280 0000000000000000 0000000000000000
               0000000000000000 00000000001129c8 00000000275fb280 00000000275fb2e0
kernel: Call Trace:
kernel: ([<00000000001128b0>] show_trace+0xf8/0x158)
kernel:  [<000000000011297a>] show_stack+0x6a/0xe8
kernel:  [<00000000007e995a>] dump_stack+0x82/0xb0
kernel:  [<000000000017d668>] ___might_sleep+0x170/0x228
kernel:  [<000003ff80026f0e>] qeth_wait_for_buffer+0x36/0xd0 [qeth]
kernel:  [<000003ff80026fe2>] qeth_get_ipacmd_buffer+0x3a/0xc0 [qeth]
kernel:  [<000003ff80105078>] qeth_l3_send_setdelmc+0x58/0xf8 [qeth_l3]
kernel:  [<000003ff8010b1fe>] qeth_l3_set_ip_addr_list+0x2c6/0x848 [qeth_l3]
kernel:  [<000003ff8010bbb4>] qeth_l3_set_multicast_list+0x434/0xc48 [qeth_l3]
kernel:  [<00000000006cfe9a>] dev_set_rx_mode+0x3a/0x50
kernel:  [<00000000006cff90>] __dev_open+0xe0/0x140
kernel:  [<00000000006d02a0>] __dev_change_flags+0xa0/0x178
kernel:  [<00000000006d03a8>] dev_change_flags+0x30/0x70
kernel:  [<00000000006e14ee>] do_setlink+0x346/0x9a0
...

The device driver has plenty of command buffers available
per channel for channel command communication.
In the extremely rare case when there is no command buffer
available, return a NULL pointer and issue a warning
in the kernel log. The caller handles the case when
a NULL pointer is encountered and returns an error.

In the case the wait for command buffer is possible
(because no lock is held as in the OSN case), still wait
until a channel command buffer is available.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25 23:38:16 -08:00
Eugene Crosser
efbbc1d567 qeth: clean up error handling
In the functions that are registering and unregistering MAC
addresses in the qeth-handled hardware, remove callback functions
that are unnesessary, as only the return code is analyzed.
Translate hardware response codes to semi-standard 'errno'-like
codes for readability.

Add kernel-doc description to the internal API function
qeth_send_control_data().

Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Reviewed-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25 23:38:16 -08:00
Ingo Tuchscherer
bdea1f1bb2 s390/zcrypt: Add support for new crypto express (CEX5S) adapter.
Extends the generic cryptographic device driver (zcrypt)
to support the Crypto Express 5S adapter.

Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-23 15:17:14 +01:00
Ingo Tuchscherer
5bc334bff9 s390/zcrypt: Number of supported ap domains is not retrievable.
Upcoming versions of secure key management facilities (CCA and
EP11) require information about the maximum number of supported
ap domains in order to service TKE requests properly. With IBM
z13 the number of available domains (so far 16) has increased up
to 85. This number varies depending on machine types and models.
Therefore the new sysfs attribute 'ap_max_domain_id' provides
this limit of supported ap domains.  Upcoming releases for CCA
and EP11 will use this new information. Without this problem fix
it is not possible to retrieve reliable information about the
maximum number of supported ap domains. Thus, customers are not
able to perform key management for CCA and EP11 coprocessor
adapters.

Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-23 15:17:10 +01:00
David Hildenbrand
d614be05c8 s390/sclp: introduce check for the SIGP Interpretation Facility
This patch introduces the infrastructure to check whether the SIGP
Interpretation Facility is installed on all VCPUs in the configuration.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-23 13:25:35 +01:00
Martin Schwidefsky
55b5eb75e7 s390/tape: remove redundant if statement
The unit check handler for 3480 / 3490 tapes used to print a different
warning message for erpa code 0x57 dependent on the device type.
The warning messages have been remove in a cleanup, the if statement
is a left over. Remove it.

Reported-by: Fraser Brown <mlfbrown@stanford.edu>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-22 12:51:49 +01:00
Christophe Jaillet
2ec504934e s390/hmcdrv: free memory on error path
Free allocated page in case of error returned by hmcdrv_ftp_startup.

[heiko.carstens@de.ibm.com]: slightly changed Christophe's patch

Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-22 12:16:11 +01:00
Gerald Schaefer
5be6fdc090 dcssblk: issue warning when trying to save SN/EN type DCSS
The content of a DCSS of type SN or EN cannot be saved. Issue a warning when
trying to save such a DCSS. Depending on the setup, this may be a user error
or intended behaviour e.g. with a multi-DCSS device.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-22 12:16:04 +01:00
Martin Schwidefsky
10ad34bc76 s390: add SMT support
The multi-threading facility is introduced with the z13 processor family.
This patch adds code to detect the multi-threading facility. With the
facility enabled each core will surface multiple hardware threads to the
system. Each hardware threads looks like a normal CPU to the operating
system with all its registers and properties.

The SCLP interface reports the SMT topology indirectly via the maximum
thread id. Each reported CPU in the result of a read-scp-information
is a core representing a number of hardware threads.

To reflect the reduced CPU capacity if two hardware threads run on a
single core the MT utilization counter set is used to normalize the
raw cputime obtained by the CPU timer deltas. This scaled cputime is
reported via the taskstats interface. The normal /proc/stat numbers
are based on the raw cputime and are not affected by the normalization.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-22 12:16:01 +01:00
Thomas Richter
1dafd09442 qeth: Remove unneeded structure member
The member irq_tasklet in the qeth_channel structure
is not referenced anymore and is removed from the
structure.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17 23:55:00 -05:00
Eugene Crosser
7e846d6b91 qeth: sysfs: replace strcmp() with sysfs_streq()
Replace combination of strsep() and a temporary char *
followed by a series of "if (!strcmp(...))" with a series
of "if (sysfs_streq(...))".

Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Reviewed-by: Thomas-Mich Richter <tmricht@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17 23:55:00 -05:00
Eugene Crosser
c3521254b1 qeth: use qeth_card_hw_is_reachable() everywhere
qeth_card_hw_is_reachable() was introduced as part of a new
functionality, but it is a useful abstraction that can replace
verbose checks througout the rest of the `qeth` driver.

Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Reviewed-by: Thomas-Mich Richter <tmricht@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17 23:54:59 -05:00
Markus Elfring
b646c08e12 s390/net: Delete useless checks before function calls
The function debug_unregister() tests whether its argument is
NULL and then returns immediately. Thus the test around the call
is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17 23:54:59 -05:00
Aya Mahfouz
ee6edb9707 s390/ctcm, netiucv: migrate variables to handle y2038 problem
This patch is concerned with migrating the time variables for the s390
network drivers. The changes handle the y2038 problem where timespec will
overflow in the year 2038. timespec was replaced by unsigned long and
all time variables get their values from the jiffies global variable.
This was done for the sake of speed and efficiency.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17 23:54:59 -05:00
Syam Sidhardhan
e982506730 s390/hmcdrv: remove unnecessary version.h inclusion
version.h inclusion is not necessary as detected by versioncheck.

Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-15 11:11:16 +01:00
David S. Miller
3f3558bb51 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/xen-netfront.c

Minor overlapping changes in xen-netfront.c, mostly to do
with some buffer management changes alongside the split
of stats into TX and RX.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 00:53:17 -05:00
Matthew Wilcox
dd22f551ac block: Change direct_access calling convention
In order to support accesses to larger chunks of memory, pass in a
'size' parameter (counted in bytes), and return the amount available at
that address.

Add a new helper function, bdev_direct_access(), to handle common
functionality including partition handling, checking the length requested
is positive, checking for the sector being page-aligned, and checking
the length of the request does not pass the end of the partition.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Boaz Harrosh <boaz@plexistor.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-13 21:58:11 -07:00
Jiri Pirko
df8a39defa net: rename vlan_tx_* helpers since "tx" is misleading there
The same macros are used for rx as well. So rename it.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13 17:51:08 -05:00
Rickard Strandqvist
8ebd51a705 s390/cio: idset.c: remove some unused functions
Removes some functions that are not used anywhere:
idset_clear() idset_sch_get_first()

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-08 10:02:50 +01:00
Harald Freudenberger
099eae11a8 s390/zcrypt: kernel oops at insmod of the z90crypt device driver
Kernel oops caused by invalid parameter at TAPQ instruction:
On older systems where the QCI instruction is not available
all possible domains are probed via TAPQ instruction. The
range for the probe has been extended with the > 16 domain
support now leading to a possible specification exception
when this instruction is called for probing higher values
within the new range. This may happen during insmod and/or
ap bus reset only on machines without a QCI instruction (z10,
z196, z114), zEC12 and newer systems are not affected.
The fix modifies the domain checking function to limit the
allowed range if no QCI info is available.

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-18 09:55:55 +01:00
Linus Torvalds
e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Linus Torvalds
e3aa91a7cb Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 - The crypto API is now documented :)
 - Disallow arbitrary module loading through crypto API.
 - Allow get request with empty driver name through crypto_user.
 - Allow speed testing of arbitrary hash functions.
 - Add caam support for ctr(aes), gcm(aes) and their derivatives.
 - nx now supports concurrent hashing properly.
 - Add sahara support for SHA1/256.
 - Add ARM64 version of CRC32.
 - Misc fixes.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (77 commits)
  crypto: tcrypt - Allow speed testing of arbitrary hash functions
  crypto: af_alg - add user space interface for AEAD
  crypto: qat - fix problem with coalescing enable logic
  crypto: sahara - add support for SHA1/256
  crypto: sahara - replace tasklets with kthread
  crypto: sahara - add support for i.MX53
  crypto: sahara - fix spinlock initialization
  crypto: arm - replace memset by memzero_explicit
  crypto: powerpc - replace memset by memzero_explicit
  crypto: sha - replace memset by memzero_explicit
  crypto: sparc - replace memset by memzero_explicit
  crypto: algif_skcipher - initialize upon init request
  crypto: algif_skcipher - removed unneeded code
  crypto: algif_skcipher - Fixed blocking recvmsg
  crypto: drbg - use memzero_explicit() for clearing sensitive data
  crypto: drbg - use MODULE_ALIAS_CRYPTO
  crypto: include crypto- module prefix in template
  crypto: user - add MODULE_ALIAS
  crypto: sha-mb - remove a bogus NULL check
  crytpo: qat - Fix 64 bytes requests
  ...
2014-12-13 13:33:26 -08:00
Linus Torvalds
a7cb7bb664 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree update from Jiri Kosina:
 "Usual stuff: documentation updates, printk() fixes, etc"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
  intel_ips: fix a type in error message
  cpufreq: cpufreq-dt: Move newline to end of error message
  ps3rom: fix error return code
  treewide: fix typo in printk and Kconfig
  ARM: dts: bcm63138: change "interupts" to "interrupts"
  Replace mentions of "list_struct" to "list_head"
  kernel: trace: fix printk message
  scsi: mpt2sas: fix ioctl in comment
  zbud, zswap: change module author email
  clocksource: Fix 'clcoksource' typo in comment
  arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help
  gpio: msm-v1: make boolean argument more obvious
  usb: Fix typo in usb-serial-simple.c
  PCI: Fix comment typo 'COMFIG_PM_OPS'
  powerpc: Fix comment typo 'CONIFG_8xx'
  powerpc: Fix comment typos 'CONFiG_ALTIVEC'
  clk: st: Spelling s/stucture/structure/
  isci: Spelling s/stucture/structure/
  usb: gadget: zero: Spelling s/infrastucture/infrastructure/
  treewide: Fix company name in module descriptions
  ...
2014-12-12 10:08:06 -08:00
Linus Torvalds
27afc5dbda Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "The most notable change for this pull request is the ftrace rework
  from Heiko.  It brings a small performance improvement and the ground
  work to support a new gcc option to replace the mcount blocks with a
  single nop.

  Two new s390 specific system calls are added to emulate user space
  mmio for PCI, an artifact of the how PCI memory is accessed.

  Two patches for the memory management with changes to common code.
  For KVM mm_forbids_zeropage is added which disables the empty zero
  page for an mm that is used by a KVM process.  And an optimization,
  pmdp_get_and_clear_full is added analog to ptep_get_and_clear_full.

  Some micro optimization for the cmpxchg and the spinlock code.

  And as usual bug fixes and cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits)
  s390/cputime: fix 31-bit compile
  s390/scm_block: make the number of reqs per HW req configurable
  s390/scm_block: handle multiple requests in one HW request
  s390/scm_block: allocate aidaw pages only when necessary
  s390/scm_block: use mempool to manage aidaw requests
  s390/eadm: change timeout value
  s390/mm: fix memory leak of ptlock in pmd_free_tlb
  s390: use local symbol names in entry[64].S
  s390/ptrace: always include vector registers in core files
  s390/simd: clear vector register pointer on fork/clone
  s390: translate cputime magic constants to macros
  s390/idle: convert open coded idle time seqcount
  s390/idle: add missing irq off lockdep annotation
  s390/debug: avoid function call for debug_sprintf_*
  s390/kprobes: fix instruction copy for out of line execution
  s390: remove diag 44 calls from cpu_relax()
  s390/dasd: retry partition detection
  s390/dasd: fix list corruption for sleep_on requests
  s390/dasd: fix infinite term I/O loop
  s390/dasd: remove unused code
  ...
2014-12-11 17:30:55 -08:00
Linus Torvalds
70e71ca0af Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) New offloading infrastructure and example 'rocker' driver for
    offloading of switching and routing to hardware.

    This work was done by a large group of dedicated individuals, not
    limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
    Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu

 2) Start making the networking operate on IOV iterators instead of
    modifying iov objects in-situ during transfers.  Thanks to Al Viro
    and Herbert Xu.

 3) A set of new netlink interfaces for the TIPC stack, from Richard
    Alpe.

 4) Remove unnecessary looping during ipv6 routing lookups, from Martin
    KaFai Lau.

 5) Add PAUSE frame generation support to gianfar driver, from Matei
    Pavaluca.

 6) Allow for larger reordering levels in TCP, which are easily
    achievable in the real world right now, from Eric Dumazet.

 7) Add a variable of napi_schedule that doesn't need to disable cpu
    interrupts, from Eric Dumazet.

 8) Use a doubly linked list to optimize neigh_parms_release(), from
    Nicolas Dichtel.

 9) Various enhancements to the kernel BPF verifier, and allow eBPF
    programs to actually be attached to sockets.  From Alexei
    Starovoitov.

10) Support TSO/LSO in sunvnet driver, from David L Stevens.

11) Allow controlling ECN usage via routing metrics, from Florian
    Westphal.

12) Remote checksum offload, from Tom Herbert.

13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
    driver, from Thomas Lendacky.

14) Add MPLS support to openvswitch, from Simon Horman.

15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
    Klassert.

16) Do gro flushes on a per-device basis using a timer, from Eric
    Dumazet.  This tries to resolve the conflicting goals between the
    desired handling of bulk vs.  RPC-like traffic.

17) Allow userspace to ask for the CPU upon what a packet was
    received/steered, via SO_INCOMING_CPU.  From Eric Dumazet.

18) Limit GSO packets to half the current congestion window, from Eric
    Dumazet.

19) Add a generic helper so that all drivers set their RSS keys in a
    consistent way, from Eric Dumazet.

20) Add xmit_more support to enic driver, from Govindarajulu
    Varadarajan.

21) Add VLAN packet scheduler action, from Jiri Pirko.

22) Support configurable RSS hash functions via ethtool, from Eyal
    Perry.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
  Fix race condition between vxlan_sock_add and vxlan_sock_release
  net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
  net/mlx4: Add support for A0 steering
  net/mlx4: Refactor QUERY_PORT
  net/mlx4_core: Add explicit error message when rule doesn't meet configuration
  net/mlx4: Add A0 hybrid steering
  net/mlx4: Add mlx4_bitmap zone allocator
  net/mlx4: Add a check if there are too many reserved QPs
  net/mlx4: Change QP allocation scheme
  net/mlx4_core: Use tasklet for user-space CQ completion events
  net/mlx4_core: Mask out host side virtualization features for guests
  net/mlx4_en: Set csum level for encapsulated packets
  be2net: Export tunnel offloads only when a VxLAN tunnel is created
  gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
  cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
  net: fec: only enable mdio interrupt before phy device link up
  net: fec: clear all interrupt events to support i.MX6SX
  net: fec: reset fep link status in suspend function
  net: sock: fix access via invalid file descriptor
  net: introduce helper macro for_each_cmsghdr
  ...
2014-12-11 14:27:06 -08:00
Linus Torvalds
6b9e2cea42 virtio: virtio 1.0 support, misc patches
This adds a lot of infrastructure for virtio 1.0 support.
 Notable missing pieces: virtio pci, virtio balloon (needs spec extension),
 vhost scsi.
 
 Plus, there are some minor fixes in a couple of places.
 
 Cc: David Miller <davem@davemloft.net>
 Cc: Rusty Russell <rusty@rustcorp.com.au>
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUh1CVAAoJECgfDbjSjVRpWZcH/2+EGPyng7Lca820UHA0cU1U
 u4D8CAAwOGaVdnUUo8ox1eon3LNB2UgRtgsl3rBDR3YTgFfNPrfuYdnHO0dYIDc1
 lS26NuPrVrTX0lA+OBPe2nlKrsrOkn8aw1kxG9Y0gKtNg/+HAGNW5e2eE7R/LrA5
 94XbWZ8g9Yf4GPG1iFmih9vQvvN0E68zcUlojfCnllySgaIEYr8nTiGQBWpRgJat
 fCqFAp1HMDZzGJQO+m1/Vw0OftTRVybyfai59e6uUTa8x1djvzPb/1MvREqQjegM
 ylSuofIVyj7JPu++FbAjd9mikkb53GSc8ql3YmWNZLdr69rnkzP0GdzQvrdheAo=
 =RtrR
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:
 "virtio: virtio 1.0 support, misc patches

  This adds a lot of infrastructure for virtio 1.0 support.  Notable
  missing pieces: virtio pci, virtio balloon (needs spec extension),
  vhost scsi.

  Plus, there are some minor fixes in a couple of places.

  Note: some net drivers are affected by these patches.  David said he's
  fine with merging these patches through my tree.

  Rusty's on vacation, he acked using my tree for these, too"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (70 commits)
  virtio_ccw: finalize_features error handling
  virtio_ccw: future-proof finalize_features
  virtio_pci: rename virtio_pci -> virtio_pci_common
  virtio_pci: update file descriptions and copyright
  virtio_pci: split out legacy device support
  virtio_pci: setup config vector indirectly
  virtio_pci: setup vqs indirectly
  virtio_pci: delete vqs indirectly
  virtio_pci: use priv for vq notification
  virtio_pci: free up vq->priv
  virtio_pci: fix coding style for structs
  virtio_pci: add isr field
  virtio: drop legacy_only driver flag
  virtio_balloon: drop legacy_only driver flag
  virtio_ccw: rev 1 devices set VIRTIO_F_VERSION_1
  virtio: allow finalize_features to fail
  virtio_ccw: legacy: don't negotiate rev 1/features
  virtio: add API to detect legacy devices
  virtio_console: fix sparse warnings
  vhost: remove unnecessary forward declarations in vhost.h
  ...
2014-12-11 12:20:31 -08:00
Linus Torvalds
cbfe0de303 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS changes from Al Viro:
 "First pile out of several (there _definitely_ will be more).  Stuff in
  this one:

   - unification of d_splice_alias()/d_materialize_unique()

   - iov_iter rewrite

   - killing a bunch of ->f_path.dentry users (and f_dentry macro).

     Getting that completed will make life much simpler for
     unionmount/overlayfs, since then we'll be able to limit the places
     sensitive to file _dentry_ to reasonably few.  Which allows to have
     file_inode(file) pointing to inode in a covered layer, with dentry
     pointing to (negative) dentry in union one.

     Still not complete, but much closer now.

   - crapectomy in lustre (dead code removal, mostly)

   - "let's make seq_printf return nothing" preparations

   - assorted cleanups and fixes

  There _definitely_ will be more piles"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  copy_from_iter_nocache()
  new helper: iov_iter_kvec()
  csum_and_copy_..._iter()
  iov_iter.c: handle ITER_KVEC directly
  iov_iter.c: convert copy_to_iter() to iterate_and_advance
  iov_iter.c: convert copy_from_iter() to iterate_and_advance
  iov_iter.c: get rid of bvec_copy_page_{to,from}_iter()
  iov_iter.c: convert iov_iter_zero() to iterate_and_advance
  iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds
  iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds
  iov_iter.c: convert iov_iter_npages() to iterate_all_kinds
  iov_iter.c: iterate_and_advance
  iov_iter.c: macros for iterating over iov_iter
  kill f_dentry macro
  dcache: fix kmemcheck warning in switch_names
  new helper: audit_file()
  nfsd_vfs_write(): use file_inode()
  ncpfs: use file_inode()
  kill f_dentry uses
  lockd: get rid of ->f_path.dentry->d_sb
  ...
2014-12-10 16:10:49 -08:00
Cornelia Huck
f01a2a811a virtio_ccw: finalize_features error handling
We previously tried to use device even if finalize_features failed, but
that's wrong since driver and device are now out of sync.

Fail probe if we detect failures during finalize_features.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09 21:42:06 +02:00
Michael S. Tsirkin
f13d8bc2a1 virtio_ccw: future-proof finalize_features
We never negotiate revision > 1, but just to
make this code more likely to work when we do,
require VERSION_1 with any revision >= 1.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09 21:42:06 +02:00
Michael S. Tsirkin
4d23676fb6 virtio_ccw: rev 1 devices set VIRTIO_F_VERSION_1
What does it mean if rev 1 device does not set
VIRTIO_F_VERSION_1? E.g. is it native endian?

Let's not even try to drive such devices:
fail attempts to finalize features.
virtio core will detect this and bail out.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09 21:41:58 +02:00
Michael S. Tsirkin
5c609a5ef0 virtio: allow finalize_features to fail
This will make it easy for transports to validate features and return
failure.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09 16:32:32 +02:00
Michael S. Tsirkin
ce15408f35 virtio_ccw: legacy: don't negotiate rev 1/features
Legacy balloon device doesn't pretend to support revision 1 or 64 bit
features.

But just in case someone implements a broken one that does, let's not
even try to drive legacy only devices using revision 1, and let's not
give them a chance to say they support VIRTIO_F_VERSION_1 by not reading
or writing high feature bits.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09 16:32:32 +02:00
Cornelia Huck
af9ca13b44 KVM: s390: enable virtio-ccw revision 1
Now that virtio-ccw has everything needed to support virtio 1.0 in
place, try to enable it if the host supports it.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09 12:05:27 +02:00
Michael S. Tsirkin
485551366d KVM: s390 allow virtio_ccw status writes to fail
Gracefully handle failure to write device status.
We really should handle other errors as well, but this one is needed for
virtio 1.0 compliance.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09 12:05:27 +02:00
Cornelia Huck
d4674240f3 KVM: s390: virtio-ccw revision 1 SET_VQ
The CCW_CMD_SET_VQ command has a different format for revision 1+
devices, allowing to specify a more complex virtqueue layout. For
now, we stay however with the old layout and simply use the new
command format for virtio-1 devices.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
2014-12-09 12:05:26 +02:00
Thomas Huth
6bb2c835c7 KVM: s390: Set virtio-ccw transport revision
With the new SET-VIRTIO-REVISION command of the virtio 1.0 standard, we
can now negotiate the virtio-ccw revision after setting a channel online.

Note that we don't negotiate version 1 yet.

[Cornelia Huck: reworked revision loop a bit]
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09 12:05:26 +02:00
Michael S. Tsirkin
732c56e984 virtio_ccw: add support for 64 bit features.
Negotiate full 64 bit features.
Change u32 to u64, make sure to use 1ULL everywhere.

Note: devices guarantee that VERSION_1 is clear unless
revision 1 is negotiated.

Note: We don't need to re-setup the ccw, but we do it
for clarity.

Based on patches by Rusty, Thomas Huth and Cornelia.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildebrand <dahi@linux.vnet.ibm.com>
2014-12-09 12:05:24 +02:00
Michael S. Tsirkin
93d389f820 virtio: assert 32 bit features in transports
At this point, no transports set any of the high 32 feature bits.
Since transports generally can't (yet) cope with such bits, add BUG_ON
checks to make sure they are not set by mistake.

Based on rproc patch by Rusty.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09 12:05:24 +02:00
Michael S. Tsirkin
d025477368 virtio: add support for 64 bit features.
Change u32 to u64, and use BIT_ULL and 1ULL everywhere.

Note: transports are unchanged, and only set low 32 bit.
This guarantees that no transport sets e.g. VERSION_1
by mistake without proper support.

Based on patch by Rusty.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09 12:05:24 +02:00
Michael S. Tsirkin
e16e12be34 virtio: use u32, not bitmap for features
It seemed like a good idea to use bitmap for features
in struct virtio_device, but it's actually a pain,
and seems to become even more painful when we get more
than 32 feature bits.  Just change it to a u32 for now.

Based on patch by Rusty.

Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09 12:05:23 +02:00
Al Viro
ba00410b81 Merge branch 'iov_iter' into for-next 2014-12-08 20:39:29 -05:00
James Bottomley
096cbc35ea Merge remote-tracking branch 'scsi-queue/drivers-for-3.19' into for-linus
Conflicts:
	drivers/scsi/scsi_debug.c

Agreed and tested resolution to a merge problem between a fix in scsi_debug
and a driver update

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-12-08 07:42:25 -08:00
James Bottomley
dc843ef00e Merge remote-tracking branch 'scsi-queue/core-for-3.19' into for-linus 2014-12-08 07:40:20 -08:00
Sebastian Ott
8622384f13 s390/scm_block: make the number of reqs per HW req configurable
Introduce a module parameter to specify the number of requests
we try to handle with one HW request.

Suggested-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-08 09:42:47 +01:00
Sebastian Ott
bbc610a965 s390/scm_block: handle multiple requests in one HW request
Handle up to 8 block layer requests per HW request. These requests
can be processed in parallel on the device leading to better
throughput (and less interrupts). The overhead for additional
requests is small since we don't blindly allocate new aidaws but
try to use what's left of the previous one.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-08 09:42:46 +01:00
Sebastian Ott
de88d0d28f s390/scm_block: allocate aidaw pages only when necessary
AOBs (the structure describing the HW request) need to be 4K
aligned but very little of that page is actually used. With
this patch we place aidaws at the end of the AOB page and only
allocate a separate page for aidaws when we have to (lists of
aidaws must not cross page boundaries).

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-08 09:42:44 +01:00
Sebastian Ott
9d4df77fab s390/scm_block: use mempool to manage aidaw requests
We currently use one preallocated page per HW request to store
aidaws. With this patch we use mempool to allocate an aidaw page
whenever we need it.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-08 09:42:43 +01:00
Sebastian Ott
e2578b82c4 s390/eadm: change timeout value
Tests have shown that 5 seconds is sometimes not enough for an IRQ
to arrive (especially when the device is doing garbage collection).
Let's wait a little longer.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-08 09:42:42 +01:00
Stefan Haberland
6ebdf1c79d s390/dasd: retry partition detection
In case somebody attempted to open the device during online
processing the partition detection ioctl may have failed.

Added a retry loop to avoid not detected partitions.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-28 09:47:42 +01:00
Stefan Haberland
932f0549f8 s390/dasd: fix list corruption for sleep_on requests
Fix race for sleep_on requests leading to list corruption.
The SLEEP_ON_END_TAG is set during CQR clean up. Remove it from
interrupt handler to avoid the CQR from being cleared when it is
still in the device_queue.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-28 09:47:36 +01:00
Stefan Haberland
2c17124bf3 s390/dasd: fix infinite term I/O loop
During device activation all paths could be lost and since the device
is not active it has no indication of this fact - hence the CQR will
time-out. The following cancelation might fail with -EINVAL because
CIO took over control and started path verification. In this case mark
the CQR as being CLEARED since it could not be running any more.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-28 09:47:29 +01:00
Stefan Haberland
590aeeddc6 s390/dasd: remove unused code
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-28 09:47:24 +01:00
Martin Schwidefsky
b3e06dc3f0 s390/sclp_async: add Kconfig option to specify the component id
Allow to specify the Compoment ID for Call Home via the kernel
configuration. This removes the need for distribution specific
patch against the sclp_async.c source file.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-28 09:45:11 +01:00
Kees Cook
5d26a105b5 crypto: prefix module autoloading with "crypto-"
This prefixes all crypto module loading with "crypto-" so we never run
the risk of exposing module auto-loading to userspace via a crypto API,
as demonstrated by Mathias Krause:

https://lkml.org/lkml/2013/3/4/70

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-24 22:43:57 +08:00
Christoph Hellwig
db5ed4dfd5 scsi: drop reason argument from ->change_queue_depth
Drop the now unused reason argument from the ->change_queue_depth method.
Also add a return value to scsi_adjust_queue_depth, and rename it to
scsi_change_queue_depth now that it can be used as the default
->change_queue_depth implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24 14:45:27 +01:00
Christoph Hellwig
c40ecc12cf scsi: avoid ->change_queue_depth indirection for queue full tracking
All drivers use the implementation for ramping the queue up and down, so
instead of overloading the change_queue_depth method call the
implementation diretly if the driver opts into it by setting the
track_queue_depth flag in the host template.

Note that a few drivers validated the new queue depth in their
change_queue_depth method, but as we never go over the queue depth
set during slave_configure or the sysfs file this isn't nessecary
and can safely be removed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-11-24 14:45:12 +01:00
Masanari Iida
6774def642 treewide: fix typo in printk and Kconfig
This patch fix spelling typo in printk and Kconfig within
various part of kernel sources.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-20 14:56:11 +01:00
Martin Peschke
18f87a67e6 zfcp: auto port scan resiliency
This patch improves the Fibre Channel port scan behaviour of the zfcp lldd.
Without it the zfcp device driver may churn up the storage area network by
excessive scanning and scan bursts, particularly in big virtual server
environments, potentially resulting in interference of virtual servers and
reduced availability of storage connectivity.

The two main issues as to the zfcp device drivers automatic port scan in
virtual server environments are frequency and simultaneity.
On the one hand, there is no point in allowing lots of ports scans
in a row. It makes sense, though, to make sure that a scan is conducted
eventually if there has been any indication for potential SAN changes.
On the other hand, lots of virtual servers receiving the same indication
for a SAN change had better not attempt to conduct a scan instantly,
that is, at the same time.

Hence this patch has a two-fold approach for better port scanning:
the introduction of a rate limit to amend frequency issues, and the
introduction of a short random backoff to amend simultaneity issues.
Both approaches boil down to deferred port scans, with delays
comprising parts for both approaches.

The new port scan behaviour is summarised best by:

                                               NEW:    NEW:
                          no_auto_port_rescan  random  rate    flush
                                               backoff limit   =wait

adapter resume/thaw       yes                  yes     no      yes*
adapter online (user)     no                   yes     no      yes*
port rescan (user)        no                   no      no      yes
adapter recovery (user)   yes                  yes     yes     no
adapter recovery (other)  yes                  yes     yes     no
incoming ELS              yes                  yes     yes     no
incoming ELS lost         yes                  yes     yes     no

Implementation is straight-forward by converting an existing worker to
a delayed worker. But care is needed whenever that worker is going to be
flushed (in order to make sure work has been completed), since a flush
operation cancels the timer set up for deferred execution (see * above).

There is a small race window whenever a port scan work starts
running up to the point in time of storing the time stamp for that port
scan. The impact is negligible. Closing that gap isn't trivial, though, and
would the destroy the beauty of a simple work-to-delayed-work conversion.

Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20 09:11:30 +01:00
Steffen Maier
c8bba14435 zfcp: bring back unit sysfs attributes for automatic LUN scan
Through sysfs attributes, zfcp unit objects
provide a trigger for manual LUN recovery
and export information for problem determination.

With commit
f8210e3488
"[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode"
and when attaching SCSI devices through this new optional method,
no more zfcp unit objects are allocated for such SCSI devices.
Hence, the above-mentioned trigger and information were missing.

The information and context is located in SCSI transport device data since
b62a8d9b45
"[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit"
57c237731b
"[SCSI] zfcp: Add zfcp private struct as SCSI device driver data"
Hence, introduce the trigger and the information unconditionally
for all SCSI devices attached through zfcp.

We prefix the attribute names with 'zfcp_' to prevent collisions and
to avoid mix-ups such as with the common 'state' attribute.

Since some of the new attribute views do not need zfcp_port
in the ZFCP_DEFINE_SCSI_ATTR helper macro, remove zfcp_port
to avoid compiler warnings on unused variable.
It's easy to open code the conversion from zfcp_scsi_dev to zfcp_port
for the two already existing attributes hba_id and wwpn.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20 09:11:29 +01:00
Martin Peschke
1b33ef2394 zfcp: remove access control tables interface (port leftovers)
This patch removes some leftovers for commit
663e0890e3
"[SCSI] zfcp: remove access control tables interface".

The "access denied" case for ports is gone, as well.
The corresponding flag was cleared, but never set.
So clean it up.

Sysfs flag is kept, though, for backward-compatibility.
Now it returns always 0.

Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20 09:11:28 +01:00
Al Viro
a455589f18 assorted conversions to %p[dD]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-19 13:01:20 -05:00
David S. Miller
076ce44825 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/chelsio/cxgb4vf/sge.c
	drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c

sge.c was overlapping two changes, one to use the new
__dev_alloc_page() in net-next, and one to use s->fl_pg_order in net.

ixgbe_phy.c was a set of overlapping whitespace changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-14 01:01:12 -05:00
Christoph Hellwig
c8b09f6fb6 scsi: don't set tagging state from scsi_adjust_queue_depth
Remove the tagged argument from scsi_adjust_queue_depth, and just let it
handle the queue depth.  For most drivers those two are fairly separate,
given that most modern drivers don't care about the SCSI "tagged" status
of a command at all, and many old drivers allow queuing of multiple
untagged commands in the driver.

Instead we start out with the ->simple_tags flag set before calling
->slave_configure, which is how all drivers actually looking at
->simple_tags except for one worke anyway.  The one other case looks
broken, but I've kept the behavior as-is for now.

Except for that we only change ->simple_tags from the ->change_queue_type,
and when rejecting a tag message in a single driver, so keeping this
churn out of scsi_adjust_queue_depth is a clear win.

Now that the usage of scsi_adjust_queue_depth is more obvious we can
also remove all the trivial instances in ->slave_alloc or ->slave_configure
that just set it to the cmd_per_lun default.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-11-12 11:19:43 +01:00
Christoph Hellwig
5066863337 scsi: remove abuses of scsi_populate_tag
Unless we want to build a SPI tag message we should just check SCMD_TAGGED
instead of reverse engineering a tag type through the use of
scsi_populate_tag_msg.

Also rename the function to spi_populate_tag_msg, make it behave like the
other spi message helpers, and move it to the spi transport class.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12 11:19:41 +01:00
Greg Kroah-Hartman
a8a93c6f99 Merge branch 'platform/remove_owner' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next
Remove all .owner fields from platform drivers
2014-11-03 19:53:56 -08:00
Sebastian Ott
f7ceb0dfec KVM: s390: virtio_ccw: remove unused variable
Fix this warning:
drivers/s390/kvm/virtio_ccw.c: In function ‘virtio_ccw_int_handler’:
drivers/s390/kvm/virtio_ccw.c:891:24: warning: unused variable ‘drv’ [-Wunused-variable]
    struct virtio_driver *drv;

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-11-03 10:43:00 +01:00
David S. Miller
55b42b5ca2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/phy/marvell.c

Simple overlapping changes in drivers/net/phy/marvell.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01 14:53:27 -04:00
Thomas Richter
652d77ba7b ctcm: replace sscanf by kstrto function
Since a single integer value is read from the supplied buffer
use the kstrto functions instead of sscanf.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26 22:21:40 -04:00
Thomas Richter
786f00659a lcs: replace sscanf by kstrto function
Since a single integer value is read from the supplied buffer
use the kstrto functions instead of sscanf.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26 22:21:39 -04:00
Thomas Richter
3d14f661e6 qeth: s390 ethernet device driver dependency
Compile the s390 10GB ethernet device driver only when
ETHERNET has been defined in the kernel configuration file.
Right now the qeth device driver is always built regardless
of which network connectivity is active.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26 22:21:39 -04:00
Thomas Richter
56530d684e qeth: make local functions static in qeth_l3 module
This patch makes 4 local functions static and removes
the prototypes from the header file.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26 22:21:39 -04:00
Thomas Richter
8a59314848 qeth: fix some trace formating issues
This patch fixes trace formatting issues using the
QETH_CARD_TEXT_ macro. The total size of each trace entry
is 8 bytes. Some of the sprintf formats exceed these 8
bytes (for example using abcd:%d and the converted value
needs more than 3 bytes). The solution is to shorten the
text prepending the value or use a different format (%x).

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26 22:21:39 -04:00
Thomas Richter
bca516502e qeth: qeth_core_main make local functions static
This patch makes some global functions static and removes
the prototypes from the header file.
Also function qeth_query_card_info is not exported anymore,
there is no external user for it, this function should never
have been exported in the first place.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26 22:21:39 -04:00
Linus Torvalds
c4301c3266 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "One patch to enable the BPF system call and three more bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/uprobes: fix kprobes dependency
  s390: wire up bpf syscall
  s390/mm: fixing calls of pte_unmap_unlock
  s390/hmcdrv: Restrict s390 HMC driver to S390 arch
2014-10-21 07:47:54 -07:00
Wolfram Sang
f3326ec8a4 s390: char: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:32 +02:00
Wolfram Sang
1cd5ad7eef s390: block: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:31 +02:00
Linus Torvalds
e75437fb93 Merge branch 'for-3.18/drivers' of git://git.kernel.dk/linux-block
Pull block layer driver update from Jens Axboe:
 "This is the block driver pull request for 3.18.  Not a lot in there
  this round, and nothing earth shattering.

   - A round of drbd fixes from the linbit team, and an improvement in
     asender performance.

   - Removal of deprecated (and unused) IRQF_DISABLED flag in rsxx and
     hd from Michael Opdenacker.

   - Disable entropy collection from flash devices by default, from Mike
     Snitzer.

   - A small collection of xen blkfront/back fixes from Roger Pau Monné
     and Vitaly Kuznetsov"

* 'for-3.18/drivers' of git://git.kernel.dk/linux-block:
  block: disable entropy contributions for nonrot devices
  xen, blkfront: factor out flush-related checks from do_blkif_request()
  xen-blkback: fix leak on grant map error path
  xen/blkback: unmap all persistent grants when frontend gets disconnected
  rsxx: Remove deprecated IRQF_DISABLED
  block: hd: remove deprecated IRQF_DISABLED
  drbd: use RB_DECLARE_CALLBACKS() to define augment callbacks
  drbd: compute the end before rb_insert_augmented()
  drbd: Add missing newline in resync progress display in /proc/drbd
  drbd: reduce lock contention in drbd_worker
  drbd: Improve asender performance
  drbd: Get rid of the WORK_PENDING macro
  drbd: Get rid of the __no_warn and __cond_lock macros
  drbd: Avoid inconsistent locking warning
  drbd: Remove superfluous newline from "resync_extents" debugfs entry.
  drbd: Use consistent names for all the bi_end_io callbacks
  drbd: Use better variable names
2014-10-18 12:12:45 -07:00
Linus Torvalds
0e6e58f941 One cc: stable commit, the rest are a series of minor cleanups which have
been sitting in MST's tree during my vacation.  I changed a function name
 and made one trivial change, then they spent two days in linux-next.
 
 Thanks,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUQFBQAAoJENkgDmzRrbjxJRIP/1yCQRElQewxURSmJelyqCdU
 0mHYB0R9Mf3tfre1xnofqs2lWeSMc/4ptKHsVR6pupoztSwnz7HsLHfEFvFJh4mj
 KsaqYElxkNxTcfyHwLjyJS0/J6tG1tYypXGiimTBS0bvFHL3XZdimVgJ6WvX+gO7
 YSaDEX8/EqCERafslS5+gKJlz3drDOnCZCe9y4BDSmsvl2k7bkpSxIn8vsR6jIC0
 c5JpUy6QVF+3XA/J932M7yRs+xpqxNoUWiyY3ar9o3CtQAaQB0ZAetSxY6hTfvVc
 GlNFzCifdsaQwsl2SVsE2h6tWaRhtMtcGWQuhHThIPyIf8XxhYyBRY2FLo70LMz1
 eqtwy6F/Bg/nzUsdee4PZBMeoKHlAEL12RpsEKgfUoLzj16Aqa8ll+Agbglbkw8G
 f3d2FwzKAlpY5NwHETC1wYy52PJ3efqksRWuhokmYpxNSbHJS/lsiJOE7272/4Qr
 MtXuvRmo22tf34XFd5y7zqWjgZ58eeFOqQWi/K+6ZgpqVOvikjrXXKEuiVdjO0ZD
 kTVR/sQKiR+79rzENk80XBhWaMveECNXF1TiZ/3MmURkmEOBRQMxRQ20BX3exvna
 AJ/WVA5DcfXZc1yyqknE1NLGrvSBMJENH13x2QPwrqNWAryOOKuF1VKKIwWlDw5j
 vtx5nXiJa8YYdxI2TJCN
 =JK6x
 -----END PGP SIGNATURE-----

Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull virtio updates from Rusty Russell:
 "One cc: stable commit, the rest are a series of minor cleanups which
  have been sitting in MST's tree during my vacation.  I changed a
  function name and made one trivial change, then they spent two days in
  linux-next"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (25 commits)
  virtio-rng: refactor probe error handling
  virtio_scsi: drop scan callback
  virtio_balloon: enable VQs early on restore
  virtio_scsi: fix race on device removal
  virito_scsi: use freezable WQ for events
  virtio_net: enable VQs early on restore
  virtio_console: enable VQs early on restore
  virtio_scsi: enable VQs early on restore
  virtio_blk: enable VQs early on restore
  virtio_scsi: move kick event out from virtscsi_init
  virtio_net: fix use after free on allocation failure
  9p/trans_virtio: enable VQs early
  virtio_console: enable VQs early
  virtio_blk: enable VQs early
  virtio_net: enable VQs early
  virtio: add API to enable VQs early
  virtio_net: minor cleanup
  virtio-net: drop config_mutex
  virtio_net: drop config_enable
  virtio-blk: drop config_mutex
  ...
2014-10-18 10:25:09 -07:00
Josh Boyer
c9eeb7b813 s390/hmcdrv: Restrict s390 HMC driver to S390 arch
This driver is only usable on 64-bit s390 machines.  Mark the Kconfig
dependencies to that users on other architectures are not prompted for it.

Fixes: 8f933b1043 ("s390/hmcdrv: HMC drive CD/DVD access")
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 16:56:26 +02:00
Linus Torvalds
0429fbc0bd Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu consistent-ops changes from Tejun Heo:
 "Way back, before the current percpu allocator was implemented, static
  and dynamic percpu memory areas were allocated and handled separately
  and had their own accessors.  The distinction has been gone for many
  years now; however, the now duplicate two sets of accessors remained
  with the pointer based ones - this_cpu_*() - evolving various other
  operations over time.  During the process, we also accumulated other
  inconsistent operations.

  This pull request contains Christoph's patches to clean up the
  duplicate accessor situation.  __get_cpu_var() uses are replaced with
  with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().

  Unfortunately, the former sometimes is tricky thanks to C being a bit
  messy with the distinction between lvalues and pointers, which led to
  a rather ugly solution for cpumask_var_t involving the introduction of
  this_cpu_cpumask_var_ptr().

  This converts most of the uses but not all.  Christoph will follow up
  with the remaining conversions in this merge window and hopefully
  remove the obsolete accessors"

* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
  irqchip: Properly fetch the per cpu offset
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
  ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
  Revert "powerpc: Replace __get_cpu_var uses"
  percpu: Remove __this_cpu_ptr
  clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
  sparc: Replace __get_cpu_var uses
  avr32: Replace __get_cpu_var with __this_cpu_write
  blackfin: Replace __get_cpu_var uses
  tile: Use this_cpu_ptr() for hardware counters
  tile: Replace __get_cpu_var uses
  powerpc: Replace __get_cpu_var uses
  alpha: Replace __get_cpu_var
  ia64: Replace __get_cpu_var uses
  s390: cio driver &__get_cpu_var replacements
  s390: Replace __get_cpu_var uses
  mips: Replace __get_cpu_var uses
  MIPS: Replace __get_cpu_var uses in FPU emulator.
  arm: Replace __this_cpu_ptr with raw_cpu_ptr
  ...
2014-10-15 07:48:18 +02:00
Michael S. Tsirkin
016c98c6fe virtio: unify config_changed handling
Replace duplicated code in all transports with a single wrapper in
virtio.c.

The only functional change is in virtio_mmio.c: if a buggy device sends
us an interrupt before driver is set, we previously returned IRQ_NONE,
now we return IRQ_HANDLED.

As this must not happen in practice, this does not look like a big deal.

See also commit 3fff0179e3
	virtio-pci: do not oops on config change if driver not loaded.
for the original motivation behind the driver check.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15 10:24:54 +10:30
Linus Torvalds
dfe2c6dcc8 Merge branch 'akpm' (patches from Andrew Morton)
Merge second patch-bomb from Andrew Morton:
 - a few hotfixes
 - drivers/dma updates
 - MAINTAINERS updates
 - Quite a lot of lib/ updates
 - checkpatch updates
 - binfmt updates
 - autofs4
 - drivers/rtc/
 - various small tweaks to less used filesystems
 - ipc/ updates
 - kernel/watchdog.c changes

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits)
  mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
  kernel/param: consolidate __{start,stop}___param[] in <linux/moduleparam.h>
  ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[]
  frv: remove unused declarations of __start___ex_table and __stop___ex_table
  kvm: ensure hard lockup detection is disabled by default
  kernel/watchdog.c: control hard lockup detection default
  staging: rtl8192u: use %*pEn to escape buffer
  staging: rtl8192e: use %*pEn to escape buffer
  staging: wlan-ng: use %*pEhp to print SN
  lib80211: remove unused print_ssid()
  wireless: hostap: proc: print properly escaped SSID
  wireless: ipw2x00: print SSID via %*pE
  wireless: libertas: print esaped string via %*pE
  lib/vsprintf: add %*pE[achnops] format specifier
  lib / string_helpers: introduce string_escape_mem()
  lib / string_helpers: refactoring the test suite
  lib / string_helpers: move documentation to c-file
  include/linux: remove strict_strto* definitions
  arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggable
  fs: check bh blocknr earlier when searching lru
  ...
2014-10-14 03:54:50 +02:00
Linus Torvalds
1ee07ef6b5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "This patch set contains the main portion of the changes for 3.18 in
  regard to the s390 architecture.  It is a bit bigger than usual,
  mainly because of a new driver and the vector extension patches.

  The interesting bits are:
   - Quite a bit of work on the tracing front.  Uprobes is enabled and
     the ftrace code is reworked to get some of the lost performance
     back if CONFIG_FTRACE is enabled.
   - To improve boot time with CONFIG_DEBIG_PAGEALLOC, support for the
     IPTE range facility is added.
   - The rwlock code is re-factored to improve writer fairness and to be
     able to use the interlocked-access instructions.
   - The kernel part for the support of the vector extension is added.
   - The device driver to access the CD/DVD on the HMC is added, this
     will hopefully come in handy to improve the installation process.
   - Add support for control-unit initiated reconfiguration.
   - The crypto device driver is enhanced to enable the additional AP
     domains and to allow the new crypto hardware to be used.
   - Bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
  s390/ftrace: simplify enabling/disabling of ftrace_graph_caller
  s390/ftrace: remove 31 bit ftrace support
  s390/kdump: add support for vector extension
  s390/disassembler: add vector instructions
  s390: add support for vector extension
  s390/zcrypt: Toleration of new crypto hardware
  s390/idle: consolidate idle functions and definitions
  s390/nohz: use a per-cpu flag for arch_needs_cpu
  s390/vtime: do not reset idle data on CPU hotplug
  s390/dasd: add support for control unit initiated reconfiguration
  s390/dasd: fix infinite loop during format
  s390/mm: make use of ipte range facility
  s390/setup: correct 4-level kernel page table detection
  s390/topology: call set_sched_topology early
  s390/uprobes: architecture backend for uprobes
  s390/uprobes: common library for kprobes and uprobes
  s390/rwlock: use the interlocked-access facility 1 instructions
  s390/rwlock: improve writer fairness
  s390/rwlock: remove interrupt-enabling rwlock variant.
  s390/mm: remove change bit override support
  ...
2014-10-14 03:47:00 +02:00
Rasmus Villemoes
3f8bfd9a75 s390/cio: replace strnicmp with strncasecmp
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp.  The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.

To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:25 +02:00
Linus Torvalds
faafcba3b5 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
     Hansen)

   - Various sched/idle refinements for better idle handling (Nicolas
     Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)

   - sched/numa updates and optimizations (Rik van Riel)

   - sysbench speedup (Vincent Guittot)

   - capacity calculation cleanups/refactoring (Vincent Guittot)

   - Various cleanups to thread group iteration (Oleg Nesterov)

   - Double-rq-lock removal optimization and various refactorings
     (Kirill Tkhai)

   - various sched/deadline fixes

  ... and lots of other changes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
  sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
  sched/fair: Delete resched_cpu() from idle_balance()
  sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
  sched: Improve sysbench performance by fixing spurious active migration
  sched/x86: Fix up typo in topology detection
  x86, sched: Add new topology for multi-NUMA-node CPUs
  sched/rt: Use resched_curr() in task_tick_rt()
  sched: Use rq->rd in sched_setaffinity() under RCU read lock
  sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
  sched: Use dl_bw_of() under RCU read lock
  sched/fair: Remove duplicate code from can_migrate_task()
  sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
  sched: print_rq(): Don't use tasklist_lock
  sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
  sched: Fix the task-group check in tg_has_rt_tasks()
  sched/fair: Leverage the idle state info when choosing the "idlest" cpu
  sched: Let the scheduler see CPU idle states
  sched/deadline: Fix inter- exclusive cpusets migrations
  sched/deadline: Clear dl_entity params when setscheduling to different class
  sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
  ...
2014-10-13 16:23:15 +02:00
Linus Torvalds
77c688ac87 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "The big thing in this pile is Eric's unmount-on-rmdir series; we
  finally have everything we need for that.  The final piece of prereqs
  is delayed mntput() - now filesystem shutdown always happens on
  shallow stack.

  Other than that, we have several new primitives for iov_iter (Matt
  Wilcox, culled from his XIP-related series) pushing the conversion to
  ->read_iter()/ ->write_iter() a bit more, a bunch of fs/dcache.c
  cleanups and fixes (including the external name refcounting, which
  gives consistent behaviour of d_move() wrt procfs symlinks for long
  and short names alike) and assorted cleanups and fixes all over the
  place.

  This is just the first pile; there's a lot of stuff from various
  people that ought to go in this window.  Starting with
  unionmount/overlayfs mess...  ;-/"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (60 commits)
  fs/file_table.c: Update alloc_file() comment
  vfs: Deduplicate code shared by xattr system calls operating on paths
  reiserfs: remove pointless forward declaration of struct nameidata
  don't need that forward declaration of struct nameidata in dcache.h anymore
  take dname_external() into fs/dcache.c
  let path_init() failures treated the same way as subsequent link_path_walk()
  fix misuses of f_count() in ppp and netlink
  ncpfs: use list_for_each_entry() for d_subdirs walk
  vfs: move getname() from callers to do_mount()
  gfs2_atomic_open(): skip lookups on hashed dentry
  [infiniband] remove pointless assignments
  gadgetfs: saner API for gadgetfs_create_file()
  f_fs: saner API for ffs_sb_create_file()
  jfs: don't hash direct inode
  [s390] remove pointless assignment of ->f_op in vmlogrdr ->open()
  ecryptfs: ->f_op is never NULL
  android: ->f_op is never NULL
  nouveau: __iomem misannotations
  missing annotation in fs/file.c
  fs: namespace: suppress 'may be used uninitialized' warnings
  ...
2014-10-13 11:28:42 +02:00
Michael Holzheu
a62bc07392 s390/kdump: add support for vector extension
With this patch for kdump the s390 vector registers are stored into the
prepared save areas in the old kernel and into the REGSET_VX_LOW and
REGSET_VX_HIGH ELF notes for /proc/vmcore in the new kernel.

The NT_S390_VXRS_LOW note contains the lower halves of the first 16 vector
registers 0-15. The higher halves are stored in the floating point register
ELF note.  The NT_S390_VXRS_HIGH contains the full vector registers 16-31.

The kernel provides a save area for storing vector register in case of
machine checks. A pointer to this save are is stored in the CPU lowcore
at offset 0x11b0. This save area is also used to save the registers for
kdump. In case of a dumped crashed kdump those areas are used to extract
the registers of the production system.

The vector registers for remote CPUs are stored using the "store additional
status at address" SIGP. For the dump CPU the vector registers are stored
with the VSTM instruction.

With this patch also zfcpdump stores the vector registers.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-09 09:14:16 +02:00
Ingo Tuchscherer
42f4dd613f s390/zcrypt: Toleration of new crypto hardware
The zcrypt device driver will accept the new crypto adapter
in toleration mode. A new sysfs attribute 'raw_hwtype' will
expose the raw hardware type.

Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
2014-10-09 09:14:05 +02:00
Martin Schwidefsky
fe0f49768d s390/nohz: use a per-cpu flag for arch_needs_cpu
Move the nohz_delay bit from the s390_idle data structure to the
per-cpu flags. Clear the nohz delay flag in __cpu_disable and
remove the cpu hotplug notifier that used to do this.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-09 09:14:02 +02:00
Stefan Haberland
5db8440c36 s390/dasd: add support for control unit initiated reconfiguration
Add support for Control Unit Initiated Reconfiguration (CUIR) to
Linux, a storage server interface to reconcile concurrent hardware
changes between storage and host.

Reviewed-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-09 09:13:54 +02:00
Stefan Haberland
362ce84f43 s390/dasd: fix infinite loop during format
Error recovery requests may not be cleaned up correctly so that other
needed erp requests can not be build because of insufficient memory.
This would lead to an infinite loop trying to build erp requests.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-09 09:13:51 +02:00
Al Viro
6b933de642 [s390] remove pointless assignment of ->f_op in vmlogrdr ->open()
The only way we can get to that function is from misc_open(), after
the latter has set file->f_op to exactly the same value we are
(re)assigning there.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-09 02:39:13 -04:00
Eric Dumazet
0287587884 net: better IFF_XMIT_DST_RELEASE support
Testing xmit_more support with netperf and connected UDP sockets,
I found strange dst refcount false sharing.

Current handling of IFF_XMIT_DST_RELEASE is not optimal.

Dropping dst in validate_xmit_skb() is certainly too late in case
packet was queued by cpu X but dequeued by cpu Y

The logical point to take care of drop/force is in __dev_queue_xmit()
before even taking qdisc lock.

As Julian Anastasov pointed out, need for skb_dst() might come from some
packet schedulers or classifiers.

This patch adds new helper to cleanly express needs of various drivers
or qdiscs/classifiers.

Drivers that need skb_dst() in their ndo_start_xmit() should call
following helper in their setup instead of the prior :

	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
->
	netif_keep_dst(dev);

Instead of using a single bit, we use two bits, one being
eventually rebuilt in bonding/team drivers.

The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being
rebuilt in bonding/team. Eventually, we could add something
smarter later.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07 13:22:11 -04:00
Mike Snitzer
b277da0a8a block: disable entropy contributions for nonrot devices
Clear QUEUE_FLAG_ADD_RANDOM in all block drivers that set
QUEUE_FLAG_NONROT.

Historically, all block devices have automatically made entropy
contributions.  But as previously stated in commit e2e1a148 ("block: add
sysfs knob for turning off disk entropy contributions"):
    - On SSD disks, the completion times aren't as random as they
      are for rotational drives. So it's questionable whether they
      should contribute to the random pool in the first place.
    - Calling add_disk_randomness() has a lot of overhead.

There are more reliable sources for randomness than non-rotational block
devices.  From a security perspective it is better to err on the side of
caution than to allow entropy contributions from unreliable "random"
sources.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-04 10:55:32 -06:00
Ingo Tuchscherer
46b05c7bd5 s390/zcrypt: Fixed possible race condition in zcrypt module handling
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-25 10:52:04 +02:00
Stefan Haberland
9fc98ad0d2 s390/tape: fix MTIOCGET ioctl to report blocksize
Remove tape_state from status register and report the drive's current
setting for block size instead as known from other tapes.
Density is not supported so nothing to report here.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-25 10:52:03 +02:00
Ralf Hoppe
8f933b1043 s390/hmcdrv: HMC drive CD/DVD access
This device driver allows accessing a HMC drive CD/DVD-ROM.
It can be used in a LPAR and z/VM environment.

Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ralf Hoppe <rhoppe@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-25 10:52:02 +02:00
Martin Schwidefsky
ea61a579ab s390/sclp: reduce dependency on event type masks
The event type masks can change asynchronously. These changes are reported
by SCLP to the OS by state-change events which are retrieved with the read
event data command. The SCLP driver has a request queue, there is a window
where the read event data request has not completed yet but the SCLP console
drivers are trying to queue output requests. As the masks are not updated
yet the requests are discarded.

The simplest fix is to queue the console requests independent of the
event type masks and rely on SCLP to return with an error code if a
specific event type is not available.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-25 10:52:01 +02:00
Ingo Tuchscherer
170387a887 s390/zcrypt: support for extended number of ap domains
Extends the number of ap domains within the zcrypt device driver up to 256.
AP domains in the range 00..255 will be detected.

Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-25 10:51:57 +02:00
Kirill Tkhai
f139caf2e8 sched, cleanup, treewide: Remove set_current_state(TASK_RUNNING) after schedule()
schedule(), io_schedule() and schedule_timeout() always return
with TASK_RUNNING state set, so one more setting is unnecessary.

(All places in patch are visible good, only exception is
 kiblnd_scheduler() from:

      drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c

 Its schedule() is one line above standard 3 lines of unified diff)

No places where set_current_state() is used for mb().

Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1410529254.3569.23.camel@tkhai
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Anil Belur <askb23@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: David Howells <dhowells@redhat.com>
Cc: Dmitry Eremin <dmitry.eremin@intel.com>
Cc: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Isaac Huang <he.huang@intel.com>
Cc: James E.J. Bottomley <JBottomley@parallels.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Liang Zhen <liang.zhen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Masaru Nomura <massa.nomura@gmail.com>
Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleg Drokin <green@linuxhacker.ru>
Cc: Peng Tao <bergwolf@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Ursula Braun <ursula.braun@de.ibm.com>
Cc: Zi Shen Lim <zlim.lnx@gmail.com>
Cc: devel@driverdev.osuosl.org
Cc: dm-devel@redhat.com
Cc: dri-devel@lists.freedesktop.org
Cc: fcoe-devel@open-fcoe.org
Cc: jfs-discussion@lists.sourceforge.net
Cc: linux390@de.ibm.com
Cc: linux-afs@lists.infradead.org
Cc: linux-cris-kernel@axis.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-nfs@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-raid@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: qla2xxx-upstream@qlogic.com
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: user-mode-linux-user@lists.sourceforge.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-19 12:35:17 +02:00
Linus Torvalds
35af25616c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
 "A bug fix for the vdso code, the loadparm for booting from SCSI is
  added and the access permissions for the dasd module parameters are
  corrected"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/vdso: remove NULL pointer check from clock_gettime
  s390/ipl: Add missing SCSI loadparm attributes to /sys/firmware
  s390/dasd: Make module parameter visible in sysfs
2014-09-08 08:27:00 -07:00
Linus Torvalds
b531f5dd9c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix skb leak in mac802154, from Martin Townsend

 2) Use select not depends on NF_NAT for NFT_NAT, from Pablo Neira
    Ayuso

 3) Fix union initializer bogosity in vxlan, from Gerhard Stenzel

 4) Fix RX checksum configuration in stmmac driver, from Giuseppe
    CAVALLARO

 5) Fix TSO with non-accelerated VLANs in e1000, e1000e, bna, ehea,
    i40e, i40evf, mvneta, and qlge, from Vlad Yasevich

 6) Fix capability checks in phy_init_eee(), from Giuseppe CAVALLARO

 7) Try high order allocations more sanely for SKBs, specifically if a
    high order allocation fails, fall back directly to zero order pages
    rather than iterating down one order at a time.  From Eric Dumazet

 8) Fix a memory leak in openvswitch, from Li RongQing

 9) amd-xgbe initializes wrong spinlock, from Thomas Lendacky

10) RTNL locking was busted in setsockopt for anycast and multicast, fix
    from Sabrina Dubroca

11) Fix peer address refcount leak in ipv6, from Nicolas Dichtel

12) DocBook typo fixes, from Masanari Iida

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits)
  ipv6: restore the behavior of ipv6_sock_ac_drop()
  amd-xgbe: Enable interrupts for all management counters
  amd-xgbe: Treat certain counter registers as 64 bit
  greth: moved TX ring cleaning to NAPI rx poll func
  cnic : Cleanup CONFIG_IPV6 & VLAN check
  net: treewide: Fix typo found in DocBook/networking.xml
  bnx2x: Fix link problems for 1G SFP RJ45 module
  3c59x: avoid panic in boomerang_start_xmit when finding page address:
  netfilter: add explicit Kconfig for NETFILTER_XT_NAT
  ipv6: use addrconf_get_prefix_route() to remove peer addr
  ipv6: fix a refcnt leak with peer addr
  net-timestamp: only report sw timestamp if reporting bit is set
  drivers/net/fddi/skfp/h/skfbi.h: Remove useless PCI_BASE_2ND macros
  l2tp: fix race while getting PMTU on PPP pseudo-wire
  ipv6: fix rtnl locking in setsockopt for anycast and multicast
  VMXNET3: Check for map error in vmxnet3_set_mc
  openvswitch: distinguish between the dropped and consumed skb
  amd-xgbe: Fix initialization of the wrong spin lock
  openvswitch: fix a memory leak
  netfilter: fix missing dependencies in NETFILTER_XT_TARGET_LOG
  ...
2014-09-07 19:56:38 -07:00
Eugene Crosser
511c24456a qeth: don't query for info if hardware not ready.
When qeth device is queried for ethtool data, hardware operation
is performed to extract the necessary information from the card.
If the card is not online at the moment (e.g. it is undergoing
recovery), this operation produces undesired effects like
temporarily freezing the system. This patch prevents execution
of the hardware query operation when the card is not online.
In such case, ioctl() operation returns error with errno ENODEV.

Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 13:54:06 -07:00
Peter Oberparleiter
3b1269350b s390/dasd: Make module parameter visible in sysfs
Change the visibility of the dasd parameter of kernel module dasd_mod
to be consistent with the eer_pages parameter.

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-01 09:56:28 +02:00
Christoph Lameter
0bf7fcf155 s390: cio driver &__get_cpu_var replacements
Use this_cpu_ptr() instead of &__get_cpu_var()

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26 13:45:52 -04:00
Martin Schwidefsky
b8a2bbdf02 s390/sclp: remove unnecessary XTABS flag
The sclp line mode terminal driver scans the tty output for '\t',
there is no need to set the XTABS flag in c_oflag.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-08-15 09:01:20 +02:00
Martin Schwidefsky
e512d56c79 s390/3215: fix tty output containing tabs
git commit 37f81fa1f6
"n_tty: do O_ONLCR translation as a single write"
surfaced a bug in the 3215 device driver. In combination this
broke tab expansion for tty ouput.

The cause is an asymmetry in the behaviour of tty3215_ops->write
vs tty3215_ops->put_char. The put_char function scans for '\t'
but the write function does not.

As the driver has logic for the '\t' expansion remove XTABS
from c_oflag of the initial termios as well.

Reported-by: Stephen Powell <zlinuxman@wowway.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-08-15 09:01:17 +02:00
Linus Torvalds
ebb067d2f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "Mostly cleanups and bug-fixes, with two exceptions.

  The first is lazy flushing of I/O-TLBs for PCI to improve performance,
  the second is software dirty bits in the pmd for the madvise-free
  implementation"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits)
  s390/locking: Reenable optimistic spinning
  s390/mm: implement dirty bits for large segment table entries
  KVM: s390/mm: Fix page table locking vs. split pmd lock
  s390/dasd: fix camel case
  s390/3215: fix hanging console issue
  s390/irq: improve displayed interrupt order in /proc/interrupts
  s390/seccomp: fix error return for filtered system calls
  s390/pci: introduce lazy IOTLB flushing for DMA unmap
  dasd: fix error recovery for alias devices during format
  dasd: fix list_del corruption during format
  dasd: fix unresponsive device during format
  dasd: use aliases for formatted devices during format
  s390/pci: fix kmsg component
  s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE
  s390/watchdog: Fix module name in Kconfig help text
  s390/dasd: replace seq_printf by seq_puts
  s390/dasd: replace pr_warning by pr_warn
  s390/dasd: Move EXPORT_SYMBOL after function/variable
  s390/dasd: remove unnecessary null test before debugfs_remove
  s390/zfcp: use qdio buffer helpers
  ...
2014-08-07 08:41:00 -07:00
Linus Torvalds
6b22df74f7 SCSI misc on 20140806
This patch set consists of the usual driver updates (ufs, storvsc, pm8001
 hpsa).  It also has removal of the user space target driver code (everyone is
 using LIO now), a partial PCI MSI-X update, more multi-queue updates,
 conversion to 64 bit LUNs (so we could theoretically cope with any LUN
 returned by a device) and placeholder support for the ZBC device type (Shingle
 drives), plus an assortment of minor updates and bug fixes.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJT4mS9AAoJEDeqqVYsXL0Mq34H/2AeXiM8GEVO3PIsBtF3TFZ9
 poJvAyb8t//+VwAIVLHU9wrssIrIcyvNQmNHH/InGt5rOaXwGQRsnEc73bBtot4b
 aC1t+hAnp2Ddvu6phmyUg7iY2GmQhAoZmeaj7krGIu2XgtLGiPg26eSsgk4Yv/U9
 cuULEuOc/UnTj3w5VK8SvpyXMybVF6oQhSrS1slOglfFwPTlTI/NHU9xo7Wc3qHT
 VifHXNphIvye5EH8zwtKX5p8qCrFW0pevJwyfPz7Hp2CTA9XYKx3SoeOh+n9F9ez
 udBBggg7Vb1tb4mPKUoZ78UrtCVdFSCmesBU/RJe7cIh8daKaO5MVr3WPSx2JhM=
 =yGai
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This patch set consists of the usual driver updates (ufs, storvsc,
  pm8001 hpsa).  It also has removal of the user space target driver
  code (everyone is using LIO now), a partial PCI MSI-X update, more
  multi-queue updates, conversion to 64 bit LUNs (so we could
  theoretically cope with any LUN returned by a device) and placeholder
  support for the ZBC device type (Shingle drives), plus an assortment
  of minor updates and bug fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (143 commits)
  scsi: do not issue SCSI RSOC command to Promise Vtrak E610f
  vmw_pvscsi: Use pci_enable_msix_exact() instead of pci_enable_msix()
  pm8001: Fix invalid return when request_irq() failed
  lpfc: Remove superfluous call to pci_disable_msix()
  isci: Use pci_enable_msix_exact() instead of pci_enable_msix()
  bfa: Use pci_enable_msix_exact() instead of pci_enable_msix()
  bfa: Cleanup bfad_setup_intr() function
  bfa: Do not call pci_enable_msix() after it failed once
  fnic: Use pci_enable_msix_exact() instead of pci_enable_msix()
  scsi: use short driver name for per-driver cmd slab caches
  scsi_debug: support scsi-mq, queues and locks
  Drivers: add blist flags
  scsi: ufs: fix endianness sparse warnings
  scsi: ufs: make undeclared functions static
  bnx2i: Update driver version to 2.7.10.1
  pm8001: fix a memory leak in nvmd_resp
  pm8001: fix update_flash
  pm8001: fix a memory leak in flash_update
  pm8001: Cleaning up uninitialized variables
  pm8001: Fix to remove null pointer checks that could never happen
  ...
2014-08-06 20:10:32 -07:00
Stefan Haberland
a94fa15429 s390/dasd: fix camel case
Rename enable_PAV to enable_pav.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-08-01 11:16:18 +02:00
Martin Schwidefsky
26d766c60f s390/3215: fix hanging console issue
The ccw_device_start in raw3215_start_io can fail. raw3215_try_io
does not check if the request could be started and removes any
pending timer. This can leave the system in a hanging state.
Check for pending request after raw3215_start_io and start a
timer if necessary.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-28 10:02:39 +02:00
David S. Miller
8fd90bb889 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/infiniband/hw/cxgb4/device.c

The cxgb4 conflict was simply overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22 00:44:59 -07:00
Stefan Haberland
29b8dd9d42 dasd: fix error recovery for alias devices during format
Kernel panic or a hanging device during format if an alias device is
set offline or I/O errors occur.

Omit the error recovery procedure for alias devices and do retries on
the base device with full erp.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:23 +02:00
Stefan Haberland
8fa56aed12 dasd: fix list_del corruption during format
If I/O errors occur during format a kernel panic with a list_del
corruption may occur.

Stop error recovery procedure after an erp action was taken.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:23 +02:00
Stefan Haberland
931a3dce81 dasd: fix unresponsive device during format
If path events occur the formatting process stucks because path
events may flush format requests from the queue.

Kick the format process after path events are handled.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:22 +02:00
Stefan Haberland
daa991bf30 dasd: use aliases for formatted devices during format
Formatting of a previously formatted device is slower than newly
format a device when alias devices are available.
For already formatted devices the alias devices are not used for
formatting.

Fix the alias handling for already formatted devices.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:21 +02:00
Fabian Frederick
c794caf9cb s390/dasd: replace seq_printf by seq_puts
Fix checkpatch warnings:
"WARNING: Prefer seq_puts to seq_printf"

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:18 +02:00
Fabian Frederick
4ce259664e s390/dasd: replace pr_warning by pr_warn
Fix checkpatch warning:
"WARNING: Prefer pr_warn(... to pr_warning(..."
+ coalesce formats.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:18 +02:00
Fabian Frederick
7048a2b532 s390/dasd: Move EXPORT_SYMBOL after function/variable
Fix checkpatch warnings:
"WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable"

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:17 +02:00
Fabian Frederick
d7309aaadd s390/dasd: remove unnecessary null test before debugfs_remove
This fixes checkpatch warning:
"WARNING: debugfs_remove(NULL) is safe this check is probably not required"

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:16 +02:00
Sebastian Ott
852eb1aa2b s390/zfcp: use qdio buffer helpers
Use qdio buffer helpers to manage the buffers used for the request
and response queues.

No functional change.

Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:16 +02:00
Sebastian Ott
d445a4e28c s390/qeth: extract qdio buffers from output buffer struct
Because of the embedded qdio_buffer array struct qeth_qdio_out_q is
quite large resulting in an order 4 allocation. This is likely to
fail at runtime and wastes a lot of memory since the actual size is
just about 34K.

Since there is no need for this buffer to be contiguous split it up
using qdio buffer helpers.

Reported-by: Neale Ferguson <neale@sinenomine.net>
Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:15 +02:00
Sebastian Ott
6d284bde2b s390/qeth: extract qdio buffers from input buffer struct
Because of the embedded qdio_buffer array struct qeth_qdio_q is quite
large resulting in an order 4 allocation. This is likely to fail at
runtime and wastes a lot of memory since the actual size is just
about 36K.

Since there is no need for this buffer to be contiguous split it up
using qdio buffer helpers.

Reported-by: Neale Ferguson <neale@sinenomine.net>
Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:14 +02:00
Sebastian Ott
4601ba6c92 s390/qeth: qdio queue helpers
Get rid of duplicated code by introducing some helpers to allocate
and free qdio queues used by qeth for its input and completion queue.

No functional change.

Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:14 +02:00
Sebastian Ott
5245c924c2 s390/qdio: add helpers to manage qdio buffers
Users of qdio buffers employ different strategies to manage these
buffers. The qeth driver uses huge contiguous buffers which leads
to high order allocations with all their downsides.

This patch provides helpers to allocate, free, and reset arrays of
qdio buffers using non contiguous pages.

Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:13 +02:00
Stefan Raspl
45cbb2e499 qeth: Display adjacent switch attributes
Add support to display the adjacent switch port's forwarding
attributes. Currently supports info on forwarding modes '802.1'
and 'rr' (reflective relay).

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-21 20:21:40 -07:00
Hannes Reinecke
9cb78c16f5 scsi: use 64-bit LUNs
The SCSI standard defines 64-bit values for LUNs, and large arrays
employing large or hierarchical LUN numbers become more and more
common.

So update the linux SCSI stack to use 64-bit LUN numbers.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-17 22:07:37 +02:00
Ingo Tuchscherer
666e68e0dd s390/zcrypt: improve device probing for zcrypt adapter cards
Improve device probing process for zcrypt adapters to
transmit service request during registration process.

Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-16 10:48:12 +02:00
Martin Schwidefsky
7cbe4afe85 s390/3270: correct size detection with the read-partition command
The size detection for 3270 terminals with the read-partition command is
broken. The raw3270_reset_device_cb function clears the init_data array,
but if raw3270_writesf_readpart has been called the read-partition command
is queued which needs the init_data array. In this case the size detection
will fail and the invalid command does funny things to the terminal.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-16 10:48:10 +02:00
Tom Gundersen
c835a67733 net: set name_assign_type in alloc_netdev()
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert
all users to pass NET_NAME_UNKNOWN.

Coccinelle patch:

@@
expression sizeof_priv, name, setup, txqs, rxqs, count;
@@

(
-alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs)
+alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs)
|
-alloc_netdev_mq(sizeof_priv, name, setup, count)
+alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count)
|
-alloc_netdev(sizeof_priv, name, setup)
+alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup)
)

v9: move comments here from the wrong commit

Signed-off-by: Tom Gundersen <teg@jklm.no>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 16:12:48 -07:00
Linus Torvalds
7a8e9c8088 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 patches from Martin Schwidefsky:
 "A couple of bug fixes, a debug change for qdio, an update for the
  default config, and one small extension.

  The watchdog module based on diagnose 0x288 is converted to the
  watchdog API and it now works under LPAR as well"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ccwgroup: use ccwgroup_ungroup wrapper
  s390/ccwgroup: fix an uninitialized return code
  s390/ccwgroup: obtain extra reference for asynchronous processing
  qdio: Keep device-specific dbf entries
  s390/compat: correct ucontext layout for high gprs
  s390/cio: set device name as early as possible
  s390: update default configuration
  s390: avoid format strings leaking into names
  s390/airq: silence lockdep warning
  s390/watchdog: add support for LPAR operation (diag288)
  s390/watchdog: use watchdog API
  s390/sclp_vt220: Enable ASCII console per default
  s390/qdio: replace shift loop by ilog2
  s390/cio: silence lockdep warning
  s390/uaccess: always load the kernel ASCE after task switch
  s390/ap_bus: Make modules parameters visible in sysfs
2014-06-21 06:47:01 -10:00
Sebastian Ott
fa73eb4738 s390/ccwgroup: use ccwgroup_ungroup wrapper
To ungroup and deregister the group device always use the
ccwgroup_ungroup wrapper.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16 10:32:52 +02:00
Sebastian Ott
0310c8b582 s390/ccwgroup: fix an uninitialized return code
Since commit 0b60f9ead5
"s390: use device_remove_file_self() instead of device_schedule_callback()"
the return code of ccwgroup_ungroup_store is uninitialized. Make
sure the rc is always initialized.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16 10:32:38 +02:00
Sebastian Ott
9280ddb194 s390/ccwgroup: obtain extra reference for asynchronous processing
Commit 0b60f9ead5
"s390: use device_remove_file_self() instead of device_schedule_callback()"
changed ccwgroup to use an extra work queue instead of
device_schedule_callback. This function obtained an extra device
reference for its async work which is missing in the new implementation
and results in a "freeing memory with a lock still held" BUG. Fix
this by obtaining an extra reference for the async work.

Reported-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16 10:32:24 +02:00
Stefan Raspl
613c4e0459 qdio: Keep device-specific dbf entries
Keep the per-device dbf entries until module is removed, with
proper error checking for debug feature setup.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16 10:31:58 +02:00
Sebastian Ott
2c3e7e15c7 s390/cio: set device name as early as possible
Currently we set the device name at the time we call device_add after
we receive the interrupt for the first I/O. When something is not working
as expected during that first I/O (e.g. we don't receive an interrupt) we
print a message including the device name which has not yet been
initialized.

Set the device name after calling device_initialize (prior to starting
the first I/O) so that we have the name present if some unexpected error
occurs during that first I/O.

Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reported-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16 10:31:03 +02:00
Linus Torvalds
f9da455b93 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.

 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
    Benniston.

 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
    Mork.

 4) BPF now has a "random" opcode, from Chema Gonzalez.

 5) Add more BPF documentation and improve test framework, from Daniel
    Borkmann.

 6) Support TCP fastopen over ipv6, from Daniel Lee.

 7) Add software TSO helper functions and use them to support software
    TSO in mvneta and mv643xx_eth drivers.  From Ezequiel Garcia.

 8) Support software TSO in fec driver too, from Nimrod Andy.

 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.

10) Handle broadcasts more gracefully over macvlan when there are large
    numbers of interfaces configured, from Herbert Xu.

11) Allow more control over fwmark used for non-socket based responses,
    from Lorenzo Colitti.

12) Do TCP congestion window limiting based upon measurements, from Neal
    Cardwell.

13) Support busy polling in SCTP, from Neal Horman.

14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.

15) Bridge promisc mode handling improvements from Vlad Yasevich.

16) Don't use inetpeer entries to implement ID generation any more, it
    performs poorly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
  tcp: fixing TLP's FIN recovery
  net: fec: Add software TSO support
  net: fec: Add Scatter/gather support
  net: fec: Increase buffer descriptor entry number
  net: fec: Factorize feature setting
  net: fec: Enable IP header hardware checksum
  net: fec: Factorize the .xmit transmit function
  bridge: fix compile error when compiling without IPv6 support
  bridge: fix smatch warning / potential null pointer dereference
  via-rhine: fix full-duplex with autoneg disable
  bnx2x: Enlarge the dorq threshold for VFs
  bnx2x: Check for UNDI in uncommon branch
  bnx2x: Fix 1G-baseT link
  bnx2x: Fix link for KR with swapped polarity lane
  sctp: Fix sk_ack_backlog wrap-around problem
  net/core: Add VF link state control policy
  net/fsl: xgmac_mdio is dependent on OF_MDIO
  net/fsl: Make xgmac_mdio read error message useful
  net_sched: drr: warn when qdisc is not work conserving
  ...
2014-06-12 14:27:40 -07:00
Linus Torvalds
5c02c392cd Main excitement is a virtio_scsi fix for alloc holding spinlock on the abort
path, which I refuse to CC stable since (1) I discovered it myself, and
 (2) it's been there forever with no reports.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTmRNwAAoJENkgDmzRrbjxfkQP/25Xjr1T6d9wR3ZRbJ2LRDX1
 hwwwuFeYJMe5KZBqsA2gNeRqbrbW8S9t4ClyjXj2AZsC1XPi5zQbzXfm77HqRpKO
 KCQ7YoIyLsrtHfKtdKrOK5qiwuns3AsKn988Yy6HkZ94/D6tp8urINdEZg5xtw6z
 zbgTmv5kSEoY/+D6SmSIN9CT0gJNmIRG5bkDDijhxIHUi9oTFvkG4Rvhtgsdfivm
 3vOOnyzD+oXEj7Jzpz4j2D1m8C134uRE67psmAp5zADxDKr66df62YKGBrZJFs45
 1Tjr0KancMDXDr8ZWNsmShFnzfailK87KycQbxLoNBvY0wAZZ2H7iS+2Xmid9ee+
 feBF6FxBZgmkLnWxlybNy5hJmXKWmM3Hz4p4QZ59N4cEFL6vRGdXiZLCzNFxHyaj
 p5VggFyhB/fjYfYtmlT8GS4K8M5wfySgfMxDPLYrASzSnx7xFxS3LZPBSPEEgM2q
 +ivoRBCM5cXdRJUSsS/MdbixAGl0seHR3+KzOGE1ZbU1YQoKA1c9Ci9dTs1REEhS
 KSL9I2rb0AcnHwhOC3wUOEi1Y7fi0rf4KywWuT6kkA5OrDZIhb0ZrH6CPnBBWabK
 7bEq782tF6tIJP9rpMAeNwztRt2GcFhdc54ZLesw9xFoJdf2TPTC0XF+jG1iji5L
 Nboz+428hzrGarIilHBH
 =YCNa
 -----END PGP SIGNATURE-----

Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull virtio updates from Rusty Russell:
 "Main excitement is a virtio_scsi fix for alloc holding spinlock on the
  abort path, which I refuse to CC stable since (1) I discovered it
  myself, and (2) it's been there forever with no reports"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_scsi: don't call virtqueue_add_sgs(... GFP_NOIO) holding spinlock.
  virtio-rng: fixes for device registration/unregistration
  virtio-rng: fix boot with virtio-rng device
  virtio-rng: support multiple virtio-rng devices
  virtio_ccw: introduce device_lost in virtio_ccw_device
  virtio: virtio_break_device() to mark all virtqueues broken.
2014-06-11 21:10:33 -07:00
Kees Cook
ef283688f5 s390: avoid format strings leaking into names
This makes sure format strings can't accidentally leak into kernel
interface names.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-11 10:13:27 +02:00
Sebastian Ott
0eb69a0c58 s390/airq: silence lockdep warning
airq_iv_(alloc|free) is called by some users with interrupts enabled
and by some with interrupts disabled which leads to the following
lockdep warning:

[ INFO: possible irq lock inversion dependency detected ]
3.14.0-15249-gbf29b7b-dirty #25 Not tainted
---------------------------------------------------------
insmod/2108 just changed the state of lock:
 (&(&iv->lock)->rlock){+.....}, at: [<000000000046ee3e>] airq_iv_alloc+0x62/0x228
but this lock was taken by another, HARDIRQ-READ-safe lock in the past:
 (&info->lock){.-.-..}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&iv->lock)->rlock);
                               local_irq_disable();
                               lock(&info->lock);
                               lock(&(&iv->lock)->rlock);
  <Interrupt>
    lock(&info->lock);

 *** DEADLOCK ***

Although this is a false alarm (since each airq user consistently
calls these functions from the same context) fix this by ensuring
that interrupts are disabled when the airq lock is held.

Reported-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10 10:48:30 +02:00
Philipp Hachtmann
f7a94db4e9 s390/watchdog: use watchdog API
Converted the vmwatchdog driver to use the kernel's watchdog API.

Signed-off-by: Philipp Hachtmann <phacht@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10 10:48:29 +02:00
Peter Oberparleiter
f2485f5d1c s390/sclp_vt220: Enable ASCII console per default
When you want to use the HMC's ASCII console as console device for
a z/VM guest you have to specify console=ttyS1 on the kernel command
line. But it won't work until you specify conmode=sclp as well.

This behavior is inconsistent with the use of the ASCII console as
TTY device which works on z/VM without the need to specify a conmode.

Fix this inconsistency by removing the check for conmode=sclp in the
ASCII console registration function.

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10 10:48:29 +02:00
Fabian Frederick
92bdae5d9c s390/qdio: replace shift loop by ilog2
account_sbals is called by get_inbound_buffer_frontier and
get_outbound_buffer_frontier with 'count' value > 0 so we can safely
convert shift loop to ilog2.

Cc: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10 10:48:28 +02:00
Sebastian Ott
dbe33fc9ad s390/cio: silence lockdep warning
On systems where a ccw based console device is used a lockdep false alarm
could be triggered when a device driver calls printk while holding a
subchannels lock (e.g. in it's irq handler). Since this is valid behavior
fix this by introducing a separate lock class for the console subchannels
lock.

The lockdep warning was revealed by "printk: enable interrupts before calling
console_trylock_for_printk()" which changed console_unlock() to be called with
lockdep enabled.

[ INFO: possible recursive locking detected ]
3.15.0-rc5-next-20140520 #1 Not tainted
---------------------------------------------
ccwgroup/2239 is trying to acquire lock:
(&(sch->lock)->rlock){-.-...}, at: [<0000000000642a52>] raw3215_write+0x52/0x200

but task is already holding lock:
(&(sch->lock)->rlock){-.-...}, at: [<00000000005fd160>] do_cio_interrupt+0x60/0x108

other info that might help us debug this:
Possible unsafe locking scenario:

CPU0
----
lock(&(sch->lock)->rlock);
lock(&(sch->lock)->rlock);

*** DEADLOCK ***

May be due to missing lock nesting notation

8 locks held by ccwgroup/2239:

stack backtrace:
CPU: 3 PID: 2239 Comm: ccwgroup Not tainted 3.15.0-rc5-next-20140520 #1
0000000036fab518 0000000036fab528 0000000000000002 0000000000000000
0000000036fab5b8 0000000036fab530 0000000036fab530 00000000001116e8
0000000000000000 0000000000986ec4 00000000009701b6 000000000000000b
0000000036fab578 0000000036fab518 0000000000000000 0000000000000000
0000000000000000 00000000001116e8 0000000036fab518 0000000036fab578
Call Trace:
([<0000000000111626>] show_trace+0x14e/0x158)
[<000000000011169a>] show_stack+0x6a/0xe8
[<00000000007c6e72>] dump_stack+0x82/0xb0
[<00000000001a95f2>] validate_chain.isra.37+0xa4a/0xbb0
[<00000000001acaca>] __lock_acquire+0x4da/0xcd0
[<00000000001ada1a>] lock_acquire+0xba/0x218
[<00000000007cd634>] _raw_spin_lock_irqsave+0x6c/0xb8
[<0000000000642a52>] raw3215_write+0x52/0x200
[<0000000000643d16>] con3215_write+0x76/0xf8
[<00000000001bd87a>] call_console_drivers.constprop.25+0xfa/0x210
[<00000000001be0b0>] console_unlock+0x3e0/0x4e8
[<00000000001be450>] vprintk_emit+0x298/0x6e0
[<00000000005aa210>] dev_vprintk_emit+0xe0/0x1a8
[<00000000005aa320>] dev_printk_emit+0x48/0x50
[<00000000005aa390>] __dev_printk+0x68/0xb0
[<00000000005aa7c2>] _dev_info+0x62/0x70
[<0000000000657bf0>] qeth_l2_send_setmac_cb+0xd0/0x190
[<0000000000651a1e>] qeth_send_control_data_cb+0x3a6/0x6a8
[<0000000000655546>] qeth_irq+0x1a6/0xac0
[<000000000060a0ac>] ccw_device_call_handler+0xa4/0xc0
[<0000000000608b62>] ccw_device_irq+0x5a/0x190
[<00000000005fd1ca>] do_cio_interrupt+0xca/0x108
[<00000000001c0a2e>] handle_irq_event_percpu+0x5e/0x378
[<00000000001c46fc>] handle_percpu_irq+0x6c/0x98
[<00000000001c0066>] generic_handle_irq+0x46/0x68
[<000000000010b5b6>] do_IRQ+0x5e/0x88
[<00000000007cf304>] io_call+0x6/0x20
[<000000000064c63a>] qeth_send_control_data+0x322/0x570
([<000000000064c50e>] qeth_send_control_data+0x1f6/0x570)
[<0000000000651db2>] qeth_send_ipa_cmd+0x92/0x120
[<000000000065b310>] __qeth_l2_set_online+0x170/0xaa8
[<000000000060ebb6>] ccwgroup_set_online+0x56/0x90
[<000000000060ef96>] ccwgroup_online_store+0xd6/0xe0
[<000000000033d11a>] kernfs_fop_write+0x10a/0x188
[<00000000002bbd00>] vfs_write+0x98/0x1c0
[<00000000002bc8a0>] SyS_write+0x60/0xd0
[<00000000007cee3a>] sysc_nr_ok+0x22/0x28
[<000003fffd0c3f28>] 0x3fffd0c3f28

Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10 10:48:28 +02:00
Michael Veigel
c1a42f49b2 s390/ap_bus: Make modules parameters visible in sysfs
Change the visibility of the module parameters ap_domain_index and
ap_thread_flag for the owner and the members of the owners group in
sysfs.

Previously the parameters where invisible due to a value of zero
as permissions parameter in the module_param_named macro.

Signed-off-by: Michael Veigel <veigel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10 10:48:27 +02:00