Commit 1358c13a48 ("crypto: ccree - fix resume race condition on init")
was missing a "inline" qualifier for stub function used when CONFIG_PM
is not set causing a build warning.
Fixes: 1358c13a48 ("crypto: ccree - fix resume race condition on init")
Cc: stable@kernel.org # v4.20
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We were enabling autosuspend, which is using data set by the
hash module, prior to the hash module being inited, casuing
a crash on resume as part of the startup sequence if the race
was lost.
This was never a real problem because the PM infra was using low
res timers so we were always winning the race, until commit 8234f6734c
("PM-runtime: Switch autosuspend over to using hrtimers") changed that :-)
Fix this by seperating the PM setup and enablement and doing the
latter only at the end of the init sequence.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: stable@kernel.org # v4.20
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the ccree crypto driver to use crypto_authenc_extractkeys() so
that it picks up the fix for broken validation of rtattr::rta_len.
Fixes: ff27e85a85 ("crypto: ccree - add AEAD support")
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Arm TrustZone CryptoCell 703.
The 703 is a variant of the CryptoCell 713 that supports only
algorithms certified by the Chinesse Office of the State Commercial
Cryptography Administration (OSCCA).
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for SM3 cipher in CryptoCell 713.
Signed-off-by: Yael Chemla <yael.chemla@foss.arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
encapsulate set_cipher_mode call with another api,
preparation for specific hash behavior as needed in later patches
when SM3 introduced.
Signed-off-by: Yael Chemla <yael.chemla@foss.arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adjust hash length such that it will not be fixed and general for all algs.
Instead make it suitable for certain context information.
This is preparation for SM3 support.
Signed-off-by: Yael Chemla <yael.chemla@foss.arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for SM4 cipher in CryptoCell 713.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Arm TrustZone CryptoCell 713.
Note that this patch just enables using a 713 in backwards compatible mode
to 712. Newer 713 specific features will follow.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clang warns when one enumerated type is implicitly converted to another
and this happens in several locations in this driver, ultimately related
to the set_cipher_{mode,config0} functions. set_cipher_mode expects a mode
of type drv_cipher_mode and set_cipher_config0 expects a mode of type
drv_crypto_direction.
drivers/crypto/ccree/cc_ivgen.c:58:35: warning: implicit conversion from
enumeration type 'enum cc_desc_direction' to different enumeration type
'enum drv_crypto_direction' [-Wenum-conversion]
set_cipher_config0(&iv_seq[idx], DESC_DIRECTION_ENCRYPT_ENCRYPT);
drivers/crypto/ccree/cc_hash.c:99:28: warning: implicit conversion from
enumeration type 'enum cc_hash_conf_pad' to different enumeration type
'enum drv_crypto_direction' [-Wenum-conversion]
set_cipher_config0(desc, HASH_DIGEST_RESULT_LITTLE_ENDIAN);
drivers/crypto/ccree/cc_aead.c:1643:30: warning: implicit conversion
from enumeration type 'enum drv_hash_hw_mode' to different enumeration
type 'enum drv_cipher_mode' [-Wenum-conversion]
set_cipher_mode(&desc[idx], DRV_HASH_HW_GHASH);
Since this fundamentally isn't a problem because these values just
represent simple integers for a shift operation, make it clear to Clang
that this is okay by making the mode parameter in both functions an int.
Link: https://github.com/ClangBuiltLinux/linux/issues/46
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ccree driver had a sanity check that we are not asked
to encrypt an XTS buffer bigger than a sane sector size
since XTS IV needs to include the sector number in the IV
so this is not expected in any real use case.
Unfortunately, this breaks cryptsetup benchmark test which
has a synthetic performance test using 64k buffer of data
with the same IV.
Remove the sanity check and allow the user to hang themselves
and/or run benchmarks if they so wish.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In certain error path req_ctx->iv was being freed despite
not being allocated because it was not initialized to NULL.
Rather than play whack a mole with the structure various
field, zero it before use.
This fixes a kernel panic that may occur if an invalid
buffer size was requested triggering the bug above.
