mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-18 09:26:45 +07:00
f747c7e15d
34071 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Paul E. McKenney
|
f747c7e15d |
rcu-tasks: Enclose task-list scan in rcu_read_lock()
The rcu_tasks_trace_postgp() function uses for_each_process_thread()
to scan the task list without the benefit of RCU read-side protection,
which can result in use-after-free errors on task_struct structures.
This error was missed because the TRACE01 rcutorture scenario enables
lockdep, but also builds with CONFIG_PREEMPT_NONE=y. In this situation,
preemption is disabled everywhere, so lockdep thinks everywhere can
be a legitimate RCU reader. This commit therefore adds the needed
rcu_read_lock() and rcu_read_unlock().
Note that this bug can occur only after an RCU Tasks Trace CPU stall
warning, which by default only happens after a grace period has extended
for ten minutes (yes, not a typo, minutes).
Fixes:
|
||
|
Paul E. McKenney
|
592031cc10 |
rcu-tasks: Fix low-probability task_struct leak
When rcu_tasks_trace_postgp() function detects an RCU Tasks Trace
CPU stall, it adds all tasks blocking the current grace period to
a list, invoking get_task_struct() on each to prevent them from
being freed while on the list. It then traverses that list,
printing stall-warning messages for each one that is still blocking
the current grace period and removing it from the list. The list
removal invokes the matching put_task_struct().
This of course means that in the admittedly unlikely event that some
task executes its outermost rcu_read_unlock_trace() in the meantime, it
won't be removed from the list and put_task_struct() won't be executing,
resulting in a task_struct leak. This commit therefore makes the list
removal and put_task_struct() unconditional, stopping the leak.
Note further that this bug can occur only after an RCU Tasks Trace CPU
stall warning, which by default only happens after a grace period has
extended for ten minutes (yes, not a typo, minutes).
Fixes:
|
||
|
Paul E. McKenney
|
ba3a86e472 |
rcu-tasks: Fix grace-period/unlock race in RCU Tasks Trace
The more intense grace-period processing resulting from the 50x RCU
Tasks Trace grace-period speedups exposed the following race condition:
o Task A running on CPU 0 executes rcu_read_lock_trace(),
entering a read-side critical section.
o When Task A eventually invokes rcu_read_unlock_trace()
to exit its read-side critical section, this function
notes that the ->trc_reader_special.s flag is zero and
and therefore invoke wil set ->trc_reader_nesting to zero
using WRITE_ONCE(). But before that happens...
o The RCU Tasks Trace grace-period kthread running on some other
CPU interrogates Task A, but this fails because this task is
currently running. This kthread therefore sends an IPI to CPU 0.
o CPU 0 receives the IPI, and thus invokes trc_read_check_handler().
Because Task A has not yet cleared its ->trc_reader_nesting
counter, this function sees that Task A is still within its
read-side critical section. This function therefore sets the
->trc_reader_nesting.b.need_qs flag, AKA the .need_qs flag.
Except that Task A has already checked the .need_qs flag, which
is part of the ->trc_reader_special.s flag. The .need_qs flag
therefore remains set until Task A's next rcu_read_unlock_trace().
o Task A now invokes synchronize_rcu_tasks_trace(), which cannot
start a new grace period until the current grace period completes.
And thus cannot return until after that time.
But Task A's .need_qs flag is still set, which prevents the current
grace period from completing. And because Task A is blocked, it
will never execute rcu_read_unlock_trace() until its call to
synchronize_rcu_tasks_trace() returns.
We are therefore deadlocked.
This race is improbable, but 80 hours of rcutorture made it happen twice.
The race was possible before the grace-period speedup, but roughly 50x
less probable. Several thousand hours of rcutorture would have been
necessary to have a reasonable chance of making this happen before this
50x speedup.
This commit therefore eliminates this deadlock by setting
->trc_reader_nesting to a large negative number before checking the
.need_qs and zeroing (or decrementing with respect to its initial
value) ->trc_reader_nesting. For its part, the IPI handler's
trc_read_check_handler() function adds a check for negative values,
deferring evaluation of the task in this case. Taken together, these
changes avoid this deadlock scenario.
Fixes:
|
||
|
Paul E. McKenney
|
4fe192dfbe |
rcu-tasks: Shorten per-grace-period sleep for RCU Tasks Trace
The various RCU tasks flavors currently wait 100 milliseconds between each grace period in order to prevent CPU-bound loops and to favor efficiency over latency. However, RCU Tasks Trace needs to have a grace-period latency of roughly 25 milliseconds, which is completely infeasible given the 100-millisecond per-grace-period sleep. This commit therefore reduces this sleep duration to 5 milliseconds (or one jiffy, whichever is longer) in kernels built with CONFIG_TASKS_TRACE_RCU_READ_MB=y. Link: https://lore.kernel.org/bpf/CAADnVQK_AiX+S_L_A4CQWT11XyveppBbQSQgH_qWGyzu_E8Yeg@mail.gmail.com/ Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: <bpf@vger.kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Paul E. McKenney
|
574de8766f |
rcu-tasks: Selectively enable more RCU Tasks Trace IPIs
Many workloads are quite sensitive to IPIs, and such workloads should build kernels with CONFIG_TASKS_TRACE_RCU_READ_MB=y to prevent RCU Tasks Trace from using them under normal conditions. However, other workloads are quite happy to permit more IPIs if doing so makes BPF program updates go faster. This commit therefore sets the default value for the rcupdate.rcu_task_ipi_delay kernel parameter to zero for kernels that have been built with CONFIG_TASKS_TRACE_RCU_READ_MB=n, while retaining the old default of (HZ / 10) for kernels that have indicated an aversion to IPIs via CONFIG_TASKS_TRACE_RCU_READ_MB=y. Link: https://lore.kernel.org/bpf/CAADnVQK_AiX+S_L_A4CQWT11XyveppBbQSQgH_qWGyzu_E8Yeg@mail.gmail.com/ Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: <bpf@vger.kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Paul E. McKenney
|
2393a613d2 |
rcu-tasks: Use more aggressive polling for RCU Tasks Trace
The RCU Tasks Trace grace periods are too slow, as in 40x slower than those of RCU Tasks. This is due to my having assumed a one-second grace period was OK, and thus not having optimized any further. This commit provides the first step in this optimization process, namely by allowing the task_list scan backoff interval to be specified on a per-flavor basis, and then speeding up the scans for RCU Tasks Trace. However, kernels built with CONFIG_TASKS_TRACE_RCU_READ_MB=y continue to use the old slower backoff, consistent with that Kconfig option's goal of reducing IPIs. Link: https://lore.kernel.org/bpf/CAADnVQK_AiX+S_L_A4CQWT11XyveppBbQSQgH_qWGyzu_E8Yeg@mail.gmail.com/ Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: <bpf@vger.kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Paul E. McKenney
|
6731da9e0f |
rcu-tasks: Mark variables static
The n_heavy_reader_attempts, n_heavy_reader_updates, and n_heavy_reader_ofl_updates variables are not used outside of their translation unit, so this commit marks them static. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Paul E. McKenney
|
78edc005f4 |
rcu-tasks: Prevent complaints of unused show_rcu_tasks_classic_gp_kthread()
Commit |
||
|
Linus Torvalds
|
2cc3c4b3c2 |
io_uring-5.9-2020-08-15
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl84aLkQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgps72D/96/HCiUArhxmRltiwqB9KjemEPaY7nWDkz 0hrUtTCr/MjqFIzgPwx6pIjdiSP4GbmcMCrBO67E+mLbOdO1hKte2ElysRAsTlLE fGrcdrs3is5+QK8aqJJks74NzM7XG6jfrR8ewV9cz6aJRWbgRjCWvSxx/03Iha2B t897xuwJg4K30Z83IxPfnu+Xp0dIfmFLUuXQApsZ3bNTuQW3sR4CC/v418+1Wmk4 kXGbQtxcEsrhCy9OxnNyU6GPEJ3b99ANPbRE8OUNQwaHiejvMOCWpcmaoT6TwKeU aku+XcVyoMjxJQk2k0uzr8Ecj5G1FJv4fUHhTZBxcGqkrxhkTjQ520HtrqPlc7uV BjyXutZ8yjmeCbvGrsXu8f8ktjHHkntkRDA8hgzW1OpmWYuWKF/2OIjNpmcmtvbj XqwBDEKdQW9X4dHoQKsVExtzeT6nNP0dxaeZX8OeB2GGkitP7rCm8k/SOuDPTCLi MX/qWpERo4hRfCLjY+4nezxkFMLIF7Jej3tzwuVRshFYsRVQzTPQpbnkmkuwibhi ObEwVI+lLkbatnR2wmJwoVKcywH13U68VNJXACyw1GZnPlp2lYylT/MV80y/iELE mj4zDklqwfIrnoHEuCkERwgXrYsffhUrFvajmAMnJncUFOI4khYJ+dWBVVlBkyn0 e7UK1Sd7Jw== =T+fx -----END PGP SIGNATURE----- Merge tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit |
||
|
Linus Torvalds
|
5bbec3cfe3 |
Cleanup, SECCOMP_FILTER support, message printing fixes, and other
changes to arch/sh. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQEcBAABAgAGBQJfODUiAAoJELcQ+SIFb8Hau0wH/iPeZyv0EhIwL41OPrWhm5wb 26MNWPvPjYIpKVpr0HMXiffILv595ntvrH0Ujnh1+e8J2kRj0eT+T91UkoyGSfav oWmjgcG3NRK6p9882Oo8Xavjr1cTTclOmmDInR4lpAcfIBXkeq2eX0R1h2IuGdNM idGlXhJMkgV+xTlgZy7pYmw5pvFMqL5j7fAUQxm0UoY9kbu8Ac4bOR5WrqtFpkjt xTh9141YvSSfpRx9uMzrQLuUYGzGePhnjUGSUf/b1deYG/33lNtzhHr+QMK6BpXr zdhFalJP40+m+2tG0nCBpAIZcWiOLGb23in5n/trFx3BGZfUf5EKnhZEGUYeE7Q= =XWDn -----END PGP SIGNATURE----- Merge tag 'sh-for-5.9' of git://git.libc.org/linux-sh Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ... |
||
|
Linus Torvalds
|
50f6c7dbd9 |
Misc fixes and small updates all around the place:
- Fix mitigation state sysfs output
- Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support
- Fix Lightning Mountain SoC TSC frequency enumeration bug
- Fix kexec debug output
- Fix kexec memory range assumption bug
- Fix a boundary condition in the crash kernel code
- Optimize porgatory.ro generation a bit
- Enable ACRN guests to use X2APIC mode
- Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fvpv
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes and small updates all around the place:
- Fix mitigation state sysfs output
- Fix an FPU xstate/sxave code assumption bug triggered by
Architectural LBR support
- Fix Lightning Mountain SoC TSC frequency enumeration bug
- Fix kexec debug output
- Fix kexec memory range assumption bug
- Fix a boundary condition in the crash kernel code
- Optimize porgatory.ro generation a bit
- Enable ACRN guests to use X2APIC mode
- Reduce a __text_poke() IRQs-off critical section for the benefit of
PREEMPT_RT"
* tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Acquire pte lock with interrupts enabled
x86/bugs/multihit: Fix mitigation reporting when VMX is not in use
x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs
x86/purgatory: Don't generate debug info for purgatory.ro
x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC
kexec_file: Correctly output debugging information for the PT_LOAD ELF header
kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges
x86/crash: Correct the address boundary of function parameters
x86/acrn: Remove redundant chars from ACRN signature
x86/acrn: Allow ACRN guest to use X2APIC mode
|
||
|
Linus Torvalds
|
1195d58f00 |
Two fixes: fix a new tracepoint's output value, and fix the formatting of show-state syslog printouts.
Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl83xXMRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hwRQ/+LC7yzLFMy+OpvuRp/ZY02VtL7oZdCVAS QFYrvmelsPrfbOzfuevGEg5jCHfJ6sL6Q4O06O/ktMUSsQ1HNc+esbTpbea9L/8X ynpujYXDm2AwiYQS2Bh/jDQVIUqJRfyNVpYWgIWTUq4QULh248vx4LGGYk/LQJtD FmuHT/Hc2xIPc01gAY24npSrPOlTJEm9HsfSpFqinXkNFlyocvRc2VwBnI1q/Dxt NVT18/8gb5dpaB3kRJyjuyNz88wJj7Rh65I/NebW9vvWincQzt7OJOutjnx/BzGG k5hMo/oPwCBRlPZ5X1fbsEjv/vXsXYtByNtNMljP3yFaR42F+pZ+5ySYNTtzyya8 BuicHMlrj+kueEXzfYIxcFaI0u0zZV9OCxNQI7T86j5YJyKj2c5xIvkj20r+4U3N 4biuCawvGNyfbw5X8se9yy1EEsw36UaeKNpoMQKcdpGDVskj2POMcyC06qMqahXX /LcIwKyXDwCKbJOz+NOQNY4ZvJSS3kcCYfTmEcaBs7UR6gFRAlwfrh54SDGLp8au t6MEj5GI51RWjo8S0KFBhqg+1sNqdRw2mvcabeRX1vHb/ter3AcHi2of4bSoAF4E GRKK2gfAkmvGc7cLjHEWvSjUPBS/gQgzNMhnyyFL8fEiL/juY5fCLnamuajWEmnF k6LA71AwkNY= =ffEv -----END PGP SIGNATURE----- Merge tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Two fixes: fix a new tracepoint's output value, and fix the formatting of show-state syslog printouts" * tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix the alignment of the show-state debug output sched: Fix use of count for nr_running tracepoint |
||
|
Linus Torvalds
|
7f5faaaa59 |
Misc fixes, an expansion of perf syscall access to CAP_PERFMON privileged tools,
plus a RAPL HW-enablement for Intel SPR platforms. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl83xBQRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1gb9RAArM0jJemRPHv1a/xLhrRo/cKURrOWpNl0 OQtgppEv9axkavYL34eyoax4LTDCFXxE+NDClSC16abFEVPNriGODNE+CMbFgMbW AyDfP+AsDdNExwl+JWR+J37KIpEIzWLqtjzEjVxZqsuov3C+EaLU4gv947UFohxM QE93d8q3znBSdMjeC/aZyL8iX4aCB0oMjrP7BMXo9a61/oseKLnvE8Zu/ESFDe1S TYZ+VlCxyaZOUBkEyd8+h/CBL8kOvQ2ObBEBxmyQQdGuRZ20BcJRodk3g+mOdnHJ zeohRcXvIHskHTEVeQv+Eh4EitFT3bEFrbk0LwMhKubIhFTKIB42sAzyeC6iUGc/ O5+Qe+bn3kYMynMHNo1yfh0s0S3cU3cfBnC1I2A/NyAn49H0UPr+rjynuKHtCA1+ S36Q9BydZegU/jyhbbDs+h/cdOiKY2F3MPEAZg3u/7EM+NIrmvuQoA7+C33fmLA+ tZzpeDpqNKz65JgYDQ2sZdghyVp41KTogeTm6Xu5O3sLhCnATiyqL2z2LCoWj+yZ KuZ+zHtV8ajRwt1bhq7qFUIyQLsHHUlz5z7TiUC7qqB48LpxO7LiTZ7CxUDY432N Xz8QPD/D71HAWmbkAXUih+JXG0nQSdlF6Xpwquczqc/8odJ46xdQ+i5wIgBOcudP A+kEXRqz5rA= =NsxB -----END PGP SIGNATURE----- Merge tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes, an expansion of perf syscall access to CAP_PERFMON privileged tools, plus a RAPL HW-enablement for Intel SPR platforms" * tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Add support for Intel SPR platform perf/x86/rapl: Support multiple RAPL unit quirks perf/x86/rapl: Fix missing psys sysfs attributes hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration kprobes: Remove show_registers() function prototype perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability |
||
|
Linus Torvalds
|
eb1319af41 |
A documentation fix and a 'fallthrough' macro update.
Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl83wioRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1jBcw/+NyKjKj9wm07DaFl66YjlqWridTfl6sBT tS2lNMNO8PXVIzNj3GgFTJNQPHz5whQ5tQzufOD2gSw5TyK3m7uzlPiI8EOuEQs3 p4KsUr72BN5WUoBw8CH1IRYNGTedqEEjs2D8rEsAzl2yFMPyRwlekmieVu0kg+JK y64a41+4B7Lg1OlUWgOBpqm/3+Tn7AKoOHPCBRW0Rr45fU8IGqLbzXCHd0zkg/7f 8goPbM0dBZd8ILcI2YA9KlLujLk0lVRmLlVRBWdlj5KqP/k6+GrOfJxSUA02fpta X71U7wmcpKJX412ANZmzyJnJdCSirMTvcP4ICp0LgK1vqeNeNg03kF7sXyDwiRBk CefH37Yjwu65ZQpKV67BCtukNy7gyjKuCFetDcwUsKjKMZ5ULEWSN69ciliOQRbz P4j0Wv8g9i2JztsR+LobuPv4eGwjwo0gDioW5giu8qfUeGsCmQC3X1X3PhiceZOV xOtJLUhkqPXjdujjdxf/vYyQtVRHZH8hJdTYd9XM0UeEZzTsAjlyQ/uq/dGMbwLH Wd5v3uS5VOU69Zp5CaaNEby64QaF3lXKA6HtogZNkbqlnZ3WugfNC5C/qNWtmqat 6dSwDOFcd4yzRD3ogA/G9DL9OLAcmj5QN4NeksSIeMy/QsP+u/bBoIRlPhDe6dcl K+pxW0RmbBY= =T2pv -----END PGP SIGNATURE----- Merge tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixlets from Ingo Molnar: "A documentation fix and a 'fallthrough' macro update" * tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Convert to use the preferred 'fallthrough' macro Documentation/locking/locktypes: Fix a typo |
||
|
Linus Torvalds
|
18737f4243 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "Subsystems affected by this patch series: mm/hotfixes, lz4, exec, mailmap, mm/thp, autofs, sysctl, mm/kmemleak, mm/misc and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits) virtio: pci: constify ioreadX() iomem argument (as in generic implementation) ntb: intel: constify ioreadX() iomem argument (as in generic implementation) rtl818x: constify ioreadX() iomem argument (as in generic implementation) iomap: constify ioreadX() iomem argument (as in generic implementation) sh: use generic strncpy() sh: clkfwk: remove r8/r16/r32 include/asm-generic/vmlinux.lds.h: align ro_after_init mm: annotate a data race in page_zonenum() mm/swap.c: annotate data races for lru_rotate_pvecs mm/rmap: annotate a data race at tlb_flush_batched mm/mempool: fix a data race in mempool_free() mm/list_lru: fix a data race in list_lru_count_one mm/memcontrol: fix a data race in scan count mm/page_counter: fix various data races at memsw mm/swapfile: fix and annotate various data races mm/filemap.c: fix a data race in filemap_fault() mm/swap_state: mark various intentional data races mm/page_io: mark various intentional data races mm/frontswap: mark various intentional data races mm/kmemleak: silence KCSAN splats in checksum ... |
||
|
Xiaoming Ni
|
88db0aa242 |
all arch: remove system call sys_sysctl
Since commit
|
||
|
Christoph Hellwig
|
846f9e1fb9 |
dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
Have a single definition that architetures can select. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Rich Felker <dalias@libc.org> |
||
|
Linus Torvalds
|
5848dc5b1b |
dma-debug: remove debug_dma_assert_idle() function
This remoes the code from the COW path to call debug_dma_assert_idle(),
which was added many years ago.
Google shows that it hasn't caught anything in the 6+ years we've had it
apart from a false positive, and Hugh just noticed how it had a very
unfortunate spinlock serialization in the COW path.
He fixed that issue the previous commit (
|
||
|
Hugh Dickins
|
a85ffd59bd |
dma-debug: fix debug_dma_assert_idle(), use rcu_read_lock()
Since commit |
||
|
Linus Torvalds
|
b923f1247b |
A set oftimekeeping/VDSO updates:
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the counter
read function when time namespace support is enabled. Adding the pointer
is a NOOP for all other architectures because the compiler is supposed
to optimize that out when it is unused in the architecture specific
inline. The change also solved a similar problem for MIPS which
fortunately has time namespaces not yet enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another sequence
counter in the S390 implementation. A better solution is to utilize the
already existing VDSO sequence count for this. The core code now exposes
helper functions which allow to serialize against the timekeeper code
and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It now has
an embedded architecture specific struct embedded which defaults to an
empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support to
work from a common upstream base.
- A trivial comment fix.
-----BEGIN PGP SIGNATURE-----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=y8Z5
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping updates from Thomas Gleixner:
"A set of timekeeping/VDSO updates:
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the
counter read function when time namespace support is enabled.
Adding the pointer is a NOOP for all other architectures because
the compiler is supposed to optimize that out when it is unused in
the architecture specific inline. The change also solved a similar
problem for MIPS which fortunately has time namespaces not yet
enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another
sequence counter in the S390 implementation. A better solution is
to utilize the already existing VDSO sequence count for this. The
core code now exposes helper functions which allow to serialize
against the timekeeper code and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It
now has an embedded architecture specific struct embedded which
defaults to an empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support
to work from a common upstream base.
- A trivial comment fix"
* tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Delete repeated words in comments
lib/vdso: Allow to add architecture-specific vdso data
timekeeping/vsyscall: Provide vdso_update_begin/end()
vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()
|
||
|
Linus Torvalds
|
b6b178e38f |
A set of posix CPU timer changes which allows to defer the heavy work of
posix CPU timers into task work context. The tick interrupt is reduced to a quick check which queues the work which is doing the heavy lifting before returning to user space or going back to guest mode. Moving this out is deferring the signal delivery slightly but posix CPU timers are inaccurate by nature as they depend on the tick so there is no real damage. The relevant test cases all passed. This lifts the last offender for RT out of the hard interrupt context tick handler, but it also has the general benefit that the actual heavy work is accounted to the task/process and not to the tick interrupt itself. Further optimizations are possible to break long sighand lock hold and interrupt disabled (on !RT kernels) times when a massive amount of posix CPU timers (which are unpriviledged) is armed for a task/process. This is currently only enabled for x86 because the architecture has to ensure that task work is handled in KVM before entering a guest, which was just established for x86 with the new common entry/exit code which got merged post 5.8 and is not the case for other KVM architectures. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl82sRkTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoUs2D/9IZuALnVXtnvsOQh5uMRpxr/I6tpQm KJSRkcSSne9rIV3dQlswDdaT7bGibd7pbKQOnlA0vc37vDwaJHEzmTOJGpHpHnMA fHH2QP3LL2oZ1d7DG6eNJESCmaFBcaYXNbKtluOWQzHQhd9P8yHb4N+kzfxHK0Fr uNd+cd6T658xPsNOLaLP3MG2Yz0rVt2F5c1v8n78NfibeKckYhPov8cwVrf2WGWr XFHKorx4lXZ+vFwKEeZ7qQtqvAsLDixgMkFfY2GGSPhd1AMAaIUICZgsdEj2gg7H YK+lwA0uoqPaXshOCmdkCLkfPA7BRmAySWE7jUPbIvRqM94Uapk9+4CqjgiH1Qs+ T8CWbcZk8tZACFrouhZkhrnjUTev/vE7oirsjn26DRY68/Ec7llpCOjvVA7HZWqN vJ/BN35IufA7WEkf2TWNv5mg1zIlHI0O17zDifFq4g2VKFDVvQB0QYWlvug/eAu9 zYNX3WwA/IP8C9EOHZt54e6AKH8F3dT04oLFUkmRIcVKv1SEbdFufVfV7RavPEwK P21JNXPDdd0aLUO7ksqyQN7pyR3puGXSCb5NAPtZY6UWSMN4G/3SVry3mJa/0BJd mn+uYGpo9vmceh90vAHBoGIena/pez/PyRLWgGeT9jMjk95rNY0sEhaLEAOF9AR5 ck+3K2rY0S3wwQ== =Reot -----END PGP SIGNATURE----- Merge tag 'timers-core-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more timer updates from Thomas Gleixner: "A set of posix CPU timer changes which allows to defer the heavy work of posix CPU timers into task work context. The tick interrupt is reduced to a quick check which queues the work which is doing the heavy lifting before returning to user space or going back to guest mode. Moving this out is deferring the signal delivery slightly but posix CPU timers are inaccurate by nature as they depend on the tick so there is no real damage. The relevant test cases all passed. This lifts the last offender for RT out of the hard interrupt context tick handler, but it also has the general benefit that the actual heavy work is accounted to the task/process and not to the tick interrupt itself. Further optimizations are possible to break long sighand lock hold and interrupt disabled (on !RT kernels) times when a massive amount of posix CPU timers (which are unpriviledged) is armed for a task/process. This is currently only enabled for x86 because the architecture has to ensure that task work is handled in KVM before entering a guest, which was just established for x86 with the new common entry/exit code which got merged post 5.8 and is not the case for other KVM architectures" * tag 'timers-core-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Select POSIX_CPU_TIMERS_TASK_WORK posix-cpu-timers: Provide mechanisms to defer timer handling to task_work posix-cpu-timers: Split run_posix_cpu_timers() |
||
|
Linus Torvalds
|
1d229a65b4 |
Two fixes in the core interrupt code which ensure that all error exits
unlock the descriptor lock. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl82rV8THHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoThVD/4qyaXGvSg02j08IMArce2arTsBaCNN tD+2iCmm8Ku74p3EZRjji9FyN7M/MKcTVkrcRFM+4YKTFnbgMYpnydOxbtsKren/ vimjtGWyfVjh7mzBt4lB53d/10NAmJRYQl1gJiYaEgmTdvhZ/gLygL1pHwc9eBHr hrn2WvAZ1aS9dMNuN8MnszObJphvh4z42fLYenHDxQqiAnEKTrhGvhfRuNowjjyP GHoUhXxMvVxN0DOE21EPGV6ezgssicucyymQmKEDW97tcLEvkVJuUuTfAiXuEPvg T94FIg1RU01AuwQPBmuoFX7RumYNf/XRhoQu1p9wNU7pFJh3eY4yHp8jXx24U2tm OY66wJfsuQ3BLPaxB9RuyV4Bs8QWinTzM+VZiTwkBPx5/zhtp5LU/uKq8+NcMv3Z 72f1tJeXi8FwlB1ALRjNdKth4hkB/mL9aHPMXQqSRTb5LcWSXbZ+MBnUxzPnjlSy u4EK7V2m8GHX2lQ/RA+QC3u3Vv1lY/dmjdyIXLLFv7IkweJXW1yj6hotIBNVyHXt nG/0ccKlU7KvmI5pnzqrclSwRaKOsrwRPfsujHgAo3Dc+FTxSDXz2lUQK+Oqla9n cd6yKOvwjOk2SeETlM5l3Tr8X1b30AgaE2IjtSqt3xNWReWXrA0tBHrDWyMBBOBI +Vd9rsaGq1hfbQ== =/wh/ -----END PGP SIGNATURE----- Merge tag 'irq-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Two fixes in the core interrupt code which ensure that all error exits unlock the descriptor lock" * tag 'irq-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Unlock irq descriptor after errors genirq/PM: Always unlock IRQ descriptor in rearm_wake_irq() |
||
|
Linus Torvalds
|
0fd9cc6b0c |
Modules updates for v5.9
Summary of modules changes for the 5.9 merge window:
- Have modules that use symbols from proprietary modules inherit the
TAINT_PROPRIETARY_MODULE taint, in an effort to prevent GPL shim modules that
are used to circumvent _GPL exports. These are modules that claim to be GPL
licensed while also using symbols from proprietary modules. Such modules will
be rejected while non-GPL modules will inherit the proprietary taint.
- Module export space cleanup. Unexport symbols that are unused outside of
module.c or otherwise used in only built-in code.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Qlem
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"The most important change would be Christoph Hellwig's patch
implementing proprietary taint inheritance, in an effort to discourage
the creation of GPL "shim" modules that interface between GPL symbols
and proprietary symbols.
Summary:
- Have modules that use symbols from proprietary modules inherit the
TAINT_PROPRIETARY_MODULE taint, in an effort to prevent GPL shim
modules that are used to circumvent _GPL exports. These are modules
that claim to be GPL licensed while also using symbols from
proprietary modules. Such modules will be rejected while non-GPL
modules will inherit the proprietary taint.
- Module export space cleanup. Unexport symbols that are unused
outside of module.c or otherwise used in only built-in code"
* tag 'modules-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
modules: inherit TAINT_PROPRIETARY_MODULE
modules: return licensing information from find_symbol
modules: rename the licence field in struct symsearch to license
modules: unexport __module_address
modules: unexport __module_text_address
modules: mark each_symbol_section static
modules: mark find_symbol static
modules: mark ref_module static
modules: linux/moduleparam.h: drop duplicated word in a comment
|
||
|
Libing Zhou
|
cc172ff301 |
sched/debug: Fix the alignment of the show-state debug output
Current sysrq(t) output task fields name are not aligned with actual task fields value, e.g.: kernel: sysrq: Show State kernel: task PC stack pid father kernel: systemd S12456 1 0 0x00000000 kernel: Call Trace: kernel: ? __schedule+0x240/0x740 To make it more readable, print fields name together with task fields value in the same line, with fixed width: kernel: sysrq: Show State kernel: task:systemd state:S stack:12920 pid: 1 ppid: 0 flags:0x00000000 kernel: Call Trace: kernel: __schedule+0x282/0x620 Signed-off-by: Libing Zhou <libing.zhou@nokia-sbell.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200814030236.37835-1-libing.zhou@nokia-sbell.com |
||
|
Linus Torvalds
|
a1d21081a6 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
"Some merge window fallout, some longer term fixes:
1) Handle headroom properly in lapbether and x25_asy drivers, from
Xie He.
2) Fetch MAC address from correct r8152 device node, from Thierry
Reding.
3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg,
from Rouven Czerwinski.
4) Correct fdputs in socket layer, from Miaohe Lin.
5) Revert troublesome sockptr_t optimization, from Christoph Hellwig.
6) Fix TCP TFO key reading on big endian, from Jason Baron.
7) Missing CAP_NET_RAW check in nfc, from Qingyu Li.
8) Fix inet fastreuse optimization with tproxy sockets, from Tim
Froidcoeur.
9) Fix 64-bit divide in new SFC driver, from Edward Cree.
10) Add a tracepoint for prandom_u32 so that we can more easily
perform usage analysis. From Eric Dumazet.
11) Fix rwlock imbalance in AF_PACKET, from John Ogness"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
net: openvswitch: introduce common code for flushing flows
af_packet: TPACKET_V3: fix fill status rwlock imbalance
random32: add a tracepoint for prandom_u32()
Revert "ipv4: tunnel: fix compilation on ARCH=um"
net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus
net: ethernet: stmmac: Disable hardware multicast filter
net: stmmac: dwmac1000: provide multicast filter fallback
ipv4: tunnel: fix compilation on ARCH=um
vsock: fix potential null pointer dereference in vsock_poll()
sfc: fix ef100 design-param checking
net: initialize fastreuse on inet_inherit_port
net: refactor bind_bucket fastreuse into helper
net: phy: marvell10g: fix null pointer dereference
net: Fix potential memory leak in proto_register()
net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init
ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc()
net/nfc/rawsock.c: add CAP_NET_RAW check.
hinic: fix strncpy output truncated compile warnings
drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check
net/tls: Fix kmap usage
...
|
||
|
Miaohe Lin
|
405fa8ac89 |
futex: Convert to use the preferred 'fallthrough' macro
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200813122117.51173-1-linmiaohe@huawei.com |
||
|
Jens Axboe
|
ebf0d100df |
task_work: only grab task signal lock when needed
If JOBCTL_TASK_WORK is already set on the targeted task, then we need
not go through {lock,unlock}_task_sighand() to set it again and queue
a signal wakeup. This is safe as we're checking it _after_ adding the
new task_work with cmpxchg().
The ordering is as follows:
task_work_add() get_signal()
--------------------------------------------------------------
STORE(task->task_works, new_work); STORE(task->jobctl);
mb(); mb();
LOAD(task->jobctl); LOAD(task->task_works);
This speeds up TWA_SIGNAL handling quite a bit, which is important now
that io_uring is relying on it for all task_work deliveries.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jann Horn <jannh@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
||
|
Guenter Roeck
|
f107cee94b |
genirq: Unlock irq descriptor after errors
In irq_set_irqchip_state(), the irq descriptor is not unlocked after an
error is encountered. While that should never happen in practice, a buggy
driver may trigger it. This would result in a lockup, so fix it.
Fixes:
|
||
|
Linus Torvalds
|
9ad57f6dfc |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: - most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction, mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util, memory-hotplug, cleanups, uaccess, migration, gup, pagemap), - various other subsystems (alpha, misc, sparse, bitmap, lib, bitops, checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump, exec, kdump, rapidio, panic, kcov, kgdb, ipc). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits) mm/gup: remove task_struct pointer for all gup code mm: clean up the last pieces of page fault accountings mm/xtensa: use general page fault accounting mm/x86: use general page fault accounting mm/sparc64: use general page fault accounting mm/sparc32: use general page fault accounting mm/sh: use general page fault accounting mm/s390: use general page fault accounting mm/riscv: use general page fault accounting mm/powerpc: use general page fault accounting mm/parisc: use general page fault accounting mm/openrisc: use general page fault accounting mm/nios2: use general page fault accounting mm/nds32: use general page fault accounting mm/mips: use general page fault accounting mm/microblaze: use general page fault accounting mm/m68k: use general page fault accounting mm/ia64: use general page fault accounting mm/hexagon: use general page fault accounting mm/csky: use general page fault accounting ... |
||
|
Peter Xu
|
64019a2e46 |
mm/gup: remove task_struct pointer for all gup code
After the cleanup of page fault accounting, gup does not need to pass task_struct around any more. Remove that parameter in the whole gup stack. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wei Yongjun
|
fed79d057d |
kcov: make some symbols static
Fix sparse build warnings: kernel/kcov.c:99:1: warning: symbol '__pcpu_scope_kcov_percpu_data' was not declared. Should it be static? kernel/kcov.c:778:6: warning: symbol 'kcov_remote_softirq_start' was not declared. Should it be static? kernel/kcov.c:795:6: warning: symbol 'kcov_remote_softirq_stop' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Link: http://lkml.kernel.org/r/20200702115501.73077-1-weiyongjun1@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Marco Elver
|
31a1b9878c |
kcov: unconditionally add -fno-stack-protector to compiler options
Unconditionally add -fno-stack-protector to KCOV's compiler options, as all supported compilers support the option. This saves a compiler invocation to determine if the option is supported. Because Clang does not support -fno-conserve-stack, and -fno-stack-protector was wrapped in the same cc-option, we were missing -fno-stack-protector with Clang. Unconditionally adding this option fixes this for Clang. Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Link: http://lkml.kernel.org/r/20200615184302.7591-1-elver@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yue Hu
|
63037f7472 |
panic: make print_oops_end_marker() static
Since print_oops_end_marker() is not used externally, also remove it in kernel.h at the same time. Signed-off-by: Yue Hu <huyue2@yulong.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/20200724011516.12756-1-zbestahu@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Tiezhu Yang
|
79076e1241 |
kernel/panic.c: make oops_may_print() return bool
The return value of oops_may_print() is true or false, so change its type to reflect that. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Xuefeng Li <lixuefeng@loongson.cn> Link: http://lkml.kernel.org/r/1591103358-32087-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vijay Balakrishna
|
0935288c6e |
kdump: append kernel build-id string to VMCOREINFO
Make kernel GNU build-id available in VMCOREINFO. Having build-id in VMCOREINFO facilitates presenting appropriate kernel namelist image with debug information file to kernel crash dump analysis tools. Currently VMCOREINFO lacks uniquely identifiable key for crash analysis automation. Regarding if this patch is necessary or matching of linux_banner and OSRELEASE in VMCOREINFO employed by crash(8) meets the need -- IMO, build-id approach more foolproof, in most instances it is a cryptographic hash generated using internal code/ELF bits unlike kernel version string upon which linux_banner is based that is external to the code. I feel each is intended for a different purpose. Also OSRELEASE is not suitable when two different kernel builds from same version with different features enabled. Currently for most linux (and non-linux) systems build-id can be extracted using standard methods for file types such as user mode crash dumps, shared libraries, loadable kernel modules etc., This is an exception for linux kernel dump. Having build-id in VMCOREINFO brings some uniformity for automation tools. Tyler said: : I think this is a nice improvement over today's linux_banner approach for : correlating vmlinux to a kernel dump. : : The elf notes parsing in this patch lines up with what is described in in : the "Notes (Nhdr)" section of the elf(5) man page. : : BUILD_ID_MAX is sufficient to hold a sha1 build-id, which is the default : build-id type today in GNU ld(2). It is also sufficient to hold the : "fast" build-id, which is the default build-id type today in LLVM lld(2). Signed-off-by: Vijay Balakrishna <vijayb@linux.microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Link: http://lkml.kernel.org/r/1591849672-34104-1-git-send-email-vijayb@linux.microsoft.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Tiezhu Yang
|
6f9e148c21 |
kmod: remove redundant "be an" in the comment
There exists redundant "be an" in the comment, remove it. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: James Morris <jmorris@namei.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kees Cook <keescook@chromium.org> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergei Trofimovich <slyfox@gentoo.org> Cc: Sergey Kvachonok <ravenexp@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tony Vroon <chainsaw@gentoo.org> Cc: Christoph Hellwig <hch@infradead.org> Link: http://lkml.kernel.org/r/20200610154923.27510-3-mcgrof@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Christoph Hellwig
|
8043fc147a |
kernel: add a kernel_wait helper
Add a helper that waits for a pid and stores the status in the passed in kernel pointer. Use it to fix the usage of kernel_wait4 in call_usermodehelper_exec_sync that only happens to work due to the implicit set_fs(KERNEL_DS) for kernel threads. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Link: http://lkml.kernel.org/r/20200721130449.5008-1-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Christoph Hellwig
|
fe81417596 |
exec: use force_uaccess_begin during exec and exit
Both exec and exit want to ensure that the uaccess routines actually do access user pointers. Use the newly added force_uaccess_begin helper instead of an open coded set_fs for that to prepare for kernel builds where set_fs() does not exist. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/20200710135706.537715-7-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Christoph Hellwig
|
3d13f313ce |
uaccess: add force_uaccess_{begin,end} helpers
Add helpers to wrap the get_fs/set_fs magic for undoing any damange done by set_fs(KERNEL_DS). There is no real functional benefit, but this documents the intent of these calls better, and will allow stubbing the functions out easily for kernels builds that do not allow address space overrides in the future. [hch@lst.de: drop two incorrect hunks, fix a commit log typo] Link: http://lkml.kernel.org/r/20200714105505.935079-6-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Greentime Hu <green.hu@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Link: http://lkml.kernel.org/r/20200710135706.537715-6-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Nitin Gupta
|
d34c0a7599 |
mm: use unsigned types for fragmentation score
Proactive compaction uses per-node/zone "fragmentation score" which is always in range [0, 100], so use unsigned type of these scores as well as for related constants. Signed-off-by: Nitin Gupta <nigupta@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Link: http://lkml.kernel.org/r/20200618010319.13159-1-nigupta@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Nitin Gupta
|
facdaa917c |
mm: proactive compaction
For some applications, we need to allocate almost all memory as hugepages.
However, on a running system, higher-order allocations can fail if the
memory is fragmented. Linux kernel currently does on-demand compaction as
we request more hugepages, but this style of compaction incurs very high
latency. Experiments with one-time full memory compaction (followed by
hugepage allocations) show that kernel is able to restore a highly
fragmented memory state to a fairly compacted memory state within <1 sec
for a 32G system. Such data suggests that a more proactive compaction can
help us allocate a large fraction of memory as hugepages keeping
allocation latencies low.
For a more proactive compaction, the approach taken here is to define a
new sysctl called 'vm.compaction_proactiveness' which dictates bounds for
external fragmentation which kcompactd tries to maintain.
The tunable takes a value in range [0, 100], with a default of 20.
Note that a previous version of this patch [1] was found to introduce too
many tunables (per-order extfrag{low, high}), but this one reduces them to
just one sysctl. Also, the new tunable is an opaque value instead of
asking for specific bounds of "external fragmentation", which would have
been difficult to estimate. The internal interpretation of this opaque
value allows for future fine-tuning.
Currently, we use a simple translation from this tunable to [low, high]
"fragmentation score" thresholds (low=100-proactiveness, high=low+10%).
The score for a node is defined as weighted mean of per-zone external
fragmentation. A zone's present_pages determines its weight.
To periodically check per-node score, we reuse per-node kcompactd threads,
which are woken up every 500 milliseconds to check the same. If a node's
score exceeds its high threshold (as derived from user-provided
proactiveness value), proactive compaction is started until its score
reaches its low threshold value. By default, proactiveness is set to 20,
which implies threshold values of low=80 and high=90.
This patch is largely based on ideas from Michal Hocko [2]. See also the
LWN article [3].
Performance data
================
System: x64_64, 1T RAM, 80 CPU threads.
Kernel: 5.6.0-rc3 + this patch
echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/enabled
echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/defrag
Before starting the driver, the system was fragmented from a userspace
program that allocates all memory and then for each 2M aligned section,
frees 3/4 of base pages using munmap. The workload is mainly anonymous
userspace pages, which are easy to move around. I intentionally avoided
unmovable pages in this test to see how much latency we incur when
hugepage allocations hit direct compaction.
1. Kernel hugepage allocation latencies
With the system in such a fragmented state, a kernel driver then allocates
as many hugepages as possible and measures allocation latency:
(all latency values are in microseconds)
- With vanilla 5.6.0-rc3
percentile latency
–––––––––– –––––––
5 7894
10 9496
25 12561
30 15295
40 18244
50 21229
60 27556
75 30147
80 31047
90 32859
95 33799
Total 2M hugepages allocated = 383859 (749G worth of hugepages out of 762G
total free => 98% of free memory could be allocated as hugepages)
- With 5.6.0-rc3 + this patch, with proactiveness=20
sysctl -w vm.compaction_proactiveness=20
percentile latency
–––––––––– –––––––
5 2
10 2
25 3
30 3
40 3
50 4
60 4
75 4
80 4
90 5
95 429
Total 2M hugepages allocated = 384105 (750G worth of hugepages out of 762G
total free => 98% of free memory could be allocated as hugepages)
2. JAVA heap allocation
In this test, we first fragment memory using the same method as for (1).
Then, we start a Java process with a heap size set to 700G and request the
heap to be allocated with THP hugepages. We also set THP to madvise to
allow hugepage backing of this heap.
/usr/bin/time
java -Xms700G -Xmx700G -XX:+UseTransparentHugePages -XX:+AlwaysPreTouch
The above command allocates 700G of Java heap using hugepages.
- With vanilla 5.6.0-rc3
17.39user 1666.48system 27:37.89elapsed
- With 5.6.0-rc3 + this patch, with proactiveness=20
8.35user 194.58system 3:19.62elapsed
Elapsed time remains around 3:15, as proactiveness is further increased.
Note that proactive compaction happens throughout the runtime of these
workloads. The situation of one-time compaction, sufficient to supply
hugepages for following allocation stream, can probably happen for more
extreme proactiveness values, like 80 or 90.
In the above Java workload, proactiveness is set to 20. The test starts
with a node's score of 80 or higher, depending on the delay between the
fragmentation step and starting the benchmark, which gives more-or-less
time for the initial round of compaction. As t he benchmark consumes
hugepages, node's score quickly rises above the high threshold (90) and
proactive compaction starts again, which brings down the score to the low
threshold level (80). Repeat.
bpftrace also confirms proactive compaction running 20+ times during the
runtime of this Java benchmark. kcompactd threads consume 100% of one of
the CPUs while it tries to bring a node's score within thresholds.
Backoff behavior
================
Above workloads produce a memory state which is easy to compact. However,
if memory is filled with unmovable pages, proactive compaction should
essentially back off. To test this aspect:
- Created a kernel driver that allocates almost all memory as hugepages
followed by freeing first 3/4 of each hugepage.
- Set proactiveness=40
- Note that proactive_compact_node() is deferred maximum number of times
with HPAGE_FRAG_CHECK_INTERVAL_MSEC of wait between each check
(=> ~30 seconds between retries).
[1] https://patchwork.kernel.org/patch/11098289/
[2] https://lore.kernel.org/linux-mm/20161230131412.GI13301@dhcp22.suse.cz/
[3] https://lwn.net/Articles/817905/
Signed-off-by: Nitin Gupta <nigupta@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Nitin Gupta <ngupta@nitingupta.dev>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Link: http://lkml.kernel.org/r/20200616204527.19185-1-nigupta@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Joonsoo Kim
|
b518154e59 |
mm/vmscan: protect the workingset on anonymous LRU
In current implementation, newly created or swap-in anonymous page is started on active list. Growing active list results in rebalancing active/inactive list so old pages on active list are demoted to inactive list. Hence, the page on active list isn't protected at all. Following is an example of this situation. Assume that 50 hot pages on active list. Numbers denote the number of pages on active/inactive list (active | inactive). 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(uo) | 50(h) 3. workload: another 50 newly created (used-once) pages 50(uo) | 50(uo), swap-out 50(h) This patch tries to fix this issue. Like as file LRU, newly created or swap-in anonymous pages will be inserted to the inactive list. They are promoted to active list if enough reference happens. This simple modification changes the above example as following. 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(h) | 50(uo) 3. workload: another 50 newly created (used-once) pages 50(h) | 50(uo), swap-out 50(uo) As you can see, hot pages on active list would be protected. Note that, this implementation has a drawback that the page cannot be promoted and will be swapped-out if re-access interval is greater than the size of inactive list but less than the size of total(active+inactive). To solve this potential issue, following patch will apply workingset detection similar to the one that's already applied to file LRU. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Link: http://lkml.kernel.org/r/1595490560-15117-3-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Guenter Roeck
|
e27b1636e9 |
genirq/PM: Always unlock IRQ descriptor in rearm_wake_irq()
rearm_wake_irq() does not unlock the irq descriptor if the interrupt
is not suspended or if wakeup is not enabled on it.
Restucture the exit conditions so the unlock is always ensured.
Fixes:
|
||
|
Linus Torvalds
|
4bf5e36118 |
libnvdimm for 5.9
- Add 'Runtime Firmware Activation' support for NVDIMMs that advertise
the relevant capability
- Misc libnvdimm and DAX cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQT9vPEBxh63bwxRYEEPzq5USduLdgUCXzHodgAKCRAPzq5USduL
djTjAQD1THDmizHn16zd94ueygh/BXfN0zyeVvQH352ol7kdfQEAj2A7YJ9XBbBY
JC6/CNd+OiB9W88lLOUf3Waj1a7cUQ8=
=Q6qn
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updayes from Vishal Verma:
"You'd normally receive this pull request from Dan Williams, but he's
busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm
this cycle.
This adds a new feature in libnvdimm - 'Runtime Firmware Activation',
and a few small cleanups and fixes in libnvdimm and DAX. I'd
originally intended to make separate topic-based pull requests - one
for libnvdimm, and one for DAX, but some of the DAX material fell out
since it wasn't quite ready.
Summary:
- add 'Runtime Firmware Activation' support for NVDIMMs that
advertise the relevant capability
- misc libnvdimm and DAX cleanups"
* tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr
libnvdimm/security: the 'security' attr never show 'overwrite' state
libnvdimm/security: fix a typo
ACPI: NFIT: Fix ARS zero-sized allocation
dax: Fix incorrect argument passed to xas_set_err()
ACPI: NFIT: Add runtime firmware activate support
PM, libnvdimm: Add runtime firmware activation support
libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO()
drivers/dax: Expand lock scope to cover the use of addresses
fs/dax: Remove unused size parameter
dax: print error message by pr_info() in __generic_fsdax_supported()
driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW}
tools/testing/nvdimm: Emulate firmware activation commands
tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation
tools/testing/nvdimm: Add command debug messages
tools/testing/nvdimm: Cleanup dimm index passing
ACPI: NFIT: Define runtime firmware activation commands
ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor
libnvdimm: Validate command family indices
|
||
|
Linus Torvalds
|
97d052ea3f |
A set of locking fixes and updates:
- Untangle the header spaghetti which causes build failures in various
situations caused by the lockdep additions to seqcount to validate that
the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict per
CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot
validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored and
write_seqcount_begin() has a lockdep assertion to validate that the
lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API is
unchanged and determines the type at compile time with the help of
_Generic which is possible now that the minimal GCC version has been
moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs which
have been addressed already independent of this.
While generaly useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if the
writers are serialized by an associated lock, which leads to the well
known reader preempts writer livelock. RT prevents this by storing the
associated lock pointer independent of lockdep in the seqcount and
changing the reader side to block on the lock when a reader detects
that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and initializers.
-----BEGIN PGP SIGNATURE-----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=7Gj+
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
"A set of locking fixes and updates:
- Untangle the header spaghetti which causes build failures in
various situations caused by the lockdep additions to seqcount to
validate that the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict
per CPU seqcounts. As the lock is not part of the seqcount, lockdep
cannot validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored
and write_seqcount_begin() has a lockdep assertion to validate that
the lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API
is unchanged and determines the type at compile time with the help
of _Generic which is possible now that the minimal GCC version has
been moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs
which have been addressed already independent of this.
While generally useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if
the writers are serialized by an associated lock, which leads to
the well known reader preempts writer livelock. RT prevents this by
storing the associated lock pointer independent of lockdep in the
seqcount and changing the reader side to block on the lock when a
reader detects that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and
initializers"
* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/seqlock, headers: Untangle the spaghetti monster
locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
x86/headers: Remove APIC headers from <asm/smp.h>
seqcount: More consistent seqprop names
seqcount: Compress SEQCNT_LOCKNAME_ZERO()
seqlock: Fold seqcount_LOCKNAME_init() definition
seqlock: Fold seqcount_LOCKNAME_t definition
seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
hrtimer: Use sequence counter with associated raw spinlock
kvm/eventfd: Use sequence counter with associated spinlock
userfaultfd: Use sequence counter with associated spinlock
NFSv4: Use sequence counter with associated spinlock
iocost: Use sequence counter with associated spinlock
raid5: Use sequence counter with associated spinlock
vfs: Use sequence counter with associated spinlock
timekeeping: Use sequence counter with associated raw spinlock
xfrm: policy: Use sequence counters with associated lock
netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
netfilter: conntrack: Use sequence counter with associated spinlock
sched: tasks: Use sequence counter with associated spinlock
...
|
||
|
Randy Dunlap
|
b0294f3025 |
time: Delete repeated words in comments
Drop repeated words in kernel/time/. {when, one, into}
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200807033248.8452-1-rdunlap@infradead.org
|
||
|
Linus Torvalds
|
fc80c51fd4 |
Kbuild updates for v5.9
- run the checker (e.g. sparse) after the compiler - remove unneeded cc-option tests for old compiler flags - fix tar-pkg to install dtbs - introduce ccflags-remove-y and asflags-remove-y syntax - allow to trace functions in sub-directories of lib/ - introduce hostprogs-always-y and userprogs-always-y syntax - various Makefile cleanups -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl8wJXEVHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGMGEP/0jDq/WafbfPN0aU83EqEWLt/sKg bluzmf/6HGx3XVRnuAzsHNNqysUx77WJiDsU/jbC/zdH8Iox3Sc1diE2sELLNAfY iJmQ8NBPggyU74aYG3OJdpDjz8T9EX/nVaYrjyFlbuXElM+Qvo8Z4Fz6NpWqKWlA gU+yGxEPPdX6MLHcSPSIu1hGWx7UT4fgfx3zDFTI2qvbQgQjKtzyTjAH5Cm3o87h rfomvHSSoAUg+Fh1LediRh1tJlkdVO+w7c+LNwCswmdBtkZuxecj1bQGUTS8GaLl CCWOKYfWp0KsVf1veXNNNaX/ecbp+Y34WErFq3V9Fdq5RmVlp+FPSGMyjDMRiQ/p LGvzbJLPpG586MnK8of0dOj6Es6tVPuq6WH2HuvsyTGcZJDpFTTxRcK3HDkE8ig6 ZtuM3owB/Mep8IzwY2yWQiDrc7TX5Fz8S4hzGPU1zG9cfj4VT6TBqHGAy1Eql/0l txj6vJpnbQSdXiIX8MIU3yH35Y7eW3JYWgspTZH5Woj1S/wAWwuG93Fuuxq6mQIJ q6LSkMavtOfuCjOA9vJBZewpKXRU6yo0CzWNL/5EZ6z/r/I+DGtfb/qka8oYUDjX 9H0cecL37AQxDHRPTxCZDQF0TpYiFJ6bmnMftK9NKNuIdvsk9DF7UBa3EdUNIj38 yKS3rI7Lw55xWuY3 =bkNQ -----END PGP SIGNATURE----- Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - run the checker (e.g. sparse) after the compiler - remove unneeded cc-option tests for old compiler flags - fix tar-pkg to install dtbs - introduce ccflags-remove-y and asflags-remove-y syntax - allow to trace functions in sub-directories of lib/ - introduce hostprogs-always-y and userprogs-always-y syntax - various Makefile cleanups * tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled kbuild: introduce hostprogs-always-y and userprogs-always-y kbuild: sort hostprogs before passing it to ifneq kbuild: move host .so build rules to scripts/gcc-plugins/Makefile kbuild: Replace HTTP links with HTTPS ones kbuild: trace functions in subdirectories of lib/ kbuild: introduce ccflags-remove-y and asflags-remove-y kbuild: do not export LDFLAGS_vmlinux kbuild: always create directories of targets powerpc/boot: add DTB to 'targets' kbuild: buildtar: add dtbs support kbuild: remove cc-option test of -ffreestanding kbuild: remove cc-option test of -fno-stack-protector Revert "kbuild: Create directory for target DTB" kbuild: run the checker after the compiler |
||
|
Masahiro Yamada
|
15d5761ad3 |
kbuild: introduce ccflags-remove-y and asflags-remove-y
CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular
object, but there is no convenient way to do that for every object in
a directory.
Add ccflags-remove-y and asflags-remove-y to make it easily.
Use ccflags-remove-y to clean up some Makefiles.
The add/remove order works as follows:
[1] KBUILD_CFLAGS specifies compiler flags used globally
[2] ccflags-y adds compiler flags for all objects in the
current Makefile
[3] ccflags-remove-y removes compiler flags for all objects in the
current Makefile (New feature)
[4] CFLAGS_<file> adds compiler flags per file.
[5] CFLAGS_REMOVE_<file> removes compiler flags per file.
Having [3] before [4] allows us to remove flags from most (but not all)
objects in the current Makefile.
For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE)
from all objects in the directory, then adds it back to
trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o
The same applies to lib/livepatch/Makefile.
Please note ccflags-remove-y has no effect to the sub-directories.
In contrast, the previous notation got rid of compiler flags also from
all the sub-directories.
The following are not affected because they have no sub-directories:
arch/arm/boot/compressed/
arch/powerpc/xmon/
arch/sh/
kernel/trace/
However, lib/ has several sub-directories.
To keep the behavior, I added ccflags-remove-y to all Makefiles
in subdirectories of lib/, except the following:
lib/vdso/Makefile - Kbuild does not descend into this Makefile
lib/raid/test/Makefile - This is not used for the kernel build
I think commit
|
||
|
Linus Torvalds
|
32663c78c1 |
Tracing updates for 5.9
- The biggest news in that the tracing ring buffer can now time events that
interrupted other ring buffer events. Before this change, if an interrupt
came in while recording another event, and that interrupt also had an
event, those events would all have the same time stamp as the event it
interrupted. Now, with the new design, those events will have a unique time
stamp and rightfully display the time for those events that were recorded
while interrupting another event.
- Bootconfig how has an "override" operator that lets the users have a
default config, but then add options to override the default.
- A fix was made to properly filter function graph tracing to the ftrace
PIDs. This came in at the end of the -rc cycle, and needs to be backported.
- Several clean ups, performance updates, and minor fixes as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXy3GOBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qphsAP9ci1jtrC2+cMBMCNKb/AFpA/nDaKsD
hpsDzvD0YPOmCAEA9QbZset8wUNG49R4FexP7egQ8Ad2S6Oa5f60jWleDQY=
=lH+q
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- The biggest news in that the tracing ring buffer can now time events
that interrupted other ring buffer events.
Before this change, if an interrupt came in while recording another
event, and that interrupt also had an event, those events would all
have the same time stamp as the event it interrupted.
Now, with the new design, those events will have a unique time stamp
and rightfully display the time for those events that were recorded
while interrupting another event.
- Bootconfig how has an "override" operator that lets the users have a
default config, but then add options to override the default.
- A fix was made to properly filter function graph tracing to the
ftrace PIDs. This came in at the end of the -rc cycle, and needs to
be backported.
- Several clean ups, performance updates, and minor fixes as well.
* tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (39 commits)
tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers
kprobes: Fix compiler warning for !CONFIG_KPROBES_ON_FTRACE
tracing: Use trace_sched_process_free() instead of exit() for pid tracing
bootconfig: Fix to find the initargs correctly
Documentation: bootconfig: Add bootconfig override operator
tools/bootconfig: Add testcases for value override operator
lib/bootconfig: Add override operator support
kprobes: Remove show_registers() function prototype
tracing/uprobe: Remove dead code in trace_uprobe_register()
kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler
ftrace: Fix ftrace_trace_task return value
tracepoint: Use __used attribute definitions from compiler_attributes.h
tracepoint: Mark __tracepoint_string's __used
trace : Have tracing buffer info use kvzalloc instead of kzalloc
tracing: Remove outdated comment in stack handling
ftrace: Do not let direct or IPMODIFY ftrace_ops be added to module and set trampolines
ftrace: Setup correct FTRACE_FL_REGS flags for module
tracing/hwlat: Honor the tracing_cpumask
tracing/hwlat: Drop the duplicate assignment in start_kthread()
tracing: Save one trace_event->type by using __TRACE_LAST_TYPE
...
|
||
|
Steven Rostedt (VMware)
|
38ce2a9e33 |
tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers
As trace_array_printk() used with not global instances will not add noise to the main buffer, they are OK to have in the kernel (unlike trace_printk()). This require the subsystem to create their own tracing instance, and the trace_array_printk() only writes into those instances. Add trace_array_init_printk() to initialize the trace_printk() buffers without printing out the WARNING message. Reported-by: Sean Paul <sean@poorly.run> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |