Commit Graph

64921 Commits

Author SHA1 Message Date
Scott Peterson
881571c12f fm10k: Limit dma sync of RX buffers to actual packet size
On packet RX, we perform a dma sync for cpu before passing the
packet up.  Here we limit that sync to the actual length of the
incoming packet, rather than always syncing the entire buffer.

Signed-off-by: Scott Peterson <scott.d.peterson@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-08 01:39:49 -08:00
Jacob Keller
6721f2dad5 fm10k: bump version number
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-08 01:36:35 -08:00
Ngai-Mint Kwan
f052495517 fm10k: do not clear global mailbox interrupt bits
Partially revert commit 5e93cbadd3 ("fm10k: Reset mailbox global
interrupts", 2016-06-07)

The register bits related to this commit are now solely being handled by
the IES API. Recent changes in the IES API will allow an automatic
recovery from improper handling of these bits.

Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-08 01:35:19 -08:00
Ngai-Mint Kwan
2f3fc1e620 fm10k: request reset when mbx->state changes
Multiple IES API resets can cause a race condition where the mailbox
interrupt request bits can be cleared before being handled. This can
leave certain mailbox messages from the PF to be untreated and the PF
will enter in some inactive state. If this situation occurs, the IES API
will initiate a mailbox version reset which, then, trigger a mailbox
state change. Once this mailbox transition occurs (from OPEN to CONNECT
state), a request for reset will be returned.

This ensures that PF will undergo a reset whenever IES API encounters an
unknown global mailbox interrupt event or whenever the IES API
terminates.

Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-08 01:33:43 -08:00
Jacob Keller
aee2433344 fm10k: remove extraneous variable definition in fm10k_ethtool.c
We don't need to typecast a u8 * into a char *, so just remove the extra
variable.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-08 01:31:46 -08:00
Ngai-Mint Kwan
50bfaee50c fm10k-shared: use mac-> instead of hw->mac.
Since a pointer "mac" to fm10k_mac_info structure exists, use it to
access the contents of its members.

Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-08 01:22:57 -08:00
Eli Cohen
a6d51b6861 net/mlx5: Introduce blue flame register allocator
Here is an implementation of an allocator that allocates blue flame
registers. A blue flame register is used for generating send doorbells.
A blue flame register can be used to generate either a regular doorbell
or a blue flame doorbell where the data to be sent is written to the
device's I/O memory hence saving the need to read the data from memory.
For blue flame kind of doorbells to succeed, the blue flame register
need to be mapped as write combining. The user can specify what kind of
send doorbells she wishes to use. If she requested write combining
mapping but that failed, the allocator will fall back to non write
combining mapping and will indicate that to the user.
Subsequent patches in this series will make use of this allocator.

Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-01-08 11:21:26 +02:00
Eli Cohen
2f5ff26478 mlx5: Fix naming convention with respect to UARs
This establishes a solid naming conventions for UARs. A UAR (User Access
Region) can have size identical to a system page or can be fixed 4KB
depending on a value queried by firmware. Each UAR always has 4 blue
flame register which are used to post doorbell to send queue. In
addition, a UAR has section used for posting doorbells to CQs or EQs. In
this patch we change names to reflect this conventions.

Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-01-08 11:21:26 +02:00
Michael Chan
f5992b72eb tg3: Fix race condition in tg3_get_stats64().
The driver's ndo_get_stats64() method is not always called under RTNL.
So it can race with driver close or ethtool reconfigurations.  Fix the
race condition by taking tp->lock spinlock in tg3_free_consistent()
when freeing the tp->hw_stats memory block.  tg3_get_stats64() is
already taking tp->lock.

Reported-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 21:35:04 -05:00
Ivan Vecera
6052cd1af8 be2net: fix unicast list filling
The adapter->pmac_id[0] item is used for primary MAC address but
this is not true for adapter->uc_list[0] as is assumed in
be_set_uc_list(). There are N UC addresses copied first from net_device
to adapter->uc_list[1..N] and then N UC addresses from
adapter->uc_list[0..N-1] are sent to HW. So the last UC address is never
stored into HW and address 00:00:00:00;00:00 (from uc_list[0]) is used
instead.

Cc: Sathya Perla <sathya.perla@broadcom.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Fixes: b717241 be2net: replace polling with sleeping in the FW completion path
Signed-off-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 21:25:10 -05:00
Karicheri, Muralidharan
b361da8373 net: netcp: ale: add proper ale entry mask bits for netcp switch ALE
For NetCP NU Switch ALE, some of the mask bits are different than
defaults used in the driver. Add a new macro DEFINE_ALE_FIELD1 that use
a configurable mask bits and use it in the driver. These bits are set to
correct values by using the new variables added to cpsw_ale structure
and re-used in the macros. The parameter nu_switch_ale is configured by
the caller driver to indicate the ALE is for that switch and is used in
the ALE driver to do customization as needed.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 21:03:50 -05:00
Karicheri, Muralidharan
7938a0d75f net: netcp: ale: use ale_status to size the ale table
ALE h/w on newer version of NetCP (K2E/L/G) does provide a ALE_STATUS
register for the size of the ALE Table implemented in h/w. Currently
for example we set ALE Table size to 1024 for NetCP ALE on
K2E even though the ALE Status/Documentation shows it has 8192 entries.
So take advantage of this register to read the size of ALE table supported
and use that value in the driver for the newer version of NetCP ALE.
For NetCP lite, ALE Table size is much less (64) and indicated by a size
of zero in ALE_STATUS. So use that as a default for now. While at it,
also fix the ale table size on 10G switch to 2048 per User guide
http://www.ti.com/lit/ug/spruhj5/spruhj5.pdf

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 21:03:50 -05:00
Karicheri, Muralidharan
ca47130a74 net: netcp: ale: update to support unknown vlan controls for NU switch
In NU Ethernet switch used on some of the Keystone SoCs, there is
separate UNKNOWNVLAN register for membership, unreg mcast flood, reg
mcast flood and force untag egress bits in ALE. So control for these
fields require different address offset, shift and size of field.
As this ALE has the same version number as ALE in CPSW found on other
SoCs, customization based on version number is not possible. So
use a configuration parameter, nu_switch_ale, to identify the ALE
ALE found in NU Switch. Different treatment is needed for NU Switch
ALE due to difference in the ale table bits, separate unknown vlan
registers etc. The register information available in ale_controls,
needs to be updated to support the netcp NU switch h/w. So it is not
constant array any more since it needs to be updated based
on ALE type. The header of the file is also updated to indicate it
supports N port switch ALE, not just 3 port. The version mask is
3 bits in NU Switch ALE vs 8 bits on other ALE types.

While at it, change the debug print to info print so that ALE
version gets displayed in boot log.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 21:03:50 -05:00
Karicheri, Muralidharan
4cd85a61d2 net: netcp: use hw capability to remove FCS word from rx packets
Some of the newer Ethernet switch hw (such as that on k2e/l/g) can
strip the Etherenet FCS from packet at the port 0 egress of the switch.
So use this capability instead of doing it in software.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 21:03:50 -05:00
Karicheri, Muralidharan
0cead3a6a1 net: netcp: ethss: get phy-handle only if link interface is MAC-to-PHY
Currently to parse phy-handle, driver doesn't check if the interface is
MAC to PHY. This patch add this check for all MAC to PHY interface types
supported by the driver.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 21:03:50 -05:00
Michael Scherban
6a8162e99e net: netcp: store network statistics in 64 bits
Previously the network statistics were stored in 32 bit variable
which can cause some stats to roll over after several minutes of
high traffic. This implements 64 bit storage so larger numbers
can be stored.

Signed-off-by: Michael Scherban <m-scherban@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 21:03:50 -05:00
Karicheri, Muralidharan
aa255101f7 net: netcp: remove the redundant memmov()
The psdata is populated with command data by netcp modules
to the tail of the buffer and set_words() copy the same
to the front of the psdata. So remove the redundant memmov
function call.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 21:03:50 -05:00
Karicheri, Muralidharan
69d707d034 net: netcp: extract eflag from desc for rx_hook handling
Extract the eflag bits from the received desc and pass it down
the rx_hook chain to be available for netcp modules. Also the
psdata and epib data has to be inspected by the netcp modules.
So the desc can be freed only after returning from the rx_hook.
So move knav_pool_desc_put() after the rx_hook processing.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 21:03:50 -05:00
Grygorii Strashko
be034fc140 net: ethernet: ti: cpsw: add support for ringparam configuration
The CPDMA uses one pool of descriptors for both RX and TX which by default
split between all channels proportionally depending on total number of
CPDMA channels and number of TX and RX channels. As result, more
descriptors will be consumed by TX path if there are more TX channels and
there is no way now to dedicate more descriptors for RX path.

So, add the ability to re-split CPDMA pool of descriptors between RX and TX
path via ethtool '-G' command wich will allow to configure and fix number
of descriptors used by RX and TX path, which, then, will be split between
RX/TX channels proportionally depending on RX/TX channels number and
weight. ethtool '-G' command will accept only number of RX entries and rest
of descriptors will be arranged for TX automatically.

Command:
  ethtool -G <devname> rx <number of descriptors>

defaults and limitations:
- minimum number of rx descriptors is 10% of total number of descriptors in
  CPDMA pool
- maximum number of rx descriptors is 90% of total number of descriptors in
  CPDMA pool
- by default, descriptors will be split equally between RX/TX path
- any values passed in "tx" parameter will be ignored

Usage:

 # ethtool -g eth0
	Pre-set maximums:
	RX:             7372
	RX Mini:        0
	RX Jumbo:       0
	TX:             0
	Current hardware settings:
	RX:             4096
	RX Mini:        0
	RX Jumbo:       0
	TX:             4096

 # ethtool -G eth0 rx 7372
 # ethtool -g eth0
	Ring parameters for eth0:
	Pre-set maximums:
	RX:             7372
	RX Mini:        0
	RX Jumbo:       0
	TX:             0
	Current hardware settings:
	RX:             7372
	RX Mini:        0
	RX Jumbo:       0
	TX:             820

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 20:48:14 -05:00
Grygorii Strashko
90225bf0ba net: ethernet: ti: cpsw: add support for descs pool size configuration
The CPSW CPDMA can process buffer descriptors placed as in internal
CPPI RAM as in DDR. This patch adds support in CPSW and CPDMA for
descs_pool_size mudule parameter, which defines total number of CPDMA CPPI
descriptors to be used for both ingress/egress packets processing:
 - memory size, required for CPDMA descriptor pool, is calculated basing
on number of descriptors specified by user in descs_pool_size and
CPDMA descriptor size and allocated from coherent memory (CMA area);
 - CPDMA descriptor pool will be allocated in DDR if pool memory size >
internal CPPI RAM or use internal CPPI RAM otherwise;
 - if descs_pool_size not specified in DT - the default value 256 will
be used which will allow to place CPDMA descriptors pool into the
internal CPPI RAM (current default behaviour);
 - CPDMA will ignore descs_pool_size if descs_pool_size = 0 for
backward comaptiobility with davinci_emac.

descs_pool_size is boot time setting and can't be changed once
CPSW/CPDMA is initialized.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 20:48:14 -05:00
Grygorii Strashko
7f3b490aaa net: ethernet: ti: cpdma: use devm_ioremap
Use devm_ioremap() and simplify the code.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 20:48:14 -05:00
Grygorii Strashko
5fcc40a900 net: ethernet: ti: cpdma: minimize number of parameters in cpdma_desc_pool_create/destroy()
Update cpdma_desc_pool_create/destroy() to accept only one parameter
struct cpdma_ctlr*, as this structure contains all required
information for pool creation/destruction.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 20:48:14 -05:00
Grygorii Strashko
12a303e3b8 net: ethernet: ti: cpdma: fix desc re-queuing
The currently processing cpdma descriptor with EOQ flag set may
contain two values in Next Descriptor Pointer field:
- valid pointer: means CPDMA missed addition of new desc in queue;
- null: no more descriptors in queue.
In the later case, it's not required to write to HDP register, but now
CPDMA does it.

Hence, add additional check for Next Descriptor Pointer != null in
cpdma_chan_process() function before writing in HDP register.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 20:48:14 -05:00
Grygorii Strashko
a6c83ccf3c net: ethernet: ti: cpdma: am437x: allow descs to be plased in ddr
It's observed that cpsw/cpdma is not working properly when CPPI
descriptors are placed in DDR instead of internal CPPI RAM on am437x
SoC:
- rx/tx silently stops processing packets;
- or - after boot it's working for sometime, but stuck once Network
load is increased (ping is working, but iperf is not).
(The same issue has not been reproduced on am335x and am57xx).

It seems that write to HDP register processed faster by interconnect
than writing of descriptor memory buffer in DDR, which is probably
caused by store buffer / write buffer differences as these functions
are implemented differently across devices. So, to fix this i come up
with two minimal, required changes:

1) all accesses to the channel register HDP/CP/RXFREE registers should
be done using sync IO accessors readl()/writel(), because all previous
memory writes writes have to be completed before starting channel
(write to HDP) or completing desc processing.

2) the change 1 only doesn't work on am437x and additional reading of
desc's field is required right after the new descriptor was filled
with data and before pointer on it will be stored in
prev_desc->hw_next field or HDP register.

In addition, to above changes this patch eliminates all relaxed ordering
I/O accessors in this driver as suggested by David Miller to avoid such
kind of issues in the future, but with one exception - relaxed IO accessors
will still be used to fill desc in cpdma_chan_submit(), which is safe as
there is read barrier at the end of write sequence, and because sync IO
accessors usage here will affect on net performance.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 20:48:14 -05:00
Ivan Vecera
1d0f110a2c be2net: fix accesses to unicast list
Commit 988d44b "be2net: Avoid redundant addition of mac address in HW"
introduced be_dev_mac_add & be_uc_mac_add helpers that incorrectly
access adapter->uc_list as an array of bytes instead of an array of
be_eth_addr. Consequently NIC is not filled with valid data so unicast
filtering is broken.

Cc: Sathya Perla <sathya.perla@broadcom.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Fixes: 988d44b be2net: Avoid redundant addition of mac address in HW
Signed-off-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 22:22:08 -05:00
Ganesh Goudar
89eb9835b2 cxgb4: Add port description for new cards.
Add port description for 25G and 100G cards, and also
change few port descriptions in compliance with the new
naming convention.

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 16:23:40 -05:00
Ganesh Goudar
5e78f7fd37 cxgb4/cxgb4vf: Display 25G and 100G link speed
Add support to report 25G and 100G links, which was missed
as part of commit "eb97ad99f9ed".

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 16:22:49 -05:00
David S. Miller
c5e7099137 Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2017-01-06

This series contains updates/fixes to igb and e1000e.

Joe fixes indentation and improper line wrapping in igb.

David Singleton fixes an issue in e1000e where in systemd, where things
are done in parallel and can create a condition where e1000_shutdown is
called after e1000_close, hitting BUG_ON assert in free_msi_irqs.

Cao Jin fixes a code comment on the wakeup status register.  Also fixes
a possible NULL pointer dereference by using igb_adapter->io_addr
instead of e1000_hw->hw_addr in igb_configure_tx_ring().

Chris Arges works around a firmware issue, which can cause probe of i210
NIC to fail, so zero the page select register during igb_get_phy_id() to
workaround the issue.  Aaron Sierra adds also a check for this issue
during the initialization of PHY parameters to ensure that this same
issue happens after probe.

Todd fixes a possible race condition in close/suspend by extending
the rtnl_lock() to protect the call to netif_device_detach() and
igb_clear_interrupt_scheme().  Also adds i211 to a known i210/i211
workaround.

Hannu Lounento fixes inverted logic on a debug statement.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 16:05:37 -05:00
Hariprasad Shenai
4055ae5e6d cxgb4: Synchronize access to mailbox
The issue comes when there are multiple threads attempting to use
the mailbox facility at the same time.
When DCB operations and interface up/down is run in a loop for every
0.1 sec, we observed mailbox collisions. And out of the two commands
one would fail with the present code, since we don't queue the second
command.

To overcome the above issue, added a queue to access the mailbox.
Whenever a mailbox command is issued add it to the queue. If its at
the head issue the mailbox command, else wait for the existing command
to complete. Usually command takes less than a milli-second to
complete.

Also timeout from the loop, if the command under execution takes
long time to run.

In reality, the number of mailbox access collisions is going to be
very rare since no one runs such abusive script.

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 15:54:40 -05:00
Grygorii Strashko
5ca7d1ca77 net: phy: dp83867: fix irq generation
For proper IRQ generation by DP83867 phy the INT/PWDN pin has to be
programmed as an interrupt output instead of a Powerdown input in
Configuration Register 3 (CFG3), Address 0x001E, bit 7 INT_OE = 1. The
current driver doesn't do this and as result IRQs will not be generated by
DP83867 phy even if they are properly configured in DT.

Hence, fix IRQ generation by properly configuring CFG3.INT_OE bit and
ensure that Link Status Change (LINK_STATUS_CHNG_INT) and Auto-Negotiation
Complete (AUTONEG_COMP_INT) interrupt are enabled. After this the DP83867
driver will work properly in interrupt enabled mode.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 15:52:43 -05:00
Florian Fainelli
4b92ea81cc net: dsa: b53: Utilize common helpers for u64/MAC
Utilize the two functions recently introduced: u64_to_ether() and
ether_to_u64() instead of our own versions.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 15:51:29 -05:00
Weilin Chang
026b471bfc liquidio: fix wrong information about channels reported to ethtool
Information reported to ethtool about channels is sometimes wrong for PF,
and always wrong for VF.  Fix them by getting the information from the
right fields from the right structs.

Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 15:44:19 -05:00
Lendacky, Thomas
896b4db685 amd-xgbe: Fix IRQ processing when running in single IRQ mode
When running in single IRQ mode, the additional IRQ routines were being
skipped because only the XGMAC interrupt status was being checked.
Update the code so that the additional IRQ routines are checked whenever
an interrupt is received.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 15:34:05 -05:00
Prasad Kanneganti
90028b07a7 liquidio VF: fix incorrect struct being used
The VF driver is using the wrong struct when sending commands to the NIC
firmware, sometimes causing adverse effects in the firmware.  The right
struct is the one that the PF is using, so make the VF use that as well.

Signed-off-by: Prasad Kanneganti <prasad.kanneganti@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 15:31:24 -05:00
Sergei Shtylyov
0f1f9cbc04 sh_eth: R8A7740 supports packet shecksumming
The R8A7740 GEther controller supports the packet checksum offloading
but the 'hw_crc' (bad name, I'll fix it) flag isn't set in the R8A7740
data,  thus CSMR isn't cleared...

Fixes: 73a0d90730 ("net: sh_eth: add support R8A7740")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 15:23:01 -05:00
Sergei Shtylyov
978d3639fd sh_eth: fix EESIPR values for SH77{34|63}
As the SH77{34|63} manuals are freely available,  I've checked the EESIPR
values written against the manuals, and they appeared to set the reserved
bits 11-15 (which should be 0 on write). Fix those EESIPR values.

Fixes: 380af9e390 ("net: sh_eth: CPU dependency code collect to "struct sh_eth_cpu_data"")
Fixes: f5d12767c8 ("sh_eth: get SH77{34|63} support out of #ifdef")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 15:23:01 -05:00
Hannu Lounento
76ed5a8f47 igb: Fix hw_dbg logging in igb_update_flash_i210
Fix an if statement with hw_dbg lines where the logic was inverted with
regards to the corresponding return value used in the if statement.

Signed-off-by: Hannu Lounento <hannu.lounento@ge.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-06 02:23:22 -08:00
Todd Fujinaka
5bc8c230e2 igb: add i211 to i210 PHY workaround
i210 and i211 share the same PHY but have different PCI IDs. Don't
forget i211 for any i210 workarounds.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-06 02:23:01 -08:00
Todd Fujinaka
9474933caf igb: close/suspend race in netif_device_detach
Similar to ixgbe, when an interface is part of a namespace it is
possible that igb_close() may be called while __igb_shutdown() is
running which ends up in a double free WARN and/or a BUG in
free_msi_irqs().

Extend the rtnl_lock() to protect the call to netif_device_detach() and
igb_clear_interrupt_scheme() in __igb_shutdown() and check for
netif_device_present() to avoid calling igb_clear_interrupt_scheme() a
second time in igb_close().

Also extend the rtnl lock in igb_resume() to netif_device_attach().

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-06 02:18:51 -08:00
Guilherme G Piccoli
69b97cf6db igb: re-assign hw address pointer on reset after PCI error
Whenever the igb driver detects the result of a read operation returns
a value composed only by F's (like 0xFFFFFFFF), it will detach the
net_device, clear the hw_addr pointer and warn to the user that adapter's
link is lost - those steps happen on igb_rd32().

In case a PCI error happens on Power architecture, there's a recovery
mechanism called EEH, that will reset the PCI slot and call driver's
handlers to reset the adapter and network functionality as well.

We observed that once hw_addr is NULL after the error is detected on
igb_rd32(), it's never assigned back, so in the process of resetting
the network functionality we got a NULL pointer dereference in both
igb_configure_tx_ring() and igb_configure_rx_ring(). In order to avoid
such bug, this patch re-assigns the hw_addr value in the slot_reset
handler.

Reported-by: Anthony H Thai <ahthai@us.ibm.com>
Reported-by: Harsha Thyagaraja <hathyaga@in.ibm.com>
Signed-off-by: Guilherme G Piccoli <gpiccoli@linux.vnet.ibm.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-06 02:18:51 -08:00
Aaron Sierra
1827853354 igb: reset the PHY before reading the PHY ID
Several people have reported firmware leaving the I210/I211 PHY's page
select register set to something other than the default of zero. This
causes the first accesses, PHY_IDx register reads, to access something
else, resulting in device probe failure:

    igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
    igb: Copyright (c) 2007-2014 Intel Corporation.
    igb: probe of 0000:01:00.0 failed with error -2

This problem began for them after a previous patch I submitted was
applied:

    commit 2a3cdead8b
    Author: Aaron Sierra <asierra@xes-inc.com>
    Date:   Tue Nov 3 12:37:09 2015 -0600

        igb: Remove GS40G specific defines/functions

I personally experienced this problem after attempting to PXE boot from
I210 devices using this firmware:

    Intel(R) Boot Agent GE v1.5.78
    Copyright (C) 1997-2014, Intel Corporation

Resetting the PHY before reading from it, ensures the page select
register is in its default state and doesn't make assumptions about
the PHY's register set before the PHY has been probed.

Cc: Matwey V. Kornilov <matwey@sai.msu.ru>
Cc: Chris Arges <carges@vectranetworks.com>
Cc: Jochen Henneberg <jh@henneberg-systemdesign.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Tested-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Tested-by: Chris J Arges <christopherarges@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-06 02:18:51 -08:00
Cao jin
629823b872 igb: use igb_adapter->io_addr instead of e1000_hw->hw_addr
When running as guest, under certain condition, it will oops as following.
writel() in igb_configure_tx_ring() results in oops, because hw->hw_addr
is NULL. While other register access won't oops kernel because they use
wr32/rd32 which have a defense against NULL pointer.

    [  141.225449] pcieport 0000:00:1c.0: AER: Multiple Uncorrected (Fatal)
    error received: id=0101
    [  141.225523] igb 0000:01:00.1: PCIe Bus Error:
    severity=Uncorrected (Fatal), type=Unaccessible,
    id=0101(Unregistered Agent ID)
    [  141.299442] igb 0000:01:00.1: broadcast error_detected message
    [  141.300539] igb 0000:01:00.0 enp1s0f0: PCIe link lost, device now
    detached
    [  141.351019] igb 0000:01:00.1 enp1s0f1: PCIe link lost, device now
    detached
    [  143.465904] pcieport 0000:00:1c.0: Root Port link has been reset
    [  143.465994] igb 0000:01:00.1: broadcast slot_reset message
    [  143.466039] igb 0000:01:00.0: enabling device (0000 -> 0002)
    [  144.389078] igb 0000:01:00.1: enabling device (0000 -> 0002)
    [  145.312078] igb 0000:01:00.1: broadcast resume message
    [  145.322211] BUG: unable to handle kernel paging request at
    0000000000003818
    [  145.361275] IP: [<ffffffffa02fd38d>]
    igb_configure_tx_ring+0x14d/0x280 [igb]
    [  145.400048] PGD 0
    [  145.438007] Oops: 0002 [#1] SMP

A similar issue & solution could be found at:
    http://patchwork.ozlabs.org/patch/689592/

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-06 02:18:50 -08:00
Chris J Arges
4e684f59d7 igb: Workaround for igb i210 firmware issue
Sometimes firmware may not properly initialize I347AT4_PAGE_SELECT causing
the probe of an igb i210 NIC to fail. This patch adds an addition zeroing
of this register during igb_get_phy_id to workaround this issue.

Thanks for Jochen Henneberg for the idea and original patch.

Signed-off-by: Chris J Arges <christopherarges@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-06 02:18:50 -08:00
Cao jin
c4f9b6e578 igb: correct register comments
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-06 02:18:50 -08:00
khalidm
7e54d9d063 e1000e: driver trying to free already-free irq
During systemd reboot sequence network driver interface is shutdown
by e1000_close. The PCI driver interface is shut by e1000_shutdown.
The e1000_shutdown checks for netif_running status, if still up it
brings down driver. But it disables msi outside of this if statement,
regardless of netif status. All this is OK when e1000_close happens
after shutdown. However, by default, everything in systemd is done
in parallel. This creates a conditions where e1000_shutdown is called
after e1000_close, therefore hitting BUG_ON assert in free_msi_irqs.

CC: xe-kernel@external.cisco.com
Signed-off-by: khalidm <khalidm@cisco.com>
Signed-off-by: David Singleton <davsingl@cisco.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-06 02:18:49 -08:00
Joe Perches
030ec9e682 igb: Realign bad indentation
Statements should start on tabstops.

Use a single statement and test instead of multiple tests.

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-06 02:18:49 -08:00
Volodymyr Bendiuga
56b46b4378 net:mv88e6xxx: use g2 interrupt for 6097 chip
This chip needs MV88E6XXX_FLAG_G2_INT

Signed-off-by: Volodymyr Bendiuga <volodymyr.bendiuga@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-05 11:38:43 -05:00
Tobias Klauser
60f9b5e806 net: xilinx: emaclite: Remove xemaclite_remove_ndev()
xemaclite_remove_ndev() is a simple wrapper around free_netdev()
checking for NULL before the call. All possible paths calling
it are guaranteed to pass a non-NULL argument, so rather call
free_netdev() directly.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-05 11:29:22 -05:00
Tobias Klauser
aa884a26a1 net: ethoc: Remove unused members from struct ethoc
The io_region_size and dma_alloc members of struct ethoc are only
written but never read, so they might as well be removed.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-05 11:26:59 -05:00
Zhu Yanjun
9b60047a9c r8169: fix the typo in the comment
>From the realtek data sheet, the PID0 should be bit 0.

Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-05 11:24:48 -05:00
David S. Miller
76eb75be79 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-01-05 11:03:07 -05:00
Andrew Lunn
5952758101 dsa: mv88e6xxx: Optimise atu_get
Lookup in the ATU can be performed starting from a given MAC
address. This is faster than starting with the first possible MAC
address and iterating all entries.

Entries are returned in numeric order. So if the MAC address returned
is bigger than what we are searching for, we know it is not in the
ATU.

Using the benchmark provided by Volodymyr Bendiuga
<volodymyr.bendiuga@gmail.com>,

https://www.spinics.net/lists/netdev/msg411550.html

on an Marvell Armada 370 RD, the test to add a number of static fdb
entries went from 1.616531 seconds to 0.312052 seconds.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 16:34:34 -05:00
Sergei Shtylyov
71eae1ca77 sh_eth: enable RX descriptor word 0 shift on SH7734
The RX descriptor word 0 on SH7734 has the RFS[9:0] field in bits 16-25
(bits  0-15 usually used for that are occupied by the packet checksum).
Thus  we need to set the 'shift_rd0'  field in the SH7734 SoC data...

Fixes: f0e81fecd4 ("net: sh_eth: Add support SH7734")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 16:12:14 -05:00
Edward Cree
4fdda95893 sfc: don't report RX hash keys to ethtool when RSS wasn't enabled
If we failed to set up RSS on EF10 (e.g. because firmware declared
 RX_RSS_LIMITED), ethtool --show-nfc $dev rx-flow-hash ... should report
 no fields, rather than confusingly reporting what fields we _would_ be
 hashing on if RSS was working.

Fixes: dcb4123cbe ("sfc: disable RSS when unsupported")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 14:18:19 -05:00
Arjun V
8eb9f2f9e4 cxgb4: Support compressed error vector for T6
t6fw-1.15.15.0 enabled compressed error vector in cpl_rx_pkt for T6.
Updating driver to take care of these changes.

Signed-off-by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Arjun V <arjun@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 14:01:53 -05:00
Sergei Shtylyov
9b39f05ce8 sh_eth: factor out sh_eth_emac_interrupt()
The E-MAC interrupt (EESR.ECI) is not always caused  by an error condition,
so  it really shouldn't be handled by sh_eth_error(). Factor out the E-MAC
interrupt handler, sh_eth_emac_interrupt(),  removing the ECI bit from the
EESR's values throughout the driver...

Update Cogent Embedded's copyright and clean up the whitespace in Renesas'
copyright, while at it...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 13:47:55 -05:00
Sergei Shtylyov
1940f24076 sh_eth: no need for *else* after *goto*
Well, checkpatch.pl complains about *else* after *return* and *break* but
not after *goto*... and it probably should have complained about the code
in sh_eth_error().  Win couple LoCs by removing that *else*. :-)

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 13:47:54 -05:00
Sergei Shtylyov
4063469971 sh_eth: handle only enabled E-MAC interrupts
The driver should only handle the enabled E-MAC interrupts, like it does
for the E-DMAC interrupts since commit 3893b27345 ("sh_eth: workaround
for spurious ECI interrupt"),  so mask ECSR with  ECSIPR when reading it
in sh_eth_error().

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 13:47:54 -05:00
Roy Pledge
0fbb0f24dd dpaa_eth: Initialize CGR structure before init
The QBMan CGR options needs to be zeroed before calling the init
function

Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 13:45:09 -05:00
Madalin Bucur
3fe61f0940 dpaa_eth: cleanup after init_phy() failure
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 13:45:08 -05:00
Florian Fainelli
38e5a85562 net: systemport: Pad packet before inserting TSB
Inserting the TSB means adding an extra 8 bytes in front the of packet
that is going to be used as metadata information by the TDMA engine, but
stripped off, so it does not really help with the packet padding.

For some odd packet sizes that fall below the 60 bytes payload (e.g: ARP)
we can end-up padding them after the TSB insertion, thus making them 64
bytes, but with the TDMA stripping off the first 8 bytes, they could
still be smaller than 64 bytes which is required to ingress the switch.

Fix this by swapping the padding and TSB insertion, guaranteeing that
the packets have the right sizes.

Fixes: 80105befdb ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 13:33:29 -05:00
Florian Fainelli
bb7da333d0 net: systemport: Utilize skb_put_padto()
Since we need to pad our packets, utilize skb_put_padto() which
increases skb->len by how much we need to pad, allowing us to eliminate
the test on skb->len right below.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 13:33:28 -05:00
Mahesh Bandewar
009146d117 ipvlan: assign unique dev-id for each slave device.
IPvlan setup uses one mac-address (of master). The IPv6 link-local
addresses are derived using the mac-address on the link. Lack of
dev-ids makes these link-local addresses same for all slaves including
that of master device. dev-ids are necessary to add differentiation
when L2 address is shared.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 13:30:42 -05:00
Prasad Kanneganti
9feb16ae0b liquidio: remove PTP support in 23XX adapters
liquidio driver incorrectly indicates that PTP is supported in 23XX
adapters; this patch fixes that.  PTP is supported in 66XX and 68XX
adapters, and the driver correctly indicates that.

Signed-off-by: Prasad Kanneganti <prasad.kanneganti@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 13:28:27 -05:00
Nicolas Pitre
cd7aeb1f97 LiquidIO VF: s/select/imply/ for PTP_1588_CLOCK
Fix a minor fallout from the merge of the timers and the networking
trees. The following error may result if the PTP_1588_CLOCK
prerequisites are not available:

drivers/built-in.o: In function `ptp_clock_unregister':
(.text+0x40e0a5): undefined reference to `pps_unregister_source'
drivers/built-in.o: In function `ptp_clock_unregister':
(.text+0x40e0cc): undefined reference to `posix_clock_unregister'
drivers/built-in.o: In function `ptp_clock_event':
(.text+0x40e249): undefined reference to `pps_event'
drivers/built-in.o: In function `ptp_clock_register':
(.text+0x40e5e1): undefined reference to `pps_register_source'
drivers/built-in.o: In function `ptp_clock_register':
(.text+0x40e62c): undefined reference to `posix_clock_register'
drivers/built-in.o: In function `ptp_clock_register':
(.text+0x40e68d): undefined reference to `pps_unregister_source'

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 13:27:16 -05:00
Varun Prakash
a9a8cdb368 libcxgb: fix error check for ip6_route_output()
ip6_route_output() never returns NULL so
check dst->error instead of !dst.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 13:25:53 -05:00
Peter Chen
63dfb0dac9 net: usb: asix_devices: add .reset_resume for USB PM
The USB core may call reset_resume when it fails to resume asix device.
And USB core can recovery this abnormal resume at low level driver,
the same .resume at asix driver can work too. Add .reset_resume can
avoid disconnecting after backing from system resume, and NFS can
still be mounted after this commit.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04 13:03:08 -05:00
David Ahern
926d93a33e net: vrf: Add missing Rx counters
The move from rx-handler to L3 receive handler inadvertantly dropped the
rx counters. Restore them.

Fixes: 74b20582ac ("net: l3mdev: Add hook in ip and ipv6")
Reported-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03 18:51:40 -05:00
Don Skidmore
07eea570ac ixgbe: Add PF support for VF promiscuous mode
This patch extends the xcast mailbox message to include support for
unicast promiscuous mode.  To allow a VF to enter this mode the PF
must be in promiscuous mode.

A later patch will add the support needed in the VF driver (ixgbevf)

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:40 -08:00
Don Skidmore
41e544cdad ixgbevf: Add support for VF promiscuous mode
This patch extends the mailbox message to allow for VF promiscuous
mode support.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:40 -08:00
Mark Rustad
b3eb4e1860 ixgbe: Implement support for firmware-controlled PHYs
Implement support for devices that have firmware-controlled PHYs.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:39 -08:00
Mark Rustad
12c78ef098 ixgbe: Implement firmware interface to access some PHYs
Implement new interface for firmware commands to access some PHYs.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:39 -08:00
Mark Rustad
d2a10ae72e ixgbe: Remove unused firmware version functions and method
The firmware version method and functions are not used anywhere, so
remove them all.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:38 -08:00
Mark Rustad
3efa9ed260 ixgbe: Fix issues with EEPROM access
There are two problems with EEPROM access. One is that it needs to
hold the semaphore until the entire response is read or else the
response can be corrupted by other firmware accesses. The second
problem is that acquiring and releasing the semaphore is slow, so
it should be taken and released once when multiple EEPROM accesses
will be done.

Both of these issues can be solved by adding a new function,
ixgbe_hic_unlocked, to issue firmware commands that will assume
that the caller has acquired the needed semaphore.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:38 -08:00
Don Skidmore
54f6d4c424 ixgbe: Configure advertised speeds correctly for KR/KX backplane
This patch ensures that the advertised link speeds are configured
for X553 KR/KX backplane.  Without this patch the link remains at
1G when resuming from low power after being downshifted by LPLU.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:38 -08:00
Emil Tantilov
26403b7fde ixgbevf: restore hw_addr on resume or error
Restore adapter->hw.hw_addr after handling an error, or a resume
operation to make sure we can access the registers.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:38 -08:00
Yusuke Suzuki
aeb4c73100 ixgbe: Fix incorrect bitwise operations of PTP Rx timestamp flags
Rx timestamp does not work on 82599 and X540 because bitwise operation
of RX_HWTSTAMP flags is incorrect and ixgbe_ptp_rx_hwtstamp() is never
called. This patch fixes it to enable Rx timestamp on 82599 and X540.

Without this fix:
ptp4l[278.730]: selected /dev/ptp8 as PTP clock
ptp4l[278.733]: port 1: INITIALIZING to LISTENING on INITIALIZE
ptp4l[278.733]: port 0: INITIALIZING to LISTENING on INITIALIZE
ptp4l[278.834]: port 1: received SYNC without timestamp
ptp4l[278.835]: port 1: new foreign master 1c3947.fffe.60f9cc-1
ptp4l[279.834]: port 1: received SYNC without timestamp
ptp4l[280.834]: port 1: received SYNC without timestamp
ptp4l[281.834]: port 1: received SYNC without timestamp
ptp4l[282.834]: port 1: received SYNC without timestamp
ptp4l[282.835]: selected best master clock 1c3947.fffe.60f9cc
ptp4l[282.835]: port 1: LISTENING to UNCALIBRATED on RS_SLAVE
ptp4l[283.834]: port 1: received SYNC without timestamp

With this fix:
ptp4l[239.154]: selected /dev/ptp8 as PTP clock
ptp4l[239.157]: port 1: INITIALIZING to LISTENING on INITIALIZE
ptp4l[239.157]: port 0: INITIALIZING to LISTENING on INITIALIZE
ptp4l[240.989]: port 1: new foreign master 1c3947.fffe.60f9cc-1
ptp4l[244.989]: selected best master clock 1c3947.fffe.60f9cc
ptp4l[244.989]: port 1: LISTENING to UNCALIBRATED on RS_SLAVE
ptp4l[246.977]: master offset -899583339542096 s0 freq      +0 path delay     16222
ptp4l[247.977]: master offset -899583339617265 s1 freq  -75169 path delay     16177
ptp4l[248.977]: master offset       -130 s2 freq  -75299 path delay     16177
ptp4l[248.977]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED
ptp4l[249.977]: master offset         -9 s2 freq  -75217 path delay     16177
ptp4l[250.977]: master offset         88 s2 freq  -75123 path delay     16132

Fixes: a9763f3cb5 ("ixgbe: Update PTP to support X550EM_x devices")
Signed-off-by: Yusuke Suzuki <yus-suzuki@uf.jp.nec.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:37 -08:00
Emil Tantilov
b19cf6eea9 ixgbevf: fix AER error handling
Make sure that we free the IRQs in ixgbevf_io_error_detected() when
responding to an PCIe AER error and also restore them when the
interface recovers from it.

Previously it was possible to trigger BUG_ON() check in free_msix_irqs()
in the case where we call ixgbevf_remove() after a failed recovery from
AER error because the interrupts were not freed.

Also moved the down and free functions into ixgbevf_close_suspend()
same as with ixgbe.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:37 -08:00
Emil Tantilov
126db13fa0 ixgbe: fix AER error handling
Make sure that we free the IRQs in ixgbe_io_error_detected() when
responding to an PCIe AER error and also restore them when the
interface recovers from it.

Previously it was possible to trigger BUG_ON() check in free_msix_irqs()
in the case where we call ixgbe_remove() after a failed recovery from
AER error because the interrupts were not freed.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:37 -08:00
Ken Cox
a9d2d53a78 ixgbe: test for trust in macvlan adjustments for VF
There are two methods for setting mac addresses in a Macvlan, that
differentiate themselves in the function macvlan_set_mac_Address.
If the macvlan mode is passthru, then we use the dev_set_mac_address
method, otherwise we use the dev_uc api via macvlan_sync_addresses.
The latter method (which would stem from using any non-passthru mode,
like bridge, or vepa), calls down into the driver in a path that terminates
in ixgbevf_set_uc_addr_vf, which sends a IXGBE_VF_SET_MACVLAN message,
which causes the pf to spawn the noted error message.  This occurs because
it appears that the guest is trying to delete the mac address of the macvlan
before adding another.

The other path in macvlan_set_mac_address uses dev_set_mac_address, which
calls into ixgbevf_set_mac which uses the IXGBE_VF_SET_MAC_ADDR to the
pf to set the macvlan mac address.

The discrepancy here is in the handlers.  The handler function for
IXGBE_VF_SET_MAC_ADDR (ixgbe_set_vf_mac_addr) has a check for
the vfinfo[].trusted bit to allow the operation if the vf is trusted.
In comparison, the IXGBE_VF_SET_MACVLAN message handler
(ixgbe_set_vf_macvlan_msg) has no such check of the trusted bit.

Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:36 -08:00
Emil Tantilov
2dad7b2775 ixgbevf: handle race between close and suspend on shutdown
When an interface is part of a namespace it is possible that
ixgbevf_close() may be called while ixgbevf_suspend() is running
which ends up in a double free WARN and/or a BUG in free_msi_irqs()

To handle this situation we extend the rtnl_lock() to protect the
call to netif_device_detach() and check for !netif_device_present()
to avoid entering close while in suspend.

Also added rtnl locks to ixgbevf_queue_reset_subtask().

CC: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:36 -08:00
Emil Tantilov
f7f37e7ff2 ixgbe: handle close/suspend race with netif_device_detach/present
When an interface is part of a namespace it is possible that
ixgbe_close() may be called while __ixgbe_shutdown() is running
which ends up in a double free WARN and/or a BUG in free_msi_irqs().

To handle this situation we extend the rtnl_lock() to protect the
call to netif_device_detach() and ixgbe_clear_interrupt_scheme()
in __ixgbe_shutdown() and check for netif_device_present()
to avoid clearing the interrupts second time in ixgbe_close();

Also extend the rtnl lock in ixgbe_resume() to netif_device_attach().

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:36 -08:00
Tony Nguyen
f215266470 ixgbe: Fix reporting of 100Mb capability
BaseT adapters that are capable of supporting 100Mb are not reporting this
capability.  This patch corrects the reporting so that 100Mb is shown as
supported on those adapters.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:35 -08:00
Tony Nguyen
3f0d646b72 ixgbe: Reduce I2C retry count on X550 devices
A retry count of 10 is likely to run into problems on X550 devices that
have to detect and reset unresponsive CS4227 devices. So, reduce the I2C
retry count to 3 for X550 and above. This should avoid any possible
regressions in existing devices.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:35 -08:00
Tony Nguyen
910c9c0f59 ixgbe: Add bounds check for x540 LED functions
This is an extension of commit 003287e0f0 ("ixgbevf: Correct parameter
sent to LED function"); add bounds checking to x540 functions to ensure the
index is valid.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:35 -08:00
Emil Tantilov
2bf1a87b90 ixgbe: add mask for 64 RSS queues
The indirection table was reported incorrectly for X550 and newer
where we can support up to 64 RSS queues.

Reported-by Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:34 -08:00
Tony Nguyen
5c092749e3 ixgbe: Fix check for ixgbe_phy_x550em_ext_t reset
The generic PHY reset check we had previously is not sufficient for the
ixgbe_phy_x550em_ext_t PHY type.  Check 1.CC02.0 instead - same as
ixgbe_init_ext_t_x550().

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:34 -08:00
Tony Nguyen
cb8e051446 ixgbe: Report driver version to firmware for x550 devices
Some x550 devices require the driver version reported to its firmware; this
patch sends the driver version string to the firmware through the host
interface command for x550 devices.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:34 -08:00
Emil Tantilov
1fe954b209 ixgbe: do not disable FEC from the driver
FEC is configured by the NVM and the driver should not be
overriding it.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03 13:03:33 -08:00
Sabrina Dubroca
096de2f83e benet: stricter vxlan offloading check in be_features_check
When VXLAN offloading is enabled, be_features_check() tries to check if
an encapsulated packet is indeed a VXLAN packet. The check is not strict
enough, and considers any UDP-encapsulated ethernet frame with a 8-byte
tunnel header as being VXLAN. Unfortunately, both GENEVE and VXLAN-GPE
have a 8-byte header, so they get through this check.

Force the UDP destination port to be the one that has been offloaded to
hardware.

Without this, GENEVE-encapsulated packets can end up having an incorrect
checksum when both a GENEVE and a VXLAN (offloaded) tunnel are
configured.

This is similar to commit a547224dce ("mlx4e: Do not attempt to
offload VXLAN ports that are unrecognized").

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03 10:58:43 -05:00
Edward Cree
e7072f6669 sfc-falcon: declare module version (same as ethtool drvinfo version)
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03 10:54:40 -05:00
Edward Cree
14077e9ed3 sfc: declare module version (same as ethtool drvinfo version)
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03 10:54:15 -05:00
Volodymyr Bendiuga
07b76ba9f8 dsa:mv88e6xxx: allow address 0x1 in smi_init
Some devices, such as the mv88e6097 do have ADDR[0] external and so it
is possible to configure the device to use SMI address 0x1. Remove the
restriction, as there are boards using this address.

Signed-off-by: Volodymyr Bendiuga <volodymyr.bendiuga@westermo.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03 10:01:58 -05:00
Philippe Reynes
28fa4f308e net: freescale: dpaa: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03 09:49:35 -05:00
Bartosz Folta
515028fe29 net: macb: Updated resource allocation function calls to new version of API.
Changed function calls of resource allocation to new API. Changed way
of setting DMA mask. Removed unnecessary sanity check.
This patch is sent in regard to recently applied patch
Commit 83a77e9ec4
net: macb: Added PCI wrapper for Platform Driver.

Signed-off-by: Bartosz Folta <bfolta@cadence.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03 09:35:42 -05:00
Johan Hovold
a8de4d719d net: stmmac: dwmac-oxnas: use generic pm implementation
Now that we have an exit callback in place, add init as well and get rid
of the custom PM callbacks in favour of the generic ones.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03 09:33:00 -05:00
Johan Hovold
6b4c212b95 net: stmmac: dwmac-oxnas: fix fixed-link-phydev leaks
Make sure to deregister and free any fixed-link phy registered during
probe on probe errors and on driver unbind by calling the new glue
helper function.

For driver unbind, use the generic stmmac-platform remove implementation
and add an exit callback to disable the clock.

Fixes: 5ed7414062 ("net: stmmac: Add OXNAS Glue Driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03 09:33:00 -05:00
Johan Hovold
8f87e626b0 net: stmmac: dwmac-oxnas: fix of-node leak
Use the syscon lookup-by-phandle helper so that the reference taken by
of_parse_phandle() is released when done with the node.

Fixes: 5ed7414062 ("net: stmmac: Add OXNAS Glue Driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03 09:33:00 -05:00
Philippe Reynes
0a0a8d6b0e net: fealnx: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 16:59:10 -05:00
Philippe Reynes
9da12b6454 net: faraday: ftmac100: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 16:59:10 -05:00
Philippe Reynes
fd90095db5 net: emulex: benet: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 16:59:10 -05:00
Philippe Reynes
88c513d478 net: dlink: sundance: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 16:59:10 -05:00
Philippe Reynes
9022255006 net: dlink: dl2k: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

The previous implementation of set_settings was modifying
the value of speed and duplex, but with the new API, it's not
possible. The structure ethtool_link_ksettings is defined
as const.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 16:59:10 -05:00
Philippe Reynes
453e5f3dfc net: dec: winbond-840: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 16:59:10 -05:00
Philippe Reynes
6711a87a9b net: dec: uli526x: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 16:59:10 -05:00
Philippe Reynes
41a65f7040 net: dec: de2104x: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 16:59:10 -05:00
Philippe Reynes
e938ed150f net: sfc: falcon: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 16:59:10 -05:00
Philippe Reynes
8e4881aa1d net: mdio: add mdio45_ethtool_ksettings_get
There is a function in mdio for the old ethtool api gset.
We add a new function mdio45_ethtool_ksettings_get for the
new ethtool api glinksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 16:59:10 -05:00
Artemy Kovalyov
d9aaed8387 {net,IB}/mlx5: Refactor page fault handling
* Update page fault event according to last specification.
* Separate code path for page fault EQ, completion EQ and async EQ.
* Move page fault handling work queue from mlx5_ib static variable
  into mlx5_core page fault EQ.
* Allocate memory to store ODP event dynamically as the
  events arrive, since in atomic context - use mempool.
* Make mlx5_ib page fault handler run in process context.

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 15:51:20 -05:00
Artemy Kovalyov
223cdc7242 net/mlx5: Update PAGE_FAULT_RESUME layout
Update PAGE_FAULT_RESUME command layout.

Three bit fields describing page fault: rdma, rdma_write, req_res gave 8
possible combinations, while only a few were legal. Now they
are interpreted as three-bit type field, where former legal
combinations turns into corresponding types and unused were added as new
types.

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 15:51:20 -05:00
Artemy Kovalyov
7d0cc6edcc IB/mlx5: Add MR cache for large UMR regions
In this change we turn mlx5_ib_update_mtt() into generic
mlx5_ib_update_xlt() to perfrom HCA translation table modifiactions
supporting both atomic and process contexts and not limited by number
of modified entries.
Using this function we increase preallocated MRs up to 16GB.

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 15:51:20 -05:00
Artemy Kovalyov
3161625589 IB/mlx5: Refactor UMR post send format
* Update struct mlx5_wqe_umr_ctrl_seg.
* Currenlty UMR send_flags aim only certain use cases: enabled/disable
  cached MR, modifying XLT for ODP. By making flags independent make UMR
  more flexible allowing arbitrary manipulations.
* Since different UMR formats have different entry sizes UMR request
  should receive exact size of translation table update instead of
  number of entries. Rename field npages to xlt_size in struct mlx5_umr_wr
  and update relevant code accordingly.
* Add support of length64 bit.

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 15:51:20 -05:00
David S. Miller
85eb018fec wireless-drivers-next patches for 4.11
The most notable change here is the inclusion of airtime fairness
 scheduling to ath9k. It prevents slow clients from hogging all the
 airtime and unfairly slowing down faster clients.
 
 Otherwise smaller changes and cleanup.
 
 Major changes:
 
 ath9k
 
 * cleanup eeprom endian handling
 * add airtime fairness scheduling
 
 ath10k
 
 * fix issues for new QCA9377 firmware version
 * support dev_coredump() for firmware crash dump
 * enable channel 169 on 5 GHz band
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJYalDTAAoJEG4XJFUm622ba2EH/ivoHG9CvmT6HgNw77odDr6b
 Zc7plDi2dd9LIzp3rF/9j8Ietfzpu31Pp9Qz0o1Su/s8RJIlXKVF5UeG5IignnEG
 02rv7Z+BGPW7SUNDb0cLa27PMYqUAh8vI39sxYSdQ9NQLIlpMLIxxx5iOZyAK5eV
 HBRS0pVlSxbAntb1JgWiN/LjjXe/PdhX3CR/b9b468KAcWB6UWj9nXQxFmz7d3uM
 dH3buDTgwaq7K24ZAFc1BsD7rgxprpauXxgIMWCKxRERf64WFfYkYdfdCER+PSPH
 maV5Te1KzTJBrQHDOPs1ezVe8gDUhb5YE4BJY9SppZpOE1arucq2g3+3obQUeHE=
 =DAVq
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2017-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.11

The most notable change here is the inclusion of airtime fairness
scheduling to ath9k. It prevents slow clients from hogging all the
airtime and unfairly slowing down faster clients.

Otherwise smaller changes and cleanup.

Major changes:

ath9k

* cleanup eeprom endian handling
* add airtime fairness scheduling

ath10k

* fix issues for new QCA9377 firmware version
* support dev_coredump() for firmware crash dump
* enable channel 169 on 5 GHz band
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 15:23:34 -05:00
Niklas Cassel
31b95c9bdc net: stmmac: remove unused duplicate property snps,axi_all
For core revision 3.x Address-Aligned Beats is available in two registers.
The DT property snps,aal was created for AAL in the DMA bus register,
which is a read/write bit.
The DT property snps,axi_all was created for AXI_AAL in the AXI bus mode
register, which is a read only bit that reflects the value of AAL in the
DMA bus register.

Since the value of snps,axi_all is never used in the driver,
and since the property was created for a bit that is read only,
it should be safe to remove the property.

Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02 12:30:26 -05:00
Mintz, Yuval
ce742922ac qed*: Advance driver versions to 8.10.10.20.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 21:02:14 -05:00
Ram Amrani
1fe582ecad qed: Conserve RDMA resources when !QEDR
If qedr isn't part of the kernel then don't allocate RDMA resources
for it in qed.

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 21:02:14 -05:00
Mintz, Yuval
8806787609 qed: Support Multicast on Tx-switching
Currently multicast traffic wouldn't be routed internally to
listener; Instead it would only be sent to network via the
physical carrier.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 21:02:14 -05:00
Mintz, Yuval
f990c82c38 qed*: Add support for ndo_set_vf_trust
Trusted VFs would be allowed to receive promiscuous and
multicast promiscuous data.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 21:02:14 -05:00
Mintz, Yuval
f29ffdb65f qed*: RSS indirection based on queue-handles
A step toward having qede agnostic to the queue configurations
in firmware/hardware - let the RSS indirections use queue handles
instead of actual queue indices.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 21:02:14 -05:00
Mintz, Yuval
04e0fd006a qede: Remove unnecessary datapath dereference
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 21:02:14 -05:00
Manish Chopra
7ca547bdb0 qede - mark SKB as encapsulated
When driver receives a recognized encapsulated packet it needs
to set the skb->encapsulation field as well.

Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 21:02:14 -05:00
Mintz, Yuval
e3eef7ee02 qede: Postpone reallocation until NAPI end
During Rx flow driver allocates a replacement buffer each time
it consumes an Rx buffer. Failing to do so, it would consume the
currently processed buffer and re-post it on the ring.
As a result, the Rx ring is always completely full [from driver POV].

We now allow the Rx ring to shorten by doing the re-allocations
at the end of the NAPI run. The only limitation is that we still want to
make sure each time we reallocate that we'd still have sufficient
elements in the Rx ring to guarantee that FW would be able to post
additional data and trigger an interrupt.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 21:02:14 -05:00
Mintz, Yuval
e1d32acbcb qed*: Change maximal number of queues
Today qede requests contexts that would suffice for 64 'whole'
combined queues [192 meant for 64 rx, tx and xdp tx queues],
but registers netdev and limits the number of queues based on
information received by qed. In turn, qed doesn't take context
into account when informing qede how many queues it can support.

This would lead to a configuration problem in case user tries
configuring >64 combined queues to interface [or >96 in case
xdp isn't enabled]. Since we don't have a mangement firware
that actually provides so many interrupt lines to a single
device we're currently safe but that's about to change soon.

The new maximum is hence changed:
  - For RoCE devices, the limit would remain 64.
  - For non-RoCE devices, the limit might be higher [depending
    on the actual configuration of the device].
qed would start enforcing that limit in both scenarios.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 21:02:14 -05:00
Mintz, Yuval
aed284c7f0 qede: Split filtering logic to its own file
This takes the various filtering logic of the driver and
moves them into their own dedicated file - qede_filter.c.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 21:02:14 -05:00
Mintz, Yuval
cdda926d40 qede: Break datapath logic into its own file
This adds a new file qede_fp.c and relocates the datapath-related
logic into it [from qede_main.c].

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 21:02:14 -05:00
Mintz, Yuval
e8f1cb507d qed*: Update to dual-license
Since the submission of the qedr driver, there's inconsistency
in the licensing of the various qed/qede files - some are GPLv2
and some are dual-license.
Since qedr requires dual-license and it's dependent on both,
we're updating the licensing of all qed/qede source files.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 21:02:14 -05:00
Colin Ian King
e16e558e83 rtlwifi: fix spelling mistake: "encrypiton" -> "encryption"
trivial fix to spelling mistake in RT_TRACE message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-01 20:54:33 +02:00
Colin Ian King
a60db8e703 wlcore: fix spelling mistake in wl1271_warning
trivial fix to spelling mistake of function name in wl1271_warning,
should be dynamic_ps_timeout instead of dyanmic_ps_timeout.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-01 20:53:44 +02:00
Kalle Valo
50913e32c6 Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
ath.git patches for 4.11. Major changes:

ath9k

* cleanup eeprom endian handling
* add airtime fairness scheduling

ath10k

* fix issues for new QCA9377 firmware version
* support dev_coredump() for firmware crash dump
* enable channel 169 on 5 GHz band
2017-01-01 20:48:37 +02:00
Thomas Preisner
6b6bbb5922 net: 3com: typhoon: typhoon_init_one: make return values more specific
In some cases the return value of a failing function is not being used
and the function typhoon_init_one() returns another negative error code
instead.

Signed-off-by: Thomas Preisner <thomas.preisner+linux@fau.de>
Signed-off-by: Milan Stephan <milan.stephan+linux@fau.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-30 15:26:22 -05:00
Thomas Preisner
107fded7bf net: 3com: typhoon: typhoon_init_one: fix incorrect return values
In a few cases the err-variable is not set to a negative error code if a
function call in typhoon_init_one() fails and thus 0 is returned
instead.
It may be better to set err to the appropriate negative error
code before returning.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188841

Reported-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Thomas Preisner <thomas.preisner+linux@fau.de>
Signed-off-by: Milan Stephan <milan.stephan+linux@fau.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-30 15:26:22 -05:00
Colin Ian King
ad334bbb07 brcmfmac: fix spelling mistakes on "Ivalid"
Trivial fixes to spelling mistake "Ivalid" to "Invalid" in
brcmf_err error messages.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:59:26 +02:00
Colin Ian King
3b1fc7680a rtlwifi: fix spelling mistake: "contry" -> "country"
trivial fix to spelling mistake in RT_TRACE message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:57:25 +02:00
Ping-Ke Shih
40b368af4b rtlwifi: Fix alignment issues
The addresses of Wlan NIC registers are natural alignment, but some
drivers have bugs. These are evident on platforms that need natural
alignment to access registers.  This change contains the following:
 1. Function _rtl8821ae_dbi_read() is used to read one byte from DBI,
    thus it should use rtl_read_byte().
 2. Register 0x4C7 of 8192ee is single byte.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:56:53 +02:00
Bhumika Goyal
26eb994d52 libertas: constify cfg80211_ops structures
cfg80211_ops structures are only passed as an argument to the function
wiphy_new. This argument is of type const, so cfg80211_ops strutures
having this property can be declared as const.
Done using Coccinelle

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct cfg80211_ops i@p = {...};

@ok1@
identifier r1.i;
position p;
@@
wiphy_new(&i@p,...)

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct cfg80211_ops i;

File size before:
   text	   data	    bss	    dec	    hex	filename
  21225	   1954	     16	  23195	   5a9b	wireless/marvell/libertas/cfg.o

File size after:
   text	   data	    bss	    dec	    hex	filename
  22041	   1154	     16	  23211	   5aab	wireless/marvell/libertas/cfg.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:56:07 +02:00
Larry Finger
c93ac39da0 rtlwifi: Remove some redundant code
The symbol DBG_EMERG is no longer used and is removed.

In a number of places, the code has redundant messages. For example, if
the failure for the firmware to run is logged, it is not necessary to
log that the firmware has been started. In addition, extraneous braces are
removed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:28 +02:00
Larry Finger
02527a73be rtlwifi: rtl8188ee: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:27 +02:00
Larry Finger
0fc30e9350 rtlwifi: rtl8192c-common: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:26 +02:00
Larry Finger
e40a005652 rtlwifi: rtl8192ce: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:26 +02:00
Larry Finger
c38af3f06a rtlwifi: rtl8192cu: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:25 +02:00
Larry Finger
b8c79f4548 rtlwifi: rtl8192de: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:24 +02:00
Larry Finger
2d15acac23 rtlwifi: rtl8192se: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:24 +02:00
Larry Finger
c7532b8765 rtlwifi: rtl8723-common: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:23 +02:00
Larry Finger
a44f59d603 rtlwifi: rtl8192ee: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:22 +02:00
Larry Finger
a67005bc46 rtlwifi: rtl8723ae: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:22 +02:00
Larry Finger
4e2b4378f9 rtlwifi: rtl8723be: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:21 +02:00
Larry Finger
004a1e1679 rtlwifi: rtl8821ae: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:20 +02:00
Larry Finger
b03d968b66 rtlwifi: Remove RT_TRACE messages that use DBG_EMERG
These messages are always logged and represent error conditions, thus
we can use pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:20 +02:00
Larry Finger
531940f964 rtlwifi: Replace local debug macro RT_ASSERT
This macro can be replaced with WARN_ONCE. In addition to using a
standard debugging macro for these critical errors, we also get
a stack dump.

In rtl8821ae/hw.c, a senseless comment was removed, and an incorrect
indentation was fixed.

This patch also fixes two places in each of rtl8192ee, rtl8723be,
and rtl8821ae where the logical condition was incorrect.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 15:54:19 +02:00
Stanislaw Gruszka
c7d1c77781 rt2x00: add mutex to synchronize config and link tuner
Do not perform mac80211 config and link_tuner at the same time,
this can possibly result in wrong RF or BBP configuration.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30 14:03:41 +02:00