mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 02:45:17 +07:00
f9cf36fcaf
368 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Thomas Gleixner
|
457c899653 |
treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Dan Williams
|
e900a918b0 |
mm: shuffle initial free memory to improve memory-side-cache utilization
Patch series "mm: Randomize free memory", v10.
This patch (of 3):
Randomization of the page allocator improves the average utilization of
a direct-mapped memory-side-cache. Memory side caching is a platform
capability that Linux has been previously exposed to in HPC
(high-performance computing) environments on specialty platforms. In
that instance it was a smaller pool of high-bandwidth-memory relative to
higher-capacity / lower-bandwidth DRAM. Now, this capability is going
to be found on general purpose server platforms where DRAM is a cache in
front of higher latency persistent memory [1].
Robert offered an explanation of the state of the art of Linux
interactions with memory-side-caches [2], and I copy it here:
It's been a problem in the HPC space:
http://www.nersc.gov/research-and-development/knl-cache-mode-performance-coe/
A kernel module called zonesort is available to try to help:
https://software.intel.com/en-us/articles/xeon-phi-software
and this abandoned patch series proposed that for the kernel:
https://lkml.kernel.org/r/20170823100205.17311-1-lukasz.daniluk@intel.com
Dan's patch series doesn't attempt to ensure buffers won't conflict, but
also reduces the chance that the buffers will. This will make performance
more consistent, albeit slower than "optimal" (which is near impossible
to attain in a general-purpose kernel). That's better than forcing
users to deploy remedies like:
"To eliminate this gradual degradation, we have added a Stream
measurement to the Node Health Check that follows each job;
nodes are rebooted whenever their measured memory bandwidth
falls below 300 GB/s."
A replacement for zonesort was merged upstream in commit
|
||
David Hildenbrand
|
ac5c942645 |
mm/memory_hotplug: make __remove_pages() and arch_remove_memory() never fail
All callers of arch_remove_memory() ignore errors. And we should really try to remove any errors from the memory removal path. No more errors are reported from __remove_pages(). BUG() in s390x code in case arch_remove_memory() is triggered. We may implement that properly later. WARN in case powerpc code failed to remove the section mapping, which is better than ignoring the error completely right now. Link: http://lkml.kernel.org/r/20190409100148.24703-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stefan Agner <stefan@agner.ch> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rob Herring <robh@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Qian Cai <cai@lca.pw> Cc: Mathieu Malaterre <malat@debian.org> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mike Travis <mike.travis@hpe.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Hildenbrand
|
9d1d887d78 |
mm/memory_hotplug: make __remove_section() never fail
Let's just warn in case a section is not valid instead of failing to remove somewhere in the middle of the process, returning an error that will be mostly ignored by callers. Link: http://lkml.kernel.org/r/20190409100148.24703-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Qian Cai <cai@lca.pw> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Mike Travis <mike.travis@hpe.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Hildenbrand
|
cb7b3a3685 |
mm/memory_hotplug: make unregister_memory_section() never fail
Failing while removing memory is mostly ignored and cannot really be handled. Let's treat errors in unregister_memory_section() in a nice way, warning, but continuing. Link: http://lkml.kernel.org/r/20190409100148.24703-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Mike Travis <mike.travis@hpe.com> Cc: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Qian Cai <cai@lca.pw> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Hildenbrand
|
d9eb1417c7 |
mm/memory_hotplug: release memory resource after arch_remove_memory()
Patch series "mm/memory_hotplug: Better error handling when removing memory", v1. Error handling when removing memory is somewhat messed up right now. Some errors result in warnings, others are completely ignored. Memory unplug code can essentially not deal with errors properly as of now. remove_memory() will never fail. We have basically two choices: 1. Allow arch_remov_memory() and friends to fail, propagating errors via remove_memory(). Might be problematic (e.g. DIMMs consisting of multiple pieces added/removed separately). 2. Don't allow the functions to fail, handling errors in a nicer way. It seems like most errors that can theoretically happen are really corner cases and mostly theoretical (e.g. "section not valid"). However e.g. aborting removal of sections while all callers simply continue in case of errors is not nice. If we can gurantee that removal of memory always works (and WARN/skip in case of theoretical errors so we can figure out what is going on), we can go ahead and implement better error handling when adding memory. E.g. via add_memory(): arch_add_memory() ret = do_stuff() if (ret) { arch_remove_memory(); goto error; } Handling here that arch_remove_memory() might fail is basically impossible. So I suggest, let's avoid reporting errors while removing memory, warning on theoretical errors instead and continuing instead of aborting. This patch (of 4): __add_pages() doesn't add the memory resource, so __remove_pages() shouldn't remove it. Let's factor it out. Especially as it is a special case for memory used as system memory, added via add_memory() and friends. We now remove the resource after removing the sections instead of doing it the other way around. I don't think this change is problematic. add_memory() register memory resource arch_add_memory() remove_memory arch_remove_memory() release memory resource While at it, explain why we ignore errors and that it only happeny if we remove memory in a different granularity as we added it. [david@redhat.com: fix printk warning] Link: http://lkml.kernel.org/r/20190417120204.6997-1-david@redhat.com Link: http://lkml.kernel.org/r/20190409100148.24703-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Qian Cai <cai@lca.pw> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Mike Travis <mike.travis@hpe.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
940519f0c8 |
mm, memory_hotplug: provide a more generic restrictions for memory hotplug
arch_add_memory, __add_pages take a want_memblock which controls whether the newly added memory should get the sysfs memblock user API (e.g. ZONE_DEVICE users do not want/need this interface). Some callers even want to control where do we allocate the memmap from by configuring altmap. Add a more generic hotplug context for arch_add_memory and __add_pages. struct mhp_restrictions contains flags which contains additional features to be enabled by the memory hotplug (MHP_MEMBLOCK_API currently) and altmap for alternative memmap allocator. This patch shouldn't introduce any functional change. [akpm@linux-foundation.org: build fix] Link: http://lkml.kernel.org/r/20190408082633.2864-3-osalvador@suse.de Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Oscar Salvador <osalvador@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
5557c766ab |
mm, memory_hotplug: cleanup memory offline path
check_pages_isolated_cb currently accounts the whole pfn range as being offlined if test_pages_isolated suceeds on the range. This is based on the assumption that all pages in the range are freed which is currently the case in most cases but it won't be with later changes, as pages marked as vmemmap won't be isolated. Move the offlined pages counting to offline_isolated_pages_cb and rely on __offline_isolated_pages to return the correct value. check_pages_isolated_cb will still do it's primary job and check the pfn range. While we are at it remove check_pages_isolated and offline_isolated_pages and use directly walk_system_ram_range as do in online_pages. Link: http://lkml.kernel.org/r/20190408082633.2864-2-osalvador@suse.de Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Oscar Salvador <osalvador@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Baoquan He
|
d3ba3ae197 |
mm/memory_hotplug.c: fix the wrong usage of N_HIGH_MEMORY
In node_states_check_changes_online(), N_HIGH_MEMORY is used to substitute
ZONE_HIGHMEM directly. This is not right. N_HIGH_MEMORY is to mark the
memory state of node. Here zone index is checked, which should be
compared with 'ZONE_HIGHMEM' accordingly.
Replace it with ZONE_HIGHMEM.
This is a code cleanup - no known runtime effects.
