Unless the platform has eMCA related capability, don't
need to check if there is conflict with EDAC driver.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
To avoid saving two copies for one H/W event, add a new
file under debugfs to control how to save event log.
Once this file is opened, the perf/trace will be used,
in the meanwhile, kernel will stop printing event log
to the console. On the other hand, if this file is closed,
kernel will print event log to the console again.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Add trace interface to elaborate all H/W error related information.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Release IOAPIC pin associated with PCI device when the PCI device
is disabled.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Link: http://lkml.kernel.org/r/1402380987-32577-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* acpi-general:
ACPI: use kstrto*() instead of simple_strto*()
* acpi-processor:
ACPI / processor replace __attribute__((packed)) by __packed
* acpi-lpss:
ACPI / LPSS: Take I2C host controllers out of reset
* acpi-battery:
ACPI / battery: add quirk for Acer Aspire V5-573G
ACPI / battery: use callback for setting up quirks
simple_strto*() are obsolete; use kstrto*() instead. Add proper error
checking.
Signed-off-by: Christoph Jaeger <christophjaeger@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On Acer Aspire V5-573G battery notifications are sometimes
triggered too early. For example, when AC is unplugged and
notification is triggered, battery state is still reported as
"Full", and changes to "Discharging" only after short delay,
without any notification.
This patch solves the problem by adding 1 second sleep.
Similar quirk is already implemented in AC driver for other laptop.
Signed-off-by: Alexander Mezin <mezin.alexander@gmail.com>
Acked-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use callback for setting up quirk instead of checking return code
of dmi_check_system(). This change will allow using bat_dmi_table
for other quirks.
Signed-off-by: Alexander Mezin <mezin.alexander@gmail.com>
Acked-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On Intel Baytrail, some I2C host controllers are held in reset when the OS
gets control. This causes the driver to fail to detect the hardware
properly.
Fix this so that we make sure that the I2C host controller is not in reset
when the driver gets probe'd.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The following commit has changed ACPICA table header definitions:
Commit: 88f074f487
Subject: ACPI, CPER: Update cper info
While such definitions are currently maintained in ACPICA. As the
modifications applying to the table definitions affect other OSPMs'
drivers, it is very difficult for ACPICA to initiate a process to
complete the merge. Thus this commit finally only leaves us divergences.
Revert such naming modifications to reduce the source code differecnes
between Linux and ACPICA upstream. No functional changes.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Bob Moore <robert.moore@intel.com>
Cc: Chen, Gong <gong.chen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-general:
ACPI: Fix bug when ACPI reset register is implemented in system memory
* acpi-video:
ACPI / video: Change the default for video.use_native_backlight to 1
Adds trace events that give finer resolution into suspend/resume. These
events are graphed in the timelines generated by the analyze_suspend.py
script. They represent large areas of time consumed that are typical to
suspend and resume.
The event is triggered by calling the function "trace_suspend_resume"
with three arguments: a string (the name of the event to be displayed
in the timeline), an integer (case specific number, such as the power
state or cpu number), and a boolean (where true is used to denote the start
of the timeline event, and false to denote the end).
The suspend_resume trace event reproduces the data that the machine_suspend
trace event did, so the latter has been removed.
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that we're hoping to have resolved all of the problems with
video.use_native_backlight=1, make that the default at last.
Link: http://marc.info/?l=linux-acpi&m=139716088401106&w=2
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use acpi_os_map_generic_address to pre-map the reset register if it is
memory mapped, thereby preventing the BUG_ON() in line 1319 of
mm/vmalloc.c from triggering during panic-triggered reboots.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=77131
Signed-off-by: Randy Wright <rwright@hp.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
[rjw: Changelog, simplified code]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- ACPICA update to upstream version 20140424. That includes a
number of fixes and improvements related to things like GPE
handling, table loading, headers, memory mapping and unmapping,
DSDT/SSDT overriding, and the Unload() operator. The acpidump
utility from upstream ACPICA is included too. From Bob Moore,
Lv Zheng, David Box, David Binderman, and Colin Ian King.
- Fixes and cleanups related to ACPI video and backlight interfaces
from Hans de Goede. That includes blacklist entries for some new
machines and using native backlight by default.
- ACPI device enumeration changes to create platform devices
rather than PNP devices for ACPI device objects with _HID by
default. PNP devices will still be created for the ACPI device
object with device IDs corresponding to real PNP devices, so
that change should not break things left and right, and we're
expecting to see more and more ACPI-enumerated platform devices
in the future. From Zhang Rui and Rafael J Wysocki.
- Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing
it to handle system suspend/resume on Asus T100 correctly.
From Heikki Krogerus and Rafael J Wysocki.
- PM core update introducing a mechanism to allow runtime-suspended
devices to stay suspended over system suspend/resume transitions
if certain additional conditions related to coordination within
device hierarchy are met. Related PM documentation update and
ACPI PM domain support for the new feature. From Rafael J Wysocki.
- Fixes and improvements related to the "freeze" sleep state. They
affect several places including cpuidle, PM core, ACPI core, and
the ACPI battery driver. From Rafael J Wysocki and Zhang Rui.
- Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.
- Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
Aggregator Device) drivers from Baoquan He, Manuel Schölling,
Tony Camuso, and Toshi Kani.
- System suspend/resume optimization in the ACPI battery driver from
Lan Tianyu.
- OPP (Operating Performance Points) subsystem updates from
Chander Kashyap, Mark Brown, and Nishanth Menon.
- cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
Stratos Karafotis, and Viresh Kumar.
- Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
Viresh Kumar.
- intel_pstate driver fixes and cleanups from Dirk Brandewie,
Doug Smythies, and Stratos Karafotis.
- Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.
- Fix for the cpuidle menu governor from Chander Kashyap.
- New ARM clps711x cpuidle driver from Alexander Shiyan.
- Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
Fabian Frederick, Pali Rohár, and Sebastian Capella.
- Intel RAPL (Running Average Power Limit) driver updates from
Jacob Pan.
- PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.
- devfreq core updates from Chanwoo Choi and Paul Bolle.
- devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
Bartlomiej Zolnierkiewicz.
- turbostat tool fix from Jean Delvare.
- cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
and Thomas Renninger.
- New ACPI ec_access.c tool for poking at the EC in a safe way
from Thomas Renninger.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=tpdF
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next
Pull ACPI and power management updates from Rafael Wysocki:
"ACPICA is the leader this time (63 commits), followed by cpufreq (28
commits), devfreq (15 commits), system suspend/hibernation (12
commits), ACPI video and ACPI device enumeration (10 commits each).
We have no major new features this time, but there are a few
significant changes of how things work. The most visible one will
probably be that we are now going to create platform devices rather
than PNP devices by default for ACPI device objects with _HID. That
was long overdue and will be really necessary to be able to use the
same drivers for the same hardware blocks on ACPI and DT-based systems
going forward. We're not expecting fallout from this one (as usual),
but it's something to watch nevertheless.
The second change having a chance to be visible is that ACPI video
will now default to using native backlight rather than the ACPI
backlight interface which should generally help systems with broken
Win8 BIOSes. We're hoping that all problems with the native backlight
handling that we had previously have been addressed and we are in a
good enough shape to flip the default, but this change should be easy
enough to revert if need be.
In addition to that, the system suspend core has a new mechanism to
allow runtime-suspended devices to stay suspended throughout system
suspend/resume transitions if some extra conditions are met
(generally, they are related to coordination within device hierarchy).
However, enabling this feature requires cooperation from the bus type
layer and for now it has only been implemented for the ACPI PM domain
(used by ACPI-enumerated platform devices mostly today).
Also, the acpidump utility that was previously shipped as a separate
tool will now be provided by the upstream ACPICA along with the rest
of ACPICA code, which will allow it to be more up to date and better
supported, and we have one new cpuidle driver (ARM clps711x).
The rest is improvements related to certain specific use cases,
cleanups and fixes all over the place.
Specifics:
- ACPICA update to upstream version 20140424. That includes a number
of fixes and improvements related to things like GPE handling,
table loading, headers, memory mapping and unmapping, DSDT/SSDT
overriding, and the Unload() operator. The acpidump utility from
upstream ACPICA is included too. From Bob Moore, Lv Zheng, David
Box, David Binderman, and Colin Ian King.
- Fixes and cleanups related to ACPI video and backlight interfaces
from Hans de Goede. That includes blacklist entries for some new
machines and using native backlight by default.
- ACPI device enumeration changes to create platform devices rather
than PNP devices for ACPI device objects with _HID by default. PNP
devices will still be created for the ACPI device object with
device IDs corresponding to real PNP devices, so that change should
not break things left and right, and we're expecting to see more
and more ACPI-enumerated platform devices in the future. From
Zhang Rui and Rafael J Wysocki.
- Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it
to handle system suspend/resume on Asus T100 correctly. From
Heikki Krogerus and Rafael J Wysocki.
- PM core update introducing a mechanism to allow runtime-suspended
devices to stay suspended over system suspend/resume transitions if
certain additional conditions related to coordination within device
hierarchy are met. Related PM documentation update and ACPI PM
domain support for the new feature. From Rafael J Wysocki.
- Fixes and improvements related to the "freeze" sleep state. They
affect several places including cpuidle, PM core, ACPI core, and
the ACPI battery driver. From Rafael J Wysocki and Zhang Rui.
- Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.
- Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony
Camuso, and Toshi Kani.
- System suspend/resume optimization in the ACPI battery driver from
Lan Tianyu.
- OPP (Operating Performance Points) subsystem updates from Chander
Kashyap, Mark Brown, and Nishanth Menon.
- cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
Stratos Karafotis, and Viresh Kumar.
- Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
Viresh Kumar.
- intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug
Smythies, and Stratos Karafotis.
- Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.
- Fix for the cpuidle menu governor from Chander Kashyap.
- New ARM clps711x cpuidle driver from Alexander Shiyan.
- Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
Fabian Frederick, Pali Rohár, and Sebastian Capella.
- Intel RAPL (Running Average Power Limit) driver updates from Jacob
Pan.
- PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.
- devfreq core updates from Chanwoo Choi and Paul Bolle.
- devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
Bartlomiej Zolnierkiewicz.
- turbostat tool fix from Jean Delvare.
- cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
and Thomas Renninger.
- New ACPI ec_access.c tool for poking at the EC in a safe way from
Thomas Renninger"
* tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits)
ACPICA: Namespace: Remove _PRP method support.
intel_pstate: Improve initial busy calculation
intel_pstate: add sample time scaling
intel_pstate: Correct rounding in busy calculation
intel_pstate: Remove C0 tracking
PM / hibernate: fixed typo in comment
ACPI: Fix x86 regression related to early mapping size limitation
ACPICA: Tables: Add mechanism to control early table checksum verification.
ACPI / scan: use platform bus type by default for _HID enumeration
ACPI / scan: always register ACPI LPSS scan handler
ACPI / scan: always register memory hotplug scan handler
ACPI / scan: always register container scan handler
ACPI / scan: Change the meaning of missing .attach() in scan handlers
ACPI / scan: introduce platform_id device PNP type flag
ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
ACPI / PNP: use device ID list for PNPACPI device enumeration
ACPI / scan: .match() callback for ACPI scan handlers
ACPI / battery: wakeup the system only when necessary
power_supply: allow power supply devices registered w/o wakeup source
...
* acpi-video:
ACPI / video: Add 4 new models to the use_native_backlight DMI list
ACPI / video: Add use native backlight quirk for the ThinkPad W530
ACPI / video: Unregister the backlight device if a raw one shows up later
backlight: Add backlight device (un)registration notification
nouveau: Don't check acpi_video_backlight_support() before registering backlight
acer-wmi: Add Aspire 5741 to video_vendor_dmi_table
acer-wmi: Switch to acpi_video_unregister_backlight
ACPI / video: Add an acpi_video_unregister_backlight function
ACPI / video: Don't register acpi_video_resume notifier without backlight devices
ACPI / video: change acpi-video brightness_switch_enabled default to 0
* acpica: (63 commits)
ACPICA: Namespace: Remove _PRP method support.
ACPI: Fix x86 regression related to early mapping size limitation
ACPICA: Tables: Add mechanism to control early table checksum verification.
ACPICA: acpidump: Fix repetitive table dump in -n mode.
ACPI: Clean up acpi_os_map/unmap_memory() to eliminate __iomem.
ACPICA: Clean up redudant definitions already defined elsewhere
ACPICA: Linux headers: Add <asm/acenv.h> to remove mis-ordered inclusion of <asm/acpi.h>
ACPICA: Linux headers: Add <acpi/platform/aclinuxex.h>
ACPICA: Linux headers: Remove ACPI_PREEMPTION_POINT() due to no usages.
ACPICA: Update version to 20140424.
ACPICA: Comment/format update, no functional change.
ACPICA: Events: Update GPE handling and initialization code.
ACPICA: Remove extraneous error message for large number of GPEs.
ACPICA: Tables: Remove old mechanism to validate if XSDT contains NULL entries.
ACPICA: Tables: Add new mechanism to skip NULL entries in RSDT and XSDT.
ACPICA: acpidump: Add support to force using RSDT.
ACPICA: Back port of improvements on exception code.
ACPICA: Back port of _PRP update.
ACPICA: acpidump: Fix truncated RSDP signature validation.
ACPICA: Linux header: Add support for stubbed externals.
...
* acpi-enumeration:
ACPI / scan: use platform bus type by default for _HID enumeration
ACPI / scan: always register ACPI LPSS scan handler
ACPI / scan: always register memory hotplug scan handler
ACPI / scan: always register container scan handler
ACPI / scan: Change the meaning of missing .attach() in scan handlers
ACPI / scan: introduce platform_id device PNP type flag
ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
ACPI / PNP: use device ID list for PNPACPI device enumeration
ACPI / scan: .match() callback for ACPI scan handlers
* acpi-pm:
ACPI / PM: Export rest of the subsys PM callbacks
ACPI / PM: Avoid resuming devices in ACPI PM domain during system suspend
ACPI / PM: Hold ACPI scan lock over the "freeze" sleep state
ACPI / PM: Export acpi_target_system_state() to modules
* acpi-battery:
ACPI / battery: wakeup the system only when necessary
power_supply: allow power supply devices registered w/o wakeup source
ACPI / battery: introduce support for POWER_SUPPLY_PROP_CAPACITY_LEVEL
ACPI / battery: Accelerate battery resume callback
* acpi-tables:
ACPI: Fix conflict between customized DSDT and DSDT local copy
* acpi-general:
ACPI: Add acpi_bus_attach_private_data() to attach data to ACPI handle
* acpi-processor:
ACPI / processor: Fix STARTING/DYING action in acpi_cpu_soft_notify()
ACPI / processor: Check if LAPIC is present during initialization
ACPI / ia64: introduce variable acpi_lapic into ia64
* acpi-pad:
ACPI / PAD: Use time_before() for time comparison
ACPI / PAD: call schedule() when need_resched() is true
* acpi-scan:
ACPI / scan: do not scan fixed hardware on HW-reduced platform
* acpi-hotplug:
ACPI: add dynamic_debug support
ACPI / notify: Clean up handling of hotplug events
* acpi-pci:
ACPI / PCI: Stub out pci_acpi_crs_quirks() and make it x86 specific
development cycle:
- Antoine Tenart made the get_group_pins() vtable entry
optional.
