Add code allowing for control of various power domains managed by GPCv2
IP block found in i.MX7 series of SoCs. Power domains covered by this
patch are:
- PCIE PHY
- MIPI PHY
- USB HSIC PHY
- USB OTG1/2 PHY
Support for any other power domain controlled by GPC is not present, and
can be added at some later point.
Testing of this code was done against a PCIe driver.
Cc: yurovsky@gmail.com
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Dong Aisheng <dongas86@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Introduce a ti_sci_pm_domains driver to act as a generic pm domain
provider to allow each device to attach and associate it's ti-sci-id so
that it can be controlled through the TI SCI protocol.
This driver implements a simple genpd where each device node has a
phandle to the power domain node and also must provide an index which
represents the ID to be passed with TI SCI representing the device using
a single phandle cell. The driver manually parses the phandle to get the
cell value. Through this interface the genpd dev_ops start and stop
hooks will use TI SCI to turn on and off each device as determined by
pm_runtime usage.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Tegra132 and Tegra210 support the flowctrl module and so add initial
support for these devices.
Please note that Tegra186 does not support the flowctrl module, so
update the initialisation function such that we do not fall back and
attempt to map the 'hardcoded' address range for Tegra186. Furthermore
64-bit Tegra devices have always had the flowctrl node defined in their
device-tree and so only use the 'hardcoded' addresses for 32-bit Tegra
devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a simple platform driver for the flowctrl module so that it gets
registered as a proper device.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The flowctrl driver is required for both ARM and ARM64 Tegra devices
and in order to enable support for it for ARM64, move the Tegra flowctrl
driver into drivers/soc/tegra.
By moving the flowctrl driver, tegra_flowctrl_init() is now called by
via an early initcall and to prevent this function from attempting to
mapping IO space for a non-Tegra device, a test for 'soc_is_tegra()'
is also added.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Makefiles currently controlling compilation of this code is:
drivers/soc/tegra/Makefile:obj-y += fuse/
drivers/soc/tegra/fuse/Makefile:obj-y += fuse-tegra.o
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The power management controller on Tegra186 has changed in backwards-
incompatible ways with respect to earlier generations. This implements a
new driver that supports inversion of the PMU interrupt as well as the
"recovery", "bootloader" and "forced-recovery" reboot commands.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
please pull the following changes:
- Florian updates the Broadcom STB GISB arbiter driver with a bunch of
compatible strings for MIPS-based STBs found under arch/mips/boot/dts/brcm/ in
order for the SoC identification driver to recognize these chips
-----BEGIN PGP SIGNATURE-----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=AueE
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.12/drivers' of http://github.com/Broadcom/stblinux into next/drivers
Pull "Broadcom drivers changes for 4.12" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoC drivers updates for 4.12,
please pull the following changes:
- Florian updates the Broadcom STB GISB arbiter driver with a bunch of
compatible strings for MIPS-based STBs found under arch/mips/boot/dts/brcm/ in
order for the SoC identification driver to recognize these chips
* tag 'arm-soc/for-4.12/drivers' of http://github.com/Broadcom/stblinux:
soc: bcm: brcmstb: Match additional compatible strings
With the RPM driver transitioned to RPMSG we can reuse the SMD-RPM
driver ontop of GLINK for 8996, without any modifications.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the standalone SMD implementation as we have transitioned the
client drivers to use the RPMSG based one.
Also remove all dependencies on QCOM_SMD from Kconfig files, in order to
keep them selectable in the absence of the removed symbol.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
By moving these client drivers to use RPMSG instead of the direct SMD
API we can reuse them ontop of the newly added GLINK wire-protocol
support found in the 820 and 835 Qualcomm platforms.
As the new (RPMSG-based) and old SMD implementations are mutually
exclusive we have to change all client drivers in one commit, to make
sure we have a working system before and after this transition.
Acked-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Export qman_query_fq_np() function and related structures.
This will be needed in the caam/qi driver, where "queue empty"
condition will be decided based on the frm_cnt.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add and export the ID of the channel serviced by the
CAAM (Cryptographic Acceleration and Assurance Module) DCP.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since qman_volatile_dequeue() is already exported, move the related
structures into the public header too.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is not really necessary to provide the current .readable_reg
implementation as we know what we're doing in our driver
and the regmap core has already done the partial check for
available maximum regs.
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Instead of GPC_PGC_PDN_OFFS, naming it as GPC_PGC_CTRL_OFFS which is
defined in reference manual for better reading.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The correct comment should be power up domain.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 721cabf6c6 ("soc: imx: move PGC handling to a new GPC driver")
broke the MX6SL GPC power domain support.
It always got the following error:
[ 1.248364] imx-gpc 20dc000.gpc: could not find pgc DT node
This patch adds back the legecy support.
Fixes: 721cabf6c6 ("soc: imx: move PGC handling to a new GPC driver")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ARRAY_SIZE(imx_gpc_domains) represents all power domains supported
by different SoCs. Driver should use SoC specific of_id_data->num_domains
instead to do power domain index sanity check.
e.g. MX6Q supports two power domains while MX6SL supports three.
Fixes: 721cabf6c6 ("soc: imx: move PGC handling to a new GPC driver")
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Without providing the proper reg_defaults, the regmap registers first
read out may be always 0 if enabling cache, which results in the
following issue we met.
e.g. During driver probe in imx6_pm_domain_power_on():
regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val);
The PGC_PUPSCR register val is always 0 but it's actually 0xf01 in HW.
Since GPC registers are tightly related to CPU bring up and may be
changed in bootloader, we don't want to provide defaults.
And the cache really does not save too much for GPC module.
Therefore, simply disable cache to fix the issue and make life easy.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Fixes: 721cabf6c6 ("soc: imx: move PGC handling to a new GPC driver")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Exynos Power Management Unit (PMU) drivers contain quite large
static arrays of register values necessary for given Exynos SoC to enter
low power mode. All this data is useless for ARMv8 SoC like
Exynos5433, because the image will not be shared between ARMv7 and
ARMv8.
Add additional Kconfig symbol for selecting the SoC-specific driver
addons thus skipping the useless data in the final image (this is
similar approach to chosen for Exynos clock controller drivers):
- exynos-pmu driver will be compiled on both architectures ARMv7
and ARMv8,
- additional driver_data for ARMv7 SoCs will not be built on ARMv8
and a macro will return NULL for them in of_device_id - this should
be safe as these compatibles cannot match on ARMv7 and driver
anyway handles NULL driver_data,
- on ARMv8 compile only exynos-pmu driver which exposes the
syscon-regmap for PMU address space.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Add support for identifying the RZ/G1N (r8a7744) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for identifying the RZ/G1H (r8a7742) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Remove .owner field if calls are used which set it automatically.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is an almost complete re-write of the previous GPC power gating control
code found in the IMX architecture code. It supports both the old and the new
DT binding, allowing more domains to be added later and generally makes the
driver easier to extend, while keeping compatibility with existing DTBs.
As the result, all functionality regarding the power gating controller
gets removed from the IMX architecture GPC driver. It keeps only the
IRQ controller code in the architecture, as this is closely coupled to
the CPU idle implementation.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Match all known sun-top-ctrl compatible strings from our MIPS chips
counterparts. This allows us to properly report the SoC information to
user-space through our SoC driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Driver updates for ARM SoCs.
A handful of driver changes this time around. The larger changes are:
- Reset drivers for hi3660 and zx2967
- AHCI driver for Davinci, acked by Tejun and brought in here due to
platform dependencies
- Cleanups of atmel-ebi (External Bus Interface)
- Tweaks for Rockchip GRF (General Register File) usage (kitchensink misc
register range on the SoCs)
- PM domains changes for support of two new ZTE SoCs (zx296718 and zx2967)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=od7u
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Driver updates for ARM SoCs.
A handful of driver changes this time around. The larger changes are:
- Reset drivers for hi3660 and zx2967
- AHCI driver for Davinci, acked by Tejun and brought in here due to
platform dependencies
- Cleanups of atmel-ebi (External Bus Interface)
- Tweaks for Rockchip GRF (General Register File) usage (kitchensink
misc register range on the SoCs)
- PM domains changes for support of two new ZTE SoCs (zx296718 and
zx2967)"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
soc: samsung: pmu: Add register defines for pad retention control
reset: make zx2967 explicitly non-modular
reset: core: fix reset_control_put
soc: samsung: pm_domains: Read domain name from the new label property
soc: samsung: pm_domains: Remove message about failed memory allocation
soc: samsung: pm_domains: Remove unused name field
soc: samsung: pm_domains: Use full names in subdomains registration log
sata: ahci-da850: un-hardcode the MPY bits
sata: ahci-da850: add a workaround for controller instability
sata: ahci: export ahci_do_hardreset() locally
sata: ahci-da850: implement a workaround for the softreset quirk
sata: ahci-da850: add device tree match table
sata: ahci-da850: get the sata clock using a connection id
soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register
memory: atmel-ebi: Enable the SMC clock if specified
soc: samsung: pmu: Remove unused and duplicated defines
memory: atmel-ebi: Properly handle multiple reference to the same CS
memory: atmel-ebi: Fix the test to enable generic SMC logic
soc: samsung: pm_domains: Add new Exynos5433 compatible
soc: samsung: pmu: Add dummy support for Exynos5433 SoC
...
In the SoC branch we normally collect classic arch/arm/mach-* contents, i.e.
C code changes for SoC platforms. This release cycle the diffstat is quite
nice, in that we're removing 3x the amount of code that's being added.
The main reason for this is that there's a removal of camera drivers for
Freescale i.MX chips (driver was removed so the device registration isn't
needed any more). There's also removal of display initialization code for OMAP
that is no longer needed.
The rest are mostly minor tweaks and cleanups; constification on Samsung
platforms, cleanup of ux500 platform data, purge of other unused platform
data/device seutp on i.MX and other good stuff.
New SoC support this cycle is for two Allwinner platforms, H2+ and V3s.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YE8v
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"In the SoC branch we normally collect classic arch/arm/mach-*
contents, i.e. C code changes for SoC platforms. This release cycle
the diffstat is quite nice, in that we're removing 3x the amount of
code that's being added.
The main reason for this is that there's a removal of camera drivers
for Freescale i.MX chips (driver was removed so the device
registration isn't needed any more). There's also removal of display
initialization code for OMAP that is no longer needed.
The rest are mostly minor tweaks and cleanups; constification on
Samsung platforms, cleanup of ux500 platform data, purge of other
unused platform data/device seutp on i.MX and other good stuff.
New SoC support this cycle is for two Allwinner platforms, H2+ and
V3s"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
ARM: ux500: remove deleted file from Makefile
ARM: ep93xx: Disable TS-72xx watchdog before uncompressing
ARM: ux500: cut some platform data
MAINTAINERS: Update for the current location of the bcm2835 tree.
