This cleanups 2 things:
1) The first time we loop over the crtc-s, to compare framebuffers, fb1 may
get set to NULL by the fb1 = CRTC_FB(crtci); statement and then we call
to_vbox_framebuffer() on it. The result of this call is only used for
an address comparison, so we don't end up dereferencing the bad pointer,
but still it is better to not do this.
2) Since we already figure out the first crtc with a fb in the first loop
and store that in fb1, there is no need to loop over the crtc-s again just
to find the first crtc with a fb again.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct way to handle errors returned by regualtor_get() and friends is
to propagate the error since that means that an regulator was specified,
but something went wrong when requesting it.
For handling optional regulators, e.g. when the device has an internal
vref, regulator_get_optional() should be used to avoid getting the dummy
regulator that the regulator core otherwise provides.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Until now the "channel" number is identical to how the channel is
identified inside the (FIFO) registers. In our case we have eight
channels and the hardware also has eight inputs.
However, there are two special inputs:
- channel 6 can select between the SAR_ADC_CH6 pad and the chip's
internal temperature sensor
- channel 7 can select between SAR_ADC_CH7 and VSS, VDD / 4, VDD / 2,
VDD * 3 / 4 and VDD.
When programming the registers to read for example the temperature
sensor we have to select FIFO channel 6, set the correct bit which muxes
channel 6 to the temperature sensor and then start the ADC measurement
for channel 6 as usual.
When we add support for the temperature sensor the driver has to know
about that it has to use FIFO channel 6 to measure using the chip's
internal temperature sensor. However, in that case the iio_chan_spec
channel will not be 6 because this is already used for the SAR_ADC_CH6
pad input. Thus we use iio_chan_spec's address field to store the FIFO
channel number for each channel.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In the future we may support two different channel sets:
- one which includes the voltage pads and the temperature sensor output
(for Meson8, Meson8b and Meson8m2)
- one which only includes the voltage pads (GXBB, GXL, GXM and AXG)
Channel 7 has a special function on all of these platforms. However,
since we will have different channel array definitions we want our code
to always use whatever channels struct iio_dev uses.
No functional changes for now. This is the preparation for adding
temperature sensor support to this driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When channels are registered, the hardware channel number is not the
actual iio channel number.
This is because the driver is probed with a certain number of accessible
channels. Some pins are routed and some not, depending on the description of
the board in the DT.
Because of that, channels 0,1,2,3 can correspond to hardware channels
2,3,4,5 for example.
In the buffered triggered case, we need to do the translation accordingly.
Fixed the channel number to stop reading the wrong channel.
Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When doing simple conversions, the driver did not acknowledge the DRDY irq.
If this irq status is not acked, it will be left pending, and as soon as a
trigger is enabled, the irq handler will be called, it doesn't know why
this status has occurred because no channel is pending, and then it will go
int a irq loop and board will hang.
To avoid this situation, read the LCDR after a raw conversion is done.
Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit 053ffe3c8c ("iio: adc: meson-saradc: squash and share the
common adc platform data") put all the data which is needed at runtime
from struct meson_sar_adc_data to a new struct meson_sar_adc_param so
we can re-use the platform specific configuration without having to
duplicate everything just to change the name.
The only place where struct meson_sar_adc_data is now needed is the
_probe function which has to pass the name to the iio_dev. All other
functions only need access to struct meson_sar_adc_param. This means we
can simplify struct meson_sar_adc_priv.
The goal of this patch is to make the code a bit easier to read since
this removes one level of nesting. No functional changes intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This simplifies our _probe function by using of_device_get_match_data
instead of open-coding it. No functional changes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This define is of no use because the driver is avoiding shifting bits
by itself but using FIELD_GET/FIELD_PREP (which are using bit masks)
instead. There is already a MESON_SAR_ADC_DELTA_10_TS_C_MASK bit mask so
MESON_SAR_ADC_DELTA_10_TS_C_SHIFT was redundant.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add device tree support for ROHM BH1750 series ambient light sensors.
Signed-off-by: ryang <decatf@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
p80211metadef.h and p80211metastruct.h both have comments stating they
are autogenerated and should not be edited. However, neither is
generated during build and both have had numerous manual edits since
the driver has been in staging.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reformatting of case blocks has shortened some lines such that
previously split lines can be rejoined without exceeding 80
characters. Rejoined those lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For switch statements with case blocks make the format consistent by
applying K&R formatting, a space before the opening brace, single
indentation of contained code, break inside the block and closing
brace aligned with case.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Combine previously split lines for an assignment; now fits in 80
characters as the name of the macro being assigned was shortened.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_p2_p2MAC_p2CurrentTxRate in p80211metadef.h to
DIDMIB_P2_MAC_CURRENTTXRATE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "P2" to ease readability and reduce
long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_p2_p2MAC in p80211metadef.h to DIDMIB_P2_MAC to fix
"Avoid CamelCase" message from checkpatch and conform to the coding
style guidelines. Also shorten name by removing repeated use of "P2"
to ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_p2_p2NIC_p2PRISupRange in p80211metadef.h to
DIDMIB_P2_NIC_PRISUPRANGE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "P2" to ease readability and reduce
long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_p2_p2Static_p2CnfPortType in p80211metadef.h to
DIDMIB_P2_STATIC_CNFPORTTYPE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "P2" to ease readability and reduce
long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_p2_p2Static in p80211metadef.h to DIDMIB_P2_STATIC to
fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines. Also shorten name by removing repeated use of
"P2" to ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_cat_p2 in p80211metadef.h to DIDMIB_CAT_P2 to fix "Avoid
CamelCase" message from checkpatch and conform to the coding style
guidelines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_lnx_lnxConfigTable_lnxRSNAIE in p80211metadef.h to
DIDMIB_LNX_CONFIGTABLE_RSNAIE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "LNX" to ease readability and reduce
long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_lnx_lnxConfigTable in p80211metadef.h to
DIDMIB_LNX_CONFIGTABLE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "LNX" to ease readability and
reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_cat_lnx in p80211metadef.h to DIDMIB_CAT_LNX to fix
"Avoid CamelCase" message from checkpatch and conform to the coding
style guidelines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentChannel in
p80211metadef.h to DIDMIB_DOT11PHY_DSSSTABLE_CURRENTCHANNEL to fix
"Avoid CamelCase" message from checkpatch and conform to the coding
style guidelines. Also shorten name by removing repeated use of
"DOT11" and "DOT11PHY" to ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11phy_dot11PhyDSSSTable in p80211metadef.h to
DIDMIB_DOT11PHY_DSSSTABLE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "DOT11PHY" to ease readability and
reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11phy_dot11PhyTxPowerTable_dot11CurrentTxPowerLevel
in p80211metadef.h to DIDMIB_DOT11PHY_TXPOWERTABLE_CURRENTTXPOWERLEVEL
to fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines. Also shorten name by removing repeated use of
"DOT11" and "DOT11PHY" to ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11phy_dot11PhyOperationTable in p80211metadef.h to
DIDMIB_DOT11PHY_OPERATIONTABLE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "DOT11PHY" to ease readability and
reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_cat_dot11phy in p80211metadef.h to DIDMIB_CAT_DOT11PHY
to fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename
DIDmib_dot11mac_dot11OperationTable_dot11MaxTransmitMSDULifetime in
p80211metadef.h to
DIDMIB_DOT11MAC_OPERATIONTABLE_MAXTRANSMITMSDULIFETIME to fix "Avoid
CamelCase" message from checkpatch and conform to the coding style
guidelines. Also shorten name by removing repeated use of "DOT11" to
ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11mac_dot11OperationTable_dot11FragmentationThreshold
in p80211metadef.h to
DIDMIB_DOT11MAC_OPERATIONTABLE_FRAGMENTATIONTHRESHOLD to fix "Avoid
CamelCase" message from checkpatch and conform to the coding style
guidelines. Also shorten name by removing repeated use of "DOT11" to
ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11mac_dot11OperationTable_dot11LongRetryLimitin
p80211metadef.h to DIDMIB_DOT11MAC_OPERATIONTABLE_LONGRETRYLIMIT to
fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines. Also shorten name by removing repeated use of
"DOT11" to ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11mac_dot11OperationTable_dot11ShortRetryLimit in
p80211metadef.h to DIDMIB_DOT11MAC_OPERATIONTABLE_SHORTRETRYLIMIT to
fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines. Also shorten name by removing repeated use of
"DOT11" to ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11mac_dot11OperationTable_dot11RTSThreshold in
p80211metadef.h to DIDMIB_DOT11MAC_OPERATIONTABLE_RTSTHRESHOLD to fix
"Avoid CamelCase" message from checkpatch and conform to the coding
style guidelines. Also shorten name by removing repeated use of
"DOT11" to ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11mac_dot11OperationTable_dot11MACAddress in
p80211metadef.h to DIDMIB_DOT11MAC_OPERATIONTABLE_MACADDRESS to fix
"Avoid CamelCase" message from checkpatch and conform to the coding
style guidelines. Also shorten name by removing repeated use of
"DOT11" to ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11mac_dot11OperationTable in p80211metadef.h to
DIDMIB_DOT11MAC_OPERATIONTABLE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "DOT11" to ease readability and
reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted in
p80211metadef.h to DIDMIB_DOT11SMT_PRIVACYTABLE_EXCLUDEUNENCRYPTED to
fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines. Also shorten name by removing repeated use of
"DOT11" to ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID in
p80211metadef.h to DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID to fix
"Avoid CamelCase" message from checkpatch and conform to the coding
style guidelines. Also shorten name by removing repeated use of
"DOT11" to ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked to
DIDMIB_DOT11SMT_PRIVACYTABLE_PRIVACYINVOKED to fix "Avoid CamelCase"
message from checkpatch and conform to the coding style
guidelines. Also shorten name by removing repeated use of "DOT11" to
ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11smt_dot11PrivacyTable to
DIDMIB_DOT11SMT_PRIVACYTABLE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "DOT11" to ease readability and
reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11smt_dot11WEPDefaultKeysTable_key in p80211metadef.h
to didmib_dot11smt_wepdefaultkeystable_key to fix "Avoid CamelCase"
message from checkpatch and conform to the coding style
guidelines. Also shorten name by removing repeated use of "DOT11" to
ease readability and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_dot11smt_dot11WEPDefaultKeysTable in p80211metadef.h to
DIDMIB_DOT11SMT_WEPDEFAULTKEYSTABLE to fix "Avoid CamelCase" message
from checkpatch and conform to the coding style guidelines. Also
shorten name by removing repeated use of "DOT11" to ease readability
and reduce long lines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmib_cat_dot11smt in p80211metadef.h to DIDMIB_CAT_DOT11SMT
to fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmsg_p2req_flashdl_write in p80211metadef.h to
DIDMSG_P2REQ_FLASHDL_WRITE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmsg_p2req_flashdl_state in p80211metadef.h to
DIDMSG_P2REQ_FLASHDL_STATE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmsg_p2req_ramdl_write_resultcode in p80211metadef.h to
DIDMSG_P2REQ_RAMDL_WRITE_RESULTCODE to fix "Avoid CamelCase" message
from checkpatch and conform to the coding style guidelines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmsg_p2req_ramdl_write_data in p80211metadef.h to
DIDMSG_P2REQ_RAMDL_WRITE_DATA to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmsg_p2req_ramdl_write_len to DIDMSG_P2REQ_RAMDL_WRITE_LEN to
fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmsg_p2req_ramdl_write_addr in p80211metadef.h to
DIDMSG_P2REQ_RAMDL_WRITE_ADDR to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename DIDmsg_p2req_ramdl_write in p80211metadef.h to
DIDMSG_P2REQ_RAMDL_WRITE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>