- Antoine also provides an entirely new driver for the
Marvell Berlin SoC. This is unrelated to the existing
MVEBU hardware driver and warrants its own separate
driver.
- Reflected from the GPIO subsystem there is a number of
refactorings to make pin control drivers with gpiochips
use the new gpiolib irqchip helpers. The following
drivers were converted to use the new infrastructure:
- ST Microelectronics STiH416 and friends
- The Atmel AT91
- The CSR SiRF (Prima2)
- The Qualcomm MSM series
- Massive improvements in the Qualcomm MSM driver from
Bjorn Andersson, Andy Gross and Kumar Gala. Among those
new support for the IPQ8064 and MSM8x74 SoC variants.
- Support for the Freescale i.MX6 SoloX SoC variant.
- Massive improvements in the Allwinner sunxi driver from
Boris Brezillon, Maxime Ripard and Chen-Yu Tsai.
- Renesas PFC updates from Laurent Pinchart, Kuninori
Morimoto, Wolfram Sang and Magnus Damm.
- Cleanups and refactorings of the nVidia Tegra driver from
Stepgen Warren.
- The Exynos driver now supports the Exynos3250 SoC.
- Intel BayTrail updates from Jin Yao, Mika Westerberg.
- The MVEBU driver now supports the Orion5x SoC
variants, which is part of the effort of getting rid of
the old Marvell kludges in arch/arm/mach-orion5x
- Rockchip driver updates from Heiko Stuebner.
- A ton of cleanups and janitorial patches from Axel Lin.
- Some minor fixes and improvements here and there.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wGE5
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into next
Pull pin control changes from Linus Walleij:
"This is the bulk of pin control changes for the v3.16 development
cycle:
- Antoine Tenart made the get_group_pins() vtable entry optional.
- Antoine also provides an entirely new driver for the Marvell Berlin
SoC. This is unrelated to the existing MVEBU hardware driver and
warrants its own separate driver.
- reflected from the GPIO subsystem there is a number of refactorings
to make pin control drivers with gpiochips use the new gpiolib
irqchip helpers. The following drivers were converted to use the
new infrastructure:
* ST Microelectronics STiH416 and friends
* The Atmel AT91
* The CSR SiRF (Prima2)
* The Qualcomm MSM series
- massive improvements in the Qualcomm MSM driver from Bjorn
Andersson, Andy Gross and Kumar Gala. Among those new support for
the IPQ8064 and MSM8x74 SoC variants.
- support for the Freescale i.MX6 SoloX SoC variant.
- massive improvements in the Allwinner sunxi driver from Boris
Brezillon, Maxime Ripard and Chen-Yu Tsai.
- Renesas PFC updates from Laurent Pinchart, Kuninori Morimoto,
Wolfram Sang and Magnus Damm.
- Cleanups and refactorings of the nVidia Tegra driver from Stepgen
Warren.
- the Exynos driver now supports the Exynos3250 SoC.
- Intel BayTrail updates from Jin Yao, Mika Westerberg.
- the MVEBU driver now supports the Orion5x SoC variants, which is
part of the effort of getting rid of the old Marvell kludges in
arch/arm/mach-orion5x
- Rockchip driver updates from Heiko Stuebner.
- a ton of cleanups and janitorial patches from Axel Lin.
- some minor fixes and improvements here and there"
* tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (93 commits)
pinctrl: sirf: fix a bad conflict resolution
pinctrl: msm: Add more MSM8X74 pin definitions
pinctrl: qcom: ipq8064: Fix naming convention
pinctrl: msm: Add missing sdc1 and sdc3 groups
pinctrl: sirf: switch to using allocated state container
pinctrl: Enable "power-source" to be extracted from DT files
pinctrl: sunxi: create irq/pin mapping during init
pinctrl: pinconf-generic: Use kmemdup instead of kmalloc + memcpy
pinctrl: berlin: Use devm_ioremap_resource()
pinctrl: sirf: fix typo for GPIO bank number
pinctrl: sunxi: depend on RESET_CONTROLLER
pinctrl: sunxi: fix pin numbers passed to register offset helpers
pinctrl: add pinctrl driver for imx6sx
pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs
pinctrl: msm: switch to using generic GPIO irqchip helpers
pinctrl: sunxi: Fix multiple registration issue
pinctrl: sunxi: Fix recursive dependency
pinctrl: berlin: add the BG2CD pinctrl driver
pinctrl: berlin: add the BG2 pinctrl driver
pinctrl: berlin: add the BG2Q pinctrl driver
...
The _PRP method is not going to be a part of the ACPI standard. This patch
removes its support code introduced by the following commits:
1. ACPICA: Predefined names: Add support for the _PRP method.
2. ACPICA: Update for _PRP predefined name.
3. ACPICA: Add support for _LPD and _PRP methods.
4. ACPICA: Back port of _PRP update.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The following warning message is triggered:
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:136 __early_ioremap+0x11f/0x1f2()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.15.0-rc1-00017-g86dfc6f3-dirty #298
Hardware name: Intel Corporation S2600CP/S2600CP, BIOS SE5C600.86B.99.99.x036.091920111209 09/19/2011
0000000000000009 ffffffff81b75c40 ffffffff817c627b 0000000000000000
ffffffff81b75c78 ffffffff81067b5d 000000000000007b 8000000000000563
00000000b96b20dc 0000000000000001 ffffffffff300e0c ffffffff81b75c88
Call Trace:
[<ffffffff817c627b>] dump_stack+0x45/0x56
[<ffffffff81067b5d>] warn_slowpath_common+0x7d/0xa0
[<ffffffff81067c3a>] warn_slowpath_null+0x1a/0x20
[<ffffffff81d4b9d5>] __early_ioremap+0x11f/0x1f2
[<ffffffff81d4bc5b>] early_ioremap+0x13/0x15
[<ffffffff81d2b8f3>] __acpi_map_table+0x13/0x18
[<ffffffff817b8d1a>] acpi_os_map_memory+0x26/0x14e
[<ffffffff813ff018>] acpi_tb_acquire_table+0x42/0x70
[<ffffffff813ff086>] acpi_tb_validate_table+0x27/0x37
[<ffffffff813ff0e5>] acpi_tb_verify_table+0x22/0xd8
[<ffffffff813ff6a8>] acpi_tb_install_non_fixed_table+0x60/0x1c9
[<ffffffff81d61024>] acpi_tb_parse_root_table+0x218/0x26a
[<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
[<ffffffff81d610cd>] acpi_initialize_tables+0x57/0x59
[<ffffffff81d5f25d>] acpi_table_init+0x1b/0x99
[<ffffffff81d2bca0>] acpi_boot_table_init+0x1e/0x85
[<ffffffff81d23043>] setup_arch+0x99d/0xcc6
[<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
[<ffffffff81d1bbbe>] start_kernel+0x8b/0x415
[<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
[<ffffffff81d1b5ee>] x86_64_start_reservations+0x2a/0x2c
[<ffffffff81d1b72e>] x86_64_start_kernel+0x13e/0x14d
---[ end trace 11ae599a1898f4e7 ]---
when installing the following table during early stage:
ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL S2600CP 00004000 INTL 20100331)
The regression is caused by the size limitation of the x86 early IO mapping.
The root cause is:
1. ACPICA doesn't split IO memory mapping and table mapping;
2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map
mechanism during early boot stage, which is more suitable for only IO
mappings.
This patch fixes this issue by utilizing acpi_gbl_verify_table_checksum to
disable the table mapping during early stage and enabling it again for the
late stage. In this way, the normal code path is not affected. Then after
the code related to the root cause is cleaned up, the early checksum
verification can be easily re-enabled.
A new boot parameter - acpi_force_table_verification is introduced for
the platforms that require the checksum verification to stop loading bad
tables.
This fix also covers the checksum verification for the table overrides. Now
large tables can also be overridden using the initrd override mechanism.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that Linux x86 kernel cannot map large tables. The following
large SSDT table on such platform fails to pass checksum verification and
cannot be installed:
ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL S2600CP 00004000 INTL 20100331)
It sounds strange that in the 64-bit virtual memory address space, we
cannot map a single ACPI table to do checksum verification. The root cause
is:
1. ACPICA doesn't split IO memory mapping and table mapping;
2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map
mechanism during early boot stage, which is more suitable for only IO
mappings.
ACPICA originally only mapped table header for signature validation, and
this header mapping is required by OSL override mechanism. There was no
checksum verification because we could not map the whole table using this
OSL. While the following ACPICA commit enforces checksum verification by
mapping the whole table during Linux boot stage and it finally triggers
this issue on some platforms:
Commit: 86dfc6f339
Subject: ACPICA: Tables: Fix table checksums verification before installation.
Before doing further cleanups for the OSL table mapping and override
implementation, this patch introduces an option for such OSPMs to
temporarily discard the checksum verification feature. It then can be
re-enabled easily when the ACPICA and the underlying OSL is ready.
This patch also deletes a comment around the limitation of mappings because
it is not correct. The limitation is not how many times we can map in the
early stage, but the OSL mapping facility may not be suitable for mapping
the ACPI tables and thus may complain us the size limitation.
The acpi_tb_verify_table() is renamed to acpi_tb_verify_temp_table() due to the
work around added, it now only applies to the table descriptor that hasn't
been installed and cannot be used in other cases. Lv Zheng.
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because of the growing demand for enumerating ACPI devices to
platform bus, change the code to enumerate ACPI device objects to
platform bus by default. Namely, create platform devices for the
ACPI device objects that
1. Have pnp.type.platform_id set (device objects with _HID currently).
2. Do not have a scan handler attached.
3. Are not SPI/I2C slave devices (that should be enumerated to the
appropriate buses bus by their parent).
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Subject and changelog, rebase and code cleanup]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Prevent platform devices from being created for ACPI LPSS devices
if CONFIG_X86_INTEL_LPSS is unset by compiling out the LPSS scan
handler's callbacks only in that case and still compiling its device
ID list in and registering the scan handler in either case.
This change is based on a prototype from Zhang Rui.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Prevent platform devices from being created for ACPI memory device
objects if CONFIG_ACPI_HOTPLUG_MEMORY is unset by compiling out the
memory hotplug scan handler's callbacks only in that case and still
compiling its device ID list in and registering the scan handler in
either case.
Also unset the memory hotplug scan handler's .attach() callback
if acpi_no_memhotplug is set, but still register the scan handler to
avoid creating platform devices for ACPI memory devices in that case
too.
This change is based on a prototype from Zhang Rui.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Prevent platform devices from being created for ACPI containers
if CONFIG_ACPI_CONTAINER is unset by compiling out the container
scan handler's callbacks only in that case and still compiling
its device ID list in and registering the scan handler in either
case.
This change is based on a prototype from Zhang Rui.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Currently, some scan handlers can be compiled out entirely, which
leaves the device objects they normally attach to without a scan
handler. This isn't a problem as long as we don't have any default
enumeration mechanism that applies to all devices without a scan
handler. However, if such a default enumeration is added, it still
should not be applied to devices that are normally attached to by
scan handlers, because that may result in creating "physical" device
objects of a wrong type for them.
Since we are going to create platform device objects for all ACPI
device objects with pnp.type.platform_id set by default, clear
pnp.type.platform_id where there is a matching scan handler without
an .attach() callback and otherwise simply treat that scan handler
as though the .attach() callback was present but always returned 0.
This will allow us to compile out scan handler callbacks and leave
the device ID lists used by them so as to prevent creating platform
device objects for the matching ACPI devices.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Only certain types of ACPI device objects can be enumerated as
platform devices, so in order to distinguish them from the others
introduce a new ACPI device PNP type flag, platform_id, and set it
for devices with a valid _HID to start with.
This change is based on a Zhang Rui's prototype.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The "serial" PNP driver supports some "unknown" PNP modems
(PNPCXXX/PNPDXXX) by matching magic strings in the PNP device name
or the PNP device card name.
ACPI enumerated PNP devices neither are PNP cards, nor have those
magic strings in device names, so this mechamism never actually works
for ACPI enumerated PNPCXXX/PNPDXXX devices.
Consequently, it is safe to remove those two IDs from the PNP ACPI scan
handler's device ID list.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The PNP ACPI scan handler device ID list includes all the IDs from
all of the struct pnp_device_id instances in the tree, but some of
them do not follow the ACPI PNP ID rule (3 letters + 4 hex digits).
For those IDs, the coressponding devices will never be enumerated
via ACPI, so it is safe to remove them from the PNP ACPI ID list.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
ACPI can be used to enumerate PNP devices, but the code does not
handle this in the right way currently. Namely, if an ACPI device
object
1. Has a _CRS method,
2. Has an identification of
"three capital characters followed by four hex digits",
3. Is not in the excluded IDs list,
it will be enumerated to PNP bus (that is, a PNP device object will
be create for it). This means that, actually, the PNP bus type is
used as the default bus type for enumerating _HID devices in ACPI.
However, more and more _HID devices need to be enumerated to the
platform bus instead (that is, platform device objects need to be
created for them). As a result, the device ID list in acpi_platform.c
is used to enforce creating platform device objects rather than PNP
device objects for matching devices. That list has been continuously
growing recently, unfortunately, and it is pretty much guaranteed to
grow even more in the future.
To address that problem it is better to enumerate _HID devices
as platform devices by default. To this end, change the way of
enumerating PNP devices by adding a PNP ACPI scan handler that
will use a device ID list to create PNP devices for the ACPI
device objects whose device IDs are present in that list.
The initial device ID list in the PNP ACPI scan handler contains
all of the pnp_device_id strings from all the existing PNP drivers,
so this change should be transparent to the PNP core and all of the
PNP drivers. Still, in the future it should be possible to reduce
its size by converting PNP drivers that need not be PNP for any
technical reasons into platform drivers.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Rewrote the changelog, modified the PNP ACPI scan handler code]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Introduce a .match() callback for ACPI scan handlers to allow them to
use more elaborate matching algorithms if necessary. That is needed
for the upcoming PNP scan handler in particular.
This change is based on a Zhang Rui's prototype.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
ACPI Battery device receives notifications from firmware frequently,
and most of these notifications are some general events, like battery
remaining capacity change, etc, which should not wake the system up
if the system is in suspend/hibernate state.
This causes a problem that the system wakes up from suspend to freeze
shortly, because there is an ACPI battery notification every 10 seconds.
Fix the problem in this patch by registering ACPI battery device'
own wakeup source, and waking up the system only when the battery remaining
capacity is critical low, or lower than the alarm capacity set via _BTP.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=76221
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI battery device receives notifications when
1. the remaining battery capacity becomes critical low
2. the trip point set by the _BTP (Design capacity of Warning by default)
is reached or crossed.
So it is able to support POWER_SUPPLY_PROP_CAPACITY_LEVEL to report
POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL,
POWER_SUPPLY_CAPACITY_LEVEL_LOW,
POWER_SUPPLY_CAPACITY_LEVEL_NORMAL,
POWER_SUPPLY_CAPACITY_LEVEL_FULL,
capacity levels to power supply core and user space.
Introduce support for POWER_SUPPLY_PROP_CAPACITY_LEVEL in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA doesn't include protections around address space checking, Linux
build tests always complain increased sparse warnings around ACPICA
internal acpi_os_map/unmap_memory() invocations. This patch tries to fix
this issue permanently.
There are 2 choices left for us to solve this issue:
1. Add __iomem address space awareness into ACPICA.
2. Remove sparse checker of __iomem from ACPICA source code.
This patch chooses solution 2, because:
1. Most of the acpi_os_map/unmap_memory() invocations are used for ACPICA.
table mappings, which in fact are not IO addresses.
2. The only IO addresses usage is for "system memory space" mapping code in:
drivers/acpi/acpica/exregion.c
drivers/acpi/acpica/evrgnini.c
drivers/acpi/acpica/exregion.c
The mapped address is accessed in the handler of "system memory space"
- acpi_ex_system_memory_space_handler(). This function in fact can be
changed to invoke acpi_os_read/write_memory() so that __iomem can
always be type-casted in the OSL layer.
According to the above investigation, we drew the following conclusion:
It is not a good idea to introduce __iomem address space awareness into
ACPICA mostly in order to protect non-IO addresses.
We can simply remove __iomem for acpi_os_map/unmap_memory() to remove
__iomem checker for ACPICA code. Then we need to enforce external usages
to invoke other APIs that are aware of __iomem address space.
The external usages are:
drivers/acpi/apei/einj.c
drivers/acpi/acpi_extlog.c
drivers/char/tpm/tpm_acpi.c
drivers/acpi/nvs.c
This patch thus performs cleanups in this way:
1. Add acpi_os_map/unmap_iomem() to be invoked by non-ACPICA code.
2. Remove __iomem from acpi_os_map/unmap_memory().
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To be future-proof and for better readability the time comparisons are
modified to use time_before() instead of plain, error-prone math.
Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Like all of the other *30 ThinkPad models, the W530 has a broken acpi-video
backlight control. Note in order for this to actually fix things on the
ThinkPad W530 the commit titled:
"nouveau: Don't check acpi_video_backlight_support() before registering backlight"
is also needed.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1093171
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When video.use_native_backlight=1 and non intel gfx are in use, the raw
backlight device of the gfx driver will show up after acpi-video has done its
acpi_video_verify_backlight_support() check.
This causes video.use_native_backlight=1 to not have the desired result.
This patch fixes this by adding a backlight notifier and when a raw
backlight is registered or unregistered re-doing the
acpi_video_verify_backlight_support() check.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use acpi_bus_attach_private_data() to attach private data
instead of acpi_attach_data().
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is already acpi_bus_get_private_data() to get ACPI handle data
which is associated with acpi_bus_private_data_handler(). This patch
is to add acpi_bus_attach_private_data() to make a pair and facilitate
to attach and get data to/from ACPI handle.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 1a699476e2 ("ACPI / hotplug / PCI: Hotplug notifications
from acpi_bus_notify()") added debug messages for a few common
events. These debug messages are unconditionally enabled if
CONFIG_DYNAMIC_DEBUG is defined, contrary to the documented
meaning, making the ACPI system spew lots of unwanted noise on
any kernel with dynamic debugging.
The bug was introduced by commit fbfddae696 ("ACPI: Add
acpi_handle_<level>() interfaces"), which added the
CONFIG_DYNAMIC_DEBUG dependency without respecting its meaning.
Fix by adding real support for dynamic_debug.
Fixes: fbfddae696 ("ACPI: Add acpi_handle_<level>() interfaces")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When the thermal module is to be removed, we should destroy the wq
acpi_thermal_pm_queue after the ACPI driver's remove callback is
executed as we will need to flush the workqueue there, or a NULL pointer
access will be hit.
Reported-and-tested-by: Kui Zhang <kuizhang@gmail.com>
References: http://www.spinics.net/lists/kernel/msg1747251.html
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This creates fractional divider type clock for the ones that
have it. It is needed by the UART driver as the clock rate must
accommodate to the requested baud rate.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A power domain where we save the context of the additional
LPSS registers. We need to do this or all LPSS devices are
left in reset state when resuming from D3 on some Baytrails.
The devices with the fractional clock divider also have
zeros for N and M values after resuming unless they are
reset.
Li Aubrey found the root cause for the issue. The idea of
using power domain for LPSS came from Mika Westerberg.
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Li Aubrey <aubrey.li@linux.intel.com>
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
[rjw: Added the .complete() callback to the PM domain, fixed build
warning on 32-bit.]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To seed up suspend and resume of devices included into Intel SoCs
handled by the ACPI LPSS driver during system suspend, make
acpi_lpss_create_device() call device_enable_async_suspend() for
every device created by it.
This requires acpi_create_platform_device() to be modified to return
a pointer to struct platform_device instead of an int. As a result,
acpi_create_platform_device() cannot be pointed to by the .attach
pointer in platform_handler directly any more, so a simple wrapper
around it is necessary for this purpose. That, in turn, allows the
second unused argument of acpi_create_platform_device() to be
dropped, which is an improvement.
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that the x86 dynamic IRQ allocation problem has been resolved with
commmit 62a08ae2a5 (genirq: x86: Ensure that dynamic irq allocation does
not conflict), we can add back Baytrail-T ACPI ID to the pinctrl driver.
This makes the driver to work on Asus T100 where it is needed for several
things like ACPI GPIO events and SD card detection.
References: https://bugzilla.kernel.org/show_bug.cgi?id=68291
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jin Yao <yao.jin@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add an acpi_video_unregister_backlight function, which only unregisters
the backlight device, and leaves the acpi_notifier in place. Some acpi_vendor
driver need this as they don't want the acpi_video# backlight device, but do
need the acpi-video driver for hotkey handling.
Chances are that this new acpi_video_unregister_backlight() is actually
what existing acpi_vendor drivers have wanted all along. Currently acpi_vendor
drivers which want to disable the acpi_video# backlight device, make 2 calls:
acpi_video_dmi_promote_vendor();
acpi_video_unregister();
The intention here is to make things independent of when acpi_video_register()
gets called. As acpi_video_register() will get called on acpi-video load time
on non intel gfx machines, while it gets called on i915 load time on intel
gfx machines.
This leads to the following 2 interesting scenarios:
a) intel gfx:
1) acpi-video module gets loaded (as it is a dependency of acpi_vendor
and i915)
2) acpi-video does NOT call acpi_video_register()
3) acpi_vendor loads (lets assume it loads before i915), calls
acpi_video_dmi_promote_vendor(); which sets
ACPI_VIDEO_BACKLIGHT_DMI_VENDOR
4) calls acpi_video_unregister -> not registered, nop
5) i915 loads, calls acpi_video_register
6) acpi_video_register registers the acpi_notifier for the hotkeys,
does NOT register a backlight device because of
ACPI_VIDEO_BACKLIGHT_DMI_VENDOR
b) non intel gfx
1) acpi-video module gets loaded (as it is a dependency acpi_vendor)
2) acpi-video calls acpi_video_register()
3) acpi_video_register registers the acpi_notifier for the hotkeys,
and a backlight device
4) acpi_vendor loads, calls acpi_video_dmi_promote_vendor()
5) calls acpi_video_unregister, this unregisters BOTH the acpi_notifier
for the hotkeys AND the backlight device
So here we have possibly the same acpi_vendor module, making the same calls,
but with different results, in one cases acpi-video does handle hotkeys,
in the other it does not.
Note that the a) scenario turns into b) if we assume the i915 module loads
before the vendor_acpi module, so we also have different behavior depending
on module loading order!
So as said I believe that quite a few existing acpi_vendor modules really
always want the behavior of a), hence this patch adds a new
acpi_video_unregister_backlight() which gives the behavior of a) independent
of module loading order.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
No reason for excluding the remaining ones.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
[rjw: Rebased and exported the new acpi_subsys_complete() too.]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rework the ACPI PM domain's PM callbacks to avoid resuming devices
during system suspend (in order to modify their wakeup settings etc.)
if that isn't necessary.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch fixes the following issue:
If DSDT is customized, no local DSDT copy is needed.
References: https://bugzilla.kernel.org/show_bug.cgi?id=69711
Signed-off-by: Enrico Etxe Arte <goitizena.generoa@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 2.6.35+ <stable@vger.kernel.org> # 2.6.35+
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Seems it helps some users, but causes issues for other users:
https://bugzilla.redhat.com/show_bug.cgi?id=1089545
So lets drop it for now until we've figured out a better fix.
Fixes: 43d9490244 (ACPI / video: Add use_native_backlight quirks for more systems)
References: https://bugzilla.redhat.com/show_bug.cgi?id=1089545
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
During CPU online/offline testing on a large system, one of the
processors got stuck after the message "bad: scheduling from the
idle thread!". The problem is that acpi_cpu_soft_notify() calls
acpi_bus_get_device() for all action types. CPU_STARTING and
CPU_DYING do not allow the notify handlers to sleep. However,
acpi_bus_get_device() can sleep in acpi_ut_acquire_mutex().
Change acpi_cpu_soft_notify() to return immediately for CPU_STARTING
and CPU_DYING as they have no action in this handler.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Most time of battery resume callback is spent on executing AML code
_BTP, _BIF and _BIF to get battery info, status and set alarm. These
AML methods may access EC operation regions several times and consumes
time.
These operations are not necessary during devices resume and can run
during POST_SUSPEND/HIBERNATION event when all processes are thawed.
This also can avoid removing and adding battery sysfs nodes every system
resume even if the battery unit is not actually changed. The original code
updates sysfs nodes without check and this seems not reasonable.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
These IDs are used on Baytrail boards such as Lenovo Miix 2
and Asus Transformer Book T100TA. On lenovo Miix 2 8",
BCM4752 is called LNV4752. All the rest of the IDs are for
Broadcom BCM43241 module with the ID referring to different
revision number.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In acpi_processor_get_info(), ACPI processor info is initialized including
ID, namely CPU index. Currently, on a UP system running an SMP kerenl with
no LAPIC in the MADT, cpu0_initialized is checked to decide whether or not
the CPU has been initialized.
However, this check may not be sufficient for kdump kernels. Most of time
only 1 CPU is supported because of known problems in kdump kernels. So say
the multiple CPUs are present in the boot kernel and a crash happens on
one specific CPU, say CPU2. Then it jumps into the kdump kernel with
"nr_cpus=1" in the command line. In this situation, the kdump kernel
will reuse the ACPI resources from the crashed kernel directly. That
means all LAPIC instances are enabled in the MADT while only one CPU is
in use. In the kdump kernel, x86_cpu_to_apicid contains the correct APIC
ID and it's related to the CPU ID. If cpu0_initialized is checked only, 0
will be used as the CPU index instead of that APIC ID, which is not
correct.
In addition to checking cpu0_initialized, check acpi_lapic. If acpi_lapic
is 0, then no LAPIC is available from the MADT and the system should be
treated as a UP one without a LAPIC (that is, assign 0 to the CPU index).
Otherwise, use the original (valid) CPU index.
Signed-off-by: Baoquan He <bhe@redhat.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If we're not going to be registering any backlight devices then
acpi_video_resume is always nop, so don't register it in that case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The "freeze" sleep state suffers from the same issue that was
addressed by commit ad07277e82 (ACPI / PM: Hold acpi_scan_lock over
system PM transitions) for ACPI sleep states, that is, things break
if ->remove() is called for devices whose system resume callbacks
haven't been executed yet.
It also can be addressed in the same way, by holding the ACPI scan
lock over the "freeze" sleep state and PM transitions to and from
that state, but ->begin() and ->end() platform operations for the
"freeze" sleep state are needed for this purpose.
This change has been tested on Acer Aspire S5 with Thunderbolt.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-video:
ACPI / video: correct DMI tag for Dell Inspiron 7520
ACPI / video: Add use_native_backlight quirks for more systems
* acpi-blacklist:
ACPI / blacklist: Add dmi_enable_osi_linux quirk for Asus EEE PC 1015PX
ACPI: blacklist win8 OSI for Dell Inspiron 7737
* acpi-ac:
ACPI: Revert "ACPI / AC: convert ACPI ac driver to platform bus"
* acpi-proc:
ACPI / proc: Do not say when /proc interfaces will be deleted in Kconfig
ACPI: Revert "ACPI / Battery: Remove battery's proc directory"
ACPI: Revert "ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c"
* acpica:
ACPICA: Tables: Restore old behavor to favor 32-bit FADT addresses.
ACPICA: Tables: Fix invalid pointer accesses in acpi_tb_parse_root_table().
* acpi-tpm:
ACPI / TPM: Fix resume regression on Chromebooks
* acpi-processor:
ACPI / processor: do not mark present at boot but not onlined CPU as onlined
We need to find a smarter way to switch to 64-bit FADT addresses according
to the bug report. This patch reverts Linux to the original behavior.
Fixes: 0249ed2444 (ACPICA: Add option to favor 32-bit FADT addresses.)
References: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Reported-and-tested-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The DMI tag used to identify Dell Inspiron 7520 should be product name
instead of product version.
Fixes: 0e9f81d3b7 (ACPI / video: Add systems that should favour native backlight interface)
Reported-and-tested-by: Téo Mazars <teomazars@gmail.com>
References: https://bugzilla.redhat.com/show_bug.cgi?id=909552
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Do not tell people in the Kconfig help when exactly we are going to
remove the deprecated ACPI interfaces in /proc, because, honestly,
we don't know. We will remove them when they are not used any more.
In particular, do not tell them that the interfaces will be removed
in a kernel release that already happened long ago.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Export the acpi_target_system_state() function to modules so that
modular drivers can use it to check what the target ACPI sleep state
of the system is (that is needed for i915 mostly at this point).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_processor_add() assumes that present at boot CPUs
are always onlined, it is not so if a CPU failed to become
onlined. As result acpi_processor_add() will mark such CPU
device as onlined in sysfs and following attempts to
online/offline it using /sys/device/system/cpu/cpuX/online
attribute will fail.
Do not poke into device internals in acpi_processor_add()
and touch "struct device { .offline }" attribute, since
for CPUs onlined at boot it's set by:
topology_init() -> arch_register_cpu() -> register_cpu()
before ACPI device tree is parsed, and for hotplugged
CPUs it's set when userspace onlines CPU via sysfs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit cc8ef52707 (ACPI / AC: convert ACPI ac driver to
platform bus) that is reported to break thermal management on
MacBook Air 2013 with ArchLinux.
Fixes: cc8ef52707 (ACPI / AC: convert ACPI ac driver to platform bus)
References: https://bugzilla.kernel.org/show_bug.cgi?id=71711
Cc: Zhang Rui <rui.zhang@intel.com>
Reported-and-tested-by: Manuel Krause <manuelkrause@netscape.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Without this this EEE PC exports a non working WMI interface, with this it
exports a working "good old" eeepc_laptop interface, fixing brightness control
not working as well as rfkill being stuck in a permanent wireless blocked
state.
This is not an ideal way to fix this, but various attempts to fix this
otherwise have failed, see:
References: https://bugzilla.redhat.com/show_bug.cgi?id=1067181
Reported-and-tested-by: lou.cardone@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With win8 capabiltiy, the machine will boot itself immediately after
shutdown command has executed.
Work around this issue by disabling win8 capcability. This workaround
also makes wireless hotkey work.
Signed-off-by: Edward Lin <yidi.lin@canonical.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi-video is unique in that it not only generates brightness up/down
keypresses, but also (sometimes) actively changes the brightness itself.
This presents an inconsistent kernel interface to userspace, basically there
are 2 different scenarios, depending on the laptop model:
1) On some laptops a brightness up/down keypress means: show a brightness osd
with the current brightness, iow it is a brightness has changed notification.
2) Where as on (a lot of) other laptops it means a brightness up/down key was
pressed, deal with it.
Most of the desktop environments interpret any press as in scenario 2, and
change the brightness up / down as a response to the key events, causing it
to be changed twice, once by acpi-video and once by the DE.
With the new default for video.use_native_backlight we will be moving even
more laptops over to behaving as in scenario 2. Making the remaining laptops
even more of a weird exception. Also note that it is hard to detect scenario
1 properly in userspace, and AFAIK none of the DE-s deals with it.
Therefor this commit changes the default of brightness_switch_enabled to 0
making its behavior consistent with all the other backlight drivers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make the handling of hotplug events in acpi_bus_notify() slightly
cleaner by using an extra local variable to indicate when
acpi_hotplug_schedule() should be called.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1) Eliminate most use of GAS structs, since they are not needed
for GPEs.
2) Allow raw GPE numbers > 255.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixes a problem where an extraneous error message was emitted during
initialization if there is a GPE block larger than 255 bits. Any
GPE block larger than 120 GPEs could generate the error.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With the NULL entry sanity check implemented, the XSDT validation is
useless because:
1. If XSDT contains NULL entries, it can be bypassed by the new sanity
check mechanism;
2. If RSDP contains a bad XSDT address, invoking XSDT validation will still
lead to a kernel crash.
This patch deletes the old XSDT validation solution and thus enables the
new NULL entry sanity check solution.
Note that if there are reports reporting regressions caused by the enabling
of the new feature and disabling of the old feature, this commit should be
bisected and reverted. Lv Zheng.
References: https://bugzilla.kernel.org/show_bug.cgi?id=73911
References: https://bugs.archlinux.org/task/39811
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Bruce Chiarelli <mano155@gmail.com>
Reported-and-tested-by: Spyros Stathopoulos <spystath@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that there are buggy BIOSes in the world: AMI uses an XSDT
compiler for early BIOSes, this compiler will generate XSDT with a NULL
entry. The affected BIOS versions are "AMI BIOS F2-F4".
Original solution on Linux is to use an alternative heathy root table
instead of the ill one. This commit is:
Commit: 671cc68dc6
Subject: ACPICA: Back port and refine validation of the XSDT root table.
This is an example of such XSDT dumped from B85-HD3 (AMI F3 BIOS):
[000h 0000 4] Signature : "XSDT" [Extended System Description Table]
[004h 0004 4] Table Length : 00000074
[008h 0008 1] Revision : 01
[009h 0009 1] Checksum : 18
[00Ah 0010 6] Oem ID : "ALASKA"
[010h 0016 8] Oem Table ID : "A M I"
[018h 0024 4] Oem Revision : 01072009
[01Ch 0028 4] Asl Compiler ID : "AMI "
[020h 0032 4] Asl Compiler Revision : 00010013
[024h 0036 8] ACPI Table Address 0 : 00000000BA5F8180
[02Ch 0044 8] ACPI Table Address 1 : 00000000BA5F8290
[034h 0052 8] ACPI Table Address 2 : 00000000BA5F8308
[03Ch 0060 8] ACPI Table Address 3 : 00000000BA5F8848
[044h 0068 8] ACPI Table Address 4 : 00000000BA5F9320
[04Ch 0076 8] ACPI Table Address 5 : 00000000BA5F9360
[054h 0084 8] ACPI Table Address 6 : 00000000BA5F9398
[05Ch 0092 8] ACPI Table Address 7 : 00000000BA5F9708
[064h d100 8] ACPI Table Address 8 : 00000000BA5FC9A8
[06Ch 0108 8] ACPI Table Address 9 : 0000000000000000
But according to the bug report, the XSDT in fact is not broken. In the
above XSDT, ACPI Table Address 1-8 contains the same value as RSDT. The
differences can only be seen on the following 2 entries:
1. The first entry points to a FADT whose Revision is 5 while the first
entry in RSDT points to a FADT whose Revision is 2.
The FADT dumped from the address indicated by the first entry of XSDT:
FACP @ 0x00000000BA5F8180
0000: 46 41 43 50 0C 01 00 00<05>4B 41 4C 41 53 4B 41 FACP.....KALASKA
...
The FADT dumped from the address indicated by the first entry of RSDT:
FACP @ 0x00000000BA5ED0F0
0000: 46 41 43 50 84 00 00 00<02>A7 41 4C 41 53 4B 41 FACP......ALASKA
...
2. The last entry is a NULL terminator.
According to the test result, the Revision 5 FADT is accessible. Thus the
original solution turns out to be a work around that is preventing the
higher revision tables to be used for such platforms (they are all x86-64
platforms, and should use XSDT and higher revision FADT).
This patch offers a new solution, where a sanity check is performed before
installing a table address from XSDT. If the entry is NULL, it is simply
discarded.
Note that, this patch doesn't remove the original solution, so for Linux
kernel, this commit is actually a no-op, but it allows acpidump to be
working on such platforms. By doing so, we allow another easy revertable
commit to enable this feature so that when that commit is reverted, the
useful sanity check will not be affected. Lv Zheng.
References: https://bugzilla.kernel.org/show_bug.cgi?id=73911
References: https://bugs.archlinux.org/task/39811
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Bruce Chiarelli <mano155@gmail.com>
Reported-and-tested-by: Spyros Stathopoulos <spystath@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch extends ACPI_HW_DEPENDENT_x mechanism to all error message
related functions so that the OSPMs can have full control to configure them
into stub functions.
This patch doesn't include code for Linux to use this new mechanism, thus
no functional change. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
OSPMs like Linux trend to include all header files but leave empty stub
macros for a feature that is not configured during build.
This patch cleans up global variables that are defined in utglobal.c using
ACPI_INIT_GLOBAL mechanism. In Linux, such global variables are used by
the subsystems external to ACPICA.
This patch also cleans up global variables that are defined in utglobal.c
using ACPI_GLOBAL mechanism. In Linux, such global variables are not used
or should not be used by the subsystems external to ACPICA.
External global variables can be redefined by OSPMs using
ACPI_INIT_GLOBAL/ACPI_GLOBAL macros. Thus the ACPI_GLOBAL/ACPI_INIT_GLOBAL
mechanisms can be used by OSPM to implement stubs for such external
globals.
This patch doesn't include code for Linux to use this new mechanism, thus
no functional changes. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
More of a style cleanup. If hw_build_pci_list is to return a non-zero
status, it now deletes any partial ID list that has been constructed.
If it returns AE_OK, the caller is responsible for list deletion.
David Box.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch currently only affects acpihelp and iASL which are not shipped
in the Linux kernel.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1) Add standard trace mechanism.
2) Add ACPI_EXPORT_SYMBOL macro.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move all of the public globals to acpixf.h for the convenience
of users. Also:
Adds #ifndef/#endif conditions arround ACPI_GLOBAL and
ACPI_INIT_GLOBAL definition so that OSPMs might be able to:
1. Redefine ACPI_GLOBAL/ACPI_INIT_GLOBAL into no-op, and
2. Redefine external global variables into immediates to implement stubs
for them.
Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch deploys ACPI_DEBUGGER_EXEC usage to utglobal.c to reduce "ifdef"
of ACPI_DEBUGGER. No functional changes. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch deletes global variable declarations that are no longer used by
ACPICA. No functional changes. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ThinkPad T430: extend the T430s entry to also cover the T430 (note we also
have another entry for T430's with a different DMI_PRODUCT_VERSION).
ThinkPad T430
Reported-and-tested-by: edm <fuffi.il.fuffo@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
Thinkpad T530
Reported-and-tested-by: Balint Szigeti <balint.szgt@gmail.com>
References: https://bugzilla.redhat.com/show_bug.cgi?id=1089545
Acer Aspire 5742G
Reported-and-tested-by: AnAkkk <anakin.cs@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=35622
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The commit 1e2d9cd and 7d7ee95 remove ACPI Proc Battery
directory and breaks some old userspace tools. This patch
is to revert commit 1e2d9cd.
Fixes: 1e2d9cdfb4 (ACPI / Battery: Remove battery's proc directory)
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The commit 1e2d9cd and 7d7ee95 remove ACPI Proc Battery
directory and breaks some old userspace tools. This patch
is to revert 7d7ee95.
Fixes: 7d7ee95886 (ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c)
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linux XSDT validation mechanism backport has introduced a regreession:
Commit: 671cc68dc6
Subject: ACPICA: Back port and refine validation of the XSDT root table.
There is a pointer still accessed after unmapping.
This patch fixes this issue. Lv Zheng.
Fixes: 671cc68dc6 (ACPICA: Back port and refine validation of the XSDT root table.)
References: https://bugzilla.kernel.org/show_bug.cgi?id=73911
References: https://bugs.archlinux.org/task/39811
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Bruce Chiarelli <mano155@gmail.com>
Reported-and-tested-by: Spyros Stathopoulos <spystath@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-ec:
ACPI / EC: Process rather than discard events in acpi_ec_clear
* acpi-processor:
ACPI / processor: Fix failure of loading acpi-cpufreq driver
According commit d640113fe (ACPI: processor: fix acpi_get_cpuid for UP
processor), BIOS may not provide _MAT or MADT tables and acpi_get_apicid()
always returns -1. For these cases, original code will pass apic_id with
vaule of -1 to acpi_map_cpuid() and it will check the acpi_id. If acpi_id
is equal to zero, ignores apic_id and return zero for CPU0.
Commit b981513 (ACPI / scan: bail out early if failed to parse APIC
ID for CPU) changed the behavior. Return ENODEV when find apic_id is
less than zero after calling acpi_get_apicid(). This causes acpi-cpufreq
driver fails to be loaded on some machines. This patch is to fix it.
Fixes: b981513f80 (ACPI / scan: bail out early if failed to parse APIC ID for CPU)
References: https://bugzilla.kernel.org/show_bug.cgi?id=73781
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Reported-and-tested-by: KATO Hiroshi <katoh@mikage.ne.jp>
Reported-and-tested-by: Stuart Foster <smf.linux@ntlworld.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Address a regression caused by commit ad332c8a45:
(ACPI / EC: Clear stale EC events on Samsung systems)
After the earlier patch, there was found to be a race condition on some
earlier Samsung systems (N150/N210/N220). The function acpi_ec_clear was
sometimes discarding a new EC event before its GPE was triggered by the
system. In the case of these systems, this meant that the "lid open"
event was not registered on resume if that was the cause of the wake,
leading to problems when attempting to close the lid to suspend again.
After testing on a number of Samsung systems, both those affected by the
previous EC bug and those affected by the race condition, it seemed that
the best course of action was to process rather than discard the events.
On Samsung systems which accumulate stale EC events, there does not seem
to be any adverse side-effects of running the associated _Q methods.
This patch adds an argument to the static function acpi_ec_sync_query so
that it may be used within the acpi_ec_clear loop in place of
acpi_ec_query_unlocked which was used previously.
With thanks to Stefan Biereigel for reporting the issue, and for all the
people who helped test the new patch on affected systems.
Fixes: ad332c8a45 (ACPI / EC: Clear stale EC events on Samsung systems)
References: https://lkml.kernel.org/r/532FE3B2.9060808@biereigel-wb.de
References: https://bugzilla.kernel.org/show_bug.cgi?id=44161#c173
Reported-by: Stefan Biereigel <stefan@biereigel.de>
Signed-off-by: Kieran Clancy <clancy.kieran@gmail.com>
Tested-by: Stefan Biereigel <stefan@biereigel.de>
Tested-by: Dennis Jansen <dennis.jansen@web.de>
Tested-by: Nicolas Porcel <nicolasporcel06@gmail.com>
Tested-by: Maurizio D'Addona <mauritiusdadd@gmail.com>
Tested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com>
Tested-by: Giannis Koutsou <giannis.koutsou@gmail.com>
Tested-by: Kieran Clancy <clancy.kieran@gmail.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The purpose of the acpi_pad driver is to implement the "processor power
aggregator" device as described in the ACPI 4.0 spec section 8.5. It
takes requests from the BIOS (via ACPI) to put a specified number of
CPUs into idle, in order to save power, until further notice.
It does this by creating high-priority threads that try to keep the CPUs
in a high C-state (using the monitor/mwait CPU instructions). The
mwait() call is in a loop that checks periodically if the thread should
end and a few other things.
It was discovered through testing that the power_saving threads were
causing the system to consume more power than the system was consuming
before the threads were created. A counter in the main loop of
power_saving_thread() revealed that it was spinning. The mwait()
instruction was not keeping the CPU in a high C state very much if at
all.
Here is a simplification of the loop in function power_saving_thread() in
drivers/acpi/acpi_pad.c
while (!kthread_should_stop()) {
:
try_to_freeze()
:
while (!need_resched()) {
:
if (!need_resched())
__mwait(power_saving_mwait_eax, 1);
:
if (jiffies > expire_time) {
do_sleep = 1;
break;
}
}
}
If need_resched() returns true, then mwait() is not called. It was
returning true because of things like timer interrupts, as in the
following sequence.
hrtimer_interrupt->__run_hrtimer->tick_sched_timer-> update_process_times->
rcu_check_callbacks->rcu_pending->__rcu_pending->set_need_resched
Kernels 3.5.0-rc2+ do not exhibit this problem, because a patch to
try_to_freeze() in include/linux/freezer.h introduces a call to
might_sleep(), which ultimately calls schedule() to clear the reschedule
flag and allows the the loop to execute the call to mwait().
However, the changes to try_to_freeze are unrelated to acpi_pad, and it
does not seem like a good idea to rely on an unrelated patch in a
function that could later be changed and reintroduce this bug.
