Some settings should set to default value after the calibration.
This patch also disables the 25MHz and 1MHz clock power when the jack unplugged.
The JD is triggered by JDH, therefore this patch removes JDL setting.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200717070228.28660-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pin status of the widget was connected after the sound card registered.
The rt5682_headset_detect function will use the pin status of these two widgets
to decide the certain register setting on/off.
Therefore this patch disables the pin of these two widgets in the codec probe.
This patch could avoid the misjudgment.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200717070256.28712-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87pn95wiwa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87r1tlwiwe.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/87sge1wiwi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87tuyhwiwm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87v9ixwiwr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87wo3dwiwv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87y2ntwix0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87zh89wix5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/871rllxxhp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/873661xxhu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/874kqhxxhz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/875zaxxxi4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
For hdmi-codec, we need to update struct hdmi_codec_ops,
and all its users in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87d055xxj2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() will return -ENOTSUPP if driver doesn't
support mute.
In hdmi-codec case, hdmi_codec_digital_mute() will be used for it,
and each driver has .digital_mute() callback.
hdmi_codec_digital_mute() want to return -ENOTSUPP to follow it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fta1xxjc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Both Lee Jones and I submitted separate series, this is the second
part of the merged result, for which no feedback was provided.
I picked Lee's patches for rt5659 and ak4458 and added the pxa and
ux500 that I didn't fix. The rest is largely identical between our
respective series, with the exception of the sunxi which I documented
and Lee removed. I don't have any specific preference and will go with
the flow on this.
Changes since v3:
Improved commit subjects from 'fix kernel-doc' as suggested by Lee
Jones. In a couple of cases I just reverted to Lee's patches when the
code was identical.
Added a couple of CC: tags from Lee's patches.
Added Arnaud Pouliquen's Acked-by tag in first patch.
Lee Jones (6):
ASoC: sunxi: sun4i-spdif: Fix misspelling of 'reg_dac_txdata' in
kernel-doc
ASoC: pxa: pxa-ssp: Demote seemingly unintentional kerneldoc header
ASoC: ux500: ux500_msp_i2s: Remove unused variables 'reg_val_DR' and
'reg_val_TSTDR'
ASoC: codecs: rt5659: Remove many unused const variables
ASoC: codecs: tlv320aic26: Demote seemingly unintentional kerneldoc
header
ASoC: codecs: ak4458: Remove set but never checked variable 'ret'
Pierre-Louis Bossart (4):
ASoC: sti: uniperif: fix 'defined by not used' warning
ASoC: qcom: qdsp6: q6asm: Provide documentation for 'codec_profile'
ASoC: sunxi: sun4i-i2s: add missing clock and format arguments in
kernel-doc
ASoC: codecs: rt5631: fix spurious kernel-doc start and missing
arguments
sound/soc/codecs/ak4458.c | 6 +++---
sound/soc/codecs/rt5631.c | 8 +++++--
sound/soc/codecs/rt5659.c | 37 ---------------------------------
sound/soc/codecs/tlv320aic26.c | 2 +-
sound/soc/pxa/pxa-ssp.c | 2 +-
sound/soc/qcom/qdsp6/q6asm.c | 2 +-
sound/soc/sti/uniperif.h | 2 +-
sound/soc/sunxi/sun4i-i2s.c | 10 ++++++++-
sound/soc/sunxi/sun4i-spdif.c | 2 +-
sound/soc/ux500/ux500_msp_i2s.c | 8 +++----
10 files changed, 27 insertions(+), 52 deletions(-)
base-commit: 6940701c71
--
2.25.1
Looks as though the result of snd_soc_update_bits() has never been checked.
Fixes the following W=1 kernel build warning(s):
sound/soc/codecs/ak4458.c: In function ‘ak4458_set_dai_mute’:
sound/soc/codecs/ak4458.c:408:16: warning: variable ‘ret’ set but not
used [-Wunused-but-set-variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp>
Cc: Mihai Serban <mihai.serban@nxp.com>
Link: https://lore.kernel.org/r/20200709162328.259586-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the only use of kerneldoc in the sourcefile and no
descriptions are provided.
Fixes the following W=1 kernel build warning(s):
sound/soc/codecs/tlv320aic26.c:138: warning: Function parameter or
member 'dai' not described in 'aic26_mute'
sound/soc/codecs/tlv320aic26.c:138: warning: Function parameter or
member 'mute' not described in 'aic26_mute'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Link: https://lore.kernel.org/r/20200709162328.259586-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks as though they've never been used.
Fixes the following W=1 kernel build warning(s):
In file included from sound/soc/codecs/rt5659.c:25:
In file included from sound/soc/codecs/rt5659.c:25:
sound/soc/codecs/rt5659.c:1232:2: warning: ‘rt5659_ad_monor_asrc_enum’ defined but not used [-Wunused-const-variable=]
1232 | rt5659_ad_monor_asrc_enum, RT5659_ASRC_3, RT5659_AD_MONO_R_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1231:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1231 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5659.c:1228:2: warning: ‘rt5659_ad_monol_asrc_enum’ defined but not used [-Wunused-const-variable=]
1228 | rt5659_ad_monol_asrc_enum, RT5659_ASRC_3, RT5659_AD_MONO_L_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1227:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1227 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5659.c:1224:2: warning: ‘rt5659_ad_sto2_asrc_enum’ defined but not used [-Wunused-const-variable=]
1224 | rt5659_ad_sto2_asrc_enum, RT5659_ASRC_3, RT5659_AD_STO2_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1223:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1223 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5659.c:1220:2: warning: ‘rt5659_ad_sto1_asrc_enum’ defined but not used [-Wunused-const-variable=]
1220 | rt5659_ad_sto1_asrc_enum, RT5659_ASRC_2, RT5659_AD_STO1_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1219:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1219 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5659.c:1216:2: warning: ‘rt5659_da_monor_asrc_enum’ defined but not used [-Wunused-const-variable=]
1216 | rt5659_da_monor_asrc_enum, RT5659_ASRC_2, RT5659_DA_MONO_R_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1215:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1215 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5659.c:1212:2: warning: ‘rt5659_da_monol_asrc_enum’ defined but not used [-Wunused-const-variable=]
1212 | rt5659_da_monol_asrc_enum, RT5659_ASRC_2, RT5659_DA_MONO_L_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1211:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1211 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5659.c:1208:2: warning: ‘rt5659_da_sto_asrc_enum’ defined but not used [-Wunused-const-variable=]
1208 | rt5659_da_sto_asrc_enum, RT5659_ASRC_2, RT5659_DA_STO_T_SFT, 0x7,
| ^~~~~~~~~~~~~~~~~~~~~~~
include/sound/soc.h:359:24: note: in definition of macro ‘SOC_VALUE_ENUM_DOUBLE_DECL’
359 | const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, | ^~~~
sound/soc/codecs/rt5659.c:1207:8: note: in expansion of macro ‘SOC_VALUE_ENUM_SINGLE_DECL’
1207 | static SOC_VALUE_ENUM_SINGLE_DECL(
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200709162328.259586-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes the following W=1 kernel build warning(s):
sound/soc/codecs/rt5631.c:72: warning: Function parameter or member
'component' not described in 'rt5631_write_index'
sound/soc/codecs/rt5631.c:72: warning: Function parameter or member
'reg' not described in 'rt5631_write_index'
sound/soc/codecs/rt5631.c:72: warning: Function parameter or member
'value' not described in 'rt5631_write_index'
sound/soc/codecs/rt5631.c:82: warning: Function parameter or member
'component' not described in 'rt5631_read_index'
sound/soc/codecs/rt5631.c:82: warning: Function parameter or member
'reg' not described in 'rt5631_read_index'
sound/soc/codecs/rt5631.c:367: warning: Function parameter or member
'component' not described in 'onebit_depop_power_stage'
sound/soc/codecs/rt5631.c:405: warning: Function parameter or member
'component' not described in 'onebit_depop_mute_stage'
sound/soc/codecs/rt5631.c:443: warning: Function parameter or member
'component' not described in 'depop_seq_power_stage'
sound/soc/codecs/rt5631.c:515: warning: Function parameter or member
'component' not described in 'depop_seq_mute_stage'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200709162328.259586-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the TX offset slot programming. There is no RX offset slot
register.
