Fix the warning: [-Werror=-Wframe-larger-than=]
drivers/usb/misc/usbtest.c: In function 'test_queue':
drivers/usb/misc/usbtest.c:2148:1:
warning: the frame size of 1232 bytes is larger than 1024 bytes
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Link: https://lore.kernel.org/r/ffa85702-86ab-48d7-4da2-2efcc94b05d3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Port starts to toggle when transitioning to unattached state.
This is incorrect while in BIST mode.
6.4.3.1 BIST Carrier Mode
Upon receipt of a BIST Message, with a BIST Carrier Mode BIST Data Object,
the UUT Shall send out a continuous string of BMC encoded alternating "1"s
and “0”s. The UUT Shall exit the Continuous BIST Mode within
tBISTContMode of this Continuous BIST Mode being enabled(see
Section 6.6.7.2).
6.4.3.2 BIST Test Data
Upon receipt of a BIST Message, with a BIST Test Data BIST Data Object,
the UUT Shall return a GoodCRC Message and Shall enter a test mode in which
it sends no further Messages except for GoodCRC Messages in response to
received Messages. See Section 5.9.2 for the definition of the Test Data
Frame. The test Shall be ended by sending Hard Reset Signaling to reset the
UUT.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200716034128.1251728-3-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quoting from TCPCI spec:
"Setting this bit to 1 is intended to be used only when a USB compliance
tester is using USB BIST Test Data to test the PHY layer of the TCPC. The
TCPM should clear this bit when a disconnect is detected.
0: Normal Operation. Incoming messages enabled by RECEIVE_DETECT
passed to TCPM via Alert.
1: BIST Test Mode. Incoming messages enabled by RECEIVE_DETECT
result in GoodCRC response but may not be passed to the TCPM via
Alert."
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200716034128.1251728-2-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TCPM supports BIST carried mode. PD compliance tests require
BIST Test Data to be supported as well.
Introducing set_bist_data callback to signal tcpc driver for
configuring the port controller hardware to enable/disable
BIST Test Data mode.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200716034128.1251728-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When pmc_usb_mux_set() is invoked when a device is disconnected, a valid
scenario is for state->alt == NULL and state->mode == TYPEC_STATE_USB.
In such cases, if a pmc_usb_disconnect() has already been issued (from
either pmc_usb_set_orientation() when orientation ==
TYPEC_ORIENTATION_NONE, or pmc_usb_set_role() when role ==
USB_ROLE_NONE), a pmc_usb_connect() will be issued despite no peripheral
being present.
This confuses the PMC and leads to all subsequent PMC IPC requests
returning errors due to timeout.
To prevent this, return early if the port orientation or role is already
set to none.
Cc: Benson Leung <bleung@chromium.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Rajmohan Mani <rajmohan.mani@intel.com>
Fixes: f3c1c41ebc ("usb: typec: intel_pmc_mux: Add support for USB4")
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20200709002441.1309189-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function quirks_param_set() takes as argument a const char* pointer
to the new value of the usbcore.quirks parameter. It then casts this
pointer to a non-const char* pointer and passes it to the strsep()
function, which overwrites the value.
Fix this by creating a copy of the value using kstrdup() and letting
that copy be written to by strsep().
Fixes: 027bd6cafd ("usb: core: Add "quirks" parameter for usbcore")
Signed-off-by: Kars Mulder <kerneldev@karsmulder.nl>
Link: https://lore.kernel.org/r/5ee2-5f048a00-21-618c5c00@230659773
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It appears that some platforms share same IRQ line between several devices,
some of which are EHCI and OHCI controllers. This is neither practical nor
performance-wise, especially in the case when they are supporting MSI.
In order to improve the situation try to allocate MSI and fallback to legacy
IRQ if no MSI available.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200702143045.23429-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba
laptop, it changed product ID to 0x9062 when entering QDL mode:
usb 2-4: new high-speed USB device number 78 using xhci_hcd
usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: EM7305
usb 2-4: Manufacturer: Sierra Wireless, Incorporated
The upgrade could complete after running
# echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id
qcserial 2-4:1.0: Qualcomm USB modem converter detected
usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0
Signed-off-by: Erik Ekman <erik@kryo.se>
Link: https://lore.kernel.org/r/20200717185118.3640219-1-erik@kryo.se
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
The set-led command is eight bytes long and starts with a command byte
followed by six bytes of RGB data and ends with a byte encoding a
frequency (see iuu_led() and iuu_rgbf_fill_buffer()).
The led activity helpers had a few long-standing bugs which corrupted
the command packets by inserting a second command byte and thereby
offsetting the RGB data and dropping the frequency in non-xmas mode.
In xmas mode, a related off-by-one error left the frequency field
uninitialised.
Fixes: 60a8fc0171 ("USB: add iuu_phoenix driver")
Reported-by: George Spelvin <lkml@sdf.org>
Link: https://lore.kernel.org/r/20200716085056.31471-1-johan@kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8UzA4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQ7cH/3v+Gv+SmHJCvaT2
CSu0+7okVnYbY3UTb3hykk7/aOqb6284KjxR03r0CWFzsEsZVhC5pvvruASSiMQg
Pi04sLqv6CsGLHd1n+pl4AUYEaxq6k4KS3uU3HHSWxrahDDApQoRUx2F8lpOxyj8
RiwnoO60IMPA7IFJqzcZuFqsgdxqiiYvnzT461KX8Mrw6fyMXeR2KAj2NwMX8dZN
At21Sf8+LSoh6q2HnugfiUd/jR10XbfxIIx2lXgIinb15GXgWydEQVrDJ7cUV7ix
Jd0S+dtOtp+lWtFHDoyjjqqsMV7+G8i/rFNZoxSkyZqsUTaKzaR6JD3moSyoYZgG
0+eXO4A=
=9EpR
-----END PGP SIGNATURE-----
Merge 5.8-rc6 into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's a fix for 5.8 addressing a long-standing bug in iuu_phoenix.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCXxAPEQAKCRALxc3C7H1l
CNbWAQDFSeF2DQAqfn3sgF9TveNYrWIXUVxEDsZvMVXd+dxUQAEAtjWxiTxZOona
ie6HFRJ/AzzUyTAi2RCjDFFRMNAqAQM=
=hcjc
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.8-rc6
Here's a fix for 5.8 addressing a long-standing bug in iuu_phoenix.
* tag 'usb-serial-5.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: iuu_phoenix: fix memory corruption
The driver would happily overwrite its write buffer with user data in
256 byte increments due to a removed buffer-space sanity check.
Fixes: 5fcf62b0f1 ("tty: iuu_phoenix: fix locking.")
Cc: stable <stable@vger.kernel.org> # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
sisusb_init.h is included by multiple source files, but the big data
tables contained are only referenced by one of them, leaving the tables
'defined but not used' by the remainder. We have a choice to either
place them inside the source file, taking up may lines and potentially
overwhelming the source file OR tuck them away neatly inside their own
headerfile. The latter was chosen.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/usb/misc/sisusbvga/sisusb.c:54:
drivers/usb/misc/sisusbvga/sisusb_init.h:664:34: warning: ‘SiSUSB_VCLKData’ defined but not used [-Wunused-const-variable=]
664 | static const struct SiS_VCLKData SiSUSB_VCLKData[] = {
| ^~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:406:35: warning: ‘SiSUSB_CRT1Table’ defined but not used [-Wunused-const-variable=]
406 | static const struct SiS_CRT1Table SiSUSB_CRT1Table[] = {
| ^~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:348:30: warning: ‘SiSUSB_RefIndex’ defined but not used [-Wunused-const-variable=]
348 | static const struct SiS_Ext2 SiSUSB_RefIndex[] = {
| ^~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:269:29: warning: ‘SiSUSB_EModeIDTable’ defined but not used [-Wunused-const-variable=]
269 | static const struct SiS_Ext SiSUSB_EModeIDTable[] = {
| ^~~~~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:238:36: warning: ‘SiSUSB_StandTable’ defined but not used [-Wunused-const-variable=]
238 | static const struct SiS_StandTable SiSUSB_StandTable[] = {
| ^~~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:201:37: warning: ‘SiSUSB_ModeResInfo’ defined but not used [-Wunused-const-variable=]
201 | static const struct SiS_ModeResInfo SiSUSB_ModeResInfo[] = {
| ^~~~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:196:28: warning: ‘SiSUSB_SModeIDTable’ defined but not used [-Wunused-const-variable=]
196 | static const struct SiS_St SiSUSB_SModeIDTable[] = {
| ^~~~~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:183:28: warning: ‘SiS_VGA_DAC’ defined but not used [-Wunused-const-variable=]
183 | static const unsigned char SiS_VGA_DAC[] = {
| ^~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:172:28: warning: ‘SiS_EGA_DAC’ defined but not used [-Wunused-const-variable=]
172 | static const unsigned char SiS_EGA_DAC[] = {
| ^~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:161:28: warning: ‘SiS_CGA_DAC’ defined but not used [-Wunused-const-variable=]
161 | static const unsigned char SiS_CGA_DAC[] = {
| ^~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:150:28: warning: ‘SiS_MDA_DAC’ defined but not used [-Wunused-const-variable=]
150 | static const unsigned char SiS_MDA_DAC[] = {
| ^~~~~~~~~~~
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200715093209.3165641-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are not referenced anywhere in the kernel.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/sisusbvga/sisusb_init.h:171:29: warning: ‘ModeIndex_1280x1024’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:170:29: warning: ‘ModeIndex_1280x768’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:169:29: warning: ‘ModeIndex_1280x720’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:168:29: warning: ‘ModeIndex_1152x864’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:167:29: warning: ‘ModeIndex_1024x576’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:166:29: warning: ‘ModeIndex_1024x768’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:165:29: warning: ‘ModeIndex_960x600’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:164:29: warning: ‘ModeIndex_960x540’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:163:29: warning: ‘ModeIndex_856x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:162:29: warning: ‘ModeIndex_848x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:161:29: warning: ‘ModeIndex_800x600’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:160:29: warning: ‘ModeIndex_800x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:159:29: warning: ‘ModeIndex_768x576’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:158:29: warning: ‘ModeIndex_720x576’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:157:29: warning: ‘ModeIndex_720x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:156:29: warning: ‘ModeIndex_640x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:155:29: warning: ‘ModeIndex_640x400’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:154:29: warning: ‘ModeIndex_512x384’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:153:29: warning: ‘ModeIndex_400x300’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:152:29: warning: ‘ModeIndex_320x240’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:151:29: warning: ‘ModeIndex_320x200’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:232:37: warning: ‘SiSUSB_ModeResInfo’ defined but not used [-Wunused-const-variable=]
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200715093209.3165641-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'sie' not described in 'c67x00_hcd_irq'
drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'int_status' not described in 'c67x00_hcd_irq'
drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'msg' not described in 'c67x00_hcd_irq'
drivers/usb/c67x00/c67x00-hcd.c:267: warning: Function parameter or member 'hcd' not described in 'c67x00_hcd_start'
drivers/usb/c67x00/c67x00-hcd.c:279: warning: Function parameter or member 'hcd' not described in 'c67x00_hcd_stop'
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200715093209.3165641-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A good attempt was made to document everything else.
Fixes the following W=1 kernel build warning(s):
drivers/usb/class/cdc-wdm.c:961: warning: Function parameter or member 'manage_power' not described in 'usb_cdc_wdm_register'
Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200715093209.3165641-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the header file containing a function's prototype isn't included by
the sourcefile containing the associated function, the build system
complains of missing prototypes.
Fixes the following W=1 kernel build warning(s):
drivers/usb/mtu3/mtu3_trace.c:13:6: warning: no previous prototype for ‘mtu3_dbg_trace’ [-Wmissing-prototypes]
13 | void mtu3_dbg_trace(struct device *dev, const char *fmt, ...)
| ^~~~~~~~~~~~~~
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200715093209.3165641-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit ec1f9d9f01 ("usb: dwc2: gadget: parity fix in isochronous mode") moved
these checks to dwc2_hsotg_change_ep_iso_parity() back in 2015. The assigned
value hasn't been read back since. Let's remove the unnecessary H/W read.
Fixes the following W=1 warning:
drivers/usb/dwc2/gadget.c: In function ‘dwc2_hsotg_epint’:
drivers/usb/dwc2/gadget.c:2981:6: warning: variable ‘ctrl’ set but not used [-Wunused-but-set-variable]
2981 | u32 ctrl;
| ^~~~
Cc: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Link: https://lore.kernel.org/r/20200715093209.3165641-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value obtained from GINTSTS2 should be masked with the GINTMSK2
value. Looks like this has been broken since
dwc2_gadget_wkup_alert_handler() was added back in 2018.
Also fixes the following W=1 warning:
drivers/usb/dwc2/gadget.c: In function ‘dwc2_gadget_wkup_alert_handler’:
drivers/usb/dwc2/gadget.c:259:6: warning: variable ‘gintmsk2’ set but not used [-Wunused-but-set-variable]
259 | u32 gintmsk2;
| ^~~~~~~~
Cc: Ben Dooks <ben@simtec.co.uk>
Fixes: 187c5298a1 ("usb: dwc2: gadget: Add handler for WkupAlert interrupt")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Link: https://lore.kernel.org/r/20200715093209.3165641-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The char buffer buf, receives data directly from user space,
so its content might be negative and its elements are left
shifted to form an unsigned integer.
Since left shifting a negative value is undefined behavior, thus
change the char to u8 to elimintate this UB.
Signed-off-by: Changming Liu <charley.ashbringer@gmail.com>
Link: https://lore.kernel.org/r/20200711043018.928-1-charley.ashbringer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200710190919.31464-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200710191842.32561-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200711135804.19735-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200711135813.19798-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200711135825.19862-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713092314.32774-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up the handling of special interfaces that either should be
ignored or that need a larger number of URBs.
Commit 66f092ed3b ("USB: serial: sierra: unify quirk handling logic")
replaced the previous is_blacklisted() and is_highmemory() helpers with
a single is_quirk() helper which made it even harder to understand what
the interface lists were used for.
Rename the interface-list struct, its members and the interface-lookup
helper and restructure the code somewhat in order to make it more
self-explanatory.
Link: https://lore.kernel.org/r/20200713153936.18032-1-johan@kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Enable TIOCGICOUNT to allow reading out the (unused) interrupt counters
and error statistics.
Note that modem-status events are currently left unimplemented as they
appear to be buffered on at least CP2102 and therefore cannot be used to
implement TIOCMIWAIT.
Link: https://lore.kernel.org/r/20200713105517.27796-4-johan@kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Add support for line-status events that specifically can be used to
detect and report parity errors.
Enable the device's event-insertion mode whenever input-parity checking
is requested. This will insert line and modem status events into the
data stream.
Note that modem-status changes appear to be buffered until a character
is received (at least on CP2102) and support is therefore left
unimplemented.
On at least one type of these chips (CP2102), line breaks are not
reported as expected either (regardless of whether SERIAL_BREAK_CHAR is
set) so do not enable event-mode when !IGNBRK is requested for now.
Link: https://lore.kernel.org/r/20200713105517.27796-3-johan@kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Try to disable the serial interface in the unlikely event that generic
open() fails.
Link: https://lore.kernel.org/r/20200713105517.27796-2-johan@kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Adding support for recent Intel devices (Tiger Lake and Jasper Lake)
on dwc3. We have some endianess fixes in cdns3, a memleak fix in
gr_udc and lock API usage fix in the legacy f_uac1
Signed-off-by: Felipe Balbi <balbi@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElLzh7wn96CXwjh2IzL64meEamQYFAl8IKSMACgkQzL64meEa
mQa26w/7BZdPUxY69eq947b/Qbb0r6KBXwx6tFEwQ51aBhAdv8KYnIAueloh98+k
56y7QjCvgfWtVZZsy8y/Et8kcfT32XfzlLoPMa+4wShSzD5hZfSWI43xQP3xfQs8
D65Yxy74Y4sbygI/Fs/VmaWLSSFxZkuKohwSVWNsRGu+FMDkhFu+D6TvDEnyK8Vm
bUpRj+qWDZJkuc0XQgiA7AlRaD5AegqsALLx4Hd2YaiLXWrFfwv9RZDAvg9fWCyQ
wocxqgW6JDysiA7okUiarv15u7MUcU+8czdNbhJjJK5N/tipWUH6lROZdKBHcLhn
V6tucOnlc/ArDWbLgAxZ6DnAOdDuCSPqPVUjVlh7zf0ZMmElKly2RRxHg7E0zhNs
e4mGrJGgYKCu+xLT+wpKLWhDKEMi9FH11pOBGdP5nqBWM9wOin11jU+hiRUa78FA
bMxktM2hjQtpJq9iGvIhVO10WRUHmbjs7VBEFOgvKxEc9uPWAAbjxoPI80FOhZmQ
oG3kCwwAme0HHUL4O+35F7LLnssYncD5YIExKU8PaQeMWXUkOe8H1oqNDxUcpj5J
rdNu+lBd1hP7AghSfynuQQkTdinJaiCP8KNOjk8BujL8O4pq4s83HfIMmv3haDMe
0N/MkKSnNQI7OmJJMDKoJpG+oRA41v0qgPCUHpoe+WZqV16xfrs=
=jf3f
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
USB: fixes for v5.8-rc3
Adding support for recent Intel devices (Tiger Lake and Jasper Lake)
on dwc3. We have some endianess fixes in cdns3, a memleak fix in
gr_udc and lock API usage fix in the legacy f_uac1
Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'fixes-for-v5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: gadget: function: fix missing spinlock in f_uac1_legacy
usb: gadget: udc: atmel: fix uninitialized read in debug printk
usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable()
usb: dwc2: Fix shutdown callback in platform
usb: cdns3: trace: fix some endian issues
usb: cdns3: ep0: fix some endian issues
usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()
usb: gadget: fix langid kernel-doc warning in usbstring.c
usb: dwc3: pci: add support for the Intel Jasper Lake
usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant
clang static analysis flags this error
c67x00-sched.c:489:55: warning: Use of memory after it is freed [unix.Malloc]
usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);
^~~~~~~~~~~~
Problem happens in this block of code
c67x00_release_urb(c67x00, urb);
usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb);
spin_unlock(&c67x00->lock);
usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);
In the call to c67x00_release_urb has this freeing of urbp
urbp = urb->hcpriv;
urb->hcpriv = NULL;
list_del(&urbp->hep_node);
kfree(urbp);
And so urbp is freed before usb_hcd_giveback_urb uses it as its 3rd
parameter.
Since all is required is the status, pass the status directly as is
done in c64x00_urb_dequeue
Fixes: e9b29ffc51 ("USB: add Cypress c67x00 OTG controller HCD driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200708131243.24336-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sparse tool complains as follows:
drivers/usb/gadget/udc/lpc32xx_udc.c:2989:25: warning:
symbol 'lpc32xx_usbddata' was not declared. Should it be static?
This variable is not used outside of lpc32xx_udc.c, so this commit
marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200707105350.7064-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200708184903.17350-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
struct usb_xhci_acpi_match becomes defined by unused.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-plat.c:457:36: warning: ‘usb_xhci_acpi_match’ defined but not used [-Wunused-const-variable=]
457 | static const struct acpi_device_id usb_xhci_acpi_match[] = {
| ^~~~~~~~~~~~~~~~~~~
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-33-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'td' has been completely unused since the driver's inception in 2009.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fhci-sched.c: In function ‘fhci_queue_urb’:
drivers/usb/host/fhci-sched.c:704:13: warning: variable ‘td’ set but not used [-Wunused-but-set-variable]
704 | struct td *td;
| ^~
Cc: Shlomi Gridish <gridish@freescale.com>
Cc: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Peter Barada <peterb@logicpd.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-32-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neither have been used since the driver's inception in 2009.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fhci-tds.c: In function ‘fhci_flush_bds’:
drivers/usb/host/fhci-tds.c:472:6: warning: variable ‘buf’ set but not used [-Wunused-but-set-variable]
472 | u32 buf;
| ^~~
drivers/usb/host/fhci-tds.c:470:6: warning: variable ‘extra_data’ set but not used [-Wunused-but-set-variable]
470 | u16 extra_data;
| ^~~~~~~~~~
drivers/usb/host/fhci-tds.c: In function ‘fhci_flush_actual_frame’:
drivers/usb/host/fhci-tds.c:527:6: warning: variable ‘extra_data’ set but not used [-Wunused-but-set-variable]
527 | u16 extra_data;
| ^~~~~~~~~~
Cc: Shlomi Gridish <gridish@freescale.com>
Cc: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Peter Barada <peterb@logicpd.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-31-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
struct dwc3_qcom_acpi_match becomes defined by unused.
Also need to place the platform data obtained via the matching process
inside the #ifdef, else that becomes unused too.
Fixes the following W=1 kernel build warning(s):
drivers/usb/dwc3/dwc3-qcom.c:761:36: warning: ‘dwc3_qcom_acpi_match’ defined but not used [-Wunused-const-variable=]
761 | static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
| ^~~~~~~~~~~~~~~~~~~~
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-30-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
struct ehci_acpi_match becomes defined by unused.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/ehci-platform.c:478:36: warning: ‘ehci_acpi_match’ defined but not used [-Wunused-const-variable=]
478 | static const struct acpi_device_id ehci_acpi_match[] = {
| ^~~~~~~~~~~~~~~
Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Steven Brown <sbrown@cortland.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: de Goede <hdegoede@redhat.com>
Cc: Michael Buesch <m@bues.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-29-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Demote xhci-dbc's file header to a standard comment block.
Fixes the following W=1 kernel build warning(s):
drivers/usb/early/xhci-dbc.c:10: warning: Function parameter or member 'fmt' not described in 'pr_fmt'
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-28-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the header file containing a function's prototype isn't included by
the sourcefile containing the associated function, the build system
complains of missing prototypes.
Fixes the following W=1 kernel build warning(s):
drivers/usb/early/ehci-dbgp.c: In function ‘early_dbgp_write’:
drivers/usb/early/ehci-dbgp.c:915:13: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
915 | int chunk, ret;
| ^~~
drivers/usb/early/xhci-dbc.c:600:12: warning: no previous prototype for ‘early_xdbc_parse_parameter’ [-Wmissing-prototypes]
600 | int __init early_xdbc_parse_parameter(char *s)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/early/xhci-dbc.c:653:12: warning: no previous prototype for ‘early_xdbc_setup_hardware’ [-Wmissing-prototypes]
653 | int __init early_xdbc_setup_hardware(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/early/xhci-dbc.c:910:13: warning: no previous prototype for ‘early_xdbc_register_console’ [-Wmissing-prototypes]
910 | void __init early_xdbc_register_console(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20200706133341.476881-27-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'ret' hasn't been checked since the driver's inception in 2009.
Fixes the following W=1 kernel build warning(s):
drivers/usb/early/ehci-dbgp.c: In function ‘early_dbgp_write’:
drivers/usb/early/ehci-dbgp.c:915:13: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
915 | int chunk, ret;
| ^~~
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/20200706133341.476881-26-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It isn't called from anywhere outside of ucsi.c.
Fixes the following W=1 kernel build warning(s):
drivers/usb/typec/ucsi/ucsi.c:1005:5: warning: no previous prototype for ‘ucsi_init’ [-Wmissing-prototypes]
1005 | int ucsi_init(struct ucsi *ucsi)
| ^~~~~~~~~
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-25-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/max3420_udc.c: In function ‘max3420_handle_setup’:
drivers/usb/gadget/udc/max3420_udc.c:626:5: warning: variable ‘addr’ set but not used [-Wunused-but-set-variable]
626 | u8 addr;
| ^~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks like it's never been used. Driver was mainlined in 2014.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/mv_u3d_core.c:35:19: warning: ‘driver_desc’ defined but not used [-Wunused-const-variable=]
35 | static const char driver_desc[] = DRIVER_DESC;
| ^~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Yu Xu <yuxu@marvell.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-23-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only 2 functions attempted to use kerneldoc in this massive file.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fotg210-hcd.c: In function ‘fotg210_run’:
drivers/usb/host/fotg210-hcd.c:5013:6: warning: variable ‘hcc_params’ set but not used [-Wunused-but-set-variable]
drivers/usb/host/fotg210-hcd.c:5569: warning: Function parameter or member 'pdev' not described in 'fotg210_hcd_probe'
drivers/usb/host/fotg210-hcd.c:5666: warning: Function parameter or member 'pdev' not described in 'fotg210_hcd_remove'
drivers/usb/host/fotg210-hcd.c:5666: warning: Excess function parameter 'dev' description in 'fotg210_hcd_remove'
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
Cc: Po-Yu Chuang <ratbert.chuang@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-22-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document either of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/bcma-hcd.c:180: warning: Function parameter or member 'usb_dev' not described in 'bcma_hcd_usb20_old_arm_init'
drivers/usb/host/bcma-hcd.c:268: warning: Function parameter or member 'bcma_hcd' not described in 'bcma_hcd_usb20_ns_init'
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Michael Buesch <m@bues.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/u_uac1_legacy.c:30: warning: Function parameter or member 'i' not described in 'snd_interval_refine_set'
drivers/usb/gadget/function/u_uac1_legacy.c:30: warning: Function parameter or member 'val' not described in 'snd_interval_refine_set'
drivers/usb/gadget/function/u_uac1_legacy.c:93: warning: Function parameter or member 'snd' not described in 'playback_default_hw_params'
drivers/usb/gadget/function/u_uac1_legacy.c:153: warning: Function parameter or member 'card' not described in 'u_audio_playback'
drivers/usb/gadget/function/u_uac1_legacy.c:153: warning: Function parameter or member 'buf' not described in 'u_audio_playback'
drivers/usb/gadget/function/u_uac1_legacy.c:153: warning: Function parameter or member 'count' not described in 'u_audio_playback'
drivers/usb/gadget/function/u_uac1_legacy.c:197: warning: Function parameter or member 'card' not described in 'gaudio_open_snd_dev'
drivers/usb/gadget/function/u_uac1_legacy.c:257: warning: Function parameter or member 'gau' not described in 'gaudio_close_snd_dev'
drivers/usb/gadget/function/u_uac1_legacy.c:286: warning: Function parameter or member 'card' not described in 'gaudio_setup'
drivers/usb/gadget/function/u_uac1_legacy.c:303: warning: Function parameter or member 'the_card' not described in 'gaudio_cleanup'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The result is actually read into fotg210->caps->hcc_params. No
need to popuate an unused varible with the unchecked return value
from fotg210_readl().
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fotg210-hcd.c: In function ‘fotg210_run’:
drivers/usb/host/fotg210-hcd.c:5013:6: warning: variable ‘hcc_params’ set but not used [-Wunused-but-set-variable]
5013 | u32 hcc_params;
| ^~~~~~~~~~
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
Cc: Po-Yu Chuang <ratbert.chuang@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/ehci-fsl.c:694: warning: Function parameter or member 'pdev' not described in 'fsl_ehci_drv_remove'
drivers/usb/host/ehci-fsl.c:694: warning: Excess function parameter 'dev' description in 'fsl_ehci_drv_remove'
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Randy Vinson <rvinson@mvista.com>
Cc: Dave Liu <daveliu@freescale.com>
Cc: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'imx21' not described in 'copy_to_dmem'
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'dmem_offset' not described in 'copy_to_dmem'
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'src' not described in 'copy_to_dmem'
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'count' not described in 'copy_to_dmem'
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Jay Monkman <jtm@lopingdog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ranging from missing descriptions and formatting mishaps to over-documenting
of missing arguments, likely due to bitrot.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/pch_udc.c:239: warning: Function parameter or member 'request' not described in 'pch_udc_stp_dma_desc'
drivers/usb/gadget/udc/pch_udc.c:315: warning: Function parameter or member 'irq_work_fall' not described in 'pch_vbus_gpio_data'
drivers/usb/gadget/udc/pch_udc.c:315: warning: Function parameter or member 'irq_work_rise' not described in 'pch_vbus_gpio_data'
drivers/usb/gadget/udc/pch_udc.c:482: warning: Function parameter or member 'ep' not described in 'pch_udc_write_csr'
drivers/usb/gadget/udc/pch_udc.c:482: warning: Excess function parameter 'addr' description in 'pch_udc_write_csr'
drivers/usb/gadget/udc/pch_udc.c:498: warning: Function parameter or member 'ep' not described in 'pch_udc_read_csr'
drivers/usb/gadget/udc/pch_udc.c:498: warning: Excess function parameter 'addr' description in 'pch_udc_read_csr'
drivers/usb/gadget/udc/pch_udc.c:662: warning: Function parameter or member 'ep_in' not described in 'pch_udc_ep_set_bufsz'
drivers/usb/gadget/udc/pch_udc.c:977: warning: Function parameter or member 'ep' not described in 'pch_udc_ep_enable'
drivers/usb/gadget/udc/pch_udc.c:977: warning: Function parameter or member 'cfg' not described in 'pch_udc_ep_enable'
drivers/usb/gadget/udc/pch_udc.c:977: warning: Excess function parameter 'regs' description in 'pch_udc_ep_enable'
drivers/usb/gadget/udc/pch_udc.c:1010: warning: Function parameter or member 'ep' not described in 'pch_udc_ep_disable'
drivers/usb/gadget/udc/pch_udc.c:1010: warning: Excess function parameter 'regs' description in 'pch_udc_ep_disable'
drivers/usb/gadget/udc/pch_udc.c:1030: warning: Function parameter or member 'ep' not described in 'pch_udc_wait_ep_stall'
drivers/usb/gadget/udc/pch_udc.c:1030: warning: Excess function parameter 'dev' description in 'pch_udc_wait_ep_stall'
drivers/usb/gadget/udc/pch_udc.c:1341: warning: Function parameter or member 'data' not described in 'pch_vbus_gpio_irq'
drivers/usb/gadget/udc/pch_udc.c:1341: warning: Excess function parameter 'dev' description in 'pch_vbus_gpio_irq'
drivers/usb/gadget/udc/pch_udc.c:1365: warning: Function parameter or member 'vbus_gpio_port' not described in 'pch_vbus_gpio_init'
drivers/usb/gadget/udc/pch_udc.c:1510: warning: Function parameter or member 'dev' not described in 'pch_udc_free_dma_chain'
drivers/usb/gadget/udc/pch_udc.c:1510: warning: Function parameter or member 'req' not described in 'pch_udc_free_dma_chain'
drivers/usb/gadget/udc/pch_udc.c:1717: warning: Function parameter or member 'usbep' not described in 'pch_udc_pcd_ep_disable'
drivers/usb/gadget/udc/pch_udc.c:2006: warning: Excess function parameter 'halt' description in 'pch_udc_pcd_set_wedge'
drivers/usb/gadget/udc/pch_udc.c:2756: warning: Function parameter or member 'pdev' not described in 'pch_udc_isr'
drivers/usb/gadget/udc/pch_udc.c:2756: warning: Excess function parameter 'dev' description in 'pch_udc_isr'
drivers/usb/gadget/udc/pch_udc.c:2906: warning: Function parameter or member 'dev' not described in 'init_dma_pools'
drivers/usb/gadget/udc/pch_udc.c:2906: warning: Excess function parameter 'pdev' description in 'init_dma_pools'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: LAPIS Semiconductor <tomoya-linux@dsn.lapis-semi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks as though it's never been used. Driver was introduced in 2014.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/mv_udc_core.c:56:19: warning: ‘driver_desc’ defined but not used [-Wunused-const-variable=]
56 | static const char driver_desc[] = DRIVER_DESC;
| ^~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chao Xie <chao.xie@marvell.com>
Cc: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks like it's been this way since the driver's inception in 2007.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/r8a66597-hcd.c: In function ‘clear_all_buffer’:
drivers/usb/host/r8a66597-hcd.c:478:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
478 | u16 tmp;
| ^~~
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are not used outside of this sourcefile, so make them static.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/lpc32xx_udc.c:1929:6: warning: no previous prototype for ‘udc_send_in_zlp’ [-Wmissing-prototypes]
1929 | void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
| ^~~~~~~~~~~~~~~
drivers/usb/gadget/udc/lpc32xx_udc.c:1943:6: warning: no previous prototype for ‘udc_handle_eps’ [-Wmissing-prototypes]
1943 | void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
| ^~~~~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Cc: Kevin Wells <kevin.wells@nxp.com>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20200706133341.476881-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'type' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'h' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'data' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'len' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'priv' not described in '__ffs_data_do_os_desc'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-12-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks as though it's never been used. Driver was introduced in 2010.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/legacy/nokia.c:65:19: warning: ‘product_nokia’ defined but not used [-Wunused-const-variable=]
65 | static const char product_nokia[] = NOKIA_LONG_NAME;
| ^~~~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Al Borchers <alborchers@steinerpoint.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e78355b577 ("usb: gadget: udc: atmel: Don't use DT to
configure end point") pulled out all functionality dealing with 'pp'.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/atmel_usba_udc.c: In function ‘atmel_udc_of_init’:
drivers/usb/gadget/udc/atmel_usba_udc.c:2106:22: warning: variable ‘pp’ set but not used [-Wunused-but-set-variable]
2106 | struct device_node *pp;
| ^~
Cc: Cristian Birsan <cristian.birsan@microchip.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'dev' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'function' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'size' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'data' not described in 'lego_usb_tower_debug_data'
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Cc: David Glance <davidgsf@sourceforge.net>
Cc: david <david@csse.uwa.edu.au>
Cc: legousb-devel@lists.sourceforge.net
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mostly bitrotted argument descriptions/names. Also the removal
of a blank line in the middle of a kerneldoc header, which is
not allowed.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/pxa27x_udc.c:398: warning: Function parameter or member 'ep' not described in 'ep_write_UDCCSR'
drivers/usb/gadget/udc/pxa27x_udc.c:398: warning: Excess function parameter 'udc' description in 'ep_write_UDCCSR'
drivers/usb/gadget/udc/pxa27x_udc.c:479: warning: Function parameter or member 'udc' not described in 'set_ep0state'
drivers/usb/gadget/udc/pxa27x_udc.c:479: warning: Excess function parameter 'dev' description in 'set_ep0state'
drivers/usb/gadget/udc/pxa27x_udc.c:506: warning: Excess function parameter 'req' description in 'inc_ep_stats_reqs'
drivers/usb/gadget/udc/pxa27x_udc.c:1476: warning: bad line:
drivers/usb/gadget/udc/pxa27x_udc.c:1697: warning: Function parameter or member 'udc' not described in 'udc_enable'
drivers/usb/gadget/udc/pxa27x_udc.c:1697: warning: Excess function parameter 'dev' description in 'udc_enable'
drivers/usb/gadget/udc/pxa27x_udc.c:1750: warning: Function parameter or member 'g' not described in 'pxa27x_udc_start'
drivers/usb/gadget/udc/pxa27x_udc.c:1750: warning: Excess function parameter 'bind' description in 'pxa27x_udc_start'
drivers/usb/gadget/udc/pxa27x_udc.c:1784: warning: Excess function parameter 'driver' description in 'stop_activity'
drivers/usb/gadget/udc/pxa27x_udc.c:1800: warning: Function parameter or member 'g' not described in 'pxa27x_udc_stop'
drivers/usb/gadget/udc/pxa27x_udc.c:1800: warning: Excess function parameter 'driver' description in 'pxa27x_udc_stop'
drivers/usb/gadget/udc/pxa27x_udc.c:2358: warning: Function parameter or member 'pdev' not described in 'pxa_udc_probe'
drivers/usb/gadget/udc/pxa27x_udc.c:2358: warning: Excess function parameter '_dev' description in 'pxa_udc_probe'
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kerneldoc expects all function arguments to be documented. If any
are missed it will complain. Downgrade one header with 3 missing
argument descriptions and one which makes no attempt.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'dev_addr' not described in 'gether_setup_name'
drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'host_addr' not described in 'gether_setup_name'
drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'qmult' not described in 'gether_setup_name'
drivers/usb/gadget/function/u_ether.c:1022: warning: Function parameter or member 'dev' not described in 'gether_cleanup'
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/amd5536udc_pci.c:52:19: warning: ‘mod_desc’ defined but not used [-Wunused-const-variable=]
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/legacy/printer.c:24:19: warning: ‘driver_desc’ defined but not used [-Wunused-const-variable=]
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the structure's properties here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/ci_hdrc_pci.c:132: warning: cannot understand function prototype: 'const struct pci_device_id ci_hdrc_pci_id_table[] = '
Cc: Peter Chen <Peter.Chen@nxp.com>
Cc: David Lopo <dlopo@chipidea.mips.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'dev' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'function' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'size' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'data' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:290: warning: Function parameter or member 'dev' not described in 'tower_delete'
drivers/usb/misc/legousbtower.c:306: warning: Function parameter or member 'inode' not described in 'tower_open'
drivers/usb/misc/legousbtower.c:306: warning: Function parameter or member 'file' not described in 'tower_open'
drivers/usb/misc/legousbtower.c:405: warning: Function parameter or member 'inode' not described in 'tower_release'
drivers/usb/misc/legousbtower.c:405: warning: Function parameter or member 'file' not described in 'tower_release'
drivers/usb/misc/legousbtower.c:452: warning: Function parameter or member 'dev' not described in 'tower_check_for_read_packet'
drivers/usb/misc/legousbtower.c:468: warning: Function parameter or member 'file' not described in 'tower_poll'
drivers/usb/misc/legousbtower.c:468: warning: Function parameter or member 'wait' not described in 'tower_poll'
drivers/usb/misc/legousbtower.c:494: warning: Function parameter or member 'file' not described in 'tower_llseek'
drivers/usb/misc/legousbtower.c:494: warning: Function parameter or member 'off' not described in 'tower_llseek'
drivers/usb/misc/legousbtower.c:494: warning: Function parameter or member 'whence' not described in 'tower_llseek'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'file' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'buffer' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'count' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'ppos' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'file' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'buffer' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'count' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'ppos' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:669: warning: Function parameter or member 'urb' not described in 'tower_interrupt_in_callback'
drivers/usb/misc/legousbtower.c:724: warning: Function parameter or member 'urb' not described in 'tower_interrupt_out_callback'
drivers/usb/misc/legousbtower.c:752: warning: Function parameter or member 'interface' not described in 'tower_probe'
drivers/usb/misc/legousbtower.c:752: warning: Function parameter or member 'id' not described in 'tower_probe'
drivers/usb/misc/legousbtower.c:863: warning: Function parameter or member 'interface' not described in 'tower_disconnect'
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Cc: David Glance <davidgsf@sourceforge.net>
Cc: david <david@csse.uwa.edu.au>
Cc: legousb-devel@lists.sourceforge.net
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An attempt was made to document the functions in 'dummy_hcd',
but a simple spelling mistake was made.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/dummy_hcd.c:1597: warning: Function parameter or member 'dum_hcd' not described in 'handle_control_request'
drivers/usb/gadget/udc/dummy_hcd.c:1597: warning: Excess function parameter 'dum' description in 'handle_control_request'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-31-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/musb/musb_dsps.c:44: warning: cannot understand function prototype: 'struct dsps_musb_wrapper '
drivers/usb/musb/musb_dsps.c:102: warning: cannot understand function prototype: 'struct dsps_glue '
drivers/usb/musb/musb_dsps.c:169: warning: Function parameter or member 'musb' not described in 'dsps_musb_enable'
drivers/usb/musb/musb_dsps.c:195: warning: Function parameter or member 'musb' not described in 'dsps_musb_disable'
Cc: Bin Liu <b-liu@ti.com>
Cc: Ravi B <ravibabu@ti.com>
Cc: Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-29-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/ldusb.c:192: warning: Function parameter or member 'dev' not described in 'ld_usb_abort_transfers'
drivers/usb/misc/ldusb.c:206: warning: Function parameter or member 'dev' not described in 'ld_usb_delete'
drivers/usb/misc/ldusb.c:220: warning: Function parameter or member 'urb' not described in 'ld_usb_interrupt_in_callback'
drivers/usb/misc/ldusb.c:281: warning: Function parameter or member 'urb' not described in 'ld_usb_interrupt_out_callback'
drivers/usb/misc/ldusb.c:301: warning: Function parameter or member 'inode' not described in 'ld_usb_open'
drivers/usb/misc/ldusb.c:301: warning: Function parameter or member 'file' not described in 'ld_usb_open'
drivers/usb/misc/ldusb.c:372: warning: Function parameter or member 'inode' not described in 'ld_usb_release'
drivers/usb/misc/ldusb.c:372: warning: Function parameter or member 'file' not described in 'ld_usb_release'
drivers/usb/misc/ldusb.c:414: warning: Function parameter or member 'file' not described in 'ld_usb_poll'
drivers/usb/misc/ldusb.c:414: warning: Function parameter or member 'wait' not described in 'ld_usb_poll'
drivers/usb/misc/ldusb.c:439: warning: Function parameter or member 'file' not described in 'ld_usb_read'
drivers/usb/misc/ldusb.c:439: warning: Function parameter or member 'buffer' not described in 'ld_usb_read'
drivers/usb/misc/ldusb.c:439: warning: Function parameter or member 'count' not described in 'ld_usb_read'
drivers/usb/misc/ldusb.c:439: warning: Function parameter or member 'ppos' not described in 'ld_usb_read'
drivers/usb/misc/ldusb.c:526: warning: Function parameter or member 'file' not described in 'ld_usb_write'
drivers/usb/misc/ldusb.c:526: warning: Function parameter or member 'buffer' not described in 'ld_usb_write'
drivers/usb/misc/ldusb.c:526: warning: Function parameter or member 'count' not described in 'ld_usb_write'
drivers/usb/misc/ldusb.c:526: warning: Function parameter or member 'ppos' not described in 'ld_usb_write'
drivers/usb/misc/ldusb.c:651: warning: Function parameter or member 'intf' not described in 'ld_usb_probe'
drivers/usb/misc/ldusb.c:651: warning: Function parameter or member 'id' not described in 'ld_usb_probe'
drivers/usb/misc/ldusb.c:754: warning: Function parameter or member 'intf' not described in 'ld_usb_disconnect'
Cc: Johan Hovold <johan@kernel.org>
Cc: Michael Hund <mhund@ld-didactic.de>
Cc: David Glance <advidgsf@sourceforge.net>
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-28-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks as though this has been an issue since the driver's
inception back in 2014.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/u_serial.c:538: warning: Function parameter or member 'port' not described in 'gs_start_io'
drivers/usb/gadget/function/u_serial.c:538: warning: Excess function parameter 'dev' description in 'gs_start_io'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Al Borchers <alborchers@steinerpoint.com>
Cc: Peter Berger <pberger@brimson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-27-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/iowarrior.c:251: warning: Function parameter or member 'dev' not described in 'iowarrior_delete'
drivers/usb/misc/iowarrior.c:279: warning: Function parameter or member 'file' not described in 'iowarrior_read'
drivers/usb/misc/iowarrior.c:279: warning: Function parameter or member 'buffer' not described in 'iowarrior_read'
drivers/usb/misc/iowarrior.c:279: warning: Function parameter or member 'count' not described in 'iowarrior_read'
drivers/usb/misc/iowarrior.c:279: warning: Function parameter or member 'ppos' not described in 'iowarrior_read'
drivers/usb/misc/iowarrior.c:483: warning: Function parameter or member 'file' not described in 'iowarrior_ioctl'
drivers/usb/misc/iowarrior.c:483: warning: Function parameter or member 'cmd' not described in 'iowarrior_ioctl'
drivers/usb/misc/iowarrior.c:483: warning: Function parameter or member 'arg' not described in 'iowarrior_ioctl'
drivers/usb/misc/iowarrior.c:599: warning: Function parameter or member 'inode' not described in 'iowarrior_open'
drivers/usb/misc/iowarrior.c:599: warning: Function parameter or member 'file' not described in 'iowarrior_open'
drivers/usb/misc/iowarrior.c:647: warning: Function parameter or member 'inode' not described in 'iowarrior_release'
drivers/usb/misc/iowarrior.c:647: warning: Function parameter or member 'file' not described in 'iowarrior_release'
drivers/usb/misc/iowarrior.c:753: warning: Function parameter or member 'interface' not described in 'iowarrior_probe'
drivers/usb/misc/iowarrior.c:753: warning: Function parameter or member 'id' not described in 'iowarrior_probe'
drivers/usb/misc/iowarrior.c:879: warning: Function parameter or member 'interface' not described in 'iowarrior_disconnect'
Cc: Johan Hovold <johan@kernel.org>
Cc: Christian Lucht <lucht@codemercs.com>
Cc: Stephane Dalton <sdalton@videotron.ca>
Cc: Stephane Doyon <s.doyon@videotron.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-26-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks although Stephane's name was corrupted somehow.
Cc: Johan Hovold <johan@kernel.org>
Cc: Christian Lucht <lucht@codemercs.com>
Cc: Stephane Dalton <sdalton@videotron.ca>
Cc: Stephane Doyon <s.doyon@videotron.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-25-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/usbmisc_imx.c:801: warning: Function parameter or member 'data' not described in 'imx7d_charger_detection'
Cc: Peter Chen <Peter.Chen@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/typec/tcpm/fusb302.c: In function ‘fusb302_log’:
drivers/usb/typec/tcpm/fusb302.c:186:2: warning: function ‘fusb302_log’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
186 | _fusb302_log(chip, fmt, args);
| ^~~~~~~~~~~~
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Yueyao Zhu <yueyao.zhu@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200703174148.2749969-23-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the header file containing a function's prototype isn't included by
the sourcefile containing the associated function, the build system
complains of missing prototypes.
Fixes the following W=1 kernel build warning(s):
drivers/usb/typec/altmodes/displayport.c:511:5: warning: no previous prototype for ‘dp_altmode_probe’ [-Wmissing-prototypes]
drivers/usb/typec/altmodes/displayport.c:551:6: warning: no previous prototype for ‘dp_altmode_remove’ [-Wmissing-prototypes]
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-22-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Demote displayport's file header to a standard comment block.
Fixes the following W=1 kernel build warning(s):
drivers/usb/typec/altmodes/displayport.c:18: warning: Function parameter or member '_dp' not described in 'DP_HEADER'
drivers/usb/typec/altmodes/displayport.c:18: warning: Function parameter or member 'cmd' not described in 'DP_HEADER'
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return value of alauda_get_media_status() hasn't been checked
since the driver's inception back in 2005. If nothing have gone
wrong/been detected until this point, it's probably safe to just
remove the variable.
Fixes the following W=1 kernel build warning(s):
drivers/usb/storage/alauda.c: In function ‘alauda_check_media’:
drivers/usb/storage/alauda.c:456:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
456 | int rc;
| ^~
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Daniel Drake <dsd@gentoo.org>
Cc: usb-storage@lists.one-eyed-alien.net
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-debugfs.c:128:2: warning: function ‘xhci_debugfs_regset’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
128 | vsnprintf(rgs->name, sizeof(rgs->name), fmt, args);
| ^~~~~~~~~
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Descriptions were missing for 'ci' almost throughout. There was
one instance of over-documenting. Finally one function argument
was incorrectly documented (probably down to bitrot).
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/udc.c:245: warning: Function parameter or member 'ci' not described in 'hw_port_is_high_speed'
drivers/usb/chipidea/udc.c:271: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_intr_active'
drivers/usb/chipidea/udc.c:285: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_setup_guard'
drivers/usb/chipidea/udc.c:296: warning: Function parameter or member 'ci' not described in 'hw_test_and_set_setup_guard'
drivers/usb/chipidea/udc.c:321: warning: Function parameter or member 'ci' not described in 'hw_usb_reset'
drivers/usb/chipidea/udc.c:628: warning: Excess function parameter 'ci' description in 'free_pending_td'
drivers/usb/chipidea/udc.c:655: warning: Function parameter or member 'hwep' not described in '_hardware_dequeue'
drivers/usb/chipidea/udc.c:655: warning: Excess function parameter 'gadget' description in '_hardware_dequeue'
Cc: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Demote xhci-dbgtty's file header to a standard comment block.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-dbgtty.c:19: warning: Function parameter or member 'port' not described in 'dbc_send_packet'
drivers/usb/host/xhci-dbgtty.c:19: warning: Function parameter or member 'packet' not described in 'dbc_send_packet'
drivers/usb/host/xhci-dbgtty.c:19: warning: Function parameter or member 'size' not described in 'dbc_send_packet'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Demote xhci-dbgcap's file header to a standard comment block.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-dbgcap.c:20: warning: Function parameter or member 'xhci' not described in 'dbc_dma_alloc_coherent'
drivers/usb/host/xhci-dbgcap.c:20: warning: Function parameter or member 'size' not described in 'dbc_dma_alloc_coherent'
drivers/usb/host/xhci-dbgcap.c:20: warning: Function parameter or member 'dma_handle' not described in 'dbc_dma_alloc_coherent'
drivers/usb/host/xhci-dbgcap.c:20: warning: Function parameter or member 'flags' not described in 'dbc_dma_alloc_coherent'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'xhci' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'num_segs' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'cycle_state' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'type' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'max_packet' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'flags' not described in 'xhci_ring_alloc'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci.c:1285: warning: Function parameter or member 'desc' not described in 'xhci_get_endpoint_index'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Help with adding the odd description where they have been omitted or
where the format isn't quite right. Demote all function headers which
are lacking any attempt of describing their arguments.
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/udc.c:645: warning: Function parameter or member 'hwreq' not described in '_hardware_dequeue'
drivers/usb/chipidea/udc.c:645: warning: Excess function parameter 'gadget' description in '_hardware_dequeue'
drivers/usb/chipidea/udc.c:1326: warning: Function parameter or member 'ep' not described in 'ep_enable'
drivers/usb/chipidea/udc.c:1326: warning: Function parameter or member 'desc' not described in 'ep_enable'
drivers/usb/chipidea/udc.c:1393: warning: Function parameter or member 'ep' not described in 'ep_disable'
drivers/usb/chipidea/udc.c:1433: warning: Function parameter or member 'ep' not described in 'ep_alloc_request'
drivers/usb/chipidea/udc.c:1433: warning: Function parameter or member 'gfp_flags' not described in 'ep_alloc_request'
drivers/usb/chipidea/udc.c:1454: warning: Function parameter or member 'ep' not described in 'ep_free_request'
drivers/usb/chipidea/udc.c:1454: warning: Function parameter or member 'req' not described in 'ep_free_request'
drivers/usb/chipidea/udc.c:1488: warning: Function parameter or member 'ep' not described in 'ep_queue'
drivers/usb/chipidea/udc.c:1488: warning: Function parameter or member 'req' not described in 'ep_queue'
drivers/usb/chipidea/udc.c:1488: warning: Function parameter or member 'gfp_flags' not described in 'ep_queue'
drivers/usb/chipidea/udc.c:1512: warning: Function parameter or member 'ep' not described in 'ep_dequeue'
drivers/usb/chipidea/udc.c:1512: warning: Function parameter or member 'req' not described in 'ep_dequeue'
drivers/usb/chipidea/udc.c:1556: warning: Function parameter or member 'ep' not described in 'ep_set_halt'
drivers/usb/chipidea/udc.c:1556: warning: Function parameter or member 'value' not described in 'ep_set_halt'
drivers/usb/chipidea/udc.c:1566: warning: Function parameter or member 'ep' not described in 'ep_set_wedge'
drivers/usb/chipidea/udc.c:1586: warning: Function parameter or member 'ep' not described in 'ep_fifo_flush'
drivers/usb/chipidea/udc.c:1610: warning: cannot understand function prototype: 'const struct usb_ep_ops usb_ep_ops = '
drivers/usb/chipidea/udc.c:1629: warning: Function parameter or member '_gadget' not described in 'ci_hdrc_gadget_connect'
drivers/usb/chipidea/udc.c:1629: warning: Function parameter or member 'is_active' not described in 'ci_hdrc_gadget_connect'
drivers/usb/chipidea/udc.c:1780: warning: cannot understand function prototype: 'const struct usb_gadget_ops usb_gadget_ops = '
drivers/usb/chipidea/udc.c:1931: warning: Function parameter or member 'gadget' not described in 'ci_udc_stop'
drivers/usb/chipidea/udc.c:1965: warning: Function parameter or member 'ci' not described in 'udc_irq'
drivers/usb/chipidea/udc.c:2095: warning: Function parameter or member 'ci' not described in 'ci_hdrc_gadget_destroy'
drivers/usb/chipidea/udc.c:2144: warning: Function parameter or member 'ci' not described in 'ci_hdrc_gadget_init'
Cc: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks like a very popular argument to omit descriptions for.
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/udc.c:80: warning: Function parameter or member 'ci' not described in 'hw_device_state'
drivers/usb/chipidea/udc.c💯 warning: Function parameter or member 'ci' not described in 'hw_ep_flush'
drivers/usb/chipidea/udc.c:121: warning: Function parameter or member 'ci' not described in 'hw_ep_disable'
drivers/usb/chipidea/udc.c:136: warning: Function parameter or member 'ci' not described in 'hw_ep_enable'
drivers/usb/chipidea/udc.c:170: warning: Function parameter or member 'ci' not described in 'hw_ep_get_halt'
drivers/usb/chipidea/udc.c:185: warning: Function parameter or member 'ci' not described in 'hw_ep_prime'
drivers/usb/chipidea/udc.c:215: warning: Function parameter or member 'ci' not described in 'hw_ep_set_halt'
drivers/usb/chipidea/udc.c:238: warning: Function parameter or member 'ci' not described in 'hw_port_is_high_speed'
drivers/usb/chipidea/udc.c:251: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_complete'
drivers/usb/chipidea/udc.c:263: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_intr_active'
drivers/usb/chipidea/udc.c:277: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_setup_guard'
drivers/usb/chipidea/udc.c:288: warning: Function parameter or member 'ci' not described in 'hw_test_and_set_setup_guard'
drivers/usb/chipidea/udc.c:300: warning: Function parameter or member 'ci' not described in 'hw_usb_set_address'
drivers/usb/chipidea/udc.c:312: warning: Function parameter or member 'ci' not described in 'hw_usb_reset'
Cc: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-12-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/debug.c:25: warning: Function parameter or member 's' not described in 'ci_device_show'
drivers/usb/chipidea/debug.c:25: warning: Function parameter or member 'data' not described in 'ci_device_show'
drivers/usb/chipidea/debug.c:54: warning: Function parameter or member 's' not described in 'ci_port_test_show'
drivers/usb/chipidea/debug.c:54: warning: Function parameter or member 'data' not described in 'ci_port_test_show'
drivers/usb/chipidea/debug.c:75: warning: Function parameter or member 'file' not described in 'ci_port_test_write'
drivers/usb/chipidea/debug.c:75: warning: Function parameter or member 'ubuf' not described in 'ci_port_test_write'
drivers/usb/chipidea/debug.c:75: warning: Function parameter or member 'count' not described in 'ci_port_test_write'
drivers/usb/chipidea/debug.c:75: warning: Function parameter or member 'ppos' not described in 'ci_port_test_write'
drivers/usb/chipidea/debug.c:122: warning: Function parameter or member 's' not described in 'ci_qheads_show'
drivers/usb/chipidea/debug.c:122: warning: Function parameter or member 'data' not described in 'ci_qheads_show'
drivers/usb/chipidea/debug.c:154: warning: Function parameter or member 's' not described in 'ci_requests_show'
drivers/usb/chipidea/debug.c:154: warning: Function parameter or member 'data' not described in 'ci_requests_show'
Cc: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly we add some missing descriptions. Then we fix some formatting
issues. Kerneldoc expects arguments to be in the format '@.*: '. If
either the '@' or ':' is omitted, kerneldoc gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/otg.c:29: warning: Function parameter or member 'ci' not described in 'hw_read_otgsc'
drivers/usb/chipidea/otg.c:82: warning: Function parameter or member 'ci' not described in 'hw_write_otgsc'
drivers/usb/chipidea/otg.c:235: warning: Function parameter or member 'ci' not described in 'ci_hdrc_otg_init'
drivers/usb/chipidea/otg.c:254: warning: Function parameter or member 'ci' not described in 'ci_hdrc_otg_destroy'
Cc: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly, file headers should not be in kerneldoc format. Function
args should be in the format '@.*: '. We also take the time to
add some descriptions for various argument which have been
previously left out. Finally we remove descriptions for absent
arguments.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/core.c:25: warning: Incorrect use of kernel-doc format: * struct usb_udc - describes one usb device controller
drivers/usb/gadget/udc/core.c:36: warning: cannot understand function prototype: 'struct usb_udc '
drivers/usb/gadget/udc/core.c:901: warning: Function parameter or member 'ep' not described in 'usb_gadget_giveback_request'
drivers/usb/gadget/udc/core.c:901: warning: Function parameter or member 'req' not described in 'usb_gadget_giveback_request'
drivers/usb/gadget/udc/core.c:1098: warning: Function parameter or member 'udc' not described in 'usb_gadget_udc_stop'
drivers/usb/gadget/udc/core.c:1098: warning: Excess function parameter 'gadget' description in 'usb_gadget_udc_stop'
drivers/usb/gadget/udc/core.c:1098: warning: Excess function parameter 'driver' description in 'usb_gadget_udc_stop'
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/core.c:163: warning: Function parameter or member 'ci' not described in 'hw_port_test_set'
Cc: Peter Chen <Peter.Chen@nxp.com>
Cc: David Lopo <dlopo@chipidea.mips.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/adutux.c:117: warning: Function parameter or member 'dev' not described in 'adu_abort_transfers'
drivers/usb/misc/adutux.c:653: warning: Function parameter or member 'interface' not described in 'adu_probe'
drivers/usb/misc/adutux.c:653: warning: Function parameter or member 'id' not described in 'adu_probe'
drivers/usb/misc/adutux.c:762: warning: Function parameter or member 'interface' not described in 'adu_disconnect'
Cc: Johan Hovold <johan@kernel.org>
Cc: David Glance <davidgsf@sourceforge.net>
Cc: Juergen Stuber <stuber@loria.fr>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/atm/ueagle-atm.c:578: warning: Function parameter or member 'usb' not described in 'uea_send_modem_cmd'
drivers/usb/atm/ueagle-atm.c:578: warning: Function parameter or member 'addr' not described in 'uea_send_modem_cmd'
drivers/usb/atm/ueagle-atm.c:578: warning: Function parameter or member 'size' not described in 'uea_send_modem_cmd'
drivers/usb/atm/ueagle-atm.c:578: warning: Function parameter or member 'buff' not described in 'uea_send_modem_cmd'
drivers/usb/atm/ueagle-atm.c:679: warning: Function parameter or member 'usb' not described in 'uea_load_firmware'
drivers/usb/atm/ueagle-atm.c:679: warning: Function parameter or member 'ver' not described in 'uea_load_firmware'
Cc: Matthieu CASTET <castet.matthieu@free.fr>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Damien Bergamini <damien.bergamini@free.fr>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/core/ledtrig-usbport.c:42: warning: Function parameter or member 'usbport_data' not described in 'usbport_trig_usb_dev_observed'
drivers/usb/core/ledtrig-usbport.c:42: warning: Function parameter or member 'usb_dev' not described in 'usbport_trig_usb_dev_observed'
drivers/usb/core/ledtrig-usbport.c:71: warning: Function parameter or member 'usbport_data' not described in 'usbport_trig_update_count'
drivers/usb/core/ledtrig-usbport.c:131: warning: Function parameter or member 'usbport_data' not described in 'usbport_trig_port_observed'
drivers/usb/core/ledtrig-usbport.c:131: warning: Function parameter or member 'usb_dev' not described in 'usbport_trig_port_observed'
drivers/usb/core/ledtrig-usbport.c:131: warning: Function parameter or member 'port1' not described in 'usbport_trig_port_observed'
Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/ohci-s3c2410.c:356: warning: Function parameter or member 'dev' not described in 'ohci_hcd_s3c2410_probe'
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Roman Weissgaerber <weissg@vienna.at>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Christopher Hoover <ch@hpl.hp.com>
Cc: Ben Dooks <ben@simtec.co.uk>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without it, the build system complains that it was declared inside
the parameter list.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/usb/mtu3/mtu3_trace.c:11:
drivers/usb/mtu3/mtu3_debug.h:29:36: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration
29 | void ssusb_dev_debugfs_init(struct ssusb_mtk *ssusb);
| ^~~~~~~~~
drivers/usb/mtu3/mtu3_debug.h:30:35: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration
30 | void ssusb_dr_debugfs_init(struct ssusb_mtk *ssusb);
| ^~~~~~~~~
drivers/usb/mtu3/mtu3_debug.h:31:39: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration
31 | void ssusb_debugfs_create_root(struct ssusb_mtk *ssusb);
| ^~~~~~~~~
drivers/usb/mtu3/mtu3_debug.h:32:39: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration
32 | void ssusb_debugfs_remove_root(struct ssusb_mtk *ssusb);
| ^~~~~~~~~
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The EHCI OMAP driver includes <linux/gpio.h> but does not use
any symbols from this file, so drop it.
Cc: Roger Quadros <rogerq@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200703131059.515436-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add inline sysrq break-handler dummy to allow the compiler to eliminate
further code when either console or sysrq support isn't enabled and to
clearly mark the two sysrq functions as belonging together.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Inline the dummy sysrq character handling when either console support or
magic-sysrq support isn't enabled to allow the compiler to eliminate
unused code.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Do not set the sysrq timestamp unless CONFIG_MAGIC_SYSRQ is enabled to
avoid unnecessary per-character processing for consoles.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Only set the sysrq timestamp for console ports to avoid having every
driver also check the console flag when processing incoming data.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Only the last NUL in a packet should be flagged as a break character,
for example, to avoid dropping unrelated characters when IGNBRK is set.
Also make sysrq work by consuming the break character instead of having
it immediately cancel the sysrq request, and by not processing it
prematurely to avoid triggering a sysrq based on an unrelated character
received in the same packet (which was received *before* the break).
Note that the break flag can be left set also for a packet received
immediately following a break and that and an ending NUL in such a
packet will continue to be reported as a break as there's no good way to
tell it apart from an actual break.
Tested on FT232R and FT232H.
Fixes: 72fda3ca6f ("USB: serial: ftd_sio: implement sysrq handling on break")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up receive processing by dropping the character pointer and
keeping the length argument unchanged throughout the function.
Also make it more apparent that sysrq processing can consume a
characters by adding an explicit continue.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Use an unsigned type for the process-packet buffer argument and give it
a more apt name.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Add a missing spinlock protection for play_queue, because
the play_queue may be destroyed when the "playback_work"
work func and "f_audio_out_ep_complete" callback func
operate this paly_queue at the same time.
Fixes: c6994e6f06 ("USB: gadget: add USB Audio Gadget driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Zhang Qiang <qiang.zhang@windriver.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fixed commit moved the assignment of 'req', but did not update a
reference in the DBG() call. Use the argument as it was renamed.
Fixes: 5fb694f96e ("usb: gadget: udc: atmel: fix possible oops when unloading module")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fixed commit removed the offending behaviour from the driver, but missed
the comment and associated test. Remove them now.
Fixes: 38e58986e6 ("usb: gadget: udc: atmel: don't disable enpdoints we don't own")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
To avoid lot of interrupts from dwc2 core, which can be asserted in
specific conditions need to disable interrupts on HW level instead of
disable IRQs on Kernel level, because of IRQ can be shared between
drivers.
Cc: stable@vger.kernel.org
Fixes: a40a00318c ("usb: dwc2: add shutdown callback to platform variant")
Tested-by: Frank Mori Hess <fmh6jj@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
It is found by sparse.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
It is found by sparse.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
gr_ep_init() does not assign the allocated request anywhere if allocation
of memory for the buffer fails. This is a memory leak fixed by the given
patch.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fix spelling of the 'langid' function argument in the kernel-doc
notation to quieten a kernel-doc warning.
../drivers/usb/gadget/usbstring.c:77: warning: Function parameter or member 'langid' not described in 'usb_validate_langid'
../drivers/usb/gadget/usbstring.c:77: warning: Excess function parameter 'lang' description in 'usb_validate_langid'
Fixes: 17309a6a43 ("usb: gadget: add "usb_validate_langid" function")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
Cc: Tao Ren <rentao.bupt@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch adds the necessary PCI ID for Intel Jasper Lake
devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch adds the necessary PCI ID for TGP-H devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Here are some new device ids for 5.8.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCXwXEjgAKCRALxc3C7H1l
CF1WAP9mQDeFUonVQNpF7Sn/3LWcylvrXPvAJC3+/6D+ZN8FsAD8DEEKPxzlecT6
OWlOz3WhSUPYPjIRvBLWtrpSiMYN1Qc=
=8xIH
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.8-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.8-rc5
Here are some new device ids for 5.8.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.8-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Quectel EG95 LTE modem
USB: serial: ch341: add new Product ID for CH340
USB: serial: option: add GosunCn GM500 series
USB: serial: cypress_m8: enable Simply Automated UPB PIM
Silence documentation build warning by correcting kernel-doc comment
for sub_validate_langid function.
./drivers/usb/gadget/usbstring.c:77: warning: Function parameter or member 'langid' not described in 'usb_validate_langid'
./drivers/usb/gadget/usbstring.c:77: warning: Excess function parameter 'lang' description in 'usb_validate_langid'
Signed-off-by: Colton Lewis <colton.w.lewis@protonmail.com>
Link: https://lore.kernel.org/r/20200707045207.235540-1-colton.w.lewis@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If wakeup event occurred by extcon event, it needs to call
ci_irq again since the first ci_irq calling at extcon notifier
only wakes up controller, but do noop for event handling,
it causes the extcon use case can't work well from low power mode.
Cc: <stable@vger.kernel.org>
Fixes: 3ecb3e09b0 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Reported-by: Philippe Schenker <philippe.schenker@toradex.com>
Tested-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On devices which do not support break signalling a break condition is
simulated by sending a NUL byte at the lowest possible speed. The break
condition will be 9 bit periods long (start bit and eight data bits),
but the transmission itself also includes the stop bit.
Add the missing safety margin of one bit which is intended to account
for timing differences, and fix up the corresponding comment.
Signed-off-by: Michael Hanselmann <public@hansmi.ch>
Link: https://lore.kernel.org/r/9909b288-294d-16b9-9f14-51eb79c63b6c@msgid.hansmi.ch
[ johan: amend commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
CP210x hardware disables auto-RTS but leaves auto-CTS when in hardware
flow control mode and UART on cp210x hardware is disabled. When
re-opening the port, if auto-CTS is enabled on the cp210x, then auto-RTS
must be re-enabled in the driver.
Signed-off-by: Brant Merryman <brant.merryman@silabs.com>
Co-developed-by: Phu Luu <phu.luu@silabs.com>
Signed-off-by: Phu Luu <phu.luu@silabs.com>
Link: https://lore.kernel.org/r/ECCF8E73-91F3-4080-BE17-1714BC8818FB@silabs.com
[ johan: fix up tags and problem description ]
Fixes: 39a66b8d22 ("[PATCH] USB: CP2101 Add support for flow control")
Cc: stable <stable@vger.kernel.org> # 2.6.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Assign the .throttle and .unthrottle functions to be generic function
in the driver structure to prevent data loss that can otherwise occur
if the host does not enable USB throttling.
Signed-off-by: Brant Merryman <brant.merryman@silabs.com>
Co-developed-by: Phu Luu <phu.luu@silabs.com>
Signed-off-by: Phu Luu <phu.luu@silabs.com>
Link: https://lore.kernel.org/r/57401AF3-9961-461F-95E1-F8AFC2105F5E@silabs.com
[ johan: fix up tags ]
Fixes: 39a66b8d22 ("[PATCH] USB: CP2101 Add support for flow control")
Cc: stable <stable@vger.kernel.org> # 2.6.12
Signed-off-by: Johan Hovold <johan@kernel.org>
A subset of all CH341 devices don't support a real break condition. This
fact is already used in the "ch341_detect_quirks" function. With this
change a quirk is implemented to simulate a break condition by
temporarily lowering the baud rate and sending a NUL byte.
The primary drawbacks of this approach are that the duration of the
break can't be controlled by userland and that data incoming during
a simulated break is corrupted.
The "TTY_DRIVER_HARDWARE_BREAK" serial driver flag was investigated as
an alternative. It's a driver-wide flag and would've required
significant changes to the serial and USB-serial driver frameworks to
expose it for individual USB-serial adapters.
Tested by sending a break condition and watching the TX pin using an
oscilloscope.
Signed-off-by: Michael Hanselmann <public@hansmi.ch>
Link: https://lore.kernel.org/r/f34a9b6e-ec2a-0873-e97b-2d5b2170e2ff@msgid.hansmi.ch
[ johan: condense info message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
The value of 'maxsize' has not been checked since commit 729cac693e
("usb: dwc2: Change ISOC DDMA flow") back in 2018, so remove the set but
unused variable, which fixes the following W=1 kernel build warning:
drivers/usb/dwc2/gadget.c: In function ‘dwc2_gadget_fill_isoc_desc’:
drivers/usb/dwc2/gadget.c:885:6: warning: variable ‘maxsize’ set but not used [-Wunused-but-set-variable]
885 | u32 maxsize = 0;
| ^~~~~~~
Cc: Minas Harutyunyan <hminas@synopsys.com>
Cc: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No idea why this driver is using a char device node, statically
allocated, with no dynamic allocation or hook up with devtmpfs, along
with a reserverd major number, for "special" operations, not all of
which ever were implemented.
So just rip it out, as no one must be using it because no modern system
will ever actually create the /dev/ node it needs.
Cc: Felipe Balbi <balbi@kernel.org>
Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200702072914.1072878-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file has a HUGE debugging sysfs file that spews out a lot of
information all at once, which violates the one-value-per-file rule for
sysfs. If this is really needed, it should go into debugfs, but given
the age of this driver, I strongly doubt anyone is using it anymore.
So just remove the file entirely, it was never documented, so obviously,
no one actually needed it :)
Cc: Felipe Balbi <balbi@kernel.org>
Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
Link: https://lore.kernel.org/r/20200702072914.1072878-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we assign 'epnum' during the declaration we can also avoid "ISO
C90 forbids mixed declarations" issues. So it does looks like we
can have our cake and eat it in this scenario.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/oxu210hp-hcd.c: In function ‘submit_async’:
drivers/usb/host/oxu210hp-hcd.c:2040:19: warning: variable ‘qtd’ set but not used [-Wunused-but-set-variable]
2040 | struct ehci_qtd *qtd;
| ^~~
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Cc: "Eurotech S.p.A" <info@eurtech.it>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'queue' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'node' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'hep' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'dev' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'next_frame' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ly_base_addr' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'port_length' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'pid_ep' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'dev_addr' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ctrl_reg' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'status' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'retry_cnt' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'residue' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'next_td_addr' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'td_list' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'td_addr' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'data' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'urb' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'privdata' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ep_data' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'pipe' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'c67x00' not described in 'dbg_td'
drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'td' not described in 'dbg_td'
drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'msg' not described in 'dbg_td'
drivers/usb/c67x00/c67x00-sched.c:169: warning: Function parameter or member 'a' not described in 'frame_add'
drivers/usb/c67x00/c67x00-sched.c:169: warning: Function parameter or member 'b' not described in 'frame_add'
drivers/usb/c67x00/c67x00-sched.c:177: warning: Function parameter or member 'a' not described in 'frame_after'
drivers/usb/c67x00/c67x00-sched.c:177: warning: Function parameter or member 'b' not described in 'frame_after'
drivers/usb/c67x00/c67x00-sched.c:186: warning: Function parameter or member 'a' not described in 'frame_after_eq'
drivers/usb/c67x00/c67x00-sched.c:186: warning: Function parameter or member 'b' not described in 'frame_after_eq'
drivers/usb/c67x00/c67x00-sched.c:199: warning: Function parameter or member 'c67x00' not described in 'c67x00_release_urb'
drivers/usb/c67x00/c67x00-sched.c:199: warning: Function parameter or member 'urb' not described in 'c67x00_release_urb'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'c67x00' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'urb' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'data' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'len' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'pid' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'toggle' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'privdata' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:692: warning: Function parameter or member 'c67x00' not described in 'c67x00_add_ctrl_urb'
drivers/usb/c67x00/c67x00-sched.c:692: warning: Function parameter or member 'urb' not described in 'c67x00_add_ctrl_urb'
drivers/usb/c67x00/c67x00-sched.c:830: warning: Function parameter or member 'c67x00' not described in 'c67x00_parse_td'
drivers/usb/c67x00/c67x00-sched.c:830: warning: Function parameter or member 'td' not described in 'c67x00_parse_td'
drivers/usb/c67x00/c67x00-sched.c:978: warning: Function parameter or member 'c67x00' not described in 'c67x00_check_td_list'
drivers/usb/c67x00/c67x00-sched.c:1052: warning: Function parameter or member 'c67x00' not described in 'c67x00_send_td'
drivers/usb/c67x00/c67x00-sched.c:1052: warning: Function parameter or member 'td' not described in 'c67x00_send_td'
drivers/usb/c67x00/c67x00-sched.c:1088: warning: Function parameter or member 'c67x00' not described in 'c67x00_do_work'
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-31-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Demote usbtmc's file header to a standard comment block.
Fixes the following W=1 kernel build warning(s):
drivers/usb/class/usbtmc.c:11: warning: Function parameter or member 'fmt' not described in 'pr_fmt'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-30-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/c67x00/c67x00-ll-hpi.c:269: warning: Function parameter or member 'sie' not described in 'c67x00_ll_usb_clear_status'
drivers/usb/c67x00/c67x00-ll-hpi.c:269: warning: Function parameter or member 'bits' not described in 'c67x00_ll_usb_clear_status'
drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'dev' not described in 'c67x00_ll_write_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'addr' not described in 'c67x00_ll_write_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'data' not described in 'c67x00_ll_write_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'len' not described in 'c67x00_ll_write_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'dev' not described in 'c67x00_ll_read_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'addr' not described in 'c67x00_ll_read_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'data' not described in 'c67x00_ll_read_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'len' not described in 'c67x00_ll_read_mem_le16'
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-27-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'zlp' was documented, but in the wrong place.
Fixes the following W=1 kernel build warning(s):
drivers/usb/cdns3/ep0.c:36: warning: Function parameter or member 'zlp' not described in 'cdns3_ep0_run_transfer'
drivers/usb/cdns3/ep0.c:705: warning: Excess function parameter 'zlp' description in 'cdns3_gadget_ep0_queue'
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Pawel Jez <pjez@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-23-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/ohci.h in included by a whole much of different
sourcefiles. Not all of them make use of cc_to_error. So mark
it as __maybe_used to convey that this behaviour is not only
acceptable it's expected.
Fixes the following kernel build warning(s):
In file included from drivers/usb/host/ohci-pci.c:25:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-platform.c:32:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-exynos.c:20:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-spear.c:22:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-st.c:26:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-at91.c:31:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-s3c2410.c:32:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Roman Weissgaerber <weissg@vienna.at>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-22-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neither usb_hcd_at91_probe() nor usb_hcd_at91_remove()'s function
headers reach the standards required of a kerneldoc entry. Only
one attempt at describing an argument was made, as it is not
correct (we're removing that too to save confusion).
Fixes the following kernel build warning(s):
drivers/usb/host/ohci-at91.c:166: warning: Function parameter or member 'driver' not described in 'usb_hcd_at91_probe'
drivers/usb/host/ohci-at91.c:166: warning: Function parameter or member 'pdev' not described in 'usb_hcd_at91_probe'
drivers/usb/host/ohci-at91.c:259: warning: Function parameter or member 'hcd' not described in 'usb_hcd_at91_remove'
drivers/usb/host/ohci-at91.c:259: warning: Function parameter or member 'pdev' not described in 'usb_hcd_at91_remove'
drivers/usb/host/ohci-at91.c:259: warning: Excess function parameter 'dev' description in 'usb_hcd_at91_remove'
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It would seem a shame to strip out all of the unused register entries,
since they can act as a fair source of documentation. Instead, mark
them all as __maybe_unused to show the build system that this behaviour
is known and intentional.
Fixes the following kernel build warning(s):
In file included from drivers/usb/host/isp1362-hcd.c:96:
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGALTTMR’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:199:1: note: in expansion of macro ‘ISP1362_REG’
199 | ISP1362_REG(OTGALTTMR, 0x6C, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGTIMER’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:198:1: note: in expansion of macro ‘ISP1362_REG’
198 | ISP1362_REG(OTGTIMER, 0x6A, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGINTENB’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:197:1: note: in expansion of macro ‘ISP1362_REG’
197 | ISP1362_REG(OTGINTENB, 0x69, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGINT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:196:1: note: in expansion of macro ‘ISP1362_REG’
196 | ISP1362_REG(OTGINT, 0x68, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGSTATUS’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:195:1: note: in expansion of macro ‘ISP1362_REG’
195 | ISP1362_REG(OTGSTATUS, 0x67, REG_WIDTH_16, REG_ACCESS_R);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGCONTROL’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:194:1: note: in expansion of macro ‘ISP1362_REG’
194 | ISP1362_REG(OTGCONTROL, 0x62, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCATLPORT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:183:1: note: in expansion of macro ‘ISP1362_REG’
183 | ISP1362_REG(HCATLPORT, 0x44, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCINTLPORT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:175:1: note: in expansion of macro ‘ISP1362_REG’
175 | ISP1362_REG(HCINTLPORT, 0x43, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCISTL1PORT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:171:1: note: in expansion of macro ‘ISP1362_REG’
171 | ISP1362_REG(HCISTL1PORT, 0x42, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCISTL0PORT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:170:1: note: in expansion of macro ‘ISP1362_REG’
170 | ISP1362_REG(HCISTL0PORT, 0x40, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCINTDIS’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:77:1: note: in expansion of macro ‘ISP1362_REG’
77 | ISP1362_REG(HCINTDIS, 0x05, REG_WIDTH_32, REG_ACCESS_RW);
| ^~~~~~~~~~~
Cc: "by L. Wassmann" <LW@KARO-electronics.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mainline misspelled function argument descriptions. Also one
formatting issue with a missing '@' identifier.
Fixes the following W=1 build warnings:
drivers/usb/cdns3/gadget.c:653: warning: Function parameter or member 'priv_ep' not described in 'cdns3_wa2_descmissing_packet'
drivers/usb/cdns3/gadget.c:653: warning: Excess function parameter 'priv_dev' description in 'cdns3_wa2_descmissing_packet'
drivers/usb/cdns3/gadget.c:1088: warning: Function parameter or member 'request' not described in 'cdns3_ep_run_transfer'
drivers/usb/cdns3/gadget.c:2574: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_set_halt'
drivers/usb/cdns3/gadget.c:2574: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_set_halt'
drivers/usb/cdns3/gadget.c:2595: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_clear_halt'
drivers/usb/cdns3/gadget.c:2595: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_clear_halt'
drivers/usb/cdns3/gadget.c:2898: warning: Function parameter or member 'priv_dev' not described in 'cdns3_init_eps'
drivers/usb/cdns3/gadget.c:2898: warning: Excess function parameter 'cdns3' description in 'cdns3_init_eps'
drivers/usb/cdns3/gadget.c:3210: warning: Function parameter or member 'cdns' not described in 'cdns3_gadget_init'
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Pawel Jez <pjez@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add some missing function argument descriptions for 'ep', 'desc'
and 'zlp', and correct spelling/bitrot issues surrounding the
correct spelling of present args.
Fixes the following W=1 warnings:
drivers/usb/cdns3/ep0.c:36: warning: Function parameter or member 'zlp' not described in 'cdns3_ep0_run_transfer'
drivers/usb/cdns3/ep0.c:236: warning: Function parameter or member 'ctrl' not described in 'cdns3_req_ep0_get_status'
drivers/usb/cdns3/ep0.c:236: warning: Excess function parameter 'ctrl_req' description in 'cdns3_req_ep0_get_status'
drivers/usb/cdns3/ep0.c:411: warning: Function parameter or member 'ctrl' not described in 'cdns3_req_ep0_handle_feature'
drivers/usb/cdns3/ep0.c:411: warning: Excess function parameter 'ctrl_req' description in 'cdns3_req_ep0_handle_feature'
drivers/usb/cdns3/ep0.c:661: warning: Function parameter or member 'ep' not described in 'cdns3_gadget_ep0_enable'
drivers/usb/cdns3/ep0.c:661: warning: Function parameter or member 'desc' not described in 'cdns3_gadget_ep0_enable'
drivers/usb/cdns3/ep0.c:671: warning: Function parameter or member 'ep' not described in 'cdns3_gadget_ep0_disable'
drivers/usb/cdns3/ep0.c:867: warning: Function parameter or member 'priv_ep' not described in 'cdns3_init_ep0'
drivers/usb/cdns3/ep0.c:867: warning: Excess function parameter 'ep_priv' description in 'cdns3_init_ep0'
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Pawel Jez <pjez@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
