mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 15:35:06 +07:00
f70de8d2ca
14002 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Johannes Weiner
|
869712fd3d |
mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges
While upgrading from 4.16 to 5.2, we noticed these allocation errors in
the log of the new kernel:
SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
cache: tw_sock_TCPv6(960:helper-logs), object size: 232, buffer size: 240, default order: 1, min order: 0
node 0: slabs: 5, objs: 170, free: 0
slab_out_of_memory+1
___slab_alloc+969
__slab_alloc+14
kmem_cache_alloc+346
inet_twsk_alloc+60
tcp_time_wait+46
tcp_fin+206
tcp_data_queue+2034
tcp_rcv_state_process+784
tcp_v6_do_rcv+405
__release_sock+118
tcp_close+385
inet_release+46
__sock_release+55
sock_close+17
__fput+170
task_work_run+127
exit_to_usermode_loop+191
do_syscall_64+212
entry_SYSCALL_64_after_hwframe+68
accompanied by an increase in machines going completely radio silent
under memory pressure.
One thing that changed since 4.16 is
|
||
|
David Hildenbrand
|
656d571193 |
mm/memory_hotplug: fix updating the node span
We recently started updating the node span based on the zone span to
avoid touching uninitialized memmaps.
Currently, we will always detect the node span to start at 0, meaning a
node can easily span too many pages. pgdat_is_empty() will still work
correctly if all zones span no pages. We should skip over all zones
without spanned pages and properly handle the first detected zone that
spans pages.
Unfortunately, in contrast to the zone span (/proc/zoneinfo), the node
span cannot easily be inspected and tested. The node span gives no real
guarantees when an architecture supports memory hotplug, meaning it can
easily contain holes or span pages of different nodes.
The node span is not really used after init on architectures that
support memory hotplug.
E.g., we use it in mm/memory_hotplug.c:try_offline_node() and in
mm/kmemleak.c:kmemleak_scan(). These users seem to be fine.
Link: http://lkml.kernel.org/r/20191027222714.5313-1-david@redhat.com
Fixes:
|
||
|
Roman Gushchin
|
221ec5c0a4 |
mm: slab: make page_cgroup_ino() to recognize non-compound slab pages properly
page_cgroup_ino() doesn't return a valid memcg pointer for non-compound
slab pages, because it depends on PgHead AND PgSlab flags to be set to
determine the memory cgroup from the kmem_cache. It's correct for
compound pages, but not for generic small pages. Those don't have PgHead
set, so it ends up returning zero.
Fix this by replacing the condition to PageSlab() && !PageTail().
Before this patch:
[root@localhost ~]# ./page-types -c /sys/fs/cgroup/user.slice/user-0.slice/user@0.service/ | grep slab
0x0000000000000080 38 0 _______S___________________________________ slab
After this patch:
[root@localhost ~]# ./page-types -c /sys/fs/cgroup/user.slice/user-0.slice/user@0.service/ | grep slab
0x0000000000000080 147 0 _______S___________________________________ slab
Also, hwpoison_filter_task() uses output of page_cgroup_ino() in order
to filter error injection events based on memcg. So if
page_cgroup_ino() fails to return memcg pointer, we just fail to inject
memory error. Considering that hwpoison filter is for testing, affected
users are limited and the impact should be marginal.
[n-horiguchi@ah.jp.nec.com: changelog additions]
Link: http://lkml.kernel.org/r/20191031012151.2722280-1-guro@fb.com
Fixes:
|
||
|
Johannes Weiner
|
1be334e5c0 |
mm/page_alloc.c: ratelimit allocation failure warnings more aggressively
While investigating a bug related to higher atomic allocation failures, we noticed the failure warnings positively drowning the console, and in our case trigger lockup warnings because of a serial console too slow to handle all that output. But even if we had a faster console, it's unclear what additional information the current level of repetition provides. Allocation failures happen for three reasons: The machine is OOM, the VM is failing to handle reasonable requests, or somebody is making unreasonable requests (and didn't acknowledge their opportunism with __GFP_NOWARN). Having the memory dump, a callstack, and the ratelimit stats on skipped failure warnings should provide enough information to let users/admins/developers know whether something is wrong and point them in the right direction for debugging, bpftracing etc. Limit allocation failure warnings to one spew every ten seconds. Link: http://lkml.kernel.org/r/20191028194906.26899-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ville Syrjälä
|
ec649c9d45 |
mm/khugepaged: fix might_sleep() warn with CONFIG_HIGHPTE=y
I got some khugepaged spew on a 32bit x86:
BUG: sleeping function called from invalid context at include/linux/mmu_notifier.h:346
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 25, name: khugepaged
INFO: lockdep is turned off.
CPU: 1 PID: 25 Comm: khugepaged Not tainted 5.4.0-rc5-elk+ #206
Hardware name: System manufacturer P5Q-EM/P5Q-EM, BIOS 2203 07/08/2009
Call Trace:
dump_stack+0x66/0x8e
___might_sleep.cold.96+0x95/0xa6
__might_sleep+0x2e/0x80
collapse_huge_page.isra.51+0x5ac/0x1360
khugepaged+0x9a9/0x20f0
kthread+0xf5/0x110
ret_from_fork+0x2e/0x38
Looks like it's due to CONFIG_HIGHPTE=y pte_offset_map()->kmap_atomic()
vs. mmu_notifier_invalidate_range_start(). Let's do the naive approach
and just reorder the two operations.
Link: http://lkml.kernel.org/r/20191029201513.GG1208@intel.com
Fixes:
|
||
|
Michal Hocko
|
93b3a67448 |
mm, vmstat: reduce zone->lock holding time by /proc/pagetypeinfo
pagetypeinfo_showfree_print is called by zone->lock held in irq mode. This is not really nice because it blocks both any interrupts on that cpu and the page allocator. On large machines this might even trigger the hard lockup detector. Considering the pagetypeinfo is a debugging tool we do not really need exact numbers here. The primary reason to look at the outuput is to see how pageblocks are spread among different migratetypes and low number of pages is much more interesting therefore putting a bound on the number of pages on the free_list sounds like a reasonable tradeoff. The new output will simply tell [...] Node 6, zone Normal, type Movable >100000 >100000 >100000 >100000 41019 31560 23996 10054 3229 983 648 instead of Node 6, zone Normal, type Movable 399568 294127 221558 102119 41019 31560 23996 10054 3229 983 648 The limit has been chosen arbitrary and it is a subject of a future change should there be a need for that. While we are at it, also drop the zone lock after each free_list iteration which will help with the IRQ and page allocator responsiveness even further as the IRQ lock held time is always bound to those 100k pages. [akpm@linux-foundation.org: tweak comment text, per David Hildenbrand] Link: http://lkml.kernel.org/r/20191025072610.18526-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Waiman Long <longman@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Mel Gorman <mgorman@suse.de> Cc: Roman Gushchin <guro@fb.com> Cc: Song Liu <songliubraving@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
abaed0112c |
mm, vmstat: hide /proc/pagetypeinfo from normal users
/proc/pagetypeinfo is a debugging tool to examine internal page
allocator state wrt to fragmentation. It is not very useful for any
other use so normal users really do not need to read this file.
Waiman Long has noticed that reading this file can have negative side
effects because zone->lock is necessary for gathering data and that a)
interferes with the page allocator and its users and b) can lead to hard
lockups on large machines which have very long free_list.
Reduce both issues by simply not exporting the file to regular users.
Link: http://lkml.kernel.org/r/20191025072610.18526-2-mhocko@kernel.org
Fixes:
|
||
|
Jason Gunthorpe
|
df2ec7641b |
mm/mmu_notifiers: use the right return code for WARN_ON
The return code from the op callback is actually in _ret, while the
WARN_ON was checking ret which causes it to misfire.
Link: http://lkml.kernel.org/r/20191025175502.GA31127@ziepe.ca
Fixes:
|
||
|
Mel Gorman
|
3e8fc0075e |
mm, meminit: recalculate pcpu batch and high limits after init completes
Deferred memory initialisation updates zone->managed_pages during the
initialisation phase but before that finishes, the per-cpu page
allocator (pcpu) calculates the number of pages allocated/freed in
batches as well as the maximum number of pages allowed on a per-cpu
list. As zone->managed_pages is not up to date yet, the pcpu
initialisation calculates inappropriately low batch and high values.
This increases zone lock contention quite severely in some cases with
the degree of severity depending on how many CPUs share a local zone and
the size of the zone. A private report indicated that kernel build
times were excessive with extremely high system CPU usage. A perf
profile indicated that a large chunk of time was lost on zone->lock
contention.
This patch recalculates the pcpu batch and high values after deferred
initialisation completes for every populated zone in the system. It was
tested on a 2-socket AMD EPYC 2 machine using a kernel compilation
workload -- allmodconfig and all available CPUs.
mmtests configuration: config-workload-kernbench-max Configuration was
modified to build on a fresh XFS partition.
kernbench
5.4.0-rc3 5.4.0-rc3
vanilla resetpcpu-v2
Amean user-256 13249.50 ( 0.00%) 16401.31 * -23.79%*
Amean syst-256 14760.30 ( 0.00%) 4448.39 * 69.86%*
Amean elsp-256 162.42 ( 0.00%) 119.13 * 26.65%*
Stddev user-256 42.97 ( 0.00%) 19.15 ( 55.43%)
Stddev syst-256 336.87 ( 0.00%) 6.71 ( 98.01%)
Stddev elsp-256 2.46 ( 0.00%) 0.39 ( 84.03%)
5.4.0-rc3 5.4.0-rc3
vanilla resetpcpu-v2
Duration User 39766.24 49221.79
Duration System 44298.10 13361.67
Duration Elapsed 519.11 388.87
The patch reduces system CPU usage by 69.86% and total build time by
26.65%. The variance of system CPU usage is also much reduced.
Before, this was the breakdown of batch and high values over all zones
was:
256 batch: 1
256 batch: 63
512 batch: 7
256 high: 0
256 high: 378
512 high: 42
512 pcpu pagesets had a batch limit of 7 and a high limit of 42. After
the patch:
256 batch: 1
768 batch: 63
256 high: 0
768 high: 378
[mgorman@techsingularity.net: fix merge/linkage snafu]
Link: http://lkml.kernel.org/r/20191023084705.GD3016@techsingularity.netLink: http://lkml.kernel.org/r/20191021094808.28824-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org> [4.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Shakeel Butt
|
7961eee397 |
mm: memcontrol: fix NULL-ptr deref in percpu stats flush
__mem_cgroup_free() can be called on the failure path in mem_cgroup_alloc(). However memcg_flush_percpu_vmstats() and memcg_flush_percpu_vmevents() which are called from __mem_cgroup_free() access the fields of memcg which can potentially be null if called from failure path from mem_cgroup_alloc(). Indeed syzbot has reported the following crash: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 30393 Comm: syz-executor.1 Not tainted 5.4.0-rc2+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:memcg_flush_percpu_vmstats+0x4ae/0x930 mm/memcontrol.c:3436 Code: 05 41 89 c0 41 0f b6 04 24 41 38 c7 7c 08 84 c0 0f 85 5d 03 00 00 44 3b 05 33 d5 12 08 0f 83 e2 00 00 00 4c 89 f0 48 c1 e8 03 <42> 80 3c 28 00 0f 85 91 03 00 00 48 8b 85 10 fe ff ff 48 8b b0 90 RSP: 0018:ffff888095c27980 EFLAGS: 00010206 RAX: 0000000000000012 RBX: ffff888095c27b28 RCX: ffffc90008192000 RDX: 0000000000040000 RSI: ffffffff8340fae7 RDI: 0000000000000007 RBP: ffff888095c27be0 R08: 0000000000000000 R09: ffffed1013f0da33 R10: ffffed1013f0da32 R11: ffff88809f86d197 R12: fffffbfff138b760 R13: dffffc0000000000 R14: 0000000000000090 R15: 0000000000000007 FS: 00007f5027170700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000710158 CR3: 00000000a7b18000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mem_cgroup_free+0x1a/0x190 mm/memcontrol.c:5021 mem_cgroup_free mm/memcontrol.c:5033 [inline] mem_cgroup_css_alloc+0x3a1/0x1ae0 mm/memcontrol.c:5160 css_create kernel/cgroup/cgroup.c:5156 [inline] cgroup_apply_control_enable+0x44d/0xc40 kernel/cgroup/cgroup.c:3119 cgroup_mkdir+0x899/0x11b0 kernel/cgroup/cgroup.c:5401 kernfs_iop_mkdir+0x14d/0x1d0 fs/kernfs/dir.c:1124 vfs_mkdir+0x42e/0x670 fs/namei.c:3807 do_mkdirat+0x234/0x2a0 fs/namei.c:3830 __do_sys_mkdir fs/namei.c:3846 [inline] __se_sys_mkdir fs/namei.c:3844 [inline] __x64_sys_mkdir+0x5c/0x80 fs/namei.c:3844 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixing this by moving the flush to mem_cgroup_free as there is no need to flush anything if we see failure in mem_cgroup_alloc(). Link: http://lkml.kernel.org/r/20191018165231.249872-1-shakeelb@google.com Fixes: |
||
|
Kirill A. Shutemov
|
ef18a1ca84 |
mm/thp: allow dropping THP from page cache
Once a THP is added to the page cache, it cannot be dropped via
/proc/sys/vm/drop_caches. Fix this issue with proper handling in
invalidate_mapping_pages().
Link: http://lkml.kernel.org/r/20191017164223.2762148-5-songliubraving@fb.com
Fixes:
|
||
|
William Kucharski
|
906d278d75 |
mm/vmscan.c: support removing arbitrary sized pages from mapping
__remove_mapping() assumes that pages can only be either base pages or
HPAGE_PMD_SIZE. Ask the page what size it is.