Link: http://lkml.kernel.org/r/20190320080732.14933-1-bhe@redhat.com
Fixes:
|
||
Oscar Salvador
|
39186cbe65 |
mm,memory_hotplug: drop redundant hugepage_migration_supported check
has_unmovable_pages() already checks whether the hugetlb page supports migration, so all non-migratable hugetlb pages should have been caught there. Let us drop the check from scan_movable_pages() as is redundant. Link: http://lkml.kernel.org/r/20190320152658.10855-3-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Oscar Salvador
|
10eeadf304 |
mm,memory_hotplug: unlock 1GB-hugetlb on x86_64
On x86_64, 1GB-hugetlb pages could never be offlined due to the fact that hugepage_migration_supported() returned false for PUD_SHIFT. So whenever we wanted to offline a memblock containing a gigantic hugetlb page, we never got beyond has_unmovable_pages() check. This changed with [1], where now we also return true for PUD_SHIFT. After that patch, the check in has_unmovable_pages() and scan_movable_pages() returned true, but we still had a final barrier in do_migrate_range(): if (compound_order(head) > PFN_SECTION_SHIFT) { ret = -EBUSY; break; } This is not really nice, and we do not really need it. It is perfectly possible to migrate a gigantic page as long as another node has a spare gigantic page for us. In alloc_huge_page_nodemask(), we calculate the __real__ number of free pages, and if any, we try to dequeue one from another node. This all works fine when we do have another node with a spare gigantic page, but if that is not the case, alloc_huge_page_nodemask() ends up calling alloc_migrate_huge_page() which bails out if the wanted page is gigantic. That is mainly because finding a 1GB (or even 16GB on powerpc) contiguous memory is quite unlikely when the system has been running for a while. In that situation, we will keep looping forever because scan_movable_pages() will give us the same page and we will fail again because there is no node where we can dequeue a gigantic page from. This is not nice, and it has been raised that we might want to treat -ENOMEM as a fatal error in do_migrate_range(), but this has to be checked further. Anyway, I would tend say that this is the administrator's job, to make sure that the system can keep up with the memory to be offlined, so that would mean that if we want to use gigantic pages, make sure that the other nodes have at least enough gigantic pages to keep up in case we need to offline memory. Just for the sake of completeness, this is one of the tests done: # echo 1 > /sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages # echo 1 > /sys/devices/system/node/node2/hugepages/hugepages-1048576kB/nr_hugepages # cat /sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages 1 # cat /sys/devices/system/node/node1/hugepages/hugepages-1048576kB/free_hugepages 1 # cat /sys/devices/system/node/node2/hugepages/hugepages-1048576kB/nr_hugepages 1 # cat /sys/devices/system/node/node2/hugepages/hugepages-1048576kB/free_hugepages 1 (hugetlb1gb is a program that maps 1GB region using MAP_HUGE_1GB) # numactl -m 1 ./hugetlb1gb # cat /sys/devices/system/node/node1/hugepages/hugepages-1048576kB/free_hugepages 0 # cat /sys/devices/system/node/node2/hugepages/hugepages-1048576kB/free_hugepages 1 # offline node1 memory # cat /sys/devices/system/node/node2/hugepages/hugepages-1048576kB/free_hugepages 0 [1] https://lore.kernel.org/patchwork/patch/998796/ Link: http://lkml.kernel.org/r/20190320152658.10855-2-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Hildenbrand
|
89c02e69fc |
mm/memory_hotplug.c: drop memory device reference after find_memory_block()
Right now we are using find_memory_block() to get the node id for the
pfn range to online. We are missing to drop a reference to the memory
block device. While the device still gets unregistered via
device_unregister(), resulting in no user visible problem, the device is
never released via device_release(), resulting in a memory leak. Fix
that by properly using a put_device().
Link: http://lkml.kernel.org/r/20190411110955.1430-1-david@redhat.com
Fixes:
|
||
Qian Cai
|
c4efe484b5 |
mm/memory_hotplug.c: fix notification in offline error path
When start_isolate_page_range() returned -EBUSY in __offline_pages(), it
calls memory_notify(MEM_CANCEL_OFFLINE, &arg) with an uninitialized
"arg". As the result, it triggers warnings below. Also, it is only
necessary to notify MEM_CANCEL_OFFLINE after MEM_GOING_OFFLINE.
page:ffffea0001200000 count:1 mapcount:0 mapping:0000000000000000
index:0x0
flags: 0x3fffe000001000(reserved)
raw: 003fffe000001000 ffffea0001200008 ffffea0001200008 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: unmovable page
WARNING: CPU: 25 PID: 1665 at mm/kasan/common.c:665
kasan_mem_notifier+0x34/0x23b
CPU: 25 PID: 1665 Comm: bash Tainted: G W 5.0.0+ #94
Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20
10/25/2017
RIP: 0010:kasan_mem_notifier+0x34/0x23b
RSP: 0018:ffff8883ec737890 EFLAGS: 00010206
RAX: 0000000000000246 RBX: ff10f0f4435f1000 RCX: f887a7a21af88000
RDX: dffffc0000000000 RSI: 0000000000000020 RDI: ffff8881f221af88
RBP: ffff8883ec737898 R08: ffff888000000000 R09: ffffffffb0bddcd0
R10: ffffed103e857088 R11: ffff8881f42b8443 R12: dffffc0000000000
R13: 00000000fffffff9 R14: dffffc0000000000 R15: 0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000560fbd31d730 CR3: 00000004049c6003 CR4: 00000000001606a0
Call Trace:
notifier_call_chain+0xbf/0x130
__blocking_notifier_call_chain+0x76/0xc0
blocking_notifier_call_chain+0x16/0x20
memory_notify+0x1b/0x20
__offline_pages+0x3e2/0x1210
offline_pages+0x11/0x20
memory_block_action+0x144/0x300
memory_subsys_offline+0xe5/0x170
device_offline+0x13f/0x1e0
state_store+0xeb/0x110
dev_attr_store+0x3f/0x70
sysfs_kf_write+0x104/0x150
kernfs_fop_write+0x25c/0x410
__vfs_write+0x66/0x120
vfs_write+0x15a/0x4f0
ksys_write+0xd2/0x1b0
__x64_sys_write+0x73/0xb0
do_syscall_64+0xeb/0xb78
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f14f75cc3b8
RSP: 002b:00007ffe84d01d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007f14f75cc3b8
RDX: 0000000000000008 RSI: 0000563f8e433d70 RDI: 0000000000000001
RBP: 0000563f8e433d70 R08: 000000000000000a R09: 00007ffe84d018f0
R10: 000000000000000a R11: 0000000000000246 R12: 00007f14f789e780
R13: 0000000000000008 R14: 00007f14f7899740 R15: 0000000000000008
Link: http://lkml.kernel.org/r/20190320204255.53571-1-cai@lca.pw
Fixes:
|
||
Qian Cai
|
9b7ea46a82 |
mm/hotplug: fix offline undo_isolate_page_range()
Commit |
||
Linus Torvalds
|
f67e3fb489 |
device-dax for 5.1
* Replace the /sys/class/dax device model with /sys/bus/dax, and include a compat driver so distributions can opt-in to the new ABI. * Allow for an alternative driver for the device-dax address-range * Introduce the 'kmem' driver to hotplug / assign a device-dax address-range to the core-mm. * Arrange for the device-dax target-node to be onlined so that the newly added memory range can be uniquely referenced by numa apis. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJchWpGAAoJEB7SkWpmfYgCJk8P/0Q1DINszUDO/vKjJ09cDs9P Jw3it6GBIL50rDOu9QdcprSpwYDD0h1mLAV/m6oa3bVO+p4uWGvnxaxRx2HN2c/v vhZFtUDpHlqR63vzWMNVKRprYixCRJDUr6xQhhCcE3ak/ELN6w7LWfikKVWv15UL MfR96IQU38f+xRda/zSXnL9606Dvkvu/inEHj84lRcHIwj3sQAUalrE8bR3O32gZ bDg/l5kzT49o8ZXUo/TegvRSSSZpJmOl2DD0RW+ax5q3NI2bOXFrVDUKBKxf/hcQ E/V9i57TrqQx0GqRhnU7rN/v53cFZGGs31TEEIB/xs3bzCnADxwXcjL5b5K005J6 vJjBA2ODBewHFK3uVx46Hy1iV4eCtZWj4QrMnrjdSrjXOfbF5GTbWOhPFgoq7TWf S7VqFEf3I2gDPaMq4o8Ej1kLH4HMYeor2NSOZjyvGn87rSZ3ZIQguwbaNIVl+itz gdDt0ZOU0BgOBkV+rZIeZDaGdloWCHcDPL15CkZaOZyzdWhfEZ7dod6ad+9udilU EUPH62RgzXZtfm5zpebYyjNVLbb9pLZ0nT+UypyGR6zqWx1SqU3mXi63NFXPco+x XA9j//edPeI6NHg2CXLEh8DLuCg3dG1zWRJANkiF+niBwyCR8CHtGWAoY6soXbKe 2UrXGcIfXxyJ8V9v8v4q =hfa3 -----END PGP SIGNATURE----- Merge tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull device-dax updates from Dan Williams: "New device-dax infrastructure to allow persistent memory and other "reserved" / performance differentiated memories, to be assigned to the core-mm as "System RAM". Some users want to use persistent memory as additional volatile memory. They are willing to cope with potential performance differences, for example between DRAM and 3D Xpoint, and want to use typical Linux memory management apis rather than a userspace memory allocator layered over an mmap() of a dax file. The administration model is to decide how much Persistent Memory (pmem) to use as System RAM, create a device-dax-mode namespace of that size, and then assign it to the core-mm. The rationale for device-dax is that it is a generic memory-mapping driver that can be layered over any "special purpose" memory, not just pmem. On subsequent boots udev rules can be used to restore the memory assignment. One implication of using pmem as RAM is that mlock() no longer keeps data off persistent media. For this reason it is recommended to enable NVDIMM Security (previously merged for 5.0) to encrypt pmem contents at rest. We considered making this recommendation an actively enforced requirement, but in the end decided to leave it as a distribution / administrator policy to allow for emulation and test environments that lack security capable NVDIMMs. Summary: - Replace the /sys/class/dax device model with /sys/bus/dax, and include a compat driver so distributions can opt-in to the new ABI. - Allow for an alternative driver for the device-dax address-range - Introduce the 'kmem' driver to hotplug / assign a device-dax address-range to the core-mm. - Arrange for the device-dax target-node to be onlined so that the newly added memory range can be uniquely referenced by numa apis" NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because we currently have special - and very annoying rules in the kernel about accessing PMEM only with the "MC safe" accessors, because machine checks inside the regular repeat string copy functions can be fatal in some (not described) circumstances. And apparently the PMEM modules can cause that a lot more than regular RAM. The argument is that this happens because PMEM doesn't necessarily get scrubbed at boot like RAM does, but that is planned to be added for the user space tooling. Quoting Dan from another email: "The exposure can be reduced in the volatile-RAM case by scanning for and clearing errors before it is onlined as RAM. The userspace tooling for that can be in place before v5.1-final. There's also runtime notifications of errors via acpi_nfit_uc_error_notify() from background scrubbers on the DIMM devices. With that mechanism the kernel could proactively clear newly discovered poison in the volatile case, but that would be additional development more suitable for v5.2. I understand the concern, and the need to highlight this issue by tapping the brakes on feature development, but I don't see PMEM as RAM making the situation worse when the exposure is also there via DAX in the PMEM case. Volatile-RAM is arguably a safer use case since it's possible to repair pages where the persistent case needs active application coordination" * tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: "Hotplug" persistent memory for use like normal RAM mm/resource: Let walk_system_ram_range() search child resources mm/memory-hotplug: Allow memory resources to be children mm/resource: Move HMM pr_debug() deeper into resource code mm/resource: Return real error codes from walk failures device-dax: Add a 'modalias' attribute to DAX 'bus' devices device-dax: Add a 'target_node' attribute device-dax: Auto-bind device after successful new_id acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node device-dax: Add /sys/class/dax backwards compatibility device-dax: Add support for a dax override driver device-dax: Move resource pinning+mapping into the common driver device-dax: Introduce bus + driver model device-dax: Start defining a dax bus model device-dax: Remove multi-resource infrastructure device-dax: Kill dax_region base device-dax: Kill dax_region ida |
||
Linus Torvalds
|
d14d7f14f1 |
xen: fixes and features for 5.1-rc1
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXIYrgwAKCRCAXGG7T9hj viyuAP4/bKpQ8QUp2V6ddkyEG4NTkA7H87pqQQsxJe9sdoyRRwD5AReS7oitoRS/ cm6SBpwdaPRX/hfVvT2/h1GWxkvDFgA= =8Zfa -----END PGP SIGNATURE----- Merge tag 'for-linus-5.1a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "xen fixes and features: - remove fallback code for very old Xen hypervisors - three patches for fixing Xen dom0 boot regressions - an old patch for Xen PCI passthrough which was never applied for unknown reasons - some more minor fixes and cleanup patches" * tag 'for-linus-5.1a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: fix dom0 boot on huge systems xen, cpu_hotplug: Prevent an out of bounds access xen: remove pre-xen3 fallback handlers xen/ACPI: Switch to bitmap_zalloc() x86/xen: dont add memory above max allowed allocation x86: respect memory size limiting via mem= parameter xen/gntdev: Check and release imported dma-bufs on close xen/gntdev: Do not destroy context while dma-bufs are in use xen/pciback: Don't disable PCI_COMMAND on PCI device reset. xen-scsiback: mark expected switch fall-through xen: mark expected switch fall-through |
||
Qian Cai
|
cd02cf1ace |
mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC
When onlining a memory block with DEBUG_PAGEALLOC, it unmaps the pages in the block from kernel, However, it does not map those pages while offlining at the beginning. As the result, it triggers a panic below while onlining on ppc64le as it checks if the pages are mapped before unmapping. However, the imbalance exists for all arches where double-unmappings could happen. Therefore, let kernel map those pages in generic_online_page() before they have being freed into the page allocator for the first time where it will set the page count to one. On the other hand, it works fine during the boot, because at least for IBM POWER8, it does, early_setup early_init_mmu harsh__early_init_mmu htab_initialize [1] htab_bolt_mapping [2] where it effectively map all memblock regions just like kernel_map_linear_page(), so later mem_init() -> memblock_free_all() will unmap them just fine without any imbalance. On other arches without this imbalance checking, it still unmap them once at the most. [1] for_each_memblock(memory, reg) { base = (unsigned long)__va(reg->base); size = reg->size; DBG("creating mapping for region: %lx..%lx (prot: %lx)\n", base, size, prot); BUG_ON(htab_bolt_mapping(base, base + size, __pa(base), prot, mmu_linear_psize, mmu_kernel_ssize)); } [2] linear_map_hash_slots[paddr >> PAGE_SHIFT] = ret | 0x80; kernel BUG at arch/powerpc/mm/hash_utils_64.c:1815! Oops: Exception in kernel mode, sig: 5 [#1] LE SMP NR_CPUS=256 DEBUG_PAGEALLOC NUMA pSeries CPU: 2 PID: 4298 Comm: bash Not tainted 5.0.0-rc7+ #15 NIP: c000000000062670 LR: c00000000006265c CTR: 0000000000000000 REGS: c0000005bf8a75b0 TRAP: 0700 Not tainted (5.0.0-rc7+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28422842 XER: 00000000 CFAR: c000000000804f44 IRQMASK: 1 NIP [c000000000062670] __kernel_map_pages+0x2e0/0x4f0 LR [c00000000006265c] __kernel_map_pages+0x2cc/0x4f0 Call Trace: __kernel_map_pages+0x2cc/0x4f0 free_unref_page_prepare+0x2f0/0x4d0 free_unref_page+0x44/0x90 __online_page_free+0x84/0x110 online_pages_range+0xc0/0x150 walk_system_ram_range+0xc8/0x120 online_pages+0x280/0x5a0 memory_subsys_online+0x1b4/0x270 device_online+0xc0/0xf0 state_store+0xc0/0x180 dev_attr_store+0x3c/0x60 sysfs_kf_write+0x70/0xb0 kernfs_fop_write+0x10c/0x250 __vfs_write+0x48/0x240 vfs_write+0xd8/0x210 ksys_write+0x70/0x120 system_call+0x5c/0x70 Link: http://lkml.kernel.org/r/20190301220814.97339-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Michal Hocko <mhocko@kernel.org> Cc: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Oscar Salvador
|
daf3538ad5 |
mm,memory_hotplug: explicitly pass the head to isolate_huge_page
isolate_huge_page() expects we pass the head of hugetlb page to it: bool isolate_huge_page(...) { ... VM_BUG_ON_PAGE(!PageHead(page), page); ... } While I really cannot think of any situation where we end up with a non-head page between hands in do_migrate_range(), let us make sure the code is as sane as possible by explicitly passing the Head. Since we already got the pointer, it does not take us extra effort. Link: http://lkml.kernel.org/r/20190208090604.975-1-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Anthony Yznaga <anthony.yznaga@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Wei Yang
|
c52e75935f |
mm: remove extra drain pages on pcp list
In the current implementation, there are two places to isolate a range of page: __offline_pages() and alloc_contig_range(). During this procedure, it will drain pages on pcp list. Below is a brief call flow: __offline_pages()/alloc_contig_range() start_isolate_page_range() set_migratetype_isolate() drain_all_pages() drain_all_pages() <--- A This snippet shows the current logic is isolate and drain pcp list for each pageblock and drain pcp list again for the whole range. start_isolate_page_range is responsible for isolating the given pfn range. One part of that job is to make sure that also pages that are on the allocator pcp lists are properly isolated. Otherwise they could be reused and the range wouldn't be completely isolated until the memory is freed back. While there is no strict guarantee here because pages might get allocated at any time before drain_all_pages is called there doesn't seem to be any strong demand for such a guarantee. In any case, draining is already done at the isolation level and there is no need to do it again later by start_isolate_page_range callers (memory hotplug and CMA allocator currently). Therefore remove pointless draining in existing callers to make the code more clear and functionally correct. [mhocko@suse.com: provide a clearer changelog for the last two paragraphs] Link: http://lkml.kernel.org/r/20190105233141.2329-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Anshuman Khandual
|
98fa15f34c |
mm: replace all open encodings for NUMA_NO_NODE
Patch series "Replace all open encodings for NUMA_NO_NODE", v3. All these places for replacement were found by running the following grep patterns on the entire kernel code. Please let me know if this might have missed some instances. This might also have replaced some false positives. I will appreciate suggestions, inputs and review. 1. git grep "nid == -1" 2. git grep "node == -1" 3. git grep "nid = -1" 4. git grep "node = -1" This patch (of 2): At present there are multiple places where invalid node number is encoded as -1. Even though implicitly understood it is always better to have macros in there. Replace these open encodings for an invalid node number with the global macro NUMA_NO_NODE. This helps remove NUMA related assumptions like 'invalid node' from various places redirecting them to a common definition. Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe] Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx] Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband] Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Arun KS
|
a9cd410a3d |
mm/page_alloc.c: memory hotplug: free pages as higher order
When freeing pages are done with higher order, time spent on coalescing pages by buddy allocator can be reduced. With section size of 256MB, hot add latency of a single section shows improvement from 50-60 ms to less than 1 ms, hence improving the hot add latency by 60 times. Modify external providers of online callback to align with the change. [arunks@codeaurora.org: v11] Link: http://lkml.kernel.org/r/1547792588-18032-1-git-send-email-arunks@codeaurora.org [akpm@linux-foundation.org: remove unused local, per Arun] [akpm@linux-foundation.org: avoid return of void-returning __free_pages_core(), per Oscar] [akpm@linux-foundation.org: fix it for mm-convert-totalram_pages-and-totalhigh_pages-variables-to-atomic.patch] [arunks@codeaurora.org: v8] Link: http://lkml.kernel.org/r/1547032395-24582-1-git-send-email-arunks@codeaurora.org [arunks@codeaurora.org: v9] Link: http://lkml.kernel.org/r/1547098543-26452-1-git-send-email-arunks@codeaurora.org Link: http://lkml.kernel.org/r/1538727006-5727-1-git-send-email-arunks@codeaurora.org Signed-off-by: Arun KS <arunks@codeaurora.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Srivatsa Vaddagiri <vatsa@codeaurora.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Dave Hansen
|
2794129e90 |
mm/memory-hotplug: Allow memory resources to be children
The mm/resource.c code is used to manage the physical address space. The current resource configuration can be viewed in /proc/iomem. An example of this is at the bottom of this description. The nvdimm subsystem "owns" the physical address resources which map to persistent memory and has resources inserted for them as "Persistent Memory". The best way to repurpose this for volatile use is to leave the existing resource in place, but add a "System RAM" resource underneath it. This clearly communicates the ownership relationship of this memory. The request_resource_conflict() API only deals with the top-level resources. Replace it with __request_region() which will search for !IORESOURCE_BUSY areas lower in the resource tree than the top level. We *could* also simply truncate the existing top-level "Persistent Memory" resource and take over the released address space. But, this means that if we ever decide to hot-unplug the "RAM" and give it back, we need to recreate the original setup, which may mean going back to the BIOS tables. This should have no real effect on the existing collision detection because the areas that truly conflict should be marked IORESOURCE_BUSY. 00000000-00000fff : Reserved 00001000-0009fbff : System RAM 0009fc00-0009ffff : Reserved 000a0000-000bffff : PCI Bus 0000:00 000c0000-000c97ff : Video ROM 000c9800-000ca5ff : Adapter ROM 000f0000-000fffff : Reserved 000f0000-000fffff : System ROM 00100000-9fffffff : System RAM 01000000-01e071d0 : Kernel code 01e071d1-027dfdff : Kernel data 02dc6000-0305dfff : Kernel bss a0000000-afffffff : Persistent Memory (legacy) a0000000-a7ffffff : System RAM b0000000-bffdffff : System RAM bffe0000-bfffffff : Reserved c0000000-febfffff : PCI Bus 0000:00 Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: linux-nvdimm@lists.01.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: Huang Ying <ying.huang@intel.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Keith Busch <keith.busch@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
Dave Hansen
|
b926b7f3ba |
mm/resource: Move HMM pr_debug() deeper into resource code
HMM consumes physical address space for its own use, even though nothing is mapped or accessible there. It uses a special resource description (IORES_DESC_DEVICE_PRIVATE_MEMORY) to uniquely identify these areas. When HMM consumes address space, it makes a best guess about what to consume. However, it is possible that a future memory or device hotplug can collide with the reserved area. In the case of these conflicts, there is an error message in register_memory_resource(). Later patches in this series move register_memory_resource() from using request_resource_conflict() to __request_region(). Unfortunately, __request_region() does not return the conflict like the previous function did, which makes it impossible to check for IORES_DESC_DEVICE_PRIVATE_MEMORY in a conflicting resource. Instead of warning in register_memory_resource(), move the check into the core resource code itself (__request_region()) where the conflicting resource _is_ available. This has the added bonus of producing a warning in case of HMM conflicts with devices *or* RAM address space, as opposed to the RAM- only warnings that were there previously. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: linux-nvdimm@lists.01.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: Huang Ying <ying.huang@intel.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Keith Busch <keith.busch@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
Michal Hocko
|
891cb2a72d |
mm, memory_hotplug: fix off-by-one in is_pageblock_removable
Rong Chen has reported the following boot crash: PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 239 Comm: udevd Not tainted 5.0.0-rc4-00149-gefad4e4 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 RIP: 0010:page_mapping+0x12/0x80 Code: 5d c3 48 89 df e8 0e ad 02 00 85 c0 75 da 89 e8 5b 5d c3 0f 1f 44 00 00 53 48 89 fb 48 8b 43 08 48 8d 50 ff a8 01 48 0f 45 da <48> 8b 53 08 48 8d 42 ff 83 e2 01 48 0f 44 c3 48 83 38 ff 74 2f 48 RSP: 0018:ffff88801fa87cd8 EFLAGS: 00010202 RAX: ffffffffffffffff RBX: fffffffffffffffe RCX: 000000000000000a RDX: fffffffffffffffe RSI: ffffffff820b9a20 RDI: ffff88801e5c0000 RBP: 6db6db6db6db6db7 R08: ffff88801e8bb000 R09: 0000000001b64d13 R10: ffff88801fa87cf8 R11: 0000000000000001 R12: ffff88801e640000 R13: ffffffff820b9a20 R14: ffff88801f145258 R15: 0000000000000001 FS: 00007fb2079817c0(0000) GS:ffff88801dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000006 CR3: 000000001fa82000 CR4: 00000000000006a0 Call Trace: __dump_page+0x14/0x2c0 is_mem_section_removable+0x24c/0x2c0 removable_show+0x87/0xa0 dev_attr_show+0x25/0x60 sysfs_kf_seq_show+0xba/0x110 seq_read+0x196/0x3f0 __vfs_read+0x34/0x180 vfs_read+0xa0/0x150 ksys_read+0x44/0xb0 do_syscall_64+0x5e/0x4a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe and bisected it down to commit |
||
Juergen Gross
|
357b4da50a |
x86: respect memory size limiting via mem= parameter
When limiting memory size via kernel parameter "mem=" this should be respected even in case of memory made accessible via a PCI card. Today this kind of memory won't be made usable in initial memory setup as the memory won't be visible in E820 map, but it might be added when adding PCI devices due to corresponding ACPI table entries. Not respecting "mem=" can be corrected by adding a global max_mem_size variable set by parse_memopt() which will result in rejecting adding memory areas resulting in a memory size above the allowed limit. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
Michal Hocko
|
e3df4c6e48 |
mm, memory_hotplug: __offline_pages fix wrong locking
Jan has noticed that we do double unlock on some failure paths when
offlining a page range. This is indeed the case when
test_pages_in_a_zone respp. start_isolate_page_range fail. This was an
omission when forward porting the debugging patch from an older kernel.
Fix the issue by dropping mem_hotplug_done from the failure condition
and keeping the single unlock in the catch all failure path.
Link: http://lkml.kernel.org/r/20190115120307.22768-1-mhocko@kernel.org
Fixes:
|
||
Oscar Salvador
|
eeb0efd071 |
mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages
This is the same sort of error we saw in commit
|
||
Mikhail Zaslonko
|
24feb47c5f |
mm, memory_hotplug: test_pages_in_a_zone do not pass the end of zone
If memory end is not aligned with the sparse memory section boundary, the mapping of such a section is only partly initialized. This may lead to VM_BUG_ON due to uninitialized struct pages access from test_pages_in_a_zone() function triggered by memory_hotplug sysfs handlers. Here are the the panic examples: CONFIG_DEBUG_VM_PGFLAGS=y kernel parameter mem=2050M -------------------------- page:000003d082008000 is uninitialized and poisoned page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) Call Trace: test_pages_in_a_zone+0xde/0x160 show_valid_zones+0x5c/0x190 dev_attr_show+0x34/0x70 sysfs_kf_seq_show+0xc8/0x148 seq_read+0x204/0x480 __vfs_read+0x32/0x178 vfs_read+0x82/0x138 ksys_read+0x5a/0xb0 system_call+0xdc/0x2d8 Last Breaking-Event-Address: test_pages_in_a_zone+0xde/0x160 Kernel panic - not syncing: Fatal exception: panic_on_oops Fix this by checking whether the pfn to check is within the zone. [mhocko@suse.com: separated this change from http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com] Link: http://lkml.kernel.org/r/20190128144506.15603-3-mhocko@kernel.org [mhocko@suse.com: separated this change from http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com] Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
efad4e475c |
mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone
Patch series "mm, memory_hotplug: fix uninitialized pages fallouts", v2.
Mikhail Zaslonko has posted fixes for the two bugs quite some time ago
[1]. I have pushed back on those fixes because I believed that it is
much better to plug the problem at the initialization time rather than
play whack-a-mole all over the hotplug code and find all the places
which expect the full memory section to be initialized.
We have ended up with commit
|
||
Oscar Salvador
|
1723058eab |
mm, memory_hotplug: don't bail out in do_migrate_range() prematurely
do_migrate_range() takes a memory range and tries to isolate the pages to put them into a list. This list will be later on used in migrate_pages() to know the pages we need to migrate. Currently, if we fail to isolate a single page, we put all already isolated pages back to their LRU and we bail out from the function. This is quite suboptimal, as this will force us to start over again because scan_movable_pages will give us the same range. If there is no chance that we can isolate that page, we will loop here forever. Issue debugged in [1] has proved that. During the debugging of that issue, it was noticed that if do_migrate_ranges() fails to isolate a single page, we will just discard the work we have done so far and bail out, which means that scan_movable_pages() will find again the same set of pages. Instead, we can just skip the error, keep isolating as much pages as possible and then proceed with the call to migrate_pages(). This will allow us to do as much work as possible at once. [1] https://lkml.org/lkml/2018/12/6/324 Michal said: : I still think that this doesn't give us a whole picture. Looping for : ever is a bug. Failing the isolation is quite possible and it should : be a ephemeral condition (e.g. a race with freeing the page or : somebody else isolating the page for whatever reason). And here comes : the disadvantage of the current implementation. We simply throw : everything on the floor just because of a ephemeral condition. The : racy page_count check is quite dubious to prevent from that. Link: http://lkml.kernel.org/r/20181211135312.27034-1-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
bb8965bd82 |
mm, memory_hotplug: deobfuscate migration part of offlining
Memory migration might fail during offlining and we keep retrying in that case. This is currently obfuscated by goto retry loop. The code is hard to follow and as a result it is even suboptimal becase each retry round scans the full range from start_pfn even though we have successfully scanned/migrated [start_pfn, pfn] range already. This is all only because check_pages_isolated failure has to rescan the full range again. De-obfuscate the migration retry loop by promoting it to a real for loop. In fact remove the goto altogether by making it a proper double loop (yeah, gotos are nasty in this specific case). In the end we will get a slightly more optimal code which is better readable. [akpm@linux-foundation.org: reflow comments to 80 cols] Link: http://lkml.kernel.org/r/20181211142741.2607-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
a85009c377 |
mm, memory_hotplug: try to migrate full pfn range
Patch series "few memory offlining enhancements". I have been chasing memory offlining not making progress recently. On the way I have noticed few weird decisions in the code. The migration itself is restricted without a reasonable justification and the retry loop around the migration is quite messy. This is addressed by patch 1 and patch 2. Patch 3 is targeting on the faultaround code which has been a hot candidate for the initial issue reported upstream [2] and that I am debugging internally. It turned out to be not the main contributor in the end but I believe we should address it regardless. See the patch description for more details. [1] http://lkml.kernel.org/r/20181120134323.13007-1-mhocko@kernel.org [2] http://lkml.kernel.org/r/20181114070909.GB2653@MiWiFi-R3L-srv This patch (of 3): do_migrate_range has been limiting the number of pages to migrate to 256 for some reason which is not documented. Even if the limit made some sense back then when it was introduced it doesn't really serve a good purpose these days. If the range contains huge pages then we break out of the loop too early and go through LRU and pcp caches draining and scan_movable_pages is quite suboptimal. The only reason to limit the number of pages I can think of is to reduce the potential time to react on the fatal signal. But even then the number of pages is a questionable metric because even a single page migration might block in a non-killable state (e.g. __unmap_and_move). Remove the limit and offline the full requested range (this is one memblock worth of pages with the current code). Should we ever get a report that offlining takes too long to react on fatal signal then we should rather fix the core migration to use killable waits and bailout on a signal. Link: http://lkml.kernel.org/r/20181211142741.2607-1-mhocko@kernel.org Link: http://lkml.kernel.org/r/20181211142741.2607-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
b15c87263a |
hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined
We have received a bug report that an injected MCE about faulty memory prevents memory offline to succeed on 4.4 base kernel. The underlying reason was that the HWPoison page has an elevated reference count and the migration keeps failing. There are two problems with that. First of all it is dubious to migrate the poisoned page because we know that accessing that memory is possible to fail. Secondly it doesn't make any sense to migrate a potentially broken content and preserve the memory corruption over to a new location. Oscar has found out that 4.4 and the current upstream kernels behave slightly differently with his simply testcase === int main(void) { int ret; int i; int fd; char *array = malloc(4096); char *array_locked = malloc(4096); fd = open("/tmp/data", O_RDONLY); read(fd, array, 4095); for (i = 0; i < 4096; i++) array_locked[i] = 'd'; ret = mlock((void *)PAGE_ALIGN((unsigned long)array_locked), sizeof(array_locked)); if (ret) perror("mlock"); sleep (20); ret = madvise((void *)PAGE_ALIGN((unsigned long)array_locked), 4096, MADV_HWPOISON); if (ret) perror("madvise"); for (i = 0; i < 4096; i++) array_locked[i] = 'd'; return 0; } === + offline this memory. In 4.4 kernels he saw the hwpoisoned page to be returned back to the LRU list kernel: [<ffffffff81019ac9>] dump_trace+0x59/0x340 kernel: [<ffffffff81019e9a>] show_stack_log_lvl+0xea/0x170 kernel: [<ffffffff8101ac71>] show_stack+0x21/0x40 kernel: [<ffffffff8132bb90>] dump_stack+0x5c/0x7c kernel: [<ffffffff810815a1>] warn_slowpath_common+0x81/0xb0 kernel: [<ffffffff811a275c>] __pagevec_lru_add_fn+0x14c/0x160 kernel: [<ffffffff811a2eed>] pagevec_lru_move_fn+0xad/0x100 kernel: [<ffffffff811a334c>] __lru_cache_add+0x6c/0xb0 kernel: [<ffffffff81195236>] add_to_page_cache_lru+0x46/0x70 kernel: [<ffffffffa02b4373>] extent_readpages+0xc3/0x1a0 [btrfs] kernel: [<ffffffff811a16d7>] __do_page_cache_readahead+0x177/0x200 kernel: [<ffffffff811a18c8>] ondemand_readahead+0x168/0x2a0 kernel: [<ffffffff8119673f>] generic_file_read_iter+0x41f/0x660 kernel: [<ffffffff8120e50d>] __vfs_read+0xcd/0x140 kernel: [<ffffffff8120e9ea>] vfs_read+0x7a/0x120 kernel: [<ffffffff8121404b>] kernel_read+0x3b/0x50 kernel: [<ffffffff81215c80>] do_execveat_common.isra.29+0x490/0x6f0 kernel: [<ffffffff81215f08>] do_execve+0x28/0x30 kernel: [<ffffffff81095ddb>] call_usermodehelper_exec_async+0xfb/0x130 kernel: [<ffffffff8161c045>] ret_from_fork+0x55/0x80 And that latter confuses the hotremove path because an LRU page is attempted to be migrated and that fails due to an elevated reference count. It is quite possible that the reuse of the HWPoisoned page is some kind of fixed race condition but I am not really sure about that. With the upstream kernel the failure is slightly different. The page doesn't seem to have LRU bit set but isolate_movable_page simply fails and do_migrate_range simply puts all the isolated pages back to LRU and therefore no progress is made and scan_movable_pages finds same set of pages over and over again. Fix both cases by explicitly checking HWPoisoned pages before we even try to get reference on the page, try to unmap it if it is still mapped. As explained by Naoya: : Hwpoison code never unmapped those for no big reason because : Ksm pages never dominate memory, so we simply didn't have strong : motivation to save the pages. Also put WARN_ON(PageLRU) in case there is a race and we can hit LRU HWPoison pages which shouldn't happen but I couldn't convince myself about that. Naoya has noted the following: : Theoretically no such gurantee, because try_to_unmap() doesn't have a : guarantee of success and then memory_failure() returns immediately : when hwpoison_user_mappings fails. : Or the following code (comes after hwpoison_user_mappings block) also impli= : es : that the target page can still have PageLRU flag. : : /* : * Torn down by someone else? : */ : if (PageLRU(p) && !PageSwapCache(p) && p->mapping =3D=3D NULL) { : action_result(pfn, MF_MSG_TRUNCATED_LRU, MF_IGNORED); : res =3D -EBUSY; : goto out; : } : : So I think it's OK to keep "if (WARN_ON(PageLRU(page)))" block in : current version of your patch. Link: http://lkml.kernel.org/r/20181206120135.14079-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.com> Debugged-by: Oscar Salvador <osalvador@suse.com> Tested-by: Oscar Salvador <osalvador@suse.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Wei Yang
|
fa004ab736 |
mm, hotplug: move init_currently_empty_zone() under zone_span_lock protection
During online_pages phase, pgdat->nr_zones will be updated in case this zone is empty. Currently the online_pages phase is protected by the global locks (device_device_hotplug_lock and mem_hotplug_lock), which ensures there is no contention during the update of nr_zones. These global locks introduces scalability issues (especially the second one), which slow down code relying on get_online_mems(). This is also a preparation for not having to rely on get_online_mems() but instead some more fine grained locks. The patch moves init_currently_empty_zone under both zone_span_writelock and pgdat_resize_lock because both the pgdat state is changed (nr_zones) and the zone's start_pfn. Also this patch changes the documentation of node_size_lock to include the protection of nr_zones. Link: http://lkml.kernel.org/r/20181203205016.14123-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Wei Yang
|
4e0d2e7ef1 |
mm, sparse: pass nid instead of pgdat to sparse_add_one_section()
Since the information needed in sparse_add_one_section() is node id to allocate proper memory, it is not necessary to pass its pgdat. This patch changes the prototype of sparse_add_one_section() to pass node id directly. This is intended to reduce misleading that sparse_add_one_section() would touch pgdat. Link: http://lkml.kernel.org/r/20181204085657.20472-2-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Oscar Salvador
|
2c2a5af6fe |
mm, memory_hotplug: add nid parameter to arch_remove_memory
Patch series "Do not touch pages in hot-remove path", v2. This patchset aims for two things: 1) A better definition about offline and hot-remove stage 2) Solving bugs where we can access non-initialized pages during hot-remove operations [2] [3]. This is achieved by moving all page/zone handling to the offline stage, so we do not need to access pages when hot-removing memory. [1] https://patchwork.kernel.org/cover/10691415/ [2] https://patchwork.kernel.org/patch/10547445/ [3] https://www.spinics.net/lists/linux-mm/msg161316.html This patch (of 5): This is a preparation for the following-up patches. The idea of passing the nid is that it will allow us to get rid of the zone parameter afterwards. Link: http://lkml.kernel.org/r/20181127162005.15833-2-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Hildenbrand
|
f29d8e9c01 |
mm/memory_hotplug: drop "online" parameter from add_memory_resource()
Userspace should always be in charge of how to online memory and if memory should be onlined automatically in the kernel. Let's drop the parameter to overwrite this - XEN passes memhp_auto_online, just like add_memory(), so we can directly use that instead internally. Link: http://lkml.kernel.org/r/20181123123740.27652-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
46a3679b81 |
mm, memory_hotplug: do not clear numa_node association after hot_remove
Per-cpu numa_node provides a default node for each possible cpu. The
association gets initialized during the boot when the architecture
specific code explores cpu->NUMA affinity. When the whole NUMA node is
removed though we are clearing this association
try_offline_node
check_and_unmap_cpu_on_node
unmap_cpu_on_node
numa_clear_node
numa_set_node(cpu, NUMA_NO_NODE)
This means that whoever calls cpu_to_node for a cpu associated with such a
node will get NUMA_NO_NODE. This is problematic for two reasons. First
it is fragile because __alloc_pages_node would simply blow up on an
out-of-bound access. We have encountered this when loading kvm module
BUG: unable to handle kernel paging request at 00000000000021c0
IP: __alloc_pages_nodemask+0x93/0xb70
PGD 800000ffe853e067 PUD 7336bbc067 PMD 0
Oops: 0000 [#1] SMP
[...]
CPU: 88 PID: 1223749 Comm: modprobe Tainted: G W 4.4.156-94.64-default #1
RIP: __alloc_pages_nodemask+0x93/0xb70
RSP: 0018:ffff887354493b40 EFLAGS: 00010202
RAX: 00000000000021c0 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000002 RDI: 00000000014000c0
RBP: 00000000014000c0 R08: ffffffffffffffff R09: 0000000000000000
R10: ffff88fffc89e790 R11: 0000000000014000 R12: 0000000000000101
R13: ffffffffa0772cd4 R14: ffffffffa0769ac0 R15: 0000000000000000
FS: 00007fdf2f2f1700(0000) GS:ffff88fffc880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000021c0 CR3: 00000077205ee000 CR4: 0000000000360670
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
alloc_vmcs_cpu+0x3d/0x90 [kvm_intel]
hardware_setup+0x781/0x849 [kvm_intel]
kvm_arch_hardware_setup+0x28/0x190 [kvm]
kvm_init+0x7c/0x2d0 [kvm]
vmx_init+0x1e/0x32c [kvm_intel]
do_one_initcall+0xca/0x1f0
do_init_module+0x5a/0x1d7
load_module+0x1393/0x1c90
SYSC_finit_module+0x70/0xa0
entry_SYSCALL_64_fastpath+0x1e/0xb7
DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x1e/0xb7
on an older kernel but the code is basically the same in the current Linus
tree as well. alloc_vmcs_cpu could use alloc_pages_nodemask which would
recognize NUMA_NO_NODE and use alloc_pages_node which would translate it
to numa_mem_id but that is wrong as well because it would use a cpu
affinity of the local CPU which might be quite far from the original node.
It is also reasonable to expect that cpu_to_node will provide a sane
value and there might be many more callers like that.
The second problem is that __register_one_node relies on cpu_to_node to
properly associate cpus back to the node when it is onlined. We do not
want to lose that link as there is no arch independent way to get it from
the early boot time AFAICS.
Drop the whole check_and_unmap_cpu_on_node machinery and keep the
association to fix both issues. The NODE_DATA(nid) is not deallocated so
it will stay in place and if anybody wants to allocate from that node then
a fallback node will be used.
Thanks to Vlastimil Babka for his live system debugging skills that helped
debugging the issue.
Link: http://lkml.kernel.org/r/20181108100413.966-1-mhocko@kernel.org
Fixes:
|
||
Michal Hocko
|
d381c54760 |
mm: only report isolation failures when offlining memory
Heiko has complained that his log is swamped by warnings from has_unmovable_pages [ 20.536664] page dumped because: has_unmovable_pages [ 20.536792] page:000003d081ff4080 count:1 mapcount:0 mapping:000000008ff88600 index:0x0 compound_mapcount: 0 [ 20.536794] flags: 0x3fffe0000010200(slab|head) [ 20.536795] raw: 03fffe0000010200 0000000000000100 0000000000000200 000000008ff88600 [ 20.536796] raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000 [ 20.536797] page dumped because: has_unmovable_pages [ 20.536814] page:000003d0823b0000 count:1 mapcount:0 mapping:0000000000000000 index:0x0 [ 20.536815] flags: 0x7fffe0000000000() [ 20.536817] raw: 07fffe0000000000 0000000000000100 0000000000000200 0000000000000000 [ 20.536818] raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000 which are not triggered by the memory hotplug but rather CMA allocator. The original idea behind dumping the page state for all call paths was that these messages will be helpful debugging failures. From the above it seems that this is not the case for the CMA path because we are lacking much more context. E.g the second reported page might be a CMA allocated page. It is still interesting to see a slab page in the CMA area but it is hard to tell whether this is bug from the above output alone. Address this issue by dumping the page state only on request. Both start_isolate_page_range and has_unmovable_pages already have an argument to ignore hwpoison pages so make this argument more generic and turn it into flags and allow callers to combine non-default modes into a mask. While we are at it, has_unmovable_pages call from is_pageblock_removable_nolock (sysfs removable file) is questionable to report the failure so drop it from there as well. Link: http://lkml.kernel.org/r/20181218092802.31429-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
2932c8b050 |
mm, memory_hotplug: be more verbose for memory offline failures
There is only very limited information printed when the memory offlining fails: [ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed due to signal backoff This tells us that the failure is triggered by the userspace intervention but it doesn't tell us much more about the underlying reason. It might be that the page migration failes repeatedly and the userspace timeout expires and send a signal or it might be some of the earlier steps (isolation, memory notifier) takes too long. If the migration failes then it would be really helpful to see which page that and its state. The same applies to the isolation phase. If we fail to isolate a page from the allocator then knowing the state of the page would be helpful as well. Dump the page state that fails to get isolated or migrated. This will tell us more about the failure and what to focus on during debugging. [akpm@linux-foundation.org: add missing printk arg] [mhocko@suse.com: tweak dump_page() `reason' text] Link: http://lkml.kernel.org/r/20181116083020.20260-6-mhocko@kernel.org Link: http://lkml.kernel.org/r/20181107101830.17405-6-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
7960509329 |
mm, memory_hotplug: print reason for the offlining failure
The memory offlining failure reporting is inconsistent and insufficient. Some error paths simply do not report the failure to the log at all. When we do report there are no details about the reason of the failure and there are several of them which makes memory offlining failures hard to debug. Make sure that the memory offlining [mem %#010llx-%#010llx] failed message is printed for all failures and also provide a short textual reason for the failure e.g. [ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed due to signal backoff this tells us that the offlining has failed because of a signal pending aka user intervention. [akpm@linux-foundation.org: tweak messages a bit] Link: http://lkml.kernel.org/r/20181107101830.17405-5-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
6cc2baf600 |
mm, memory_hotplug: drop pointless block alignment checks from __offline_pages
This function is never called from a context which would provide misaligned pfn range so drop the pointless check. Link: http://lkml.kernel.org/r/20181107101830.17405-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
dd33ad7b25 |
memory_hotplug: cond_resched in __remove_pages
We have received a bug report that unbinding a large pmem (>1TB) can result in a soft lockup: NMI watchdog: BUG: soft lockup - CPU#9 stuck for 23s! [ndctl:4365] [...] Supported: Yes CPU: 9 PID: 4365 Comm: ndctl Not tainted 4.12.14-94.40-default #1 SLE12-SP4 Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018 task: ffff9cce7d4410c0 task.stack: ffffbe9eb1bc4000 RIP: 0010:__put_page+0x62/0x80 Call Trace: devm_memremap_pages_release+0x152/0x260 release_nodes+0x18d/0x1d0 device_release_driver_internal+0x160/0x210 unbind_store+0xb3/0xe0 kernfs_fop_write+0x102/0x180 __vfs_write+0x26/0x150 vfs_write+0xad/0x1a0 SyS_write+0x42/0x90 do_syscall_64+0x74/0x150 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fd13166b3d0 It has been reported on an older (4.12) kernel but the current upstream code doesn't cond_resched in the hot remove code at all and the given range to remove might be really large. Fix the issue by calling cond_resched once per memory section. Link: http://lkml.kernel.org/r/20181031125840.23982-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Hildenbrand
|
381eab4a6e |
mm/memory_hotplug: fix online/offline_pages called w.o. mem_hotplug_lock
There seem to be some problems as result of |
||
David Hildenbrand
|
8df1d0e4a2 |
mm/memory_hotplug: make add_memory() take the device_hotplug_lock
add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
arch/powerpc/platforms/pseries/hotplug-memory.c
drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.
