The code incorrectly assigned directly to the variables instead of the
values they point to. Since the values are already set to NULL/0 at the
beginning of the function, we can simply remove these useless
assignments.
Reported-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Fixes: fede148324 ("selinux: log invalid contexts in AVCs")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: removed a bad comment that was causing compiler warnings]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The flex arrays were being used for constant sized arrays, so there's no
benefit to using flex_arrays over something simpler.
Link: http://lkml.kernel.org/r/20181217131929.11727-4-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=57/1
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20190305' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"A lucky 13 audit patches for v5.1.
Despite the rather large diffstat, most of the changes are from two
bug fix patches that move code from one Kconfig option to another.
Beyond that bit of churn, the remaining changes are largely cleanups
and bug-fixes as we slowly march towards container auditing. It isn't
all boring though, we do have a couple of new things: file
capabilities v3 support, and expanded support for filtering on
filesystems to solve problems with remote filesystems.
All changes pass the audit-testsuite. Please merge for v5.1"
* tag 'audit-pr-20190305' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: mark expected switch fall-through
audit: hide auditsc_get_stamp and audit_serial prototypes
audit: join tty records to their syscall
audit: remove audit_context when CONFIG_ AUDIT and not AUDITSYSCALL
audit: remove unused actx param from audit_rule_match
audit: ignore fcaps on umount
audit: clean up AUDITSYSCALL prototypes and stubs
audit: more filter PATH records keyed on filesystem magic
audit: add support for fcaps v3
audit: move loginuid and sessionid from CONFIG_AUDITSYSCALL to CONFIG_AUDIT
audit: add syscall information to CONFIG_CHANGE records
audit: hand taken context to audit_kill_trees for syscall logging
audit: give a clue what CONFIG_CHANGE op was involved
-----BEGIN PGP SIGNATURE-----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=F/Ep
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20190305' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux updates from Paul Moore:
"Nine SELinux patches for v5.1, all bug fixes.
As far as I'm concerned, nothing really jumps out as risky or special
to me, but each commit has a decent description so you can judge for
yourself. As usual, everything passes the selinux-testsuite; please
merge for v5.1"
* tag 'selinux-pr-20190305' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix avc audit messages
selinux: replace BUG_ONs with WARN_ONs in avc.c
selinux: log invalid contexts in AVCs
selinux: replace some BUG_ON()s with a WARN_ON()
selinux: inline some AVC functions used only once
selinux: do not override context on context mounts
selinux: never allow relabeling on context mounts
selinux: stop passing MAY_NOT_BLOCK to the AVC upon follow_link
selinux: avoid silent denials in permissive mode under RCU walk
The audit_rule_match() struct audit_context *actx parameter is not used
by any in-tree consumers (selinux, apparmour, integrity, smack).
The audit context is an internal audit structure that should only be
accessed by audit accessor functions.
It was part of commit 03d37d25e0 ("LSM/Audit: Introduce generic
Audit LSM hooks") but appears to have never been used.
Remove it.
Please see the github issue
https://github.com/linux-audit/audit-kernel/issues/107
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: fixed the referenced commit title]
Signed-off-by: Paul Moore <paul@paul-moore.com>
In case a file has an invalid context set, in an AVC record generated
upon access to such file, the target context is always reported as
unlabeled. This patch adds new optional fields to the AVC record
(srawcon and trawcon) that report the actual context string if it
differs from the one reported in scontext/tcontext. This is useful for
diagnosing SELinux denials involving invalid contexts.
To trigger an AVC that illustrates this situation:
# setenforce 0
# touch /tmp/testfile
# setfattr -n security.selinux -v system_u:object_r:banana_t:s0 /tmp/testfile
# runcon system_u:system_r:sshd_t:s0 cat /tmp/testfile
AVC before:
type=AVC msg=audit(1547801083.248:11): avc: denied { open } for pid=1149 comm="cat" path="/tmp/testfile" dev="tmpfs" ino=6608 scontext=system_u:system_r:sshd_t:s0 tcontext=system_u:object_r:unlabeled_t:s15:c0.c1023 tclass=file permissive=1
AVC after:
type=AVC msg=audit(1547801083.248:11): avc: denied { open } for pid=1149 comm="cat" path="/tmp/testfile" dev="tmpfs" ino=6608 scontext=system_u:system_r:sshd_t:s0 tcontext=system_u:object_r:unlabeled_t:s15:c0.c1023 tclass=file permissive=1 trawcon=system_u:object_r:banana_t:s0
Note that it is also possible to encounter this situation with the
'scontext' field - e.g. when a new policy is loaded while a process is
running, whose context is not valid in the new policy.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1135683
Cc: Daniel Walsh <dwalsh@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
There are no longer users of selinux_is_enabled().
