Decrease log level of checksum errors as these messages can be
triggered remotely by bad packets.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If sending messages with no cable connected, it quickly happens that
there is no more TX context available. Then "gs_can_start_xmit()"
returns with "NETDEV_TX_BUSY" and the upper layer does retry
immediately keeping the CPU busy. To fix that issue, I moved
"atomic_dec(&dev->active_tx_urbs)" from "gs_usb_xmit_callback()" to
the TX done handling in "gs_usb_receive_bulk_callback()". Renaming
"active_tx_urbs" to "active_tx_contexts" and moving it into
"gs_[alloc|free]_tx_context()" would also make sense.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The dlc member of the struct rx_msg contains also the ESD_RTR flag to
mark received RTR frames. Without the fix the can_dlc value for received
RTR frames would always be set to 8 by get_can_dlc() instead of the
received value.
Fixes: 96d8e90382 ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds the missing check and error handling for out-of-memory
situations, when kzalloc cannot allocate memory.
Fixes: cb5635a367 ("can: complete initial namespace support")
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
"proto_tab" is a RCU protected array, when directly accessing the array,
sparse throws these warnings:
CHECK /srv/work/frogger/socketcan/linux/net/can/af_can.c
net/can/af_can.c:115:14: error: incompatible types in comparison expression (different address spaces)
net/can/af_can.c:795:17: error: incompatible types in comparison expression (different address spaces)
net/can/af_can.c:816:9: error: incompatible types in comparison expression (different address spaces)
This patch fixes the problem by using rcu_access_pointer() and
annotating "proto_tab" array as __rcu.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The assignment of net via call sock_net will dereference sk. This
is performed before a sanity null check on sk, so there could be
a potential null dereference on the sock_net call if sk is null.
Fix this by assigning net after the sk null check. Also replace
the sk == NULL with the more usual !sk idiom.
Detected by CoverityScan CID#1431862 ("Dereference before null check")
Fixes: 384317ef41 ("can: network namespace support for CAN_BCM protocol")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Enable FLEXCAN_QUIRK_BROKEN_WERR_STATE and
FLEXCAN_QUIRK_BROKEN_PERR_STATE for p1010 to report correct state
transitions.
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for i.MX28 to report correct
state transitions, especially to error passive.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for i.MX6 to report correct state
transitions.
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add FLEXCAN_QUIRK_BROKEN_PERR_STATE for better description of the
missing error passive interrupt quirk.
Error interrupt flooding may happen if the broken error state quirk fix
is enabled. For example, in case there is singled out node on the bus
and the node sends a frame, then error interrupt flooding happens and
will not stop because the node cannot go to bus off. The flooding will
stop after another node connected to the bus again.
If high bitrate configured on the low end system, then the flooding
may causes performance issue, hence, this patch mitigates this by:
1. disable error interrupt upon error passive state transition
2. re-enable error interrupt upon error warning state transition
3. disable/enable error interrupt upon error active state transition
depends on FLEXCAN_QUIRK_BROKEN_WERR_STATE
In this way, the driver is still able to report correct state
transitions without additional latency. When there are bus problems,
flooding of error interrupts is limited to the number of frames required
to change state from error warning to error passive if the core has
[TR]WRN_INT connected (FLEXCAN_QUIRK_BROKEN_WERR_STATE is not enabled),
otherwise, the flooding is limited to the number of frames required to
change state from error active to error passive.
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Rename FLEXCAN_QUIRK_BROKEN_ERR_STATE to FLEXCAN_QUIRK_BROKEN_WERR_STATE
for better description of the missing [TR]WRN_INT quirk.
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Update state upon any interrupt to report correct state transitions in
case the flexcan core enabled the broken error state quirk fix.
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
interrupt handling was broken with conversion to using regmap caching.
cached_gpio value was updated by boolean status instead of gpio reading.
Fixes: 8f38910ba4 ("pinctrl: mcp23s08: switch to regmap caching")
Tested-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Dmitry Mastykin <mastichi@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On Asus laptop models X505BA, X505BP, X542BA and X542BP, the i2c-hid
touchpad (using a GPIO for interrupts) becomes unresponsive after a
few minutes of usage, or after placing two fingers on the touchpad,
which seems to have the effect of queuing up a large amount of input
data to be transferred.
When the touchpad is in unresponsive state, we observed that the GPIO
level-triggered interrupt is still at it's active level, however the
pinctrl-amd driver is not receiving/dispatching more interrupts at this
point.
After the initial interrupt arrives, amd_gpio_irq_mask() is called
however we then see amd_gpio_irq_handler() being called repeatedly for
the same irq; the interrupt mask is not taking effect because of the
following sequence of events:
- amd_gpio_irq_handler fires, reads and caches pin reg
- amd_gpio_irq_handler calls generic_handle_irq()
- During IRQ handling, amd_gpio_irq_mask() is called and modifies pin reg
- amd_gpio_irq_handler clears interrupt by writing cached value
The stale cached value written at the final stage undoes the masking.
Fix this by re-reading the register before clearing the interrupt.
I also spotted that the interrupt-clearing code can race against
amd_gpio_irq_mask() / amd_gpio_irq_unmask(), so add locking there.
Presumably this race was leading to the loss of interrupts.
After these changes, the touchpad appears to be working fine.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Shah, Nehal-bakulchandra <Nehal-Bakulchandra.shah@amd.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If the connect status change is set during reset signaling, but
the status remains connected just retry port reset.
This solves an issue with connecting a 90W HP Thunderbolt 3 dock
with a Lenovo Carbon x1 (5th generation) which causes a 30min loop
of a high speed device being re-discovererd before usb ports starts
working.
[...]
[ 389.023845] usb 3-1: new high-speed USB device number 55 using xhci_hcd
[ 389.491841] usb 3-1: new high-speed USB device number 56 using xhci_hcd
[ 389.959928] usb 3-1: new high-speed USB device number 57 using xhci_hcd
[...]
This is caused by a high speed device that doesn't successfully go to the
enabled state after the second port reset. Instead the connection bounces
(connected, with connect status change), bailing out completely from
enumeration just to restart from scratch.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1716332
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's a new metro-usb device id for another bar-code scanner.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----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=g3Ln
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.14-rc6
Here's a new metro-usb device id for another bar-code scanner.
Signed-off-by: Johan Hovold <johan@kernel.org>
For CPUs which have an unknown or invalid CPU location (physical location)
assume that their cycle counters aren't syncronized across CPUs.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: c8c3735997 ("parisc: Enhance detection of synchronous cr16 clocksources")
Cc: stable@vger.kernel.org # 4.13+
Signed-off-by: Helge Deller <deller@gmx.de>
In testing target io in read write mix, we did indeed get into cases where
sqhd didn't update properly and slowly missed enough updates to shutdown
the queue.
Protect the updating sqhd by using cmpxchg, and for that turn the sqhd
field into a u32 so that cmpxchg works on it for all architectures.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
__cmpxchg_u64 is built and used outside CONFIG_64BIT and thus needs to
be exported. This fixes the following build error seen when building
parisc:allmodconfig.
ERROR: "__cmpxchg_u64" [drivers/net/ethernet/intel/i40e/i40e.ko] undefined!
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
As discussed on the debian-hppa list, double-wordcompare and exchange
operations fail on 32-bit kernels. Looking at the code, I realized that
the ",ma" completer does the wrong thing in the "ldw,ma 4(%r26), %r29"
instruction. This increments %r26 and causes the following store to
write to the wrong location.
Note by Helge Deller:
The patch applies cleanly to stable kernel series if this upstream
commit is merged in advance:
f4125cfdb3 ("parisc: Avoid trashing sr2 and sr3 in LWS code").
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Tested-by: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Fixes: 8920649120 ("parisc: Implement new LWS CAS supporting 64 bit operations.")
Cc: stable@vger.kernel.org # 3.13+
Signed-off-by: Helge Deller <deller@gmx.de>
Fix for stable:
- Fix DDI translation tables for BDW (Chris).
Critical fix:
- Fix GPU Hang on GVT (Changbin).
Other fixes:
- Fix eviction when GGTT is idle (Chris).
- CNL PLL fixes (Rodrigo).
- Fix pwrite into shmemfs (Chris).
- Mask bits for BXT and CHV L3 Workaround
WaProgramL3SqcReg1Default (Oscar).
* tag 'drm-intel-fixes-2017-10-18-1' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Use a mask when applying WaProgramL3SqcReg1Default
drm/i915: Report -EFAULT before pwrite fast path into shmemfs
drm/i915/cnl: Fix PLL initialization for HDMI.
drm/i915/cnl: Fix PLL mapping.
drm/i915: Use bdw_ddi_translations_fdi for Broadwell
drm/i915: Fix eviction when the GGTT is idle but full
drm/i915/gvt: Fix GPU hang after reusing vGPU instance across different guest OS
The pointer fs_ns is assigned from inode->i_ib->s_user_ns before
a null pointer check on inode, hence if inode is actually null we
will get a null pointer dereference on this assignment. Fix this
by only dereferencing inode after the null pointer check on
inode.
Detected by CoverityScan CID#1455328 ("Dereference before null check")
Fixes: 8db6c34f1d ("Introduce v3 namespaced file capabilities")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The commit 78bcac7b2a ("Input: add support for the STMicroelectronics
FingerTip touchscreen) used the 'touchscreen_parse_properties()' helper
function in order to get the value of common properties.
But, commit 78bcac7b2a didn't set the capability of ABS_MT_POSITION_*
before calling touchscreen_parse_properties(). In result, the max_x and
max_y of 'struct touchscreen_properties' were not set.
Fixes: 78bcac7b2a ("Input: add support for the STMicroelectronics FingerTip touchscreen")
Cc: stable@vger.kernel.org
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Step config setting for 5 wire touchscreen is incorrect for Y coordinates.
It was broken while we moved to DT. If you look close at the offending
commit bb76dc09dd ("input: ti_am33x_tsc: Order of TSC wires, made
configurable"), the change was:
- STEPCONFIG_XNP | STEPCONFIG_YPN;
+ ts_dev->bit_xn | ts_dev->bit_yp;
while bit_xn = STEPCONFIG_XNN and bit_yp = STEPCONFIG_YNN. Not quite the
same.
Fixes: bb76dc09dd ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Signed-off-by: Jeff Lance <j-lance1@ti.com>
[vigneshr@ti.com: Rebase to v4.14-rc1]
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Single amdgpu regression fix.
* 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux:
Revert "drm/amdgpu: discard commands of killed processes"
[AV: in addition to the fix in previous commit]
Signed-off-by: Matthew Garrett <mjg59@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
some nouveau fixes.
* 'linux-4.14' of git://github.com/skeggsb/linux:
drm/nouveau/fbcon: fix oops without fbdev emulation
drm/nouveau/kms/nv50: fix oops during DP IRQ handling on non-MST boards
drm/nouveau/bsp/g92: disable by default
drm/nouveau/mmu: flush tlbs before deleting page tables
This is similar to an earlier commit 52dfcc5ccf ("drm/nouveau: fix for
disabled fbdev emulation"), but protects all occurrences of helper.fbdev
in the source.
I see oops in nouveau_fbcon_accel_save_disable() called from
nouveau_fbcon_set_suspend_work() on Linux 3.13 when
CONFIG_DRM_FBDEV_EMULATION option is disabled.
Signed-off-by: Pavel Roskin <plroskin@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
- fix some more CONFIG_XFS_RT related build problems
- fix data loss when writeback at eof races eofblocks gc and loses
- invalidate page cache after fs finishes a dio write
- remove dirty page state when invalidating pages so releasepage does
the right thing when handed a dirty page
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UY00
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.14-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- fix some more CONFIG_XFS_RT related build problems
- fix data loss when writeback at eof races eofblocks gc and loses
- invalidate page cache after fs finishes a dio write
- remove dirty page state when invalidating pages so releasepage does
the right thing when handed a dirty page
* tag 'xfs-4.14-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: move two more RT specific functions into CONFIG_XFS_RT
xfs: trim writepage mapping to within eof
fs: invalidate page cache after end_io() in dio completion
xfs: cancel dirty pages on invalidation
Pull block fixes from Jens Axboe:
"Three small fixes:
- A fix for skd, it was using kfree() to free a structure allocate
with kmem_cache_alloc().
- Stable fix for nbd, fixing a regression using the normal ioctl
based tools.
- Fix for a previous fix in this series, that fixed up
inconsistencies between buffered and direct IO"
* 'for-linus' of git://git.kernel.dk/linux-block:
fs: Avoid invalidation in interrupt context in dio_complete()
nbd: don't set the device size until we're connected
skd: Use kmem_cache_free
Currently, if a frame is lost of command fails as part of initial
association create for a new controller, the new controller connection
request will immediately fail.
Add in an immediate 3 retry loop before giving up.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Andrey used the syzkaller fuzzer to find an out-of-bounds memory
access in usb_get_bos_descriptor(). The code wasn't checking that the
next usb_dev_cap_header structure could fit into the remaining buffer
space.
This patch fixes the error and also reduces the bNumDeviceCaps field
in the header to match the actual number of capabilities found, in
cases where there are fewer than expected.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The channel value for requesting server remote invalidating local memory
registration should be 0x00000002
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Update reading the EA using increasingly larger buffer sizes
until the response will fit in the buffer, or we exceed the
(arbitrary) maximum set to 64kb.
Without this change, a user is able to add more and more EAs using
setfattr until the point where the total space of all EAs exceed 2kb
at which point the user can no longer list the EAs at all
and getfattr will abort with an error.
The same issue still exists for EAs in SMB1.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
SMB3.1.1 is most secure and recent dialect. Fixup labels and lengths
for sMB3.1.1 signing and encryption.
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Otherwise we are blasting other bits in GEN8_L3SQCREG1 that might be important
(although we probably aren't at the moment because 0 seems to be the default
for all the other bits).
v2: Extra parentheses (Michel)
Fixes: 050fc46 ("drm/i915:bxt: implement WaProgramL3SqcReg1DefaultForPerf")
Fixes: 450174f ("drm/i915/chv: Tune L3 SQC credits based on actual latencies")
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508271945-14961-1-git-send-email-oscar.mateo@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 930a784d02)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When pwriting into shmemfs, the fast path pagecache_write does not
notice when it is writing to beyond the end of the truncated shmemfs
inode. Report -EFAULT directly when we try to use pwrite into the
!I915_MADV_WILLNEED object.
Fixes: 7c55e2c577 ("drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl")
Testcase: igt/gem_madvise/dontneed-before-pwrite
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016202732.25459-1-chris@chris-wilson.co.uk
(cherry picked from commit a6d65e451c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Borislav thinks that we don't need this knob in a released kernel.
Get rid of it.
Requested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b956575bed ("x86/mm: Flush more aggressively in lazy TLB mode")
Link: http://lkml.kernel.org/r/1fa72431924e81e86c164ff7881bf9240d1f1a6c.1508000261.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Due to timezones, commit:
b956575bed ("x86/mm: Flush more aggressively in lazy TLB mode")
was an outdated patch that well tested and fixed the bug but didn't
address Borislav's review comments.
Tidy it up:
- The name "tlb_use_lazy_mode()" was highly confusing. Change it to
"tlb_defer_switch_to_init_mm()", which describes what it actually
means.
- Move the static_branch crap into a helper.
- Improve comments.
Actually removing the debugfs option is in the next patch.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b956575bed ("x86/mm: Flush more aggressively in lazy TLB mode")
Link: http://lkml.kernel.org/r/154ef95428d4592596b6e98b0af1d2747d6cfbf8.1508000261.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Blacklist Broadwell X model 79 for late loading due to an erratum.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171018111225.25635-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The previous commit (0adbfd46) fixed a memory leak but also freed a
block in the success case, causing a stale pointer to be used with
potentially fatal results. Only free the vchi_instance block in the
case that vchi_connect fails; once connected, the instance is
retained for subsequent connections.
Simplifying the code by removing a bunch of gotos and returning errors
directly.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Fixes: 0adbfd4694 ("staging: bcm2835-audio: fix memory leak in bcm2835_audio_open_connection()")
Cc: stable <stable@vger.kernel.org> # 4.12+
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit f1174f77b5 ("bpf/verifier: rework value tracking")
removed the crafty selection of which pointer types are
allowed to be modified. This is OK for most pointer types
since adjust_ptr_min_max_vals() will catch operations on
immutable pointers. One exception is PTR_TO_CTX which is
now allowed to be offseted freely.
The intent of aforementioned commit was to allow context
access via modified registers. The offset passed to
->is_valid_access() verifier callback has been adjusted
by the value of the variable offset.
What is missing, however, is taking the variable offset
into account when the context register is used. Or in terms
of the code adding the offset to the value passed to the
->convert_ctx_access() callback. This leads to the following
eBPF user code:
r1 += 68
r0 = *(u32 *)(r1 + 8)
exit
being translated to this in kernel space:
0: (07) r1 += 68
1: (61) r0 = *(u32 *)(r1 +180)
2: (95) exit
Offset 8 is corresponding to 180 in the kernel, but offset
76 is valid too. Verifier will "accept" access to offset
68+8=76 but then "convert" access to offset 8 as 180.
Effective access to offset 248 is beyond the kernel context.
(This is a __sk_buff example on a debug-heavy kernel -
packet mark is 8 -> 180, 76 would be data.)
Dereferencing the modified context pointer is not as easy
as dereferencing other types, because we have to translate
the access to reading a field in kernel structures which is
usually at a different offset and often of a different size.
To allow modifying the pointer we would have to make sure
that given eBPF instruction will always access the same
field or the fields accessed are "compatible" in terms of
offset and size...
Disallow dereferencing modified context pointers and add
to selftests the test case described here.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In debian/ubuntu, libc.so is located at a different place,
/lib/x86_64-linux-gnu/libc-2.23.so, so it outputs like this when testing:
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.040 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.040/0.040/0.040/0.000 ms
0.000 probe_libc:inet_pton:(7f0e2db741c0))
__GI___inet_pton (/lib/x86_64-linux-gnu/libc-2.23.so)
getaddrinfo (/lib/x86_64-linux-gnu/libc-2.23.so)
[0xffffa9d40f34ff4d] (/bin/ping)
Fix up the libc path to make sure this test works in more OSes.
Committer testing:
When this test fails one can use 'perf test -v', i.e. in verbose mode, where
it'll show the expected backtrace, so, after applying this test:
On Fedora 26:
# perf test -v ping
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 23322
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.058 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.058/0.058/0.058/0.000 ms
0.000 probe_libc:inet_pton:(7fe344310d80))
__GI___inet_pton (/usr/lib64/libc-2.25.so)
getaddrinfo (/usr/lib64/libc-2.25.so)
_init (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philip Li <philip.li@intel.com>
Link: http://lkml.kernel.org/r/1508315649-18836-1-git-send-email-lizhijian@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In current xyarray code, xyarray__max_x() returns max_y, and xyarray__max_y()
returns max_x.
It's confusing and for code logic it looks not correct.
Error happens when closing evsel fd. Let's see this scenario:
1. Allocate an fd (pseudo-code)
perf_evsel__alloc_fd(struct perf_evsel *evsel, int ncpus, int nthreads)
{
evsel->fd = xyarray__new(ncpus, nthreads, sizeof(int));
}
xyarray__new(int xlen, int ylen, size_t entry_size)
{
size_t row_size = ylen * entry_size;
struct xyarray *xy = zalloc(sizeof(*xy) + xlen * row_size);
xy->entry_size = entry_size;
xy->row_size = row_size;
xy->entries = xlen * ylen;
xy->max_x = xlen;
xy->max_y = ylen;
......
}
So max_x is ncpus, max_y is nthreads and row_size = nthreads * 4.
2. Use perf syscall and get the fd
int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
struct thread_map *threads)
{
for (cpu = 0; cpu < cpus->nr; cpu++) {
for (thread = 0; thread < nthreads; thread++) {
int fd, group_fd;
fd = sys_perf_event_open(&evsel->attr, pid, cpus->map[cpu],
group_fd, flags);
FD(evsel, cpu, thread) = fd;
}
}
static inline void *xyarray__entry(struct xyarray *xy, int x, int y)
{
return &xy->contents[x * xy->row_size + y * xy->entry_size];
}
These codes don't have issues. The issue happens in the closing of fd.
3. Close fd.
void perf_evsel__close_fd(struct perf_evsel *evsel)
{
int cpu, thread;
for (cpu = 0; cpu < xyarray__max_x(evsel->fd); cpu++)
for (thread = 0; thread < xyarray__max_y(evsel->fd); ++thread) {
close(FD(evsel, cpu, thread));
FD(evsel, cpu, thread) = -1;
}
}
Since xyarray__max_x() returns max_y (nthreads) and xyarry__max_y()
returns max_x (ncpus), so above code is actually to be:
for (cpu = 0; cpu < nthreads; cpu++)
for (thread = 0; thread < ncpus; ++thread) {
close(FD(evsel, cpu, thread));
FD(evsel, cpu, thread) = -1;
}
It's not correct!
This change is introduced by "475fb533fb7d" ("perf evsel: Fix buffer overflow
while freeing events")
This fix is to let xyarray__max_x() return max_x (ncpus) and
let xyarry__max_y() return max_y (nthreads)
Committer note:
This was also fixed by Ravi Bangoria, who provided the same patch,
noticing the problem with 'perf record':
<quote Ravi>
I see 'perf record -p <pid>' crashes with following log:
*** Error in `./perf': free(): invalid next size (normal): 0x000000000298b340 ***
======= Backtrace: =========
/lib/x86_64-linux-gnu/libc.so.6(+0x777e5)[0x7f7fd85c87e5]
/lib/x86_64-linux-gnu/libc.so.6(+0x8037a)[0x7f7fd85d137a]
/lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f7fd85d553c]
./perf(perf_evsel__close+0xb4)[0x4b7614]
./perf(perf_evlist__delete+0x100)[0x4ab180]
./perf(cmd_record+0x1d9)[0x43a5a9]
./perf[0x49aa2f]
./perf(main+0x631)[0x427841]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f7fd8571830]
./perf(_start+0x29)[0x427a59]
</>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Fixes: d74be47673 ("perf xyarray: Save max_x, max_y")
Link: http://lkml.kernel.org/r/1508339478-26674-1-git-send-email-yao.jin@linux.intel.com
Link: http://lkml.kernel.org/r/1508327446-15302-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It seems that it's possible to toggle NETLINK_F_EXT_ACK
through setsockopt() while another thread/CPU is building
a message inside netlink_ack(), which could then trigger
the WARN_ON()s I added since if it goes from being turned
off to being turned on between allocating and filling the
message, the skb could end up being too small.
Avoid this whole situation by storing the value of this
flag in a separate variable and using that throughout the
function instead.
Fixes: 2d4bc93368 ("netlink: extended ACK reporting")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch correctly sets the number of additional header descriptors
that will be sent in an indirect SCRQ entry.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