Fixes: 63ee04c8b4 ("crypto: ccree - add skcipher support")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
IV generation is not available via the skcipher interface.
Remove the left over support of it from the ablkcipher days.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop the explicit setting of CRYPTO_ALG_TYPE_AEAD or
CRYPTO_ALG_TYPE_SKCIPHER flags during alg registration as they are
set anyway by the framework.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A debug print about register status post interrupt can happen
quite often. Rate limit it to avoid cluttering the log.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ccree driver implemented NIST 800-38A CBC-CS2 ciphertext format,
which only reverses the last two blocks if the stolen ciphertext amount
are none zero. Move it to the kernel chosen format of CBC-CS3 which swaps
the final blocks unconditionally and rename it to "cts" now that it
complies with the kernel format and passes the self tests.
Ironically, the CryptoCell REE HW does just that, so the fix is dropping
the code that forced it to use plain CBC if the ciphertext was block
aligned.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove legacy code no longer used by anything.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We were copying our last cipher block into the request for use as IV for
all modes of operations. Fix this by discerning the behaviour based on
the mode of operation used: copy ciphertext for CBC, update counter for
CTR.
CC: stable@vger.kernel.org
Fixes: 63ee04c8b4 ("crypto: ccree - add skcipher support")
Reported by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
finup() operation was incorrect, padding was missing.
Fix by setting the ccree HW to enable padding.
Signed-off-by: Hadar Gat <hadar.gat@arm.com>
[ gilad@benyossef.com: refactored for better code sharing ]
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some skcipher algorithms set .cra_flags = CRYPTO_ALG_TYPE_SKCIPHER. But
this is redundant with the C structure type ('struct skcipher_alg'), and
crypto_register_skcipher() already sets the type flag automatically,
clearing any type flag that was already there. Apparently the useless
assignment has just been copy+pasted around.
So, remove the useless assignment from all the skcipher algorithms.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some ahash algorithms set .cra_type = &crypto_ahash_type. But this is
redundant with the C structure type ('struct ahash_alg'), and
crypto_register_ahash() already sets the .cra_type automatically.
Apparently the useless assignment has just been copy+pasted around.
So, remove the useless assignment from all the ahash algorithms.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many ahash algorithms set .cra_flags = CRYPTO_ALG_TYPE_AHASH. But this
is redundant with the C structure type ('struct ahash_alg'), and
crypto_register_ahash() already sets the type flag automatically,
clearing any type flag that was already there. Apparently the useless
assignment has just been copy+pasted around.
So, remove the useless assignment from all the ahash algorithms.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cache parameter register configuration was being too verbose.
Use dev_dbg() to only provide the information if needed.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use managed clock handling, differentiate between no clock (possibly OK)
and clock init failure (never OK) and correctly handle clock detection
being deferred.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The product signature and HW revision register have different offset on the
older HW revisions.
This fixes the problem of the driver failing sanity check on silicon
despite working on the FPGA emulation systems.
Fixes: 27b3b22dd9 ("crypto: ccree - add support for older HW revs")
Cc: stable@vger.kernel.org
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix incorrect use of %pad as a printk format string for none dma_addr_t
variable.
Discovered via smatch.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable CryptoCell support for hardware keys.
Hardware keys are regular AES keys loaded into CryptoCell internal memory
via firmware, often from secure boot ROM or hardware fuses at boot time.
As such, they can be used for enc/dec purposes like any other key but
cannot (read: extremely hard to) be extracted since since they are not
available anywhere in RAM during runtime.
The mechanism has some similarities to s390 secure keys although the keys
are not wrapped or sealed, but simply loaded offline. The interface was
therefore modeled based on the s390 secure keys support.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace memset to 0 followed by kfree with kzfree for
simplicity.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the legacy CryptoCell 630 and 710 revs.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove enum definition which are not used by the REE interface
driver.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add FIPS mode support to CryptoCell driver
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce basic low level Arm TrustZone CryptoCell HW support.
This first patch doesn't actually register any Crypto API
transformations, these will follow up in the next patch.
This first revision supports the CC 712 REE component.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