Remove it. As selinux_is_enabled() is the only reason
for include/linux/selinux.h remove that as well.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Before this patch, during a policy reload the sidtab would become frozen
and trying to map a new context to SID would be unable to add a new
entry to sidtab and fail with -ENOMEM.
Such failures are usually propagated into userspace, which has no way of
distignuishing them from actual allocation failures and thus doesn't
handle them gracefully. Such situation can be triggered e.g. by the
following reproducer:
while true; do load_policy; echo -n .; sleep 0.1; done &
for (( i = 0; i < 1024; i++ )); do
runcon -l s0:c$i echo -n x || break
# or:
# chcon -l s0:c$i <some_file> || break
done
This patch overhauls the sidtab so it doesn't need to be frozen during
policy reload, thus solving the above problem.
The new SID table leverages the fact that SIDs are allocated
sequentially and are never invalidated and stores them in linear buckets
indexed by a tree structure. This brings several advantages:
1. Fast SID -> context lookup - this lookup can now be done in
logarithmic time complexity (usually in less than 4 array lookups)
and can still be done safely without locking.
2. No need to re-search the whole table on reverse lookup miss - after
acquiring the spinlock only the newly added entries need to be
searched, which means that reverse lookups that end up inserting a
new entry are now about twice as fast.
3. No need to freeze sidtab during policy reload - it is now possible
to handle insertion of new entries even during sidtab conversion.
The tree structure of the new sidtab is able to grow automatically to up
to about 2^31 entries (at which point it should not have more than about
4 tree levels). The old sidtab had a theoretical capacity of almost 2^32
entries, but half of that is still more than enough since by that point
the reverse table lookups would become unusably slow anyway...
The number of entries per tree node is selected automatically so that
each node fits into a single page, which should be the easiest size for
kmalloc() to handle.
Note that the cache for reverse lookup is preserved with equivalent
logic. The only difference is that instead of storing pointers to the
hash table nodes it stores just the indices of the cached entries.
The new cache ensures that the indices are loaded/stored atomically, but
it still has the drawback that concurrent cache updates may mess up the
contents of the cache. Such situation however only reduces its
effectivity, not the correctness of lookups.
Tested by selinux-testsuite and thoroughly tortured by this simple
stress test:
```
function rand_cat() {
echo $(( $RANDOM % 1024 ))
}
function do_work() {
while true; do
echo -n "system_u:system_r:kernel_t:s0:c$(rand_cat),c$(rand_cat)" \
>/sys/fs/selinux/context 2>/dev/null || true
done
}
do_work >/dev/null &
do_work >/dev/null &
do_work >/dev/null &
while load_policy; do echo -n .; sleep 0.1; done
kill %1
kill %2
kill %3
```
Link: https://github.com/SELinuxProject/selinux-kernel/issues/38
Reported-by: Orion Poplawski <orion@nwra.com>
Reported-by: Li Kun <hw.likun@huawei.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: most of sidtab.c merged by hand due to conflicts]
[PM: checkpatch fixes in mls.c, services.c, sidtab.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
This moves handling of initial SIDs into a separate table. Note that the
SIDs stored in the main table are now shifted by SECINITSID_NUM and
converted to/from the actual SIDs transparently by helper functions.
This change doesn't make much sense on its own, but it simplifies
further sidtab overhaul in a succeeding patch.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: fixed some checkpatch warnings on line length, whitespace]
Signed-off-by: Paul Moore <paul@paul-moore.com>
This is a purely cosmetic change that encapsulates the three-step sidtab
conversion logic (shutdown -> clone -> map) into a single function
defined in sidtab.c (as opposed to services.c).
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: whitespaces fixes to make checkpatch happy]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The intended behavior change for this patch is to reject any MLS strings
that contain (trailing) garbage if p->mls_enabled is true.
As suggested by Paul Moore, change mls_context_to_sid() so that the two
parts of the range are extracted before the rest of the parsing. Because
now we don't have to scan for two different separators simultaneously
everywhere, we can actually switch to strchr() everywhere instead of the
open-coded loops that scan for two separators at once.
mls_context_to_sid() used to signal how much of the input string was parsed
by updating `*scontext`. However, there is actually no case in which
mls_context_to_sid() only parses a subset of the input and still returns
a success (other than the buggy case with a second '-' in which it
incorrectly claims to have consumed the entire string). Turn `scontext`
into a simple pointer argument and stop redundantly checking whether the
entire input was consumed in string_to_context_struct(). This also lets us
remove the `scontext_len` argument from `string_to_context_struct()`.
Signed-off-by: Jann Horn <jannh@google.com>
[PM: minor merge fuzz in convert_context()]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=10u6
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20180605' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Another reasonable chunk of audit changes for v4.18, thirteen patches
in total.