In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g. from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see
|
||
David Hildenbrand
|
d15e59260f |
mm/memory_hotplug: make remove_memory() take the device_hotplug_lock
Patch series "mm: online/offline_pages called w.o. mem_hotplug_lock", v3. Reading through the code and studying how mem_hotplug_lock is to be used, I noticed that there are two places where we can end up calling device_online()/device_offline() - online_pages()/offline_pages() without the mem_hotplug_lock. And there are other places where we call device_online()/device_offline() without the device_hotplug_lock. While e.g. echo "online" > /sys/devices/system/memory/memory9/state is fine, e.g. echo 1 > /sys/devices/system/memory/memory9/online Will not take the mem_hotplug_lock. However the device_lock() and device_hotplug_lock. E.g. via memory_probe_store(), we can end up calling add_memory()->online_pages() without the device_hotplug_lock. So we can have concurrent callers in online_pages(). We e.g. touch in online_pages() basically unprotected zone->present_pages then. Looks like there is a longer history to that (see Patch #2 for details), and fixing it to work the way it was intended is not really possible. We would e.g. have to take the mem_hotplug_lock in device/base/core.c, which sounds wrong. Summary: We had a lock inversion on mem_hotplug_lock and device_lock(). More details can be found in patch 3 and patch 6. I propose the general rules (documentation added in patch 6): 1. add_memory/add_memory_resource() must only be called with device_hotplug_lock. 2. remove_memory() must only be called with device_hotplug_lock. This is already documented and holds for all callers. 3. device_online()/device_offline() must only be called with device_hotplug_lock. This is already documented and true for now in core code. Other callers (related to memory hotplug) have to be fixed up. 4. mem_hotplug_lock is taken inside of add_memory/remove_memory/ online_pages/offline_pages. To me, this looks way cleaner than what we have right now (and easier to verify). And looking at the documentation of remove_memory, using lock_device_hotplug also for add_memory() feels natural. This patch (of 6): remove_memory() is exported right now but requires the device_hotplug_lock, which is not exported. So let's provide a variant that takes the lock and only export that one. The lock is already held in arch/powerpc/platforms/pseries/hotplug-memory.c drivers/acpi/acpi_memhotplug.c arch/powerpc/platforms/powernv/memtrace.c Apart from that, there are not other users in the tree. Link: http://lkml.kernel.org/r/20180925091457.28651-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Rashmica Gupta <rashmica.g@gmail.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Juergen Gross <jgross@suse.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mike Rapoport
|
57c8a661d9 |
mm: remove include/linux/bootmem.h
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Oscar Salvador
|
86b27beae5 |
mm/memory_hotplug.c: clean up node_states_check_changes_offline()
This patch, as the previous one, gets rid of the wrong if statements. While at it, I realized that the comments are sometimes very confusing, to say the least, and wrong. For example: ___ zone_last = ZONE_MOVABLE; /* * check whether node_states[N_HIGH_MEMORY] will be changed * If we try to offline the last present @nr_pages from the node, * we can determind we will need to clear the node from * node_states[N_HIGH_MEMORY]. */ for (; zt <= zone_last; zt++) present_pages += pgdat->node_zones[zt].present_pages; if (nr_pages >= present_pages) arg->status_change_nid = zone_to_nid(zone); else arg->status_change_nid = -1; ___ In case the node gets empry, it must be removed from N_MEMORY. We already check N_HIGH_MEMORY a bit above within the CONFIG_HIGHMEM ifdef code. Not to say that status_change_nid is for N_MEMORY, and not for N_HIGH_MEMORY. So I re-wrote some of the comments to what I think is better. [osalvador@suse.de: address feedback from Pavel] Link: http://lkml.kernel.org/r/20180921132634.10103-5-osalvador@techadventures.net Link: http://lkml.kernel.org/r/20180919100819.25518-6-osalvador@techadventures.net Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <yasu.isimatu@gmail.com> Cc: Mathieu Malaterre <malat@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Oscar Salvador
|
8efe33f40f |
mm/memory_hotplug.c: simplify node_states_check_changes_online
While looking at node_states_check_changes_online, I stumbled upon some confusing things. Right after entering the function, we find this: if (N_MEMORY == N_NORMAL_MEMORY) zone_last = ZONE_MOVABLE; This is wrong. N_MEMORY cannot really be equal to N_NORMAL_MEMORY. My guess is that this wanted to be something like: if (N_NORMAL_MEMORY == N_HIGH_MEMORY) to check if we have CONFIG_HIGHMEM. Later on, in the CONFIG_HIGHMEM block, we have: if (N_MEMORY == N_HIGH_MEMORY) zone_last = ZONE_MOVABLE; Again, this is wrong, and will never be evaluated to true. Besides removing these wrong if statements, I simplified the function a bit. [osalvador@suse.de: address feedback from Pavel] Link: http://lkml.kernel.org/r/20180921132634.10103-4-osalvador@techadventures.net Link: http://lkml.kernel.org/r/20180919100819.25518-5-osalvador@techadventures.net Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Michal Hocko <mhocko@suse.com> Cc: <yasu.isimatu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Oscar Salvador
|
cf01f6f5e3 |
mm/memory_hotplug.c: tidy up node_states_clear_node()
node_states_clear has the following if statements: if ((N_MEMORY != N_NORMAL_MEMORY) && (arg->status_change_nid_high >= 0)) ... if ((N_MEMORY != N_HIGH_MEMORY) && (arg->status_change_nid >= 0)) ... N_MEMORY can never be equal to neither N_NORMAL_MEMORY nor N_HIGH_MEMORY. Similar problem was found in [1]. Since this is wrong, let us get rid of it. [1] https://patchwork.kernel.org/patch/10579155/ Link: http://lkml.kernel.org/r/20180919100819.25518-4-osalvador@techadventures.net Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Michal Hocko <mhocko@suse.com> Cc: <yasu.isimatu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |