The preferred bpp for the fbdev emulation buffer has been 32 so far, which
means that by default we will allocate an 8MB buffer with a 1920x1080
resolution.
Worse this memory will be allocated from the CMA pool, and will never be
freed even if we don't use the fbdev emulation. Therefore, reducing it is a
big deal, and switching to 16bpp by default will gain us around 4MB at
1920x1080, while keeping decent color depth. And users still have the
option to switch to 32bpp using the kernel command line.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306140245.21973-1-maxime.ripard@bootlin.com
In order to test whether the load tracker is working as expected, we
need the ability to compare the commit result with the underrun
indication. With the load tracker always enabled, commits that are
expected to trigger an underrun are always rejected, so userspace
cannot get the actual underrun indication from the hardware.
Add a debugfs entry to disable/enable the load tracker, so that a DRM
commit expected to trigger an underrun can go through with the load
tracker disabled. The underrun indication is then available to
userspace and can be checked against the commit result with the load
tracker enabled.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220155124.25022-4-paul.kocialkowski@bootlin.com
The HVS block is supposed to fill the pixelvalve FIFOs fast enough to
meet the requested framerate. The problem is, the HVS and memory bus
bandwidths are limited, and if we don't take these limitations into
account we might end up with HVS underflow errors.
This patch is trying to model the per-plane HVS and memory bus bandwidth
consumption and take a decision at atomic_check() time whether the
estimated load will fit in the HVS and membus budget.
Note that we take an extra margin on the memory bus consumption to let
the system run smoothly when other blocks are doing heavy use of the
memory bus. Same goes for the HVS limit, except the margin is smaller in
this case, since the HVS is not used by external components.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220155124.25022-3-paul.kocialkowski@bootlin.com
Add a debugfs entry and helper for reporting HVS underrun errors as
well as helpers for masking and unmasking the underrun interrupts.
Add an IRQ handler and initial IRQ configuration.
Rework related register definitions to take the channel number.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220155124.25022-2-paul.kocialkowski@bootlin.com
The DP 1.4 spec defines the SDP header and SDP contents for
a Picture Parameter Set (PPS) that must be sent in advance
of DSC transmission to define the encoding characteristics.
This was done in one struct, drm_dsc_pps_infoframe, which
conatined the SDP header and PPS. Because the PPS is
a property of DSC over any connector, not just DP, and because
drm drivers may have their own SDP structs they wish to use,
make the functions that initialise SDP and PPS headers take
the components they operate on, not drm_dsc_pps_infoframe,
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-4-David.Francis@amd.com
Native 420 and 422 transfer modes are new in DSC1.2
In these modes, each two pixels of a slice are treated as one
pixel, so the slice width is half as large (round down) for
the purposes of calucating the groups per line and chunk size
in bytes
In native 422 mode, each pixel has four components, so the
mux component of a group is larger by one additional mux word
and one additional component
Now that there is native 422 support, the configuration option
previously called enable422 is renamed to simple_422 to avoid
confusion
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-3-David.Francis@amd.com
The function intel_compute_rc_parameters is part of the dsc spec
and is not driver-specific. Other drm drivers might like to use
it. The function is not changed; just moved and renamed.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-2-David.Francis@amd.com
- Block fb changes for async atomic updates to prevent a use after free.
- Fix ID mismatch error on load in bochs.
- Fix memory leak when drm_setup fails.
- Fixes around handling of DRM_AUTH.
-
-----BEGIN PGP SIGNATURE-----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=Rf1K
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-02-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-fixes for v5.0:
- Block fb changes for async atomic updates to prevent a use after free.
- Fix ID mismatch error on load in bochs.
- Fix memory leak when drm_setup fails.
- Fixes around handling of DRM_AUTH.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/42113611-e2cd-6bdd-7de5-4f8ab5a0cbe6@linux.intel.com
In VRR mode, keep track of the vblank count of the last
completed pageflip in amdgpu_crtc->last_flip_vblank, as
recorded in the pageflip completion handler after each
completed flip.
Use that count to prevent mmio programming a new pageflip
within the same vblank in which the last pageflip completed,
iow. to throttle pageflips to at most one flip per video
frame, while at the same time allowing to request a flip
not only before start of vblank, but also anywhere within
vblank.
The old logic did the same, and made sense for regular fixed
refresh rate flipping, but in vrr mode it prevents requesting
a flip anywhere inside the possibly huge vblank, thereby
reducing framerate in vrr mode instead of improving it, by
delaying a slightly delayed flip requests up to a maximum
vblank duration + 1 scanout duration. This would limit VRR
usefulness to only help applications with a very high GPU
demand, which can submit the flip request before start of
vblank, but then have to wait long for fences to complete.
With this method a flip can be both requested and - after
fences have completed - executed, ie. it doesn't matter if
the request (amdgpu_dm_do_flip()) gets delayed until deep
into the extended vblank due to cpu execution delays. This
also allows clients which want to regulate framerate within
the vrr range a much more fine-grained control of flip timing,
a feature that might be useful for video playback, and is
very useful for neuroscience/vision research applications.
In regular non-VRR mode, retain the old flip submission
behavior. This to keep flip scheduling for fullscreen X11/GLX
OpenGL clients intact, if they use the GLX_OML_sync_control
extensions glXSwapBufferMscOML(, ..., target_msc,...) function
with a specific target_msc target vblank count.
glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will
not flip at the proper target_msc for a non-zero target_msc
if VRR mode is active with this patch. They'd often flip one
frame too early. However, this limitation should not matter
much in VRR mode, as scheduling based on vblank counts is
pretty futile/unusable under variable refresh duration
anyway, so no real extra harm is done.
According to some testing already done with this patch by
Nicholas on top of my tests, IGT tests didn't report any
problems. If fixes stuttering and flickering when flipping
at rates below the minimum vrr refresh rate.
Fixes: bb47de7366 ("drm/amdgpu: Set FreeSync state using drm VRR
properties")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Tested-by: Bruno Filipe <bmilreu@gmail.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This protects device resources from use after device removal.
There are 3 ways for driver-device unbinding to happen:
- The driver module is unloaded causing the driver to be unregistered.
This can't happen as long as there are open file handles because a
reference is taken on the module.
- The device is removed (Device Tree overlay unloading).
This can happen at any time.
- The driver sysfs unbind file can be used to unbind the driver from the
device. This can happen any time.
v2: Since drm_atomic_helper_shutdown() has to be called after
drm_dev_unplug() we don't want do block ->disable after unplug.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-8-noralf@tronnes.org
No more users left so it can go alongside its helpers.
Update the tinydrm docs description and remove todo entry.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-7-noralf@tronnes.org
This adds a resource managed (devres) version of drm_dev_init().
v2: Remove devm_drm_dev_register() since we can't touch hw in devm
release functions and drivers want to disable hw on driver module
unload (Daniel Vetter, Greg KH)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-3-noralf@tronnes.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlx8YYIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGs5MIAIiVVIH+C0St60vf
nzfGpVe+BETe199UveM4Ic2FWMk97ZhSk5Oj6HwYY9vnw4iwoRCZIO5B8Dna4nxY
8XjiwxpJRVLq+7Y1d61O6NHo6UjFHF0GMzyeJeNNUq+mCISxZdLsqzsszt9X09mA
GoJjZ0UMw2Tkz/s3Ie4MumKASc+y2CjJc0ZVEZlJsMaqMJLIfUn/CrTzHBivmuqJ
sV6ZkP4as6h87bI9mi79p8pzvVooCRJ10cg4A/DHG4t2bEAIlB4t5dfZRFzVMhVo
cCPRk9tiA9y4I3zBjcuAZMODcBpfdWoQK8TqYw2cDS3LEDMgnEdIH6snMYHr69z0
kZJjA2A=
=Qs0l
-----END PGP SIGNATURE-----
Merge v5.0 into drm-next
There is a really hairy resolution involving amdgpu fixes, that I'd rather confirm here.
Also some misc fixes are landed by me, but the pr has them as well.
Signed-off-by: Dave Airlie <airlied@redhat.com>
VI planes support coarse scaling which helps to overcome VI scaler
limitations. While exact working of coarse scaling isn't known, it seems
that it just skips programmed amount of rows and columns. This is
especially useful for downscaling very big planes (4K down to 1080p).
Horizontal coarse scaling is currently used to fit one line to VI scaler
buffer.
Vertical coarse scaling is used to assure that VI scaler is actually
capable of processing framebuffer in one frame time.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228200329.11128-4-jernej.skrabec@siol.net
While all RGB scalers have maximum line size of 2048, some YUV scalers
have maximum line size of 2048 and some have line size of 4096.
Since there is no rule for that, add a quirk.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228200329.11128-3-jernej.skrabec@siol.net
Just run drm_prime_pages_to_sg() on the ttm pages list to get an
sg_table for export. The pages list is created at object initialization
time, so there should be no need to handle an unpopulated page list.
Add a sanity check nevertheless.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190227144441.6755-4-kraxel@redhat.com
virtio-gpu objects never move around, so effectively they are
pinned all the time. Therefore we don't need the (optional)
pin/unpin callbacks. Remove them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190227144441.6755-3-kraxel@redhat.com
When running RISC-V QEMU with the Bochs device attached via PCIe the
probe of the Bochs device fails with:
[drm:bochs_hw_init] *ERROR* ID mismatch
This was introduced by this commit:
7780eb9ce8 bochs: convert to drm_dev_register
To fix the error we ensure that pci_enable_device() is called before
bochs_load().
Fixes: 7780eb9ce8 ("bochs: convert to drm_dev_register")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190221003231.31625-1-alistair.francis@wdc.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The prepare_fb call always happens on new_plane_state.
The drm_atomic_helper_cleanup_planes checks to see if
plane state pointer has changed when deciding to call cleanup_fb on
either the new_plane_state or the old_plane_state.
For a non-async atomic commit the state pointer is swapped, so this
helper calls prepare_fb on the new_plane_state and cleanup_fb on the
old_plane_state. This makes sense, since we want to prepare the
framebuffer we are going to use and cleanup the the framebuffer we are
no longer using.
For the async atomic update helpers this differs. The async atomic
update helpers perform in-place updates on the existing state. They call
drm_atomic_helper_cleanup_planes but the state pointer is not swapped.
This means that prepare_fb is called on the new_plane_state and
cleanup_fb is called on the new_plane_state (not the old).
In the case where old_plane_state->fb == new_plane_state->fb then
there should be no behavioral difference between an async update
and a non-async commit. But there are issues that arise when
old_plane_state->fb != new_plane_state->fb.
The first is that the new_plane_state->fb is immediately cleaned up
after it has been prepared, so we're using a fb that we shouldn't
be.
The second occurs during a sequence of async atomic updates and
non-async regular atomic commits. Suppose there are two framebuffers
being interleaved in a double-buffering scenario, fb1 and fb2:
- Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2
We call cleanup_fb on fb2 twice in this example scenario, and any
further use will result in use-after-free.
The simple fix to this problem is to block framebuffer changes
in the drm_atomic_helper_async_check function for now.
v2: Move check by itself, add a FIXME (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: <stable@vger.kernel.org> # v4.14+
Fixes: fef9df8b59 ("drm/atomic: initial support for asynchronous plane update")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/275364/
Signed-off-by: Dave Airlie <airlied@redhat.com>
- Add a mechanism to only send commit done events once all pending
updates have been applied. This closes a small race window where
already armed events could fire even though the double buffered
hardware update just missed the update window.
- Add plane zpos property support to allow placing the overlay plane
behind the primary plane.
- Allow building imx-drm on all platforms under COMPILE_TEST.
-----BEGIN PGP SIGNATURE-----
iI4EABYIADYWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXG/bAhgccGhpbGlwcC56
YWJlbEBnbWFpbC5jb20ACgkQ1YWnJRg3YsAz6wEA4ThGF7nvouYeI2jLEuLmkIpr
wXdyGA5XScfoSQUgFisBAPGl+g578KjIq7PrazKAEoKeencLytlf8mWCl99YZukB
=Veu5
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2019-02-22' of git://git.pengutronix.de/pza/linux into drm-next
drm/imx: handle pending updates better, add plane zpos property support
- Add a mechanism to only send commit done events once all pending
updates have been applied. This closes a small race window where
already armed events could fire even though the double buffered
hardware update just missed the update window.
- Add plane zpos property support to allow placing the overlay plane
behind the primary plane.
- Allow building imx-drm on all platforms under COMPILE_TEST.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <pza@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222112350.m3ucezilqx6cyest@pengutronix.de
After an event is sent, we try to copy it into the user buffer of the
first waiter in drm_read() and if the user buffer doesn't have enough
room we put it back onto the list. However, we didn't wake up any
subsequent waiter, so that event may sit on the list until either a new
vblank event is sent or a new waiter appears. Rare, but in the worst
case may lead to a stuck process.
Testcase: igt/drm_read/short-buffer-wakeup
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170804082328.17173-1-chris@chris-wilson.co.uk
In VRR mode, keep track of the vblank count of the last
completed pageflip in amdgpu_crtc->last_flip_vblank, as
recorded in the pageflip completion handler after each
completed flip.
Use that count to prevent mmio programming a new pageflip
within the same vblank in which the last pageflip completed,
iow. to throttle pageflips to at most one flip per video
frame, while at the same time allowing to request a flip
not only before start of vblank, but also anywhere within
vblank.
The old logic did the same, and made sense for regular fixed
refresh rate flipping, but in vrr mode it prevents requesting
a flip anywhere inside the possibly huge vblank, thereby
reducing framerate in vrr mode instead of improving it, by
delaying a slightly delayed flip requests up to a maximum
vblank duration + 1 scanout duration. This would limit VRR
usefulness to only help applications with a very high GPU
demand, which can submit the flip request before start of
vblank, but then have to wait long for fences to complete.
With this method a flip can be both requested and - after
fences have completed - executed, ie. it doesn't matter if
the request (amdgpu_dm_do_flip()) gets delayed until deep
into the extended vblank due to cpu execution delays. This
also allows clients which want to regulate framerate within
the vrr range a much more fine-grained control of flip timing,
a feature that might be useful for video playback, and is
very useful for neuroscience/vision research applications.
In regular non-VRR mode, retain the old flip submission
behavior. This to keep flip scheduling for fullscreen X11/GLX
OpenGL clients intact, if they use the GLX_OML_sync_control
extensions glXSwapBufferMscOML(, ..., target_msc,...) function
with a specific target_msc target vblank count.
glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will
not flip at the proper target_msc for a non-zero target_msc
if VRR mode is active with this patch. They'd often flip one
frame too early. However, this limitation should not matter
much in VRR mode, as scheduling based on vblank counts is
pretty futile/unusable under variable refresh duration
anyway, so no real extra harm is done.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently there is a small race window where we could manage to arm the
vblank event from atomic flush, but programming the hardware was too close
to the frame end, so the hardware will only apply the current state on the
next vblank. In this case we will send out the commit done event too early
causing userspace to reuse framebuffes that are still in use.
Instead of using the event arming mechnism, just remember the pending event
and send it from the vblank IRQ handler, once we are sure that all state
has been applied successfully.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: inverted logic: done -> pending, added back
spinlock in atomic_flush, commit message typo fix]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Allow to compile-test imx-drm on other platforms.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Since the TVE provides a clock to the DI, the driver can only be
compiled if the common clock framework is enabled. With the COMMON_CLK
dependency in place, it will be possible to allow building the other
parts of imx-drm under COMPILE_TEST on architectures that do not select
the common clock framework.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Add a zpos property to planes. Call drm_atomic_helper_check() instead of
calling drm_atomic_helper_check_modeset() and drm_atomic_check_planes()
manually. This effectively adds a call to drm_atomic_normalize_zpos()
before checking planes. Reorder atomic update to allow changing plane
zpos without modeset.
Note that the initial zpos is set in ipu_plane_state_reset(). The
initial value set in ipu_plane_init() is just for show. The zpos
parameter of drm_plane_create_zpos_property() is ignored because
the newly created plane do not have state yet.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Marius Vlad <marius.vlad@collabora.com>
This function allows upper layer to check if a requested atomic update
to the plane has been applied or is still pending.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: inverted logic: done -> pending]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Fixes for 5.1:
amdgpu:
- Fix missing fw declaration after dropping old CI DPM code
- Fix debugfs access to registers beyond the MMIO bar size
- Fix context priority handling
- Add missing license on some new files
- Various cleanups and bug fixes
radeon:
- Fix missing break in CS parser for evergreen
- Various cleanups and bug fixes
sched:
- Fix entities with 0 run queues
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221214134.3308-1-alexander.deucher@amd.com
A bit bigger than normal for this week due to fixes for some long
standing display issues that are bound for stable. These changes would
be going to stable anyway, so I figured it was better via 5.0 than 5.1.
- Several display fixes
- Fix PX systems due to core changes in runtime pm
- Disable bulk moves. They are fixed in 5.1, but fix is too invasive for 5.0
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220225715.3240-1-alexander.deucher@amd.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/qxl/qxl_display.c: In function 'qxl_primary_atomic_update':
drivers/gpu/drm/qxl/qxl_display.c:538:17: warning:
variable 'bo_old' set but not used [-Wunused-but-set-variable]
It's not used any more after 4979904c62 ("drm/qxl: use shadow bo directly")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190218085459.196470-1-yuehaibing@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When running RISC-V QEMU with the Bochs device attached via PCIe the
probe of the Bochs device fails with:
[drm:bochs_hw_init] *ERROR* ID mismatch
This was introduced by this commit:
7780eb9ce8 bochs: convert to drm_dev_register
To fix the error we ensure that pci_enable_device() is called before
bochs_load().
Fixes: 7780eb9ce8 ("bochs: convert to drm_dev_register")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190221003231.31625-1-alistair.francis@wdc.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