The thirteen patches can mostly be broken down into one of four
categories: general bug fixes, accessor functions for audit state
stored in the task_struct, negative filter matches on executable
names, and extending the (relatively) new seccomp logging knobs to the
audit subsystem.
The main driver for the accessor functions from Richard are the
changes we're working on to associate audit events with containers,
but I think they have some standalone value too so I figured it would
be good to get them in now.
The seccomp/audit patches from Tyler apply the seccomp logging
improvements from a few releases ago to audit's seccomp logging;
starting with this patchset the changes in
/proc/sys/kernel/seccomp/actions_logged should apply to both the
standard kernel logging and audit.
As usual, everything passes the audit-testsuite and it happens to
merge cleanly with your tree"
[ Heh, except it had trivial merge conflicts with the SELinux tree that
also came in from Paul - Linus ]
* tag 'audit-pr-20180605' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: Fix wrong task in comparison of session ID
audit: use existing session info function
audit: normalize loginuid read access
audit: use new audit_context access funciton for seccomp_actions_logged
audit: use inline function to set audit context
audit: use inline function to get audit context
audit: convert sessionid unset to a macro
seccomp: Don't special case audited processes when logging
seccomp: Audit attempts to modify the actions_logged sysctl
seccomp: Configurable separator for the actions_logged string
seccomp: Separate read and write code for actions_logged sysctl
audit: allow not equal op for audit by executable
audit: add syscall information to FEATURE_CHANGE records
Call trace:
[<ffffff9203a8d7a8>] dump_backtrace+0x0/0x428
[<ffffff9203a8dbf8>] show_stack+0x28/0x38
[<ffffff920409bfb8>] dump_stack+0xd4/0x124
[<ffffff9203d187e8>] print_address_description+0x68/0x258
[<ffffff9203d18c00>] kasan_report.part.2+0x228/0x2f0
[<ffffff9203d1927c>] kasan_report+0x5c/0x70
[<ffffff9203d1776c>] check_memory_region+0x12c/0x1c0
[<ffffff9203d17cdc>] memcpy+0x34/0x68
[<ffffff9203d75348>] xattr_getsecurity+0xe0/0x160
[<ffffff9203d75490>] vfs_getxattr+0xc8/0x120
[<ffffff9203d75d68>] getxattr+0x100/0x2c8
[<ffffff9203d76fb4>] SyS_fgetxattr+0x64/0xa0
[<ffffff9203a83f70>] el0_svc_naked+0x24/0x28
If user get root access and calls security.selinux setxattr() with an
embedded NUL on a file and then if some process performs a getxattr()
on that file with a length greater than the actual length of the string,
it would result in a panic.
To fix this, add the actual length of the string to the security context
instead of the length passed by the userspace process.
Signed-off-by: Sachin Grover <sgrover@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <paul@paul-moore.com>
Recognizing that the audit context is an internal audit value, use an
access function to retrieve the audit context pointer for the task
rather than reaching directly into the task struct to get it.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: merge fuzz in auditsc.c and selinuxfs.c, checkpatch.pl fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Wrap the AVC state within the selinux_state structure and
pass it explicitly to all AVC functions. The AVC private state
is encapsulated in a selinux_avc structure that is referenced
from the selinux_state.
This change should have no effect on SELinux behavior or
APIs (userspace or LSM).
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
If security_get_bools/classes are called before the selinux state is
initialized (i.e. before first policy load), then they should just
return immediately with no booleans/classes.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Define a selinux state structure (struct selinux_state) for
global SELinux state and pass it explicitly to all security server
functions. The public portion of the structure contains state
that is used throughout the SELinux code, such as the enforcing mode.
The structure also contains a pointer to a selinux_ss structure whose
definition is private to the security server and contains security
server specific state such as the policy database and SID table.
This change should have no effect on SELinux behavior or APIs
(userspace or LSM). It merely wraps SELinux state and passes it
explicitly as needed.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: minor fixups needed due to collisions with the SCTP patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
We can't do anything reasonable in security_bounded_transition() if we
don't have a policy loaded, and in fact we could run into problems
with some of the code inside expecting a policy. Fix these problems
like we do many others in security/selinux/ss/services.c by checking
to see if the policy is loaded (ss_initialized) and returning quickly
if it isn't.
Reported-by: syzbot <syzkaller-bugs@googlegroups.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: James Morris <james.l.morris@oracle.com>
The syzbot/syzkaller automated tests found a problem in
security_context_to_sid_core() during early boot (before we load the
SELinux policy) where we could potentially feed context strings without
NUL terminators into the strcmp() function.
We already guard against this during normal operation (after the SELinux
policy has been loaded) by making a copy of the context strings and
explicitly adding a NUL terminator to the end. The patch extends this
protection to the early boot case (no loaded policy) by moving the context
copy earlier in security_context_to_sid_core().
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Reviewed-By: William Roberts <william.c.roberts@intel.com>
During random test as own device to check slub account,
we found some slack memory from hashtab_node(kmalloc-64).
By using kzalloc(), middle of test result like below:
allocated size 240768
request size 45144
slack size 195624
allocation count 3762
So, we want to use kmem_cache_zalloc() and that
can reduce memory size 52byte(slack size/alloc count) per each struct.
Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Update my email address since epoch.ncsc.mil no longer exists.
MAINTAINERS and CREDITS are already correct.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
As systemd ramps up enabling NNP (NoNewPrivileges) for system services,
it is increasingly breaking SELinux domain transitions for those services
and their descendants. systemd enables NNP not only for services whose
unit files explicitly specify NoNewPrivileges=yes but also for services
whose unit files specify any of the following options in combination with
running without CAP_SYS_ADMIN (e.g. specifying User= or a
CapabilityBoundingSet= without CAP_SYS_ADMIN): SystemCallFilter=,
SystemCallArchitectures=, RestrictAddressFamilies=, RestrictNamespaces=,
PrivateDevices=, ProtectKernelTunables=, ProtectKernelModules=,
MemoryDenyWriteExecute=, or RestrictRealtime= as per the systemd.exec(5)
man page.
The end result is bad for the security of both SELinux-disabled and
SELinux-enabled systems. Packagers have to turn off these
options in the unit files to preserve SELinux domain transitions. For
users who choose to disable SELinux, this means that they miss out on
at least having the systemd-supported protections. For users who keep
SELinux enabled, they may still be missing out on some protections
because it isn't necessarily guaranteed that the SELinux policy for
that service provides the same protections in all cases.
commit 7b0d0b40cd ("selinux: Permit bounded transitions under
NO_NEW_PRIVS or NOSUID.") allowed bounded transitions under NNP in
order to support limited usage for sandboxing programs. However,
defining typebounds for all of the affected service domains
is impractical to implement in policy, since typebounds requires us
to ensure that each domain is allowed everything all of its descendant
domains are allowed, and this has to be repeated for the entire chain
of domain transitions. There is no way to clone all allow rules from
descendants to their ancestors in policy currently, and doing so would
be undesirable even if it were practical, as it requires leaking
permissions to objects and operations into ancestor domains that could
weaken their own security in order to allow them to the descendants
(e.g. if a descendant requires execmem permission, then so do all of
its ancestors; if a descendant requires execute permission to a file,
then so do all of its ancestors; if a descendant requires read to a
symbolic link or temporary file, then so do all of its ancestors...).
SELinux domains are intentionally not hierarchical / bounded in this
manner normally, and making them so would undermine their protections
and least privilege.
We have long had a similar tension with SELinux transitions and nosuid
mounts, albeit not as severe. Users often have had to choose between
retaining nosuid on a mount and allowing SELinux domain transitions on
files within those mounts. This likewise leads to unfortunate tradeoffs
in security.
Decouple NNP/nosuid from SELinux transitions, so that we don't have to
make a choice between them. Introduce a nnp_nosuid_transition policy
capability that enables transitions under NNP/nosuid to be based on
a permission (nnp_transition for NNP; nosuid_transition for nosuid)
between the old and new contexts in addition to the current support
for bounded transitions. Domain transitions can then be allowed in
policy without requiring the parent to be a strict superset of all of
its children.
With this change, systemd unit files can be left unmodified from upstream.
SELinux-disabled and SELinux-enabled users will benefit from retaining any
of the systemd-provided protections. SELinux policy will only need to
be adapted to enable the new policy capability and to allow the
new permissions between domain pairs as appropriate.
NB: Allowing nnp_transition between two contexts opens up the potential
for the old context to subvert the new context by installing seccomp
filters before the execve. Allowing nosuid_transition between two contexts
opens up the potential for a context transition to occur on a file from
an untrusted filesystem (e.g. removable media or remote filesystem). Use
with care.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The allocated size for each ebitmap_node is 192byte by kzalloc().
Then, ebitmap_node size is fixed, so it's possible to use only 144byte
for each object by kmem_cache_zalloc().
It can reduce some dynamic allocation size.
Signed-off-by: Junil Lee <junil0814.lee@lge.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a type for Infiniband ports and an access vector for subnet
management packets. Implement the ib_port_smp hook to check that the
caller has permission to send and receive SMPs on the end port specified
by the device name and port. Add interface to query the SID for a IB
port, which walks the IB_PORT ocontexts to find an entry for the
given name and port.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a type and access vector for PKeys. Implement the ib_pkey_access
hook to check that the caller has permission to access the PKey on the
given subnet prefix. Add an interface to get the PKey SID. Walk the PKey
ocontexts to find an entry for the given subnet prefix and pkey.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Log the state of SELinux policy capabilities when a policy is loaded.
For each policy capability known to the kernel, log the policy capability
name and the value set in the policy. For policy capabilities that are
set in the loaded policy but unknown to the kernel, log the policy
capability index, since this is the only information presently available
in the policy.
Sample output with a policy created with a new capability defined
that is not known to the kernel:
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=0
SELinux: unknown policy capability 5
Resolves: https://github.com/SELinuxProject/selinux-kernel/issues/32
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
'perms' will never be NULL since it isn't a plain pointer but an array
of u32 values.
This fixes the following warning when building with clang:
security/selinux/ss/services.c:158:16: error: address of array
'p_in->perms' will always evaluate to 'true'
[-Werror,-Wpointer-bool-conversion]
while (p_in->perms && p_in->perms[k]) {
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit 1ea0ce4069 ("selinux: allow
changing labels for cgroupfs") broke the Android init program,
which looks up security contexts whenever creating directories
and attempts to assign them via setfscreatecon().
When creating subdirectories in cgroup mounts, this would previously
be ignored since cgroup did not support userspace setting of security
contexts. However, after the commit, SELinux would attempt to honor
the requested context on cgroup directories and fail due to permission
denial. Avoid breaking existing userspace/policy by wrapping this change
with a conditional on a new cgroup_seclabel policy capability. This
preserves existing behavior until/unless a new policy explicitly enables
this capability.
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Extend SELinux to support distinctions among all network address families
implemented by the kernel by defining new socket security classes
and mapping to them. Otherwise, many sockets are mapped to the generic
socket class and are indistinguishable in policy. This has come up
previously with regard to selectively allowing access to bluetooth sockets,
and more recently with regard to selectively allowing access to AF_ALG
sockets. Guido Trentalancia submitted a patch that took a similar approach
to add only support for distinguishing AF_ALG sockets, but this generalizes
his approach to handle all address families implemented by the kernel.
Socket security classes are also added for ICMP and SCTP sockets.
Socket security classes were not defined for AF_* values that are reserved
but unimplemented in the kernel, e.g. AF_NETBEUI, AF_SECURITY, AF_ASH,
AF_ECONET, AF_SNA, AF_WANPIPE.
Backward compatibility is provided by only enabling the finer-grained
socket classes if a new policy capability is set in the policy; older
policies will behave as before. The legacy redhat1 policy capability
that was only ever used in testing within Fedora for ptrace_child
is reclaimed for this purpose; as far as I can tell, this policy
capability is not enabled in any supported distro policy.
Add a pair of conditional compilation guards to detect when new AF_* values
are added so that we can update SELinux accordingly rather than having to
belatedly update it long after new address families are introduced.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The current bounds checking of both source and target types
requires allowing any domain that has access to the child
domain to also have the same permissions to the parent, which
is undesirable. Drop the target bounds checking.
KaiGai Kohei originally removed all use of target bounds in
commit 7d52a155e3 ("selinux: remove dead code in
type_attribute_bounds_av()") but this was reverted in
commit 2ae3ba3938 ("selinux: libsepol: remove dead code in
check_avtab_hierarchy_callback()") because it would have
required explicitly allowing the parent any permissions
to the child that the child is allowed to itself.
This change in contrast retains the logic for the case where both
source and target types are bounded, thereby allowing access
if the parent of the source is allowed the corresponding
permissions to the parent of the target. Further, this change
reworks the logic such that we only perform a single computation
for each case and there is no ambiguity as to how to resolve
a bounds violation.
Under the new logic, if the source type and target types are both
bounded, then the parent of the source type must be allowed the same
permissions to the parent of the target type. If only the source
type is bounded, then the parent of the source type must be allowed
the same permissions to the target type.
Examples of the new logic and comparisons with the old logic:
1. If we have:
typebounds A B;
then:
allow B self:process <permissions>;
will satisfy the bounds constraint iff:
allow A self:process <permissions>;
is also allowed in policy.
Under the old logic, the allow rule on B satisfies the
bounds constraint if any of the following three are allowed:
allow A B:process <permissions>; or
allow B A:process <permissions>; or
allow A self:process <permissions>;
However, either of the first two ultimately require the third to
satisfy the bounds constraint under the old logic, and therefore
this degenerates to the same result (but is more efficient - we only
need to perform one compute_av call).
2. If we have:
typebounds A B;
typebounds A_exec B_exec;
then:
allow B B_exec:file <permissions>;
will satisfy the bounds constraint iff:
allow A A_exec:file <permissions>;
is also allowed in policy.
This is essentially the same as #1; it is merely included as
an example of dealing with object types related to a bounded domain
in a manner that satisfies the bounds relationship. Note that
this approach is preferable to leaving B_exec unbounded and having:
allow A B_exec:file <permissions>;
in policy because that would allow B's entrypoints to be used to
enter A. Similarly for _tmp or other related types.
3. If we have:
typebounds A B;
and an unbounded type T, then:
allow B T:file <permissions>;
will satisfy the bounds constraint iff:
allow A T:file <permissions>;
is allowed in policy.
The old logic would have been identical for this example.
4. If we have:
typebounds A B;
and an unbounded domain D, then:
allow D B:unix_stream_socket <permissions>;
is not subject to any bounds constraints under the new logic
because D is not bounded. This is desirable so that we can
allow a domain to e.g. connectto a child domain without having
to allow it to do the same to its parent.
The old logic would have required:
allow D A:unix_stream_socket <permissions>;
to also be allowed in policy.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: re-wrapped description to appease checkpatch.pl]
Signed-off-by: Paul Moore <paul@paul-moore.com>
security_get_bool_value(int bool) argument "bool" conflicts with
in-kernel macros such as BUILD_BUG(). This patch changes this to
index which isn't a type.
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Eric Paris <eparis@parisplace.org>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: selinux@tycho.nsa.gov
Cc: Eric Paris <eparis@redhat.com>
Cc: Paul Moore <pmoore@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
[PM: wrapped description for checkpatch.pl, use "selinux:..." as subj]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Make validatetrans decisions available through selinuxfs.
"/validatetrans" is added to selinuxfs for this purpose.
This functionality is needed by file system servers
implemented in userspace or kernelspace without the VFS
layer.
Writing "$oldcontext $newcontext $tclass $taskcontext"
to /validatetrans is expected to return 0 if the transition
is allowed and -EPERM otherwise.
Signed-off-by: Andrew Perepechko <anserper@ya.ru>
CC: andrew.perepechko@seagate.com
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
sprintf returns the number of characters printed (excluding '\0'), so
we can use that and avoid duplicating the length computation.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
This is much simpler.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
There seems to be a little confusion as to whether the scontext_len
parameter of security_context_to_sid() includes the nul-byte or
not. Reading security_context_to_sid_core(), it seems that the
expectation is that it does not (both the string copying and the test
for scontext_len being zero hint at that).
Introduce the helper security_context_str_to_sid() to do the strlen()
call and fix all callers.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Add extended permissions logic to selinux. Extended permissions
provides additional permissions in 256 bit increments. Extend the
generic ioctl permission check to use the extended permissions for
per-command filtering. Source/target/class sets including the ioctl
permission may additionally include a set of commands. Example:
allowxperm <source> <target>:<class> ioctl unpriv_app_socket_cmds
auditallowxperm <source> <target>:<class> ioctl priv_gpu_cmds
Where unpriv_app_socket_cmds and priv_gpu_cmds are macros
representing commonly granted sets of ioctl commands.
When ioctl commands are omitted only the permissions are checked.
This feature is intended to provide finer granularity for the ioctl
permission that may be too imprecise. For example, the same driver
may use ioctls to provide important and benign functionality such as
driver version or socket type as well as dangerous capabilities such
as debugging features, read/write/execute to physical memory or
access to sensitive data. Per-command filtering provides a mechanism
to reduce the attack surface of the kernel, and limit applications
to the subset of commands required.
The format of the policy binary has been modified to include ioctl
commands, and the policy version number has been incremented to
POLICYDB_VERSION_XPERMS_IOCTL=30 to account for the format
change.
The extended permissions logic is deliberately generic to allow
components to be reused e.g. netlink filters
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Acked-by: Nick Kralevich <nnk@google.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Move the NetLabel secattr MLS category import logic into
mls_import_netlbl_cat() where it belongs, and use the
mls_import_netlbl_cat() function in security_netlbl_secattr_to_sid().
Reported-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Restructure to keyword=value pairs without spaces. Drop superfluous words in
text. Make invalid_context a keyword. Change result= keyword to seresult=.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[Minor rewrite to the patch subject line]
Signed-off-by: Paul Moore <pmoore@redhat.com>
With the introduction of fair queued rwlock, recursive read_lock()
may hang the offending process if there is a write_lock() somewhere
in between.
With recursive read_lock checking enabled, the following error was
reported:
=============================================
[ INFO: possible recursive locking detected ]
3.16.0-rc1 #2 Tainted: G E
---------------------------------------------
load_policy/708 is trying to acquire lock:
(policy_rwlock){.+.+..}, at: [<ffffffff8125b32a>]
security_genfs_sid+0x3a/0x170
but task is already holding lock:
(policy_rwlock){.+.+..}, at: [<ffffffff8125b48c>]
security_fs_use+0x2c/0x110
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(policy_rwlock);
lock(policy_rwlock);
This patch fixes the occurrence of recursive read_lock() of
policy_rwlock by adding a helper function __security_genfs_sid()
which requires caller to take the lock before calling it. The
security_fs_use() was then modified to call the new helper function.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
security_xfrm_policy_alloc can be called in atomic context so the
allocation should be done with GFP_ATOMIC. Add an argument to let the
callers choose the appropriate way. In order to do so a gfp argument
needs to be added to the method xfrm_policy_alloc_security in struct
security_operations and to the internal function
selinux_xfrm_alloc_user. After that switch to GFP_ATOMIC in the atomic
callers and leave GFP_KERNEL as before for the rest.
The path that needed the gfp argument addition is:
security_xfrm_policy_alloc -> security_ops.xfrm_policy_alloc_security ->
all users of xfrm_policy_alloc_security (e.g. selinux_xfrm_policy_alloc) ->
selinux_xfrm_alloc_user (here the allocation used to be GFP_KERNEL only)
Now adding a gfp argument to selinux_xfrm_alloc_user requires us to also
add it to security_context_to_sid which is used inside and prior to this
patch did only GFP_KERNEL allocation. So add gfp argument to
security_context_to_sid and adjust all of its callers as well.
CC: Paul Moore <paul@paul-moore.com>
CC: Dave Jones <davej@redhat.com>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Fan Du <fan.du@windriver.com>
CC: David S. Miller <davem@davemloft.net>
CC: LSM list <linux-security-module@vger.kernel.org>
CC: SELinux list <selinux@tycho.nsa.gov>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Setting an empty security context (length=0) on a file will
lead to incorrectly dereferencing the type and other fields
of the security context structure, yielding a kernel BUG.
As a zero-length security context is never valid, just reject
all such security contexts whether coming from userspace
via setxattr or coming from the filesystem upon a getxattr
request by SELinux.
Setting a security context value (empty or otherwise) unknown to
SELinux in the first place is only possible for a root process
(CAP_MAC_ADMIN), and, if running SELinux in enforcing mode, only
if the corresponding SELinux mac_admin permission is also granted
to the domain by policy. In Fedora policies, this is only allowed for
specific domains such as livecd for setting down security contexts
that are not defined in the build host policy.
Reproducer:
su
setenforce 0
touch foo
setfattr -n security.selinux foo
Caveat:
Relabeling or removing foo after doing the above may not be possible
without booting with SELinux disabled. Any subsequent access to foo
after doing the above will also trigger the BUG.
BUG output from Matthew Thode:
[ 473.893141] ------------[ cut here ]------------
[ 473.962110] kernel BUG at security/selinux/ss/services.c:654!
[ 473.995314] invalid opcode: 0000 [#6] SMP
[ 474.027196] Modules linked in:
[ 474.058118] CPU: 0 PID: 8138 Comm: ls Tainted: G D I
3.13.0-grsec #1
[ 474.116637] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0
07/29/10
[ 474.149768] task: ffff8805f50cd010 ti: ffff8805f50cd488 task.ti:
ffff8805f50cd488
[ 474.183707] RIP: 0010:[<ffffffff814681c7>] [<ffffffff814681c7>]
context_struct_compute_av+0xce/0x308
[ 474.219954] RSP: 0018:ffff8805c0ac3c38 EFLAGS: 00010246
[ 474.252253] RAX: 0000000000000000 RBX: ffff8805c0ac3d94 RCX:
0000000000000100
[ 474.287018] RDX: ffff8805e8aac000 RSI: 00000000ffffffff RDI:
ffff8805e8aaa000
[ 474.321199] RBP: ffff8805c0ac3cb8 R08: 0000000000000010 R09:
0000000000000006
[ 474.357446] R10: 0000000000000000 R11: ffff8805c567a000 R12:
0000000000000006
[ 474.419191] R13: ffff8805c2b74e88 R14: 00000000000001da R15:
0000000000000000
[ 474.453816] FS: 00007f2e75220800(0000) GS:ffff88061fc00000(0000)
knlGS:0000000000000000
[ 474.489254] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 474.522215] CR2: 00007f2e74716090 CR3: 00000005c085e000 CR4:
00000000000207f0
[ 474.556058] Stack:
[ 474.584325] ffff8805c0ac3c98 ffffffff811b549b ffff8805c0ac3c98
ffff8805f1190a40
[ 474.618913] ffff8805a6202f08 ffff8805c2b74e88 00068800d0464990
ffff8805e8aac860
[ 474.653955] ffff8805c0ac3cb8 000700068113833a ffff880606c75060
ffff8805c0ac3d94
[ 474.690461] Call Trace:
[ 474.723779] [<ffffffff811b549b>] ? lookup_fast+0x1cd/0x22a
[ 474.778049] [<ffffffff81468824>] security_compute_av+0xf4/0x20b
[ 474.811398] [<ffffffff8196f419>] avc_compute_av+0x2a/0x179
[ 474.843813] [<ffffffff8145727b>] avc_has_perm+0x45/0xf4
[ 474.875694] [<ffffffff81457d0e>] inode_has_perm+0x2a/0x31
[ 474.907370] [<ffffffff81457e76>] selinux_inode_getattr+0x3c/0x3e
[ 474.938726] [<ffffffff81455cf6>] security_inode_getattr+0x1b/0x22
[ 474.970036] [<ffffffff811b057d>] vfs_getattr+0x19/0x2d
[ 475.000618] [<ffffffff811b05e5>] vfs_fstatat+0x54/0x91
[ 475.030402] [<ffffffff811b063b>] vfs_lstat+0x19/0x1b
[ 475.061097] [<ffffffff811b077e>] SyS_newlstat+0x15/0x30
[ 475.094595] [<ffffffff8113c5c1>] ? __audit_syscall_entry+0xa1/0xc3
[ 475.148405] [<ffffffff8197791e>] system_call_fastpath+0x16/0x1b
[ 475.179201] Code: 00 48 85 c0 48 89 45 b8 75 02 0f 0b 48 8b 45 a0 48
8b 3d 45 d0 b6 00 8b 40 08 89 c6 ff ce e8 d1 b0 06 00 48 85 c0 49 89 c7
75 02 <0f> 0b 48 8b 45 b8 4c 8b 28 eb 1e 49 8d 7d 08 be 80 01 00 00 e8
[ 475.255884] RIP [<ffffffff814681c7>]
context_struct_compute_av+0xce/0x308
[ 475.296120] RSP <ffff8805c0ac3c38>
[ 475.328734] ---[ end trace f076482e9d754adc ]---
Reported-by: Matthew Thode <mthode@mthode.org>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Pull audit update from Eric Paris:
"Again we stayed pretty well contained inside the audit system.
Venturing out was fixing a couple of function prototypes which were
inconsistent (didn't hurt anything, but we used the same value as an
int, uint, u32, and I think even a long in a couple of places).
We also made a couple of minor changes to when a couple of LSMs called
the audit system. We hoped to add aarch64 audit support this go
round, but it wasn't ready.
I'm disappearing on vacation on Thursday. I should have internet
access, but it'll be spotty. If anything goes wrong please be sure to
cc rgb@redhat.com. He'll make fixing things his top priority"
* git://git.infradead.org/users/eparis/audit: (50 commits)
audit: whitespace fix in kernel-parameters.txt
audit: fix location of __net_initdata for audit_net_ops
audit: remove pr_info for every network namespace
audit: Modify a set of system calls in audit class definitions
audit: Convert int limit uses to u32
audit: Use more current logging style
audit: Use hex_byte_pack_upper
audit: correct a type mismatch in audit_syscall_exit()
audit: reorder AUDIT_TTY_SET arguments
audit: rework AUDIT_TTY_SET to only grab spin_lock once
audit: remove needless switch in AUDIT_SET
audit: use define's for audit version
audit: documentation of audit= kernel parameter
audit: wait_for_auditd rework for readability
audit: update MAINTAINERS
audit: log task info on feature change
audit: fix incorrect set of audit_sock
audit: print error message when fail to create audit socket
audit: fix dangling keywords in audit_log_set_loginuid() output
audit: log on errors from filter user rules
...
Two of the conditions in selinux_audit_rule_match() should never happen and
the third indicates a race that should be retried. Remove the calls to
audit_log() (which call audit_log_start()) and deal with the errors in the
caller, logging only once if the condition is met. Calling audit_log_start()
in this location makes buffer allocation and locking more complicated in the
calling tree (audit_filter_user()).
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Revert "selinux: consider filesystem subtype in policies"
This reverts commit 102aefdda4.
Explanation from Eric Paris:
SELinux policy can specify if it should use a filesystem's
xattrs or not. In current policy we have a specification that
fuse should not use xattrs but fuse.glusterfs should use
xattrs. This patch has a bug in which non-glusterfs
filesystems would match the rule saying fuse.glusterfs should
use xattrs. If both fuse and the particular filesystem in
question are not written to handle xattr calls during the mount
command, they will deadlock.
I have fixed the bug to do proper matching, however I believe a
revert is still the correct solution. The reason I believe
that is because the code still does not work. The s_subtype is
not set until after the SELinux hook which attempts to match on
the ".gluster" portion of the rule. So we cannot match on the
rule in question. The code is useless.
Signed-off-by: Paul Moore <pmoore@redhat.com>