Link: http://lkml.kernel.org/r/20191017164223.2762148-4-songliubraving@fb.com
Fixes:
|
||
|
Kirill A. Shutemov
|
06d3eff62d |
mm/thp: fix node page state in split_huge_page_to_list()
Make sure split_huge_page_to_list() handles the state of shmem THP and
file THP properly.
Link: http://lkml.kernel.org/r/20191017164223.2762148-3-songliubraving@fb.com
Fixes:
|
||
|
Ben Dooks (Codethink)
|
a2ae8c0551 |
mm/init-mm.c: include <linux/mman.h> for vm_committed_as_batch
mm_init.c needs to include <linux/mman.h> for the definition of vm_committed_as_batch. Fixes the following sparse warning: mm/mm_init.c:141:5: warning: symbol 'vm_committed_as_batch' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20191016091509.26708-1-ben.dooks@codethink.co.uk Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ben Dooks
|
d0e6a5821c |
mm/filemap.c: include <linux/ramfs.h> for generic_file_vm_ops definition
The generic_file_vm_ops is defined in <linux/ramfs.h> so include it to fix the following warning: mm/filemap.c:2717:35: warning: symbol 'generic_file_vm_ops' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20191008102311.25432-1-ben.dooks@codethink.co.uk Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ben Dooks
|
444f84fd2a |
mm: include <linux/huge_mm.h> for is_vma_temporary_stack
Include <linux/huge_mm.h> for the definition of is_vma_temporary_stack to fix the following sparse warning: mm/rmap.c:1673:6: warning: symbol 'is_vma_temporary_stack' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20191009151155.27763-1-ben.dooks@codethink.co.uk Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Konstantin Khlebnikov
|
ae8af4388d |
mm/memcontrol: update lruvec counters in mem_cgroup_move_account
Mapped, dirty and writeback pages are also counted in per-lruvec stats.
These counters needs update when page is moved between cgroups.
Currently is nobody *consuming* the lruvec versions of these counters and
that there is no user-visible effect.
Link: http://lkml.kernel.org/r/157112699975.7360.1062614888388489788.stgit@buzz
Fixes:
|
||
|
David Hildenbrand
|
f231fe4235 |
hugetlbfs: don't access uninitialized memmaps in pfn_range_valid_gigantic()
Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched. Let's make sure that we only consider online memory (managed by the buddy) that has initialized memmaps. ZONE_DEVICE is not applicable. page_zone() will call page_to_nid(), which will trigger VM_BUG_ON_PGFLAGS(PagePoisoned(page), page) with CONFIG_PAGE_POISONING and CONFIG_DEBUG_VM_PGFLAGS when called on uninitialized memmaps. This can be the case when an offline memory block (e.g., never onlined) is spanned by a zone. Note: As explained by Michal in [1], alloc_contig_range() will verify the range. So it boils down to the wrong access in this function. [1] http://lkml.kernel.org/r/20180423000943.GO17484@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20191015120717.4858-1-david@redhat.com Fixes: |
||
|
Mike Rapoport
|
f3057ad767 |
mm: memblock: do not enforce current limit for memblock_phys* family
Until commit |
||
|
Honglei Wang
|
b11edebbc9 |
mm: memcg: get number of pages on the LRU list in memcgroup base on lru_zone_size
Commit |
||
|
John Hubbard
|
0cd22afdce |
mm/gup: fix a misnamed "write" argument, and a related bug
In several routines, the "flags" argument is incorrectly named "write".
Change it to "flags".
Also, in one place, the misnaming led to an actual bug:
"flags & FOLL_WRITE" is required, rather than just "flags".
(That problem was flagged by krobot, in v1 of this patch.)
Also, change the flags argument from int, to unsigned int.
You can see that this was a simple oversight, because the
calling code passes "flags" to the fifth argument:
gup_pgd_range():
...
if (!gup_huge_pd(__hugepd(pgd_val(pgd)), addr,
PGDIR_SHIFT, next, flags, pages, nr))
...which, until this patch, the callees referred to as "write".
Also, change two lines to avoid checkpatch line length
complaints, and another line to fix another oversight
that checkpatch called out: missing "int" on pdshift.
Link: http://lkml.kernel.org/r/20191014184639.1512873-3-jhubbard@nvidia.com
Fixes:
|
||
|
Roman Gushchin
|
b749ecfaf6 |
mm: memcg/slab: fix panic in __free_slab() caused by premature memcg pointer release
Karsten reported the following panic in __free_slab() happening on a s390x
machine:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000483
Fault in home space mode while using kernel ASCE.
AS:00000000017d4007 R3:000000007fbd0007 S:000000007fbff000 P:000000000000003d
Oops: 0004 ilc:3 Ý#1¨ PREEMPT SMP
Modules linked in: tcp_diag inet_diag xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_at nf_nat
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-05872-g6133e3e4bada-dirty #14
Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
Krnl PSW : 0704d00180000000 00000000003cadb6 (__free_slab+0x686/0x6b0)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: 00000000f3a32928 0000000000000000 000000007fbf5d00 000000000117c4b8
0000000000000000 000000009e3291c1 0000000000000000 0000000000000000
0000000000000003 0000000000000008 000000002b478b00 000003d080a97600
0000000000000003 0000000000000008 000000002b478b00 000003d080a97600
000000000117ba00 000003e000057db0 00000000003cabcc 000003e000057c78
Krnl Code: 00000000003cada6: e310a1400004 lg %r1,320(%r10)
00000000003cadac: c0e50046c286 brasl %r14,ca32b8
#00000000003cadb2: a7f4fe36 brc 15,3caa1e
>00000000003cadb6: e32060800024 stg %r2,128(%r6)
00000000003cadbc: a7f4fd9e brc 15,3ca8f8
00000000003cadc0: c0e50046790c brasl %r14,c99fd8
00000000003cadc6: a7f4fe2c brc 15,3caa
00000000003cadc6: a7f4fe2c brc 15,3caa1e
00000000003cadca: ecb1ffff00d9 aghik %r11,%r1,-1
Call Trace:
(<00000000003cabcc> __free_slab+0x49c/0x6b0)
<00000000001f5886> rcu_core+0x5a6/0x7e0
<0000000000ca2dea> __do_softirq+0xf2/0x5c0
<0000000000152644> irq_exit+0x104/0x130
<000000000010d222> do_IRQ+0x9a/0xf0
<0000000000ca2344> ext_int_handler+0x130/0x134
<0000000000103648> enabled_wait+0x58/0x128
(<0000000000103634> enabled_wait+0x44/0x128)
<0000000000103b00> arch_cpu_idle+0x40/0x58
<0000000000ca0544> default_idle_call+0x3c/0x68
<000000000018eaa4> do_idle+0xec/0x1c0
<000000000018ee0e> cpu_startup_entry+0x36/0x40
<000000000122df34> arch_call_rest_init+0x5c/0x88
<0000000000000000> 0x0
INFO: lockdep is turned off.
Last Breaking-Event-Address:
<00000000003ca8f4> __free_slab+0x1c4/0x6b0
Kernel panic - not syncing: Fatal exception in interrupt
The kernel panics on an attempt to dereference the NULL memcg pointer.
When shutdown_cache() is called from the kmem_cache_destroy() context, a
memcg kmem_cache might have empty slab pages in a partial list, which are
still charged to the memory cgroup.
These pages are released by free_partial() at the beginning of
shutdown_cache(): either directly or by scheduling a RCU-delayed work
(if the kmem_cache has the SLAB_TYPESAFE_BY_RCU flag). The latter case
is when the reported panic can happen: memcg_unlink_cache() is called
immediately after shrinking partial lists, without waiting for scheduled
RCU works. It sets the kmem_cache->memcg_params.memcg pointer to NULL,
and the following attempt to dereference it by __free_slab() from the
RCU work context causes the panic.
To fix the issue, let's postpone the release of the memcg pointer to
destroy_memcg_params(). It's called from a separate work context by
slab_caches_to_rcu_destroy_workfn(), which contains a full RCU barrier.
This guarantees that all scheduled page release RCU works will complete
before the memcg pointer will be zeroed.
Big thanks for Karsten for the perfect report containing all necessary
information, his help with the analysis of the problem and testing of the
fix.
Link: http://lkml.kernel.org/r/20191010160549.1584316-1-guro@fb.com
Fixes:
|
||
|
Aneesh Kumar K.V
|
77e080e768 |
mm/memunmap: don't access uninitialized memmap in memunmap_pages()
Patch series "mm/memory_hotplug: Shrink zones before removing memory",
v6.
This series fixes the access of uninitialized memmaps when shrinking
zones/nodes and when removing memory. Also, it contains all fixes for
crashes that can be triggered when removing certain namespace using
memunmap_pages() - ZONE_DEVICE, reported by Aneesh.
We stop trying to shrink ZONE_DEVICE, as it's buggy, fixing it would be
more involved (we don't have SECTION_IS_ONLINE as an indicator), and
shrinking is only of limited use (set_zone_contiguous() cannot detect
the ZONE_DEVICE as contiguous).
We continue shrinking !ZONE_DEVICE zones, however, I reduced the amount
of code to a minimum. Shrinking is especially necessary to keep
zone->contiguous set where possible, especially, on memory unplug of
DIMMs at zone boundaries.
--------------------------------------------------------------------------
Zones are now properly shrunk when offlining memory blocks or when
onlining failed. This allows to properly shrink zones on memory unplug
even if the separate memory blocks of a DIMM were onlined to different
zones or re-onlined to a different zone after offlining.
Example:
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 0
present 0
managed 0
:/# echo "online_movable" > /sys/devices/system/memory/memory41/state
:/# echo "online_movable" > /sys/devices/system/memory/memory43/state
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 98304
present 65536
managed 65536
:/# echo 0 > /sys/devices/system/memory/memory43/online
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 32768
present 32768
managed 32768
:/# echo 0 > /sys/devices/system/memory/memory41/online
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 0
present 0
managed 0
This patch (of 10):
With an altmap, the memmap falling into the reserved altmap space are not
initialized and, therefore, contain a garbage NID and a garbage zone.
Make sure to read the NID/zone from a memmap that was initialized.
This fixes a kernel crash that is observed when destroying a namespace:
kernel BUG at include/linux/mm.h:1107!
cpu 0x1: Vector: 700 (Program Check) at [c000000274087890]
pc: c0000000004b9728: memunmap_pages+0x238/0x340
lr: c0000000004b9724: memunmap_pages+0x234/0x340
...
pid = 3669, comm = ndctl
kernel BUG at include/linux/mm.h:1107!
devm_action_release+0x30/0x50
release_nodes+0x268/0x2d0
device_release_driver_internal+0x174/0x240
unbind_store+0x13c/0x190
drv_attr_store+0x44/0x60
sysfs_kf_write+0x70/0xa0
kernfs_fop_write+0x1ac/0x290
__vfs_write+0x3c/0x70
vfs_write+0xe4/0x200
ksys_write+0x7c/0x140
system_call+0x5c/0x68
The "page_zone(pfn_to_page(pfn)" was introduced by
|
||
|
David Hildenbrand
|
00d6c019b5 |
mm/memory_hotplug: don't access uninitialized memmaps in shrink_pgdat_span()
We might use the nid of memmaps that were never initialized. For example, if the memmap was poisoned, we will crash the kernel in pfn_to_nid() right now. Let's use the calculated boundaries of the separate zones instead. This now also avoids having to iterate over a whole bunch of subsections again, after shrinking one zone. Before commit |
||
|
Qian Cai
|
a26ee565b6 |
mm/page_owner: don't access uninitialized memmaps when reading /proc/pagetypeinfo
Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched. For example, when not onlining a memory block that is spanned by a zone and reading /proc/pagetypeinfo with CONFIG_DEBUG_VM_PGFLAGS and CONFIG_PAGE_POISONING, we can trigger a kernel BUG: :/# echo 1 > /sys/devices/system/memory/memory40/online :/# echo 1 > /sys/devices/system/memory/memory42/online :/# cat /proc/pagetypeinfo > test.file page:fffff2c585200000 is uninitialized and poisoned raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) There is not page extension available. ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:1107! invalid opcode: 0000 [#1] SMP NOPTI Please note that this change does not affect ZONE_DEVICE, because pagetypeinfo_showmixedcount_print() is called from mm/vmstat.c:pagetypeinfo_showmixedcount() only for populated zones, and ZONE_DEVICE is never populated (zone->present_pages always 0). [david@redhat.com: move check to outer loop, add comment, rephrase description] Link: http://lkml.kernel.org/r/20191011140638.8160-1-david@redhat.com Fixes: |
||
|
David Hildenbrand
|
96c804a6ae |
mm/memory-failure.c: don't access uninitialized memmaps in memory_failure()
We should check for pfn_to_online_page() to not access uninitialized memmaps. Reshuffle the code so we don't have to duplicate the error message. Link: http://lkml.kernel.org/r/20191009142435.3975-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Fixes: |
||
|
Jane Chu
|
3d7fed4ad8 |
mm/memory-failure: poison read receives SIGKILL instead of SIGBUS if mmaped more than once
Mmap /dev/dax more than once, then read the poison location using
address from one of the mappings. The other mappings due to not having
the page mapped in will cause SIGKILLs delivered to the process.
SIGKILL succeeds over SIGBUS, so user process loses the opportunity to
handle the UE.
Although one may add MAP_POPULATE to mmap(2) to work around the issue,
MAP_POPULATE makes mapping 128GB of pmem several magnitudes slower, so
isn't always an option.
Details -
ndctl inject-error --block=10 --count=1 namespace6.0
./read_poison -x dax6.0 -o 5120 -m 2
mmaped address 0x7f5bb6600000
mmaped address 0x7f3cf3600000
doing local read at address 0x7f3cf3601400
Killed
Console messages in instrumented kernel -
mce: Uncorrected hardware memory error in user-access at edbe201400
Memory failure: tk->addr = 7f5bb6601000
Memory failure: address edbe201: call dev_pagemap_mapping_shift
dev_pagemap_mapping_shift: page edbe201: no PUD
Memory failure: tk->size_shift == 0
Memory failure: Unable to find user space address edbe201 in read_poison
Memory failure: tk->addr = 7f3cf3601000
Memory failure: address edbe201: call dev_pagemap_mapping_shift
Memory failure: tk->size_shift = 21
Memory failure: 0xedbe201: forcibly killing read_poison:22434 because of failure to unmap corrupted page
=> to deliver SIGKILL
Memory failure: 0xedbe201: Killing read_poison:22434 due to hardware memory corruption
=> to deliver SIGBUS
Link: http://lkml.kernel.org/r/1565112345-28754-3-git-send-email-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Suggested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Randy Dunlap
|
87bf4f71af |
mm/slab.c: fix kernel-doc warning for __ksize()
Fix kernel-doc warning in mm/slab.c:
mm/slab.c:4215: warning: Function parameter or member 'objp' not described in '__ksize'
Also add Return: documentation section for this function.
Link: http://lkml.kernel.org/r/68c9fd7d-f09e-d376-e292-c7b2bdf1774d@infradead.org
Fixes:
|
||
|
Vlastimil Babka
|
a2e9a5afce |
mm, compaction: fix wrong pfn handling in __reset_isolation_pfn()
Florian and Dave reported [1] a NULL pointer dereference in
__reset_isolation_pfn(). While the exact cause is unclear, staring at
the code revealed two bugs, which might be related.
One bug is that if zone starts in the middle of pageblock, block_page
might correspond to different pfn than block_pfn, and then the
pfn_valid_within() checks will check different pfn's than those accessed
via struct page. This might result in acessing an unitialized page in
CONFIG_HOLES_IN_ZONE configs.
The other bug is that end_page refers to the first page of next
pageblock and not last page of current pageblock. The online and valid
check is then wrong and with sections, the while (page < end_page) loop
might wander off actual struct page arrays.
[1] https://lore.kernel.org/linux-xfs/87o8z1fvqu.fsf@mid.deneb.enyo.de/
Link: http://lkml.kernel.org/r/20191008152915.24704-1-vbabka@suse.cz
Fixes:
|
||
|
David Rientjes
|
3f36d86694 |
mm, hugetlb: allow hugepage allocations to reclaim as needed
Commit |
||
|
Alexander Potapenko
|
0f181f9fbe |
mm/slub.c: init_on_free=1 should wipe freelist ptr for bulk allocations
slab_alloc_node() already zeroed out the freelist pointer if
init_on_free was on. Thibaut Sautereau noticed that the same needs to
be done for kmem_cache_alloc_bulk(), which performs the allocations
separately.
kmem_cache_alloc_bulk() is currently used in two places in the kernel,
so this change is unlikely to have a major performance impact.
SLAB doesn't require a similar change, as auto-initialization makes the
allocator store the freelist pointers off-slab.
Link: http://lkml.kernel.org/r/20191007091605.30530-1-glider@google.com
Fixes:
|
||
|
Qian Cai
|
e4f8e513c3 |
mm/slub: fix a deadlock in show_slab_objects()
A long time ago we fixed a similar deadlock in show_slab_objects() [1]. However, it is apparently due to the commits like |
||
|
Vlastimil Babka
|
fdf3bf8091 |
mm, page_owner: rename flag indicating that page is allocated
Commit
|
||
|
Vlastimil Babka
|
0fe9a448a0 |
mm, page_owner: decouple freeing stack trace from debug_pagealloc
Commit
|
||
|
Vlastimil Babka
|
5556cfe8d9 |
mm, page_owner: fix off-by-one error in __set_page_owner_handle()
Patch series "followups to debug_pagealloc improvements through page_owner", v3. These are followups to [1] which made it to Linus meanwhile. Patches 1 and 3 are based on Kirill's review, patch 2 on KASAN request [2]. It would be nice if all of this made it to 5.4 with [1] already there (or at least Patch 1). This patch (of 3): As noted by Kirill, commit |
||
|
Catalin Marinas
|
2abd839aa7 |
kmemleak: Do not corrupt the object_list during clean-up
In case of an error (e.g. memory pool too small), kmemleak disables
itself and cleans up the already allocated metadata objects. However, if
this happens early before the RCU callback mechanism is available,
put_object() skips call_rcu() and frees the object directly. This is not
safe with the RCU list traversal in __kmemleak_do_cleanup().
Change the list traversal in __kmemleak_do_cleanup() to
list_for_each_entry_safe() and remove the rcu_read_{lock,unlock} since
the kmemleak is already disabled at this point. In addition, avoid an
unnecessary metadata object rb-tree look-up since it already has the
struct kmemleak_object pointer.
Fixes:
|
||
|
Linus Torvalds
|
297cbcccc2 |
for-linus-20191010
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl2f5MIQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpvscD/4v8E1s1rt6JwqM0Fa27UjRdhfGnc8ad8vs fD7rf3ZmLkoM1apVopMcAscUH726wU4qbxwEUDEntxxv2wJHuZdSZ64zhFJ17uis uJ2pF4MpK/m6DnHZu/SAU4t9aU+l6SBqX0tS1bFycecPgGRk46jrVX5tNJggt0Fy hqmx3ACWbkGiFDERT2AAQ69WHfmzeI9aUjx3jJY2eLnK7OjjEpyoEBs0j/AHl3ep kydhItU5NSFCv94X7vmZy/dvQ5hE4/1HTFfg79fOZcywQi1AN5DafKxiM2kgaSJ0 jW58i+AFVtUPysNpVsxvjAgqGwDX/UJkOkggPd6V8/6LMfEvBKY4YNXlUEbqTN3Y pqn19/cgdKHaQpHKqwettcQujc71kry/yHsaudD+g2fi0efYi3d4qxIp9XA0TF03 z6jzp8Hfo2SKbwapIFPa7Wqj86ZpbBxtROibCA17WKSNzn0UR3pJmEigo4l364ow nJpvZChLDHZXjovgzISmUnbR+O1yP0+ZnI9b7kgNp0UV4SI5ajf6f2T7667dcQs0 J1GNt4QvqPza3R0z1SuoEi6tbc3GyMj7NZyIseNOXR/NtqXEWtiNvDIuZqs6Wn/T 4GhaF0Mjqc17B3UEkdU1z09HL0JR40vUrGYE4lDxHhPWd0YngDGJJX2pZG2Y0WBp VQ20AzijzQ== =wZnt -----END PGP SIGNATURE----- Merge tag 'for-linus-20191010' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - Fix wbt performance regression introduced with the blk-rq-qos refactoring (Harshad) - Fix io_uring fileset removal inadvertently killing the workqueue (me) - Fix io_uring typo in linked command nonblock submission (Pavel) - Remove spurious io_uring wakeups on request free (Pavel) - Fix null_blk zoned command error return (Keith) - Don't use freezable workqueues for backing_dev, also means we can revert a previous libata hack (Mika) - Fix nbd sysfs mutex dropped too soon at removal time (Xiubo) * tag 'for-linus-20191010' of git://git.kernel.dk/linux-block: nbd: fix possible sysfs duplicate warning null_blk: Fix zoned command return code io_uring: only flush workqueues on fileset removal io_uring: remove wait loop spurious wakeups blk-wbt: fix performance regression in wbt scale_up/scale_down Revert "libata, freezer: avoid block device removal while system is frozen" bdi: Do not use freezable workqueue io_uring: fix reversed nonblock flag for link submission |
||
|
Linus Torvalds
|
015c21ba59 |
Merge branch 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount fixes from Al Viro: "A couple of regressions from the mount series" * 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: add missing blkdev_put() in get_tree_bdev() shmem: fix LSM options parsing |
||
|
Al Viro
|
33f37c6488 |
shmem: fix LSM options parsing
->parse_monolithic() there forgets to call security_sb_eat_lsm_opts() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Vlastimil Babka
|
59bb47985c |
mm, sl[aou]b: guarantee natural alignment for kmalloc(power-of-two)
In most configurations, kmalloc() happens to return naturally aligned (i.e. aligned to the block size itself) blocks for power of two sizes. That means some kmalloc() users might unknowingly rely on that alignment, until stuff breaks when the kernel is built with e.g. CONFIG_SLUB_DEBUG or CONFIG_SLOB, and blocks stop being aligned. Then developers have to devise workaround such as own kmem caches with specified alignment [1], which is not always practical, as recently evidenced in [2]. The topic has been discussed at LSF/MM 2019 [3]. Adding a 'kmalloc_aligned()' variant would not help with code unknowingly relying on the implicit alignment. For slab implementations it would either require creating more kmalloc caches, or allocate a larger size and only give back part of it. That would be wasteful, especially with a generic alignment parameter (in contrast with a fixed alignment to size). Ideally we should provide to mm users what they need without difficult workarounds or own reimplementations, so let's make the kmalloc() alignment to size explicitly guaranteed for power-of-two sizes under all configurations. What this means for the three available allocators? * SLAB object layout happens to be mostly unchanged by the patch. The implicitly provided alignment could be compromised with CONFIG_DEBUG_SLAB due to redzoning, however SLAB disables redzoning for caches with alignment larger than unsigned long long. Practically on at least x86 this includes kmalloc caches as they use cache line alignment, which is larger than that. Still, this patch ensures alignment on all arches and cache sizes. * SLUB layout is also unchanged unless redzoning is enabled through CONFIG_SLUB_DEBUG and boot parameter for the particular kmalloc cache. With this patch, explicit alignment is guaranteed with redzoning as well. This will result in more memory being wasted, but that should be acceptable in a debugging scenario. * SLOB has no implicit alignment so this patch adds it explicitly for kmalloc(). The potential downside is increased fragmentation. While pathological allocation scenarios are certainly possible, in my testing, after booting a x86_64 kernel+userspace with virtme, around 16MB memory was consumed by slab pages both before and after the patch, with difference in the noise. [1] https://lore.kernel.org/linux-btrfs/c3157c8e8e0e7588312b40c853f65c02fe6c957a.1566399731.git.christophe.leroy@c-s.fr/ [2] https://lore.kernel.org/linux-fsdevel/20190225040904.5557-1-ming.lei@redhat.com/ [3] https://lwn.net/Articles/787740/ [akpm@linux-foundation.org: documentation fixlet, per Matthew] Link: http://lkml.kernel.org/r/20190826111627.7505-3-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Cc: David Sterba <dsterba@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: "Darrick J . Wong" <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
6a486c0ad4 |
mm, sl[ou]b: improve memory accounting
Patch series "guarantee natural alignment for kmalloc()", v2. This patch (of 2): SLOB currently doesn't account its pages at all, so in /proc/meminfo the Slab field shows zero. Modifying a counter on page allocation and freeing should be acceptable even for the small system scenarios SLOB is intended for. Since reclaimable caches are not separated in SLOB, account everything as unreclaimable. SLUB currently doesn't account kmalloc() and kmalloc_node() allocations larger than order-1 page, that are passed directly to the page allocator. As they also don't appear in /proc/slabinfo, it might look like a memory leak. For consistency, account them as well. (SLAB doesn't actually use page allocator directly, so no change there). Ideally SLOB and SLUB would be handled in separate patches, but due to the shared kmalloc_order() function and different kfree() implementations, it's easier to patch both at once to prevent inconsistencies. Link: http://lkml.kernel.org/r/20190826111627.7505-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: "Darrick J . Wong" <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Chris Down
|
1bc63fb127 |
mm, memcg: make scan aggression always exclude protection
This patch is an incremental improvement on the existing
memory.{low,min} relative reclaim work to base its scan pressure
calculations on how much protection is available compared to the current
usage, rather than how much the current usage is over some protection
threshold.
This change doesn't change the experience for the user in the normal
case too much. One benefit is that it replaces the (somewhat arbitrary)
100% cutoff with an indefinite slope, which makes it easier to ballpark
a memory.low value.
As well as this, the old methodology doesn't quite apply generically to
machines with varying amounts of physical memory. Let's say we have a
top level cgroup, workload.slice, and another top level cgroup,
system-management.slice. We want to roughly give 12G to
system-management.slice, so on a 32GB machine we set memory.low to 20GB
in workload.slice, and on a 64GB machine we set memory.low to 52GB.
However, because these are relative amounts to the total machine size,
while the amount of memory we want to generally be willing to yield to
system.slice is absolute (12G), we end up putting more pressure on
system.slice just because we have a larger machine and a larger workload
to fill it, which seems fairly unintuitive. With this new behaviour, we
don't end up with this unintended side effect.
Previously the way that memory.low protection works is that if you are
50% over a certain baseline, you get 50% of your normal scan pressure.
This is certainly better than the previous cliff-edge behaviour, but it
can be improved even further by always considering memory under the
currently enforced protection threshold to be out of bounds. This means
that we can set relatively low memory.low thresholds for variable or
bursty workloads while still getting a reasonable level of protection,
whereas with the previous version we may still trivially hit the 100%
clamp. The previous 100% clamp is also somewhat arbitrary, whereas this
one is more concretely based on the currently enforced protection
threshold, which is likely easier to reason about.
There is also a subtle issue with the way that proportional reclaim
worked previously -- it promotes having no memory.low, since it makes
pressure higher during low reclaim. This happens because we base our
scan pressure modulation on how far memory.current is between memory.min
and memory.low, but if memory.low is unset, we only use the overage
method. In most cromulent configurations, this then means that we end
up with *more* pressure than with no memory.low at all when we're in low
reclaim, which is not really very usable or expected.
With this patch, memory.low and memory.min affect reclaim pressure in a
more understandable and composable way. For example, from a user
standpoint, "protected" memory now remains untouchable from a reclaim
aggression standpoint, and users can also have more confidence that
bursty workloads will still receive some amount of guaranteed
protection.
Link: http://lkml.kernel.org/r/20190322160307.GA3316@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Chris Down
|
9de7ca46ad |
mm, memcg: make memory.emin the baseline for utilisation determination
Roman points out that when when we do the low reclaim pass, we scale the reclaim pressure relative to position between 0 and the maximum protection threshold. However, if the maximum protection is based on memory.elow, and memory.emin is above zero, this means we still may get binary behaviour on second-pass low reclaim. This is because we scale starting at 0, not starting at memory.emin, and since we don't scan at all below emin, we end up with cliff behaviour. This should be a fairly uncommon case since usually we don't go into the second pass, but it makes sense to scale our low reclaim pressure starting at emin. You can test this by catting two large sparse files, one in a cgroup with emin set to some moderate size compared to physical RAM, and another cgroup without any emin. In both cgroups, set an elow larger than 50% of physical RAM. The one with emin will have less page scanning, as reclaim pressure is lower. Rebase on top of and apply the same idea as what was applied to handle cgroup_memory=disable properly for the original proportional patch http://lkml.kernel.org/r/20190201045711.GA18302@chrisdown.name ("mm, memcg: Handle cgroup_disable=memory when getting memcg protection"). Link: http://lkml.kernel.org/r/20190201051810.GA18895@chrisdown.name Signed-off-by: Chris Down <chris@chrisdown.name> Suggested-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dennis Zhou <dennis@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Chris Down
|
9783aa9917 |
mm, memcg: proportional memory.{low,min} reclaim
cgroup v2 introduces two memory protection thresholds: memory.low (best-effort) and memory.min (hard protection). While they generally do what they say on the tin, there is a limitation in their implementation that makes them difficult to use effectively: that cliff behaviour often manifests when they become eligible for reclaim. This patch implements more intuitive and usable behaviour, where we gradually mount more reclaim pressure as cgroups further and further exceed their protection thresholds. This cliff edge behaviour happens because we only choose whether or not to reclaim based on whether the memcg is within its protection limits (see the use of mem_cgroup_protected in shrink_node), but we don't vary our reclaim behaviour based on this information. Imagine the following timeline, with the numbers the lruvec size in this zone: 1. memory.low=1000000, memory.current=999999. 0 pages may be scanned. 2. memory.low=1000000, memory.current=1000000. 0 pages may be scanned. 3. memory.low=1000000, memory.current=1000001. 1000001* pages may be scanned. (?!) * Of course, we won't usually scan all available pages in the zone even without this patch because of scan control priority, over-reclaim protection, etc. However, as shown by the tests at the end, these techniques don't sufficiently throttle such an extreme change in input, so cliff-like behaviour isn't really averted by their existence alone. Here's an example of how this plays out in practice. At Facebook, we are trying to protect various workloads from "system" software, like configuration management tools, metric collectors, etc (see this[0] case study). In order to find a suitable memory.low value, we start by determining the expected memory range within which the workload will be comfortable operating. This isn't an exact science -- memory usage deemed "comfortable" will vary over time due to user behaviour, differences in composition of work, etc, etc. As such we need to ballpark memory.low, but doing this is currently problematic: 1. If we end up setting it too low for the workload, it won't have *any* effect (see discussion above). The group will receive the full weight of reclaim and won't have any priority while competing with the less important system software, as if we had no memory.low configured at all. 2. Because of this behaviour, we end up erring on the side of setting it too high, such that the comfort range is reliably covered. However, protected memory is completely unavailable to the rest of the system, so we might cause undue memory and IO pressure there when we *know* we have some elasticity in the workload. 3. Even if we get the value totally right, smack in the middle of the comfort zone, we get extreme jumps between no pressure and full pressure that cause unpredictable pressure spikes in the workload due to the current binary reclaim behaviour. With this patch, we can set it to our ballpark estimation without too much worry. Any undesirable behaviour, such as too much or too little reclaim pressure on the workload or system will be proportional to how far our estimation is off. This means we can set memory.low much more conservatively and thus waste less resources *without* the risk of the workload falling off a cliff if we overshoot. As a more abstract technical description, this unintuitive behaviour results in having to give high-priority workloads a large protection buffer on top of their expected usage to function reliably, as otherwise we have abrupt periods of dramatically increased memory pressure which hamper performance. Having to set these thresholds so high wastes resources and generally works against the principle of work conservation. In addition, having proportional memory reclaim behaviour has other benefits. Most notably, before this patch it's basically mandatory to set memory.low to a higher than desirable value because otherwise as soon as you exceed memory.low, all protection is lost, and all pages are eligible to scan again. By contrast, having a gradual ramp in reclaim pressure means that you now still get some protection when thresholds are exceeded, which means that one can now be more comfortable setting memory.low to lower values without worrying that all protection will be lost. This is important because workingset size is really hard to know exactly, especially with variable workloads, so at least getting *some* protection if your workingset size grows larger than you expect increases user confidence in setting memory.low without a huge buffer on top being needed. Thanks a lot to Johannes Weiner and Tejun Heo for their advice and assistance in thinking about how to make this work better. In testing these changes, I intended to verify that: 1. Changes in page scanning become gradual and proportional instead of binary. To test this, I experimented stepping further and further down memory.low protection on a workload that floats around 19G workingset when under memory.low protection, watching page scan rates for the workload cgroup: +------------+-----------------+--------------------+--------------+ | memory.low | test (pgscan/s) | control (pgscan/s) | % of control | +------------+-----------------+--------------------+--------------+ | 21G | 0 | 0 | N/A | | 17G | 867 | 3799 | 23% | | 12G | 1203 | 3543 | 34% | | 8G | 2534 | 3979 | 64% | | 4G | 3980 | 4147 | 96% | | 0 | 3799 | 3980 | 95% | +------------+-----------------+--------------------+--------------+ As you can see, the test kernel (with a kernel containing this patch) ramps up page scanning significantly more gradually than the control kernel (without this patch). 2. More gradual ramp up in reclaim aggression doesn't result in premature OOMs. To test this, I wrote a script that slowly increments the number of pages held by stress(1)'s --vm-keep mode until a production system entered severe overall memory contention. This script runs in a highly protected slice taking up the majority of available system memory. Watching vmstat revealed that page scanning continued essentially nominally between test and control, without causing forward reclaim progress to become arrested. [0]: https://facebookmicrosites.github.io/cgroup2/docs/overview.html#case-study-the-fbtax2-project [akpm@linux-foundation.org: reflow block comments to fit in 80 cols] [chris@chrisdown.name: handle cgroup_disable=memory when getting memcg protection] Link: http://lkml.kernel.org/r/20190201045711.GA18302@chrisdown.name Link: http://lkml.kernel.org/r/20190124014455.GA6396@chrisdown.name Signed-off-by: Chris Down <chris@chrisdown.name> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Dan Carpenter
|
518a867130 |
mm/vmpressure.c: fix a signedness bug in vmpressure_register_event()
The "mode" and "level" variables are enums and in this context GCC will
treat them as unsigned ints so the error handling is never triggered.
I also removed the bogus initializer because it isn't required any more
and it's sort of confusing.
[akpm@linux-foundation.org: reduce implicit and explicit typecasting]
[akpm@linux-foundation.org: fix return value, add comment, per Matthew]
Link: http://lkml.kernel.org/r/20190925110449.GO3264@mwanda
Fixes:
|
||
|
Qian Cai
|
234fdce892 |
mm/page_alloc.c: fix a crash in free_pages_prepare()
On architectures like s390, arch_free_page() could mark the page unused
(set_page_unused()) and any access later would trigger a kernel panic.
Fix it by moving arch_free_page() after all possible accessing calls.
Hardware name: IBM 2964 N96 400 (z/VM 6.4.0)
Krnl PSW : 0404e00180000000 0000000026c2b96e (__free_pages_ok+0x34e/0x5d8)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000088d43af7 0000000000484000 000000000000007c 000000000000000f
000003d080012100 000003d080013fc0 0000000000000000 0000000000100000
00000000275cca48 0000000000000100 0000000000000008 000003d080010000
00000000000001d0 000003d000000000 0000000026c2b78a 000000002717fdb0
Krnl Code: 0000000026c2b95c: ec1100b30659 risbgn %r1,%r1,0,179,6
0000000026c2b962: e32014000036 pfd 2,1024(%r1)
#0000000026c2b968: d7ff10001000 xc 0(256,%r1),0(%r1)
>0000000026c2b96e: 41101100 la %r1,256(%r1)
0000000026c2b972: a737fff8 brctg %r3,26c2b962
0000000026c2b976: d7ff10001000 xc 0(256,%r1),0(%r1)
0000000026c2b97c: e31003400004 lg %r1,832
0000000026c2b982: ebff1430016a asi 5168(%r1),-1
Call Trace:
__free_pages_ok+0x16a/0x5d8)
memblock_free_all+0x206/0x290
mem_init+0x58/0x120
start_kernel+0x2b0/0x570
startup_continue+0x6a/0xc0
INFO: lockdep is turned off.
Last Breaking-Event-Address:
__free_pages_ok+0x372/0x5d8
Kernel panic - not syncing: Fatal exception: panic_on_oops
00: HCPGIR450W CP entered; disabled wait PSW 00020001 80000000 00000000 26A2379C
In the past, only kernel_poison_pages() would trigger this but it needs
"page_poison=on" kernel cmdline, and I suspect nobody tested that on
s390. Recently, kernel_init_free_pages() (commit
|
||
|
Vitaly Wool
|
5b6807de11 |
mm/z3fold.c: claim page in the beginning of free
There's a really hard to reproduce race in z3fold between z3fold_free() and z3fold_reclaim_page(). z3fold_reclaim_page() can claim the page after z3fold_free() has checked if the page was claimed and z3fold_free() will then schedule this page for compaction which may in turn lead to random page faults (since that page would have been reclaimed by then). Fix that by claiming page in the beginning of z3fold_free() and not forgetting to clear the claim in the end. [vitalywool@gmail.com: v2] Link: http://lkml.kernel.org/r/20190928113456.152742cf@bigdell Link: http://lkml.kernel.org/r/20190926104844.4f0c6efa1366b8f5741eaba9@gmail.com Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Reported-by: Markus Linnala <markus.linnala@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Henry Burns <henrywolfeburns@gmail.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Markus Linnala <markus.linnala@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yi Wang
|
758b8db4a5 |
mm: fix -Wmissing-prototypes warnings
We get two warnings when build kernel W=1: mm/shuffle.c:36:12: warning: no previous prototype for `shuffle_show' [-Wmissing-prototypes] mm/sparse.c:220:6: warning: no previous prototype for `subsection_mask_set' [-Wmissing-prototypes] Make the functions static to fix this. Link: http://lkml.kernel.org/r/1566978161-7293-1-git-send-email-wang.yi59@zte.com.cn Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Anshuman Khandual
|
6d0e984941 |
mm/memremap: drop unused SECTION_SIZE and SECTION_MASK
SECTION_SIZE and SECTION_MASK macros are not getting used anymore. But they do conflict with existing definitions on arm64 platform causing following warning during build. Lets drop these unused macros. mm/memremap.c:16: warning: "SECTION_MASK" redefined #define SECTION_MASK ~((1UL << PA_SECTION_SHIFT) - 1) arch/arm64/include/asm/pgtable-hwdef.h:79: note: this is the location of the previous definition #define SECTION_MASK (~(SECTION_SIZE-1)) mm/memremap.c:17: warning: "SECTION_SIZE" redefined #define SECTION_SIZE (1UL << PA_SECTION_SHIFT) arch/arm64/include/asm/pgtable-hwdef.h:78: note: this is the location of the previous definition #define SECTION_SIZE (_AC(1, UL) << SECTION_SHIFT) Link: http://lkml.kernel.org/r/1569312010-31313-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mika Westerberg
|
a2b90f1121 |
bdi: Do not use freezable workqueue
A removable block device, such as NVMe or SSD connected over Thunderbolt can be hot-removed any time including when the system is suspended. When device is hot-removed during suspend and the system gets resumed, kernel first resumes devices and then thaws the userspace including freezable workqueues. What happens in that case is that the NVMe driver notices that the device is unplugged and removes it from the system. This ends up calling bdi_unregister() for the gendisk which then schedules wb_workfn() to be run one more time. However, since the bdi_wq is still frozen flush_delayed_work() call in wb_shutdown() blocks forever halting system resume process. User sees this as hang as nothing is happening anymore. Triggering sysrq-w reveals this: Workqueue: nvme-wq nvme_remove_dead_ctrl_work [nvme] Call Trace: ? __schedule+0x2c5/0x630 ? wait_for_completion+0xa4/0x120 schedule+0x3e/0xc0 schedule_timeout+0x1c9/0x320 ? resched_curr+0x1f/0xd0 ? wait_for_completion+0xa4/0x120 wait_for_completion+0xc3/0x120 ? wake_up_q+0x60/0x60 __flush_work+0x131/0x1e0 ? flush_workqueue_prep_pwqs+0x130/0x130 bdi_unregister+0xb9/0x130 del_gendisk+0x2d2/0x2e0 nvme_ns_remove+0xed/0x110 [nvme_core] nvme_remove_namespaces+0x96/0xd0 [nvme_core] nvme_remove+0x5b/0x160 [nvme] pci_device_remove+0x36/0x90 device_release_driver_internal+0xdf/0x1c0 nvme_remove_dead_ctrl_work+0x14/0x30 [nvme] process_one_work+0x1c2/0x3f0 worker_thread+0x48/0x3e0 kthread+0x100/0x140 ? current_work+0x30/0x30 ? kthread_park+0x80/0x80 ret_from_fork+0x35/0x40 This is not limited to NVMes so exactly same issue can be reproduced by hot-removing SSD (over Thunderbolt) while the system is suspended. Prevent this from happening by removing WQ_FREEZABLE from bdi_wq. Reported-by: AceLan Kao <acelan.kao@canonical.com> Link: https://marc.info/?l=linux-kernel&m=138695698516487 Link: https://bugzilla.kernel.org/show_bug.cgi?id=204385 Link: https://lore.kernel.org/lkml/20191002122136.GD2819@lahna.fi.intel.com/#t Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |