For an external clock source, which is gated via a GPIO, the
rate change should typically be propagated to the parent clock.
The situation where we are requiring this propagation, is when an
external clock is connected to override an internal clock (which typically
has a fixed rate). The external clock can have a different rate than the
internal one, and may also be variable, thus requiring the rate
propagation.
This rate change wasn't propagated until now, and it's unclear about cases
where this shouldn't be propagated. Thus, it's unclear whether this is
fixing a bug, or extending the current driver behavior. Also, it's unsure
about whether this may break any existing setups; in the case that it does,
a device-tree property may be added to disable this flag.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lkml.kernel.org/r/20191108071718.17985-1-alexandru.ardelean@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The SM8150 list of clks is almost the same as the list for SDM845,
except there isn't an IPA clk. Just point to the SDM845 clks from the
SM8150 list for now so we can reduce the amount of struct bloat in this
driver.
Suggested-by: Vinod Koul <vkoul@kernel.org>
Cc: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20191107214018.184105-1-sboyd@kernel.org
Reviewed-by: Vinod Koul <vkoul@kernel.org>
The buffer allocated in ti_adpll_clk_get_name doesn't account for the
terminating null. This patch switches to devm_kasprintf to avoid
overflowing.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lkml.kernel.org/r/20191019140634.15596-1-steve@sk2.org
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
RCLK is a fixed 50MHz clock derived from HPLL/HCLK that is described by a
single gate for each MAC.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lkml.kernel.org/r/20191010020725.3990-3-andrew@aj.id.au
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There are a few manually-calculated variable-length struct allocations
left, this converts them to use struct_size. Found with the following
git grep command
git grep -A1 'kzalloc.*sizeof[^_].*+'
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lkml.kernel.org/r/20190927185110.29897-1-steve@sk2.org
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
[sboyd@kernel.org: Add grep command]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
merged this merge window. The Amlogic driver was missing some flags
causing rates to be rounded improperly or clk_set_rate() to fail. The
Samsung driver wasn't freeing everything on error paths and improperly
saving/restoring PLL state across suspend/resume. The at91 driver was
calling msleep() too early when scheduling hadn't started, so we put in
place a quick solution until we can handle this sort of problem in the
core framework. There were also problems with the Allwinner driver and
operator precedence being incorrect causing subtle bugs. Finally, the TI
driver was duplicating aliases and not delaying long enough leading to
some unexpected timeouts.
-----BEGIN PGP SIGNATURE-----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=0xes
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes for various clk driver issues that happened because of code we
merged this merge window.
The Amlogic driver was missing some flags causing rates to be rounded
improperly or clk_set_rate() to fail. The Samsung driver wasn't
freeing everything on error paths and improperly saving/restoring PLL
state across suspend/resume. The at91 driver was calling msleep() too
early when scheduling hadn't started, so we put in place a quick
solution until we can handle this sort of problem in the core
framework.
There were also problems with the Allwinner driver and operator
precedence being incorrect causing subtle bugs. Finally, the TI driver
was duplicating aliases and not delaying long enough leading to some
unexpected timeouts"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call
clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18
clk: sunxi: Fix operator precedence in sunxi_divs_clk_setup
clk: ast2600: Fix enabling of clocks
clk: at91: avoid sleeping early
clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARM
clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume
clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU
clk: samsung: exynos5433: Fix error paths
clk: at91: sam9x60: fix programmable clock
clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes
clk: meson: g12a: fix cpu clock rate setting
clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate
Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just
some constant ratio from the input across the entire frequency range. It
would be great if we could specify the frequency table as a single entry
constant ratio instead of a long list, ie:
{ .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 },
{ }
So, lets support that.
We need to fix a corner case in qcom_find_freq() where if the freq table
is non-null, but has no frequencies, we end up returning an "entry" before
the table array, which is bad. Then, we need ignore the freq from the
table, and instead base everything on the requested freq.
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191031185715.15504-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When MSM8998 support was added, and analysis was done to determine what
clocks would be consumed. That analysis had a flaw, which caused the
pnoc to be skipped. The pnoc clock needs to be on to access the uart
for the console. The clock is on from boot, but has no consumer votes
in the RPM. When we attempt to boot the modem, it causes the RPM to
turn off pnoc, which kills our access to the console and causes CPU hangs.
We need pnoc to be defined, so that clk_smd_rpm_handoff() will put in
an implicit vote for linux and prevent issues when booting modem.
Hopefully pnoc can be consumed by the interconnect framework in future
so that Linux can rely on explicit votes.
Fixes: 6131dc8121 ("clk: qcom: smd: Add support for MSM8998 rpm clocks")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191107190615.5656-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We need to control five additional clocks and a reset inorder to boot the
modem on msm8998. If we can boot the modem, we have a place to run the
wlan firmware and get wifi up and running.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191107192136.5880-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the global clock controller found on SC7180
based devices. This should allow most non-multimedia device
drivers to probe and control their clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/20191014102308.27441-6-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Return NULL in the cases where the clk_hw is not registered with the
clock provider, but the clock consumer still requests for a clock id.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/20191014102308.27441-3-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Update the init data name for each of the dynamic frequency switch
controlled clock associated with the RCG clock name, so that it can be
generated as per the hardware plan. Thus update the macro accordingly.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/20191014102308.27441-2-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the Q6SSTOP clock control used on qcs404
based devices. This would allow wcss remoteproc driver to
control the required WCSS Q6SSTOP clock/reset controls to
bring the subsystem out of reset and shutdown the WCSS Q6DSP.
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Link: https://lkml.kernel.org/r/20191011132928.9388-3-govinds@codeaurora.org
[sboyd@kernel.org: Sort makefile]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Initialize the clock drivers on sdm845 and qcs404 in core_initcall so we
can have earlier access to cpufreq during booting.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/75ae9c3a1c0e69b95818c6ffe7181fdeaaf2d70e.1571656015.git.amit.kucheria@linaro.org
Video-In and -Out interconnect clocks need to stay on all the
time for the peripheral to work and we do not model the actual
interconnect at this point. So mark them as critical for now.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20190917081903.25139-4-heiko@sntech.de
The clocks in the px30 critical clock section are from the regular cru not
the pmucru, so move them to the correct place.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20190917081903.25139-3-heiko@sntech.de
Some IPs, such as NAND, EMMC, SDIO and SDMMC need clock of 50% duty
cycle, divfree50 can generate clock of 50% duty cycle even in odd
value divisor.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917081903.25139-2-heiko@sntech.de
MBUS clock will be referenced in MBUS controller node.
Export it.
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXb2lYgAKCRDj7w1vZxhR
xX++AP931wTnnYugarLm6km0xXE/UZhYl+XBbRnUYqe+a3aN5AD9EoyuhZ3hpNzM
juyr/D9G17u6WBHFWaZdXwOp0ylIYgA=
=hj+3
-----END PGP SIGNATURE-----
Merge tag 'sunxi-clk-fixes-for-5.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes
Two patches that fix some operator precedence and zeroing of bits
* tag 'sunxi-clk-fixes-for-5.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18
clk: sunxi: Fix operator precedence in sunxi_divs_clk_setup
Commit 3d8598fb9c ("clk: ti: clkctrl: use fallback udelay approach if
timekeeping is suspended") added handling for cases when timekeeping is
suspended. But looks like we can still get occasional "failed to enable"
errors on the PM runtime resume path with udelay() returning faster than
expected.
With ti-sysc interconnect target module driver this leads into device
failure with PM runtime failing with "failed to enable" clkctrl error.
Let's fix the issue with a delay of two times the desired delay as in
often done for udelay() to account for the inaccuracy.
Fixes: 3d8598fb9c ("clk: ti: clkctrl: use fallback udelay approach if timekeeping is suspended")
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lkml.kernel.org/r/20190930154001.46581-1-tony@atomide.com
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
It is not correct that sys3_pll_out use sys2_pll1_ref_sel as parent.
According to the current imx_clk_sccg_pll design, it uses both
bypass1/2, however set bypass2 as 1 is not correct, because it will
make sys[x]_pll_out use wrong parent and might access wrong registers.
So correct bypass2 to 0 and fix sys3_pll_out_sels.
Fixes: e9dda4af68 ("clk: imx: Refactor entire sccg pll clk")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the R-Car M3-W+ (R8A77961) SoC to the Renesas Clock
Pulse Generator / Module Standby and Software Reset driver.
R-Car M3-W+ is very similar to R-Car M3-W (R8A77960), which allows for
both SoCs to share a driver. R-Car M3-W+ lacks a few modules, so their
clocks must be nullified.
Based on a patch in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023122941.12342-5-geert+renesas@glider.be
Rename CONFIG_CLK_R8A7796 for R-Car M3-W (R8A77960) to
CONFIG_CLK_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961),
which will use CONFIG_CLK_R8A77961.
Extend the dependency of CONFIG_CLK_R8A77960 from CONFIG_ARCH_R8A7796 to
CONFIG_ARCH_R8A77960, to relax dependencies for a future rename of the
SoC configuration symbol.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023122941.12342-4-geert+renesas@glider.be
There is no need to terminate a function with a semicolon. Remove it.
Reported-by: Biju Das <biju.das@bp.renesas.com>
Fixes: 7ce36da900 ("clk: renesas: cpg-mssr: Add support for R-Car M3-N")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191016150711.30305-1-geert+renesas@glider.be
The existing width field used to check divider validity does not provide
enough protection against bad values. For example, if max divider value
is 4, the smallest all-1 bitmask that can hold this value is 7, which
allows values higher than 4 to be used. This typically causes
unpredictable results with hardware. So far this issue hasn't been
noticed as most of the dividers actually have maximum values which fit
the whole bitfield, but there are certain clocks for which this is a
problem, like dpll4_m4 divider on omap3 devices.
Thus, convert the whole validity logic to use min,max and mask values
for determining if a specific divider is valid or not. This prevents
the odd cases where bad value would otherwise be written to a divider
config register.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Adam Ford <aford173@gmail.com>
Cleanup the ti_clk_parse_divider_data to pass the divider data struct
directly instead of individual values of it. This makes it easier
to modify the implementation later on.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Adam Ford <aford173@gmail.com>
Cleanup couple of TI divider clock internal APIs. These currently pass
huge amount of parameters, which makes it difficult to track what is
going on. Abstract most of these under struct clk_omap_div which gets
passed over the APIs.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Adam Ford <aford173@gmail.com>
Due to the way ti sysc and hardreset line control is now implemented,
it is not possible to poll the clock status for gfx clock independent
of hardreset line control. Thus, add a flag to prevent handling this
status bit from clock driver. Correct sequencing of events is guaranteed
by ti-sysc bus driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Due to the way ti sysc and hardreset line control is now implemented,
it is not possible to poll the clock status for gfx clock independent
of hardreset line control. Thus, add a flag to prevent handling this
status bit from clock driver. Correct sequencing of events is guaranteed
by ti-sysc bus driver.
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The PRUSS module on AM33xx SoCs has a hardreset line and is controlled
by a PRCM reset line. Any clkctrl enable/disable operations cannot be
checked for module enabled/disabled status independent of the reset
operation, and this causes some unwanted timeouts in the kernel and
unbalanced states for the PRUSS clocks. These details should be handled
by the driver integration code itself.
Add the CLKF_NO_IDLEST flag to the PRUSS clkctrl clock so that these
module status checks are skipped.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The PRUSS modules on AM43xx SoCs have a hardreset line and are controlled
by a PRCM reset line. Any clkctrl enable/disable operations cannot be
checked for module enabled/disabled status independent of the reset
operation, and this causes some unwanted timeouts in the kernel and
unbalanced states for the PRUSS clocks. These details should be handled
by the driver integration code itself.
Add the CLKF_NO_IDLEST flag to the PRUSS clkctrl clock so that these
module status checks are skipped.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The IPU and DSP remote processor cores and their corresponding MMUs on
OMAP5 SoCs have hardreset lines associated with them and are controlled
by a PRCM reset line each. Any clkctrl enable/disable operations cannot
be checked for module enabled/disabled status independent of the reset
operation, and this causes some unwanted timeouts in the kernel and
unbalanced states for these clocks. These details should be handled by
the driver integration code itself.
Add the CLKF_NO_IDLEST flag to both the IPU and DSP clkctrl clocks so
that these module status checks are skipped.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The IPU and DSP remote processor cores and their corresponding MMUs on
OMAP4 SoCs have hardreset lines associated with them and are controlled
by a PRCM reset line each. Any clkctrl enable/disable operations cannot
be checked for module enabled/disabled status independent of the reset
operation, and this causes some unwanted timeouts in the kernel and
unbalanced states for these clocks. These details should be handled by
the driver integration code itself.
Add the CLKF_NO_IDLEST flag to both the IPU and DSP clkctrl clocks so
that these module status checks are skipped.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The IPU and DSP remote processor cores and their corresponding MMUs on
DRA7 SoCs have hardreset lines associated with them and are controlled
by a PRCM reset line each. Any clkctrl enable/disable operations cannot
be checked for module enabled/disabled status independent of the reset
operation, and this causes some unwanted timeouts in the kernel and
unbalanced states for these clocks. These details should be handled by
the driver integration code itself.
Add the CLKF_NO_IDLEST flag to both the IPU and DSP clkctrl clocks so
that these module status checks are skipped.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Standby status is provided for certain clkctrl clocks to see if the
given module has entered standby or not. This is mostly needed by
remoteproc code to see if the remoteproc has entered standby and the clock
can be turned off safely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Apply the proper register function for clkctrl clocks, so they get
registered under the clk_hw_omap list also. This allows checking their
type runtime.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The clk_half_divider_ops is not used outside or declared
outside of drivers/clk/rockchip/clk-half-divider.c so make
it static to avoid the following warning:
drivers/clk/rockchip/clk-half-divider.c:142:22: warning: symbol 'clk_half_divider_ops' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20191017105348.8061-1-ben.dooks@codethink.co.uk
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add CLK_SET_RATE_PARENT flag to all clocks on the path from VPLL to G3D,
so the G3D MALI driver can simply adjust the rate of its clock by doing
a single clk_set_rate() call, without the need to know the whole clock
topology in Exynos542x SoCs.
Suggested-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Save and restore top PLL related configuration registers for big (APLL)
and LITTLE (KPLL) cores during suspend/resume cycle. So far, CPU clocks
were reset to default values after suspend/resume cycle and performance
after system resume was affected when performance governor has been selected.
Fixes: 773424326b ("clk: samsung: exynos5420: add more registers to restore list")
Signed-off-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Add new table rate for VPLL for Exynos 542x SoC required to support
Mali GPU clock frequencies.
Signed-off-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
The zero'ing of bits 16 and 18 is incorrect. Currently the code
is masking with the bitwise-and of BIT(16) & BIT(18) which is
0, so the updated value for val is always zero. Fix this by bitwise
and-ing value with the correct mask that will zero bits 16 and 18.
Addresses-Coverity: (" Suspicious &= or |= constant expression")
Fixes: b8eb71dcdd ("clk: sunxi-ng: Add A80 CCU")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
r375326 in Clang exposes an issue with operator precedence in
sunxi_div_clk_setup:
drivers/clk/sunxi/clk-sunxi.c:1083:30: warning: operator '?:' has lower
precedence than '|'; '|' will be evaluated first
[-Wbitwise-conditional-parentheses]
data->div[i].critical ?
~~~~~~~~~~~~~~~~~~~~~ ^
drivers/clk/sunxi/clk-sunxi.c:1083:30: note: place parentheses around
the '|' expression to silence this warning
data->div[i].critical ?
^
)
drivers/clk/sunxi/clk-sunxi.c:1083:30: note: place parentheses around
the '?:' expression to evaluate it first
data->div[i].critical ?
^
(
1 warning generated.
It appears that the intention was for ?: to be evaluated first so that
CLK_IS_CRITICAL could be added to clkflags if the critical boolean was
set; right now, | is being evaluated first. Add parentheses around the
?: block to have it be evaluated first.
Fixes: 9919d44ff2 ("clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks")
Link: https://github.com/ClangBuiltLinux/linux/issues/745
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The struct clk_ops enable callback for the aspeed gates mixes up the set
to clear and write to set registers.
Fixes: d3d04f6c33 ("clk: Add support for AST2600 SoC")
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lkml.kernel.org/r/20191016131319.31318-1-joel@jms.id.au
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As now we also need to probe in the reset driver as well.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20191001182546.70090-1-john.stultz@linaro.org
[sboyd@kernel.org: Add comment about reset driver]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
It is not allowed to sleep to early in the boot process and this may lead
to kernel issues if the bootloader didn't prepare the slow clock and main
clock.
This results in the following error and dump stack on the AriettaG25:
bad: scheduling from the idle thread!
Ensure it is possible to sleep, else simply have a delay.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20190920153906.20887-1-alexandre.belloni@bootlin.com
Fixes: 80eded6ce8 ("clk: at91: add slow clks driver")
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The mipi pll clock comes from the MIPI PHY PLL output, so
it should not be a fixed clock.
MIPI PHY PLL is in the MIPI DSI space, and it is used as
the bit clock for transferring the pixel data out and its
output clock is configured according to the display mode.
So it should be used only for MIPI DSI and not be exported
out for other usages.
Signed-off-by: Fancy Fang <chen.fang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
During cpu frequency switching the main "CLK_ARM" is reparented to an
intermediate "step" clock. On imx8mm and imx8mn the 24M oscillator is
used for this purpose but it is extremely slow, increasing wakeup
latencies to the point that i2c transactions can timeout and system
becomes unresponsive.
Fix by switching the "step" clk to SYS_PLL1_800M, matching the behavior
of imx8m cpufreq drivers in imx vendor tree.
This bug was not immediately apparent because upstream arm64 defconfig
uses the "performance" governor by default so no cpufreq transitions
happen.
Fixes: ba5625c3e2 ("clk: imx: Add clock driver support for imx8mm")
Fixes: 96d6392b54 ("clk: imx: Add support for i.MX8MN clock driver")
Cc: stable@vger.kernel.org
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Link: https://lkml.kernel.org/r/f5d2b9c53f1ed5ccb1dd3c6624f56759d92e1689.1571771777.git.leonard.crestez@nxp.com
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
imx_obtain_fixed_clk_hw could be used to simplify code to replace
__clk_get_hw(of_clk_get_by_name(node, "name"))
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx_obtain_fixed_clk_hw could be used to simplify code to replace
__clk_get_hw(of_clk_get_by_name(node, "name"))
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx_obtain_fixed_clk_hw could be used to simplify code to replace
__clk_get_hw(of_clk_get_by_name(node, "name"))
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx_obtain_fixed_clk_hw could be used to simplify code to replace
__clk_get_hw(of_clk_get_by_name(node, "name"))
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In the latest reference manual Rev.0,06/2019, the DDR clock mux
is extended to 2 bits, and the clock options are also changed,
correct them accordingly.
Fixes: b1260067ac ("clk: imx: add imx7ulp clk driver")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Properly save and restore all top PLL related configuration registers
during suspend/resume cycle. So far driver only handled EPLL and RPLL
clocks, all other were reset to default values after suspend/resume cycle.
This caused for example lower G3D (MALI Panfrost) performance after system
resume, even if performance governor has been selected.
Reported-by: Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Fixes: 773424326b ("clk: samsung: exynos5420: add more registers to restore list")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
According Architecture definition guide, SYS1_PLL is fixed at
800MHz, SYS2_PLL is fixed at 1000MHz, so let's use imx_clk_fixed
to register the clocks and drop code that could change the rate.
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According Architecture definition guide, SYS_PLL1 is fixed at
800MHz, SYS_PLL2 is fixed at 1000MHz, so let's use imx_clk_fixed
to register the clocks and drop code that could change the rate.
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According Architecture definition guide, SYS_PLL1 is fixed at
800MHz, SYS_PLL2 is fixed at 1000MHz, so let's use imx_clk_fixed
to register the clocks and drop code that could change the rate.
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On imx8mn there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2
each with their own gate. Only one of these gates (the one "dividing" by
one) is currently defined and it's incorrectly set as the parent of all
the fixed-factor dividers.
Add the other 8 gates to the clock tree between sys_pll1/2_bypass and
the fixed dividers.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On imx8mm there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2
each with their own gate. Only one of these gates (the one "dividing" by
one) is currently defined and it's incorrectly set as the parent of all
the fixed-factor dividers.
Add the other 8 gates to the clock tree between sys_pll1/2_bypass and
the fixed dividers.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On imx8mq there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2
each with their own gate but these gates are not currently defined in
the clock tree.
Add them between sys1/2_pll_out and the fixed dividers.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
G3D clocks require special handling of their parent bus clock during power
domain on/off sequences. Those clocks were not initially added to the
sub-CMU handler, because that time there was no open-source driver for the
G3D (MALI Panfrost) hardware module and it was not possible to test it.
This patch fixes this issue. Parent clock for G3D hardware block is now
properly preserved during G3D power domain on/off sequence. This restores
proper MALI Panfrost performance broken by commit 8686764fc0
("ARM: dts: exynos: Add G3D power domain to Exynos542x").
Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Fixes: b06a532bf1 ("clk: samsung: Add Exynos5 sub-CMU clock driver")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marian Mihailescu <mihailescu2m@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Add checking the value returned by samsung_clk_alloc_reg_dump() and
devm_kcalloc(). While fixing this, also release all gathered clocks.
Fixes: 523d3de41f ("clk: samsung: exynos5433: Add support for runtime PM")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
[s.nawrocki: squashed patch from K. Kozlowski adding missing slab.h header]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
This tag includes initial support for the Marvell MMP3 processor.
MMP3 is used in OLPC XO-4 laptops, Panasonic Toughpad FZ-A1 tablet
and Dell Wyse 3020/Tx0D thin clients.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEENyn6vISEy07peidTpxZjkszkJRYFAl2ofPMPHGxrdW5kcmFr
QHYzLnNrAAoJEKcWY5LM5CUWcI4H/RlhFZ1Nngu8P19ZPb66GCf27SKgAXvucocN
na6EPBmL+vB0BnlpkXTOtvsOL6riSat/DnUgg4gyCQFVV1SAZdEjnnVAFCEyWSWU
Omc4XDxh6b/geelCElGVCcnomCWvibrkKny1a8bViJdJbVb3lvSou4ZLNNv55uoh
OamyM2yxCgDNQRlvaizfGNbzOCedfCHnFV3eyNx1kMe+OGcSuJe+AZ6Toh045fb9
GWTMeG80AJhWtowcpB5Ivrh31XR3PScOGDOwOlqbyAOao/MalRsBx2Yz+XQ/IceL
RivJ/ImeY/czjFSn2DrsV/nlQDhHP3fjxrtZyUNFV6A8EkHSX0M=
=1Ju7
-----END PGP SIGNATURE-----
Merge tag 'mmp-soc-for-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp into arm/soc
ARM: Marvell MMP SoC patches for v5.5
This tag includes initial support for the Marvell MMP3 processor.
MMP3 is used in OLPC XO-4 laptops, Panasonic Toughpad FZ-A1 tablet
and Dell Wyse 3020/Tx0D thin clients.
* tag 'mmp-soc-for-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp:
MAINTAINERS: mmp: add Git repository
ARM: mmp: remove MMP3 USB PHY registers from regs-usb.h
ARM: mmp: move cputype.h to include/linux/soc/
ARM: mmp: add SMP support
ARM: mmp: add support for MMP3 SoC
ARM: mmp: define MMP_CHIPID by the means of CIU_REG()
ARM: mmp: DT: convert timer driver to use TIMER_OF_DECLARE
ARM: mmp: map the PGU as well
ARM: mmp: don't select CACHE_TAUROS2 on all ARCH_MMP
ARM: l2c: add definition for FWA in PL310 aux register
Link: https://lore.kernel.org/r/3a035bed90f9d8acc49b2d11d20089b546062aea.camel@v3.sk
Signed-off-by: Olof Johansson <olof@lixom.net>
As the .round_rate() callback returns a long clock rate, it cannot
return clock rates that do not fit in signed long, but do fit in
unsigned long. Hence switch the SD clocks on R-Car Gen3 from the old
.round_rate() callback to the newer .determine_rate() callback, which
does not suffer from this limitation.
This includes implementing range checking.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20190830134515.11925-9-geert+renesas@glider.be
As the .round_rate() callback returns a long clock rate, it cannot
return clock rates that do not fit in signed long, but do fit in
unsigned long. Hence switch the Z clocks on R-Car Gen3 from the old
.round_rate() callback to the newer .determine_rate() callback, which
does not suffer from this limitation.
This includes implementing range checking.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20190830134515.11925-8-geert+renesas@glider.be
As the .round_rate() callback returns a long clock rate, it cannot
return clock rates that do not fit in signed long, but do fit in
unsigned long. Hence switch the Z clock on R-Car Gen2 from the old
.round_rate() callback to the newer .determine_rate() callback, which
does not suffer from this limitation.
This includes implementing range checking.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20190830134515.11925-7-geert+renesas@glider.be
Similar to MMP2, which this patch is based on. Known differencies from MMP2
are:
* Two PJ4B cores instead of one PJ4
* Tauros 3 L2 cache controller instead of Tauros 2
* A GIC interrupt controller optionally used instead of the MMP one
* A TWD local timer
* Different USB2 PHY
* A USB3 SS controller
* More interrupt muxes
Hard to tell what else is different, because documentation is not
available.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
This fixes the clock rate propagation for the g12a cpu clocks and
the gxbb adc clock.
-----BEGIN PGP SIGNATURE-----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=QSFw
-----END PGP SIGNATURE-----
Merge tag 'clk-meson-fixes-v5.4-1' of https://github.com/BayLibre/clk-meson into clk-fixes
Pull first round of amlogic clock fixes from Jerome Brunet:
- This fixes the clock rate propagation for the g12a cpu and gxbb adc clocks.
* tag 'clk-meson-fixes-v5.4-1' of https://github.com/BayLibre/clk-meson:
clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes
clk: meson: g12a: fix cpu clock rate setting
clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate
drivers/clk/clk-ast2600.c:119:27: warning:
eclk_parent_names defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lkml.kernel.org/r/20191015115117.23504-1-yuehaibing@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Fix sparse warnings:
drivers/clk/imx/clk-pll14xx.c:44:37:
warning: symbol 'imx_pll1416x_tbl' was not declared. Should it be static?
drivers/clk/imx/clk-pll14xx.c:57:37:
warning: symbol 'imx_pll1443x_tbl' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This clock is needed by DCSS when high resolutions are used.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
CC: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add sm1 support the axg audio clock controllers. This new version is
indeed derived from the previous generation, as always, adding a few
new clocks to the mix.
The number of gates now exceeds 32 and do not fit in a single register.
Unfortunately, designers chose to introduce the new gate register
immediately after the original one, at the beginning of the register
space, shifting all the master clock register offsets.
The sm1 also introduce a few mux and divider on the top clock path,
possibly to lower the peripheral clocks of the audio blocks if
necessary.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The peripheral clock on the sm1 goes through some muxes
and dividers before reaching the audio gates. To model that,
without repeating our self too much, the "top" clock signal
is introduced and will serve as a the parent of the gates.
On the axg and g12a, the top clock is just a pass-through to
the audio peripheral clock provided by the main controller.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Rearrange the macro definition of the clocks of the axg-audio
controller. Also, the sm1 variant will feature tiny modification
of different blocks in this controller. Because of that, we need
to fallback to the old way of defining parent for some of the
clocks, using signal name.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Since the addition of the g12a, the last register is
AUDIO_CLK_SPDIFOUT_B_CTRL.
Fixes: 075001385c ("clk: meson: axg-audio: add g12a support")
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Defining the number of each input type is no longer necessary since
we are not using the clk-input hack anymore
Fixes: 282420eed2 ("clk: meson: axg-audio: migrate to the new parent description method")
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Use common 1413X/1416X PLL clock structure to save a lot
of duplicated code on i.MX8MN clock driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