Since there is no RX offset the check for slot symmetry can be removed.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200709185129.10505-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warning and removed unused table. In this case this a
duplicate of
static const struct of_device_id max98390_of_match[] = {
{ .compatible = "maxim,max98390", },
{}
};
MODULE_DEVICE_TABLE(of, max98390_of_match);
already used in the rest of the code.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200707190612.97799-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes the following W=1 kernel build warning(s):
In file included from include/sound/tlv.h:10,
from sound/soc/codecs/jz4770.c:19:
sound/soc/codecs/jz4770.c:306:35: warning: ‘mic_boost_tlv’ defined but not used [-Wunused-const-variable=]
306 | static const DECLARE_TLV_DB_SCALE(mic_boost_tlv, 0, 400, 0);
| ^~~~~~~~~~~~~
include/uapi/sound/tlv.h:64:15: note: in definition of macro ‘SNDRV_CTL_TLVD_DECLARE_DB_SCALE’
64 | unsigned int name[] = { | ^~~~
sound/soc/codecs/jz4770.c:306:14: note: in expansion of macro ‘DECLARE_TLV_DB_SCALE’
306 | static const DECLARE_TLV_DB_SCALE(mic_boost_tlv, 0, 400, 0);
| ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cc: ter Huurne <maarten@treewalker.org>
Link: https://lore.kernel.org/r/20200707190612.97799-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warning, the kernel-doc syntax was probably from Doxygen?
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200707190612.97799-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SoundWire specific parts and extend common ones already split from
I2C.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200708203215.231776-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To prepare support for SoundWire, let's first split the I2C and common
parts. No new functionality, just indents and formatting to make
checkpatch happy.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200708203215.231776-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While experimenting and introducing errors in Baytrail topology files
until I got them right, I encountered multiple kernel oopses and
memory leaks. This is a first batch to harden the code, but we should
probably think of a tool to fuzz the topology...
Pierre-Louis Bossart (5):
ASoC: topology: fix kernel oops on route addition error
ASoC: topology: fix tlvs in error handling for widget_dmixer
ASoC: topology: use break on errors, not continue
ASoC: topology: factor kfree(se) in error handling
ASoC: topology: add more logs when topology load fails.
sound/soc/soc-topology.c | 97 ++++++++++++++++++++++++----------------
1 file changed, 58 insertions(+), 39 deletions(-)
base-commit: a5911ac579
--
2.25.1
This adds default clock/PLL configuration to the driver
for usage with generic drivers like simple-card for usage
with a fixed rate clock.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200626164623.87894-1-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the not really descriptive dev_gpio quirk / setting to
gpio1_is_irq, which describes what it actually does.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200703100823.258033-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
platform_data is an obsolete concept, instead device_properties,
set through e.g. device-tree, should be used.
struct rt5670_platform_data is only used internally by the rt5670 codec
driver, so lets remove it before someone starts relying on it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200703100823.258033-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warnings
cs4270.c:508: warning: Function parameter or member 'component' not
described in 'cs4270_probe'
cs4270.c:508: warning: Excess function parameter 'pdev' description in
'cs4270_probe'
cs4270.c:548: warning: Function parameter or member 'component' not
described in 'cs4270_remove'
cs4270.c:548: warning: Excess function parameter 'pdev' description in
'cs4270_remove'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200701181320.80848-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.
E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.
Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200628155231.71089-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Miix 2 10 has a keyboard dock with extra speakers in the dock.
Rather then the ACL5672's GPIO1 pin being used as IRQ to the CPU, it is
actually used to enable the amplifier for these speakers
(the IRQ to the CPU comes directly from the jack-detect switch).
Add a quirk for having an ext speaker-amplifier enable pin on GPIO1
and replace the Lenovo Miix 2 10's dmi_system_id table entry's wrong
GPIO_DEV quirk (which needs to be renamed to GPIO1_IS_IRQ) with the
new RT5670_GPIO1_IS_EXT_SPK_EN quirk, so that we enable the external
speaker-amplifier as necessary.
Also update the ident field for the dmi_system_id table entry, the
Miix models are not Thinkpads.
Fixes: 67e03ff3f3 ("ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirk")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723
Link: https://lore.kernel.org/r/20200628155231.71089-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