Therefore, it seems better to make an explicit call to schedule() in the
outer loop when the need_resched flag is set.
Reported-and-tested-by: Stuart Hayes <stuart_hayes@dell.com>
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixed hardware does not exist on HW-reduced ACPI platforms since the
programming interface for them is not implemented on them, so no need
to scan that hardware on them.
This patch avoids creating the fixed power button ACPI device and
eliminates a probe error message from ACPI button driver on ASUS T100.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* pnp:
PNP: Work around BIOS defects in Intel MCH area reporting
* acpi-hotplug:
ACPI / notify: Do not block unknown type notifications in root handler
Commit 1a699476e2 "ACPI / hotplug / PCI: Hotplug notifications from
acpi_bus_notify()" changed the root notify handler, acpi_bus_notify(),
to block unknown type norifications, but it overlooked the fact that
they might be propagated to drivers via the ->notify() callback.
Fix the problem by allowing drivers to receive unknown type
notifications via ->notify() as before.
Fixes: 1a699476e2 (ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify())
Reported-and-tested-by: Mantas Mikulėnas <grawity@gmail.com>
Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The size of the buffer allocated for generic_serial_bus region access
is not correct. This patch introduces acpi_ex_get_serial_access_length()
to be invoked to obtain correct data buffer length.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported by: Lan Tianyu <tianyu.lan@intel.com>
Acked-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch is the generation of a commit that updates release automation
with newly added structures and files that are referenced by the acpidump.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpidump is initiated by Bob Moore and Chao Guan, fixed and completed
by Lv Zheng.
This patch is a generation of the commit that adds acpidump release
automation into ACPICA release process. Lv Zheng.
Note that this patch doesn't replace the kernel shipped acpidump with the
new acpidump. The replacement is done by further patches.
Original-by: Chao Guan <guanchao@mail.ustc.edu.cn>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
New file is tbdata.c -- management functions for ACPICA table
manager data structures.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some various cleanups and renames.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds a new API - acpi_install_table(). OSPMs can use this API
to install tables during early boot stage. Lv Zheng.
References: https://lkml.org/lkml/2014/2/28/372
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that when acpi_gbl_disable_ssdt_table_load is specified, user
still can see it installed into /sys/firmware/acpi/tables on Linux boxes.
This is because the option only stops table "loading", but doesn't stop
table "installing", thus it is still in the acpi_gbl_root_table_list. With
previous cleanups, it is possible to prevent SSDT installations to make
it not such confusing. The global variable is also renamed. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch refines ACPI_TABLE_ORIGIN_xxx flags. No functional changes.
The previous commits have introduced the following internal APIs:
1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to
ACPI_TABLE_ORIGIN_xxx flags.
2. acpi_tb_release_table: Release struct acpi_table_header according to
ACPI_TABLE_ORIGIN_xxx flags.
3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
It thus detects that the ACPI_TABLE_ORIGIN_UNKNOWN is redundant to
ACPI_TABLE_ORIGIN_OVERRIDE.
The ACPI_TABLE_ORIGIN_xxTERN_VIRTUAL flags are named as VIRTUAL in order
not to confuse with x86 logical address, this patch also renames all
"logical override" into "virtual override".
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The original table handling code does not always verify checksums before
installing a table, this is because code to achieve this must be
implemented here and there in the redundant code blocks.
There are two stages during table initialization:
1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(),
struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used
during OSPM's early boot stage.
2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is
ensured to be not NULL. This must not be used during OSPM's early boot
stage.
This patch changes acpi_tb_add_table() into an early boot safe API to reduce
code redundancies by changing the table state that is returned by this
function from "VALIDATED" to "INSTALLED". Then the table verification
code can be done in a single place. Originally, the acpi_tb_add_table() can
only be used by dynamic table loadings that are executed after early boot
stage, it cannot be used by static table loadings that are executed in
early boot stage as:
1. The address of the table is a virtual address either maintained by
OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or
"LoadTable" opcodes are executed, while during early boot stage,
physical address of the table should be used for table loading.
2. The API will ensure the state of the loaded table to be "VALIDATED"
while during early boot stage, tables maintained by root table list
should be kept as "INSTALLED".
To achieve this:
1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only
applies to DSDT/FACS installation. Rename acpi_tb_add_table() to
acpi_tb_install_non_fixed_table() as it will be applied to the installation
of the rest kinds of tables.
2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect
redudant code where their invocations actually have slight differences.
1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the
table length is known to the caller.
2. acpi_tb_install_and_override_table() is used to perform necessary
overriding before installation.
3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc
to acpi_physical_address to allow it to be invoked by static table
loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate
to the parameter change.
4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than
DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability
(logics are collected in the single function). Also delete useless code
from acpi_tb_parse_root_table().
5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and
acpi_tb_install_fixed_table() so that the table descriptor is kept in the
state of "INSTALLED" but not "VALIDATED" after returning from these
functions.
6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into
the functions to indicate a table descriptor that is not maintained by
acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and
acpi_tb_release_temporal_table() to handle the use cases of such temporal
tables. They are only used for verified installation.
7. Introduce acpi_tb_verify_table() to validate table and verify table
checksum, also remove table checksum verification from
acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions
that will convert a table into "LOADED" state or invoke it from
acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary
struct acpi_table_desc(s) that are going to be "INSTALLED".
8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc
will be overridden before installtion, this makes code simpler.
After applying the patch, tables are always installed after being
overridden and the table checksums are always verified before installation.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As acpi_tb_validate_table() returns failure on checksum verification without
doing invalidatation, all its invocations that are not done to a descriptor
stored in acpi_gbl_root_table_list are checked and balanced.
But this is not a real issue as the descritors that have been passed to
acpi_tb_add_table() are all virtual address tables and the validations are in
fact no-op. The cleanup can ensure that any future extensions made on
acpi_tb_add_table() to allow it to be invoked with physical address tables
will not trigger memory leakage regressions.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch is mainly a naming cleanup to clarify hidden logics, no
functional changes.
acpi_initialize_tables() is used by Linux to install table addresses for
early boot steps. During this stage, table addresses are mapped by
early_ioremap() mechanism which is different from the runtime IO mappings.
Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc
structure during this stage.
In order to support this in ACPICA, table states are divided into
1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and
2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL).
During acpi_initialize_tables(), table state are ensured to be "INSTALLED"
but not "VALIDATED". This logic is ensured by the original code in very
ambigious way. For example, currently acpi_tb_delete_table() is invoked in
some place to perform an uninstallation while it is invoked in other place
to perform an invalidation. They happen to work just because no one enters
the penalty where the 2 behaviours are not equivalent.
The naming cleanups are made in this patch:
A. For installation and validation:
There is code setting struct acpi_table_desc.Pointer first and delete it
immediately to keep the descriptor's state as "INSTALLED" during the
installation. This patch implements this in more direct way. After
applying it, struct acpi_table_desc.Pointer will never be set in
acpi_tb_install_table() and acpi_tb_override_table() as they are the only
functions invoked during acpi_initialize_tables(). This is achieved by:
1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this
change.
2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing
consistencies as other APIs (verb. Table).
3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and
acpi_tb_table_override().
4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not
maintained in the struct acpi_table_desc of the global root table list and
rewrite acpi_tb_validate_table() using this new function to reduce
redundancies.
5. Replace the table pointer using the overridden table pointer in
acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot
stage, tables returned from this functions should be "VALIDATED". As
acpi_tb_override_table() is modified by this patch to return a "INSTALLED"
but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged,
struct acpi_table_desc.Pointer is filled in acpi_tb_add_table().
B. For invalidation and uninstallation:
The original code invalidate table by invoking acpi_tb_delete_table() here
and there, but actually this function should only be used to uninstall
tables. This can work just because its invocations are equivalent to
invalidation in some cases.
This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and
acpi_tb_uninstall_table() and cleans up the hidden logic using the new
APIs. This is achieved by:
1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly
called before resetting struct acpi_table_desc.Address. Thus the table
descriptor is in "not INSTALLED" state. This patch enforces this by
setting struct acpi_table_desc.Address to NULL in this function.
2. Introduce acpi_tb_invalidate_table() to be the reversal of
acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table().
3. Introduce acpi_tb_release_table() to release the table pointer that is not
maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table()
using this new function to reduce redundancies.
After cleaning up, the maintainability of the internal APIs are also
improved:
1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to
ACPI_TABLE_ORIGIN_xxx flags.
2. acpi_tb_release_table: Release struct acpi_table_header according to
ACPI_TABLE_ORIGIN_xxx flags.
3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and
struct acpi_table_desc.Flags. It only happens in
"INSTALLED" state.
The patch has been unit tested in acpi_exec by:
1. Initializing;
2. Executing exc_tbl ASLTS tests;
3. Executing "Load" command.
So that all original acpi_tb_install_table() and acpi_tb_override_table()
invocations are covered.
Known Issues:
1. Cleanup acpi_tb_add_table() to Kill Code Redundancies
Current implementation in acpi_tb_add_table() is not very clean, further
patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(),
acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this
patch so that it is easy for the reviewers to understand the changes in
this patch.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently there are following issues in acpi_tb_add_table():
Following logic is currently correct:
1. When a table is allocated in acpi_ex_load_op(), if a reloading happens,
the allocated memory is freed by acpi_tb_add_table() and AE_OK is
returned to the caller to avoid the caller to free it again.
Following logic is currently incorrect:
1. When a table is allocated in acpi_ex_load_op() or by the
acpi_load_table() caller, if the table is already loaded, there will be
twice ACPI_FREE() called for the same pointer when acpi_tb_add_table()
returns AE_ALREADY_EXISTS.
This patch only fixes the above incorrect logic in acpi_tb_add_table():
1. Only invoke acpi_tb_delete_table() if AE_OK is going to be returned.
2. After doing so, we do not invoke ACPI_FREE() when returning AE_OK;
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When table is overridden or reloaded, acpi_tb_delete_table() is called where
struct acpi_table_desc.Pointer will be NULL. It thus is impossible for virtual
addressed tables to obtain the .Pointer again in acpi_tb_verify_table().
This patch stores virtual table addresses (ACPI_TABLE_ORIGIN_ALLOCATED,
ACPI_TABLE_ORIGIN_UNKNOWN, ACPI_TABLE_ORIGIN_OVERRIDE) in the
struct acpi_table_desc.Address field and refills the struct acpi_table_desc.Pointer
using these addresses in acpi_tb_verify_table(). Note that if a table with
ACPI_TABLE_ORIGIN_ALLOCATED set is actually freed, the .Address field
should be invalidated and thus must be replaced with NULL to avoid wrong
future validations occuring in acpi_tb_verify_table().
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The divergences in the ACPICA files makes it difficult to maintain linuxize
ACPICA table commits. This patch reduces such divergences before applying
table manager commits so that human interventions of patch rebasing can be
reduced.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Adds "OriginalSyncLevel" field to the output.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch cleans up all of the acpi_os_wait_events_complete() invocations to
make it to be invoked inside of ACPICA in the way to accommodate Linux's
work queue implementation.
According to the report, current Linux kernel code is facing a boot time
race issue in the acpi_remove_notify_handler(). This is because:
Linux is using work queues to implement a deferred handler call environment
while ACPICA expects OSPM to implement acpi_os_wait_events_complete() using
wait queues. The position to invoke a "waiter" is not suitable for a
"flusher" as new invocations can be scheduled after this position and
before the deletion of the handler from its management container.
Since the following commit has deleted acpi_os_wait_events_complete()
parameters, it thus might not be possible for OSPM to achieve a safe
removal using wait queues. This requires ACPICA to be changed accordingly
to "flush" handlers rather than "wait" them to be drain up:
Commit: 5ff986a2a9db11858247b71fe242fe17617229aa
Date: Wed, 16 May 2012 13:36:07 -0700
Subject: Introduce acpi_os_wait_events_complete interface.
This interface will block until asynchronous events like notifies
and GPEs are complete. Within ACPICA, it is called before a notify or GPE
handler is removed. ACPICA BZ 868.
This patch fixes this issue by invoking acpi_os_wait_events_complete() in the
way to "flush" things - it thus should be put to the position after handler
is removed from its management container but before it is destructed.
The technical concerns are:
1. MTX_NAMESPACE is used to protect things that acpi_os_wait_events_complete()
might be waiting for, thus MTX_NAMESPACE must be unlocked before
invoking acpi_os_wait_events_complete().
2. MTX_NAMESPACE is also used to implement the serialization of
acpi_install_notify_handler() and acpi_remove_notify_handler(). This patch
changes this logic, thus if there are many
acpi_install/remove_notify_handler() invoked in parallel, the
acpi_os_wait_events_complete() might face the races which could cause it
never running to an end. Normally this will require additional code to
implement a separate locking facility which is not implemented due to 3.
3. Given ACPICA users will always invoke acpi_install_notify_handler() once
during Linux module/device initialization and invoke
acpi_remove_notify_handler() once during module/device finalization,
problem stated in 2 will not happen in Linux environment due to the
mutual exclusive module/device existence, this fix thus is sufficient.
Same concerns can apply to acpi_install/remove_gpe_handler(). Reported and
tested: Ronald Vink. Fixed: Lv Zheng.
References: https://bugzilla.kernel.org/show_bug.cgi?id=60583
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-Tested-by: Ronald Vink <ronald.vink@boskalis.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For Notify operators, displays a comment that describe the meaning
of the notify value.
This patch updates the debugging information that is enabled for
CONFIG_ACPI_DEBUG builds.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For _HID and _CID, the disassembler will emit a string that describes
the device if the _HID/_CID value is recognized. acpihelp updated also.
acpihelp will now search for a specific ID as well as displaying
the list of "known" (to ACPICA) IDs.
This patch does not affect Linux kernel behavior as the disassembler
and the acpihelp are not shipped with it.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We would like to see the ASL for any machine that uses this operator,
so emit at least a warning to hopefully draw some attention.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Change all comments that contain the string "ACPI CA" to "ACPICA"
so that the name is standard across the entire source base.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
These recently added interfaces did not have these macros, used
by some hosts.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The UEFI Forum included the ACPI spec in its portfolio in October 2013
and will host future spec iterations, following the ACPI v5.0a release.
A UEFI Forum working group named ACPI Specification Working Group (ASWG)
has been established to handle future ACPI developments, any UEFI member
can join the group and contribute to ACPI specification.
So update the ownership and developers for ACPI in Kconfig accordingly,
and add another website link to ACPI specification too.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are no references to the dock_device_ids[] table anywhere in
the code and it is not even useful for module autoloading, because
the dock driver can only be built in, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Like many other Windows 8 laptops the ThinkPad Helix's backlight has a
broken ACPI interface and can only be properly adjusted by using the
video card's native backlight control. This adds the ThinkPad Helix to
the list of laptops affected with this issue so that
video.use_native_backlight is enabled by default.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A debug statement in acpi_thermal_trips_update() uses a wrong trip
point (tz->trips.critical instead of tz->trips.hot) to get the
temperature value from. Fix that.
Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use acpi_os_allocate_zeroed instead of acpi_os_allocate + memset.
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Remaining changes from upstream ACPICA release 20140214 that introduce
code to automatically serialize the execution of methods creating any
named objects which really cannot be executed in parallel with each
other anyway (previously ACPICA attempted to address that by aborting
methods upon conflict detection, but that wasn't reliable enough and
led to other issues). From Bob Moore and Lv Zheng.
- intel_pstate fix to use del_timer_sync() instead of del_timer() in
the exit path before freeing the timer structure from Dirk Brandewie
(original patch from Thomas Gleixner).
- cpufreq fix related to system resume from Viresh Kumar.
- Serialization of frequency transitions in cpufreq that involve
PRECHANGE and POSTCHANGE notifications to avoid ordering issues
resulting from race conditions. From Srivatsa S Bhat and Viresh Kumar.
- Revert of an ACPI processor driver change that was based on a specific
interpretation of the ACPI spec which may not be correct (the relevant
part of the spec appears to be incomplete). From Hanjun Guo.
- Runtime PM core cleanups and documentation updates from Geert Uytterhoeven.
- PNP core cleanup from Michael Opdenacker.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=EfZ8
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
"These are commits that were not quite ready when I sent the original
pull request for 3.15-rc1 several days ago, but they have spent some
time in linux-next since then and appear to be good to go. All of
them are fixes and cleanups.
Specifics:
- Remaining changes from upstream ACPICA release 20140214 that
introduce code to automatically serialize the execution of methods
creating any named objects which really cannot be executed in
parallel with each other anyway (previously ACPICA attempted to
address that by aborting methods upon conflict detection, but that
wasn't reliable enough and led to other issues). From Bob Moore
and Lv Zheng.
- intel_pstate fix to use del_timer_sync() instead of del_timer() in
the exit path before freeing the timer structure from Dirk
Brandewie (original patch from Thomas Gleixner).
- cpufreq fix related to system resume from Viresh Kumar.
- Serialization of frequency transitions in cpufreq that involve
PRECHANGE and POSTCHANGE notifications to avoid ordering issues
resulting from race conditions. From Srivatsa S Bhat and Viresh
Kumar.
- Revert of an ACPI processor driver change that was based on a
specific interpretation of the ACPI spec which may not be correct
(the relevant part of the spec appears to be incomplete). From
Hanjun Guo.
- Runtime PM core cleanups and documentation updates from Geert
Uytterhoeven.
- PNP core cleanup from Michael Opdenacker"
* tag 'pm+acpi-3.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Make cpufreq_notify_transition & cpufreq_notify_post_transition static
cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end}
cpufreq: Make sure frequency transitions are serialized
intel_pstate: Use del_timer_sync in intel_pstate_cpu_stop
cpufreq: resume drivers before enabling governors
PM / Runtime: Spelling s/competing/completing/
PM / Runtime: s/foo_process_requests/foo_process_next_request/
PM / Runtime: GENERIC_SUBSYS_PM_OPS is gone
PM / Runtime: Correct documented return values for generic PM callbacks
PM / Runtime: Split line longer than 80 characters
PM / Runtime: dev_pm_info.runtime_error is signed
Revert "ACPI / processor: Make it possible to get APIC ID via GIC"
ACPICA: Enable auto-serialization as a default kernel behavior.
ACPICA: Ignore sync_level for methods that have been auto-serialized.
ACPICA: Add additional named objects for the auto-serialize method scan.
ACPICA: Add auto-serialization support for ill-behaved control methods.
ACPICA: Remove global option to serialize all control methods.
PNP: remove deprecated IRQF_DISABLED
Enumeration
- Increment max correctly in pci_scan_bridge() (Andreas Noever)
- Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
- Assign CardBus bus number only during the second pass (Andreas Noever)
- Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
- Make sure bus number resources stay within their parents bounds (Andreas Noever)
- Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
- Check for child busses which use more bus numbers than allocated (Andreas Noever)
- Don't scan random busses in pci_scan_bridge() (Andreas Noever)
- x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
- x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
- x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
- x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
- x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)
NUMA
- x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
- x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
- x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
- x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
- x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
- ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
- ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
- ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)
Resource management
- i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
- Add resource_contains() (Bjorn Helgaas)
- Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
- Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
- Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
- Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
- Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
- Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
- Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
- Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
- alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
- s390: Use generic pci_enable_resources() (Bjorn Helgaas)
- Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
- Set type in __request_region() (Bjorn Helgaas)
- Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
- Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
- Log IDE resource quirk in dmesg (Bjorn Helgaas)
- Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)
PCI device hotplug
- Make check_link_active() non-static (Rajat Jain)
- Use link change notifications for hot-plug and removal (Rajat Jain)
- Enable link state change notifications (Rajat Jain)
- Don't disable the link permanently during removal (Rajat Jain)
- Don't check adapter or latch status while disabling (Rajat Jain)
- Disable link notification across slot reset (Rajat Jain)
- Ensure very fast hotplug events are also processed (Rajat Jain)
- Add hotplug_lock to serialize hotplug events (Rajat Jain)
- Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
- Don't turn slot off when hot-added device already exists (Yijing Wang)
MSI
- Keep pci_enable_msi() documentation (Alexander Gordeev)
- ahci: Fix broken single MSI fallback (Alexander Gordeev)
- ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
- Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
- Fix leak of msi_attrs (Greg Kroah-Hartman)
- Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)
Virtualization
- Device-specific ACS support (Alex Williamson)
Freescale i.MX6
- Wait for retraining (Marek Vasut)
Marvell MVEBU
- Use Device ID and revision from underlying endpoint (Andrew Lunn)
- Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
- Call request_resource() on the apertures (Jason Gunthorpe)
- Fix potential issue in range parsing (Jean-Jacques Hiblot)
Renesas R-Car
- Check platform_get_irq() return code (Ben Dooks)
- Add error interrupt handling (Ben Dooks)
- Fix bridge logic configuration accesses (Ben Dooks)
- Register each instance independently (Magnus Damm)
- Break out window size handling (Magnus Damm)
- Make the Kconfig dependencies more generic (Magnus Damm)
Synopsys DesignWare
- Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)
Miscellaneous
- Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
- Enable INTx if BIOS left them disabled (Bjorn Helgaas)
- Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
- Clean up par-arch object file list (Liviu Dudau)
- Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
- ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
- Fix pci_bus_b() build failure (Paul Gortmaker)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=3mNS
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI changes from Bjorn Helgaas:
"Enumeration
- Increment max correctly in pci_scan_bridge() (Andreas Noever)
- Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
- Assign CardBus bus number only during the second pass (Andreas Noever)
- Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
- Make sure bus number resources stay within their parents bounds (Andreas Noever)
- Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
- Check for child busses which use more bus numbers than allocated (Andreas Noever)
- Don't scan random busses in pci_scan_bridge() (Andreas Noever)
- x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
- x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
- x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
- x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
- x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)
NUMA
- x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
- x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
- x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
- x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
- x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
- ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
- ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
- ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)
Resource management
- i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
- Add resource_contains() (Bjorn Helgaas)
- Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
- Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
- Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
- Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
- Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
- Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
- Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
- Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
- alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
- s390: Use generic pci_enable_resources() (Bjorn Helgaas)
- Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
- Set type in __request_region() (Bjorn Helgaas)
- Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
- Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
- Log IDE resource quirk in dmesg (Bjorn Helgaas)
- Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)
PCI device hotplug
- Make check_link_active() non-static (Rajat Jain)
- Use link change notifications for hot-plug and removal (Rajat Jain)
- Enable link state change notifications (Rajat Jain)
- Don't disable the link permanently during removal (Rajat Jain)
- Don't check adapter or latch status while disabling (Rajat Jain)
- Disable link notification across slot reset (Rajat Jain)
- Ensure very fast hotplug events are also processed (Rajat Jain)
- Add hotplug_lock to serialize hotplug events (Rajat Jain)
- Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
- Don't turn slot off when hot-added device already exists (Yijing Wang)
MSI
- Keep pci_enable_msi() documentation (Alexander Gordeev)
- ahci: Fix broken single MSI fallback (Alexander Gordeev)
- ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
- Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
- Fix leak of msi_attrs (Greg Kroah-Hartman)
- Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)
Virtualization
- Device-specific ACS support (Alex Williamson)
Freescale i.MX6
- Wait for retraining (Marek Vasut)
Marvell MVEBU
- Use Device ID and revision from underlying endpoint (Andrew Lunn)
- Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
- Call request_resource() on the apertures (Jason Gunthorpe)
- Fix potential issue in range parsing (Jean-Jacques Hiblot)
Renesas R-Car
- Check platform_get_irq() return code (Ben Dooks)
- Add error interrupt handling (Ben Dooks)
- Fix bridge logic configuration accesses (Ben Dooks)
- Register each instance independently (Magnus Damm)
- Break out window size handling (Magnus Damm)
- Make the Kconfig dependencies more generic (Magnus Damm)
Synopsys DesignWare
- Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)
Miscellaneous
- Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
- Enable INTx if BIOS left them disabled (Bjorn Helgaas)
- Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
- Clean up par-arch object file list (Liviu Dudau)
- Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
- ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
- Fix pci_bus_b() build failure (Paul Gortmaker)"
* tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits)
Revert "[PATCH] Insert GART region into resource map"
PCI: Log IDE resource quirk in dmesg
PCI: Change pci_bus_alloc_resource() type_mask to unsigned long
PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region()
resources: Set type in __request_region()
PCI: Don't check resource_size() in pci_bus_alloc_resource()
s390/PCI: Use generic pci_enable_resources()
tile PCI RC: Use default pcibios_enable_device()
sparc/PCI: Use default pcibios_enable_device() (Leon only)
sh/PCI: Use default pcibios_enable_device()
microblaze/PCI: Use default pcibios_enable_device()
alpha/PCI: Use default pcibios_enable_device()
PCI: Add "weak" generic pcibios_enable_device() implementation
PCI: Don't enable decoding if BAR hasn't been assigned an address
PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled
PCI: Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit
PCI: Don't try to claim IORESOURCE_UNSET resources
PCI: Check IORESOURCE_UNSET before updating BAR
PCI: Don't clear IORESOURCE_UNSET when updating BAR
PCI: Mark resources as IORESOURCE_UNSET if we can't assign them
...
Conflicts:
arch/x86/include/asm/topology.h
drivers/ata/ahci.c
* acpica:
ACPICA: Enable auto-serialization as a default kernel behavior.
ACPICA: Ignore sync_level for methods that have been auto-serialized.
ACPICA: Add additional named objects for the auto-serialize method scan.
ACPICA: Add auto-serialization support for ill-behaved control methods.
ACPICA: Remove global option to serialize all control methods.
Revert commit df86f5df79 (ACPI / processor: Make it possible to get
APIC ID via GIC).
APIC ID refers the hardware ID of the CPU, which means MPIDR on
ARM/ARM64, but in ACPI 5.0, GIC ID feild in GIC structure have
no explicit definition and may not refer to the MPIDR.
Commit df86f5df79 assumed that gic->gic_id as MPIDR which may not be
the case, so revert it until the explicit definition of GIC structure
is ready.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The previous commit "ACPICA: Add auto-serialization support for ill-behaved
control methods" introduced the auto-serialization facility as a workaround
that can be enabled by "acpi_auto_serialize":
This feature marks control methods that create named objects as "serialized"
to avoid unwanted AE_ALREADY_EXISTS control method evaluation failures.
Enable method auto-serialization as the default kernel behavior. The new kernel
parameter is also changed from "acpi_auto_serialize" to "acpi_no_auto_serialize"
to reflect the default behavior.
References: https://bugzilla.kernel.org/show_bug.cgi?id=52191
References: http://www.spinics.net/lists/linux-acpi/msg49496.html
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cannot use a sync_level for methods that have been serialized at load-time
or runtime because this may interfere with any existing use of sync_levels
within the ASL code. So, we simply ignore the sync_level for these methods,
thus preserving any existing sync_level priorities. Note, the use of
sync_levels is actually rather rare within BIOS ASL code.
References: http://www.spinics.net/lists/linux-acpi/msg49496.html
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Reported-by: Sabrina Dubroka <sd@queasysnail.net>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change adds some additional opcodes that are detected and will
cause a method to be auto-serialized. These opcodes are the various
CreateXField and the FieldUnit opcodes. Lv Zheng.
References: https://bugzilla.kernel.org/show_bug.cgi?id=52191
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change adds support to automatically mark a control method as
"serialized" if the method creates any named objects. This will
positively prevent the method from being entered by more than one
thread and thus preventing a possible abort when an attempt is
made to create an object twice.
Implemented by parsing all non-serialize control methods at table
load time.
This feature is disabled by default and this patch also adds a new
Linux kernel parameter "acpi_auto_serialize" to allow this feature
to be turned on for a specific boot.
References: https://bugzilla.kernel.org/show_bug.cgi?id=52191
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to the reports, the "acpi_serialize" mechanism is broken as:
A. The parallel method calls can still happen when the interpreter lock is
released under the following conditions:
1. External callbacks are invoked, for example, by the region handlers,
the exception handlers, etc.;
2. Module level execution is performed when Load/LoadTable opcodes are
executed, and
3. The _REG control methods are invoked to complete the region
registrations.
B. For the following situations, the interpreter lock need to be released
even for a serialized method while currently, the lock-releasing
operation is marked as a no-op by
acpi_ex_relinquish/reacquire_interpreter() when this mechanism is
enabled:
1. Wait opcode is executed,
2. Acquire opcode is executed, and
3. Sleep opcode is executed.
This patch removes this mechanism and the internal
acpi_ex_relinquish/reacquire_interpreter() APIs. Lv Zheng.
References: https://bugzilla.kernel.org/show_bug.cgi?id=52191
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-processor:
ACPI: Move BAD_MADT_ENTRY() to linux/acpi.h
ACPI / processor: Make it possible to get APIC ID via GIC
ACPI / processor: Build idle_boot_override on x86 and ia64
ACPI / processor: Use ACPI_PROCESSOR_DEVICE_HID instead of "ACPI0007"
ACPI / processor: Fix acpi_processor_eval_pdc() return value type
ACPI_VIDEO stopped depending on VIDEO_OUTPUT_CONTROL over 3 years ago
(see commit 677bd810, "ACPI video: remove output switching control".)
So it's about time to remove the Kconfig dependency between these two
options.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 1696d9d (ACPI: Remove the old /proc/acpi/event interface)
removed ACPI Button event which originally was sent to userspace via
/proc/acpi/event. This caused ACPI shutdown regression on gentoo
in VirtualBox. Now ACPI events are sent to userspace via netlink,
so add ACPI Button event back via netlink routine.
References: https://bugzilla.kernel.org/show_bug.cgi?id=71721
Reported-and-tested-by: Richard Musil <richard.musil@gmail.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We already have a macro for PREFIX of "ACPI: " in
drivers/acpi/internal.h, so remove the duplicate ones
in ACPI drivers when internal.h is included.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On HP Pavilion dv6-6179er there are no notifications when AC adapter
is plugged/unplugged.
However, when AC status is read (acpi_ac_get_state), and if AC status
has changed, AML code triggers the notification.
This patch solves the problem by re-reading AC adapter status upon
ACPI_BATTERY_NOTIFY_STATUS notification.
Signed-off-by: Alexander Mezin <mezin.alexander@gmail.com>
Acked-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Allow other drivers to subscribe to battery status notifications.
Just like AC driver does.
Signed-off-by: Alexander Mezin <mezin.alexander@gmail.com>
Acked-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI_BATTERY_CLASS is used in multiple places.
Also, I'll use ACPI_BATTERY_NOTIFY_STATUS inside AC driver in
one of following patches.
So, create a header file and move ACPI_BATTERY_CLASS and
ACPI_BATTERY_NOTIFY_* definitions into it.
Also, remove copy of ACPI_BATTERY_CLASS from sbs.c
Signed-off-by: Alexander Mezin <mezin.alexander@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit aae576e5faefa8ba70647efa320d4747b6375f1e.
Push and Pop are not portable "enough", and caused problems for
some ACPICA customers.
Signed-off-by: Robert Moore <Robert.Moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change hardens the ACPICA code to detect circular linked object
lists and prevent an infinite loop if such corruption exists.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change adds support for two missing objects, the "extra" and
"data" secondary objects, as well as adding support to traverse and
display linked lists related to ACPICA objects.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Adds further information about why new _OSI strings should be
adopted by all hosts as soon as possible.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Allow objects of type "reference" in the second subpackage element.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change cleans up the entire global variable mechaninism including
the related macros. Also reduces warnings from the "sparse" utility
in the Linux environment. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Change all instances of "sub-package" to "subpackage" for consistency.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-ost:
ACPI: Drop acpi_evaluate_hotplug_ost() and ACPI_HOTPLUG_OST
ACPI: use device name LNXSYBUS.xx for ACPI \_SB and \_TZ objects
ACPI / processor: use acpi_evaluate_ost() to replace open-coded version
ACPI / PAD / xen: use acpi_evaluate_ost() to replace open-coded version
ACPI / PAD: use acpi_evaluate_ost() to replace open-coded version
ACPI: rename acpi_evaluate_hotplug_ost() to acpi_evaluate_ost()
* acpi-hotplug:
ACPI / hotplug: Rework deferred execution of acpi_device_hotplug()
ACPI / dock: Update copyright notice
ACPI / dock: Drop remove_dock_dependent_devices()
ACPI / dock: Drop struct acpi_dock_ops and all code related to it
ACPI / ATA: Add hotplug contexts to ACPI companions of SATA devices
ACPI / dock: Add .uevent() callback to struct acpi_hotplug_context
ACPI / dock: Use callback pointers from devices' ACPI hotplug contexts
ACPI / dock: Use ACPI device object pointers instead of ACPI handles
ACPI / hotplug: Add .fixup() callback to struct acpi_hotplug_context
ACPI / hotplug / PCI: Do not clear event callback pointer for docks
ACPI / dock: Associate dock platform devices with ACPI device objects
ACPI / dock: Pass ACPI device pointer to acpi_device_is_battery()
ACPI / dock: Dispatch dock notifications from the global notify handler
If the HW Reduced ACPI mode bit is set in the FADT, ACPICA uses
the optional sleep control and sleep status registers for making
the system enter sleep states (including S5), so it is not possible
to use system sleep states or power it off using ACPI if the HW
Reduced ACPI mode bit is set and those registers are not available.
For this reason, add a new function, acpi_sleep_state_supported(),
checking if the HW Reduced ACPI mode bit is set and whether or not
system sleep states are usable in that case in addition to checking
the return value of acpi_get_sleep_type_data() and make the ACPI
sleep setup routines use that function to check the availability of
system sleep states.
Among other things, this prevents the kernel from attempting to
use ACPI for powering off HW Reduced ACPI systems without the sleep
control and sleep status registers, because ACPI power off doesn't
have a chance to work on them. That allows alternative power off
mechanisms that may actually work to be used on those systems. The
affected machines include Dell Venue 8 Pro, Asus T100TA, Haswell
Desktop SDP and Ivy Bridge EP Demo depot.
References: https://bugzilla.kernel.org/show_bug.cgi?id=70931
Reported-by: Adam Williamson <awilliam@redhat.com>
Tested-by: Aubrey Li <aubrey.li@linux.intel.com>
Cc: 3.4+ <stable@vger.kernel.org> # 3.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit 3130497f5b ("ACPI / sleep: pm_power_off needs more
sanity checks to be installed") that breaks power ACPI power off on a
lot of systems, because it checks wrong registers.
Fixes: 3130497f5b ("ACPI / sleep: pm_power_off needs more sanity checks to be installed")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A number of Samsung notebooks (530Uxx/535Uxx/540Uxx/550Pxx/900Xxx/etc)
continue to log events during sleep (lid open/close, AC plug/unplug,
battery level change), which accumulate in the EC until a buffer fills.
After the buffer is full (tests suggest it holds 8 events), GPEs stop
being triggered for new events. This state persists on wake or even on
power cycle, and prevents new events from being registered until the EC
is manually polled.
This is the root cause of a number of bugs, including AC not being
detected properly, lid close not triggering suspend, and low ambient
light not triggering the keyboard backlight. The bug also seemed to be
responsible for performance issues on at least one user's machine.
Juan Manuel Cabo found the cause of bug and the workaround of polling
the EC manually on wake.
The loop which clears the stale events is based on an earlier patch by
Lan Tianyu (see referenced attachment).
This patch:
- Adds a function acpi_ec_clear() which polls the EC for stale _Q
events at most ACPI_EC_CLEAR_MAX (currently 100) times. A warning is
logged if this limit is reached.
- Adds a flag EC_FLAGS_CLEAR_ON_RESUME which is set to 1 if the DMI
system vendor is Samsung. This check could be replaced by several
more specific DMI vendor/product pairs, but it's likely that the bug
affects more Samsung products than just the five series mentioned
above. Further, it should not be harmful to run acpi_ec_clear() on
systems without the bug; it will return immediately after finding no
data waiting.
- Runs acpi_ec_clear() on initialisation (boot), from acpi_ec_add()
- Runs acpi_ec_clear() on wake, from acpi_ec_unblock_transactions()
References: https://bugzilla.kernel.org/show_bug.cgi?id=44161
References: https://bugzilla.kernel.org/show_bug.cgi?id=45461
References: https://bugzilla.kernel.org/show_bug.cgi?id=57271
References: https://bugzilla.kernel.org/attachment.cgi?id=126801
Suggested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com>
Signed-off-by: Kieran Clancy <clancy.kieran@gmail.com>
Reviewed-by: Lan Tianyu <tianyu.lan@intel.com>
Reviewed-by: Dennis Jansen <dennis.jansen@web.de>
Tested-by: Kieran Clancy <clancy.kieran@gmail.com>
Tested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com>
Tested-by: Dennis Jansen <dennis.jansen@web.de>
Tested-by: Maurizio D'Addona <mauritiusdadd@gmail.com>
Tested-by: San Zamoyski <san@plusnet.pl>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On resume we do not need to wait for acpi_thermal_check to finish.
Instead, we can run it asynchronously and not block the whole system
resume. Also, we make sure when we are suspending again, previously
queued work for acpi_thermal_check is done.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the only function executed by acpi_hotplug_execute() is
acpi_device_hotplug() and it only is called by the ACPI core,
simplify its definition so that it only takes two arguments, the
ACPI device object pointer and event code, rename it to
acpi_hotplug_schedule() and move its header from acpi_bus.h to
the ACPI core's internal header file internal.h. Modify the
definition of acpi_device_hotplug() so that its first argument is
an ACPI device object pointer and modify the definition of
struct acpi_hp_work accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Runtime-suspended devices are resumed during system suspend by
acpi_subsys_prepare() for two reasons: First, because they may need
to be reprogrammed in order to change their wakeup settings and,
second, because they may need to be operatonal for their children
to be successfully suspended. That is a problem, though, if there
are many runtime-suspended devices that need to be resumed this
way during system suspend, because the .prepare() PM callbacks of
devices are executed sequentially and the times taken by them
accumulate, which may increase the total system suspend time quite
a bit.
For this reason, move the resume of runtime-suspended devices up
to the next phase of device suspend (during system suspend), except
for the ones that have power.ignore_children set. The exception is
made, because the devices with power.ignore_children set may still
be necessary for their children to be successfully suspended (during
system suspend) and they won't be resumed automatically as a result
of the runtime resume of their children.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Sleep control and status registers need santity checks as well before
ACPI installs acpi_power_off to pm_power_off hook. The checking code in
acpi_enter_sleep_state() is too late, we should not allow a not-working
pm_power_off function to be hooked up.
Signed-off-by: Aubrey Li <aubrey.li@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch just does some cleanup to replace printk with pr_*,
and introduces pr_fmt() to remove all PREFIXs in tables.c,
no functional change.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI table may export resource entry with 0 length.
But the current code interprets this kind of resource in a wrong way.
It will create a resource structure with
res->end = acpi_resource->start + acpi_resource->len - 1;
This patch fixes a problem on my machine that a platform device fails
to be created because one of its ACPI IO resource entry (start = 0,
end = 0, length = 0) is translated into a generic resource with
start = 0, end = 0xffffffff.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Always examine all subpackages for reversed entries.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change prevents a fault during the repair by checking up
front if the _PRT subpackage contains the minimum number of
elements (4).
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The original code was lost accidently, it was not generated along with the
following commit of mechanism improvements and thus not get merged:
Commit: d5a36100f6
Subject: ACPICA: Add mechanism for early object repairs on a per-name basis
Adds the framework to allow object repairs very early in the
return object analysis. Enables repairs like string->unicode,
etc.
This patch restores the implementation of the NULL element repair code for
ACPI_RTYPE_NONE. In the original design, ACPI_RTYPE_NONE is defined to
collect simple NULL object repairs.
Lv Zheng.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=67901
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change enables proper handling of NULL package entries in a _PRT
return value, during construction of the PCI routing table.
Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Corrects ACPI_DISASSEMBLER to the compile conditions. The wrong
condition was introduced by this commit:
Commit: 3334861b1e
Subject: ACPICA: Update the conditions to enable the utility resource dump strings.
This was detected in the ACPICA upstream. Linux is not affected by the
wrong commit as the disassembler is not shipped in the Linux.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is not an official predefined name yet, but we add it to assist
with development.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use push and pop to both guarantee that the correct alignment is used,
and to restore the alignment to whatever it was before the header
was included.
It is reported that the #pragma pack(push/pop) directives are not supported
by the specific GCCs, but this patch still doesn't affect kernel build
as there are already #pragma pack([1]) directives used in the old ACPICA
headers, which means there shouldn't be GCCs that are currently used to
compile the ACPI kernels do not support #pragma pack() directives.
References: https://bugs.acpica.org/show_bug.cgi?id=1058
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_processor_set_throttling() uses set_cpus_allowed_ptr() to make
sure that the (struct acpi_processor)->acpi_processor_set_throttling()
callback will run on the right CPU. However, the function may be
called from a worker thread already bound to a different CPU in which
case that won't work.
Make acpi_processor_set_throttling() use work_on_cpu() as appropriate
instead of abusing set_cpus_allowed_ptr().
Reported-and-tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Cc: All applicable <stable@vger.kernel.org>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace acpi_evaluate_hotplug_ost() with acpi_evaluate_ost()
everywhere and drop the ACPI_HOTPLUG_OST symbol so that hotplug
_OST is supported unconditionally.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Update the copyright notice of the ACPI dock driver to reflect the
fact that substantial changes have been made to it recently.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since remove_dock_dependent_devices() is only called from acpi_dock_add()
and it only is called if the add_dock_dependent_device() adding the
dock station to its own list of dependent devices has failed, it is not
really necessary, because the dock station's list of dependent devices
is guaranteed to be empty at that point. Drop it, then.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since struct acpi_dock_ops and the code handling it don't have any
users any more after the previous changes, drop that structure and
the code related to it altogether.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify the SATA subsystem to add hotplug contexts to ACPI companions
of SATA devices and ports instead of registering special ACPI dock
operations using register_hotplug_dock_device().
That change will allow the entire code handling those special ACPI
dock operations to be dropped in the next commit.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
* acpi-pm:
ACPI / thermal: fix thermal driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / SBS: fix SBS driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / fan: fix fan driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / button: fix button driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / battery: fix battery driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / AC: fix AC driver compile error when CONFIG_PM_SLEEP is undefined
* acpi-video:
Revert "ACPI: Blacklist Win8 OSI for some HP laptop 2013 models"
ACPI / video: Add systems that should favour native backlight interface
ACPI / video: Filter the _BCL table for duplicate brightness values
In order to avoid the need to register special ACPI dock
operations for SATA devices add a .uevent() callback pointer to
struct acpi_hotplug_context and make dock_hotplug_event() use that
callback if available. Also rename the existing .event() callback
in struct acpi_hotplug_context to .notify() to avoid possible
confusion in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of requiring a set of special dock operations to be registered
via register_hotplug_dock_device() for each ACPI dock device, it is
much more straightforward to use callback pointers from the devices'
hotplug contexts if available.
For this reason, modify dock_hotplug_event() to use callback pointers
from the hotplug contexts of ACPI devices and fall back to using the
special dock operarions only if those callbacks are missing. Also
make the ACPI-based PCI hotplug (ACPIPHP) subsystem set the .fixup
callback pointer in the hotplug contexts of devices handled by it to
a new function, acpiphp_post_dock_fixup(), so that the dock station
driver can use the callbacks from those contexts instead of special
dock operations registered via register_hotplug_dock_device().
Along with the above changes drop the ACPIPHP's dock operations that
are not necessary any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rework the ACPI dock station driver to store ACPI device object
pointers instead of ACPI handles in its internal data structures.
The purpose is moslty to make subsequent simplifications possible,
but also this allows the overall code size to be reduced slightly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use device name "LNXSYBUS:xx" instead of "device.xx" for ACPI objects
\_SB and \_TZ.
BTW, the original check of "handle == ACPI_ROOT_OBJECT" in statment
"else if (list_empty(&pnp->ids) && handle == ACPI_ROOT_OBJECT)"
is always false because of the code at the begin of that block.
if (handle == ACPI_ROOT_OBJECT) {
acpi_add_id(pnp, ACPI_SYSTEM_HID);
break;
}
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use public function acpi_evaluate_ost() to replace open-coded
version of evaluating ACPI _OST method.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use public function acpi_evaluate_ost() to replace open-coded
version of evaluating ACPI _OST method.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename acpi_evaluate_hotplug_ost() to acpi_evaluate_ost() for later
resue.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We put fans to full speed in acpi_fan_suspend(), but that is only
needed in the hibernation case when we are generating hibernation
image, so this patch removes that when we are about to suspend or
poweroff.
References: http://www.spinics.net/lists/linux-acpi/msg48636.html
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit moves ISA-specific code to separate function and makes that
function depend on CONFIG_{E}ISA so that we do not have to maintain
acpi_isa_irq_to_gsi() function for architectures which do not support ISA.
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit 2d4054d842 (ACPI: Blacklist Win8 OSI for some HP
laptop 2013 models) that is not necessary any more after previous
commit 1811fcb029fa (ACPI / video: Add systems that should favour native
backlight interface).
Requested-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some system's ACPI video backlight control interface is broken and the
native backlight control interface should be used by default. This patch
sets the use_native_backlight parameter to true for those systems so
that video backlight control interface will not be created. For detailed
models that are added here, reference the following list.
Note that the user specified kernel cmdline option will always have the
highest priority, i.e. if use_native_backlight=0 is specified and the
system is in the DMI table, the video module will not skip registering
backlight interface for it.
Thinkpad T430s:
Reported-by: Theodore Tso <tytso@mit.edu>
Reported-and-tested-by: Peter Weber <bugs@ttyhoney.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
Thinkpad X230:
Reported-and-tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
ThinkPad X1 Carbon:
Reported-and-tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Lenovo Yoga 13:
Reported-by: Lennart Poettering <lennart@poettering.net>
Reported-and-tested-by: Kevin Smith <thirdwiggin@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=63811
Dell Inspiron 7520:
Reported-by: Rinat Ibragimov <ibragimovrinat@mail.ru>
Acer Aspire 5733Z:
Reported-by: <sov.info@mail.ru>
References: https://bugzilla.kernel.org/show_bug.cgi?id=62941
Acer Aspire V5-431:
Reported-by: Thomas Christensen <christensenthomas@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=68751
HP ProBook 4340s:
Reported-and-tested-by: Vladimir Sherenkov <a_12300@mail.ru>
References: http://redmine.russianfedora.pro/issues/1258
HP EliteBook/ProBook 2013 models, ZBook and some others:
Provided-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some devices have duplicate entries in there brightness levels table, ie
on my Dell Latitude E6430 the table looks like this:
[ 3.686060] acpi backlight index 0, val 80
[ 3.686095] acpi backlight index 1, val 50
[ 3.686122] acpi backlight index 2, val 5
[ 3.686147] acpi backlight index 3, val 5
[ 3.686172] acpi backlight index 4, val 5
[ 3.686197] acpi backlight index 5, val 5
[ 3.686223] acpi backlight index 6, val 5
[ 3.686248] acpi backlight index 7, val 5
[ 3.686273] acpi backlight index 8, val 6
[ 3.686332] acpi backlight index 9, val 7
[ 3.686356] acpi backlight index 10, val 8
[ 3.686380] acpi backlight index 11, val 9
etc.
Notice that brightness values 0-5 are all mapped to 5. This means that
if userspace writes any value between 0 and 5 to the brightness sysfs attribute
and then reads it, it will always return 0, which is somewhat unexpected.
This is a problem for ie gnome-settings-daemon, which uses read-modify-write
logic when the users presses the brightness up or down keys. This is done
this way to take brightness changes from other sources into account.
On this specific laptop what happens once the brightness has been set to 0,
is that gsd reads 0, adds 5, writes 5, and on the next brightness up key press
again reads 0, so things get stuck at the lowest brightness setting.
Filtering out the duplicate table entries, makes any write to brightness
read back as the written value as one would expect, fixing this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Intel BayTrail LPSS consists of two PWM controllers which can
be enumerated from ACPI namespace. This change will cause
platform device objects to be created for Intel BayTrail PWM
controllers which will allow the pwm-lpss driver to bind to them
and handle those devices.
Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce a new function map_gic_id() to allow APIC IDs to be obtained
from the GIC Structure introduced by ACPI 5.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
idle_boot_override depends on x86 and ia64 now and it is not clear
whether or not it will be used on ARM or ARM64, so put the DMI
blacklist setting it in processor_core.c into a #if block so that
it is built for CONFIG_X86 or CONFIG_IA64 only to allow
processor_core.c to be compiled for ARM64.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace "ACPI0007" with ACPI_PROCESSOR_DEVICE_HID to improve code
readability.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The return value type of acpi_processor_eval_pdc() should be
'acpi_status' but is defined as 'int', so fix it.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Nothing cares about ACPI_PROCFS. This has been the case since v2.6.38.
This Kconfig symbol serves no purpose and its help text is now
misleading. It can safely be removed. If this symbol would be needed
again in the future it can be readded in a commit that adds code that
actually uses it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_pci_link_allocate_irq() can return negative gsi even if
entry != NULL. For that case we have a memory leak, so free
entry before returning from acpi_pci_irq_enable() for gsi < 0.
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI_APEI already depends on X86, so there is no need to define
such dependency for ACPI_APEI_GHES (Generic Hardware Error Source)
again.
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To allow user space to check which ACPI device object the dock
station is represented by, make acpi_dock_add() indicate to
platform_device_register_full() which ACPI device object should
be the companion of the new platform device.
This also ensures that the ACPI device object in question will
not go away while the dock platform device is present (which is
always).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since we already know what the device's PNP IDs are when
acpi_device_is_battery() is called, it is not necessary to run
acpi_get_object_info() for the device in that function. Instead, if
acpi_device_is_battery() is passed a pointer to a struct acpi_device
object, it can use the list of PNP IDs from that object, so make that
happen and modify the function's header accordingly
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI dock station code carries out an extra namespace scan
before the main one in order to find and register all of the dock
device objects. Then, it registers a notify handler for each of
them for handling dock events.
However, dock device objects need not be scanned for upfront. They
very well can be enumerated and registered during the first phase
of the main namespace scan, before attaching scan handlers and ACPI
drivers to ACPI device objects. Then, the dependent devices can be
added to the in the second phase. That makes it possible to drop
the extra namespace scan, so do it.
Moreover, it is not necessary to register notify handlers for all
of the dock stations' namespace nodes, becuase notifications may
be dispatched from the global notify handler for them. Do that and
drop two functions used for dock notify handling, acpi_dock_deferred_cb()
and dock_notify_handler(), that aren't necessary any more.
Finally, some dock station objects have _HID objects matching the
ACPI container scan handler which causes it to claim those objects
and try to handle their hotplug, but that is not a good idea,
because those objects have their own special hotplug handling anyway.
For this reason, the hotplug_notify flag should not be set for ACPI
device objects representing dock stations and the container scan
handler should be made ignore those objects, so make that happen.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After recent ACPI core changes acpi_bus_get_device() will always
succeed for dock station ACPI device objects, so show_docked()
should not use that function's return value as an indicator of
whether or not the dock device is present.
Make it use acpi_device_enumerated() for this purpose.
Fixes: 202317a573 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Sometimes, there might be bugs caused by unexpected AML which is compliant
to the Windows but not compliant to the Linux implementation.
There is a predefined validation mechanism implemented in ACPICA to repair
the unexpected AML evaluation results that are caused by the unexpected
AMLs. For example, BIOS may return misorder _CST result and the repair
mechanism can make an ascending order on the returned _CST package object
based on the C-state type.
This mechanism is quite useful to implement an AML interpreter with better
compliance with the real world where Windows is the de-facto standard and
BIOS codes are only tested on one platform thus not compliant to the
ACPI specification.
But if a compliance issue hasn't been figured out yet, it will be
difficult for developers to identify if the unexpected evaluation result
is caused by this mechanism or by the AML interpreter.
For example, _PR0 is expected to be a control method, but BIOS may use
Package: "Name(_PR0, Package(1) {P1PR})".
This boot option can disable the predefined validation mechanism so that
developers can make sure the root cause comes from the parser/executer.
This patch adds a new kernel parameter to disable this feature.
A build test has been made on a Dell Inspiron mini 1100 (i386 z530)
machine when this patch is applied and the corresponding boot test is
performed w/ or w/o the new kernel parameter specified.
References: https://bugzilla.kernel.org/show_bug.cgi?id=67901
Tested-by: Fabian Wehning <fabian.wehning@googlemail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This urgent patch is cherry picked from ACPICA upstream.
It is reported that some platforms fail to boot without this new _OSI
string.
This change adds this string for Windows 8.1 and Server 2012 R2.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Bob Moore <Robert.Moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix incorrect sscanf() string in function acpi_battery_alarm_store().
Signed-off-by: Luis G.F <luisgf@luisgf.es>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI thermal driver defines acpi_thermal_resume() when
CONFIG_PM_SLEEP is defined. This results in the following compile
error when CONFIG_PM_SLEEP is undefined.
CC drivers/acpi/thermal.o
drivers/acpi/thermal.c:107:8: error: ‘acpi_thermal_resume’ undeclared here (not in a function)
make[2]: *** [drivers/acpi/thermal.o] Error 1
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI SBS driver defines acpi_sbs_resume() when CONFIG_PM_SLEEP is
defined. This results in the following compile error when CONFIG_PM_SLEEP
is undefined:
CC [M] drivers/acpi/sbs.o
drivers/acpi/sbs.c:674:8: error: ‘acpi_sbs_resume’ undeclared here (not in a function)
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI fan driver defines acpi_fan_suspend() and acpi_fan_resume()
when CONFIG_PM_SLEEP is defined. This results in the following compile
errors when CONFIG_PM_SLEEP is undefined:
drivers/acpi/fan.c:60:8: error: ‘acpi_fan_suspend’ undeclared here (not in a function)
drivers/acpi/fan.c:60:8: error: ‘acpi_fan_resume’ undeclared here (not in a function)
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI button driver defines acpi_button_resume() when
CONFIG_PM_SLEEP is defined. This results in the following
compile error when CONFIG_PM_SLEEP is undefined:
drivers/acpi/button.c:85:8: error: ‘acpi_button_resume’ undeclared here (not in a function)
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI battery driver defines acpi_battery_resume() when
CONFIG_PM_SLEEP is defined. This results in the following compile
error when CONFIG_PM_SLEEP is undefined:
drivers/acpi/battery.c:847:8: error: ‘acpi_battery_resume’ undeclared here (not in a function)
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI AC driver defines acpi_ac_resume() when CONFIG_PM_SLEEP is
defined. This results in the following compile error when
CONFIG_PM_SLEEP is undefined:
drivers/acpi/ac.c:248:8: error: ‘acpi_ac_resume’ undeclared here (not in a function)
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-dock:
ACPI / dock: Use acpi_device_enumerated() to check if dock is present
* acpi-scan:
ACPI / container: Fix error code path in container_device_attach()
* acpi-pci-hotplug:
ACPI / hotplug / PCI: Relax the checking of _STA return values
To avoid leaking memory on errors from device_register(), do a
put_device() on the device object in question in the error code
path of container_device_attach().
Fixes: caa73ea158 (ACPI / hotplug / driver core: Handle containers in a special way)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Add a new routine, acpi_lpss_set_ltr(), for setting latency tolerance
values for LPSS devices having LTR (Latency Tolerance Reporting)
registers. Add .bind()/.unbind() callbacks to lpss_handler to set
the LPSS devices' power.set_latency_tolerance callback pointers to
acpi_lpss_set_ltr() during device addition and to clear them on
device removal, respectively.
That will cause the device latency tolerance PM QoS to work for
the devices in question as documented.
This changeset includes a fix from Mika Westerberg.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In some cases it may be necessary to perform certain setup/cleanup
operations on a device object representing a physical device after
it has been associated with an ACPI companion by acpi_bind_one() or
before disassociating it from that companion by acpi_unbind_one(),
respectively. If there is a struct acpi_bus_type object for the
given device's bus type, the .setup()/.cleanup() callbacks from there
are executed for these purposes. However, an analogous mechanism will
be necessary for devices whose bus types don't have corresponding
struct acpi_bus_type objects and that have specific ACPI scan handlers.
For those devices, add new .bind() and .unbind() callbacks to struct
acpi_scan_handler that will be executed by acpi_platform_notify()
right after the given device has been associated with an ACPI
comapnion and by acpi_platform_notify_remove() right before calling
acpi_unbind_one() for that device, respectively.
To make that work for scan handlers registering new devices in their
.attach() callbacks, modify acpi_scan_attach_handler() to set the
ACPI device object's handler field before calling .attach() from the
scan handler at hand.
This changeset includes a fix from Mika Westerberg.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch enables resource dump functions for debugging purpose where
ACPI_DEBUG_OUTPUT is enabled. Such functions are useful for developers
to track kernel issues when composing debugging patches. They will be
optimized out during link stage for normal builds.
This patch updates the compilation condition used for the resource dump
related string tables to match the compilation environment used for
rsdump.c and rsdumpinfo.c.
This patch can help to improve the ACPICA release automation. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This command "test objects" will exercise the entire namespace by
writing new values to each data object, and ensuring that the write
was successful. The original value is then restored and verified.
This patch doesn't affect kernel behavior as the debugger is
currently not shipped in the Linux source tree.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change fixes the support to allow references (namespace nodes)
to be passed as arguments to control methods via the evaluate object
interface. This is probably most useful for testing purposes, however.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update ACPICA copyrights to 2014. Includes all source headers and
signons for the various tools.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add the following checks:
1) The incoming device handle refers to type ACPI_TYPE_DEVICE.
2) There is not already a gpe block attached to the device.
Likewise, with acpi_remove_gpe_block, ensure that the incoming object
is a device.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The utility has the capability to load some various tables to test
features of ACPICA. However, there are enough of them that the output
of the utility became confusing. With this change, only the required
local tables are displayed (RSDP, XSDT, etc.) along with the actual
tables loaded via the command line specification. This makes the
default output simler and easier to understand. The -el command line
option restores the original behavior for testing purposes.
This patch doesn't affect kernel behavior as Linux doesn't use ACPICA
allocation tracking implementation.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Similar to the earlier tbprint.c change.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change improves the support for physical addresses in printf
debug statements and other output on both 32-bit and 64-bit hosts.
It consistently outputs the appropriate number of bytes for each
host. The %p specifier is unsatisfactory since it does not emit
uniform output on all hosts/clib implementations (on some, leading
zeros are not supported, leading to difficult-to-read output).
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit 202317a573 (ACPI / scan: Add acpi_device objects for
all device nodes in the namespace) acpi_bus_get_device() will always
return 0 for dock devices in dock_notify(), so the dock station
docking code under ACPI_NOTIFY_DEVICE_CHECK will never be executed
and docking will not work as a result of that.
Fix the problem by making dock_notify() use acpi_device_enumerated()
to check the presence of the device instead of checking the return
value of acpi_bus_get_device().
Fixes: 202317a573 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