ARM: davinci: remove BUG_ON() from da850_register_sata()
ARM: davinci: da850: model the SATA refclk
ARM: davinci: da850: add con_id for the SATA clock
ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA
arm: mvebu: support for SMP on 98DX3336 SoC
dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property
soc: dove: constify reset_control_ops structures
ARM: mv78xx0: fix possible PCI buffer overflow
MAINTAINERS: transfer maintainership for the EZX platform
ARM: shmobile: rcar-gen2: Add more register documentation
ARM: tegra: paz00: Fix __initdata placement
ARM: OMAP: clock: Remove unused mpurate cmdline option
ARM: davinci: add skeleton for pdata-quirks
arm: sunxi: add support for V3s SoC
ARM: OMAP2+: omap_hwmod: Add support for earlycon
arm: hisi: drop extern hip01_cpu_die
...
This introduces support for booting the dedicated sensor core in the
Qualcomm MSM8996, updates the Qualcomm ADSP and Hexagon drivers to
utilize SMD subdevice helpers for properly handle shutdowns and restarts
of the remoteproc, add virtio support to the ST remoteproc and refactor
the Qualcomm Hexagon driver to handle variations between platforms.
The support code for parsing, loading and authenticating Qualcomm
firmware files (MDT) is refactored and move to drivers/soc/qcom, to
allow for non-remoteproc drivers to utilize this.
Finally it brings some cleanups to the remoteproc core.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vAKB
-----END PGP SIGNATURE-----
Merge tag 'rproc-v4.11' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for booting the dedicated sensor core in the
Qualcomm MSM8996, updates the Qualcomm ADSP and Hexagon drivers to
utilize SMD subdevice helpers for properly handle shutdowns and
restarts of the remoteproc, add virtio support to the ST remoteproc
and refactor the Qualcomm Hexagon driver to handle variations between
platforms.
The support code for parsing, loading and authenticating Qualcomm
firmware files (MDT) is refactored and move to drivers/soc/qcom, to
allow for non-remoteproc drivers to utilize this.
Finally it brings some cleanups to the remoteproc core"
* tag 'rproc-v4.11' of git://github.com/andersson/remoteproc: (27 commits)
remoteproc: qcom: mdt_loader: Use signed type for offset
remoteproc: st: add virtio communication support
remoteproc: st: correct probe error management
remoteproc: Modify the function names
remoteproc: Reduce asynchronous request_firmware to auto-boot only
remoteproc: Drop qcom_scm_pas_supported() from adsp_probe()
MAINTAINERS: Add missing rpmsg include path
remoteproc: qcom: Use common SMD edge handler
remoteproc: qcom: wcnss: Make SMD handling common
remoteproc: Move qcom_mdt_loader into drivers/soc/qcom
remoteproc: qcom: mdt_loader: Refactor MDT loader
remoteproc: qcom: mdt_loader: Don't overwrite firmware object
remoteproc: qcom: Extract non-mdt related helper
remoteproc: qcom: q6v5: Decouple driver from MDT loader
remoteproc: qcom: q6v5: Remove mss supply from 8916
remoteproc: qcom: fix initializers for qcom_mss_reg_res array
remoteproc: Drop firmware_loading_complete
remoteproc: Add RPROC_DELETED state
remoteproc: Move rproc_delete_debug_dir() to rproc_del()
remoteproc: qcom: Add SLPI rproc support to load and boot slpi proc.
...
In the transition from using rproc_da_to_va(), the type of the load
offset became unsigned. This causes the subsequent check to let negative
values less than p_memsz + mem_size through and we write outside of the
buffer.
Change the type back to a signed value to catch this.
Fixes: 7f0dd07a9b ("remoteproc: qcom: mdt_loader: Refactor MDT loader")
Fixes: e7fd252262 ("remoteproc: qcom: q6v5: Decouple driver from MDT loader")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
power domain. Till now, the name of node from DT was used which mostly is just
"power-domain". We need more than that.
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJYk3brAAoJEME3ZuaGi4PXlLQP/jmi+uKo+1Ofc/X4r5flKuy7
s66sklaVUTFdZVDe7WjR8TW8alau90yM7mXSLi6iQkSBzoRgmkfB1j97PdzKiYj8
TKVGOfQSLcL/PqD0og+4yicPgaD2YfIJyeE5E0k3ETxQDi3+EVxdvcsjNEsYKA3n
V4TuWlTTbdOSRlqQBmH+VvECWMaYrT0Fn2j7lUX4jeAqlAj6NsQ7Ogq8pGPhikmF
rp2e/SMP1ZdylPsmHTTynpLE0PlkQ8Rwz2vYAu0YDL0rTCgqhIqctwZqPJ1pHwHW
/pw6X2nssPz3nzySWAvRQ3oyW2akWMq2Xibuu7RVI+iEj+rR5AeI6UUTZJ8DyY1H
uhzvXLMJ0XgkN5sobC+WUmA8T17s9tsYQHyFIOZdG8RmPwNa8zP4lJmBG4xOyfNG
xAJl/KhGJHIOrDotGpiovf8MqNEn/jPuiSK0jsFo2sLDNhdxJnOkcchAyGIGUGh1
b74TCgtMNTES50BZbWm0ijaSqk10CrI8wgkVomNLXdW7eGLLvISzLD5Fz/SNQev7
OJporWHONEFWWiH90hPns1ENW3KuEK29yZto9KtyojPAgWBCjSN2/X4vjH3h3rTv
Vca8ArtboFmLA1175oqvX+g6BGw4A0iCvQCgrZoTNRZSTwrbC4IEgImtWpg+n6YO
E5CNm5MIGjPlz9tSu1mX
=1AMJ
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-soc-pm-domains-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers
Pull "soc: samsung: pm_domains for v4.11" from Krzysztof Kozłowski:
Improve the PM domains driver for Exynos by displaying a user-friendly name of
power domain. Till now, the name of node from DT was used which mostly is just
"power-domain". We need more than that.
* tag 'samsung-drivers-soc-pm-domains-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: pm_domains: Read domain name from the new label property
soc: samsung: pm_domains: Remove message about failed memory allocation
soc: samsung: pm_domains: Remove unused name field
soc: samsung: pm_domains: Use full names in subdomains registration log
With the remoteproc parts cleaned out of the MDT loader we can move it
to drivers/soc/qcom.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Device tree nodes for each power domain should use generic "power-domain"
name, so using it as a domain name doesn't give much benefits. This patch
adds support for human readable names defined in 'label' property. Such
names are visible to userspace and makes debugging much easier. When no
'label' property is found, driver keeps using the name constructed from
full node name.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Memory subsystem already prints message about failed memory
allocation, there is no need to do it in the drivers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Name is now in generic pm domain structure, so there is no need to
duplicate it in private data.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Device tree none name for each power domain should be "power-domain", so
use a bit more descriptive full node name in messages about subdomain
registration. This way the following meaningless message:
power-domain has as child subdomain: power-domain.
is changed to a bit more meaningful one:
/soc/power-domain@105c40a0 has as child subdomain: /soc/power-domain@105c4020.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
1. Add support for Exynos5433 to Power Management Unit (PMU) and Power
Domains drivers.
2. Cleanups of duplicated and unused defines.
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJYjkgyAAoJEME3ZuaGi4PXtVoP/3TJmoi6z6Qmxc9Ux6ATmNKO
KhEM2u5si2psK6DD6YNrmC9st3C2dnhiej6g6KG3dK7WVrSQigjZCCQurFWccx0M
BE5Dr/A9hhJtwLOdLwCcS1Fywv0aFuCEh2F6Jgq6lCs1Z/EFuxZ9DflDLdimakvc
18hyC2kLN3cb7ME10Zr+YMaG5GaoimP5mkUX1czJcaSWtVoXFCW6H9j4QQg2geE1
0sPBjKx4bHEah8LfsckijdwyamE7wGVzDslq+YVAMqPstW781FSFAlNGe2cc+Xlj
GPJfgtgVZYdu4meRZwbli9T4RslsqULPYDUFRoq+ffp1Hrp7kXoBL5jFYK0W9gjD
Sgm/oFGpymIY/GdwyTzYSHPeNxK8RtmNkC3WDY4JY6gn8BcK3mvK/4M9NAQw1fWn
2A+eZjZr+AsyoNJtNk69mjYweSJmJ+pFBnni8ygrejq5FYfwVXD6OenvAxqQ7RDG
aC2OuXhjr1BMoq5hiYen3Eh3b1Okftlu3f6/SVi2h8Ct5W4oK8c08dvbmpOYB3hk
jeEMnh45PkoXHG7vMTU14euJVlTxhhTQ/hFSl21Ous6LdrxaZBQFsrszKma5wtvJ
a9mAzonRJPXH/4Gt6kYOe90VDWp0SWFkOaA1zeIOdVnC0ifn7rZls6df6R6coKDY
3g0X2xPhQiywSSa6Hq1T
=pXm9
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-soc-pmu-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers
Continuation of improvements for Exynos PM drivers for v4.11:
1. Add support for Exynos5433 to Power Management Unit (PMU) and Power
Domains drivers.
2. Cleanups of duplicated and unused defines.
* tag 'samsung-drivers-soc-pmu-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register
soc: samsung: pmu: Remove unused and duplicated defines
soc: samsung: pm_domains: Add new Exynos5433 compatible
soc: samsung: pmu: Add dummy support for Exynos5433 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
- It includes a series which adds DT bindings and PM domain driver for
PCU (Power Control Unit) block found on ZTE ZX2967 family SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjW7hAAoJEFBXWFqHsHzOCN8H/jVJo7Rnx4zwL8sx+2pjuceN
ecTTu2l9U5Nh2Y1uRqDf914rquJteDNYoe0oWz71W7UxpJMl20X3zjfso7SWDqx8
uSEgad6V/qHkgQQnLL9S9WdFQEGhfjVYvnMoVjBQEb1jpwdIm+nr8PIZ+Fqhh8u0
3OLOjXk40PvzKcYwkxqeJQajP0pE6UFUOXQesolcCr+ilTvoqqQ9chPY4Jvsc7Qf
ffC+ueSUymAhIqof2kEfy3PS5NA/ltQjokDpKjvU2+e3uJtM3qwstzt1kPCgX/d7
azOuNNdif4hT2J26qIBG5H/wS/dFEvxnA0P4J/XUwkQ4FPRpa2Er1+F+03n5sPc=
=XwPV
-----END PGP SIGNATURE-----
Merge tag 'zte-pd-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
ZTE PM domain driver support for 4.11:
- It includes a series which adds DT bindings and PM domain driver for
PCU (Power Control Unit) block found on ZTE ZX2967 family SoC.
* tag 'zte-pd-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: zte: pm_domains: Add support for zx296718
soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 family
soc: zte: Add header for PM domains specifiers
MAINTAINERS: add zx2967 SoC drivers to ARM ZTE architecture
dt-bindings: zte: add bindings document for zx2967 power domain controller
Signed-off-by: Olof Johansson <olof@lixom.net>
We don't currently have anything else for drivers/soc to
merge, but I'd expect that to change as soon as we can start
moving PM code into drivers with the recently posted SRAM
changes. Anyways, sent as a separate pull request to make
it easy to group the ARM SoC pull requests.
-----BEGIN PGP SIGNATURE-----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=2tPW
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.11/drivers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
Just a single wkup_m3_ipc clean-up for v4.11 merge window.
We don't currently have anything else for drivers/soc to
merge, but I'd expect that to change as soon as we can start
moving PM code into drivers with the recently posted SRAM
changes. Anyways, sent as a separate pull request to make
it easy to group the ARM SoC pull requests.
* tag 'omap-for-v4.11/drivers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
soc: ti: wkup_m3_ipc: Drop wait from wkup_m3_rproc_boot_thread
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=n43y
-----END PGP SIGNATURE-----
Merge tag 'keystone_soc_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers
Couple of minor cleanups for Navigator drivers for 4.11
* tag 'keystone_soc_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
soc: ti: knav: cleanup includes and sort header files
soc: ti: knav_dma: fix typos in trace message
Signed-off-by: Olof Johansson <olof@lixom.net>
hiword registers (write-mask in upper 16bit) and domain-definitions
for the rk3328 soc.
Secondly a "driver" that attaches to the already existing grf nodes
and is able to set static defaults for settings that cannot really
be attached to any specific subsystem.
Most GRF settings can already be set from drivers using them, but there
are some behavioural settings like the mmc/jtag switch that cannot.
As the commit message states this is really meant as a last line
of defence for things that neither belong to a subsystem nor to the
Having this here allows arm64 socs to have this as well and also
moves another bit of code out of the arm32 mach-rockchip.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAliBTccQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgdMAB/42pPY0pKqOWlAfqzTSlIh98vi9jp0nZUu+
6RMlaqewhHq/zbH0qqJdcBrYRZF+EmJpTDGG2nltNi8FLNMyr+y7a0FVyjk/u43L
FnYELcDm7yeCZ0012ZP/4hlhWI9YizojbIKH4p2o8nIj64CS132ZMVVgojyzvVc1
0WLWUf8FBiMqsBpa6Kl117pvKayagk79PM570Ee2kRBxanN8yQaKmXTqG670eKzo
7nar1VGAubAVpCZfbv4opugGfrjYPJFX4gcu3yJvtRRN+hTt6idRP40YoCMZSVds
+okL0XW4G70ioXqZBS59Wq5FJS7frr8HRJbYD8lZg2vF948ZQnbC
=4aXM
-----END PGP SIGNATURE-----
Merge tag 'v4.11-armsoc-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers
Some extensions to the power-domain driver to support domains in
hiword registers (write-mask in upper 16bit) and domain-definitions
for the rk3328 soc.
Secondly a "driver" that attaches to the already existing grf nodes
and is able to set static defaults for settings that cannot really
be attached to any specific subsystem.
Most GRF settings can already be set from drivers using them, but there
are some behavioural settings like the mmc/jtag switch that cannot.
As the commit message states this is really meant as a last line
of defence for things that neither belong to a subsystem nor to the
Having this here allows arm64 socs to have this as well and also
moves another bit of code out of the arm32 mach-rockchip.
* tag 'v4.11-armsoc-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: drop rk3288 jtag/mmc switch handling
soc: rockchip: add driver handling grf setup
dt-bindings: add used but undocumented rockchip grf compatible values
soc: rockchip: power-domain: add power domain support for rk3328
dt-bindings: add binding for rk3328 power domains
dt-bindings: power: add RK3328 SoCs header for idle-request
soc: rockchip: power-domain: Support domain control in hiword-registers
Signed-off-by: Olof Johansson <olof@lixom.net>
Declare reset_control_ops as const as they are only stored in the ops
field of a reset_controller_dev structure. This field is of type const
struct reset_control_ops *, so reset_control_ops structures having this
property can be declared as const.
Done using Coccinelle:
@r1 disable optional_qualifier@
identifier i;
position p;
@@
static struct reset_control_ops i@p={...};
@ok1@
identifier r1.i;
position p;
struct reset_controller_dev x;
@@
x.ops=&i@p;
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct reset_control_ops i;
File size before: drivers/soc/dove/pmu.o
text data bss dec hex filename
2447 112 16 2575 a0f drivers/soc/dove/pmu.o
File size after: drivers/soc/dove/pmu.o
text data bss dec hex filename
2479 80 16 2575 a0f drivers/soc/dove/pmu.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The register ARM_L2_OPTION (0x2608 in Exynos4 and Exynos5 PMU) was
defined twice. Both names were used in the Exynos542x code. Simplify
this.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add a new compatible string for Exynos5433 because it uses the 0xf
value instead of 0x7 for domain on/off registers.
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add compatible for Exynos5433 SoC, so the driver will bind and let other
drivers to use PMU regmap.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Memory subsystem already prints message about failed memory
allocation, there is no need to do it in the driver.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Replace custom code with generic helper to retrieve driver data.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
PMU is something like a SoC wide service, so add a helper function to get
PMU regmap. This will be used by other Exynos device drivers. This way it
can be avoided to model this dependency in device tree (as phandles to PMU
node) for almost every device in the SoC.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Fix to return a negative error code from the kthread_run() error
handling case instead of 0, as done elsewhere in this function.
Fixes: cdd5de500b ("soc: ti: Add wkup_m3_ipc driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch introduces the power domain driver of zx296718
which belongs to zte's zx2967 family.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ARMv8 zx2967 family (296718, 296716 etc) uses different value
for controlling the power domain on/off registers, Choose the
value depending on the compatible.
Multiple domains are prepared for the family, this patch prepares
the common functions.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch cleanup the code to remove unnecessary header files and
also sort the header files.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
This patch fixes some typos in the trace message
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The function wkup_m3_rproc_boot_thread waits for asynchronous
firmware loading to parse the resource table before calling
rproc_boot(). However, as the resource table parsing has been
moved to rproc_boot(), there's no need to wait for the
asynchronous firmware loading completion. So, drop this.
CC: Dave Gerlach <d-gerlach@ti.com>
CC: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The General Register Files are an area of registers containing a lot
of single-bit settings for numerous components as well full components
like usbphy control. Therefore all used components are accessed
via the syscon provided by the grf nodes or from the sub-devices
created through the simple-mfd created from the grf node.
Some settings are not used by anything but will need to be set up
according to expectations on the kernel side.
Best example is the force_jtag setting, which defaults to on and
results in the soc switching the pin-outputs between jtag and sdmmc
automatically depending on the card-detect status. This conflicts
heavily with how the dw_mmc driver expects to do its work and also
with the clock-controller, which has most likely deactivated the
jtag clock due to it being unused.
So far the handling of this setting was living in the mach-rockchip
code for the arm32-based rk3288 but that of course doesn't work
for arm64 socs and would also look ugly for further arm32 socs.
Also always disabling this setting is quite specific to linux and
its subsystems, other operating systems might prefer other settings,
so that the bootloader cannot really set a sane default for all.
So introduce a top-level driver for the grf that handles these
settings that need to be a certain way but nobody cares about.
Other needed settings might surface in the future and can then
be added here, but only as a last option. Ideally general GRF
settings should be handled in the driver needing them.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
The rk3328 uses the newly introduced support for power-domain control
in hiword-mask registers.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
New Rockchips SoCs may have their power-domain control in registers
using a writemask-based access scheme (upper 16bit being the write
mask). So add a DOMAIN_M type and handle this case accordingly.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Highlights include:
- Support for the kexec_file_load() syscall, which is a prereq for secure and
trusted boot.
- Prevent kernel execution of userspace on P9 Radix (similar to SMEP/PXN).
- Sort the exception tables at build time, to save time at boot, and store
them as relative offsets to save space in the kernel image & memory.
- Allow building the kernel with thin archives, which should allow us to build
an allyesconfig once some other fixes land.
- Build fixes to allow us to correctly rebuild when changing the kernel endian
from big to little or vice versa.
- Plumbing so that we can avoid doing a full mm TLB flush on P9 Radix.
- Initial stack protector support (-fstack-protector).
- Support for dumping the radix (aka. Linux) and hash page tables via debugfs.
- Fix an oops in cxl coredump generation when cxl_get_fd() is used.
- Freescale updates from Scott: "Highlights include 8xx hugepage support,
qbman fixes/cleanup, device tree updates, and some misc cleanup."
- Many and varied fixes and minor enhancements as always.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual,
Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz, Christophe Jaillet,
Christophe Leroy, Denis Kirjanov, Elimar Riesebieter, Frederic Barrat,
Gautham R. Shenoy, Geliang Tang, Geoff Levand, Jack Miller, Johan Hovold,
Lars-Peter Clausen, Libin, Madhavan Srinivasan, Michael Neuling, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin,
Rashmica Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj
Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xOzf
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights include:
- Support for the kexec_file_load() syscall, which is a prereq for
secure and trusted boot.
- Prevent kernel execution of userspace on P9 Radix (similar to
SMEP/PXN).
- Sort the exception tables at build time, to save time at boot, and
store them as relative offsets to save space in the kernel image &
memory.
- Allow building the kernel with thin archives, which should allow us
to build an allyesconfig once some other fixes land.
- Build fixes to allow us to correctly rebuild when changing the
kernel endian from big to little or vice versa.
- Plumbing so that we can avoid doing a full mm TLB flush on P9
Radix.
- Initial stack protector support (-fstack-protector).
- Support for dumping the radix (aka. Linux) and hash page tables via
debugfs.
- Fix an oops in cxl coredump generation when cxl_get_fd() is used.
- Freescale updates from Scott: "Highlights include 8xx hugepage
support, qbman fixes/cleanup, device tree updates, and some misc
cleanup."
- Many and varied fixes and minor enhancements as always.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman
Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz,
Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar
Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff
Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin,
Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N.
Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica
Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj
Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain"
[ And thanks to Michael, who took time off from a new baby to get this
pull request done. - Linus ]
* tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits)
powerpc/fsl/dts: add FMan node for t1042d4rdb
powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb
powerpc/fsl/dts: add QMan and BMan nodes on t1024
powerpc/fsl/dts: add QMan and BMan nodes on t1023
soc/fsl/qman: test: use DEFINE_SPINLOCK()
powerpc/fsl-lbc: use DEFINE_SPINLOCK()
powerpc/8xx: Implement support of hugepages
powerpc: get hugetlbpage handling more generic
powerpc: port 64 bits pgtable_cache to 32 bits
powerpc/boot: Request no dynamic linker for boot wrapper
soc/fsl/bman: Use resource_size instead of computation
soc/fsl/qe: use builtin_platform_driver
powerpc/fsl_pmc: use builtin_platform_driver
powerpc/83xx/suspend: use builtin_platform_driver
powerpc/ftrace: Fix the comments for ftrace_modify_code
powerpc/perf: macros for power9 format encoding
powerpc/perf: power9 raw event format encoding
powerpc/perf: update attribute_group data structure
powerpc/perf: factor out the event format field
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown
...
Driver updates for ARM SoCs, including a couple of newly added drivers:
- A new driver for the power management controller on TI Keystone
- Support for the prerelease "SCPI" firmware protocol that ended up
being shipped by Amlogic in their GXBB SoC.
- A soc_device can now be matched using a glob from inside the
kernel, when another driver wants to know the specific chip
it is running on and cannot find out from DT, firmware or hardware.
- Renesas SoCs now support identification through the soc_device
interface, both in user space and kernel.
- Renesas r8a7743 and r8a7745 gain support for their system controller
- A new checking module for the ARM "PSCI" (not to be confused
with "SCPI" mentioned above) firmware interface.
- A new driver for the Tegra GMI memory interface
- Support for the Tegra firmware interfaces with their
power management controllers
As usual, the updates for the reset controller framework are merged
here, as they tend to touch multiple SoCs as well, including a new
driver for the Oxford (now Broadcom) OX820 chip and the Tegra
bpmp interface.
The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
Rockchips SoCs see some further updates.
Conflicts:
- ARCH_RENESAS now selects SOC_BUS, but no longer needs GPIOLIB
- drivers/soc/renesas/Makefile: multiple files got added, keep
all in logical sorting
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6dP8
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Driver updates for ARM SoCs, including a couple of newly added
drivers:
- A new driver for the power management controller on TI Keystone
- Support for the prerelease "SCPI" firmware protocol that ended up
being shipped by Amlogic in their GXBB SoC.
- A soc_device can now be matched using a glob from inside the
kernel, when another driver wants to know the specific chip it is
running on and cannot find out from DT, firmware or hardware.
- Renesas SoCs now support identification through the soc_device
interface, both in user space and kernel.
- Renesas r8a7743 and r8a7745 gain support for their system
controller
- A new checking module for the ARM "PSCI" (not to be confused with
"SCPI" mentioned above) firmware interface.
- A new driver for the Tegra GMI memory interface
- Support for the Tegra firmware interfaces with their power
management controllers
As usual, the updates for the reset controller framework are merged
here, as they tend to touch multiple SoCs as well, including a new
driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp
interface.
The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
Rockchips SoCs see some further updates"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
misc: sram: remove useless #ifdef
drivers: psci: Allow PSCI node to be disabled
drivers: psci: PSCI checker module
soc: renesas: Identify SoC and register with the SoC bus
firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails
firmware: qcom: scm: Remove core, iface and bus clocks dependency
dt-bindings: firmware: scm: Add MSM8996 DT bindings
memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name()
bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()
ARM: shmobile: Document DT bindings for Product Register
soc: renesas: rcar-sysc: add R8A7745 support
reset: Add Tegra BPMP reset driver
dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
dt-bindings: Add power domains to Tegra BPMP firmware
firmware: tegra: Add BPMP support
firmware: tegra: Add IVC library
dt-bindings: firmware: Add bindings for Tegra BPMP
mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
mailbox: Add Tegra HSP driver
firmware: arm_scpi: add support for pre-v1.0 SCPI compatible
...
As usual, we queue up a few fixes that don't seem urgent enough to go in
through -rc, or that just came a little too late given their size.
The zx fixes make the platform finally boot on real hardware, the
davinci and imx31 get the DT support working better for some of
the machines that are still normally used with classic board files.
One tegra fix is important for new bootloader versions, but the
bug has been around for a while without anyone noticing.
The other changes are mostly cosmetic.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=i2l2
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-urgent fixes from Arnd Bergmann:
"As usual, we queue up a few fixes that don't seem urgent enough to go
in through -rc, or that just came a little too late given their size.
The zx fixes make the platform finally boot on real hardware, the
davinci and imx31 get the DT support working better for some of the
machines that are still normally used with classic board files. One
tegra fix is important for new bootloader versions, but the bug has
been around for a while without anyone noticing.
The other changes are mostly cosmetic"
* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
arm64: tegra: Add missing Smaug revision
arm64: tegra: Add VDD_GPU regulator to Jetson TX1
arm64: dts: zte: clean up gic-v3 redistributor properties
arm64: dts: zx: Fix gic GICR property
bus: vexpress-config: fix device reference leak
soc: ti: qmss: fix the case when !SMP
ARM: lpc32xx: drop duplicate header device.h
ARM: ixp4xx: drop duplicate header gpio.h
ARM: socfpga: fix spelling mistake in error message
ARM: dts: imx6q-cm-fx6: fix fec pinctrl
ARM: dts: imx7d-pinfunc: fix UART pinmux defines
ARM: dts: imx6qp: correct LDB clock inputs
ARM: OMAP2+: pm-debug: Use seq_putc() in two functions
ARM: OMAP2+: Remove the omapdss_early_init_of() function
mfd: tps65217: Fix mismatched interrupt number
ARM: zx: Fix error handling
ARM: spear: Fix error handling
ARM: davinci: da850: Fix pwm name matching
ARM: clk: imx31: properly init clocks for machines with DT
clk: imx31: fix rewritten input argument of mx31_clocks_init()
...
framework. The only patch that can even be considered "core" adds another
clk_get() variant. The rest of the changes are in drivers for various SoCs, and
we have a few bits for ARM shmobile architecture code (dts and mach) due to the
dependency we're breaking between shmobile architecture code and its clk
driver. Those shmobile bits have also been pulled into arm-soc tree. Here's the
summary:
Core:
- Support for devm_get_clk_from_child() used with DT bindings that have
subnodes with the 'clocks' property
New Drivers:
- Allwinner A64 (sun50i)
- i.MX imx6ull
- Socionext's UniPhier SoC CPUs
- Mediatek MT2701 SoCs
- Rockchip rk1108 SoCs
- Qualcomm MSM8994/MSM8992 SoCS
- Qualcomm RPM Clocks
- Hisilicon Hi3516CV300 and Hi3798CV200 CRG
- Oxford Semiconductor OX820 and OX810SE SoCs
- Renesas RZ/G1M and RZ/GIE SoCs
- Renesas R-Car RST driver for mode pin states
Updates:
- Four Allwinner SoCs are migrated to the new style clk driver
- Rockchip rk3399,rk3066 PLL optimizations
- i.MX LVDS display glitch fixes and AV PLL precision improvements
- Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL support
- Explicit demodularization of always builtin drivers
- Freescale Qoriq ls1012a and ls1046a support
- Exynos 5433 parent typo fix and critical clock tagging
- Renesas r8a7743/r8a7745 CPG
- Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support
- stm32f4* LSI, LSE, RTC, and QSPI clocks
- pxa27x and pxa25x cpufreq as clks
- TI omap36xx sprz319 advisory 2.1 workaround
- Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=RXZr
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is a fairly quiet release. We don't have any patches to the core
framework. The only patch that can even be considered "core" adds
another clk_get() variant. The rest of the changes are in drivers for
various SoCs, and we have a few bits for ARM shmobile architecture
code (dts and mach) due to the dependency we're breaking between
shmobile architecture code and its clk driver. Those shmobile bits
have also been pulled into arm-soc tree. Here's the summary:
Core:
- Support for devm_get_clk_from_child() used with DT bindings that
have subnodes with the 'clocks' property
New Drivers:
- Allwinner A64 (sun50i)
- i.MX imx6ull
- Socionext's UniPhier SoC CPUs
- Mediatek MT2701 SoCs
- Rockchip rk1108 SoCs
- Qualcomm MSM8994/MSM8992 SoCS
- Qualcomm RPM Clocks
- Hisilicon Hi3516CV300 and Hi3798CV200 CRG
- Oxford Semiconductor OX820 and OX810SE SoCs
- Renesas RZ/G1M and RZ/GIE SoCs
- Renesas R-Car RST driver for mode pin states
Updates:
- Four Allwinner SoCs are migrated to the new style clk driver
- Rockchip rk3399,rk3066 PLL optimizations
- i.MX LVDS display glitch fixes and AV PLL precision improvements
- Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL
support
- Explicit demodularization of always builtin drivers
- Freescale Qoriq ls1012a and ls1046a support
- Exynos 5433 parent typo fix and critical clock tagging
- Renesas r8a7743/r8a7745 CPG
- Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support
- stm32f4* LSI, LSE, RTC, and QSPI clocks
- pxa27x and pxa25x cpufreq as clks
- TI omap36xx sprz319 advisory 2.1 workaround
- Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate()
clk: add devm_get_clk_from_child() API
clk: st: clk-flexgen: Unmap region obtained by of_iomap
clk: keystone: pll: Unmap region obtained by of_iomap
clk:mmp:clk-of-mmp2: Free memory and Unmap region obtained by kzalloc and of_iomap
clk:mmp:clk-of-pxa910: Free memory and Unmap region obtained by kzmalloc and of_iomap
clk: mmp: clk-of-pxa1928: Free memory obtained by kzalloc
clk: cdce925: Fix limit check
clk: bcm: Make COMMON_CLK_IPROC into a library
clk: qoriq: added ls1012a clock configuration
clk: ti: dra7: fix "failed to lookup clock node gmac_gmii_ref_clk_div" boot message
clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock
clk: bcm: Support rate change propagation on bcm2835 clocks
clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk
clk: ti: omap36xx: Work around sprz319 advisory 2.1
clk: clk-wm831x: fix a logic error
clk: uniphier: add cpufreq data for LD11, LD20 SoCs
clk: uniphier: add CPU-gear change (cpufreq) support
clk: qcom: Put venus core0/1 gdscs to hw control mode
clk: qcom: gdsc: Add support for gdscs with HW control
...
mmc host drivers, some existing drivers being extended to support new IP
versions and lots of other updates.
MMC core:
- Delete eMMC packed command support
- Introduce mmc_abort_tuning() to enable eMMC tuning to fail gracefully
- Introduce mmc_can_retune() to see if a host can be retuned
- Re-work and improve the sequence when sending a CMD6 for mmc
- Enable CDM13 polling when switching to HS and HS DDR mode for mmc
- Relax checking for CMD6 errors after switch to HS200
- Re-factoring the code dealing with the mmc block queue
- Recognize whether the eMMC card supports CMDQ
- Fix 4K native sector check
- Don't power off the card when starting the host
- Increase MMC_IOC_MAX_BYTES to support bigger firmware binaries
- Improve error handling and drop meaningless BUG_ONs()
- Lots of clean-ups and changes to improve the quality of the code
MMC host:
- sdhci: Fix tuning sequence and clean-up the related code
- sdhci: Add support to via DT override broken SDHCI cap register bits
- sdhci-cadence: Add new driver for Cadence SD4HC SDHCI variant
- sdhci-msm: Update clock management
- sdhci-msm: Add support for eMMC HS400 mode
- sdhci-msm: Deploy runtime/system PM support
- sdhci-iproc: Extend driver support to newer IP versions
- sdhci-pci: Add support for Intel GLK
- sdhci-pci: Add support for Intel NI byt sdio
- sdhci-acpi: Add support for 80860F14 UID 2 SDIO bus
- sdhci: Lots of various small improvements and clean-ups
- tmio: Add support for tuning
- sh_mobile_sdhi: Add support for tuning
- sh_mobile_sdhi: Extend driver to support SDHI IP on R7S72100 SoC
- sh_mobile_sdhi: remove support for sh7372
- davinci: Use mmc_of_parse() to enable generic mmc DT bindings
- meson: Add new driver to support GX platforms
- dw_mmc: Deploy generic runtime/system PM support
- dw_mmc: Lots of various small improvements
As a part of the mmc changes this time, I have also pulled in an immutable
branch/tag (soc-device-match-tag1) hosted by Geert Uytterhoeven, to share the
implementation of the new soc_device_match() interface. This is needed by the
below mmc related changes:
- mmc: sdhci-of-esdhc: Get correct IP version for T4240-R1.0-R2.0
- soc: fsl: add GUTS driver for QorIQ platforms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wGE2
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"It's been an busy period for mmc. Quite some changes in the mmc core,
two new mmc host drivers, some existing drivers being extended to
support new IP versions and lots of other updates.
MMC core:
- Delete eMMC packed command support
- Introduce mmc_abort_tuning() to enable eMMC tuning to fail
gracefully
- Introduce mmc_can_retune() to see if a host can be retuned
- Re-work and improve the sequence when sending a CMD6 for mmc
- Enable CDM13 polling when switching to HS and HS DDR mode for mmc
- Relax checking for CMD6 errors after switch to HS200
- Re-factoring the code dealing with the mmc block queue
- Recognize whether the eMMC card supports CMDQ
- Fix 4K native sector check
- Don't power off the card when starting the host
- Increase MMC_IOC_MAX_BYTES to support bigger firmware binaries
- Improve error handling and drop meaningless BUG_ONs()
- Lots of clean-ups and changes to improve the quality of the code
MMC host:
- sdhci: Fix tuning sequence and clean-up the related code
- sdhci: Add support to via DT override broken SDHCI cap register
bits
- sdhci-cadence: Add new driver for Cadence SD4HC SDHCI variant
- sdhci-msm: Update clock management
- sdhci-msm: Add support for eMMC HS400 mode
- sdhci-msm: Deploy runtime/system PM support
- sdhci-iproc: Extend driver support to newer IP versions
- sdhci-pci: Add support for Intel GLK
- sdhci-pci: Add support for Intel NI byt sdio
- sdhci-acpi: Add support for 80860F14 UID 2 SDIO bus
- sdhci: Lots of various small improvements and clean-ups
- tmio: Add support for tuning
- sh_mobile_sdhi: Add support for tuning
- sh_mobile_sdhi: Extend driver to support SDHI IP on R7S72100 SoC
- sh_mobile_sdhi: remove support for sh7372
- davinci: Use mmc_of_parse() to enable generic mmc DT bindings
- meson: Add new driver to support GX platforms
- dw_mmc: Deploy generic runtime/system PM support
- dw_mmc: Lots of various small improvements
As a part of the mmc changes this time, I have also pulled in an
immutable branch/tag (soc-device-match-tag1) hosted by Geert
Uytterhoeven, to share the implementation of the new
soc_device_match() interface. This is needed by these mmc related
changes:
- mmc: sdhci-of-esdhc: Get correct IP version for T4240-R1.0-R2.0
- soc: fsl: add GUTS driver for QorIQ platforms"
* tag 'mmc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (136 commits)
mmc: sdhci-cadence: add Cadence SD4HC support
mmc: sdhci: export sdhci_execute_tuning()
mmc: sdhci: Tidy tuning loop
mmc: sdhci: Simplify tuning block size logic
mmc: sdhci: Factor out tuning helper functions
mmc: sdhci: Use mmc_abort_tuning()
mmc: mmc: Introduce mmc_abort_tuning()
mmc: sdhci: Always allow tuning to fall back to fixed sampling
mmc: sdhci: Fix tuning reset after exhausting the maximum number of loops
mmc: sdhci: Fix recovery from tuning timeout
Revert "mmc: sdhci: Reset cmd and data circuits after tuning failure"
mmc: mmc: Relax checking for switch errors after HS200 switch
mmc: sdhci-acpi: support 80860F14 UID 2 SDIO bus
mmc: sdhci-of-at91: remove bogus MMC_SDHCI_IO_ACCESSORS select
mmc: sdhci-pci: Use ACPI to get max frequency for Intel NI byt sdio
mmc: sdhci-pci: Add PCI ID for Intel NI byt sdio
mmc: sdhci-s3c: add spin_unlock_irq() before calling clk_round_rate
mmc: dw_mmc: display the clock message only one time when card is polling
mmc: dw_mmc: add the debug message for polling and non-removable
mmc: dw_mmc: check the "present" variable before checking flags
...
Use resource_size function on resource object
instead of explicit computation.
Generated by: scripts/coccinelle/api/resource_size.cocci
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use builtin_platform_driver() helper to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Install the callbacks via the state machine.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Scott Wood <oss@buserror.net>
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Cc: rt@linutronix.de
Cc: Roy Pledge <roy.pledge@nxp.com>
Link: http://lkml.kernel.org/r/20161126231350.10321-21-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Install the callbacks via the state machine.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Scott Wood <oss@buserror.net>
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Cc: rt@linutronix.de
Cc: Roy Pledge <roy.pledge@nxp.com>
Link: http://lkml.kernel.org/r/20161126231350.10321-20-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The irq_set_affinity_hint() will always fail when !SMP and
Networking will fail on Keystone 2 devices in this case.
Hence, fix by ignoring IRQ affinity settings when !SMP.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Identify SoC and register with the SoC bus
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DnnT
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc-match-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Merge "Renesas ARM Based SoC Match Updates for v4.10" from Simon Horman:
* Identify SoC and register with the SoC bus
* tag 'renesas-soc-match-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: Identify SoC and register with the SoC bus
ARM: shmobile: Document DT bindings for Product Register
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Add support for the r8a7745 SoC to rcar-sysc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pOb+
-----END PGP SIGNATURE-----
Merge tag 'renesas-r8a7745-sysc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Pull "Renesas ARM Based SoC r8a7745 SYSC Driver Updates for v4.10" from Simon Horman:
* Add support for the r8a7745 SoC to rcar-sysc
* tag 'renesas-r8a7745-sysc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-sysc: add R8A7745 support
ARM: shmobile: r8a7745: add power domain index macros
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We get the following warning with the driver is compiled in:
WARNING: modpost: Found 1 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
With CONFIG_DEBUG_SECTION_MISMATCH enabled, the details are reported:
WARNING: vmlinux.o(.text+0x55d014): Section mismatch in reference from the
function fsl_guts_probe() to the function
.init.text:of_flat_dt_get_machine_name()
The function fsl_guts_probe() references
the function __init of_flat_dt_get_machine_name().
This is often because fsl_guts_probe lacks a __init
annotation or the annotation of of_flat_dt_get_machine_name is wrong.
This patch fixes the issue by using the normal DT/OF API rather than
the of_flat_* one.
Cc: Scott Wood <oss@buserror.net>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The global utilities block controls power management, I/O device
enabling, power-onreset(POR) configuration monitoring, alternate
function selection for multiplexed signals,and clock control.
This patch adds a driver to manage and access global utilities block.
Initially only reading SVR and registering soc device are supported.
Other guts accesses, such as reading RCW, should eventually be moved
into this driver as well.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The hardware descriptors have big endian (BE) format.
Provide proper endianness handling for the remaining
descriptor fields, to ensure they are correctly
accessed by non-BE CPUs too.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Identify the SoC type and revision, and register this information with
the SoC bus, so it is available under /sys/devices/soc0/, and can be
checked where needed using soc_device_match().
Identification is done using the Product Register or Common Chip Code
Register, as declared in DT (PRR only for now), or using a hardcoded
fallback if missing.
Example:
Detected Renesas R-Car Gen2 r8a7791 ES1.0
...
# cat /sys/devices/soc0/{machine,family,soc_id,revision}
Koelsch
R-Car Gen2
r8a7791
ES1.0
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for RZ/G1E (R8A7745) SoC power areas to the R-Car SYSC driver.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
There are multiple occurences of both contextB and context_b
in different h/w descriptors, referring to the same descriptor
field known as "Context B". Stick with the "context_b" naming,
for obvious reasons including consistency (see also context_a).
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Preventively mask every access to the 'fqid' h/w field,
since it is defined as a 24-bit field, for every h/w
descriptor. Add generic accessors for this field to
ensure correct access.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
1. qm_mcc_querywq layout not used for now, so drop it;
2. queryfq, queryfq_np and alterfq are used only for accesses to
the 'fqid' field, so replace these with a generic 'fq' layout.
As a consequence, 'querycgr' turns into 'cgr' following the
same reasoning above and for consistent naming.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Replace dummy platform device hack with a reference to a portal's
platform device, in order to dma map the test frame for this
small unit test. The 2 qman symbols need to be exported because
this self test is a kernel module.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
The qman portals are platform devices themselves, so they should
handle dma mappings. Creating a dummy platform device in order to
support dma mapping operations is not justified (and not portable).
Instead, do the mapping against the first portal that has been
initialised.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
This function must only return the truth value of whether
two frame descriptors are different or not.
It does NOT have to compute some obscure difference between
fd fields and return it as an int, making sparse complain
about type conversions in the process.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use the proper accessor to get the FD address.
Accessing the internal field "addr_lo" directly is not portable
and error prone.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
In case init_pcfg() returns with error the CI region
must be unmapped too.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
qman_query_fq*() may return other error codes apart from
-ERANGE, in which cases the error handling done by the
resource cleanup callers would be wrong. The patch
fixes the handling of those cases, and cleans up related
code inside the resource cleanup & release handlers (i.e.
replace hardcoded fqid value with corresponding define).
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use arch portable of_property_read_u32() instead, which takes
care of endianness conversions.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Trivial fix to spelling mistake "uncommited" to "uncommitted" in
critical error messages.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Scott Wood <oss@buserror.net>
This contains mostly cleanup and new feature work on the power
management controller as well as the addition of a Kconfig symbol for
the new Tegra186 (Parker) SoC generation.
-----BEGIN PGP SIGNATURE-----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=yvrl
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
soc: tegra: Core SoC changes for v4.10-rc1
This contains mostly cleanup and new feature work on the power
management controller as well as the addition of a Kconfig symbol for
the new Tegra186 (Parker) SoC generation.
* tag 'tegra-for-4.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Use consistent naming for PM domains
soc/tegra: pmc: Remove genpd when adding provider fails
soc/tegra: pmc: Check return code for pm_genpd_init()
soc/tegra: pmc: Clean-up I/O rail error messages
soc/tegra: pmc: Simplify IO rail bit handling
soc/tegra: pmc: Guard against uninitialised PMC clock
soc/tegra: pmc: Add I/O pad voltage support
soc/tegra: pmc: Use consistent ordering of bit definitions
soc/tegra: pmc: Correct type of variable for tegra_pmc_readl()
soc/tegra: pmc: Use BIT macro for register field definition
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains the device tree bindings and a driver for the Tegra HSP, a
hardware block that provides hardware synchronization primitives and is
the foundation for inter-processor communication between CPU and BPMP.
-----BEGIN PGP SIGNATURE-----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=Gojp
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.10-mailbox' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
mailbox: Add Tegra HSP driver
This contains the device tree bindings and a driver for the Tegra HSP, a
hardware block that provides hardware synchronization primitives and is
the foundation for inter-processor communication between CPU and BPMP.
* tag 'tegra-for-4.10-mailbox' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
mailbox: Add Tegra HSP driver
dt-bindings: mailbox: Add Tegra HSP binding
soc/tegra: Add Tegra186 support
Signed-off-by: Olof Johansson <olof@lixom.net>
- add support for mt2701 to mtk-scpsys
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJYJdPAAAoJELQ5Ylss8dNDy0YQAKySkifiVd356OcpHn15go+m
EuIYk0vFNISv9qIErkqwUeL52sz9d7JbLXlqxTk2kEhz3Ku1I82OOtvSJMITHfK2
imYunxU8hxZpGlL+qSPNsPz4T3JIz82h5Iq8EoYRroKjzuMycAYVjfJW62y9dr+k
CZNtjJ+W6Qk98od9LFOAXLa+7zikvE6CLm9qlSSkJBLP8pREzenptOZW1KE2aYOc
W0MsRxAx28QholYQ4rT2jx6KG/KYRFO8lgQ4tzM5M1VqvRyKPe9FpGuszLI1Mb9q
+zoC1yu2vC9kR/1QG/iYOy8+YUSytTsIp/YUinVA8Y3SLnKS4pQzLEejUVN+ca6N
jFFEseJGMn3p8HksNRzlFob/4wtYualxeimKWJxOTClZ8jHam+GlJnAG1Up+NgS1
dOp309cVWTsDujOwRcM7fH07lzLwE1Pq4DyWXd2ZKXOvUohBNwjuSBYniUPmptrO
oBjwFKEpA3FpuQXJzbSyUuajIKgg1i0pmwNatkrdm7tO8YZEwdmqh9S9yEKUF0V8
bmAnzjJ+Sd46p4PYZW78thM2GI8EYw6z5M7SjEl9mBHS44xiZFogljtbmlMw3Nvp
3gpvFBp2gg64l46N50FtE/PmHhQjx+vo6/HtATQJJsZO8JFaCBR9IyJEyt69U+OI
xqToVd0DT0DI/sbJK6Zy
=Fe1n
-----END PGP SIGNATURE-----
Merge tag 'v4.9-next-soc' of https://github.com/mbgg/linux-mediatek into next/drivers
- prepare mtk-scpsys to for multi soc support
- add support for mt2701 to mtk-scpsys
* tag 'v4.9-next-soc' of https://github.com/mbgg/linux-mediatek:
soc: mediatek: Add MT2701 scpsys driver
soc: mediatek: Refine scpsys to support multiple platform
Signed-off-by: Olof Johansson <olof@lixom.net>
by firmware on the rk3399, avoiding infite loops when powering on/off a
domain and actually returning an error if power-domain addition fails.
The last part requires usage of the (new in 4.9-rc1) pm_genpd_remove
functionality as well.
-----BEGIN PGP SIGNATURE-----
iQEtBAABCAAXBQJYJzDfEBxoZWlrb0BzbnRlY2guZGUACgkQ86Z5yZzRHYES6Af/
TbUZtN/EWzlvhxMHVlr1ZATeIY9RSMMJWYHWl6Hl6geQSUcoM3vMTQ3ltdPpkgVT
87UUBJgoeHBsRLE/hBPHgWbPSCuZ0CvJnTtIgvq/vUBKaehJAqdoFrNlKXp821WS
12leHafT4afDCAhklpwihsfqO4AuLieFOunQ+5EHqenYGLZ+wtyNDKp0s1w0OkhH
5rRJV3KFl7yrl+2FN4e/2NVrQ+za7RJxUHMsaH9hxdpzYpHcoa8jhrXYHpHmeNIT
u/2bTOaEJZlhspyFv20a5lA+k7PIENPdth6KEsBUCt25Kd/XqRWItZzeA0iK2K3f
l92W43RugjKauZJ9op3GBg==
=4ARq
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers
Changes to the power-domain driver including counter presets now being set
by firmware on the rk3399, avoiding infite loops when powering on/off a
domain and actually returning an error if power-domain addition fails.
The last part requires usage of the (new in 4.9-rc1) pm_genpd_remove
functionality as well.
* tag 'v4.10-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: power-domain: Handle errors from of_genpd_add_provider_onecell
soc: rockchip: power-domain: use pm_genpd_remove in error cleanup
soc: rockchip: power-domain: avoid infinite loop
soc: rockchip: power-domain: Don't (incorrectly) set rk3399 up/down counts
Signed-off-by: Olof Johansson <olof@lixom.net>
The various error messages refer to the PM domains as "power domain",
"genpd" and "PM domain". That's confusing, so convert all error messages
to use the most prominent: "PM domain".
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 3fe577107c ("PM / Domains: Add support for removing PM
domains") add support for removing PM domains. Update the Tegra PMC
driver to remove PM domains if we fail to add a provider for the PM
domain.
Please note that the code under 'power_on_cleanup' label does not
really belong in the clean-up error path for tegra_powergate_add().
To keep the error path simple, remove this label and move the
associated code to where it needs to be invoked.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 7eb231c337 ("PM / Domains: Convert pm_genpd_init() to return
an error code") updated pm_genpd_init() to return an error code. Update
the Tegra PMC driver to check the return value from pm_genpd_init() and
handle any errors returned.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
[treding@nvidia.com: use pr_err() instead of dev_err()]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use pr_err() instead of dev_err() when the pmc->dev field has not been
initialized yet and add a few missing error messages as well as remove
duplicate ones.
Based on work by Jon Hunter <jonathanh@nvidia.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The function tegra_io_rail_prepare() converts the IO rail ID into a
bit position that is used to check the status and control the IO rail
in the PMC registers. However, rather than converting to a bit position
it is more useful to convert to a bit-mask because this is what is
actually used. By doing so the BIT() marco only needs to be used once
and we can use the IO_DPD_REQ_CODE_MASK when checking for erroneous rail
IDs.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
[treding@nvidia.com: rebase and rename bit -> mask]
Signed-off-by: Thierry Reding <treding@nvidia.com>
It is possible for the public functions, tegra_io_rail_power_on/off()
to be called before the PMC device has been probed. If this happens
then the pmc->clk member will not be initialised and the call to
clk_get_rate() in tegra_io_rail_prepare() will return zero and lead
to a divide-by-zero exception. The function clk_get_rate() will return
zero if a NULl clk pointer is passed. Therefore, rather that checking
if pmc->clk is initialised, fix this by checking the return value for
clk_get_rate() to make sure it is not zero.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
I/O pins on Tegra SoCs are grouped into so-called I/O pads. Each such
pad can be used to control the common voltage signal level and power
state of the pins in the given pad.
I/O pads can be powered down even if the system is active, which can
save power from that I/O interface. For SoC generations prior to
Tegra124 the I/O pad voltage is automatically detected and hence the
system software doesn't need to configure it. However, starting with
Tegra210 the detection logic has been removed, so explicit control of
the I/O pad voltage by system software is required.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Bit definitions are sorted in decreasing order by offset. Apply the same
ordering to all definitions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The function tegra_pmc_readl() returns the u32 type data and hence
change the data type of variable where this data is stored to u32
type.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use BIT macro for register field definition and make constant as U
when using in shift operator like (3 << 30) to (3U << 30)
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra186 features a combination of Denver and Cortex-A57 CPU cores
and a GPU based on the Pascal architecture. It contains an ADSP with a
Cortex-A9 CPU used for audio processing, hardware video encoders and
decoders with multi-format support, ISP for image capture processing
and BPMP for power management.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
It was a bit surprising that the device was reported to have probed just
fine, but the provider hadn't been registered.
So handle any errors when registering the provider and fail the probe
accordingly.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The newly introduced pm_genpd_remove reverts the initialization done
by pm_genpd_init and is necessary in the error path of the rockchip
power-domain driver.
Without it the driver will in the error case cleanup the devm-allocated
structures including the elements referenced in the gpd_list thus making
deactivation of unused domains (and probably later genpd accesses as
well) fail by accessing invalid pointers.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a driver for the Renesas R-Car Gen1 RESET/WDT and R-Car Gen2/Gen3
and RZ/G RST module.
For now this driver just provides an API to obtain the state of the mode
pins, as latched at reset time. As this is typically called from the
probe function of a clock driver, which can run much earlier than any
initcall, calling rcar_rst_read_mode_pins() just forces an early
initialization of the driver.
Despite the current simple and almost identical handling for all
supported SoCs, the driver matches against SoC-specific compatible
values, as the features provided by the hardware module differ a lot
across the various SoC families and members.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
In some cases, we have met the infinite loop in
rockchip_pmu_set_idle_request() or rockchip_do_pmu_set_power_domain().
As the crosbug.com/p/57351 reported, the boot hangs right after this
[1.629163] bootconsole [uart8250] disabled
[1.639286] [drm:drm_core_init] Initialized drm 1.1.0 20060810
[1.645926] [drm:drm_get_platform_dev] Initialized vgem 1.0.0 20120112..
[1.654558] iommu: Adding device ff8f0000.vop to group 0
[1.660569] iommu: Adding device ff900000.vop to group 1
<hang>
This patch adds the error message and timeout to avoid infinite loop if
it fails to get the ack.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add scpsys driver for MT2701.
mtk-scpsys now supports MT8173 (arm64) and MT2701 (arm). So it should
be enabled on both arm64 and arm platforms.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Refine scpsys driver common code to support multiple SoC / platform.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add support for RZ/G1M (R8A7743) SoC power areas to the R-Car SYSC driver.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
On rk3288 it was important that powerdown and powerup counts for the
CPU/GPU in the kernel because:
* The power on default was crazy long.
* We couldn't rely on the firmware to set this up because really this
wasn't the firmware's job--the kernel was the only one that really
cared about bringing up / down CPUs and the GPU and doing suspend /
resume (which involves bringing up / down CPUs).
On newer ARM systems (like rk3399) ARM Trusted Firmware is in charge of
bringing up and down the CPUs and it really should be in charge of
setting all these counts right. After all ATF is in charge of suspend /
resume and CPU up / down. Let's get out of the way and let ATF do its
job.
A few other motivations for doing this:
* Depending on another configuration (PMU_24M_EN_CFG) these counts can
be either in 24M or 32k cycles. Thus, though ATF isn't really so
involved in bringing up the GPU, ATF should probably manage the counts
for everything so it can also manage the 24M / 32k choice.
* It turns out that (right now) 24M mode is broken on rk3399 and not
being used. That means that the count the kernel was programming
in (24) was not 1 us (which it seems was intended) but was actually
.75 ms
* On rk3399 there are actually 2 separate registers for setting CPU
up/down time plus 1 register for GPU up/down time. The curent kernel
code actually was putting the register for the "little" cores in the
"CPU" slot and the register for the "big" cores in the "GPU" slot. It
was never initting the GPU counts.
Note: this change assumes that ATF will actually set these values at
boot, as I'm proposing in <http://crosreview.com/372381>.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
[ATF change has landed]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Driver updates for ARM SoCs, including a couple of newly added drivers:
- The Qualcomm external bus interface 2 (EBI2), used in some of their
mobile phone chips for connecting flash memory, LCD displays or
other peripherals
- Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for the
EFUSE based on that firmware interface.
- Perf support for the AppliedMicro X-Gene performance monitor unit
- Reset driver for STMicroelectronics STM32
- Reset driver for SocioNext UniPhier SoCs
Aside from these, there are minor updates to SoC-specific bus,
clocksource, firmware, pinctrl, reset, rtc and pmic drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAV/gaimCrR//JCVInAQJaOQ/6A++YfLVmdF4wxgcu/0ti28lA7SkQIGJV
UAsfCmqMEutbeDvnloVGmTV2K2NS7mzxdxsJGbVB7Oe/zdOFN+T9sf9hAlId01QA
oVkoagpofoxlyKoKJ/l+heuEEZMa0Ekk3XXRTGv/Ovymo7252o4tEdGu9c+gyaMJ
KqgixcrQRzxuWDgPpHUPUez2vY1iRMvvdcb0EmfiHcIgPOEJc6MIxulsqEIrkoMz
WYeGFIeqRJxnrur3QD8WnD+aZD6bV01wkFTkWXGWg4H87QfEESgVBu5A7TL+5sL8
1SlX/b7S5/ZJbrOiOS2IUyvbK7NiA/Q+NunHW2rMVnUWuEvJ9HAQB1kVSQH5LIYO
6OBokjcijm6m/j6O6fdDfvNd6PLsIEUqfWVws7O+uofMMqKPxqak4VBTRdFM+aeF
ZtK7mEbzteCX0bnC+XblZrseAlkIehYnP80CLDbtDTerTWP4gsjxGVt3U6MO0NzB
K0ACWZOclzrcFscNKrmP6uPCpfZriiPV/XMCEHcylA/X2iYsVmpqKzdLuNs5aeUr
uPzQbNWu9ygg/bDRXMYY2E3Kzjsc0eIOKEOPyhLaZdSo4e1FQxud6L2V2Vj0RLB/
iMA7/CyQZqn6Yzgs0VMZm/bnh+hIdHioGFl5K5j6Fcw9VZRkNmnEQJzX4VU5efGO
g1+5av0vFXg=
=GvTq
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Driver updates for ARM SoCs, including a couple of newly added
drivers:
- The Qualcomm external bus interface 2 (EBI2), used in some of their
mobile phone chips for connecting flash memory, LCD displays or
other peripherals
- Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for
the EFUSE based on that firmware interface.
- Perf support for the AppliedMicro X-Gene performance monitor unit
- Reset driver for STMicroelectronics STM32
- Reset driver for SocioNext UniPhier SoCs
Aside from these, there are minor updates to SoC-specific bus,
clocksource, firmware, pinctrl, reset, rtc and pmic drivers"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
bus: qcom-ebi2: depend on HAS_IOMEM
pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181
clk: mvebu: Add clk support for the orion5x SoC mv88f5181
dt-bindings: EXYNOS: Add Exynos5433 PMU compatible
clocksource: exynos_mct: Add the support for ARM64
perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver
Documentation: Add documentation for APM X-Gene SoC PMU DTS binding
MAINTAINERS: Add entry for APM X-Gene SoC PMU driver
bus: qcom: add EBI2 driver
bus: qcom: add EBI2 device tree bindings
rtc: rtc-pm8xxx: Add support for pm8018 rtc
nvmem: amlogic: Add Amlogic Meson EFUSE driver
firmware: Amlogic: Add secure monitor driver
soc: qcom: smd: Reset rx tail rather than tx
memory: atmel-sdramc: fix a possible NULL dereference
reset: hi6220: allow to compile test driver on other architectures
reset: zynq: add driver Kconfig option
reset: sunxi: add driver Kconfig option
reset: stm32: add driver Kconfig option
reset: socfpga: add driver Kconfig option
...
Enable the drivers on the powerpc arch.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Add self tests for the DPAA 1.x Queue Manager driver. The tests
ensure that the driver can properly enqueue and dequeue to/from
frame queues using the QMan portal infrastructure.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Add a self test for the DPAA 1.x Buffer Manager driver. This
test ensures that the driver can properly acquire and release
buffers using the BMan portal infrastructure.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
This driver enables the Freescale DPAA 1.x Queue Manager block.
QMan is a hardware accelerator that manages frame queues. It allows
CPUs and other accelerators connected to the SoC datapath to enqueue
and dequeue ethernet frames, thus providing the infrastructure for
data exchange among CPUs and datapath accelerators.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
This driver enables the Freescale DPAA 1.x Buffer Manager block.
BMan is a hardware accelerator that manages buffer pools. It allows
CPUs and other accelerators connected to the SoC datapath to acquire
and release buffers during data processing.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
of_mm_gpiochip_add_data() calls mm_gc->save_regs() before
setting the data. Therefore ->save_regs() cannot use
gpiochip_get_data()
An Oops is encountered without this fix.
fixes: 1e714e54b5 ("powerpc: qe_lib-gpio: use gpiochip data pointer")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: <stable@vger.kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Scott Wood <oss@buserror.net>
Commit 0e6e01ff69 ("CPM/QE: use genalloc to manage CPM/QE muram")
has changed the way muram is managed.
genalloc uses kmalloc(), hence requires the SLAB to be up and running.
On powerpc 8xx, cpm_reset() is called early during startup.
cpm_reset() then calls cpm_muram_init() before SLAB is available,
hence the following Oops.
cpm_reset() cannot be called during initcalls because the CPM is
needed for console.
This patch removes the call to cpm_muram_init() from cpm_reset().
cpm_muram_init() will be called from a new function called cpm_init()
which is declared as subsys_initcall, unless cpm_muram_alloc() is
called earlier for the serial console in which case cpm_muram_init()
will be called from there.
The reason for calling it from two places is that some drivers
(e.g. i2c-cpm) need some of the initialisations done by
cpm_muram_init() but don't call cpm_muram_alloc(). The console
driver calls cpm_muram_alloc() but some platforms might not use
the CPM serial ports for console.
[ 0.000000] Unable to handle kernel paging request for data at address 0x00000008
[ 0.000000] Faulting instruction address: 0xc01acce0
[ 0.000000] Oops: Kernel access of bad area, sig: 11 [#1]
[ 0.000000] PREEMPT CMPC885
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.14-g0886ed8 #5
[ 0.000000] task: c05183e0 ti: c0536000 task.ti: c0536000
[ 0.000000] NIP: c01acce0 LR: c0011068 CTR: 00000000
[ 0.000000] REGS: c0537e50 TRAP: 0300 Not tainted (4.4.14-s3k-dev-g0886ed8-svn)
[ 0.000000] MSR: 00001032 <ME,IR,DR,RI> CR: 28044428 XER: 00000000
[ 0.000000] DAR: 00000008 DSISR: c0000000
GPR00: c0011068 c0537f00 c05183e0 00000000 00009000 ffffffff 00000bc0 ffffffff
GPR08: ff003000 ff00b000 ff003bbf 00000000 22044422 100d43a8 00000000 07ff94e8
GPR16: 00000000 07bb5d70 00000000 07ff81f4 07ff81f4 07ff81f4 00000000 00000000
GPR24: 07ffb3a0 07fe7628 c0550000 c7ffa190 c0540000 ff003bbf 00000000 00000001
[ 0.000000] NIP [c01acce0] gen_pool_add_virt+0x14/0xdc
[ 0.000000] LR [c0011068] cpm_muram_init+0xd4/0x18c
[ 0.000000] Call Trace:
[ 0.000000] [c0537f00] [00000200] 0x200 (unreliable)
[ 0.000000] [c0537f20] [c0011068] cpm_muram_init+0xd4/0x18c
[ 0.000000] [c0537f70] [c0494684] cpm_reset+0xb4/0xc8
[ 0.000000] [c0537f90] [c0494c64] cmpc885_setup_arch+0x10/0x30
[ 0.000000] [c0537fa0] [c0493cd4] setup_arch+0x130/0x168
[ 0.000000] [c0537fb0] [c04906bc] start_kernel+0x88/0x380
[ 0.000000] [c0537ff0] [c0002224] start_here+0x38/0x98
[ 0.000000] Instruction dump:
[ 0.000000] 91430010 91430014 80010014 83e1000c 7c0803a6 38210010 4e800020 7c0802a6
[ 0.000000] 9421ffe0 bf61000c 90010024 7c7e1b78 <80630008> 7c9c2378 7cc31c30 3863001f
[ 0.000000] ---[ end trace dc8fa200cb88537f ]---
fixes: 0e6e01ff69 ("CPM/QE: use genalloc to manage CPM/QE muram")
Cc: stable@vger.linux.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood: Removed some string changes unrelated to bugfix]
Signed-off-by: Scott Wood <oss@buserror.net>
Use of_property_read_bool to check for the existence of a property.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e1,e2;
statement S2,S1;
@@
- if (of_get_property(e1,e2,NULL))
+ if (of_property_read_bool(e1,e2))
S1 else S2
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
modify get_qe_base function with of_address_to_resource
instead of of_get_property and of_translate_address.
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use the function resource_size instead of explicit computation.
Problem found using Coccinelle.
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Signed-off-by: Scott Wood <oss@buserror.net>
reduces the failure rate on the data transfer between pmic and
pmic wrapper.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=qdYG
-----END PGP SIGNATURE-----
Merge tag 'v4.8-next-soc' of https://github.com/mbgg/linux-mediatek into next/drivers
Pull "ARM: mediatek: soc updates for v4.9" from Matthias Brugger:
extent the waiting time of the pmic wrapper to 10 ms which
reduces the failure rate on the data transfer between pmic and
pmic wrapper.
* tag 'v4.8-next-soc' of https://github.com/mbgg/linux-mediatek:
soc: mediatek: PMIC wrap: Extend the waiting time to 10ms.
This contains a single patch to fix an issue with setting the deep power
down mode of I/O rails.
-----BEGIN PGP SIGNATURE-----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=IFfY
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
Pull "soc/tegra: Changes for v4.9-rc1" from Thierry Reding:
This contains a single patch to fix an issue with setting the deep power
down mode of I/O rails.
* tag 'tegra-for-4.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Fix incorrect DPD request
Update the EXYNOS PM domain code to use the of_genpd_add_subdomain()
and remove any calls to of_genpd_get_from_provider().
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The local end of each SMD channel is responsible for updating the tx
head and the rx tail, as such we should not touch the tx tail during a
reset.
Reported-by: Jeremy McNicoll <jmcnicol@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
By representing each edge as its own device the channels are no longer
tied to being parented by the same smd device and as such an edge can
live as children of e.g. remoteproc instances.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The code exectued by the interrupt handler depends on the values parsed
after requesting the irq, just to be save we should therefor move the
request_irq() call to be done after parsing the properties.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Multi-channel clients split between several drivers need a way to close
individual channels, as these drivers might be removed individually.
With this in place the responsibility of closing additionally opened
channels to the client as well only concerning smd about the primary
channel.
With this approach we will only trigger removal of SMD devices based on
the state of the primary channel, however we get in sync with how rpmsg
works.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
If we fail to get the hwspinlock due to probe defer, we shouldn't
print an error message. Just be silent in this case.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Read data fails sometimes because of a timeout that PMIC cannot transfer data
to PMIC wrap on time, extend the waiting time to 10ms to reduce the failed
rate.
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Register gpd_dev_ops.active_wakeup function to support keep power
during suspend state. And add flag to each power domain to
decide whether keep power during suspend or not.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reading the DPD_REQ & DPD2_REQ registers returns the previous requests.
If we sets the current request bit with the returned value, then other
pads will be turned on or off unexpectedly.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Driver updates for ARM SoCs.
A slew of changes this release cycle. The reset driver tree, that we merge
through arm-soc for historical reasons, is also sizable this time around.
Among the changes:
- clps711x: Treewide changes to compatible strings, merged here for simplicity.
- Qualcomm: SCM firmware driver cleanups, move to platform driver
- ux500: Major cleanups, removal of old mach-specific infrastructure.
- Atmel external bus memory driver
- Move of brcmstb platform to the rest of bcm
- PMC driver updates for tegra, various fixes and improvements
- Samsung platform driver updates to support 64-bit Exynos platforms
- Reset controller cleanups moving to devm_reset_controller_register() APIs
- Reset controller driver for Amlogic Meson
- Reset controller driver for Hisilicon hi6220
- ARM SCPI power domain support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXnm1XAAoJEIwa5zzehBx35lcP/ApuQarIXeZCQZtjlUBV9McW
o3o7FhKFHePmEPeoYCvVeK5D8NykTkQv3WpnCknoxPJzxGJF7jbPWQJcVnXfKOXD
kTcyIK15WL2HHtSE3lYyLfyUPz8AbJyRt0l0cxgcg6jvo+uzlWooNz1y78rLIYzg
UwRssj7OiHv4dsyYRHZIsjnB8gMWw8rYMk154gP2xy6MnNXXzzOVVnOiVqxSZBm+
EgIIcROMOqkkHuFlClMYKluIgrmgz1Ypjf+FuAg7dqXZd+TGRrmGXeI7SkGThfLu
nyvY3N18NViNu7xOUkI9zg7+ifyYM8Si9ylalSICSJdIAxZfiwFqFaLJvVWKU1rY
rBOBjKckQI0/X9WYusFNFHcijhIFV8/FgGAnVRRMPdvlCss7Zp03C9mR4AEhmKMX
rLG49x81hU1C+LftC59ml3iB8dhZrrRkbxNHjLFHVGWNrKMrmJKa8JhXGRAoNM+u
LRauiuJZatqvLfISNvpfcoW2EashVoU3f+uC8ymT3QCyME3wZm0t7T4tllxhMfBl
sOgJqNkTKDmPLofwm/dASiLML7ZF1WePScrFyOACnj9K4mUD+OaCnowtWoQPu0eI
aNmT84oosJ2S9F/iUDPtFHXdzQ+1QPPfSiQ9FXMoauciVq/2F+pqq68yYgqoxFOG
vmkmG2YM4Wyq43u0BONR
=O8+y
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Driver updates for ARM SoCs.
A slew of changes this release cycle. The reset driver tree, that we
merge through arm-soc for historical reasons, is also sizable this
time around.
Among the changes:
- clps711x: Treewide changes to compatible strings, merged here for simplicity.
- Qualcomm: SCM firmware driver cleanups, move to platform driver
- ux500: Major cleanups, removal of old mach-specific infrastructure.
- Atmel external bus memory driver
- Move of brcmstb platform to the rest of bcm
- PMC driver updates for tegra, various fixes and improvements
- Samsung platform driver updates to support 64-bit Exynos platforms
- Reset controller cleanups moving to devm_reset_controller_register() APIs
- Reset controller driver for Amlogic Meson
- Reset controller driver for Hisilicon hi6220
- ARM SCPI power domain support"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
ARM: ux500: consolidate base platform files
ARM: ux500: move soc_id driver to drivers/soc
ARM: ux500: call ux500_setup_id later
ARM: ux500: consolidate soc_device code in id.c
ARM: ux500: remove cpu_is_u* helpers
ARM: ux500: use CLK_OF_DECLARE()
ARM: ux500: move l2x0 init to .init_irq
mfd: db8500 stop passing around platform data
ASoC: ab8500-codec: remove platform data based probe
ARM: ux500: move ab8500_regulator_plat_data into driver
ARM: ux500: remove unused regulator data
soc: raspberrypi-power: add CONFIG_OF dependency
firmware: scpi: add CONFIG_OF dependency
video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
serial: clps711x: Changing the compatibility string to match with the smallest supported chip
irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
clk: clps711x: Changing the compatibility string to match with the smallest supported chip
...
1. Fix size of allocation for Exynos SROM registers (too much was allocated).
2. Constify fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7gEy
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers
Merge "Samsung drivers/soc update for v4.8, part 3" into next/drivers:
1. Fix size of allocation for Exynos SROM registers (too much was allocated).
2. Constify fix.
* tag 'samsung-drivers-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: pmu: Constify arrays with PMU data
memory: samsung: exynos-srom: Fix wrong count of registers
of machine-local files and boardfile-type data for regulators
and ASoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VLJl
-----END PGP SIGNATURE-----
Merge tag 'ux500-cleanup-bundle' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers
Merge "Ux500 cleanups from Arnd" from Linus Walleij:
This is a set of cleanups for the Ux500 that reduce the number
of machine-local files and boardfile-type data for regulators
and ASoC.
* tag 'ux500-cleanup-bundle' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: consolidate base platform files
ARM: ux500: move soc_id driver to drivers/soc
ARM: ux500: call ux500_setup_id later
ARM: ux500: consolidate soc_device code in id.c
ARM: ux500: remove cpu_is_u* helpers
ARM: ux500: use CLK_OF_DECLARE()
ARM: ux500: move l2x0 init to .init_irq
mfd: db8500 stop passing around platform data
ASoC: ab8500-codec: remove platform data based probe
ARM: ux500: move ab8500_regulator_plat_data into driver
ARM: ux500: remove unused regulator data
As the ux500 id code is basically a standalone driver, we can move it
out of the arch code into drivers/soc/ux500.
This is a user-visible change, as it moves all the devices in sysfs
from /sys/devices/soc0/ to /sys/devices/ and leaves the soc0 node as a
separate device.
Originally the idea was to put all on-chip devices under the soc node,
and ux500 was the first platform to have this device, but later platforms
almost all didn't follow that pattern, so this makes the platform do
the same thing as everyone else.
Since the platform is really obsolete now, I am optimistic that nothing
will break after moving the devices around.
As the SoC driver no longer has access to the private header files,
I'm changing the code to instead look up the address of the backupram
from devicetree, which is a good idea anyway.
Finally, having a separate Kconfig symbol means the driver is now
optional and could even be a loadable module rather than always being
built-in if we allowed that for soc_device.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Fixup mising Makefile, fixup BB_UID_BASE to fc0]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We get a harmless warning if the RASPBERRYPI_POWER driver is enabled without
CONFIG_OF during compile testing:
warning: RASPBERRYPI_POWER selects PM_GENERIC_DOMAINS_OF which has unmet direct dependencies (PM_GENERIC_DOMAINS && OF)
There is no need to select PM_GENERIC_DOMAINS_OF if OF is set, so we can
replace the 'select' with a dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Eric Anholt <eric@anholt.net>
Contains fixes and cleanups to the PMC driver, as well as some fixes for
the generic PM domain support and some prep work to support PCIe on 64-
bit ARM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=eFoM
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
soc/tegra: Changes for v4.8-rc1
Contains fixes and cleanups to the PMC driver, as well as some fixes for
the generic PM domain support and some prep work to support PCIe on 64-
bit ARM.
* tag 'tegra-for-4.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: Stub out PCIe IRQ workaround on 64-bit ARM
soc/tegra: pmc: Enable XUSB partitions on boot
soc/tegra: pmc: Initialise power partitions early
soc/tegra: pmc: Add specific error messages
soc/tegra: pmc: Use whitespace more consistently
soc/tegra: pmc: Don't probe PMC if early initialisation fails
soc/tegra: pmc: Add missing of_node_put()
soc/tegra: pmc: Ensure mutex is always initialised
soc/tegra: pmc: Don't populate SoC data until register space is mapped
soc/tegra: pmc: Fix early initialisation of PMC
soc/tegra: pmc: Ensure powergate is available when powering on
soc/tegra: pmc: Initialise resets associated with a power partition
soc/tegra: pmc: Use register definitions instead of magic values
Signed-off-by: Olof Johansson <olof@lixom.net>
